Documentos de Académico
Documentos de Profesional
Documentos de Cultura
control Valves
G1/8 & G1/4 Spool valves
Available in 3/2 or 5/2 versions, all valves including Operation of the actuator on the 5/2 valve opens the
double pilot and double solenoid types may be cylinder port nearest to the actuator. On the 3/2 version
mounted in any position, The balanced spool design the inlet is piped to the port furthest away from the
ensures that operating forces remain unaffected by actuator for normally closed operation, and to the port
variations in inlet pressure. nearest the actuator for normally open. Any of the
actuators may be fitted with spring or pilot return
The body is a zinc alloy die-casting with stainless steel mechanism. Valves may also be supplied with the
spool, sealed by viton rubber 'O' rings. All operating same actuator at both ends; e.g. double roller. Roller
parts exposed to the working fluid are of non-corrosive versions are designed to give a common height on
material and all ports are threaded G1/8 B.S.P. parallel. both 3/2 and 5/2 valves to ensure uniformity and
The block design of the body with its three mounting efficiency in a multi-valve assembly.
holes is ideally suited to close banking and all valves
may be serviced without disturbing the pipework The reasonably short travel and lightweight spool
simply by unscrewing the actuator and return ensures that extremely high operating speeds are
assemblies. possible. A double pilot 5/2 valve has been tested at
over 3000 cycles per minute, but for practical purposes
The 3/2 valve can be piped normally open or closed the operating speed of the valve is determined by
simply by changing the air inlet from the normal inlet cylinder stroke and bore size.
port to the exhaust port, and the 5/2 valve can be
piped in different variations to suit the application
required. Midget spool valves can also be used as
impulse type valves, when the signal is required at the
end of the cylinder stroke or when the tripping cylinder
or machine cam is too small to clear the mechanical
trip of the valve.
Features
Zinc diecast
seal spacers
Integral mounting
holes
Stainless steel
spool
Plastic bush
Nitrile pilot
piston seals
Directional control valves G1/8 3/2 - 5/2
Basic body dimensions (mm)
3/2 body
7,5
33
32
Standard spring
return housing
48
Solenoid pilot
23
16
8
Air pilot
16
Mechanical
13,5 16
Plunger
Whisker 6,5 5,5
Roller
One way trip
One way roller trip
5/2 body
61
48
33
27
G1/8
15
Air pilot
15
32
16
housing
Facia actuators
22mm
16
!
Directional control valves G1/8 3/2 - 5/2
Solenoid pilot operated - spring return Symbol
2 4 2
10
12 14 12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (solenoid)
Spring housing Plastic
Ordering information
Part nos. Type Actuator Return Symbol
"
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
16
33
16
4,8
8 8
130
G1/8
65
23
16
115
8 8
4,8
33
16
16
143
G1/8
65
23
16
100
#
Directional control valves G1/8 3/2 - 5/2
Solenoid pilot operated - pilot return Symbol
2 4 2
10
12 14 12
1 3 51 3
Materials
Body Aluminium
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (solenoid)
Ordering information
Part nos. Type Actuator Return Symbol
$
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
16
23
16
4,8
8 8
149
G1/8
G1/8
65
23
16
119
8 8
4,8
23
16
16
173
G1/8
G1/8
65
23
16
135
%
Directional control valves G1/8 3/2 - 5/2
Double solenoid pilot operated valves Symbol
2 4 2
12 10 14 12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (solenoid)
Ordering information
Part nos. Type Actuator Return Symbol
&
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
16
23
16
4,8
8 8
204
G1/8
65
137
8 8
4,8
33
16
16
219
G1/8
65
152
'
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Type Solenoid Actuators
Catalogue: 2120GB, 2131GB, 2135GB, 2123GB
Date of Issue: February 2000
Bulletin No: IBL 10064
Due to technical difficulties with supply of the 150 Type Low Profile Solenoids it
has become necessary to make them obsolete with immediate effect.
This change will affect the following valve ranges: -
ISO Size 1 ISO Size 2
Midget G1/8 Spool Valves Intermediate G1/4 Spool valves
Direct Acting Solenoid Valves
It is planned to change all production on ISO Size 1 and ISO Size 2 immediately and
to use the remaining stocks of 150s for the other ranges and progressively introduce
the change during the next few months.
Template.doc Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Type Solenoid Actuators
Catalogue: 2120GB, 2131GB, 2135GB, 2123GB
Date of Issue: February 2000
Bulletin No: IBL 10064
Template.doc Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
The Midget Series spool valves and solenoid Gang Manifolds will change to the new solenoid over
the next couple of months as stocks of 150 series solenoids are used.
The following valves will be effected by the change
LB43313* 33202*
LB43313M* 33202M*
LB43314* 33203*
LB43314M* 33203M*
LB43323* 33204*
LB43323M* 33204M*
LB43324* 33205*
LB43324M* 33205M*
LB43333* 33206*
LB43333M* 33206M*
LB43334* 33207*
LB43334M* 33207M*
33208*
33208M*
33209*
33209M*
33210*
33210M*
Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
The single stand-alone 3/2 direct acting Midget Solenoid Valve, 154*, will be replaced by a new valve
st
on the 1 August 2000, Part Number, 254*
Since the initial introduction of the 150 series solenoids, suffix letters have been used at the end of
the Part Number to denote the required voltage range. The voltage ranges on the new 250 series
can in some cases replace two or more of the previously used ranges, see comparison chart shown
below.
Replacement Solenoids
Page 3
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
We will continue to supply replacement solenoid assemblies, 150C* and 150CM*, until stocks are
exhausted, however, it will be possible to convert valves fitted with these assemblies to the new type
solenoid by use of a conversion kit.
The 250 series solenoid uses a slipover coil, therefore once converted, the coil only will be available
as a replacement kit.
250C* 250R*
Page 4
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
Since the initial introduction of the 3035 series solenoids, suffix letters have been used at the end of
the Part Number to denote the required voltage range. The voltage ranges on the new 350 series
can in some cases replace two or more of the previously used ranges, see comparison chart shown
below.
Replacement Solenoids
Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
The complete CNOMO solenoid assemblies can be supplied as replacements, order using the Part
Numbers shown below :
Page 3
Directional control valves G1/8 3/2 - 5/2
Air pilot operated valves Symbol
2 4 2
12 10 14 12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Spring housing Nylon
Ordering information
Part nos. Type Actuator Return Symbol
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
G1/8
16
16
12
39
G1/8
83
G1/8
102
8
4,8
32
39
19
33
G1/8
16
16
12
47
4,8
G1/8
98
16
G1/8
118
8
8
16
39
47
19
33
Directional control valves G1/8 3/2 - 5/2
Diaphragm operated valves Symbol
2 4 2
10 12
12 14
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton
Spring housing Zinc diecast
Diaphragm Nitrile
Ordering information
Part nos. Type Actuator Return Symbol
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
89 89
G1/8 20
G1/8
G1/8
G1/8
35,5
G1/8
103
103
8
8
4,8
35,5
38
19
6,5
G1/8
33
48
G1/8
20
G1/8 20
G1/8
Mounting brackets
G1/8
7 x holes
46
35
119
42,5
4,8
G1/8
16
51
8
146
8
16
42,5
77
G1/8
A A
38
19
6,5
70
33
48
G1/8
4,8
20
!
Directional control valves G1/8 3/2 - 5/2
Mechanically operated valves Symbol
2 4 2
12 10 14 12
1 3 5 1 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton
Spring housing Nylon
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
Whisker
B43003W 3/2 normally closed Spring
Whisker
B43004WO 5/2 normally open Spring
Note: All valves featured on this page are available with an To order delete 'S' for spring and add 'P'. e.g. B43003CP
air pilot return mechanism. For dimensions of air pilot housing see page 3.
"
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
16
,3
22
82
16
6 4,5
0,5
18
7
154
4
Actuated
16
Full stroke
G1/8
86
8
8
4,8
32
15 33
23
19
33
,3
22
82
16
6
4,5
0,5
7
18
4
Actuated
16
171
Full stroke
4,8
G1/8
102
16
8
8
16
39
23 33
19
33
#
Directional control valves G1/8 3/2 - 5/2
Mechanically operated valves Symbol
2 4 2
12 10 14 12
1 3 5 1 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton
Spring housing Nylon
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
One way
B43003RTS 3/2 roller trip Spring
One way
B43004RTS 5/2 roller trip Spring
Note: All valves featured on this page are available with an To order delete 'S' for spring and add 'P'. e.g. B43003CP
air pilot return mechanism. For dimensions of air pilot housing see page 3.
$
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
Roller operated One way trip One way roller trip operated
spring return spring return
4,5
6
16
16
16
9
30 29
30 27
19
24
30
30
0
0
9,5
7,5
75 max
30 27
86 max
106 max
99 max
110 max
117 max
11
G1/8
8
58
8
4,8
10
19
48
33 33
Roller operated One way trip One way roller trip operated
spring return spring return
4,5
6
16
16
16
30 29
30 27
19
24
30
30
0
0
9,5
7,5
83 max
94 max
115 max
122 max
30 27
133 max
126 max
4,8
G1/8
11
16
8
8
16
58
10
19 48
33
33
%
Directional control valves G1/8 3/2 - 5/2
Manually operated valves Symbol
2 4 2
12 10 14 12
1 3 5 1 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton
Spring housing Nylon
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
Note: All valves featured on this page are available with an To order delete 'S' for spring and add 'P'. e.g. B43003CP
air pilot return mechanism. For dimensions of air pilot housing see page 3.
&
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
27
16
16
19
,3 ,3
22 22
900
30
47
16
16
4
14,5
110
10
4
G1/8
102
4,8
8
8
8
63
8
32
32
19
33
33
19
16
,3 ,3
22 22
900
30
47
16
16
4
14,5
10
G1/8
125
4,8
117
16
8 8
78
16
39
19
33
33
'
Directional control valves G1/8 3/2 - 5/2
Manually operated valves Symbol
2 4 2
12 10 14 12
1 3 5 1 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton
Spring housing Nylon
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
Note: All valves featured on this page are available with an To order delete 'S' for spring and add 'P'. e.g. B43003CP
air pilot return mechanism. For dimensions of air pilot housing see page 3.
Directional control valves G1/8 3/2 - 5/2
3/2 valve dimensions (mm)
G1/8
25
16
57
33
73
56
30
5
7,
78
143
59
G1/8
90
8
4,8
41
16
6
19
33
25
G1/8
57
33
73
56
30
5
7,
78
67
158
105
4,8
G1/8
16
8
8
16
41
16
6
19
33
Directional
Facia actuators
control
22mm, G11//88 3/2
valves G 3/2 -- 5/2
5/2
The system 22mm 3
12,7
Valve body complete with
actuator retaining clip
22,3
16 69 mm
Mounting
Assembly is simple; the actuators fit into the holder/panel
mounting clamp with bayonet fixing. The panel mounting
screws may then be tightened up to the panel as required
and the valve body assembly clipped on. No seals or
special tools are required, interchanging actuators or valve
16 84 mm
body assemblies is equally simple.
7 mm max. panel
30
Key switch non-latching Locked position Withdrawal position Order code
Out Un-locked 33000-100KDS
In Locked 33000-100KES
24,5
Directional control valves G1/8 3/2 - 5/2
12
Key switch 'stay-put' Withdrawl position Order code
Either 33000-100KFS
12
27
30
Emergency button Colour Order code Type
41
Red 33000-100BEYS 40 Mushroom, key release
Red 33000-100BGYS 40 Mushroom latching
40
70
Red 33000-100BPYS Raised latching button
Red 33000-100BRYS 70 Mushroom latching
Black 33000-100BAXS
Red 33000-100BAYS
Green 33000-100BAZS
Black 33000-100BBXS
Red 33000-100BBYS
Black 33000-100BCXS
Red 33000-100BCYS
Green 33000-100BCZS
Red 33000-100UAYS
Green 33000-100UAZS
Black 33000-100UBXS
27
Red 33000-100UBYS
Green 33000-100UBZS
Red 33000-100BDYS
Green 33000-100BDZS
!
Directional
Control Valves
G1/4, 3/2, 5/2, 3/3 and 5/3
Spool valves
Directional control valves G1/4
3/2, 5/2, 3/3, 5/3 Spool Valves G1/4 Ports
This quality and proven range of valves feature a block Operation of the actuator on the 5/2 valve opens the
form zinc diecast body passivated to prevent corrosion cylinder port nearest to the actuator. On the 3/2 version
and designed to allow complete interchangeability of the inlet is piped to the port furthest away from the
actuators and return mechanisms. The stainless steel actuator for normally closed operation, and to the port
spool is sealed by synthetic viton 'O' rings, with unique nearest the actuator for normally open. Any of the
seal spacers to ensure full air flow through the open actuators may be fitted with spring or pilot return
ports. Non corrosive materials are used on all operating mechanism. Valves may also be supplied with the
parts exposed to the working fluid. same actuator at both ends; e.g. double roller. Roller
versions are designed to give a common height on
both 3/2 and 5/2 valves to ensure uniformity and
efficiency in a multi-valve assembly.
Individual valves may be mounted in any position, the
block form construction in particularly convenient for Centre position valves; either spring to centre or
compact banking. Valves may be serviced in-situ by 3-position (detented mid-position) are available in the
removal of the actuator, facilitating extraction of the following configurations:
spool and 'O' rings.
Neutral X - Spool in mid-position - all ports closed.
Features
Static
Viton 'O' ring
Integral mounting
holes
Optional inline
pilot port
Brass
seal spacers
Lightweight stainless
Tell tale indicator/ steel spool
manual override
Directional control valves G1/4
Basic body dimensions (mm)
3/2 body
42
41
Standard spring
42
return housing
27
11
Solenoid pilot
5/2 body
27
42
Air pilot
64
27
34
Mechanical 18
Plunger G1/8
3/3 body
G1/8
Air pilot housing
42
11
42
33
Manual
Button 41 26
Foot
27
Lever
27
5/3 body
42
64 26
27
!
Directional control valves G1/4, 3/2 - 5/2
Solenoid pilot operated Symbol
5 watt solenoid
2 4 2
10 12
12 14
3 1 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Symbol
4
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
4,8
42
32
10,5 10,5
31,5
89
27
G1/4
11 11
116
4,8
42
32
21,5 21,5
42
89
27
G1/4 22
22
137
#
Directional control valves G1/4, 3/2 - 5/2
Solenoid pilot operated Symbol
5 watt solenoid
2 4 2
10 12
12 14
3 1 5 1 3
Materials
Body Aluminium
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Ordering information
Part nos. Type Actuator Return Symbol
6
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
4,8
42
32
10,5 10,5
52
89
27
G1/4
11 11
135
4,8
42
32
21,5 21,5
64
85
27
G1/4 22 22
157
%
Directional control valves G1/4, 3/2 - 5/2
Solenoid pilot operated Symbol
5 watt solenoid
2 4 2
12 10 14 12
3 1 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Ordering information
Part nos. Type Actuator Return Symbol
8
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
170
4,8
42
32
10,5 10,5
63
89
11 11
G1/4
11 11
4,8 4,8
42
32
21,5 21,5
91
89
89
22 22
G1/4
'
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Type Solenoid Actuators
Catalogue: 2120GB, 2131GB, 2135GB, 2123GB
Date of Issue: February 2000
Bulletin No: IBL 10064
Due to technical difficulties with supply of the 150 Type Low Profile Solenoids it
has become necessary to make them obsolete with immediate effect.
This change will affect the following valve ranges: -
ISO Size 1 ISO Size 2
Midget G1/8 Spool Valves Intermediate G1/4 Spool valves
Direct Acting Solenoid Valves
It is planned to change all production on ISO Size 1 and ISO Size 2 immediately and
to use the remaining stocks of 150s for the other ranges and progressively introduce
the change during the next few months.
Template.doc Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Type Solenoid Actuators
Catalogue: 2120GB, 2131GB, 2135GB, 2123GB
Date of Issue: February 2000
Bulletin No: IBL 10064
Template.doc Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
The Midget Series spool valves and solenoid Gang Manifolds will change to the new solenoid over
the next couple of months as stocks of 150 series solenoids are used.
The following valves will be effected by the change
LB43313* 33202*
LB43313M* 33202M*
LB43314* 33203*
LB43314M* 33203M*
LB43323* 33204*
LB43323M* 33204M*
LB43324* 33205*
LB43324M* 33205M*
LB43333* 33206*
LB43333M* 33206M*
LB43334* 33207*
LB43334M* 33207M*
33208*
33208M*
33209*
33209M*
33210*
33210M*
Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
The single stand-alone 3/2 direct acting Midget Solenoid Valve, 154*, will be replaced by a new valve
st
on the 1 August 2000, Part Number, 254*
Since the initial introduction of the 150 series solenoids, suffix letters have been used at the end of
the Part Number to denote the required voltage range. The voltage ranges on the new 250 series
can in some cases replace two or more of the previously used ranges, see comparison chart shown
below.
Replacement Solenoids
Page 3
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 150 Series Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: ILB 10065
We will continue to supply replacement solenoid assemblies, 150C* and 150CM*, until stocks are
exhausted, however, it will be possible to convert valves fitted with these assemblies to the new type
solenoid by use of a conversion kit.
The 250 series solenoid uses a slipover coil, therefore once converted, the coil only will be available
as a replacement kit.
250C* 250R*
Page 4
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
Page 1
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
Since the initial introduction of the 3035 series solenoids, suffix letters have been used at the end of
the Part Number to denote the required voltage range. The voltage ranges on the new 350 series
can in some cases replace two or more of the previously used ranges, see comparison chart shown
below.
Replacement Solenoids
Page 2
Information Bulletin
Product Group: Actuators Valves Air Factory Other
Treatment Automation Products
Title: 3035 Series CNOMO Solenoids
Catalogue:
Date of Issue: June 2000
Bulletin No: IBL10066
The complete CNOMO solenoid assemblies can be supplied as replacements, order using the Part
Numbers shown below :
Page 3
Directional control valves G1/4, 3/2 - 5/2
Air pilot operated valves Symbol
2 4 2
10 12
12 14
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Symbol
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
42
32
8
8
1
1
G1/4 G1/4
10,5
10,5
85
108
4,8
4,8
31
10,5
10,5
32
42
10 10
27
27
G1/8 G1/8
32
8
8
1
G1/4 G1/4
21,5
21,5
11
11
107
130
11
11
21,5
21,5
42
4,8
4,8
32
42
10 10
27
27
G1/8 G1/8
Directional control valves G1/4, 3/2 - 5/2
Mechanically operated valves Symbol
2 4 2
10 14 12
12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
Note: All valves featured on this page are available with air
pilot return mechanisms. To order delete 'S' for spring and
add 'P' e.g. B53003CP.
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
19 19
7
7,5
7,5
0,5
0,5
12
Operated Operated
16
5 Full stroke
Full stroke
G1/4 G1/4
10,5
10,5
94
87
4,8
4,8
31
31
10,5
10,5
32 32
42 42
26
27
26
6
19 19
7
7,5
7,5
0,5
0,5
12
Operated Operated
16
21,5
21,5
116
11
11
11
11
21,5
21,5
42
4,8
42
4,8
32 32
42 42
26
27
26
6
!
Directional control valves G1/4, 3/2 - 5/2
Manually operated valves Symbol
2 4 2
10 14 12
12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
Note: All valves featured on this page are available with an To order delete 'S' for spring and add 'P'. e.g. B53003CP
air pilot return mechanism. For dimensions of air pilot housing see page
"
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
34o
27
19
42
100
16
5 G1/4
111
G1/4
10,5
27
4,8
31
10,5
82
32 31
14
42 4,8
54
32
45
42
10,5 10,5
27
26
M5
Panel mounting
Mounting plate max. 6mm
19
42
100
16
G1/4
133
G1/4
21,5
27
11 11
21,5
104
42
4,8
42
32
14 11 11
42
4,8
54
32
42
45
27
26
21,5 21,5
M5
#
Directional control valves G1/4, 3/2 - 5/2
Manually operated valves Symbol
2 4 2
10 12
12 14
1 3 5 1 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Br ass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Symbol Optional air pilot return
$
Directional control valves G1/4, 3/2 - 5/2
3/2 valve dimensions (mm)
140
G1/4 G1/4
72
62
27
27
10
10
66 66
164 164
9 9
31 31
4,8 4,8
42
32
89
42
76
38
38
76
32
89
4,8
10,5 10,5 10,5 10,5
140
G1/4
72
G1/4
62
27
10
27
10
88
88
164
186 9 42
9 11 11
42
4,8
11 11
4,8
32
38
42
76
89
38
42
32
76
89
21,5 21,5
21,5 21,5
%
Directional control valves G1/4, - 5/3
Double solenoid pilot operated Symbol
5 watt solenoid
Self centring valves
4 2
14 12
51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes B r as s
Seals Viton (valve body)
Nitrile (actuators)
Ordering information
Part nos. Type Actuator Return Mid Symbol
&
Directional control valves G1/4, - 5/3
5/3 valve dimensions (mm)
217
11 11
4,8
42
32
21,5 21,5
91
89
G1/4 22 22
'
Directional control valves G1/4, - 5/3
Solenoid pilot operated Symbol
4 and 5 watt solenoids 4 2
14 12
51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes B r as s
Seals Viton (valve body)
Nitrile (actuators)
Ordering information
Part nos. Type Coil Actuator Return Mid Symbol
*Specify voltage and add suffix letters For manual override add suffix M.
Directional control valves G1/4, - 5/3
5/3 valve dimensions (mm)
11 11
4,8
42
32
21,5 21,5
89
89
G1/4 22 22
183
Directional control valves G1/4, - 5/3
Button and air pilot operated Symbol
Self centring valves
4 2 4 2
14 12 14 12
51 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Br ass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Button colours
X = Black (standard)
Y = Red
Z = Green
Ordering information
Part nos. Type Actuator Return Mid Symbol Optional pilot return
11 11
8
4,8 G1/4
10
42
32
21,5 21,5 1
G1/8 111
156
G1/4
27
Button operated
159
68
11 11
42 16 4,8
19
27
32
42
5 21,5 21,5
G1/4
27
!
Directional control valves G1/4, 3/3 - 5/3
Lever operated Symbol
Self centring valves
2 4 2
12 10 14 12
3 1 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Mid Symbol Optional air pilot return
"
Directional control valves G1/4, 3/3 - 5/3
3/3 valve dimensions (mm)
Lever operated
34O
17O
14 57
4,8
103
G1/4
45
27
42
32
54
108 10,5 10,5
M5
Panel mounting
Mounting plate max. 6mm
Lever operated
34O
17O
68
11 11
14
103
4,8
G1/4
27
42
32
45
54
#
Directional control valves G1/4, 3/3 - 5/3
Lever operated Symbol
3 position
2 4 2
14
12 10 12
1 3 513
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Br ass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Mid Symbol Optional air pilot return
$
Directional control valves G1/4, 3/3 - 5/3
3/3 valve dimensions (mm)
Lever operated
34O
17O
14 57
4,8
103
G1/4
45
27
42
32
54
108 10,5 10,5
M5
Panel mounting
Mounting plate max. 6mm
Lever operated
34O
17O
68
11 11
14
103
4,8
G1/4
27
42
32
45
54
%
Directional control valves G1/4, 3/3 - 5/3
Manually operated valves Symbol
2 4 2
12 10 14 12
1 3 51 3
Materials
Body Zinc diecast
Actuator Zinc diecast
Spool Stainless steel
Bushes Brass
Seals Viton (valve body)
Nitrile (actuators)
Spring housing Nylon (acetal resin)
Ordering information
Part nos. Type Actuator Return Mid Symbol Optional air pilot return
&
Directional control valves G1/4, 3/3 - 5/3
3/3 valve dimensions (mm)
G1/4
72
27
10
92
190
57
32
42
89
38
76
10,5 10,5
4,8
G1/4
72
27
10
114
212
9 68
11 11
4,8
38
32
76
42
89
21,5 21,5
'
Directional control valves G1/4
Foot guard kit
To suit G1/4 foot operated spool valves:
B53003FS, B53004FS
156
206 162
The guard completely encloses the valve and is designed Part no. 3117
to prevent both accidental operation and protect the
operators foot from small metal fragments, dirt and grease.
!
Directional control valves G1/4
External air supplies
All solenoid-pilot operated valves have internal pilot air Internal pilot supply provides the same pressure for both
supply from a drilling within the valve, but are provided main valve and pilot supply - with the use of external pilot
with an external port normally sealed by a blanking plug. supply variation of pressure on the solenoid operator is
possible. When using solenoid valves with any medium
other than air, then an external air supply must be made to
the pilot to facilitate valve changeover.
If it is required to use external pilot supply, then the For applications using any medium other than air (i.e.
blanking plug should be removed from the port and the vacuum or low pressure oil) we recommend you consult
smaller plug contained underneath inserted into the Technical Sales prior to operation.
internal counter bore drilling to seal off the internal air
supply.
Repair kits
Lubricating oils
!
Pneumatic
Service and Replacement Parts