Documentos de Académico
Documentos de Profesional
Documentos de Cultura
09C gtc
0,OS
ed-Frequency Receiver ci-o-
10,1c.2.
CI 2. Connect channel 1 (X) of the oscilloscope to the NBFM AUDIO OUTPUT of
the FM / PM Receiver. rit
On the oscilloscope screen, you should see the 1.5 kHz signal injected into
the RF Generator.
Slowly vary the frequency using the frequency control of the RF Generator.
How does the-1.5 kHz signal vary with the frequency of the RF signal?
Cl 3. Measure the upper and lower frequency limits of the RF Generator at
which reception is no longer possible. This limit corresponds to a sign) at
the NBFM AUDIO OUTPUT which is so weak that it is no longer visible on
the oscilloscope. (At least 30 dB attenuation).
fpper= /61-z.V MHz
Using a BNC T-connector, connect the True RIMS Voltmeter/ Power Meter
to the RF OUTPUT of the RF Generator. Reduce the OUTPUT LEVEL of
the RF signal. How does the signal vary?