si4n017 Tips & Ticks: Seng Up a Fillt-Type Weldwith aNotch| PTC
CAD Software Blog
Tips & Tricks: Setting Up a Fillet-Type Weld with a
Notch
by Bettina Giemsa i/blog-authors/Beltina-Giemsal
Not only does PTC Creo Parametric allow you to configure multiple weld types including fillet, groove, but, plug/slol, and spat welds). But, you
can also easily define welding-related features lke notches.
In fact, with just afew clicks, you can define a cu that enables welds to cross model components without interruption. Keep reading to learn
hhow easy its to set up a filat-type weld with a natch.
Image: Bureing Wish by Tomas Jaramilo va Flickr [tps:f Rick comY/photes/omya/5141574089/n/photolist-HTXTo-ocg2-BS6uts-
‘BUKI2-ng2CF2- pol SE-bp2M@r-582q43-7raush-ESrYA-583475-hg2YFH-3pgoNS-Putinm8-SEh22F-bpSd8)-NpACl.9-SAY9Px-BOKULK-
xanas-asN2te-bp2CPt-pdeTk-ScFDUN-RH-hp3UGs-hp2bPa-BOKUOM-hp2UWY-425uSW-y2VMr-IRGRS-tpaVka-hode2b-TeMevrt-hp3EgS-
SFADGB-SFnBp2-hpSZpr-bpO9U-iROKW-bITTE-77ga7-pOKa-DAHAToAStNni-hpd9Rj-7¥22a-pnCw¥M ade)
Step 1: Setup
Fallow these steps to get states
1..Once you have an existing assembly open, onthe Applications tab click Welding
ip hwurpt.comicad software bloglips-Wicks-soting-up-afilt-ype-woldwith-nctch 4ssi4n017 Tips & Ticks: Seng Up a Fillt-Type Weldwith aNotch| PTC
2. Configure the Medel Tree to show features and suppressed objects. To da this, click the Settings icon (which displays as tools] and then
click Tree Filters. The Model Tree Items cialog box opens (as shown below)
0 0
cae
(Gog ae ce
Use this dialog box to show features and suppressed objects in the Model Tree,
2. On the Left side ofthe Model Tree Items dialog box, select the Features and Suppressed Objects check boxes, and then click OK. Features
‘are now listed in the Model Tree.
4, Right-click the welding rod name and click Edit Definition, The Weld Materials cialeg box opens. Ths dialog box shows the defined rod
parameters
Step 2: Create the weld and notch
Complete these steps to create a filettype weld and a notch,
1. Click Weld Wizard, The Weld Definition dialog opens,
2, On the Weld Definition dialog,
+ Inthe Feature frame, ensure the Notch check box is selected.
+ In the Weld Feature frame, select the Fillet icon.
+ Inthe Notch Feature frame, select the Round corner notch button,
3. Click OK. The Fillet Weld ribbon bar tab opens, as shown below.
4, On your assembly, select the first reference forthe filetype wela
5, Select the Location tab [shown below] inthe fillet weld dashboard:
6. Click inthe Side 2 collector to activate it, and then press the Ctrl key and select the outer surfaces of the model
7. From the Welding ribbon bar menu, click the Apply button (green check mark). The fillet weld feature is created,
ip hwurpt.comicad software bloglips-Wicks-soting-up-afilt-ype-woldwith-nctchsi4n017 Tips & Ticks: Seng Up a Fillt-Type Weldwith aNotch| PTC
The newly created filet weld feature is shown in orange.
Step 3: Applying notches
Since the Notch check box was selected before the weld defrition was created, the Inersected Components dialog box opens automaticaly
1. Onthe dialog box, click the AutoAdd button. Gussets are automaticaly added to a list on the dialog.
2.Cliek OK.
3.All ether elements were already defined on the Assembly Weld Notch dialog box, so, click OK on that dialog box.
4, The Weld Definition dialog box re-opens, prompting you to create another weld feature. Click Cancel if you don't want to create another
feature
Step
Compare notch geometry to the weld
Examine the notch that was created for the filetype weld. Asin the example below, it you find thatthe notch is not the correct profile for the
‘weld, fllow the instructions inthis section to edit the definition ofthe assembly weld notch.
The notch profile currently intersects the weld,
Tree, let-click the weld noteh definition and select Et Definition from the pop-up menu. The Assembly Weld Notch
1. From the Mo
dialog box opens.
2.On the dialog box, select the Trajectory element, and click Define. The Menu Manager dialog box opens.
3. On the Menu Manager dialag box, click the Select Trajectory option
4. Change the view to Hidden Line. Then, on your model, select the edges ofthe surfaces that touch the weld [in our example, you'd select
the bottom edge of the tube an both sides ofthe gusset
5, Click Done on the Menu Manager dialog box
6, Change the view to Shading, Then, click OK on the Assembly Weld Notch dialog box. The natch profile is new correct and does nat
intersect the weld, as shown below.
ip hwurpt.comicad software bloglips-Wicks-soting-up-afilt-ype-woldwith-nctchsi4n017 Tips & Ticks: Seng Up a Fillt-Type Weldwith aNotch| PTC
The notch definition is now correct and the notch profile does not intersect the weld.
To see an overview of welding Ul and a demonstration of these steps, register for freel Learning Exchange credentials, and then watch this
video [http/flearningexchange ple.com/tuterial/3230/intreduction-to-walding-in-creo-parametric)
To learn more, read the PTC Creo Help Center page, Weld Feature
{ttpshelp.pte.comfcreo,hefereo30_sim_e/usasci/index him\spage/sim/simulate/modstr/connects/reterence/weld_pro-weld.html
Keep Up with PTC Creo!
Interested in more tips and tricks, as well as PIC Creo news, customer stories, and more? Subscribe te PTC Express
{hup:tiwwn pte-comfexpress-newsletterl, our e-newsletter, fr regular updates.
Subscribe to PTC Express e-
Newsletter
Inttpsfenww.pte.comexpress-newsletter
{htp:tiown-pte-comfexpress-newsletter]
Posted in Creo [/blog-categories/pte-creol, Tips and Tricks (/oog-categories/tips-and-tricks)
Quick Links
Creo Ulcad/creo}
Demos and essentials
ip hwurpt.comicad software bloglips-Wicks-soting-up-afilt-ype-woldwith-nctch assi4n017 Tips & Ticks: Seng Up a Fillt-Type Weldwith aNotch| PTC
Events (/events]
Live ang virtual events
Case Studies (/case-studies)
Explore the benefits
Share your thoughts
Write a Comment
comment”
ip hwurpt.comicad software bloglips-Wicks-soting-up-afilt-ype-woldwith-nctch