Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Quantity
of items
Item Description Notes
included
in product
Printed Circuit Boards (PCB) or Printed Circuit With a surface greater than 10 sq cm 1
Assemblies (PCA)
Batteries All types including standard alkaline and lithium coin 1
or button style batteries
Mercury-containing components For example, mercury in lamps, display backlights, 0
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater Includes background illuminated displays with gas 0
than 100 sq cm discharge lamps
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring 0
greater than 2.5 cm in diameter or height
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent 0
including liquids, semi-liquids (gel/paste) and toner chambers, and service stations.
Components and waste containing asbestos 0
Components, parts and materials containing 0
refractory ceramic fibers
EL-MF877-00 Page 1
Template Revision B
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
Step:
1. Put the LCM on support fixture.
Fig.2
Step:
MIC/B Model Camera/B Model 1. disassembly bezel in order. (Fig.1)
2. Recycle bezel.
For MIC/B Model: plug (Fig.2)
For Camera/B Model: lens (Fig.3)
Black plug Transparent
lens
Fig.2 Fig.3 Model P/N Print
Cyclone 6070B0685901 650
Thriller 6070B0685902 655
2
2
Fig.1
Step:
1 4 1. Loosen LCD screw (6052A0035101) * 4.
(Fig.1)
2 3
Fig.1
Step:
1. Take the LCM module on the working table
(Fig. 1)
2. Rip the mylar, then disconnect the LCD
cable. (Fig.1)
3. Recycle LCM module
Fig.1
Step:
1. Loosen hinge BRKT screw (6052B0096201)
* 6. (Fig.1 / Fig.2)
1 5 6
3 2
Fig.2
Fig.1
Step:
1. Loosen screw (6052B0120001) * 2. (Fig.2)
Fig.2 Fig.1
Step:
1. disassembly the left side WWAN / WLAN
antenna.
(Fig.1)
Fig.1
Step:
1. disassembly the right side LCM cable. (Fig.1)
Fig.1
Step:
1. Rip the AL foil, disassembly the left side WLAN
(MAIN). (Fig.1 / Fig.2)
Fig.2
Step:
1. Rip the AL foil, disassembly the left side
WWAN(MAIN). (Fig.1)
Fig.1
Step:
1. For camera model : Rip webcam gasket
(6054B0788001) * 2.( Fig. 1 & Fig. 2)
Fig.1
2. disassembly camera/B (or MIC/B) (Hold the
two sides.) (Fig.3)
Fig.3
Step:
1. Rip the AL foil, disassembly the left side
WLAN (AUX) (Fig.1) and recycle it .
WLAN (AUX)
Vendor WLAN AUX P/N
ACON 6036B0115101
WNC 6036B0115201
Fig.1
Step:
1. Rip the AL foil, disassembly the left side
WWAN (AUX) (Fig.1) and recycle it .
Fig.1
Step:
1. Recycle BTDL (6070B0686101).
Fig.1
Fig.2
Step:
1. Turn the computer over. (Fig.1)
Battery
Battery Latch
Fig.1
Step:
1. Slide the door latch to the unlock position.
(Fig.1)
Fig.2
Door Latch
Fig.1
Step:
[With ODD SKU]
1. Loosen ODD screw * 1, then remove the ODD.
(Fig.1)
Fig.1
Fig.2
Step:
[ Ignore below procedures for the SKU
without Modem ]
1. Loosen M2x3 screw (6052A0035101) * 2.
(Fig.1)
Fig.1
Fig.2
Step:
[ Ignore below procedures for the SKU
without Modem ]
1. Disconnect RJ11 cable from modem. (Fig.1)
Fig.1
Fig.2
Step:
[ Ignore below procedures for the SKU
without WWAN ]
1. disassembly WWAN cables from WWAN
module. (Fig.1)
Fig.1
Fig.2
Step:
1. Loosen fan set screw (6033B0034401) * 2.
(Fig.1)
Fig.1
Step:
1. Loosen HDD BRKT set screw * 4. (Fig.1)
3 2
1
4
Fig.1
Step:
1. Disconnect HDD cable (6017B0362201) from
HDD. (Fig.1)
Fig.2
Fig.3
Fig.4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver #1 1
Step:
1. Loosen K/B set screw * 2. (Fig.1)
4
1
2 Fig.2
Fig.1
Step:
[ For Point Stick]
1. Turn the computer over, then open it.
Fig.1
3. Disconnect K/B FPC from M/B CNTR. (Fig.2)
Fig.2
Fig.3
Step:
[For Non-Point Stick]
1. Turn the computer over, then open it.
Fig.2
Fig.3
Step:
1. disassembly power/B FFC , function/B FFC
from M/B. (Fig.1)
Function/B CNTR
Power/B CNTR
Fig.1
Mylar
Mylar
Fig.2
Step:
1. Loosen screw - M2.5x6 (6052B0185501) * 2.
(Fig.1)
1 2
Fig.1
Fig.2
Step:
1. Loosen screw - M2.5x4 (6052A0005201) * 4.
(Fig.1)
3 2 1
Fig.1
Step:
1. Loosen screw - M2.5x6 (6052B0185501) * 5.
(Fig.1)
3 4 5
1
2
Fig.1
Step:
1. Loosen screw - M2.5x6 (6052B0185501) * 5.
(Fig.1)
4
1
2
3
Fig.1
Step:
1. Loosen screw - M2.5x6 (6052B0185501) * 5.
(Fig.1)
1 5
4
3
Fig.1
Step:
1. Separate BTCB from TPCB. (Fig.1)
Fig.1
Fig.2
Step:
1. disassembly the two DDRs.
Slot-2
Slot-1
Fig.1
Step:
1. disassembly antenna. (Fig.1 / Fig.2)
Fig.1
[WITH WWAN CNTR M/B]
Fig.3
Fig.2
[W/O WWAN CNTR M/B]
Step:
1. disassembly smart card FFC from M/B.
(Fig.1)
[With FP SKU]
2. disassembly finger printer FFC from M/B.
(Fig.2)
Fig.2
Fig.1
Step:
1. Loosen screw - M2x2 (6052B0156301) * 1.
(Fig.3)
Fig.1
Fig.2
Fig.3
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver #1 1
Step:
1. Loosen screw - M2x12 (6052B0127701) * 2.
(Fig.1)
Fig.1
Fig.2
Step:
1. Loosen screw - M2x3 (6052A0035101) * 3
1 (mark : Δ ) .(Fig.1)
3
2. disassembly USB/B . (Fig.1)
2
Fig.1
Step:
1. disassembly speaker CNTR – L from M/B.
(Fig.1)
Fig.1
Fig.2
Step:
1. Disconnect speaker cable– R from M/B.
(Fig.1)
Fig.1
Fig.2
Step:
2 3
Fig.1
Fig.2
Step:
1. Put the M/B on support fixture. (Fig.1)
Platform P/N
Fig.1 DIS 6043B0141301
Discrete UMA 6043B0141201
Tab. 1
1 3
5
6 4 2 Fig.2
UMA
1 3
4 Fig.3
2
Step:
1. Put the M/B on support fixture. (Fig.1)
Fig.2
Fig.3 Fig.4
Step:
1. Inspect M/B. (Fig.1 / Fig.2)
Fig.1
Fig.2
Step:
1. Loosen speaker screw (6052A0035101) * 1,
disassembly speaker – R (6039B0058702)
(Fig.2 / Fig.3)
Speaker-L
2. Loosen speaker screw (6052A0035101) * 1,
Speaker-R
disassembly speaker – L (6039B0058701)
Fig.1 Fig.2 (Fig.1 / Fig.4)
Fig.3
Fig.4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver (#1) 1
Step:
1. Loosen screw - M2x3 (6052A0035101) * 1,
disassembly bracket (6053B0927201) from
Fig.1 TPCB (Fig. 4) .
Fig.2
[ For Without Finger Printer ]
2. disassembly dummy (6051B0793801) from
TPCB. (Fig.3)
Fig.3
上侧先插入上壳
Fig.1
Fig.4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver (#1) 1
Step:
1. Loosen hinge cover screw - M2.5x4
(6052A0005201) * 3. (Fig.2)
Fig.1
2. disassembly hinge cover (6051B0807401).
(Fig.1)
3
2
1
Fig.2
Step:
1. Loosen screw (6052A0005201) * 2.
(Fig.2 / Fig.3)
Fig.1
Fig.2
1
Fig.3
Fig.4 Fig.5
Step:
1. Recycle TPCB.
2 KEY – Fig.1 / Fig.2
4 KEY – Fig.3 / Fig.4
2 key Fig.1
2 key
Fig.2
4 key 4 key
Fig.3 Fig.4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Step:
1 2
1. Loosen screw - M2x3 (6052A0035101) * 2,
disassembly RS232 cable (6017B0438701)
from BTCB. (Fig.1)
Fig.1
Step:
[ W/ RJ11 SKU]
1. Rip the acid tape (6054A0076201) * 2,
disassembly RJ11 cable (6017B0440301).
(Fig.1 / Fig.2)
Fig.1
Dummy Fig.3
Step:
1. Recycle 15” BTCB (6070B0686301).
(Fig.1 / Fig.2)
Fig.1
Battery Door
Fig.2