Documentos de Académico
Documentos de Profesional
Documentos de Cultura
FOR
Oxy-Acetylene cutting set, complete with oxygen and acetylene cylinders (full), cutting torch, flash-
7 3 sets
back preventers, 150ft. of oxy-acetylene hoses, cylinder keys and associated accessories.
4 Electric hand held grinding machine set, MAKITA or equivalent, each set complete with grinding
8 machine + key, 10m electric cable, and associated PPE (minimum of 2 pair clear goggles and 6 units
gloves), wire brush and grinding disc (set of 6 pcs).
7 Electric hand held grinding machine set, MAKITA or equivalent, each set complete with grinding
9 machine + key, 10M electric cable, and associated PPE (minimum of 2 pair clear goggles and 6 units
gloves), wire brush and grinding disc (set of 6 pcs).
Electric pencil grinding machine set, Makita or equivalent, each set complete with grinding
10 machine + key, 10m electric cable, and associated PPE (minimum of 2 pair clear goggles, 2 face 2 sets
shield and gloves), wire brush and a set of 6 different grinding burs.
Electric wet and dry cutting hack saw, skid mounted, each set complete with 6 spare cutting blades
11 1 set
for metal cutting.
Magnetic base drilling machine set, complete with power cord, safety chain, chuck/wedge key, and
12 1 set
drill bits and accessories to drill 1/4 to 2 diameter hole.
Rigid Model 535 pipe threading machine set, complete with threading bits and accessories to
13 1 set
thread 1/8 2 NS pipe and conduit, and 1/4 2 NS rod.
14 Air compressor, INGERSOLL RAND or equivalent, min. 600CFM @ 175psi capacity 1 unit
Hydrotest Pump set, air operated, 68.9MPa (10,000 psi) capacity, complete with 10m hoses,
15 1 set
certified test gauges, valves, test fittings and min. 12m test tubings.
Select-A Torque wrench set that can be operated by one man, set complete with ratchet, ratchet
16 extender, torque multipliers, and sockets for 1/2 2 diameter stud in 3/16 increments, and 2 1 set
3 diameter stud in 3/8 increments.
Propane gas heater set, complete with propane gas cylinder (full), heating torch, flash-back
17 2 sets
preventer, regulator, min. 10m gas hose and accessories.
MIN.
NO. EQUIPMENT DESCRIPTION
QUANTITY
TIG welding machine set, air cold pulse control, each set complete with TIG electrode holder, Argon
18 2 sets
gas cylinder (full), regulator, diffuser cup and Tungsten electrode.
Electric high speed cutting machine set, BOSCH or equivalent, 3900 RPM, complete with spare
21 1 set
cutting disc (set of 6 pcs).
Hammer wrench set, offset pattern, each set comprises of complete range of wrenches for 7/8 2
22 1 set
diameter stud in 3/16 increments, and 2 3 diameter stud in 3/8 increments.
Electric hand drill set, heavy duty, BOSCH or equivalent, complete with drill bits, in both imperial
23 1 set
and metric units, to drill steel up to diameter hole.
24 Heavy duty pipe vise with tripod stand, Rigid or equivalent. 2 units
Combination box/open wrench set, complete with wrench sizes from 6mm 32mm in 1 mm
26 1 set
increments.
Combination box/open wrench set, complete with wrench sizes from to 2 in 1/32
27 1 set
increments.
Combination coarse (NC) and fine (NF) tap and die set, complete with tap wrench, accessories, and
28 1 set
complete tap and die sizes from to 2.
32 diameter wire rope slings, 4ft., 6ft. and 10 ft. length (2 nos. of each length). 6 lengths
33 diameter wire rope slings, 4ft., 6ft. and 10 ft. length (2 nos. of each length). 6 lengths
34 7/8 diameter wire rope slings, 4ft., 6ft. and 10 ft. length (2 nos. of each length). 6 lengths
35 Synthetic web sling, 12 ft. length, 1 ton, 3 tons and 5 tons capacity (1 length for each capacity). 3 lengths
MINIMUM
NO. DESCRIPTION UNIT
QUANTITY
1 Propane gas, 50kg cylinder (full) Cylinder 2
9 4.0mm Electrodes E8016G 88S (or equivalent based on applicable WPS) Kg 200
10 3.2mm Electrodes E8016G 88S (or equivalent based on applicable WPS) Kg 200
11 2.5mm Electrodes E8016G 88S (or equivalent based on applicable WPS) Kg 200
39 TIG Argon gas cylinder (full), complete with regulators with gauges Set 2
Swagelok fittings, various types, sizes, etc (for calibration and hydro-
49 Pcs 50
testing)
MINIMUM
NO. DESCRIPTION UNIT
QUANTITY
Flame-retardant, waterproof, ultra-violet resistant, coated tarpaulin sheet,
50 each sheet of 9ft x 12ft size, hemmed on 4 sides with reinforced grommets Sheet 6
on all sides
52 UV resistant cable tie wrap 3, 6, 12 long, Thomas and Belts Pcs 300
14-piece master file kit set, contains flat, half round, round, mill, and square
65 Set 2
10 all purpose files in rough and smooth cuts, complete with container.
77 Soapstone marking crayon, flat 5 x 1/2 x 3/16, 12 pcs. Per box Box 10
Electrical adhesive tape, Scotch 33+, various color (black, red, yellow, blue,
78 Dozen 5
green) 1 dozen for each color
79 Teflon tape / pipe joint sealers, pure white Teflon, each roll of 1/2 x 50 ft. Roll 20
This attachment describes the minimum requirements for basic tools and items to be provided by
CONTRACTOR for the SERVICES, and the costs for these provisions, including any additional items not listed
but required to complete the SERVICES, shall be deemed to be included in the UNIT RATES and
CONTRACTORs overheads contained in this APPENDIX B and shall not be paid for separately.
1) Adjustable Wrench, 100mm (4), 150mm (6), 200mm (8), 300mm (12),
2) Allen Wrench Set, Imperial Size 1/8 to 3/4, Metric sizes 3mm to 20mm,
3) Channel Lock, 200mm (8),
4) Combination Wrench, Open and Close, Imperial Size 1/4 to 1-1/4 and metric equivalent,
5) Crimping Tool, No. 10 to 16 AWG,
6) Hacksaw complete with 6 spare blades,
7) Digital Voltmeter Multimeter with 0-100 mA / 0- 200 M ohm range (Make: Fluke or equivalent),
8) Intrinsically Safe 2 cell Flashlight,
9) Jeweler Screw Driver, both Flat and Phillips, 1 set,
10) Long Nose Pliers, 75mm NS (3),
11) Loop Calibrator (Make: Altek or equivalent),
12) Measuring Tape, 3 / 5 meter,
13) Open Wrench, Imperial Size 1/32 to 1/4 and metric equivalent,
14) Pipe Wrench, 100mm (4), 150mm (6), 200mm (8), 300mm,
15) Pocket Knife, electrician,
16) Pressure Gauge Pointer Puller, (Make: Ashcroft or equivalent),
17) RTD/TC Simulator (Make: ALTEK or equivalent),
18) Screw Driver, Flat, 100mm (4) NS, 150mm NS (6), 200mm (8),
19) Screw Driver, Phillips, 100mm (4) NS, 150mm NS (6), 200mm (8), 250mm (10), 300mm (12),
20) Screw Driver 75mm NS (3) with Test Light (Philips or equivalent),
21) Side Cutter, 75mm NS (3),
22) Strap Wrench, 150mm (6), 200mm (8),
23) Tool Box,
24) Tube Bender for 1/4, 3/8 and 1/2 tubing (Make: Imperial or equivalent),
25) Tube Cutter with 6 spare blade (Make: Swagelok or equivalent),
26) Tube Deburring Tool (Make: Swagelok or equivalent),
27) Vice Grip Pliers, 200mm (8),
28) Wire Stripper, for No. 10 to 16 AWG,
29) Pressure Gauges (Make: Ashcroft or equivalent) - pressure range as required for work.
30) Plum /Spirit Level (small Size),
31) Stainless Tri-Square (0-15 cm),
32) Stainless Ruler (0-30 cm),
33) Combination Pliers,
34) Terminal Block Screwdriver,
35) Permanent Paint Markers,
36) Current Injector (Make: FLUKE calibrator, LOOP FLUKE 707 or equivalent),
36) HART Communicator
G. SCAFFOLDER
1) Scaffolder knife,
2) Scaffold Clip Wrench, pointed end handle, 7/16,
3) Scaffold Clip Wrench, pointed end handle, 9/16,
4) Full body safety harnesses, ANSI 10.4 Class III Rating with shock absorbing double lanyards.