Está en la página 1de 3

as: 22980sec

Using keyboard-interactive authentication.


Password:
RO.TIGO.05#sh run
Building configuration...

Current configuration : 1552 bytes


!
! Last configuration change at 00:01:51 UTC Fri Jun 23 2017 by 22980sec
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RO.TIGO.05
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$qv8B$Ev6UjTj5vd9KYWP5sS3Ym.
!
no aaa new-model
!
dot11 syslog
ip source-route
!
!
ip cef
!
!
!
ip domain name MIH.com
multilink bundle-name authenticated
!
!
crypto pki token default removal timeout 0
!
!
!
!
license udi pid CISCO2821 sn FGL15511308
username 22980sec privilege 15 secret 5 $1$hax3$sXxOwt3A/wYj31qlw1dV20
username asosa privilege 15 secret 5 $1$RpIB$HZNZJdgGoBNQw/WFZNlEg.
!
!
ip ssh version 2
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.69.1 255.255.255.252
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 191.103.72.242 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
!
interface Serial0/0/0
no ip address
shutdown
no fair-queue
!
ip default-gateway 191.103.72.241
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat pool no-overload 191.103.72.245 191.103.72.245 prefix-length 28
ip nat inside source list 100 pool no-overload overload
ip route 0.0.0.0 0.0.0.0 191.103.72.241
ip route 192.168.0.0 255.255.0.0 192.168.69.2
!
access-list 100 permit ip 192.168.0.0 0.0.255.255 any
!
!
control-plane
!
!
!
line con 0
login local
line aux 0
line vty 0 4
login local
transport input ssh
!
scheduler allocate 20000 1000
end

RO.TIGO.05#
RO.TIGO.05#config
RO.TIGO.05#configure termi
RO.TIGO.05#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
RO.TIGO.05(config)#int
RO.TIGO.05(config)#interface g0/1
RO.TIGO.05(config-if)#shu
RO.TIGO.05(config-if)#shutdown
RO.TIGO.05(config-if)#exit
RO.TIGO.05(config)#exit
RO.TIGO.05#cle
RO.TIGO.05#clear ip nat
RO.TIGO.05#clear ip nat tr
RO.TIGO.05#clear ip nat translation *
RO.TIGO.05#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RO.TIGO.05(config)#$ad 191.103.72.245 191.103.72.245 prefix-length 28
RO.TIGO.05(config)#no ip nat pool no-overload 191.103.72.245 191.103.72.245 pr$
RO.TIGO.05(config)#$rload 191.103.72.246 191.103.72.246 prefix-length 28
%Pool no-overload not found
RO.TIGO.05(config)#ip nat pool no-overload 191.103.72.246 191.103.72.246 prefi$
RO.TIGO.05(config)#exit
RO.TIGO.05#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RO.TIGO.05(config)#int g0/1
RO.TIGO.05(config-if)#no sh
RO.TIGO.05(config-if)#no shutdown
RO.TIGO.05(config-if)#

También podría gustarte