Cristopher Hernández Microcontroladores Diferencia principal entre un ordenador y un Arduino: las entradas y salidas que conectamos. Analogía: Arduino es un Autómata programable, Raspberry Pi es un Ordenador, así que a la hora de decidirse que utilizar para un proyecto pensar que usaríamos un autómata o un Ordenador. Arduino Mega 2560 Microcontroller ATmega2560 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz LED_BUILTIN 13 Length 101.52 mm Width 53.3 mm Weight 37 g Tiva C • High Performance TM4C123GH6PM MCU: • 80MHz 32-bit ARM Cortex-M4-based microcontrollers CPU • 256KB Flash, 32KB SRAM, 2KB EEPROM • Two Controller Area Network (CAN) modules • USB 2.0 Host/Device/OTG + PHY • Dual 12-bit 2MSPS ADCs, motion control PWMs • 8 UART, 6 I2C, 4 SPI • On-board In-Circuit Debug Interface (ICDI) • USB Micro-B plug to USB-A plug cable • Preloaded RGB quick-start application • ReadMe First quick-start guide RaspBerry Pi B3 • A 1.2GHz 64-bit quad-core ARMv8 CPU • 802.11n Wireless LAN • Bluetooth 4.1 • Bluetooth Low Energy (BLE) • 1GB RAM • 4 USB ports • 40 GPIO pins • Full HDMI port • Ethernet port • Combined 3.5mm audio jack and composite video • Camera interface (CSI) • Display interface (DSI) • Micro SD card slot (now push-pull rather than push-push) • VideoCore IV 3D graphics core Programación • El dispositivo IOT • La plataforma en la nube • Los dispositivos que consumen la información en la plataforma de IOT Formato IEEE • Titulo • Datos del autor • Resumen (Ingles y español) • Palabras clave • Introducción • Contenido • Referencias • https://es.slideshare.net/dmcuenca4/formato-ieee-12580817