Documentos de Académico
Documentos de Profesional
Documentos de Cultura
LETTER OF APPLICATION/INTENT
December 6, 2016
Dear Sir,
We would like to express our intention to apply for program registration for the
following qualification(s):
FLORIDA R. QUILAS
Center Administrator
Attachments:
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01 F02
CERTIFICATION
FLORIDA R. QUILAS
Center Administrator
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01- F05
Name of Institution
Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Address
Labo Camarines Norte
TESDA SOP-CO-01-F05
Name of Institution
Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Address
Labo Camarines Norte
2. CURRICULAR REQUIREMENTS
a) Competency-based Curriculum
(TESDA-SOP- CO-01-F07) indicating
the qualification being addressed and
the competencies to be developed
a.1 Course Design
a.2 Modules of Instruction
b) List of Equipment (TESDA-SOP-CO-01-
F10), List of Tools (TESDA-SOP-CO-01-
F11), List of Consumables/Materials
(TESDA-SOP-CO-01-F12) necessary to
deliver the program
c) List If Instructional Materials/Library
Holdings (TESDA-SOP-CO-01-F13) such
as reference materials, slides, video
tapes, internet access and library
resource necessary to deliver the
program
d) List of Physical Facilities (TESDA-SOP-
CO-01-F14) and List of Off-Campus
Physical Facilities TESDA-SOP-CO-01-
F15) indicating floor area
e) Shop layout of training facilities indicating
the floor area
f) Institutional Assessment Arrangement
Note: Actual Assessment Tools should be
shown during inspection.
3. FACULTY AND PERSONNEL
a) List of Officials (TESDA-SOP-CO-01-F16)
b) List of Trainers (TESDA-SOP-CO-01-
F17) with their qualifications, areas of
expertise, and courses/seminars attended
with supporting evidence available,
such as relevant NTTC/trainer
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F05
Name of Institution
Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Address
Labo Camarines Norte
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F05
Name of Institution
Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Address
Labo Camarines Norte
____________________ ___________________
UTPRAS Focal Person Expert
____________________
Date
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
COMPETENCY-BASED CURRICULUM
A. Course Design
Trainee Entry
Requirements:
At least Junior High School (Grades 9 & 10) level or
graduate;
Can perform basic mathematical computation; and
Able to communicate orally and in writing
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
Course Structure
Basic Competencies
No. of Hours (28 hours)
Unit of Competency Module Title Learning Nominal
Outcomes Duration
1. Receive and respond to workplace 1.1 Receiving and 1.1.Follow routine 8 hours
communication responding to spoken messages
workplace 1.1-2 Perform
communicati workplace duties
on following written
notices
4. Practice housekeeping procedures 4.1 Practicing 4.1.1 Sort and remove 4 hours
housekeeping unnecessary items
procedures 4.1-2 Arrange items
4.1-3 Maintain work area
tools and equipment
4.1-4 Follow standard
work process and
procedures
4.1-5 Perform work
spontaneously
Common Competencies
No. of Hours (20 hours)
Unit of Competency Module Title Learning Outcomes Nominal
Duration
1. Prepare construction materials and 1.1 Preparing 1.1-1 Identify materials 4 hours
tools constructio 1.1-2 Prepare requisition
n (heavy of materials
equipment) 1.1-3 Receive and inspect
materials materials
and tools.
2. Observe procedures, specifications 2.1 Observing 2.1-1 Identify and access 4 hours
and manuals of instructions procedures, specification /manuals
specificatio 2.1-2 Interpret manuals
ns and 2.1-3 Apply information in
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
manuals of manual
instruction 2.1-4store manuals
3. Perform mensuration and calculation 3.1 Performing 3.1-1 Select measuring 8 hours
mensuratio instruments
n and 3.1-2 Carry out
calculation measurements and
calcilatrion
4. Maintain tools and equipment. 4.1 Maintaining 4.1.1 Check condition of 4 hours
tools and tools and equipments.
equipment 4.1.2 Perform basic
preventive
maintenance
4.1.3 Store tools and
equipment
Core Competencies
No. of Hours (80 hours)
Unit of Competency Module Title Learning Outcomes Nominal
Duration
1. Prepare Plumbing Layout 1.1 Preparing 1.1 Prepare t ools and 8 hours
Plumbing materials
Layout 1.2 Perform stub-out
roughing-in
1.3 Clean up work
maintain tools
2. Make Piping Joints and Coonection 2.1 Making 2.1.1 Fit-up joints and 24 hours
piping fittings for PVC pipe
joints and 2.1-2 Perform pipe joints
connection and connection
2.1-3 Caulk cast iron (CI)
3. Perform Minor Construction Work 3.1 Performing 3.1.1 Make piping layout 32 hours
minor 3.1-2Cut pipes through
constructio walls and floor
n work
4.Install and Assemble Single 4.1 Installing 4.1-1 Prepare for plumbing 30 HOURS
Plumbing Unit and works
assemble 4.1-2 Install pipes and
single fitting
plumbing 4.1-3 Install hot and cold
unit water supply
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
Assessment Methods:
Direct observation
Demonstration
Interview (Oral/Questionnaire)
Course Delivery:
Demonstration
Modular (self-pace)
Film viewing
E-Learning
Industry Immersion
Resources:
(List of recommended tools, equipment and materials for the training of (no. of
trainees) trainees for (title of program/qualification).
TOOLS
Qty Tools Qty. Equipment Qty. Materials
1. Units each size Pipe wrench (size 10 , 1 unit Manual Test 6 rolls Pattern paper
12 , 14)
pump
2. units Pressure gauge 1 unit Fusion 6 boxes Pen and
size-(0- Machine pencil
300psi) (20mm-
32mm)
3 units Pick mattock 4 units Blow 25 pcs 25 pcs PPR Pipes
torch 20mm x mtrs.
6 pcs Steel Tape (5m) 2 units 25 pcs PPR Gate
Electric Valve
grinder (4)
6 pcs Hacksaw with 25 pcs Hard Hat 16 lengths PVC Pipe 4 x
Blade 3m s-1000
4 units Spirit level bar 25 pcs Safety Shoes 25 PVC Wye 4 x
or water hose 4
level
3 units Reamer (pipe) 25 pcs Goggles 150 PVC Wye 4 x
2
4 units Cement trowel 25 pcs Hand Gloves 25 pcs PVC Blue Pipe
(pointed) x 10
6 pcs Cold Chisel (Var. 25 pcs Dust Masks 150 pcs PVC Tee x
lengths 8)
2 units Wheelbarrow 25 pcs Goggles 150 pcs PVC Tee
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
Female
6 units Shovel 25 pcs Hand Gloves 150 pcs PVC Elbow
1/2 x 90
6 pcs Ballpeen 25 pcs Dust Masks 75 pcs PVC Elbow
Hammer (1 12 pcs Face Shield Female x
dia) 90
6 pcs Paint brush (1) 225 pcs PVC Tee 4 150 pcs PVC Cap
x2
3 pcs Pipe Cutter 200 pcs PVC Tee 2 x 100 pcs PVC Cap
(1/2)-1) dia) 2
2 pcs Adjustable 50 pcs PVC Elbow 4 100 pcs PVC Male
Wrench (8) x 90 Adapter
and 10)
2 pcs Mechanical 300 pcs PVC ELBOW 100 pcs. PVC Female
Plier 2 X 90 Adapter
1 unit Pipe vise (Chain 150 pcs PVC Elbow 13 G.I. Pipe x
or Yoke) 2 x 450 20 sch. 40
2 Units Plastic Drum 50 PVC P- Trap 25 pcs Gate Valve
(200 liters) 2 x 20 sch.
2 pcs Pail Plastic / G.I. 25 pcs PVC Cleanout 75 pcs G.I. Tee x
(3 gals.) 4
6 sets Plumbing Blue 15 Solvent 100 pcs G.I. Elbow x
Print Plan Cement 90
400cc
1 set Manual Pipe 50 pcs G.I. Cap n
Threader (1/2,
, 1 sizes)
5 units Basin wrench, 5 pcs Single shower
size 10 valve
150 pcs PPR Tee Equal
20m x 20 mm
225 pcs PPR Tee Female
20mm x
150 pcs PPR Equal
Elbow 20mmx
1/2 x 90
75 pcs PPR End Cap
20mm
150 pcs PPR Male
Adapter
175 pcs G.I Plug
150 rolls Teflon Tape
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F-07
Qualification of
Instructors/Trainers:
Must be a holder of the following degrees:
B.S. Industrial Education (Civil Technology)
Bachelor in Technician Teacher Education (Civil Technology)
B.S. Industrial Engineering
B.S. Industrial Technology (Civil Technology).
B.S. Civil Engineering
Must be a holder of CSC Professional eligibility(for government position)
Preferably with appropriate professional license issued by PRC
Must be a holder of PLUMBER, NC II
Must be a Computer Literate
Must be Physically and mentally fit
*Minimum of 2 years industry experience
TESDA-SOP-01-F07
B. Modules of Instruction
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Module Descriptor: This Module covers the knowledge, skills and attitudes required
to receive, respond and act on oral and written communication.
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
Module Descriptor: This module covers the knowledge, skills and attitudes
required in a group environment. It deals developing effective workplace
relationship.
TESDA-SOP-CO-01-F07
TESDA-SOP-CO-01-07
UNIT OF COMPETENCY: DEMONSTRATE WORK VALUES
MODULE DESCRIPTOR : This module covers the knowledge, skills and attitudes
required to demonstrate work values.
TESDA-SOP-CO-01-07
TESDA-SOP-CO-01-F07
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
TESDA-SOP-CO-01-F07
L05 Perform works spontaneously
TESDA-SOP-CO-01-F07
materials as
per company
standards
TESDA-SOP-CO-01-F07
tool and
materials
TESDA-SOP-CO-01-F07
TESDA-SOP-CO-01-F07
ASSESSTMENT CRITERION:
TESDA-SOP-CO-01-07
Trade Mathematics
Unit conversion
Ratio and
proportion
Area
TESDA-SOP-CO-01-07
MODULE DESCRIPTION: This unit covers the knowledge, skills and attitudes on
checking condition, performing preventive maintenance and storing of tools
and equipment based on the required performance standard.
plumbing defects
equipment
Operational
conditions of tools
and equipment
Plumbing tools and
equipment defects
TESDA-SOP-CO-01-07
Handouts/Instr
uctional
Materials
Handouts/Instr
uctional
Materials
Inspection form
TESDA-SOP-CO-01-07
MODULES OF INSTRUCTION
CORE COMPETENCIES
PLUMBING NC I
MODULE DESCRIPTOR: This module covers the knowledge, skills and attitudes
in the preparation of pipes, tools and equipment prior to installation except
copper pipe.
NOMINAL DURATION : 30 hours
TESDA-SOP-CO-01 F-07
Governing
Occupational
Safety and health
in the construction
industry
TESDA-SOP-CO-01-F07
measurement
s
Read
plumbing
plans and
drawing:
TESDA-SOP-CO-01-F07
MODULE DESCRIPTOR: This unit covers the knowledge .skills and attitudes in
the installation/ assembling of a single plumbing unit
PREREQUISITE
Workshop
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F07
TESDA-SOP-CO-01-F07
LIST OF EQUIPMENT
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: ______________
______________
Institution Representative Institution Head PO Focal Expert
LIST OF EQUIPMENT
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training
Tenorio Street
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: ________________ _______________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO-01-F11
LIST OF TOOLS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Old Public Market Building
Tenorio Street Labo Camarines Norte
Quantity Quantity on
Name of Tools Specification Difference Inspectors Remarks
Required Site
(1) (2) (5) (6)
(3) (4)
Pipe wrench 101214 makita 1 each size
Pleasure gauge size o-300psi 2 unit
Pick Mattock hayoma 6 pcs
Steel Tape 5mm 6 pcs
Hacksaw with 6 pcs
blade
Spirit level bar 4pcs
Reamer (pipe) 3 pcs
Submitted by: FLORIDA R. QUILAS Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
Note: Columns 1-3 to be filled out by Institution; Columns 5-6 to be filled out by PO/Expert
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
TESDA-SOP-CO-01-F11
LIST OF TOOLS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Old Public Market Building
Tenorio Street Labo Camarines Norte
Quantity Quantity on
Name of Tools Specification Difference Inspectors Remarks
Required Site
(1) (2) (5) (6)
(3) (4)
Cement trowel 101214 4 u nits
makita
Cold chisel 812 dia 5/8 6 pcs
Wheelbarrow Steel 2 units
Showel Steel 6 units
Ballpen hammer 1/ dia 6 pcs
Painth brush 1 6 pcs
Pipe cutter 1 -1 3 pcs
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Date: Date:
Date:
Note: Columns 1-3 to be filled out by Institution; Columns 5-6 to be filled out by PO/Exper
TESDA-SOP-CO-01-F11
LIST OF TOOLS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Steet
Old Public Market Building
Tenorio Street Labo Camarines Norte
Quantity Quantity on
Name of Tools Specification Difference Inspectors Remarks
Required Site
(1) (2) (5) (6)
(3) (4)
Adjustable 8 % 10 2 pcs
wrench
Mechanical Plier 2 pcs
Pipe vise 1 unit
Plastic drum 200 liters
Pail plastic G.I 3 gals 2 pcs
Plumbing Blue 6 sets
print Plan
Manual pipe 1/2 1 1 set
threaded
Basin wrench 10 5 units
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _____________
_______________
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Date: Date:
Date: TESDA-SOP-CO-01-F12
Note: Columns 1-3 to be filled out by Institution; Columns 5-6 to be filled out by PO/Expert
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Steet
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
TESDA-SOP-CO-01-F12
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
TESDA-SOP-CO-01-F12 TESDA-SOP-CO-01F12
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
TESDA-SOP-CO-01-F12
TESDA-SOP-CO-01-F12
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
TESDA-SOP-CO-01-F12
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
PVC 4 X 90 50 pcs
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
TESDA-SOP-CO-01-F12
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
TESDA-SOP-CO-01-F12
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Tenorio Street
Old Public Market Building
Labo Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
_______________
Institution Representative Institution Head PO Focal Expert
Date:
Date: Date:
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert TESDA-SOP-CO-01-F12
LIST OF CONSUMABLES/MATERIALS
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________ _______________
Institution Representative Institution Head PO Focal Expert
Date: Date:
Date:
Note: Columns 1-3 to be filled out by Institution; Columns 4- 6 to be filled out by PO/Expert
TESDA-SOP-CO-01-F13
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training
CBC
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _______________
________________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO-01-F13
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training
CBLM 10
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _______________ ________________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO-01-F14
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Uratex plastic 25
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Chairs
2x4 1
White Board
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _________________
________________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO- 01-F15
Program: Plumbing NC I
Name of Institution: Labo Community Skills Training Center
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: ________________
_______________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO-01-F16
LIST OF OFFICIALS
Program: Plumbing NC I
Name of Institution: Labo community Skills Training Center
Email Address)
Florida R. Quilas Center Administrator PESO Office Old Public Designate College Graduate
Market Building Labo
Camarines Norte
Ronaldo M. Mago Acting Registrar LCSTC Old Public Designate College Graduate
Market Building Labo
Camarines Norte
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: __________________
_______________
Institution Representative Institution Head PO Focal Expert
TESDA-SOP-CO-01-F17
LIST OF TRAINERS
Program: Plumbing NC I
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: _______________ _____________
Institution Representative Institution Head PO Focal Expert
Section 12 of the AOGLS item No. 5 A new CTPR is no longer necessary in case there is a change in the name of the designated trainer(s). The institution shall only submit the following
documents: a. Letter informing TESDA of the change of name of the trainer(s); b. Copy of the National Trainers Training Certificate (NTTC) Level I or II of the new trainer(s) for WTR programs; c.
For NTR programs, Copy of the Training Certificate on Trainer Methodology (TM I) or other training methodology certificates; and evidence of specialization of the trainer of the program ; and d.
Certified true copy of notarized contract of employmen
LIST OF NON-TEACHING STAFF
Program: Plumbing NC I
Document No.
PROCEDURES MANUAL ON UTPRAS
Unified TVET Program Registration Rev. No. Page
and Accreditation System 3
Issued by Date
Program Registration
CO
Submitted by: RONALDO M. MAGO Attested by: FLORIDA R. QUILAS Inspected by: ________________
____________
Institution Representative Institution Head PO Focal Expert