Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1
Meeting / Event
VR Series Jumbo
The VR SERIES
VR-II one boom jumbo
All of our hydraulic rigs are designed to drill vertical, horizontal and angled holes.
The right Jumbo is dependent upon a combination of factors for your particular
situation:
Simplicity
Safety
Production targets
Operator requirements
Aftermarket support
Reduce maintenance
2
Meeting / Event
Description
Direct or pilot control suited for
Canopy Standard operator comfort Feed assembly:
Enclosed cab - multiple length
ROPS/FOPS - wearable components
- adapted to handle the
Diesel tram smallest to largest
and drifters
electric drill
Safety Features
ROPS/FOPS canopies and cabs
Certified protection of the operators
Cabs are pressurize, insolated and isolated
Spring applied brakes
Fail safe system activated on low hydraulic oil pressure or electrical failure
Three point mounting and anti-slip foot steps
Design out slips and falls
Hot component isolation
Prevents fires from oil spray
Prevents inadvertent contact
Interlocks and safety systems
Protects people and jumbo
Ground level maintenance
No climbing
Meeting / Event
Reliability Features
Rugged steel frame structures
Built strong for long life
Montabert drifter
High performance / low maintenance
Centralized lubrication
To grease all moving points
Ease of maintenance
Ensures a long lifetime
Meeting / Event
6
Meeting / Event
Face coverage
Joy A/C Sandvik Resemin
VR-II T1D DD211 Troiden 44
Height 5.4m 4.9m 5.8m 4.9m
VR-II Comparison
VR-II T1D DD211 Troiden 44
Standard Feed MTF-12 BMH2837 (3.7m steel) CF300-12 RE-2500 series (2.4M rods)
Weight (Kg): 10.955 11,000 13,000 10,500
Inner radius (mm): 3057 2750mm 4250mm 2500mm
Outer radius (mm): 5080 4400mm 5850mm 4640mm
Articulation 40deg 40deg 34deg 40deg
Ground clearance (mm): 317 296 250
Feed (max length): Up to 18ft up to 16ft up to 16ft up to 14ft
Hc50 - 13KW
Hc109 - 18KW
HC95 - 22Kw 1638 / 1838 / 2238 RD314- 14Kw
Rock drill: HC110 - 33kw 16Kw / 18Kw / 22 Kw XL5 - 20Kw HC95 - 22Kw
Engine Diesel (kW): 72 55 55 72
Dana 113 axles with enclosed wet disc brakes. SAHR system .
10
Meeting / Event
12
Meeting / Event
Bonfiglioli Helac
Planetary Gear Motor with external hydraulic motor for rotation Rotary Actuator
13
Meeting / Event
- Improved stronger design for Expander System solutions in pivots to offer custom made solutions even
if the wear dimensions are beyond the size of a traditional pivot pin.
14
Meeting / Event
Drilling Control
Automatic collaring
Anti-jamming
Automatic reduction of percussion in bad ground conditions
Automatic water monitoring with feed return should low
volume or pressure be encountered
Auto return to start position following hole completion
Control levers for operating percussion, rotation, bit removal
and feed
15
Meeting / Event
16
Meeting / Event
Montabert Drifters
HC-95
Lower noise levels and less vibration enhance operator environment
Increased tool life (striking bar, bits and coupler) decrease your cost (
Stronger rotation systems for better reliability
HC-110
Maintenance free accumulators
Reduction in vibration (less wear on drifter body sections and pins,
bushings, boom)
Lowest maintenance drifter on market (Rebuilds from 800 to 1000hrs)
17
Meeting / Event
Screw Compressor
Screw compressor are maintenance free, less troublesome and the most reliable compressor due
to:
The duty cycle of our rotary screw compressors allows the compressor to run up to 100% of
the time. There is no need to over-size your compressor to allow for cool down.
Screw compressors operating temperature are lower than piston style compressors . This
means screw compressor will have a longer life.
There are no pistons or rings to wear out. Screw compressors are maintenance free other
than your normal filter changes
More efficient pressure and consistent pressure output. This means the screw compressor
does not have to operate as hard as a piston compressor.
Screw compressors have less equipment maintenance and far longer component life than
with piston units.
Screw compressors offer more air per horsepower, reducing energy requirements.
Screw compressors are designed simple. Only require filter and oil changes on planned preventative maintenance
scheduled.
Screw compressors are quieter than piston units, more flexibility in installation and
are a maintenance free components.
Meeting / Event
Overall Dimensions
Meeting / Event
Available Options
21
Meeting / Event