Documentos de Académico
Documentos de Profesional
Documentos de Cultura
MILLIVOLT OUTPUT MODELS 420 & 422 CURRENT OUTPUT MODEL 425
Excitation: 10 VDC (Nominal) Excitation: 12 to 30 VDC
Output: 0 to 30 mV (420) Output: 4 to 20 mA
0 to 100 mV (422) Zero Output: 4 mA, 2.0% of FSO @ 75F
Zero Output: 0 mV 2 mV Full Scale Output: 20 mA, 1.0% @ 75F
Full Scale Output: 30 mV 1 mV (420) Protection: Reverse polarity protected
(3 mV/V Ratiometric with Excitation Voltage) Loop Resistance: See loop resistance chart on back page
100 mV 1 mV (422)
Temperature Range: Compensated: 0 o to +160 oF (-18o to 71 oC)
(10 mV/V Ratiometric with Excitation Voltage) Operating: -40o to 185oF (-40 o to 85 oC)
Resistance: 5000 ohms (nominal) Temperature Error: 1.0% of FSO max over compensated range
o o o o
Temperature Range: Compensated: +30 to +160 F (-1 to 71 C)
o o o o Weight: 5.9 oz (167.5 grams)
Operating: -40 to 185 F (-40 to 85 C) standard
Wiring: Red (+Excite) Bendix Pin A/Pin 1
Temperature Error: 3.0% of FSO max over compensated range (420)
Black (-Excite) Bendix Pin B/Pin 2
1.0% of FSO max over compensated range (422) Drain (Case Gnd)Bendix Pin D/Pin 4
Weight: 4.6 oz (131 grams)
Wiring: Red (+Excite) Bendix Pin A/Pin 1 CALIBRATION
Green (+Output) Bendix Pin B/Pin 3 All models are tested to meet or exceed the published specifications. The
calibration and testing were done using instrumentation and standards
White (-Output) Bendix Pin C/Pin 2 traceable to the National Institute of Standards and Technology (NIST).
Black (-Excite) Bendix Pin D/Pin 4 Also tested in accordance with MIL-STD-45662A.
BARKSDALE, INC., 3211 Fruitland Avenue, Los Angeles, CA 90058-0843 (323) 589-6181 Bulletin No. 27232-D 5-19-05
DIMENSIONS WIRING ELECTRICAL CONNECTIONS
MILLIVOLT OUTPUT MILLIVOLT OUTPUT
1/4 NPT PRESSURE PORT
RED (+EXC)
+ + GRN (+OUT)
420, 422
TRANSDUCER
POWER - - WHT (-OUT)
SUPPLY METER Shielded Jacketed Cable Standard
BLK (-EXC)
4 15/32 114.3
1 1/2 DIA.
38.1
7/8 HEX ADDITIONAL OPTIONS
(420, 422, 423, 425, 426 MODELS)
PRESSURE RANGES 2000 TO 7500 PSI VOLTAGE OUTPUT
POWER
1/4 NPT PRESSURE PORT SUPPLY
RED (+EXC)
- +
423, 426
BLK Bendix Connector
TRANSDUCER
- (COMMON) NEMA 3
1 DIA. 3 3/8 85.7 4 Pin (PT02A-8-4P)
METER
25.4 + To order: replace H3 in catalog number with T2
1" HEX WHT (+OUT)
CASE Mating Connector (not provided)
PRESSURE RANGES 15 TO 1000 PSI GROUND T2: Bendix PT06E-8-4S(SR)
MINIMUM
RESISTANCE .750 DIA.
1000
19.1
750
OPERATING
500 BAND
250
* 0 7/16-20 UNF INTERNAL PORT
11 15 20 25 30 35 To order: add -P1 suffix to
T4 ELECTRICAL CONNECTOR
EXCITATION VOLTAGE (volts DC) catalog number
BEFORE RETURNING ANY PRODUCT(S) TO BARKSDALE, YOU MUST OBTAIN A FOR NON-WARRANTY REPAIRS OR CALIBRATION, consult Barksdale for current
RETURNED MERCHANDISE AUTHORIZATION FROM OUR CUSTOMER SERVICE repair/calibration charges. Have the following information available BEFORE contacting
DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). Barksdale:
1. Your P.O. number to cover the COST of the repair/calibration.
FOR WARRANTY RETURNS, please have the following information available 2. Model number of product.
BEFORE contacting Barksdale: 3. Repair instructions and/or specific problems you are having with the product.
1. P.O. number under which the product was PURCHASED.
2. Model number of the product under warranty. Copyright 1993 Barksdale, Inc.