Documentos de Académico
Documentos de Profesional
Documentos de Cultura
El objetivo de este estudio es evaluar la influencia de los tiempos de lectura del hidrmetro
mecnicas de los suelos y sus mtodos de medicin; evaluando influencia del tipo de suelo
La materia prima utilizada para fabricar las muestras fueron sedimentos de tierra arcillosa
Anlisis granulomtrico - Mtodo del hidrmetro realizada por la Norma NTP 339.128
(ASTM D422-63) y la Gravedad Especifica de los Solidos del Suelo mediante la Norma
Asimismo se desarrollan de forma detallada para que el lector pueda desarrollar el ensayo
hasta lograr el anlisis adecuado de los resultados obtenidos de los mismos, durante la
Se concluy que los suelos obtenidos fueron suelos arenosos y arenosos con cierto
porcentaje de limo dependiendo del tipo de muestra extrada de cada zona, usando criterios
para calificar los suelos con fines urbanos, mostrando que no son aptos para la construccin
The objective of this study is to evaluate the influence of the times of reading the
hydrometer in the determination of soil particle size distribution for the development of
points.
In the present research work dealt with the physical characteristics and mechanical
properties of soils and their measurement methods; evaluating influence of the type of soil
on the module of fineness, weight specific and particle size distribution in soil stabilization;
The raw material used to manufacture samples were sediments of clay containing clay
minerals obtained from the process of clarification of irrigation water from the special
project Chavimochic as main constituent, in the District of Moche, province Trujillo - Peru;
also brought lands of the pits around the school of engineering of materials and samples
from recovery of the Toledo Huaca of the C.A Chan Chan, in the District of Huanchaco
Trujillo, La Libertad.
For the characterization of the samples is proceeded to be based on the standard NTP
339.128 (ASTM D421-58) for particle size analysis, particle size analysis also - test method
of the hydrometer performed by the standard NTP 339.128 (ASTM D422-63) and severity
specifies the solids from soil through the standard NTP 339.131 (ASTM D854-58).
The next project is taken into account research didactics, allowing practice student to
deepen on specific topics in the field of soil mechanics. They also develop in detail so that
the reader can develop the trial to achieve the proper analysis of the results thereof, for the
Concluded that the obtained soil were sandy and sandy soils with certain percentage of silt
depending on the sample extracted from each area, using criteria to qualify the soil for
urban purposes, showing they are not suitable for the construction of foundations currents
in these areas since they do not have resistance, shrinkage and the volumetric stability