COLORADO ENGINEERING
EXPERIMENT STATION INC.
Turbine Flow Meter
For
Daniel Measurement & Control
SIN: 94-090327
June 25, 2007This report contains calibration results for CEES] Data file(s)
O7DAN-0678
Standard Report Enclosures
Tabulated Results
| Centticate(s) of Calibration
®
Other - Tr
}
Additions
‘Description of test
Electronic format +
Tnstrument list
‘CEESI Technical Note(s)
Curve fitsis) -
Plots)
Flow blew)
Uncertainty analysis
Test set-up diagram
TTT
Procedure(s)
[Additional engineering analysis -
f Special: marcia) —_1
Nunn, Golo, dasa
Phane: 970-8
PAK: 970-897-2790
Gourty Ra. 37
2m
sO
COLORADO ENGINEERING CEESIow:
LABORATORYIOFFICE: EXPERIMENT STATION INC. Jolie ace Low racisry
CERTIFICATE OF CALIBRATION
This ci
ation is traceable to the
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
For: Daniel Measurement and Control Daniel PO: 178409.000 00
Customer:
SO: Customer PO;
Model: Serial Number: 94-090327
intended for use with: Body Serial Number:
Data File: O7DAN-0678 Job: CE04994 Date: 21 June 2007
‘The uncertainty in incicated fowrata is estimated to be +/- 0.5% of reading to 95% confidence,
[he Callration identified by he above CEES! data fle was performed using standards that are
traceable to the National Institute of Standards and Technology.
hs calibration was performed in accordance with CEES! QA Manual (Rev. 1),
Procedure No. 10 and MIL-STD 456624,
‘This Calibration is: [ ] As Found [XI As Left
Loy,
Hebe ih. Elid mame
Quality Assurance ‘On behalf of Cotefado Engineerit
Experiment Station, inc.
Re-caliration is recommended to be no more than 12 months from the date of this Cerlilicate
[nis Certlicate and accompanying data shall not be reproduced, exceptin full, without the wntien
Consent of Colorado Engineering Experiment Station inc.> 2
Fax, 970-097
a
COLORADO ENGINEERING CEESlows
EXPERIMENT STATION INC. uaa Lom cy
ees 20s
he primary souree for ow measure solutions
Calibration of a Turbine Flow Meter
For: Daniel Measurement and Control Daniel PO: 178409-000 00
Customer:
so: Customer PO;
Model: Serial Number: 94-090327
intended for use with: Body Serial Number:
Data File: 07DAN-0678 Job: CE04994 Date: 21 June 2007
Inlet Diameter: 6.0 inches Throat Diameter: 6.0 inches
Test gas: AIR Standard density= 0.074908 lbm/ft®
at standard conditions of 529. 67 °R, and 14.696 Psia
Freq: Meter Output, Hertz (pulses/sec)
ACFM: Volumetric flowrate at meter BODY, actual cubic feet per minute
KFactor: Pulses per cubic foot
ReyNo: Pipe Reynolds number
Density: Flowing density at meter BODY, pounds mass per cubic foot
Pt Freq ACFM Factor ReyNo Density
282.19 .608.27 27.835 533860 0.25384
261.8 606.59 27.874 533500 0.25462
196.49 420.1 27.921 379280 0.25963
195.45 420 27.922 379210 0.2596
139.99 300.42 27.959 269670 0.25817
139.99 300.36 27.963 269620 0.25814
84.076 180.19 27.996 158810 0.25394
84.076 180.18 + 27.997 158890 0.25408
42.133 90.038 28.077 79669 0.25536
42.133 90.087 28.077 79628 0.25523
4.3861 9.3752 28.07 -8129.5_—0.25141
4.3759 9.3659 28.033 8117.5 0.25128
Fgoevoosen-|
Average values for above results:
Pross: 60.455 Psia_ Density: 0.25537 Ibm/ft?
Temp: 533.86 °R Viscosity: 1.0205E-06 Ibm/(inch*sec)
Compressibility factor: 0.99883DAR
ane! Mesturmont ond Contre
Model: Serial Number: 94-090307
For: Danie! Measurement and Control Danie! PO: 178409-000 00
Customer:
SO: Customer Po:
Intended for use with: Body Serial Number:
Sata File: OTDAN-0678 Jeb: CE04994 Date: 21 June 2007
{nlet Diameter: 6.0 inches Throat Diameter: 6.0 inchies,
Test gas: AIF. Standard density= 0.074908 Ibn
at standard conditions of 629.67 °R, and 14.696 Psia
‘eqjeney [PRNTate| Flow Rate Plow Pate | RFaas" |—R Faso] Sapa
fe Laceu | “aor” | mmr | pace | “sume | Sere” | Faves
2518 [ SSS] SIE TOS] THEI TTR
a A a EE
a
ee ee
a a =]
‘39880 | “soo. 1eo2's | sina [-er.sea | —aarsoe—} pase | 20079
sore te02 [joss | 305 [97 gas | seuss tases 2000?
s10re [1e02 | vost0. | “306.197 sa7—| 66 tor] see] eee
42.199 “| 900 {saa 153.0] 2aorr | setae {sae fo
#2135 [900 | si0a2 | “153.028 rr | aot aay} assess ee
4386 g4_ | 5625 | is | 28070 | gai 285-| po}
2376 34—| 620] 1s 8 aa w2sia—] sire
Trerage values Tor above 1650
Press: 50.455 Psia Density: 0.25597 xm
Temp: 59386°RViscoiy: 0208-06 inchs)
Comprsestity factor: 0.99883
| Plot ot kFactr
| ve
| 290
28
| 26
84
S282
| S280 |
| Bae
< a7 ~ |
24 r
ore + t |
| molt ott L L
‘0 S000 10000 15000 2000025000 90000 ss000aongo
| Flow Rate (acth)
Median K-Factor (18% - 100%) = 27.958 PUVAGF
Linearity = + 0.4 %
Repeatabilty = = 0.07 %
Error Band = + 1.0%oo
0
‘nit Nearer ad Contre
Model Serial Numbor: 94-090327
For: Daniel Measurement and Control Daniel PO: 178409.000 00
Customer:
0: Customer PO:
Body Serial Numbar:
Data File: O7DAN-0878 Job: CEO4994 Date: .21 June 2007
Inlet Diameter: 6.0 inches Throal Diameter: 6.0 inches,
‘Test gas: AIR. Standard density 0.074908 lbmilt®
‘at standard conditions of 529.67 °R, and 14.696 Psia
“Average values Tor above resus
Press: 60.455 Psia Density: 0.25537 tort?
‘Temp: §33.86°R Viscosity: 1.0205E-06 IbmAinch'sec)
Compressibilty factor: 0.99883
Plot of K-Factor
Flow Rate
10200
10100
1000.0
90.0
K-Facter (pul)
Flow Rate (mH)
Median K-Factor (15% - 100%) = 987.257 Puli.
Linearity = = 04 %
Repeatability = « 0.07 %
Error Band = «1.0%
Frequency [Flow Raia Flow Rate | Flow Raley) Factor | KFacior | —Bonsly ]Hayaaiis
He acem |_AcéH mene pace | Puma tor? | Number
262.190 | 6083364062 [10035 | o7.836 | —oanaea [05550] Sunes
281.800 | “606.6 [96395.4 “| 1090.6 | 27.874 | 964.361] 028463} saasa0
195.490 |" 420.1 [2506.0 | 713.8 [27.901 | —aa6.0o1 | 025065 —| area
195.460 |" “4200 [252000 “| 713.6 [97.902 | 986.056 | 028080] ~srenro
139.800 {300.4 {180252 | “si0.4_ 27.959] —9a7.363 | 028817 | enero |
139.900 [300.4 | 18021.6 | ~“510.3| 37.963 | 967 504] 0.28814 | —seseoo
84.076 180.2 |" 10811.4 | 306.1 | “27.006 | 988.669] 0.95804] —iseui0
84.076 180.2 | 1810.8 | 306.1 | 27.997 0.25408 [158890
42.138 30.0 5402.3, 158.0__| 28.07 (0.25536 | 7o869
42.133, 90.0 54022 153.0_| 28.07 0.25523 | 7oa2e
4.386 34 562.5 458 [28.070 0.25141 | 8130,
4.576 a4 562.0. 15.9] 28.035,