Documentos de Académico
Documentos de Profesional
Documentos de Cultura
990FXA GAMING
Motherboard
G52-78931X1
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
Preface
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks in this manual are properties of their respective owners.
MSI is registered trademark of Micro-Star Intl Co.,Ltd.
NVIDIA is registered trademark of NVIDIA Corporation.
ATI is registered trademark of AMD Corporation.
AMD is registered trademarks of AMD Corporation.
Intel is registered trademarks of Intel Corporation.
Windows is registered trademarks of Microsoft Corporation.
AMI is registered trademark of American Megatrends Inc.
Award is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster is registered trademark of Creative Technology Ltd.
Realtek is registered trademark of Realtek Semiconductor Corporation.
JMicron is registered trademark of JMicron Technology Corporation.
Netware is registered trademark of Novell, Inc.
Lucid is trademark of LucidLogix Technologies, Ltd.
VIA is registered trademark of VIA Technologies, Inc.
ASMedia is registered trademark of ASMedia Technology Inc.
iPad, iPhone, and iPod are trademarks of Apple Inc.
Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.
Revision History
Revision Revision History Date
V1.0 First release 2015/ 04
Preface ii
Smartphone Application
MSI+ is a smart web gadget that works as a shopping navigator and
provides specs comparison for IT buyers. With a simple tap of the
smartphone, you'll efficiently locate your ideal products from a wide
Preface
variety of choices and, if product details are required, you may easily
download user manuals within minutes. Better yet, the power calculator
provides accurate estimates of power unit capacity for DIY users.
Technical Support
If a problem arises with your system and no solution can be obtained from the users
manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.
iii Preface
Safety Instructions
Always read the safety instructions carefully.
Keep this Users Manual for future reference.
Keep this equipment away from humidity.
Preface
Preface iv
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Preface
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply
with the emission limits.
VOIR LA NOTICE DINSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7893
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
v Preface
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment and its antenna should be installed and
operated with minimum distance 20 cm between the radiator and your body. This
Preface
equipment and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
Preface vi
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of
as unsorted household waste. Please use the public collection system
Preface
to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
vii Preface
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must
Preface
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen
Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt werden.
MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,
die in die Europische Union in Verkehr gebrachten Produkte, am Ende seines
Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle in Ihrer Nhe.
FRANAIS
En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler ceci...
Au sujet de la directive europenne (EU) relative aux dchets des quipement
lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005,
que les produits lectriques et lectroniques ne peuvent tre dposs dans les
dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipements
seront obligs de rcuprer certains produits en fin de vie. MSI prendra en compte
cette exigence relative au retour des produits en fin de vie au sein de la communaut
europenne. Par consquent vous pouvez retourner localement ces matriels dans
les points de collecte.
MSI ,
, ....
()
( WEEE 2002/96/EC), 13
2005 , ,
, ,
. MSI
, MSI
EC, .
.
Preface viii
ESPAOL
MSI como empresa comprometida con la proteccin del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/o
equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
Preface
clasificados como elctricos y equipos electrnicos no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrnicos,
estn obligados a hacerse cargo de dichos productos al termino de su perodo de
vida. MSI estar comprometido con los trminos de recogida de sus productos
vendidos en la Unin Europea al final de su periodo de vida. Usted debe depositar
estos productos en el punto limpio establecido por el ayuntamiento de su localidad o
entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat.
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan
kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort
producten worden verplicht om producten retour te nemen aan het eind van hun
levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirodnoj
sredini, MSI mora da vas podesti da
Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opremi,
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji
spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni kao obian
otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove proizvode na kraju
njihovog uobiajenog veka trajanja. MSI e potovati zahtev o preuzimanju ovakvih
proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU.
Ove proizvode moete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI
przypomina, e...
Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw
elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13
sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie
mog by traktowane jako mieci komunalne, tak wic producenci tych produktw
bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z
uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na terenie
Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca w
wyznaczonych punktach zbiorczych.
ix Preface
TRKE
evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr:
Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme At, 2002/96/EC
Kararnamesi altnda 13 Austos 2005 tarihinden itibaren geerli olmak zere,
Preface
ESKY
Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje...
Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch vrobk
2002/96/EC platn od 13. srpna 2005 je zakzno likvidovat elektrick a elektronick
vrobky v bnm komunlnm odpadu a vrobci elektronickch vrobk, na kter
se tato smrnice vztahuje, budou povinni odebrat takov vrobky zpt po skonen
jejich ivotnosti. Spolenost MSI spln poadavky na odebrn vrobk znaky
MSI, prodvanch v zemch EU, po skonen jejich ivotnosti. Tyto vrobky mete
odevzdat v mstnch sbrnch.
MAGYAR
Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt fellpve
az MSI emlkezteti nt, hogy ...
Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos
s elektronikus berendezsek hulladkairl szl 2002/96/EK irnyelve szerint
az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi
hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az
ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI betartja a
termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az EU-n
bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen termkeket
a legkzelebbi gyjthelyre viheti.
ITALIANO
Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che.
In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono pi essere eliminati
come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni
prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale Direttiva ritirando tutti i
prodotti marchiati MSI che sono stati venduti allinterno dellUnione Europea alla fine
del loro ciclo di vita. possibile portare i prodotti nel pi vicino punto di raccolta
Preface x
Contents
Preface i
Copyright Noticeii
Preface
Trademarksii
Revision Historyii
Smartphone Applicationiii
Technical Supportiii
Safety Instructionsiv
FCC-B Radio Frequency Interference Statement v
CE Conformity v
Radiation Exposure Statementvi
European Community Compliance Statementvi
FCC Bluetooth Wireless Compliancevi
Bluetooth Industry Canada Statementvi
Taiwan Wireless Statementsvi
Japan VCCI Class B Statementvi
Korea Warning Statementsvi
Battery Informationvii
Chemical Substances Informationvii
WEEE (Waste Electrical and Electronic Equipment) Statement viii
Chapter 1 Getting Started1-1
Packing Contents 1-2
Assembly Precautions 1-3
Motherboard Specifications 1-4
Connectors Quick Guide 1-6
Back Panel Quick Guide 1-8
CPU (Central Processing Unit) 1-10
Introduction to AM3/ AM3+ CPU 1-10
CPU & Cooler Installation 1-11
Memory 1-13
Dual-Channel mode Population Rule 1-13
Mounting Screw Holes 1-14
Power Supply 1-15
JPWR1~2: ATX Power Connectors 1-15
Expansion Slots 1-16
PCI_E1~5: PCIe Expansion Slots 1-16
Video/ Graphics Cards 1-17
Single Video Card Installation 1-17
Internal Connectors 1-18
SATA1~6: SATA Connectors 1-18
xi Preface
CPUFAN,SYSFAN1~4: Fan Power Connectors 1-19
JFP1, JFP2: System Panel Connectors 1-20
JUSB13: USB 2.0 Expansion Connectors 1-21
JCI1: Chassis Intrusion Connector 1-22
Preface
Preface xii
Appendix A Realtek Audio A-1
Software ConfigurationA-2
Software panel overviewA-2
Auto popup dialogA-3
Preface
Hardware Default SettingA-4
Appendix B AMD RAID B-1
RAID ConfigurationB-2
Installing DriverB-8
Installing OS on 2.2TB RAIDB-9
xiii Preface
Chapter 1
Getting Started
Thank you for choosing the 990FXA GAMING Series (MS-7893 v1.X) ATX
motherboard. The 990FXA GAMING Series motherboards are based on
AMD 990FX & SB950 chipset for optimal system efficiency. Designed to fit
the advanced AMD AM3/ AM3+ processor, the 990FXA GAMING Series
motherboards deliver a high performance and professional desktop platform
solution.
Packing Contents
* These pictures are for reference only and may vary without notice.
* The packing contents may vary according to the model you purchased.
Chapter 1
whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
Do not use the computer in a high-temperature environment.
Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
technician.
Important
A screwdriver (not included) may be required for computer assembly.
1x PCI slot
Multi-GPU Supports 3-Way AMD CrossFireTM Technology*
Support Supports 2-Way NVIDIA SLITM Technology
* Supports Windows 7 and Windows 8/ 8.1.
Chapter 1
1x Slow mode booting switch
I/O Controller Fintek 71878 Controller Chip
Hardware CPU/System temperature detection
Monitor CPU/System fan speed detection
CPU/System fan speed control
BIOS Features 64 Mb flash
UEFI AMI BIOS
ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0
Multi-language
Special Military Class 4
Features Military Class Essentials
OC Genie 4
CLICK BIOS 4
AMD CrossFire
NVIDIA SLI
USB 3.1
SATA 6Gb/s
Command Center
Fast Boot
GAMING APP
Super Charger
Live Update 6
M-Flash
Software Drivers
MSI
-- Command Center
-- Live Update 6
-- Fast Boot
7-ZIP
Sound Blaster Cinema 2
Killer Network Manager
Norton Internet Security Solution
Form Factor ATX Form Factor
12 in. x 9.6 in. (30.5 cm x 24.4 cm)
DIMM4
JPWR2 DIMM3
DIMM2 SYSFAN3
DIMM1
SYSFAN1 CPUFAN
CPU Socket
Chapter 1
Back Panel
JPWR1
SLOW_MODE
PCI_E1
SYSFAN2
PCI_E2
SATA5_6
PCI_E3
SATA3_4
PCI_E4
SATA1_2
PCI_E5
JBAT1
PCI1
JCI1
JCOM1 JFP2
JAUD1 JTPM1 JFP1 JUSB4
SYSFAN4
JUSB1 JUSB3
JSP1
JUSB2
Chapter 1
JCOM1 Serial Port Connector 1-23
PS/2 Keyboard/
Mouse combo Port LAN Port
USB 2.0 Port USB 2.0 Port USB 3.1 Port Line-In RS-Out
Optical
S/PDIF-Out Line-Out CS-Out
Mic SS-Out
Important
In order to use USB 3.0/ 3.1 devices, you must connect to a USB 3.0/ 3.1 port. If a
USB cable is used, it must be USB 3.0/ 3.1 compliant.
LAN Port
The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).
LED LED Status Description
Off No link
Chapter 1
Important
Overheating
Overheating can seriously damage the CPU and motherboard. Always make sure the
cooling fans work properly to protect the CPU from overheating. Be sure to apply an
even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn off the systems power supply and unplug the
power supplys power cord to ensure the safety of the CPU.
Overclocking
This motherboard is designed to support overclocking. Before attempting to overclock,
please make sure that all other system components can tolerate overclocking. Any
attempt to operate beyond product specifications is not recommend. MSI does not
guarantee the damages or risks caused by inadequate operation beyond product
specifications.
1. Pull the lever sideways away from the socket. Make sure to raise the lever up to a
90-degree angle.
2. Look for the gold arrow of the CPU. The gold arrow should point as shown in the
picture. The CPU can only fit in the correct orientation.
Chapter 1
3. If the CPU is correctly installed, the pins should be completely embedded into
the socket and can not be seen. Please note that any violation of the correct
installation procedures may cause permanent damages to your motherboard.
4. Press the CPU down firmly into the socket and close the lever. As the CPU is
likely to move while the lever is being closed, always close the lever with your
fingers pressing tightly on top of the CPU to make sure the CPU is properly and
completely embedded into the socket.
7. Then press down the other end of the clip to fasten the cooling set on the top of
the retention mechanism. Locate the Fix Lever and lift up it.
8. Fasten down the lever.
9. Attach the CPU Fan cable to the CPU fan connector on the motherboard.
Important
While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an
eye on your fingers, because once the Safety Hook is disconnected from the fixed
bolt, the fixed lever will spring back instantly.
Confirm that the CPU cooler has formed a tight seal with the CPU before booting
your system.
Please refer to the documentation in the APU cooler package for more details about
CPU cooler installation.
DIMM1
DIMM2
DIMM3
DIMM4
Chapter 1
Video Demonstration
Watch the video to learn how to install memories.
http://youtu.be/76yLtJaKlCQ
DIMM1
DIMM1 DIMM2
DIMM3
DIMM3 DIMM4
Important
DDR3 memory modules are not interchangeable with DDR2, and the DDR3
standard is not backward compatible. Always install DDR3 memory modules in
DDR3 DIMM slots.
To ensure system stability, memory modules must be of the same type and density
in Dual-Channel mode.
Due to chipset resource usage, the system will only detect up to 31+ GB of memory
(not full 32 GB) when all DIMM slots have 8GB memory modules installed.
Important
Install the motherboard on a flat surface free from unnecessary debris.
To prevent damage to the motherboard, any contact between the motherboard
circuitry and the computer case, except for the mounting stands, is prohibited.
Please make sure there are no loose metal components on the motherboard or
within the computer case that may cause a short circuit of the motherboard.
Video Demonstration
Watch the video to learn how to install power supply connectors.
http://youtu.be/gkDYyR_83I4
Chapter 1
JPWR2
4 .G ro un
.G ro u d
3 .G ro
ro un nd
2 .G
u d
1
n
d
8 .+1 2 V
.+ 2 V
7 .+1 12
1 V
6 .+
2
V
5
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 5 W u
3 V
.3
9 P ro
.
V
8 .G 5V un
.
7 .+ ro
JPWR1
6 .G 5V un
5 .+ ro 3V
4 .G . V
3 .+3 3.3
2 .+
d
1
2 3.+ +5 V
d
4
2 2. +5 s un d
.G 5 V
2 . e o n d
ro
2 .R Gr ou n #
u
1
V
2 9. Gr rou ON d
n
0
d
1 8.
1 7.G PS ou
1 6. Gr 2V V
1 5. 1 .3
1 4.- +3
d
1 3.
- n
1
Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.
PCIe x1 Slot
PCI Slot
Important
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
cards documentation to check for any necessary additional hardware or software
changes.
Chapter 1
out of the computer case. For a single video card installation, using the PCI_E2
slot is recommended.
3. Push the video card into its expansion slot(s). Depending on the expansion slot(s)
used, there should be clip(s) on the expansion slot(s) that will lock in place.
4. If needed, screw the edge of the graphics card to the computer case. Some video
cards might require a power cable directly from the power supply.
5. Please consult your video cards manual for further instructions regarding driver
installation or other special settings.
Video Demonstration
Watch the video to learn how to Install SATA HDD.
http://youtu.be/RZsMpqxythc
Chapter 1
SATA6
SATA4
SATA2
SATA5
SATA3
SATA1
Important
Many SATA devices also need a power cable from the power supply. Such devices
include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /
Blu-Ray). Please refer to the devices manual for further information.
Many computer cases also require that large SATA devices, such as HDDs, SSDs,
and optical drives, be screwed down into the case. Refer to the manual that came
with your computer case or your SATA device for further installation instructions.
Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
CPUFAN
1 + en e
.G 1 s d
2 .S pe
.
ro 2V e Co
3 .S
Chapter 1
u
4
n
d
n
tr
o
l
SYSFAN1/
SYSFAN2
1 .S en
.G p s
2 S C
ro ee e
3 .N
.
u d
4
n C
d o
n
tr
o
l
SYSFAN3/
1 .+ o U
.G 1
2 .N
SYSFAN4
ro 2V se
3
u
n
d
Important
Please refer to your processors official website or consult your vendor to find
recommended CPU heatsink.
These connectors support Smart Fan Control with liner mode. The Command
Center utility can be installed to automatically control the fan speeds according to
the CPUs and systems temperature.
If there are not enough ports on the motherboard to connect all system fans,
adapters are available to connect a fan directly to a power supply.
Before first boot up, ensure that there are no cables impeding any fan blades.
Video Demonstration
Watch the video to learn how to Install front panel connectors.
http://youtu.be/DPELIdVNZUI
r
ake
Chapter 1
Spe zer
Buz
8
.+
6 .+
.-
4 -
2
.
7 .Po sp n
.N w e d
5 u rou
JFP2
o e n
3 .G
P rL d
. S
in E LE
1
D D
P
o
w
e
r
S
P
1
w
0
o
it
.N
w
ch
e
o 8.
r
P -
L
in
E
D
6
.+
4 +
.-
2
.
9
.R
7 .-
e R
. +
5 -
se e
JFP1
3 .+
rv e
.
e
1
d
s
H
t
D
S
D
w
it
L
ch
E
D
Important
On the connectors coming from the case, pins marked by small triangles are
positive wires. Please use the diagrams above and the writing on the optional M-
Connectors to determine correct connector orientation and placement.
The majority of the computer cases front panel connectors will primarily be plugged
into JFP1.
1 .G S B1
0 r B -
.N o 1
8 U
C un +
6 U C
. S
4 VC
.
2
d
.
9 G B 0-
.N ro 0
7 .US B
o u +
.
5
P nd
in
3 .V
. U
1
S C
Chapter 1
C
Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
.N w 3 R
9
1 7.U Gr B3 _T
o e _R X
1 6. S B3 nd -
P r X _
in
1 .U S u .0 +
1 4.U r B2 .0
5
1 3.G S B2
1 2.U S
_ DP
D
1 1.U
N
T
1
_ _
C D
_ P
D
N
1 .U SB un T _
.P S 3 d X C
2 .U ro 3_ TX
o B3 _R _C _D
3 .G SB 3_ d -
w _
e R X
4 .U B n 0
r X _
5 S u 2. 0 +
6 .G SB 2. nd
.U ro
7 U B u
_ DP
D
8 .U ro
. S
N
9 0.G
1
_ P
D
N
Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
To use a USB 3.0 device, you must connect the device to a USB 3.0 port through
an optional USB 3.0 compliant cable.
1 .G
.C ru
2
Chapter 1
IN o
T nd
R
U
JTPM1: TPM Module Connector
This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
1 2.G o Po IR we y p
4
1 .N V ial o b
.G ro Pi we Q r ow
1 .5 er P nd
ro un n r
0
u d
8 .S 3V ta
n
d
6 .3. S
4 .3V
2
1 1.L C a dd et
e
3 P a d re
r
1 .LP C a es k
.L C d d s
P
9 .LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
ra re s
5 P C
m s & da ta
3 .LP
e s & da ta pi
. L
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
1 .C S
0 T R
.N S
8 D R
o
6 T
P
.
in
4 SI
.D N
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 SO C D
3 .D
.
1
Chapter 1
JAUD1: Front Panel Audio Connector
This connector allows you to connect the front audio panel located on your computer
case.
1 .N IC
0 o
.H P D
8 M
e in et
6 .N ou
a
.
d
4 Gr
P
h
2
o
.
n
e
e
D
ct
n
e
io
d
te
n
ct
io
n
9 .S ea R
.H E d
7 .H IC L
e NS P
5 .M IC
a E h
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
r o DI
3
u F
n
d
1 1
Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.
Enabled
Normal
Chapter 1
(Default)
Important
Users will try extreme low temperature overclocking at their own risks. The
overclocking results will vary according to the CPU version.
You can protect your computer from viruses by installing the bundled security
program. The bundle also includes a variety of powerful and creative utilities.
Click here
4. The software installation will then be in progress, after it has finished it will prompt
you to restart.
5. Click OK button to finish.
6. Restart your computer.
You can also use the same method to install the utilities.
Quick Installation
This chapter provides demonstration diagrams about how to install your
computer. Some of the installations also provide video demonstrations.
Please link to the URL to watch it with the web browser on your phone or
tablet. You may have even link to the URL by scanning the QR code.
Important
The diagrams in this chapter are for reference only and may vary from the
product you purchased.
CPU Installation
1 2
3 4
Chapter 2
Chapter 2
7
http://youtu.be/76yLtJaKlCQ
1
Chapter 2
Chapter 2
2
http://youtu.be/gkDYyR_83I4
Chapter 2
88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
or
88
E6 SI 88
M C4 E6 SI
M M C4
M
88
E6 SI 88
M C4 E6 SI
M M C4
M
88
E6 SI 88
M C4 E6 SI
M M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
Chapter 2
http://youtu.be/RZsMpqxythc
or
Chapter 2
2
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
88 E6 I
E6 I MS 4
MS 4 MC
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
or
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
88 E6 I
E6 I MS 4
MS 4 MC
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
http://youtu.be/DPELIdVNZUI
REST SW
POWER SW
H.D.D. LED
POWER LED
RSVD_DNU
RSVD_DNU
RST_SW+
RST_SW+
RST_SW-
HD_LED-
RST_SW-
HD_LED+
PWR_SW-
FP PWR/SLP
PWR_SW+
HD_LED-
FP PWR/SLP
HD_LED+
88
E6 I
MS 4
MC
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
Chapter 2
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
E6 I
MS 4
MC
88
E6 SI
M C4
M
88
E6 SI E68
8
M C4 MSI
MC4
M 8
E68
MSI
MC4
8
E68
MSI
MC4
88 8
E6 SI E68
MSI
M C4 MC4
M
88
E6 SI
M C4
M
or
B
US B
US
88 88
E6 SI E6 SI
M C4 M C4
M M
8 8
E68 E68
MSI MSI
MC4 MC4
8 8
E68
Chapter 2
E68 MSI
MSI MC4
MC4 8
8
E68 E68
MSI MSI
MC4 MC4
8 8
E68 8 E68 8
MSI MSI E68
MC4 E68 MC4 MSI
MSI MC4 8
MC4 8
E68 8 E68
8 MSI MSI
E68 MC4 E68 MC4
MSI MSI
MC4 8 MC4 8
E68 E68
MSI MSI
MC4 MC4
88 88
E6 SI E6 SI
M C4 M C4
M M
88
E6 SI
M C4
M
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
8
E68
MSI
MC4
88
E6 SI
M C4
M
88
E6 SI
M C4
M
88
E6 SI
M C4
M
http://youtu.be/mG0GZpr9w_A
1
Chapter 2
Chapter 2
5
BIOS Setup
CLICK BIOS is a revolutionary UEFI interface that allows you to setup and
configure your system for optimum use. Using your mouse and keyboard,
users can change BIOS settings, monitor CPU temperature, select the boot
device priority and view system information such as the CPU name, DRAM
capacity, the OS version and the BIOS version. Users can import and export
parameter data for backup or for sharing with friends.
Important
The items under each BIOS category described in this chapter are
under continuous update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be held
for reference only.
The pictures in this chpater are for reference only and may vary from the
product you purchased. Please refer to the actual screens of your system
for detailed information.
Please clear the CMOS data and restore the default settings if the system
becomes unbootable after changing BIOS settings. (Refer to the Clear
CMOS jumper/ button section to clear the CMOS data, select the "Restore
Defaults" and press <Enter> in BIOS to load the default settings.)
Entering Setup
The default settings offer the optimal performance for system stability in normal
conditions. You may need to run the Setup program when:
An error message appears on the screen during the system booting up, and
requests you to run SETUP.
You want to change the default settings for customized features.
Important
Please load the default settings to restore the optimal system performance and
stability if the system becomes unstable after changing BIOS settings. Select the
"Restore Defaults" and press <Enter> in BIOS to load the default settings.
Please clear the CMOS data and restore the default settings if the system becomes
unbootable after changing BIOS settings. (Refer to the Clear CMOS jumper/ button
section to clear the CMOS data, select the "Restore Defaults" and press <Enter> in
BIOS to load the default settings.)
If you are unfamiliar with the BIOS settings, we recommend that you keep the
default settings to avoid possible system damage or failure booting due to
inappropriate BIOS configuration.
GO2BIOS tab on MSI Fast Boot utility screen or press the physical GO2BIOS"
button (optional) on the motherboard to enable the system going to BIOS setup
directly at next boot.
Important
Please be sure to install the MSI Fast Boot utility before using it to enter the BIOS
setup.
Virtual OC
Genie Button
Boot device
priority bar
BIOS menu
selection
BIOS menu
selection
Menu display
Important
We recommend that you do not to make any modification in OC menu mode and do
not to load defaults after enabling the OC Genie function.
Menu display
This area provides BIOS setting items and information to be configured.
Boot device priority bar
You can move the device icons to change the boot priority.
System information
Shows the time, date, CPU name, CPU frequency, DRAM frequency, DRAM capacity
and the BIOS version.
Language
Allows you to select the language of the BIOS setup.
Temperature monitor
Shows the temperatures of the processor and the motherboard.
Chapter 3
.
Move the cursor
<Enter> Select Icon/ Field
Click/ Double-click
the left button
<Esc> Jump to the Exit menu or return to the previous
from a submenu
System Status
System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month> The month from Jan. through Dec.
<date> The date from 1 to 31 can be keyed by numeric function keys.
<year> The year can be adjusted by users.
System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.
SATA Portx
Show the information of connected SATA device.
Important
Chapter 3
If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.
System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).
Boot
Sets the sequence of system boot devices.
Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] The OS boots straight to the GUI without showing the POST screen.
[Disabled] Shows the POST messages at booting.
Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become unselectable and will be configured
automatically by BIOS when Windows 8 Feature is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot.
FIXED BOOT ORDER Priorities
Sets device priority for system boot.
Boot Option #1~N
These items are used to prioritize the installed boot devices.
Security
Administrator Password
Sets administrator password for system security. Enters the administrator password if
set; user has full rights to change the BIOS items.
User Password Chapter 3
Sets User Password for system security. Enters the user password if set; but user
might have limited rights to change the BIOS items.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
Important
Overclocking your PC manually is only recommended for advanced users.
Overclocking is not guaranteed, and if done improperly, can void your warranty or
severely damage your hardware.
If you are unfamiliar with overclocking, we advise you to use OC Genie for easy
overclocking.
Important
If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
The greater the Spread Spectrum value is, the greater the EMI is reduced, and
Chapter 3
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
Important
When adjusting CPU Ratio, the CoolnQuiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD CoolnQuiet as Disabled to retain the default CPU core speed.
C1E Support
Enables this item to reduce the CPU power consumption while idle. Not all
processors support Enhanced Halt state (C1E).
SVM Mode [Enabled]
Enables or disables CPU Virtualization.
[Enabled] Enables CPU Virtualization and allows a platform to run multiple
operating systems in independent partitions. The system can
function as multiple systems virtually.
[Disabled] Disables this function.
IOMMU Mode
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.
Core C6 State
Chapter 3
This item allows you to enable/ dsiable C6 state support. When the CPU enters C6
state, all cores will save architectural state and reduce core voltages to zero volts.
Wake up the CPU from C6 state will take a lot longer.
Important
M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format
only).
Save BIOS to storage
Saves the current BIOS file to the USB flash disk. The USB flash disk drive should be
in FAT32 format.
Update BIOS
Selects a BIOS file in the USB flash disk (NTFS/ FAT32 format) to update the BIOS.
Select one file to update BIOS
Selects a BIOS file in the USB flash disk (NTFS/ FAT32 format) to update the
BIOS. The system will reboot after updating.
Chapter 3
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the sub-
menu.
Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Names the current overclocking profile.
Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Saves the current overclocking profile.
Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Loads the current overclocking profile.
Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clears the current overclocking profile.
OC Profile Save to USB
Saves OC profile to the USB flash disk drive. The USB flash disk should be FAT32
format only.
OC Profile Load from USB
Chapter 3
Loads OC profile from the USB flash disk drive. The USB flash disk should be FAT32
format only.
Fan
control field
Voltage
display
a
b d
c e
f
Important
The minimum values of temperature and speed can not be set larger then the
maximum values.
The changed settings will become effective after you save the changes and reboot
the system.
Voltage display
Shows the current voltages of CPU, system and memory.
Chapter 3
Realtek Audio
The Realtek audio provides 10-channel DAC that simultaneously supports 7.1
sound playback and 2 channels of independent stereo sound output (multiple
streaming) through the Front-Out-Left and Front-Out-Right channels.
Software Configuration
After installing the audio driver (see Chapter 1 - Driver and Utilities), the Realtek HD
Audio Manager icon will appear at the notification area (lower right of the screen).
Appendix A
You may double click the icon and the GUI will pop up accordingly.
It is also available to enable the audio driver by clicking the Realtek HD Audio
Manager from the Control Panel.
Appendix A
You can control the volume or balance the right/left side of the speakers that you
plugged in front or rear panel by adjust the bar.
Application Enhancement
The array of options will provide you a complete guidance of anticipated sound effect
for both output and input device.
Jack status panel
This panel depicts all render and capture devices currently connected with your
computer.
As you know, each jack corresponds to its default setting, you can refer to the next
section Hardware Default Setting.
Fro
nt
Fro
nt
Rea
r
Fro
nt
Appendix A
Cen Rea
ter r
&S
ubw
oof
er
Fro
nt
Cen Rea
ter r
&S
ubw
oof
S id er
eS
urro
und
AMD RAID
This appendix will assist users in configuring and enabling RAID functionality.
RAID Configuration
Creating and deleting RAID set and performing other RAID setting up operations are
done in the RAID BIOS. During boot-up, a screen similar to the one below will appear
for about few seconds. Press <Ctrl-F> to enter RAID Option ROM utility.
Important
Be sure to enable the RAID function for SATA device in BIOS before configuring the
Appendix B
The RAID Option ROM utility menu screen will appear. The Main Menu is used to
choose the operation to be performed.
Appendix B
2. And then press [Ctrl + C] keys to enter the LD Define Menu. Use the space key
to choose a RAID mode (RAID 0/ 1/ 10/ 5) and use the arrow key to move to the
Drives Assignments window.
3. On the Drives Assignments window, use the arrow key to choose the hard
drives which you want to make part of the LD, use the space key to change the
assignment to Y. Then press [Ctrl+Y] to save the configuration.
Appendix B
4. A message will show, press [Ctrl + Y] to input a LD name as your desire or press
any key to save default LD name.
5. Another message will show, press [Ctrl-Y] if you are sure to erase the MBR data
of the disk. Or press any key to ignore this option.
Important
The default capacity is the full capacity of the selected hard drives.
If you allocate the first LD capacity manually, you can create second LD with
remaining capacity of the selected hard drives.
7. The LD creation is done, the screen shows the LD information as below. Press
Appendix B
8. Press ESC key to exit the utility, a message System is going to REBOOT! Are
You Sure? will display, answer Y to exit it and the system will reboot.
Appendix B
3. On the next screen, a message will display to inform you, press Ctrl+Y to delete
the RAID set or other key to abort it. Press Ctrl+Y to complete the deletion.
Important
Please follow the instruction below to make an AMD RAID Driver for yourself.
Insert the MSI Driver Disc into the optical drive.
Appendix B
WARNING
Create raid array will erase all the data stored on hard drives! Make sure to back up
your files! There is no way to reverse the process!
Appendix B
3. Set the Board SATA RAID ROM option to UEFI DRIVER.
4. Save and then reboot. Press F11 while system booting to access boot device
selecting menu.
5. Select UEFI: Built-in EFI Shell to access the EFI Shell environment.
6. Type drvcfg at the EFI shell prompt, it will show values of current configurable
items.
Shell> drvcfg
Configurable Components
Drv[40] Ctrl[B2] Lang[eng]
7. Refer to the value in [Drv] and [Ctrl], Type example drvcfg -s 40 b2.
Shell> drvcfg -s 40 b2
10. Make sure there are not any logical drivers (as shown below).
+ Logical Drive Delete Menu
11. Back to Logical Driver Main Menu and select Logical Driver Create Menu.
+ Logical Drive Main Menu
+ Basic Setting
- Raid Mode : <RAID 0>
- Stripe Block (KB) : <64>
- Initialization : <Fast>
- Gigabyte Boundary : <Enable>
- Read Policy : <Read Ahead>
- Write Policy : <Write Back>
- Ld Name : _
+ Ld Size Setting
13. Choose RAID member disks by pressing arrow key and space key.
+ Logical Drive Create Menu
+ Basic Setting
- Raid Mode : <RAID 0>
- Stripe Block (KB) : <64>
- Initialization : <Fast>
- Gigabyte Boundary : <Enable>
- Read Policy : <Read Ahead>
- Write Policy : <Write Back>
Appendix B
- Ld Name : raidsys_
+ Ld Size Setting
+ Basic Setting
- Raid Mode : <RAID 0>
- Stripe Block (KB) : <64>
- Initialization : <Fast>
- Gigabyte Boundary : <Enable>
- Read Policy : <Read Ahead>
- Write Policy : <Write Back>
- Ld Name : raidsys_
+ Ld Size Setting
- Ld Max Size : 3000.60 GB
- Ld Size (GB) : [0]
+ Start To Create
16. When prompt Are You Sure To Create Logical Drive? press Enter to confirm it.
18. Exit RAID ROM by pressing F10. When prompt Are you Sure To Exit press Y.
19. After exiting RAID ROM, system will prompt you to restart computer (shown as
below). Insert Windows 7/ 8 64bit DVD into the DVD drive. Press Enter to reboot.
Drv[40] Ctrl[B2] Lang[eng] - Options Set.
Appendix B
20. Press F11 while system booting to access boot device selecting menu.
21. Select DVD drive that contain Windows 7/ 8 64bit DVD. System will start the
Windows 7/ 8 64bit installation by booting from the Windows 7/ 8 64bit DVD.
22. When require HDD driver, insert a USB flash drive that contain AMD RAID driver
into a USB 2.0 port (not USB 3.0 port) and click Browse.
Important
You can find the AMD RAID driver from MSI Driver Disc. The path is
\\ChipSet\RICHLAND_W7_W8\Packages\Drivers\SBDrv\hseries\RAID
Please copy all the files in the folder to a USB flash drive.
Appendix B
24. Install AMD AHCI Compatible RAID Controller.
25. Windows 7/ 8 64bit can find the RAID volume now. Please continue the installing
procedure.