Documentos de Académico
Documentos de Profesional
Documentos de Cultura
CONEXIONADO EN CENTRAL:
Configuracin original:
Cambio de Jumpers
-Al finalizar todos los Jumpers se recomienda verificar las cruzadas nuevamente
mediante el mtodo micrfono/cortocircuito punto a punto.
ADLT
PSPC
E1LT
E3LT
SANT
E3NT
E1NT
AACU
Identificacin:
Diagrama en bloques:
Hardware:
LEDs:
Identificacin:
Especificaciones:
Transmitter Characteristics
Transmitted central wavelength : 1261 to 1360 nm
Maximum spectral width : 7.7 nm
Mean launched power : -15.0 to -8.0 dBm
Minimum extinction ratio : 8.2 dB
Receiver Characteristics
Minimum RX sensitivity : -31 dBm
RX overload at maximum input power : -8.0 dBm
Diagrama en bloques:
Hardware:
LEDs:
Identificacin:
Funcionalidades:
Diagrama en bloques:
5.D) E3NT-A:
Identificacin:
Diagrama en bloques:
uso en Mini-Ram:
Funcionalidades:
LEDs
5. E) E1NC-A
Identificacin:
Hardware:
5. F) ADSE-A
Identificacin:
Diagrama en bloques:
Hardware:
LEDS:
Identificacin:
Diagrama en bloques:
Uso en Mini-Ram:
Funcionalidades:
5. H) MINI-RAM
Identificacin:
Diagrama en bloques:
Posible equipamiento:
5. I) Ingeniera:
Identificacin:
Funcionalidades:
Provides the circuitry required for combining the Plain Old Telephone Service
(POTS) voice and the Asymmetric Digital Subscriber Line (ADSL) data transmit
signals to the subscriber.
Provides the circuitry required for separating the POTS voice signal received
from the subscriber.
Provides the circuitry required for protecting the POTS from voice band
interference from signals generated by both the Synchronous ATM Network
Termination (SANT) unit and the ADSL Line Termination (ADLT) unit.
Provides the circuitry required for protecting both the subscriber and the
Central Office (CO) receivers from all POTS related signals
Hardware:
Identificacin:
Funcionalidades:
Standard UT9 rack, with the possibility for floor and/or wall mounting.
Alcatel-provided ADSL rack is supplied with top rack unit, subracks, power
cabling, and alarm bus cable installed.
Required mounting hardware is supplied with rack.
Hardware:
Identificacin:
Funcionalidades:
Is installed in the ASAM Provides the Interface between the physical medium 75
coax cable at E1 level and the E1LT-A in the ASAM shelf
Diagrama en bloques:
Hardware:
Pin-out
Capacidades comparadas:
4 lneas/placa
12 placas / subrack
48 lneas/subrack
3 subracks/rack
4 racks/ASAM
576 lneas/ASAM
3 W/lnea
12 lneas/placa
16 placas / subrack
192 lneas/subrack
2 subracks/rack
6 racks/ASAM
2304 lneas/ASAM
1,6 W/lnea
E1NT-A
E3NT-A o SANT-D:
SANT-E:
Placa SD HD
ADLT - E J
E1LT - A B
E1NT - A
E3NT - A y B C
SANT - D y E F
POWER I/O A:
ADLT- J:
TRU:
SANT F:
E3NT C:
Area de conexin: