Documentos de Académico
Documentos de Profesional
Documentos de Cultura
2004.10
Ver. 1.0
1050/1050P fusing unit replacement instructions
(1) Purpose
To return to the normal operation as soon as possible when a decrease in the fusibility is found due to the
deterioration of the fusing unit.
Sub
power
switch
1050fs5012z
Caution:
When conducting the replacement opera-
tions, be sure to turn OFF the main power
switch and the sub power switch and then
unplug the power cord from the wall outlet.
Since the fusing unit is very hot immediately
after each of the power switches is turned
OFF, you may get burnt. Be sure to conduct
1050fs2001y the operation after the fusing unit cools down
sufficiently.
1
1050/1050P fusing unit replacement instructions
Fusing
cover
2
1050/1050P fusing unit replacement instructions
Fusing
paper
exit
section
3
1050/1050P fusing unit replacement instructions
NOTE
The position to which the fusing unit is set is
provided with a guide pin. Be sure to set the
guide pin to the concave portion at the bot-
tom of the fusing unit.
NOTE
Be sure to slide the fusing unit until it hits
against the rear.
Fusing
cover
4
1050/1050P fusing unit replacement instructions
NOTE
When the ADU is brought back to its original
position, be sure to lock the pull-out lever.
1050fs2001x
Sub
power
switch
1050fs5012z
5
1050/1050P fusing unit replacement instructions
Blank page