Está en la página 1de 2

Guiding Formulation

Waterborne OEM Base Coat


With improved stone-chipping properties

Rec. No. Date Revised:


76-09020 07.03.12 /OK

I Bayhydrol A 145 8,8 www.bayercoatings.de


Bayhydrol UH 2621 13,8 “
Bayhydrol U 241 6,1 “
Water demin. 19,0
Butylglycol 3,3
DMEA 10% in demin. Water 4,5

II Viscalex HV 30 1,0 www.basf.com


Water demin. 11,0

III Cymel 328 3,5 www.cytec.com


Butylglycol 3,3
Water demin. 14,0

IV Aluminium Slurry 11,7

V Aquatix 8421 5,0 www.byk.com


---------
100,0

Coating formulation
Take I and add II, III, IV and V in sequence after stirring times. Before adding Pos. V the pH should
be adjusted with DMEA 10% to 9-9,5
Before application, the pH of the base coat should be tested and if necessary, adjusted with
a 10% aqueous solution of dimethylethanolamine. After pH control adjust spray viscosity with water demin.

Technical data :
Application viscosity, DIN cup, 4 mm approx.. 40s
Thinner demin. Water
pH-value 8.0-8.5
Drying condition approx.. 10 min. 80°C

Re-coatable with common automotive clear coats

This information is for your advice on conscientiously ECKART GmbH


executed tests. Considering the variety of tests this Guentersthal
information is without warranty. 91235 Germany
Fax: ++49 (0) 91 52-77- 45 09
Tel.: ++49 (0) 91 52-77- 45-11 or -0
Seite 1 von 2
Guiding Formulation
Waterborne OEM Base Coat
With improved stone-chipping properties

Rec. No. Date Revised:


76-09020 07.03.12 /OK

Metallic paste

I Butylglycol 41,9
II Bayhydrol E 270 2,9 www.bayercoatings.de
III Disperbyk 180 4,3 www.byk.com
IV Stapa IL Hydrolan D.. 50,6 www.eckart.net
V DMEA 10% in demin. water 0,3
---------
100,0

Metallic paste formulation :

Take I and add II, III, IV and V in sequence, stirring slowly (propeller stirrer), test the
pH-value (pH 8.0-8.5) and if necessary, adjust the paste with a 10% aqueous solution
of dimethylethanolamine. Then stirring for 30 min. by a propeller stirrer at 10.5 m/s
(max. temperature : 50°C).

This information is for your advice on conscientiously ECKART GmbH


executed tests. Considering the variety of tests this Guentersthal
information is without warranty. 91235 Germany
Fax: ++49 (0) 91 52-77- 45 09
Tel.: ++49 (0) 91 52-77- 45-11 or -0
Seite 2 von 2

También podría gustarte