Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Equilibrio lquido-vapor.
The objective of this exercise is to determine the enthalpy of vaporization of water and perform
Executed 26March 2014
Feature9 April 2014
verification equation Claussius - Clapeyron that relates the temperature and vapor pressure of a
liquid with the heat of vaporization , for this practice is started to measure the diameter of the test
tube and determine the volume of this , weighing the empty and then water-filled tube could find
the volume and the density of the fluid was , after finding the volume , it must fill to the 4/5
Keywords: inverted and placed in a beaker filled with water so as to be completely immersed in it vertical .
Pressure The first part of the experiment was to add ice to the vessel and lowering the temperature to 5 C ,
Temperature at this time the extent of the height of the water column in the pipe is made, the second part
Enthalpy consisted in heating the vessel to the 90 C and stop the heating , this temperature is reached the
Vaporization
height of the column every time decreased 5 C until it reached 55 C , with experimental data
the enthalpy of vaporization was to be measured is that in this case was 117.70 kJ , with a relative
error of 189 % compared with the theoretical value ; This experimental result of the enthalpy is
affected by different factors preventing the values are equal or similar to the theoretical .
1. Introduccin
Donde
representa la entalpa molar de vaporizacin para el
lquido-vapor y aplicando las propiedades de los logaritmos y
La ecuacin de Claussius-Clapeyron relaciona la dependencia de reordenando la ecuacin, tenemos una nueva relacin que tiene
la temperatura y la presin de vapor de un lquido con el calor de una forma similar a la de una recta.
vaporizacin. Esta ecuacin es aplicada a los equilibrios lquido-
(3)
vapor y slido-vapor. Suponiendo que el vapor se comporta 1
= ( )+
como un gas perfecto, se puede escribir como:
1
A partir de esta ecuacin y aplicndola para un cambio de fase de En donde = + ( ). A partir de la ecuacin 3 se puede
un Gas Ideal, es posible deducir la ecuacin que se presenta a despejar la entalpa tomando la pendiente de la recta que se halla
continuacin, la cual ser muy til para determinar la entalpa de 1
al linealizar la grfica .
vaporizacin.[1]
2. Resultados y discusin
SISTEMA DE UN COMPONENTE EQUILIBRIO LQUIDO - VAPOR
VT (cm3) r (cm) naire(mol) A partir de los datos obtenidos de P vapor, se realiza una grfica de
Ln(Pvapor) vs 1/T.
15.3 1.1 6.69*10-4
Tabla 2. Datos obtenidos con las ecuaciones 1, 2 y el radio
determinado inicialmente.
0,0028 -1,85
0,0028 -2,06 | |
=
0,0028 -2,25
100
0,0029 -2,75
0,0029 -3,26
|117.70 40.66|
0,0030 -4,50 = 100
40.66
0,0030 -5,31
0,0030 = 189.47 %
Tabla 5. Datos obtenidos de 1/T y ln(Paire/Patm) Un proceso anlogo al anterior es el que se presenta en el caso del n-
pentano, el cual presenta las siguientes presiones de vapor a ciertas
temperaturas.
0,0040 -2,590
= = (14157 )(8.314 3 )
0,0036 -1,119
= 117,70 0,0032 0,027
El error relativo con respecto al valor terico de la entalpia entre Tabla 7. Datos de 1/T y Ln P del n-pentano
estos valores de presin y temperatura se determina con la
siguiente formula:
SISTEMA DE UN COMPONENTE EQUILIBRIO LQUIDO - VAPOR
Como sabemos Y= ln(P/Patm) y X= 1/T , entonces segn la La determinacin de la entalpa de vaporizacin de un compuesto
ecuacion 3tenemos que: por medio de la ecuacin de Claussius-Clapeyron tiene mayor
K=10,223 precisin cuando se dispone de la ecuacin de estado del compuesto
y del aire.
= 3158,2 = 3158,2
A mayor T y menor P el comportamiento de las sustancias se
= 26,25 moldea ms fcil al ideal, obteniendo mayor precisin en los datos
calculados.
( ( 1))(1 2 )
2
=
(1 2 )
Ecuacin 10. Expresin modelada para el clculo de .