Documentos de Académico
Documentos de Profesional
Documentos de Cultura
II ECE A
B. SINDHU 159E1A0423
A.P. RAMYA SREE 159E1A0414
C. KIRANMAI 159E1A0442
With advancement in communication technology, the requirement of cell phones has increased manifold.
A cell phone typically transmits and receives signals in the frequency range of 0.9 to 3GHz
So we go for a mobile phone detector that helps to Since the voltage at non inverting terminal of the OPAMP is
detect the cell phone less than the voltage at the inverting terminal, the output
of the OPAMP is low logic signal.
Already in market:::
Now we must try to make the voltage at the non-
In present day market we have many mobile phone inverting terminal of the OPAMP greater than that of
detectors available. Some uses a buzzer to indicate a inverting terminal of the OPAMP ie., output is high
cell phone and some uses LED to indicate it logic signal using a Darlington pair or any amplifier we
can make the output high even when a weak signal
But the drawback in that is they can detect the mobile
visits.
phone only when it is active
Generally, there exists weak signal when there is a
1. Only during incoming and outgoing calls
mobile phone nearby and if this weak signal is amplified
2. During text messages
we can detect even the hidden inactive mobile phone
3. Its better to call those detectors as hidden
active cell phone detector
We are thinking to bring up its efficiency by making it We request our college Research and Development
a real cell phone detector i.e., to make it even detect department to analyse the topic and suggest us in
the hidden inactive mobile phone this regards to bring out a new product
The general detector has a schottky diode (BAT54) Hope you are with us . . . !!
and a transistor(BC547) in it. Mobile phone signal is in
the frequency range of 0.9 to 3GHZ. Schottky diodes
have a unique property of being able to rectify low
frequency signals, with low noise rate. When an
Page 1