Documentos de Académico
Documentos de Profesional
Documentos de Cultura
I. INTRODUCTION
Theory of operation: Here the basic idea is to describe
how your device works. Here you should describe how and
why the function generator works, including the 555 timer, the
circuit built around it, and the DC power supply. Include any
equations and formulae you developed or borrowed (mention
where they came from) that can be used to determine the Fig. 1 : Title
characteristics of the system.
II. METHODOLOGY
Design procedure: The goal of this part is to convey what IV. DISCUSSION
you did in this project. A description of the total design Compare and analyze data sets from theoretical calculations,
process. Here you want to describe each part of the plan, each simulation, and experimental testing. If the design did not
lab you did, with a few sentences in a short paragraph. Talk meet the specs for each frequency range, explain why and
about what you did in PSpice/Multisim - how you simulated discuss whether the margin of error is acceptable. Describe
the design - in one paragraph. In the next paragraph your conclusions about why it did or did not perform as
summarize the prototyping and testing process[1]. expected, what went well, and what you would do differently
V. CONCLUSIONS
III. RESULT A short, logical summing up of the theme(s) developed in
The purpose of this part is to evaluate your implementation the main text. Refer to the objectives.
of the project. In this section you should detail the
REFERENCES
performance of the device from theoretical calculations,
simulation, and experimental testing. Put all the data in Details of published sources of material referred to or
table/graph etc[2]. quoted in the text (including any lecture notes and URL
addresses of any websites used, any further material which is
Captions with table numbers must be placed before their essential for full understanding of your report such as
associated tables, as shown in Table 1. specification sheet)