Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1. Write the elaboration: VLSI, ASIC, CMOS, RTL, FPGA and DFT. 3
3. Draw the schematic of a CMOS inverter and it’s layout. Also draw the transfer characteristics curve
( input-vs-output voltage) of the inverter and indicate the point where current is maximum.
5. What happens to the delay when you (a) decrease the load capacitance (b) include a resistance at the
output. And why?
6. Write the difference between Moore and Mealy type state machine.
10. Write the difference between the latch and flip-flop. Write the HDL code for both Latch and flip-
flop.
12. Can you implement a XOR using 2-to-1 multiplexer(s)? If yes, then implement it.
13. Design a four input NAND gate using two input NAND gates.
17. Define FPGA and ASIC. What is look up table (LUT) in an FPGA? How is ASIC different from
FPGA?
18. Write the difference between a RAM and FIFO. Where is the FIFO used? Is the RAM volatile or
non-volatile?