Documentos de Académico
Documentos de Profesional
Documentos de Cultura
2 SUMMARIZATION ...................................................................................................................................... - 2 -
5 OPERATION ............................................................................................................................................... - 10 -
7 COMMUNICATION ................................................................................................................................... - 15 -
18 APPENDIX ............................................................................................................................................. - 38 -
LP1 Printer
4P9D Cable
PC Disk
User manual
-1-
2 SUMMARIZATION
-2-
2.3 Dimension
Unit: mm
ON OFF
Ethernet port, connect to PC. Use to download data from PC or connect to scale
-3-
3 KEYBOARD LAYOUT
Confirm key
. Press key [SHIFT] [COPY] to copy the last label, and stops until you press key [C]
Decimal point
Combine with numerical key shift digits to bar code number
Clear data
Paper feeding
-4-
4 HOW TO INSTALL PAPER
-5-
Label paper installation
5. Rip off several labels in the front part of the paper 6. Roll the release paper in the re-winder axis. Put
roll,and insert the release paper to the re-winder. on the paper-blocker and close the printer head
-6-
Receipt paper installation
5. Load the receipt paper like the picture shows. 6. Put on the paper-blocker and close the
(directly lead the thermal paper to the paper outlet) printer head.
-7-
Lineless paper installation
5. Load the receipt paper like the picture shows and then shut up the flake.
-8-
Paper-block installation(Mechanism picture )
If the paper-blocker drops out, please install it to the axis in time to avoid loss. Clip it to the axis
and pull it parallel to the end of the axis as the below pictures show.
-9-
5 OPERATION
5.1 Operator
Method 2:
1) Open Link32
2) Open PLU manager table → Press menu ―Option‖ → select ―Information‖
3) Input the name in "Seller" column and press key "Ok".
4) Press menu Red Arrow to download these operator information to LP1.
- 10 -
4) Press Red Arrow in the toolbar to download these temporary messages to LP1.
Note: here you could input 8 different temporary name, but only the front 4 name could be supported by
LP1. We will modify LP1 to support more temporary information in the future. Please wait for it.
There are totally 4 different kind of model for LP1 to print our label or receipt under different format. Please
follow the operation below on how to select different model:
Press key ‗System set‘ for 2 or 3 seconds, then through the key ‗←‘ or ‗→‘ to find out menu ‗Print format‘:
0: label means Label mode, printer will only print Label.
1: plu-wt means Normal Label/Receipt model.
Printer will print label or receipt under one PLU one weight.
2: n(plu-wt) means Multi PLU Receipt model (Products in Column–Different)
Printer could print one receipt with many PLU as described in below way:
1) Put Product on scale to obtain its weight value
2) Enter PLU code to print connected information
3) Repeat step 1) to 2) to print connected information of other PLU
4) After all PLU printed out, please press key ―Print‖ to print out the tail message to finish this operation.
3: plu-nwt means One PLU with Multi-weight receipt model (Products in Column—Same)
Printer could print one receipt with one PLU and many weights as described in below way:
- 11 -
1) Put Product on scale to obtain its weight value
2) Enter PLU code to print connected information
3) Repeat step 1) and press key 6 to print connected weight of the same PLU
4) After all weights printed out, please press key ―Print‖ to print out the tail message to finish this operation.
1. Ticket Number
‗System set → ticket No‘ to set Start Ticket Number.
The default Start Number is 1
And the Max Number is 65535.
2. Total Function
‗System set → Prn All Stat. plu (Print receipt) → Input Operator code‘
All sales information of this operator will be printed out.
The max capacity which LP1 could store is 30000 weights.
- 12 -
6 PC SOFTWARE INSTALLATION
Click it.
Click it.
- 13 -
Click it.
Click it to finish
installation.
- 14 -
7 COMMUNICATION
Before you download data or driver, you need to test the communication.
PC
Note: use Ethernet cable to connect LP1X to PC or use RS232 port to connect LP1X to PC
3. Choose the button and click it, then, start to test communication.
<Communicating>
- 15 -
Communication is OK
<Result>
2. Click button
Input LP‘s
IP address.
Click ‗OK‘ to start
download.
Note: if you connect LP to PC via RS232, then you should choose ‘RS-232’, choose COM port and the baud
rate ‘9600’, and input the series number of the LP1X in ‘Scale S/N’.
- 16 -
3. Save the PLU data
- 17 -
9 HOW TO CREATE HOTKEY
You can input number directly to distribute hotkey for PLU, or distribute the hotkey by ―PLU manager‖.
Method 1:
1) Open ‗PLU manager‘, double click the column ‗hotkey‘ to edit it, and then click to save. You can
revise hotkey in the same way.
2)
Click here
- 18 -
4) Set Generate Hotkey:
Method 2:
1) Download a PLU file:
Click , select a PLU file, and click ―open‖ to download it.
2) A popup window prompts:
- 19 -
10 HOW TO PRINT HOTKEY
Choose this
hotkey sheet type.
- 20 -
2. Click ‗File/Hotkey sheet input‘ to set the hotkey table in the following interface:
first page: Font --- set the characters‘ font on hotkey table.
Load Plu --- click this item, you can choose the PLU in the pop-up window:
- 21 -
Background --- set background color for the hotkey table.
Clear --- clear all messages on the hot key table.
Default background --- set the default background color of the hotkey table.
second page: you can set two levels of each hotkey. This item is to set the second level on hotkey table. It is
similar to the item ‗first page‘.
all page: Font --- set the characters‘ font on hotkey table.
Clear --- clear all messages on the hot key table.
default Font --- set the characters‘ default font on hotkey table.
Price Visible --- set whether to show the price of each PLU on the hotkey table.
Load Image --- set image for the corresponding PLU.
Delete Image --- delete the selected image.
Use second page: choose this item to use the second level on hotkey table.
Cancel second page: this is to cancel all messages of the second level on hotkey table.
Note:
1. If you want to sell the PLU by using second page hotkey, please press key [SHIFT] and then enter
hotkey number. For example: use hotkey 37. Press key [SHIFT][37].
2. You also can create the hotkey table by this method: click ‘File/Hotkey sheet input’ to enter the
hotkey setting interface, press the button ‘Create’, and then the whole hotkey table will be created
automatically.
- 22 -
4. Print the hotkey: click ‗File/hotkey sheet Print…‘.
4. Cut a hotkey sheet down and insert the hotkey sheet into the keyboard.
- 23 -
- 24 -
11 Programming Label
Open link32, and Click to open ―label editor‖, there is a default label appearing automatically, such as:
Click bar sign ‗ ‘ in the right to set the label components‘ size, font, and format, etc.
Click the first bar ‗ ‘ and then you can see the interface below.
This is to edit the components‘ position in the label.
Click it to choose the item that you want to edit.
‘Format’: there are two formats for this printer, Ean-13 and Int15. Choose the format that you want. We usally
apply the format ‗Ean-13‘. Please refer to Chapter 18.4 for details.
‘Direction’: the direction of the barcode. 0 – level; 90 – vertical (barcode number is on the right); 270 – vertical
(barcode number is on the left).
‘Size’: the size of the barcode. You can select the size that is to your taste.
Click the third bar ‗ ‘ and then you can see the interface below.
This is to edit the components‘ size (except for ‗Barcode‘) in the label.
Note: this column can be used by the condition that the first bar selects any other items except for
‘Barcode’.
- 26 -
11.2 Create a new label
Note: if you choose ‘Common Label’, it will be printed at the common width (no more than 56). But if
you have input the digit n (56<n<109) in width, and input the digit n (0<n<56) in height, then you must
choose ‘Rotate Label’, or the label cannot be printed since the Max. print width of the printer is only
56mm.
- 27 -
11.3 Edit the label
1) Choose ‗component‘ tool bar
A B C D E F G H I J K L M N O
- 28 -
Finish the component editing. This is the sample after component edit:
Click the item in the tool bar, and then click the label to edit the label background. Click to select the
background and keep it, the background can be moved to any position.
- 29 -
Click to select the background and keep it, and drag it out of the label to eliminate it; or you can use
rubber in the tool bar to erase it.
A B C D E F G H I J K L
a b c d e f g
4) You can also paste a preparative BMP graph as the label background picture.
Note: this operation is dispensable.
- 30 -
Finish label editing. This is the label sample that we have edited just now:
- 31 -
11.4 Download label format
Open ‗Label editor‘→press to select a label format which has been edited before→press to
download.
There is a popup window, select ―TCP/IP‖ and enter current LP‘s IP address:
Click ―Y‖ to confirm, then begin downloading, and it appears the popup window:
Click OK to finish.
- 32 -
12 SYSTEM SET MODE
- 33 -
Set parameters in PC software
Open link32, and Click ,
The printer supports 10000 kinds of PLU. You can set 72 kinds of them to hotkey.
PLU which hotkey number is in Press key and Sell PLU which hotkey number is 56
the range of 37-72
hotkey number +
PLU without hotkey Press key Sell PLU which LF code is 69025, and has no
hotkey number
and the PLU LF code
+ [69025]
Note: if the LP1X isn’t connected with the scale, then you should choose the unit of the PLU as ‘PCS’, or
the label cannot be printed. Please refer to Chapter 8, Point 1.
14 COPY LABEL
LP1X will print the last label one by one until appointed sheets finished.
- 36 -
15 MODIFY PLU INFORMATION
XXXXXX input PLULF code XXXXXX and press the key to confirm
Open PC software ‗Nim‘, set nutrition component, and then download the information to LP1X.
After you sell PLU, the LP1X will print the corresponding nutrition label.
- 37 -
18 APPENDIX
On the table below, the special characters No.1~ No.14 are for Portuguese and Spanish, No.15~ No.20 are
only for Spanish, and No.21~ No.42 are for Portuguese only.
It‘s no problem in having all the special characters on the keyboard at the same time. Please don‘t worry.
Lastly, please note, remember don‘t unlash the ―Shift‖ key until you pressed the corresponding key.
2 á á owercase a-acute F5
4 é é Lowercase e-acute F6
6 í í Lowercase i-acute F7
8 ó ó Lowercase o-acute F8
10 ú ú Lowercase u-acute F9
13 ? ? Question mark ?
14 ! ! Exclamation point !
- 39 -
DLP101ARV0--03