Car alarm system
BCS010BUTTON FUNCTION
a) wf | Kk |o@
Arm_|_pisarm | silent_|_ Start
FUNCTION
Arm
1} Press the button @ on the transmitter once for2 seconds, the
siren would beep once, the flash ight would gleam ance, the
Central door locking sysiem would lock up automatically. he
engine will be cutoff thon the LED incicatar wil gleam,3 seconds
Tater, the system will enter into arm status automatically
2) In atm mode, the doar is unelosed wel, the siren will chirp 3
times to remind the car owner to close the door wel
83) Press the button @ on the transmitter once mare than 2 seconds,
the system will enter ito alarming status, the siren will chirp
the flash light will gleam,60 seconds later the system wil return
to preset status. Also in the alarming mode, press any Dutton
can stop this status
4)In arm status, press the button f@ on the transmitter once, the
siren will enirp long once, the lash light will gleam once to find
the car,
5) Inarm status, ifthe caris hit lightly or Bumped heavily, or the
car tires is unload strongly,the system will chirp for 30 seconds,
then stl keep in arm status; ifthe ear door,trunk,hood or ACC
's triggered, the systam will chirp for 2 minutes.
2. Disarm
Press the button aon the transmitter once, the siren wil chirp
twice, the flash light will gleam twice. the central door lacking
system willunlock {In silent armmade,the siren will keep in silent.)
3. Trigger Identification function
In.arm,ifthe system is triggered, there are different ways to alarm:
1)iftriggered by disarmnarmally, the siren will chirp twice, the
flashlight willgieam twice,
2) I triggered by shock sensor sensing, the siren will chirp three
times, the flash ight wil gleam three times.
3) If tiggered by door opened or engine started, the siren wi
(4)‘iter disarm(the LED indicator will gleam fastly for 20 seconds),
It nabady open the car daor or the trunk within 20 second:
system willbe in arm status with the doarlocking automatically
5. Silent Arm
1} Press the button ({K on the transmitter once for 2 seconds,the
flash light wil gleam once, the siren doesn't chirp, the central
door locking system will lock up automaticaly, the engine will
bbe cut off. Then the LED indicator wil gleam, 3 seconds later,
the system will enter into silent arm status,
2) Insilent arm mode, ithe ear by nt lightly or bumped heavily
‘or the car tires by unload strangly.or the engine by started,the
flash light will gleam for 30 seconds, then tne system is still In
arm mode; ifthe car door, hood or trunk by opened, the siren
will chirp for 2 minutes,
2) In silent arm mode,press the buttong{(on the transmitter once,
the flashlight will be on for 2 seconds,so that the car owner to,
{ind the cae, while the siren can not ehitp.
6. Remote trunk release
1) When disarm,press the buttongon the transmitter once more
than 2 seconds, the trunk will be opened, then the central door
locking system will lock
2) In arm status,press the buttonaijon the transmitter once more
than 2 seconds, the systom willbe disarmed firstly, then th
trunk will Be opened, then the central door locking system wi
De sll locked,
7. Emergency disarm
Inarm mode, i the remote is lost or strong damaged, or out of
‘work, the car owner can open the door by carkey, then turn the
car key from ACC OFF to ON,and from ACC ON to OFF for S times
towisarm
8. Auto-arm option
A.When ACC ON, press the button @ and af on tho transmitter
‘once more than 2 seconds, the siren will chirp once, which meane
the Aulo-arm function is ON.Repeat the above operation, (ne
siren wil chip twice, which means the Auto-arm function is OFF,
(2)B.In Auto-arm funetion,when parking, turn ACC OFF,and closed
the car doors.30 seconds later.the system will ener nto auto-
rm automaticaly
9. Ant-hijacking function
Turn AGC ON, then press the button @ on the transmitter once
more than 2 seconds the flash ight wil glaam, the system enter
inte antchijacking. 60 seconds Tater, the siren wil chirp, the
engine wil cut off the central door locking system wil ck Then
only press the button once to disarm
410. Central door locking system automation
‘in disarm mose somebody open the door and closed well then
utthe carkoy into the Key lock and rn to ACC ON position fr
2 eeconde, tn cental for locking system wil ick Up.
B When parking turn the car key to ACC OFF position, the central
oor tucking system wl unlocktorthe passengers off convenient.
41.Remote engine start
There ie two ways fo remote engine start.
{remote engine sar wlo detecting
‘Nbrats the button @@ on he transmit once to sta the engine,
{he siren will chip once,the flash ight wil gleam 3 times, 28
later, the engine will be started. Once he engine has been
: twill gleam 25 seconds, then the air
onaltion willbe started
B.lfthe engine is starting, press the button @/@ance wil turnoff
the engine, the system wil return tothe previous status,
tthe engine is starting the car onmer also can press the button
1 Yo oc or press the button a tounlock
D.Once the engine has been stare, the ear willbe warming-up
for8minutes then the siren wil chip for S seconds to remind
ar owner, which the system will close the engine, back tothe
previous siatus
2) remote engine start with detecting
‘erese the button B/@ion the transmitter once, the siren wil chirp
nce, ine flash ight wil gleam 3 times, he engine is started:
ifthe system's ato start the engine the system ml check up
the car condition automatialyffound everything isin common,
‘wi ine, found the ear has any
‘nalton, the system will stop starting the engine
(3)B.Once the engine has been started,the flashlight will gleam, 25
‘seconds later, the a conditioner willbe startea
C.lfthe angine is starting, pass the button @y@once will turn off
the engine, the system will return to the previous status,
D.lfthe engine is starting. the car owner also can press the button
@ to lock, orpress the button wf lo unlock.
E.Once the engine has deen started, the car will be warming-up
{for 6 minutes, then the siren will chirp for 3 seconds to remind
car owner , which the system will close the engine,back to he
previous status,
ote:
“The diesel car only can adopt the second plan,remote engint
start with detecting.
. This function will not allow to be activated if the hand brake
handle is not held on and it should be operate in neutral
position. To remind the user, the siren will sound for 2 times,
Then the system will return to the previous status.
“The system only re-start the engine for 5 times. When itis fal
to re-start the engine inthe fifth time, the siren will sound for
2 times to warn the user, that the engine startis failure.
TR.LED indicator
A.in armialarm/helpfanti-hijacking, the LED indleator will gleam
‘slow'y
B.Ifindisarm status, the system will be armed again, the LED
indicator will leam quickly
C.lnalarm automation moda, turn the carkey from ACC ON to OFF,
‘then close the door well,308 later, the LED inaicator will be on.
D.lndisarm, the LED indicator will be exlinguished.
13.Learning code
In disarm mode, put the car key into the Key lock, and turn it from
ACC OFF {0 ON for s times, the siren will chirp once, then press
‘any button on the transmitter,the siren will sound twice, one long
Chirp and one short chirp, which means the first remote transmitter
finish learning cade;press any button ance on the second remote
transmitter, the siren wil sound 3 times,one long chirp and twice
short chirp, finish the second one;press any button once on the
third remote transmitter, the siren will sound 4 times. one long
chirp and 3 times short chirp, o finished the third ane; press any
(4)button once on the forth remote transmitter, the siren will sound
5 times, one long chirp and 4 times short chirp, to finish the forth
fone. Then turn the car key from ACC ON to OFF position,the siren
thirp once, which means the system exit earning code mode. You
tan learn maximum 4 remote tranemiter,
14.Funetion option
Tre gree
Funeton | _AGCON accorr [Munaiivinaie
Tralarnmose —| parade
Press the
(bresebuton [2itaumectipuss | Lock
button @once| maretnan2s) | ihe butin=are than 26
Pressthe Ingisarmisient | yy
buttons once iserm “
reso the button| Alar faneton
Press che buon) oenrase we
andabonce [ton rete 25)
Tea
Trurkratease | fi
Prossihe
Uesntetton | PA ahaee | ian heaton
bullontonee} Moreton 29)" | festive fon | ore har)
ross Rents enaine
ptnctenee a
(5)Wiring Diagram
ANTENNA
5
z
5
z
z
=
fnCentral Lock System Wiring DiagramAttention
‘When installing, please attention the brain unit antenna should
‘be keep in vertical status, and far away the other wire-harness,
do not change the antenna length, so that there is a bad effect,
‘on the remote receiving.
2.When installing, the siren will sound, then please turn car key
from ACC OFF to ON. and press any button on the transmitte
the siren will sound 4 times, which means the learning cade is
success. After finisning the adove operation, turn ACC OFF. the
car alarms can work normally,
3.Da not aip the remote contra into waler or drop iton the ground,
{as itis electronic components insice
4.tshould be changed now battery in time, ifthe remote control
‘becomes closer or the LED indicator on the remate transmitter
becomes dim
5.This security system is consist of sophisticated electronic
‘components,so in order to avoid any accident occurred. excoy
‘changing the battery, please do not disassemble or refit any,
part by yourself.tis recommended a skilful technician to instal,
The brain installation:
‘The brain unit is usual under the instrument panel or
Lin the rant of the
find what the brain will connect to,such as ACC. flash light,pow
‘ote. The wire connection shauld be make perfect, If same wire
eed ta be cut to connect, so please adopt a heat-resistant and
insulation ribbon to bind up the wire connector for safety. After
allwires connected, connect the sockets by sequence 12P, 3P,
5P,2P. Before re-assemble the dacoralion panel step by step,
please check and test the function as per the manuals.
Shock sensor installation & test
‘After the brain installation finished, fix te shock sensor in the
‘ar, which installation place shouldbe near the car body or
insirument panel as tightly as possible, to ensure the sensor
sensitivity.
2.Adjust the sensitivity by the carsize and your need. There isa
knob on the shock sensor by which you can adjust he sensitivity,
turmto right, make the sensitivity higher. turn tothe left make ower
(9)3.The sensitivity was set by our factory before off work,it is
Suggested that not necessary, do not change I.
Trouble shootings:
‘Remote control can’t work
A.Whether the battery powers weaken 77 ILis suggested the
battery changed annually
B.Whether the remote control watered or not
Whether the remote control broken or not
Dicheck the other matching remote control worked or not
Fill the pairing remotes can not Wark,please check the wire
connection correct ornat
2.When the ear parked on the roadside in arm status,if there
is aheavy truck passed,or in the rainy weather,the system
would be alarm.
‘A.Whather the shock sensor sensitivity is too high
B’Make the sensitivity lower
3.When in arm,the siren would sound within 10, after disarm,
‘setting arm again, the siren as the same.
A.Check the wire connection correct or nat, especially the brake
Tight and illumination ight wir
B.Check the car doors closed well ornot
Cheek the shock sensar normal or nat
4.The siren did not sound when the alarm was triggered
A .Ghock the security system sin silent arm mode
BCheck the sirenis damages
Check the wire connection between main unit and siren correct
format
5.The central lock system can not act normally, even no any
‘action
‘A.Cheek the actuators and motor work or not
B-Check the door switch works normally or nat
CCheck the wire connection and fuse Ifthe fuse broken, there
‘must be in installation problem, please check the wire
Connection again,
D.Piease read the central lock system installation instruction
‘and diagram again
(10)6.After the brain fixed in the car, the siren sound can net stop
‘and close by the remote
‘A.Cheek the socket connection carract or not.
B Check the wire connection corrector not
.Check the switch positions correct or not
DiCheck the fuse broken or not
F. Cheek tne codes betwaen the remote and the brain unit matched
feach other or nat
G.ityou have a spare battery siren, please ry and check the switch
pasition corrector no
Car Alarm Electronic Specification:
Gar alacm brain
‘Working voltage: 12V:-2V
Stalic current: 13mA.
Shock sensor current: <1mA,
‘Output current: Flash lights: 6A 4
Siren: 104
Central lock system: 108
Working Frequency: 305MHz-450MHz
B Transmitter
‘Working voltage: 12v
Stalie current: OmA
Battery. 12V
Working Frequency: 305MH2-450MHz
(44)Warrantee Card
Vehicle No
Producto
ProductDate:
PurchasedDate
Remark
Confirmed and seal by dealer
Cd
41.The quality of this product was strongly controlled
before out of factory, which ensures its advanced
performance under normal utilization. To protect
‘consumers right and keep our company reputation,
We guarantee that if any failure happened due to
production and bad quality of the component, it
will repair free of charge with one year from the
date when you buy this produc
2.The following are not includes
‘a.The natural loss of the battery
b.Any human damage,such as disassemble and
refit the products by yourself,or the product caused
by misuse.
the warranty
S