Documentos de Académico
Documentos de Profesional
Documentos de Cultura
GENERAL PROCEDURES
Differential Draining and Filling NOTE: For roll stability control (RSC) equipped
vehicles, remove the rear wheel speed sensor plug.
Special Tool(s) For non-RSC vehicles, remove the rear wheel speed
sensor.
Oil Suction Gun
303-D104 (D94T-9000-A) or 5. Remove the rear wheel speed sensor.
equivalent
1 Disconnect the rear wheel speed sensor
electrical connector.
2 Remove the bolt.
3 Remove the rear wheel speed sensor.
Material
Item Specification
Motorcraft SAE 75W-140 WSL-M2C192-A
Synthetic Rear Axle
Lubricant
XY-75W140-QL (US);
CXY-75W140-1L
(Canada)
Fluid Check
Fluid Drain and Fill 7. Install the anti-lock brake system (ABS) sensor
and ABS sensor bolt.
1. Remove the drain plug. • Tighten to 27 Nm (20 lb-ft).