Está en la página 1de 2334

ZXUR 9000 GSM

Base Station Controller


Radio Parameter Reference

Version: V6.50.102

ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Revison No. Revision Date Revision Reason

R1.0 2012-12-21 First edition

Serial Number: SJ-20121227135800-015

Publishing Date: 2012-12-21 (R1.0)

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Contents
About This Manual ......................................................................................... I
Chapter 1 Overview .................................................................................... 1-1
1.1 Introduction to BSS Radio Parameters................................................................. 1-1
1.2 The Format to Explain Parameters ...................................................................... 1-2
1.3 Precautions on Parameter Adjustment................................................................. 1-4

Chapter 2 GSM Radio Parameters ............................................................ 2-1


2.1 GSM Logical Configuration(GBssFunction) .......................................................... 2-2
2.1.1 User Label ............................................................................................... 2-2
2.1.2 BSS ID .................................................................................................... 2-3
2.1.3 Managed Object Description ..................................................................... 2-4
2.1.4 BSC Sequence ........................................................................................ 2-5
2.1.5 Load indication allowed ............................................................................ 2-6
2.1.6 Load indication Valid Time ........................................................................ 2-7
2.1.7 Load Indication Period .............................................................................. 2-8
2.1.8 Send assignment failure allowed in outer direct retry procedure .................. 2-9
2.1.9 TFO Enable ........................................................................................... 2-10
2.1.10 Report voice quality .............................................................................. 2-12
2.1.11 R99 Ind ................................................................................................ 2-13
2.1.12 DCS1800/PCS1900 support.................................................................. 2-14
2.1.13 External cell load notify ......................................................................... 2-15
2.1.14 Neighbor cell load valid duration ............................................................ 2-16
2.1.15 Pre-Access Control for IP Transmission ................................................. 2-17
2.1.16 Using load information provided by CRRM ............................................. 2-17
2.1.17 Automatic Resource Indication Threshold .............................................. 2-18
2.1.18 Access class parameter config select .................................................... 2-20
2.1.19 First barred class.................................................................................. 2-21
2.1.20 Barred class windows ........................................................................... 2-22
2.1.21 Barred time step................................................................................... 2-23
2.1.22 Access Control ..................................................................................... 2-24
2.1.23 Paging repeat number .......................................................................... 2-25
2.1.24 Congestion Threshold for Send Load Indication...................................... 2-26
2.1.25 Forbid Handover According to Resource Threshold of Load Indication ..... 2-27
2.1.26 Resource Threshold of Load Indication for Forbid Handover ................... 2-28

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.1.27 Force FACCH....................................................................................... 2-29
2.1.28 Use system message method when MSC over loaded or link blocked...... 2-30
2.1.29 Start system message method for CPU overload.................................... 2-32
2.1.30 Start FUC flow control for CPU overload ................................................ 2-33
2.1.31 The maximum control level for MSC overload or link block ...................... 2-34
2.1.32 Start limit of system message method for CPU overload ......................... 2-35
2.1.33 Start limit of FUC flow control for CPU overload...................................... 2-36
2.1.34 B2 support AMR................................................................................... 2-37
2.1.35 Enable power dynamic sharing.............................................................. 2-38
2.1.36 Power congest delay ............................................................................ 2-39
2.1.37 Time interval of channel power adjustment based on power dynamic
sharing ................................................................................................. 2-40
2.1.38 If paging flow control due to high CPU ................................................... 2-41
2.1.39 CPU threshold of paging flow control ..................................................... 2-42
2.1.40 Radio pre-access procedure switch ....................................................... 2-43
2.1.41 Transport Pre-Access Flag.................................................................... 2-44
2.1.42 The switch of sending Immediate assign message and radio channel
activating synchronously........................................................................ 2-45
2.1.43 FO report for CS................................................................................... 2-46
2.1.44 FO report for PS................................................................................... 2-47
2.1.45 FO report for DBS ................................................................................ 2-48
2.1.46 Inter BSC handover out on SDCCH permitted ........................................ 2-48
2.1.47 The switch of connection and radio channel activating synchronization ..... 2-50
2.1.48 Use BER to average quality .................................................................. 2-51
2.1.49 Check IMSI when access ...................................................................... 2-52
2.1.50 Include BTS power in MR ..................................................................... 2-53
2.1.51 Measurement Result Recording Interval in MSC Invoke Trace................. 2-54
2.1.52 Preprocessed Measurement Result Recording Interval in MSC Invoke
Trace ................................................................................................... 2-55
2.1.53 Enhanced and Preprocessde MR report................................................. 2-56
2.1.54 Preferred speech version for FR ............................................................ 2-57
2.1.55 Preferred speech version for HR ........................................................... 2-58
2.1.56 Dynamic HR support indication.............................................................. 2-59
2.1.57 HR channel fragment finishing support................................................... 2-60
2.1.58 BCCH switch allowed ........................................................................... 2-61
2.1.59 Dynamic configuration SDCCH.............................................................. 2-62
2.1.60 Scan SDCCH ....................................................................................... 2-63
2.1.61 Scan BCCH ......................................................................................... 2-64

II

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.1.62 BCCH starting delay ............................................................................. 2-65
2.1.63 BCCH finishing delay............................................................................ 2-66
2.1.64 TCH->SDCCH limit............................................................................... 2-67
2.1.65 SDCCH->TCH delay............................................................................. 2-68
2.1.66 Minimum Tch reserved for dynamic SDCCH........................................... 2-69
2.1.67

Baseband frequency hopping

TRX exchange support

............................................................................................................ 2-70
2.1.68 The method of intelligent TRX poweroff.................................................. 2-72
2.1.69 IBS shutdown limit ................................................................................ 2-73
2.1.70 IBS powerup limit ................................................................................. 2-73
2.1.71 IBS powerover limit............................................................................... 2-74
2.1.72 IBS power priority ................................................................................. 2-75
2.1.73 BCCH forbidden TS merger time bitmap ................................................ 2-76
2.1.74 The master power control option of intelligent TRX poweroff system ........ 2-77
2.1.75 Baseband resource share support ......................................................... 2-78
2.1.76 TRX Selection priority for baseband share ............................................. 2-79
2.1.77 Number of BA Ranges ......................................................................... 2-80
2.1.78 BA Range Lower ................................................................................. 2-81
2.1.79 BA Range Higher ................................................................................. 2-82
2.1.80 If get Utran classmark information from UE ............................................ 2-83
2.1.81 IPA AMR start mode ............................................................................. 2-84
2.1.82 Send OVERLOAD message to MSC...................................................... 2-85
2.1.83 Use Load of Subcell1 as Load of Cell .................................................... 2-86
2.1.84 Enough MS MR For Connection Failure After Handover.......................... 2-87
2.1.85 Ts Block Alarm Switch .......................................................................... 2-88
2.1.86 BVC Block Alarm Switch ....................................................................... 2-89
2.1.87 AMR full Active Codec Set(4.75kbps) .................................................... 2-90
2.1.88 AMR full Active Codec Set(5.15kbps) .................................................... 2-91
2.1.89 AMR full Active Codec Set(5.9kbps) ...................................................... 2-92
2.1.90 AMR full Active Codec Set(6.7kbps) ...................................................... 2-93
2.1.91 AMR full Active Codec Set(7.4kbps) ...................................................... 2-93
2.1.92 AMR full Active Codec Set(7.95kbps) .................................................... 2-94
2.1.93 AMR full Active Codec Set(10.2kbps) .................................................... 2-95
2.1.94 AMR full Active Codec Set(12.2kbps) .................................................... 2-96
2.1.95 AMR Half Active Codec Set(4.75kbps)................................................... 2-97

III

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.1.96 AMR Half Active Codec Set(5.15kbps)................................................... 2-98
2.1.97 AMR Half Active Codec Set(5.9kbps)..................................................... 2-99
2.1.98 AMR Half Active Codec Set(6.7kbps)....................................................2-100
2.1.99 AMR Half Active Codec Set(7.4kbps)....................................................2-101
2.1.100 Thresholds of AMR FR 1....................................................................2-102
2.1.101 Thresholds of AMR FR 2....................................................................2-103
2.1.102 Thresholds of AMR FR 3....................................................................2-104
2.1.103 Thresholds of AMR FR 4....................................................................2-105
2.1.104 Thresholds of AMR FR 5....................................................................2-107
2.1.105 Thresholds of AMR FR 6....................................................................2-108
2.1.106 Thresholds of AMR FR 7....................................................................2-109
2.1.107 Thresholds of AMR HR 1 ................................................................... 2-110
2.1.108 Thresholds of AMR HR 2 ................................................................... 2-111
2.1.109 Thresholds of AMR HR 3 ................................................................... 2-112
2.1.110 Thresholds of AMR HR 4.................................................................... 2-113
2.1.111 Thresholds of AMR HR 5 .................................................................... 2-114
2.1.112 Hysteresis of AMR FR 1 ..................................................................... 2-115
2.1.113 Hysteresis of AMR FR 2 ..................................................................... 2-117
2.1.114 Hysteresis of AMR FR 3 ..................................................................... 2-118
2.1.115 Hysteresis of AMR FR 4 ..................................................................... 2-119
2.1.116 Hysteresis of AMR FR 5 .....................................................................2-120
2.1.117 Hysteresis of AMR FR 6 .....................................................................2-122
2.1.118 Hysteresis of AMR FR 7 .....................................................................2-123
2.1.119 Hysteresis of AMR HR 1.....................................................................2-124
2.1.120 Hysteresis of AMR HR 2 ....................................................................2-125
2.1.121 Hysteresis of AMR HR 3 ....................................................................2-126
2.1.122 Hysteresis of AMR HR 4 ....................................................................2-128
2.1.123 Hysteresis of AMR HR 5 ....................................................................2-129
2.1.124 Enable AMR FR noise control.............................................................2-130
2.1.125 AMR FR Initial codec mode ................................................................2-131
2.1.126 AMR FR Start mode ..........................................................................2-132
2.1.127 Enable AMR HR noise control ............................................................2-133
2.1.128 AMR HR Initial codec mode ...............................................................2-134
2.1.129 AMR HR Start mode ..........................................................................2-135
2.1.130 Hysteresis of AMRWFS 1...................................................................2-136
2.1.131 Hysteresis of AMRWFS 2...................................................................2-138
2.1.132 Hysteresis of AMRWFS 3...................................................................2-139

IV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.1.133 Hysteresis of AMRWFS 4...................................................................2-140
2.1.134 Hysteresis of AMROWFS 1 ................................................................2-141
2.1.135 Hysteresis of AMROWFS 2 ................................................................2-142
2.1.136 Hysteresis of AMROWHS 1................................................................2-144
2.1.137 Hysteresis of AMROWHS 2................................................................2-145
2.1.138 Thresholds for AMRWFS 1.................................................................2-146
2.1.139 Thresholds for AMRWFS 2.................................................................2-147
2.1.140 Thresholds for AMRWFS 3.................................................................2-148
2.1.141 Thresholds for AMRWFS 4.................................................................2-150
2.1.142 Thresholds for AMROWFS 1 ..............................................................2-151
2.1.143 Thresholds for AMROWFS 2 ..............................................................2-152
2.1.144 Thresholds for AMROWHS 1..............................................................2-153
2.1.145 Thresholds for AMROWHS 2..............................................................2-154
2.1.146 Busy threshold of sub cell ..................................................................2-155
2.1.147 Support of SON Transfer Application ..................................................2-156
2.1.148 Circuit data handover control..............................................................2-157
2.1.149 Cell Bar when A break .......................................................................2-158
2.1.150 VAMOS II prior to pair with non saic UE ..............................................2-159
2.1.151 Send Paging CS on CCCH or not when PS instance exists ..................2-160
2.1.152 If support mute call detect ..................................................................2-162
2.1.153 P value of MUTE SAIC MS capability detection ...................................2-163
2.1.154 N value of SAIC AFC MS capability detection ......................................2-163
2.1.155 N value of MUTE SAIC MS capability detection ...................................2-164
2.1.156 Whether using Frequency List describe channel frequency hopping of
assignment command ..........................................................................2-165
2.1.157 P value of SAIC AFC MS capability detection ......................................2-166
2.2 BSS Function Timer(GBssFunctionTimer) .........................................................2-167
2.2.1 BSS Function Timer ID ..........................................................................2-167
2.2.2 Protective time waiting for access...........................................................2-168
2.2.3 Protection time for link establishment response .......................................2-169
2.2.4 SAPI3 link establishment time ................................................................2-170
2.2.5 Protective time that responses external handover completion
message .............................................................................................2-171
2.2.6 External handover protective time ..........................................................2-173
2.2.7 Protective time for RF channel release ...................................................2-174
2.2.8 Starting time for oriented retry ................................................................2-175
2.2.9 Encryption mode modification time .........................................................2-176
2.2.10 Mode modification process time ...........................................................2-177

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.2.11 Continue timer for mode modify ............................................................2-178
2.2.12 First overload period of flow traffic control .............................................2-179
2.2.13 Second overload period of flow traffic control.........................................2-180
2.2.14 Immediate assignment period...............................................................2-181
2.2.15 Handover period of source cell .............................................................2-182
2.2.16 Assignment period...............................................................................2-184
2.2.17 TCH Channel release period ................................................................2-185
2.2.18 TCH Channel deactivation delay ..........................................................2-186
2.2.19 RLSD message receive protection timer ...............................................2-187
2.2.20 Channel activation protection timer .......................................................2-188
2.2.21 MSC clear command protection timer ...................................................2-189
2.2.22 SCCP connection protection timer ........................................................2-190
2.2.23 Time of micro-micro handover delay .....................................................2-191
2.2.24 TFI and USF release timer ...................................................................2-192
2.2.25 TBF release timer................................................................................2-194
2.2.26 TBF protect time when radio link failure ................................................2-195
2.2.27 Bvc block/unblock retry time.................................................................2-196
2.2.28 Bvc reset retry time..............................................................................2-198
2.2.29 Suspend retry time ..............................................................................2-199
2.2.30 Resume retry time ...............................................................................2-200
2.2.31 Access capability update retry time.......................................................2-202
2.2.32 PFC creating retry time ........................................................................2-203
2.2.33 PFC modifying retry time......................................................................2-204
2.2.34 Supervision Timer of LCS ....................................................................2-205
2.2.35 Radio Timer of LCS .............................................................................2-206
2.2.36 LCS wait intra BSS handover timer.......................................................2-207
2.2.37 PS channel delay release timer ............................................................2-208
2.2.38 Ater wait SCCP connection timer..........................................................2-209
2.2.39 Ater wait resource acknowledge timer...................................................2-210
2.2.40 Ater wait resource timer .......................................................................2-212
2.2.41 Ater wait resource release timer ...........................................................2-213
2.2.42 Ater handover monitor timer .................................................................2-214
2.2.43 HO performed ack timer.......................................................................2-215
2.2.44 RIR Timer ...........................................................................................2-216
2.2.45 RI Timer..............................................................................................2-217
2.2.46 RIAE Timer .........................................................................................2-218
2.2.47 Time to wait A handover request ..........................................................2-219

VI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.2.48 Timer to wait a relocation commit MSG from RNC .................................2-220
2.2.49 Timer of TRAU frame Synchronization ..................................................2-221
2.2.50 Guards the PS handover required procedure ........................................2-222
2.2.51 Guard resource release after sending PS HO command ........................2-223
2.2.52 Time of waiting an internal HO command ..............................................2-224
2.2.53 Round trip delay ..................................................................................2-225
2.2.54 IP Abis Wait Timer ...............................................................................2-227
2.2.55 synchronization timer that ensures source BSS receives both PS and
CS responses ......................................................................................2-228
2.2.56 synchronization timer that ensures target BSS receives both PS and
CS requests ........................................................................................2-229
2.2.57 T3197.................................................................................................2-230
2.2.58 Paging Interval ....................................................................................2-231
2.2.59 2G Load synchronized to 3G Timer.......................................................2-232
2.2.60 2G Cell Radio Resource Synchronization Timer ....................................2-233
2.2.61 Handover protecting timer to WCDMA/FDD...........................................2-234
2.2.62 SubCell PingPong handover timer ........................................................2-235
2.2.63 Time of Cobcch wait for MR report........................................................2-237
2.2.64 SDCCH Channel release period ...........................................................2-238
2.2.65 SDCCH Channel deactivation delay .....................................................2-239
2.2.66 Mute call detect timer...........................................................................2-239
2.3 BSS Function Handover Control(GBssHandoverControl) ...................................2-240
2.3.1 BSC Handover Control ID ......................................................................2-240
2.3.2 Handover synchronization indication support...........................................2-241
2.3.3 Internal redirection enable......................................................................2-242
2.3.4 Outer redirection enable ........................................................................2-244
2.3.5 BSC intracell handover enable ...............................................................2-245
2.3.6 SDCCH handover enable.......................................................................2-246
2.3.7 Handover request response ...................................................................2-246
2.3.8 Old BSS to new BSS information............................................................2-248
2.3.9 Queuing indicator in handover required message ....................................2-249
2.3.10 A+B solution for TD handover enabled..................................................2-250
2.3.11 Pingpong handover duration.................................................................2-251
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch........2-252
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On Tch............2-253
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Sdcch..................................................................................................2-254

VII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Tch......................................................................................................2-255
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Sdcch ............................................................................................2-256
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Tch ................................................................................................2-257
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Sdcch..................................................................................................2-258
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Tch......................................................................................................2-259
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Sdcch..................................................................................................2-260
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Tch......................................................................................................2-261
2.3.22 BSC Internal Handover Parameter of IPA..............................................2-262
2.3.23 Handover between cells of different net support ....................................2-263
2.3.24 the policy of choosing speech version in 3GPP IPA BSC handover .........2-264
2.4 eMLPP Configuration(GBssEmlpp)...................................................................2-265
2.4.1 eMLPP ID .............................................................................................2-265
2.4.2 Queue indicate when assign ..................................................................2-266
2.4.3 Queue allowed when handover ..............................................................2-267
2.4.4 Forced handover indication for assign.....................................................2-268
2.4.5 Forced handover indication for handover ................................................2-269
2.4.6 Forced release indicate when assign ......................................................2-270
2.4.7 Forced release allowed when handover ..................................................2-272
2.4.8 Wait resource timer after forced handover (ForceHoWait, 100ms) ............2-273
2.4.9 Wait resource timer after forced release..................................................2-274
2.4.10 Enough low priority for preemption........................................................2-275
2.4.11 Enough call duration for preemption......................................................2-276
2.4.12 Forced handover target penalty time.....................................................2-277
2.4.13 Priority of emergency service ...............................................................2-278
2.4.14 User priority threshold for EMLPP.........................................................2-279
2.4.15 Reserved channel first .........................................................................2-280
2.4.16 Support EMLPP(SupportEMLPP) .........................................................2-281
2.4.17 EMLPP channel reserved rate..............................................................2-282
2.5 eMLPP User Priority Configuration(GEmlppUserPriority)....................................2-283
2.5.1 eMLPP User Priority Configuration ID .....................................................2-283
2.5.2 User priority ..........................................................................................2-284
2.5.3 Strategy for preemption when assign ......................................................2-285

VIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.5.4 Strategy for preemption when handover..................................................2-286
2.5.5 Max forced handover times when assign ................................................2-288
2.5.6 Max forced handover times when handover ............................................2-289
2.5.7 Max forced release times when assign ...................................................2-290
2.5.8 Max forced release times when handover ...............................................2-291
2.5.9 Preemption duration when assign...........................................................2-292
2.5.10 Preemption duration when handover.....................................................2-293
2.5.11 Timer for start forced release when assign ............................................2-294
2.5.12 Timer for start forced release when handover ........................................2-295
2.5.13 Interval for search forced handover target when assign..........................2-296
2.5.14 Interval for search forced handover target when handover .....................2-298
2.5.15 Interval for search forced release target when assign.............................2-299
2.5.16 Interval for search forced release target when handover ........................2-300
2.5.17 Queue timer for assign.........................................................................2-301
2.5.18 Queue timer for handover ....................................................................2-302
2.6 BSS Function PS(GBssFunctionPS).................................................................2-303
2.6.1 BSC PS ID............................................................................................2-303
2.6.2 Bvc flow control period...........................................................................2-304
2.6.3 MS flow control period ...........................................................................2-305
2.6.4 Max times of radio access capabilities update retry .................................2-306
2.6.5 Max times of PFC create retry ................................................................2-308
2.6.6 Max times of PFC modify retry ...............................................................2-309
2.6.7 Max times of Bvc block retry ..................................................................2-310
2.6.8 Max times of Bvc unblock retry............................................................... 2-311
2.6.9 MAX times of Bvc reset retry ..................................................................2-312
2.6.10 Max times of suspend retry ..................................................................2-314
2.6.11 Max times of resume retry ....................................................................2-315
2.6.12 Max allowed number of continous losses of uplink data
blocks(N3101) .....................................................................................2-316
2.6.13 Times of packet uplink ACK/NACK retries(N3103) .................................2-317
2.6.14 Max allowed number of continuous losses of uplink RLC/MAC control
message(N3105) .................................................................................2-319
2.6.15 Bvc flow control support .......................................................................2-320
2.6.16 MS flow control support .......................................................................2-321
2.6.17 Bvc flow control R MIN value................................................................2-322
2.6.18 MS flow control R MIN value ................................................................2-324
2.6.19 Flow control mode ...............................................................................2-325
2.6.20 PFC support........................................................................................2-326

IX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.6.21 Net operation mode .............................................................................2-327
2.6.22 Page coordination support ...................................................................2-328
2.6.23 NACC support.....................................................................................2-330
2.6.24 LLC Transfer for SAPI0(Reserved) .......................................................2-331
2.6.25 LLC Transfer for SAPI1(LLGMM)..........................................................2-332
2.6.26 LLC Transfer for SAPI2(TOM2) ............................................................2-333
2.6.27 LLC Transfer for SAPI3(User-Data) ......................................................2-334
2.6.28 LLC Transfer for SAPI4(Reserved) .......................................................2-336
2.6.29 LLC Transfer for SAPI5(User-Data) ......................................................2-337
2.6.30 LLC Transfer for SAPI6(Reserved) .......................................................2-338
2.6.31 LLC Transfer for SAPI7(LLSMS)...........................................................2-339
2.6.32 LLC Transfer for SAPI8(TOM8) ............................................................2-340
2.6.33 LLC Transfer for SAPI9(User-Data) ......................................................2-341
2.6.34 LLC Transfer for SAPI10(Reserved) .....................................................2-343
2.6.35 LLC Transfer for SAPI11(User-Data).....................................................2-344
2.6.36 LLC Transfer for SAPI12(Reserved) .....................................................2-345
2.6.37 LLC Transfer for SAPI13(Reserved) .....................................................2-346
2.6.38 LLC Transfer for SAPI14(Reserved) .....................................................2-347
2.6.39 LLC Transfer for SAPI15(Reserved) .....................................................2-348
2.6.40 RIM support ........................................................................................2-350
2.6.41 RIM retry times....................................................................................2-351
2.6.42 TBF establish support ..........................................................................2-352
2.6.43 Signal extended uplink TBF support .....................................................2-353
2.6.44 Highest coding scheme of POC service in GPRS ..................................2-354
2.6.45 Highest coding scheme of POC service in EGPRS ................................2-355
2.6.46 Highest coding scheme of signal TBF ...................................................2-356
2.6.47 Support of enhanced radio status procedures........................................2-358
2.6.48 Support of PFC flow control procedures ................................................2-359
2.6.49 PS handover support ...........................................................................2-360
2.6.50 Max of sending PS handover required ..................................................2-361
2.6.51

Enable PS Handover Indications in Inter-BSS

handover

...........................................................................................................2-362
2.6.52 Request SI/PSI ...................................................................................2-363
2.6.53 Service UTRAN CCO support ..............................................................2-364
2.6.54 FANR in TBF support...........................................................................2-365

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.6.55 DLDC support .....................................................................................2-366
2.6.56 RTTI support .......................................................................................2-367
2.6.57 EGPRS2-A support .............................................................................2-369
2.6.58 EGPRS prior to GPRS Support ............................................................2-370
2.6.59 Allocating weights of EGPRS ...............................................................2-371
2.6.60 Choose PS route by NSVC ..................................................................2-372
2.6.61 Enable PS Uplink Power Control In Establishment Phase ......................2-373
2.6.62 DTM Enhance Capability .....................................................................2-374
2.6.63 Enable PCU resource alarm.................................................................2-375
2.6.64 E-UTRAN CCN support .......................................................................2-376
2.6.65 DTM Handover Support .......................................................................2-377
2.6.66 Continue with CS HO While PS HO is failure in DTM HO .......................2-378
2.6.67 Send suspend message when GPRS suspension .................................2-379
2.6.68 Send by SNDCP indicator ....................................................................2-380
2.6.69 TCP/IP performance enhance ..............................................................2-381
2.6.70 IP Segment Optimization .....................................................................2-382
2.6.71 Support resource optimizing by service .................................................2-383
2.6.72 Identify of special service .....................................................................2-384
2.6.73 Extended uplink dynamic allocation support ..........................................2-385
2.6.74 Resource pool for PS rate ....................................................................2-386
2.6.75 Max users of POC service on shared PS channel uplink ........................2-387
2.6.76 Max users of POC service on shared PS channel downlink ....................2-388
2.6.77 Optimized POC service support............................................................2-389
2.6.78 IP abis pool bandwidth restore support .................................................2-390
2.6.79 Max LLC num that per bssgp may save ................................................2-391
2.6.80 Max LLC num that per bssgp may transfer ............................................2-393
2.6.81 RRM threshold ....................................................................................2-394
2.6.82 Parameter of Flow control mode 1 ........................................................2-395
2.6.83 Parameter of Flow control mode 2 ........................................................2-396
2.6.84 Coefficient of Bvc bucket size...............................................................2-397
2.6.85 Coefficient of MS bucket ......................................................................2-398
2.6.86 Enable implicit reject with paging ..........................................................2-399
2.6.87 Implicit reject CS and PS with paging....................................................2-400
2.6.88 PS service Bar when Gb break.............................................................2-401
2.7 Common Measure and Information Exchange(GCommMeas) ............................2-402
2.7.1 Common Measure and Information Exchange ID.....................................2-402
2.7.2 Report characteristics ............................................................................2-403

XI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.7.3 Measurement Load Threshold 1 .............................................................2-404
2.7.4 Measurement RT Load Threshold 1........................................................2-405
2.7.5 Measurement NRT Load Threshold 1 .....................................................2-406
2.7.6 Measurement Load Threshold 2 .............................................................2-407
2.7.7 Measurement RT Load Threshold 2........................................................2-408
2.7.8 Measurement NRT Load Threshold 2 .....................................................2-409
2.7.9 Report periodicity unit ............................................................................2-410
2.7.10 Report Periodicity Value....................................................................... 2-411
2.7.11 Measurement Hysteresis Time .............................................................2-412
2.7.12 Event Report Periodicity.......................................................................2-413
2.7.13 Information Report Type.......................................................................2-414
2.7.14 Measurement type...............................................................................2-415
2.7.15 Support of 2g request Iur-g ..................................................................2-416
2.7.16 Not Real Time Load Overflow Threshold ...............................................2-417
2.7.17 Not Real Time Load High Threshold .....................................................2-418
2.7.18 Not Real Time Load Low Threshold ......................................................2-419
2.8 BSC Precise Paging Configuration(GBssPrecisePaging) ...................................2-421
2.8.1 BSC Precise Paging Configuration ID .....................................................2-421
2.8.2 Support Precise Paging .........................................................................2-422
2.8.3 Use HPC for Precise Paging ..................................................................2-423
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service ................2-424
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service ................2-425
2.8.6 Allow Exceed area Precise Paging for Circuit Switched Service ...............2-426
2.8.7 Allow Exceed area Precise Paging for Packet Switched Service...............2-427
2.8.8 Paging Repeat Time for Circuit Switched Service ....................................2-428
2.8.9 Paging Repeat Time for Packet Switched Service ...................................2-429
2.9 BSC Reserved Configuration(GBssFunctionRsv) ..............................................2-430
2.9.1 BSC Reserved Configuration ID .............................................................2-430
2.9.2 Global Reserved Parameter 1 ................................................................2-431
2.9.3 Global Reserved Parameter 2 ................................................................2-432
2.9.4 Global Reserved Parameter 3 ................................................................2-432
2.9.5 Global Reserved Parameter 4 ................................................................2-433
2.9.6 Global Reserved Parameter 5 ................................................................2-434
2.9.7 Global Reserved Parameter 6 ................................................................2-435
2.9.8 Global Reserved Parameter 7 ................................................................2-436
2.9.9 Global Reserved Parameter 8 ................................................................2-437
2.9.10 Global Reserved Parameter 9 ..............................................................2-438

XII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.9.11 Global Reserved Parameter 10.............................................................2-439
2.9.12 Global Reserved Parameter 11.............................................................2-440
2.9.13 Global Reserved Parameter 12 ............................................................2-440
2.9.14 Global Reserved Parameter 13 ............................................................2-441
2.9.15 Global Reserved Parameter 14 ............................................................2-442
2.9.16 Global Reserved Parameter 15 ............................................................2-443
2.9.17 Global Reserved Parameter 16 ............................................................2-444
2.9.18 Global Reserved Parameter 17 ............................................................2-445
2.9.19 Global Reserved Parameter 18 ............................................................2-446
2.9.20 Global Reserved Parameter 19 ............................................................2-447
2.9.21 Global Reserved Parameter 20 ............................................................2-448
2.10 External GSM Cell Configuration(GExternalGsmCell) ......................................2-449
2.10.1 External GSM Cell ID...........................................................................2-449
2.10.2 Cell Identity .........................................................................................2-450
2.10.3 BCCH arfcn ........................................................................................2-450
2.10.4 NCC ...................................................................................................2-451
2.10.5 BCC ...................................................................................................2-452
2.10.6 LAC (LAC) ..........................................................................................2-453
2.10.7 MCC...................................................................................................2-454
2.10.8 MNC...................................................................................................2-455
2.10.9 FreqBand............................................................................................2-456
2.10.10 Cell type ...........................................................................................2-457
2.10.11 GPRS service support........................................................................2-458
2.10.12 Allow SOLSA MS to access ...............................................................2-459
2.10.13 LSA ID ..............................................................................................2-460
2.10.14 RAC (RAC) .......................................................................................2-461
2.10.15 Cell bar access 2 ...............................................................................2-463
2.10.16 GPRS access minimal signal level in idle ............................................2-465
2.10.17 GPRS MAX initial access signal level in idle ........................................2-466
2.10.18 Cell reselection offset in idle ...............................................................2-467
2.10.19 Cell reselection temporary offset in idle ...............................................2-469
2.10.20 Penalty time of cell reselection in idle..................................................2-470
2.10.21 HSC exist in idle ................................................................................2-471
2.10.22 Threshold of HSC signal level in idle ...................................................2-472
2.10.23 HCS priority in idle.............................................................................2-473
2.10.24 GPRS access minimal signal level in transfer ......................................2-474
2.10.25 GPRS MAX initial access signal level in transfer ..................................2-476

XIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.10.26 Cell reselection offset in transfer .........................................................2-477
2.10.27 Cell reselection temporary offset in transfer .........................................2-478
2.10.28 Penalty time of cell reselection in transfer............................................2-480
2.10.29 HSC exist in transfer ..........................................................................2-481
2.10.30 Threshold of HSC signal level in transfer.............................................2-482
2.10.31 HCS priority in transfer.......................................................................2-483
2.10.32 MAX power level of MS......................................................................2-484
2.10.33 RemoteSp DN ...................................................................................2-486
2.10.34 Um soft Synchronous Support ............................................................2-486
2.11 External UTRAN FDD Cell Configuration(GExternalUtranCellFDD) ...................2-487
2.11.1 External UTRAN FDD Cell ID ...............................................................2-487
2.11.2 CI .......................................................................................................2-488
2.11.3 MCC ...................................................................................................2-489
2.11.4 MNC ...................................................................................................2-490
2.11.5 RNC ID ...............................................................................................2-491
2.11.6 LAC (LAC) ..........................................................................................2-492
2.11.7 UTRAN cell frequency..........................................................................2-493
2.11.8 Scrambling code..................................................................................2-494
2.11.9 TX diversity indication ..........................................................................2-495
2.11.10 RAC (RAC) .......................................................................................2-496
2.11.11 Whether an external 3G cell is included in GSM system. ......................2-497
2.12 External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr) ..............2-498
2.12.1 External UTRAN TDD Cell ID ...............................................................2-498
2.12.2 CI .......................................................................................................2-499
2.12.3 MCC...................................................................................................2-500
2.12.4 MNC...................................................................................................2-501
2.12.5 RNC ID...............................................................................................2-502
2.12.6 LAC (LAC) ..........................................................................................2-503
2.12.7 UTRAN cell frequency .........................................................................2-504
2.12.8 UTRAN TDD cell parameter .................................................................2-505
2.12.9 TX diversity indication ..........................................................................2-506
2.12.10 RAC (RAC) .......................................................................................2-506
2.12.11 UTRAN adjacent cell bandwidth..........................................................2-508
2.12.12 Apply Sync Case / Apply TSTD ..........................................................2-509
2.12.13

Whether an external 3G cell is included in

GSM system.

XIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


...........................................................................................................2-510
2.13 External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD).............. 2-511
2.13.1 External E-UTRAN FDD Cell Configuration ID ....................................... 2-511
2.13.2 MCC...................................................................................................2-512
2.13.3 MNC...................................................................................................2-512
2.13.4 EUTRAN NODEB Identification ............................................................2-513
2.13.5 Physical layer cell identity of LTE CELL.................................................2-514
2.13.6 specified EARFCN of E-UTRAN cells ...................................................2-515
2.13.7 Tracking area code ..............................................................................2-516
2.13.8 The attribute of LTE NodeB ..................................................................2-517
2.13.9 the minimum value of the channel bandwidth ........................................2-518
2.13.10 EUTRAN CELL Identification..............................................................2-519
2.14 External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)...............2-520
2.14.1 External UTRAN FDD Cell CRRM ID ....................................................2-520
2.14.2 Cs Remained User Num Low Threshold ...............................................2-521
2.14.3 Ps Remained User Num Low Threshold................................................2-522
2.14.4 Cs Remained User Num Medium Threshold..........................................2-523
2.14.5 Ps Remained User Num Medium Threshold..........................................2-524
2.14.6 Uplink Load Low Threshold ..................................................................2-525
2.14.7 Uplink Load Medium Threshold ............................................................2-526
2.14.8 Uplink Load High Threshold .................................................................2-527
2.14.9 Downlink Load Low Threshold..............................................................2-528
2.14.10 Downlink Load Medium Threshold ......................................................2-529
2.14.11 Downlink Load High Threshold ...........................................................2-530
2.14.12 Real Time Uplink Load Low Threshold ................................................2-531
2.14.13 Real Time Uplink Load Medium Threshold ..........................................2-532
2.14.14 Real Time Uplink Load High Threshold ...............................................2-533
2.14.15 Real Time Downlink Load Low Threshold............................................2-534
2.14.16 Real Time Downlink Load Medium Threshold ......................................2-535
2.14.17 Real Time Downlink Load High Threshold ...........................................2-536
2.14.18 Not Real Time Uplink Load Low Threshold ..........................................2-537
2.14.19 Not Real Time Uplink Load Medium Threshold ....................................2-538
2.14.20 Not Real Time Uplink Load High Threshold .........................................2-539
2.14.21 Not Real Time Downlink Load Low Threshold......................................2-540
2.14.22 Not Real Time Downlink Load Medium Threshold ................................2-541
2.14.23 Not Real Time Downlink Load High Threshold .....................................2-542
2.15 External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr) ..........2-543

XV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.15.1 External UTRAN TDD Cell CRRM ID ....................................................2-543
2.15.2 Cs Remained User Num Low Threshold ...............................................2-544
2.15.3 Ps Remained User Num Low Threshold................................................2-545
2.15.4 Cs Remained User Num Medium Threshold..........................................2-546
2.15.5 Ps Remained User Num Medium Threshold..........................................2-547
2.15.6 Uplink Load Low Threshold ..................................................................2-548
2.15.7 Uplink Load Medium Threshold ............................................................2-549
2.15.8 Uplink Load High Threshold .................................................................2-550
2.15.9 Downlink Load Low Threshold..............................................................2-551
2.15.10 Downlink Load Medium Threshold ......................................................2-552
2.15.11 Downlink Load High Threshold ...........................................................2-553
2.15.12 Real Time Uplink Load Low Threshold ................................................2-554
2.15.13 Real Time Uplink Load Medium Threshold ..........................................2-555
2.15.14 Real Time Uplink Load High Threshold ...............................................2-556
2.15.15 Real Time Downlink Load Low Threshold............................................2-557
2.15.16 Real Time Downlink Load Medium Threshold ......................................2-558
2.15.17 Real Time Downlink Load High Threshold ...........................................2-559
2.15.18 Not Real Time Uplink Load Low Threshold ..........................................2-560
2.15.19 Not Real Time Uplink Load Medium Threshold ....................................2-561
2.15.20 Not Real Time Uplink Load High Threshold .........................................2-562
2.15.21 Not Real Time Downlink Load Low Threshold......................................2-563
2.15.22 Not Real Time Downlink Load Medium Threshold ................................2-564
2.15.23 Not Real Time Downlink Load High Threshold .....................................2-565
2.16 External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)..............2-566
2.16.1 External E-UTRAN TDD Cell Configuration ID .......................................2-566
2.16.2 MCC...................................................................................................2-567
2.16.3 MNC...................................................................................................2-568
2.16.4 EUTRAN NODEB Identification ............................................................2-569
2.16.5 Physical layer cell identity of LTE CELL.................................................2-570
2.16.6 specified EARFCN of E-UTRAN cells ...................................................2-571
2.16.7 Tracking area code ..............................................................................2-572
2.16.8 The attribute of LTE NodeB ..................................................................2-573
2.16.9 the minimum value of the channel bandwidth ........................................2-574
2.16.10 EUTRAN CELL Identification..............................................................2-575
2.17 GSM Cell Configuration(GGsmCell)................................................................2-576
2.17.1 GSM Cell Configuration ID ...................................................................2-576
2.17.2 CI .......................................................................................................2-577

XVI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.17.3 NCC ...................................................................................................2-577
2.17.4 BCC ...................................................................................................2-578
2.17.5 TSC....................................................................................................2-580
2.17.6 MIN received signal level to access ......................................................2-581
2.17.7 Control channel MAX power level .........................................................2-582
2.17.8 NCC permitted ....................................................................................2-584
2.17.9 GPLMN DN.........................................................................................2-585
2.17.10 LocationArea DN ...............................................................................2-586
2.17.11 Cell Sequence ...................................................................................2-587
2.17.12 BCCH arfcn.......................................................................................2-588
2.17.13 Common control channel configuration ...............................................2-588
2.17.14 PS Support .......................................................................................2-590
2.17.15 GRoutingArea DN..............................................................................2-591
2.17.16 Number of blocks reserved for AGCH .................................................2-592
2.17.17 Number of multi-frames of the PCH ....................................................2-593
2.17.18 Early class-mark sending control ........................................................2-595
2.17.19 CBC support .....................................................................................2-596
2.17.20 FreqBand..........................................................................................2-597
2.17.21 Cell type ...........................................................................................2-598
2.17.22 MAX number of re-transmitting events times .......................................2-599
2.17.23 Number of slots to spread transmission...............................................2-601
2.17.24 Cell bar qualify ..................................................................................2-602
2.17.25 Cell bar access..................................................................................2-604
2.17.26 Call re-establishment allowed .............................................................2-605
2.17.27 Emergency call allowed .....................................................................2-606
2.17.28 Access Control ..................................................................................2-607
2.17.29 Uplink discontinuous transmission ......................................................2-608
2.17.30 Protection period for access attempt ...................................................2-610
2.17.31 Multi-band report indication ................................................................ 2-611
2.17.32 Redirection enable.............................................................................2-613
2.17.33 Outer redirection enable.....................................................................2-614
2.17.34 Downlink discontinuous transmission allowed......................................2-615
2.17.35 SI13 sending position.........................................................................2-616
2.17.36 Queue allowed when assign...............................................................2-617
2.17.37 Forced release indicate when assign ..................................................2-619
2.17.38 Forced handover indication for assign.................................................2-620
2.17.39 Queue allowed when handover ..........................................................2-621

XVII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.17.40 Forced release indicate when handover ..............................................2-622
2.17.41 Forced handover indication for handover.............................................2-623
2.17.42 Cipher mode priority 1........................................................................2-625
2.17.43 Cipher mode priority 2........................................................................2-626
2.17.44 Cipher mode priority 3........................................................................2-627
2.17.45 Cipher mode priority 4........................................................................2-628
2.17.46 Cipher mode priority 5........................................................................2-629
2.17.47 Cipher mode priority 6........................................................................2-631
2.17.48 Cipher mode priority 7........................................................................2-632
2.17.49 Preprocessing indication ....................................................................2-633
2.17.50 Fast average indication ......................................................................2-635
2.17.51 Allowed FACCH call setup after emergency call...................................2-636
2.17.52 Allowed FACCH call setup when page respond ...................................2-637
2.17.53 Allowed call setup on FACCH .............................................................2-638
2.17.54 Allowed call reestablished on FACCH .................................................2-639
2.17.55 Minimal resource threshold ................................................................2-640
2.17.56 PCH load indication period .................................................................2-641
2.17.57 CCCH load indication (RACH) ............................................................2-642
2.17.58 CCCH load indication (PCH) ..............................................................2-643
2.17.59 Interference average period ...............................................................2-644
2.17.60 Interference Band Boundary...............................................................2-645
2.17.61 MAX resending times for physical information......................................2-646
2.17.62 RACH load indication period...............................................................2-647
2.17.63 Average bursts count surveyed by RACH............................................2-648
2.17.64 RACH receiving signal level threshold for busy burst............................2-649
2.17.65 Times of N200 for SDCCH .................................................................2-650
2.17.66 Times of N200 for FACCH_F ..............................................................2-651
2.17.67 Times of N200 for FACCH_H..............................................................2-652
2.17.68 Times of N200 for SACCH .................................................................2-653
2.17.69 Times of N200 for establish ................................................................2-654
2.17.70 Times of N200 for Release .................................................................2-655
2.17.71 Interval of SDCCH re-sending PHY info message................................2-656
2.17.72 Interval of TCH re-sending PHY info message.....................................2-657
2.17.73 TA Max .............................................................................................2-659
2.17.74 TA allowed ........................................................................................2-660
2.17.75 Allow SOLSA MS to access ...............................................................2-661
2.17.76 Repeated ACCH support....................................................................2-662

XVIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.17.77 Frequency offset correct support ........................................................2-663
2.17.78 Maximum power on handover command support .................................2-664
2.17.79 Coefficient of Bvc bucket size .............................................................2-665
2.17.80 TA MIN .............................................................................................2-666
2.17.81 8PSK modulating power attenuation level ...........................................2-667
2.17.82 Access class parameter config select..................................................2-668
2.17.83 Cell access control support ................................................................2-669
2.17.84 Support NCell of Channel Release .....................................................2-670
2.17.85 Strategy for E-Utran Neighbour Select When Release .........................2-671
2.17.86 E-Utran FDD and TDD Prio When Release .........................................2-672
2.17.87 Support Emergency call preemption ...................................................2-673
2.17.88 BA show ...........................................................................................2-675
2.17.89 Support CS paging prefer PS Assignment ...........................................2-676
2.17.90 Channel Select Strategy ....................................................................2-677
2.17.91 EMLPP channel reserved rate ............................................................2-678
2.17.92 Use cell EMLPP Threshold.................................................................2-679
2.17.93 Dynamic HR support indication...........................................................2-680
2.17.94 Threshold of AMR HR........................................................................2-681
2.17.95 Threshold for FR to HR ......................................................................2-682
2.17.96 Dynamic HR channel allocation algorithm ...........................................2-683
2.17.97 HR channel fragment finishing support................................................2-685
2.17.98 Busy threshold for HR defrag .............................................................2-686
2.17.99 Idle FR threshold For HR defrag .........................................................2-687
2.17.100 HR channel percentage threshold .....................................................2-688
2.17.101 If support allocating channel by TA....................................................2-689
2.17.102 The TA threshold of allocating channel in BCCH ................................2-690
2.17.103 Support dynamic channel move ........................................................2-691
2.17.104 Idle static TCH threshold for dynamic channel move ..........................2-692
2.17.105 UpLink Optimize Method for Assignment or Intracell Handover ...........2-693
2.17.106 DownLink Optimize Method for Assignment or Intracell Handover.......2-694
2.17.107 UpLink Optimize Method for Intercell Handover .................................2-695
2.17.108 DownLink Optimize Method for Intercell Handover .............................2-696
2.17.109 UpLink Optimize Method for Immediate Assignment ..........................2-697
2.17.110 DownLink Optimize Method for Immediate Assignment ......................2-698
2.17.111 Uplink target level.............................................................................2-699
2.17.112 Downlink target level ........................................................................2-700
2.17.113 Low RSSI threshold .........................................................................2-701

XIX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.17.114 High RSSI Threshold .......................................................................2-703
2.17.115 Ms power inherit threshold................................................................2-704
2.17.116 Additional reselection parameter indication(SI4).................................2-705
2.17.117 Cell reselection parameter indication .................................................2-706
2.17.118 Cell reselection offset .......................................................................2-708
2.17.119 Temporary offset ..............................................................................2-709
2.17.120 Penalty time .................................................................................... 2-711
2.17.121 Cell reselecting hysteresis level ........................................................2-712
2.17.122 New setup cause indication ..............................................................2-713
2.17.123 Power offset indication .....................................................................2-714
2.17.124 Power offset ....................................................................................2-716
2.17.125 Priority threshold..............................................................................2-717
2.17.126 LSA Offset ......................................................................................2-718
2.17.127 Additional reselection parameter indicator(SI3) ..................................2-718
2.17.128 MAX value of MS Radio link timeout .................................................2-720
2.17.129 Radio link failure criterion .................................................................2-721
2.17.130 MAX value of BSS Radio link timeout................................................2-722
2.17.131 Receiving level threshold..................................................................2-724
2.17.132 Receiving quality threshold...............................................................2-725
2.17.133 Radio link failure checking period......................................................2-726
2.17.134 BCCH switch allowed.......................................................................2-727
2.17.135 Dynamic configuration SDCCH.........................................................2-728
2.17.136 Baseband frequency hopping TRX exchange support ........................2-729
2.17.137 Start PA power off............................................................................2-730
2.17.138 Switch flag of cell TRX power off.......................................................2-731
2.17.139 Start PA output voltage tuning...........................................................2-732
2.17.140 Enable RRU of cell power off............................................................2-733
2.17.141 The switch of CIR report...................................................................2-734
2.17.142 The L2 frame of Lapdm fill random value...........................................2-735
2.17.143 MR Report Time Bmp ......................................................................2-736
2.17.144 Support intelligent cell shutting down ................................................2-737
2.17.145 Upper GGsmCell DN .......................................................................2-738
2.17.146 Mobile Originated Short Message Intercept .......................................2-739
2.17.147 Mobile Terminated Short Message Intercept ......................................2-740
2.17.148 Diversity Combine Mode ..................................................................2-741
2.17.149 Joint Source-Controlled Channel Decoding Switch.............................2-742
2.17.150 Joint Source-Controlled Channel Decoding .......................................2-743

XX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.17.151 IBS time bitmap ...............................................................................2-744
2.17.152 Cell shuttingdown based on traffic load .............................................2-745
2.17.153 Support implicit reject in assignment .................................................2-746
2.17.154 Implicit reject CS and PS..................................................................2-747
2.17.155 Support broadcasting EAB ...............................................................2-748
2.17.156 EAB Subcategory ............................................................................2-749
2.17.157 EAB Authorization Mask...................................................................2-750
2.17.158 EAB Position ...................................................................................2-751
2.17.159 NCC Config Parameter ....................................................................2-752
2.17.160 RxQual Threshlod............................................................................2-753
2.17.161 TCH Allocation Threshold For Dual-Frequency Network .....................2-754
2.17.162 Um soft Synchronous Support ..........................................................2-755
2.17.163 Is Enhanced Dual-Frequency Network Support..................................2-756
2.17.164 SubCell Channel Allocation Control...................................................2-757
2.17.165 Use Uniform Power Control .............................................................2-758
2.17.166 Longitude ........................................................................................2-759
2.17.167 Latitude...........................................................................................2-760
2.17.168 Altitude ...........................................................................................2-761
2.17.169 Offset Angle ....................................................................................2-762
2.17.170 Site location ....................................................................................2-763
2.17.171 Immediate assignment maximum delay times ...................................2-764
2.17.172 Filter Exceed Traffic threshold NCell .................................................2-765
2.17.173 Emergency Handover use Dynamic Priority .......................................2-765
2.17.174 Assign strategy for Cobcch...............................................................2-766
2.17.175 Arf power reduce function switch ......................................................2-768
2.17.176 SupportBtsBcchExchg .....................................................................2-769
2.17.177 Stop power Reduce Level Threshold.................................................2-770
2.17.178 Reduce Power Step .........................................................................2-771
2.17.179 Reduce Power Arfcn ........................................................................2-771
2.17.180 Prom power step .............................................................................2-772
2.17.181 Non Emergency Handover use Dynamic Priority................................2-773
2.17.182 Immediate assignment occupy PCH option........................................2-774
2.18 Cell Precise Paging Configuration(GCellPrecisePaging) ..................................2-775
2.18.1 Cell Precise Paging Configuration ID ....................................................2-775
2.18.2 Adopt Precise Paging for Circuit Switched Service.................................2-776
2.18.3 Adopt Precise Paging for Packet Switched Service................................2-777
2.18.4 VPC Age Time ....................................................................................2-778

XXI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.18.5 Paging Hole Timer...............................................................................2-779
2.19 Location Area(GLocationArea) .......................................................................2-780
2.19.1 Location Area ID .................................................................................2-780
2.19.2 LAC....................................................................................................2-781
2.19.3 IMSI attach/detach allowed ..................................................................2-782
2.19.4 Periodical location updating timer .........................................................2-783
2.20 Routing Area(GRoutingArea) .........................................................................2-785
2.20.1 Routing Area ID...................................................................................2-785
2.20.2 RAC ...................................................................................................2-785
2.21 AMR Configuration(GCellAmr) .......................................................................2-787
2.21.1 AMR Configuration ID ..........................................................................2-787
2.21.2 Support AMR Codec............................................................................2-788
2.21.3 Use cell AMR parameter ......................................................................2-788
2.21.4 AMR full Active Codec Set(4.75kbps) ...................................................2-789
2.21.5 AMR full Active Codec Set(5.15kbps) ...................................................2-790
2.21.6 AMR full Active Codec Set(5.9kbps) .....................................................2-791
2.21.7 AMR full Active Codec Set(6.7kbps) .....................................................2-792
2.21.8 AMR full Active Codec Set(7.4kbps) .....................................................2-793
2.21.9 AMR full Active Codec Set(7.95kbps) ...................................................2-794
2.21.10 AMR full Active Codec Set(10.2kbps)..................................................2-795
2.21.11 AMR full Active Codec Set(12.2kbps)..................................................2-796
2.21.12 AMR Half Active Codec Set(4.75kbps) ................................................2-797
2.21.13 AMR Half Active Codec Set(5.15kbps) ................................................2-798
2.21.14 AMR Half Active Codec Set(5.9kbps)..................................................2-799
2.21.15 AMR Half Active Codec Set(6.7kbps)..................................................2-800
2.21.16 AMR Half Active Codec Set(7.4kbps)..................................................2-801
2.21.17 AMR Half Active Codec Set(7.95kbps) ................................................2-802
2.21.18 Thresholds of AMR FR 1....................................................................2-802
2.21.19 Thresholds of AMR FR 2....................................................................2-804
2.21.20 Thresholds of AMR FR 3....................................................................2-805
2.21.21 Thresholds of AMR FR 4....................................................................2-806
2.21.22 Thresholds of AMR FR 5....................................................................2-807
2.21.23 Thresholds of AMR FR 6....................................................................2-808
2.21.24 Thresholds of AMR FR 7....................................................................2-810
2.21.25 Thresholds of AMR HR 1 ................................................................... 2-811
2.21.26 Thresholds of AMR HR 2 ...................................................................2-812
2.21.27 Thresholds of AMR HR 3 ...................................................................2-813

XXII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.21.28 Thresholds of AMR HR 4 ...................................................................2-814
2.21.29 Thresholds of AMR HR 5 ...................................................................2-815
2.21.30 Hysteresis of AMR FR 1.....................................................................2-816
2.21.31 Hysteresis of AMR FR 2.....................................................................2-818
2.21.32 Hysteresis of AMR FR 3.....................................................................2-819
2.21.33 Hysteresis of AMR FR 4.....................................................................2-820
2.21.34 Hysteresis of AMR FR 5.....................................................................2-821
2.21.35 Hysteresis of AMR FR 6.....................................................................2-823
2.21.36 Hysteresis of AMR FR 7.....................................................................2-824
2.21.37 Hysteresis of AMR HR 1 ....................................................................2-825
2.21.38 Hysteresis of AMR HR 2 ....................................................................2-826
2.21.39 Hysteresis of AMR HR 3 ....................................................................2-828
2.21.40 Hysteresis of AMR HR 4 ....................................................................2-829
2.21.41 Hysteresis of AMR HR 5 ....................................................................2-830
2.21.42 Enable AMR FR noise control.............................................................2-831
2.21.43 AMR FR Initial codec mode ................................................................2-832
2.21.44 AMR FR Start mode ..........................................................................2-833
2.21.45 Enable AMR HR noise control ............................................................2-835
2.21.46 AMR HR Initial codec mode ...............................................................2-836
2.21.47 AMR HR Start mode ..........................................................................2-837
2.21.48 AMR codec adjust mode ....................................................................2-838
2.21.49 AMR codec adjust interval..................................................................2-839
2.21.50 BSS radio link timer's max value for AMR FR ......................................2-840
2.21.51 BSS radio link timer's max value for AMR HR ......................................2-842
2.21.52

MAX value of MS Radio link

timeout for AMR FR

...........................................................................................................2-843
2.21.53

MAX value of MS Radio link

timeout for AMR HR

...........................................................................................................2-845
2.21.54 Support AMR-WB Codec ...................................................................2-846
2.21.55 Hysteresis of AMRWFS 1...................................................................2-847
2.21.56 Hysteresis of AMRWFS 2...................................................................2-848
2.21.57 Hysteresis of AMRWFS 3...................................................................2-850
2.21.58 Hysteresis of AMRWFS 4...................................................................2-851

XXIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.21.59 Hysteresis of AMROWFS 1 ................................................................2-852
2.21.60 Hysteresis of AMROWFS 2 ................................................................2-853
2.21.61 Hysteresis of AMROWHS 1................................................................2-854
2.21.62 Hysteresis of AMROWHS 2................................................................2-856
2.21.63 Thresholds for AMRWFS 1.................................................................2-857
2.21.64 Thresholds for AMRWFS 2.................................................................2-858
2.21.65 Thresholds for AMRWFS 3.................................................................2-859
2.21.66 Thresholds for AMRWFS 4.................................................................2-861
2.21.67 Thresholds for AMROWFS 1 ..............................................................2-862
2.21.68 Thresholds for AMROWFS 2 ..............................................................2-863
2.21.69 Thresholds for AMROWHS 1..............................................................2-864
2.21.70 Thresholds for AMROWHS 2..............................................................2-865
2.21.71

MAX value of MS Radio link

timeout for AMR WFS

...........................................................................................................2-867
2.21.72

MAX value of MS Radio link

timeout for AMR-WB OWFS

...........................................................................................................2-868
2.21.73

MAX value of MS Radio link

timeout for AMR-WB OWHS

...........................................................................................................2-870
2.21.74 BSS radio link timers max value for FR-AMR-WB ...............................2-872
2.21.75 BSS radio link timer's max value for OFR-AMR-WB .............................2-873
2.21.76 BSS radio link timer's max value for AMR OWHR ................................2-875
2.22 Frequency Hopping System(GHoppingFrequency) ..........................................2-876
2.22.1 Frequency Hopping System ID .............................................................2-876
2.22.2 FhsID .................................................................................................2-877
2.22.3 Hopping sequence No. ........................................................................2-878
2.22.4 MA Frequency List ..............................................................................2-879
2.23 Baseband Hopping System(GHoppingBaseband)............................................2-880
2.23.1 Baseband Hopping System ID..............................................................2-880
2.23.2 FhsID .................................................................................................2-881
2.23.3 Hopping sequence No. ........................................................................2-882

XXIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.23.4 MA Frequency List ..............................................................................2-883
2.24 Handover Control(GHandoverControl) ............................................................2-884
2.24.1 Handover Control ID ............................................................................2-884
2.24.2 Uplink power level Sample count ..........................................................2-885
2.24.3 Uplink level Weight ..............................................................................2-886
2.24.4 Downlink power level Sample count......................................................2-888
2.24.5 Downlink level Weight..........................................................................2-889
2.24.6 Uplink quality Sample count .................................................................2-890
2.24.7 Uplink quality Weight ...........................................................................2-891
2.24.8 Downlink quality Sample count .............................................................2-893
2.24.9 Downlink quality Weight .......................................................................2-894
2.24.10 Distance ...........................................................................................2-895
2.24.11 Neighboring cell.................................................................................2-896
2.24.12 Number of zero allowed in AV.............................................................2-897
2.24.13 MIN interval between inter-cell handover.............................................2-899
2.24.14 Max time advance threshold between MS and BTS .............................2-900
2.24.15 Uplink receive level Threshold ............................................................2-901
2.24.16 Downlink receive level Threshold........................................................2-904
2.24.17 Uplink receive quality Threshold .........................................................2-907
2.24.18 Downlink receive quality Threshold .....................................................2-908
2.24.19 Uplink receive level of intra-ho Threshold ............................................2-909
2.24.20 Downlink receive level of intra-ho Threshold........................................2-912
2.24.21 Uplink receive level Value P ...............................................................2-914
2.24.22 Uplink receive level Value N ...............................................................2-916
2.24.23 Downlink receive level Value P ...........................................................2-917
2.24.24 Downlink receive level Value N ...........................................................2-918
2.24.25 Uplink receive quality Value P.............................................................2-919
2.24.26 Uplink receive quality Value N ............................................................2-921
2.24.27 Downlink receive quality Value P ........................................................2-922
2.24.28 Downlink receive quality Value N ........................................................2-923
2.24.29 Uplink receive level of intra-ho Value P ...............................................2-924
2.24.30 Uplink receive level of intra-ho Value N ...............................................2-925
2.24.31 Downlink receive level of intra-ho Value P ...........................................2-927
2.24.32 Downlink receive level of intra-ho Value N ...........................................2-928
2.24.33 Distance handover Value P ................................................................2-929
2.24.34 Distance handover Value N ................................................................2-930
2.24.35 PBGT handover Value P ....................................................................2-931

XXV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.24.36 PBGT handover Value N ....................................................................2-932
2.24.37 Allow intra-Cell handover attempt due to uplink interference(High
Speed) ................................................................................................2-933
2.24.38 Allow intra-Cell handover attempt due to downlink interference(High
Speed) ................................................................................................2-934
2.24.39 Allow handover due to distance(High Speed) ......................................2-935
2.24.40 Allow standard PBGT handover(High Speed) ......................................2-936
2.24.41 Allow automatic handover due to traffic(High Speed) ...........................2-937
2.24.42 Allow intra-cell handover in super TRX channel due to downlink
interference(High Speed)......................................................................2-938
2.24.43 Allow intra-cell handover in super TRX channel due to uplink
interference(High Speed)......................................................................2-939
2.24.44 Allow adjacent cells handover in super TRX channel due to PBGT(High
Speed) ................................................................................................2-940
2.24.45 Allow rapid handover(High Speed)......................................................2-941
2.24.46 Allow Macro-Micro delay handover(High Speed)..................................2-942
2.24.47 Allow Micro-Micro delay handover(High Speed)...................................2-943
2.24.48 Allow force transfer handover(High Speed) .........................................2-944
2.24.49 Allow quality handover in uplink(High Speed) ......................................2-945
2.24.50 Allow level handover in uplink(High Speed) .........................................2-945
2.24.51 Allow quality handover in downlink(High Speed) ..................................2-946
2.24.52 Allow level handover in downlink(High Speed).....................................2-947
2.24.53 Allow downlink rapid handover(High Speed)........................................2-948
2.24.54 Allow C/I limited handover(High Speed) ..............................................2-949
2.24.55 Allow downlink quality rapid handover(High Speed) .............................2-950
2.24.56 Allow intra-Cell handover attempt due to uplink interference(Middle
Speed) ................................................................................................2-952
2.24.57 Allow intra-Cell handover attempt due to downlink interference(Middle
Speed) ................................................................................................2-953
2.24.58 Allow handover due to distance(Middle Speed) ...................................2-954
2.24.59 Allow standard PBGT handover(Middle Speed) ...................................2-954
2.24.60 Allow automatic handover due to traffic(Middle Speed) ........................2-955
2.24.61 Allow intra-cell handover in super TRX channel due to downlink
interference(Middle Speed)...................................................................2-956
2.24.62 Allow intra-cell handover in super TRX channel due to uplink
interference(Middle Speed)...................................................................2-957
2.24.63 Allow adjacent cells handover in super TRX channel due to
PBGT(Middle Speed) ...........................................................................2-958
2.24.64 Allow rapid handover(Middle Speed)...................................................2-959

XXVI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.24.65 Allow Macro-Micro delay handover(Middle Speed)...............................2-960
2.24.66 Allow Micro-Micro delay handover(Middle Speed)................................2-961
2.24.67 Allow force transfer handover(Middle Speed) ......................................2-962
2.24.68 Allow quality handover in uplink(Middle Speed) ...................................2-963
2.24.69 Allow level handover in uplink(Middle Speed) ......................................2-964
2.24.70 Allow quality handover in downlink(Middle Speed) ...............................2-965
2.24.71 Allow level handover in downlink(Middle Speed)..................................2-966
2.24.72 Allow downlink rapid handover(Middle Speed).....................................2-967
2.24.73 Allow C/I limited handover(Middle Speed) ...........................................2-968
2.24.74 Allow downlink quality rapid handover(Middle Speed) ..........................2-969
2.24.75 Allow intra-Cell handover attempt due to uplink interference(Low
Speed) ................................................................................................2-970
2.24.76 Allow intra-Cell handover attempt due to downlink interference(Low
Speed) ................................................................................................2-971
2.24.77 Allow handover due to distance(Low Speed) .......................................2-972
2.24.78 Allow standard PBGT handover(Low Speed).......................................2-973
2.24.79 Allow automatic handover due to traffic(Low Speed) ............................2-974
2.24.80 Allow intra-cell handover in super TRX channel due to downlink
interference(Low Speed) ......................................................................2-975
2.24.81 Allow intra-cell handover in super TRX channel due to uplink
interference(Low Speed) ......................................................................2-976
2.24.82 Allow adjacent cells handover in super TRX channel due to PBGT(Low
Speed) ................................................................................................2-977
2.24.83 Allow dynamic adjustment of handover priority ....................................2-978
2.24.84 Allow rapid handover(Low Speed) ......................................................2-979
2.24.85 Allow Macro-Micro delay handover(Low Speed) ..................................2-980
2.24.86 Allow Micro-Micro delay handover(Low Speed)....................................2-981
2.24.87 Allow force transfer handover(Low Speed) ..........................................2-982
2.24.88 Allow quality handover in uplink(Low Speed) .......................................2-983
2.24.89 Allow level handover in uplink(Low Speed)..........................................2-983
2.24.90 Allow quality handover in downlink(Low Speed)...................................2-984
2.24.91 Allow level handover in downlink(Low Speed)......................................2-985
2.24.92 Allow downlink rapid handover(Low Speed) ........................................2-986
2.24.93 Allow C/I limited handover(Low Speed) ...............................................2-987
2.24.94 Allow downlink quality rapid handover(Low Speed) ..............................2-988
2.24.95 Synchronism .....................................................................................2-989
2.24.96 Asynchronism ...................................................................................2-990
2.24.97 Pseudo-synchronism .........................................................................2-991

XXVII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.24.98 Pre-synchronism ...............................................................................2-992
2.24.99 Prior layer selecting parameter on signal level/quality ..........................2-993
2.24.100 Rapid handover Threshold ...............................................................2-995
2.24.101 Rapid handover Value N ..................................................................2-997
2.24.102 Handover to same layer other band neighbour cell for PBGT
permitted .............................................................................................2-998
2.24.103 Handover to neighbour cell with no Layer Relation for PBGT
permitted .............................................................................................2-999
2.24.104 Handover to upper layer neighbour cell for PBGT permitted .............2-1000
2.24.105 Handover to under layer neighbor cell for PBGT permitted ...............2-1001
2.24.106 Penalty time for handover failure.....................................................2-1002
2.24.107 Difference of dynamic priority .........................................................2-1003
2.24.108 PBGT difference ............................................................................2-1004
2.24.109 Same layer permitted on traffic HO .................................................2-1005
2.24.110 Upper layer permitted on traffic HO .................................................2-1006
2.24.111 Lower layer permitted on traffic HO .................................................2-1007
2.24.112 Undefined layer permitted on traffic HO ...........................................2-1008
2.24.113

GSM900 frequency band P-GSM

permitted on traffic HO

.........................................................................................................2-1009
2.24.114 EXT900 frequency band E-GSM permitted on traffic HO...................2-1010
2.24.115 DCS1800 frequency band permitted on traffic HO ............................ 2-1011
2.24.116 PCS1900 frequency band permitted on traffic HO ............................2-1012
2.24.117 GSM850 frequency band permitted on traffic HO .............................2-1013
2.24.118 Threshold of traffic for handover......................................................2-1014
2.24.119 Traffic handover threshold ..............................................................2-1015
2.24.120 Level offset during penalty..............................................................2-1016
2.24.121 Uplink interference quality offset .....................................................2-1017
2.24.122 Uplink interference level offset ........................................................2-1019
2.24.123 Downlink interference quality offset .................................................2-1020
2.24.124 Downlink interference level offset....................................................2-1021
2.24.125 Invalid intra-handover time .............................................................2-1023
2.24.126 MAX count of invalid intra-handover................................................2-1024
2.24.127 MAX path loss threshold on force handover.....................................2-1025
2.24.128 MAX time advance threshold on force handover ..............................2-1027
2.24.129 N value of force handover ..............................................................2-1028

XXVIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.24.130 P value of force handover...............................................................2-1030
2.24.131 Level offset for PBGT to up layer ....................................................2-1031
2.24.132 Level offset for PBGT to low layer ...................................................2-1032
2.24.133 Lag time for PBGT between different layers.....................................2-1034
2.24.134 The threshold for starting PBGT handover.......................................2-1035
2.24.135 The priority of the handover from Macro cell to Micro cell .................2-1036
2.24.136 Handover from macro to micro........................................................2-1037
2.24.137 Hysteresis timer when traffic handover ............................................2-1038
2.24.138 Downlink rapid handover offset of high speed ..................................2-1038
2.24.139 Downlink rapid handover offset of middle speed ..............................2-1040
2.24.140 Downlink rapid handover offset of low speed ...................................2-1041
2.24.141 Handover back penalty ..................................................................2-1042
2.24.142 MIN interval between inter-cell emergency handover .......................2-1043
2.24.143 Handover back penalty after emergency handover...........................2-1044
2.24.144 Neighbour cell for emergency handover ..........................................2-1045
2.24.145 Downlink rapid quality drop THS ....................................................2-1046
2.24.146 Downlink rapid quality drop Value N ................................................2-1047
2.24.147 Quality weight of recent measure value ...........................................2-1048
2.24.148 Level weight of recent measurement value level ..............................2-1049
2.24.149 The load of HO from FR to HR(V3) .................................................2-1050
2.24.150 The load of HO from FR to HR(V1) .................................................2-1051
2.24.151 The quality of HO from FR to HR ....................................................2-1053
2.24.152 The quality of HO from HR(V1) to FR ..............................................2-1054
2.24.153 The quality of HO from HR(V3) to FR ..............................................2-1055
2.24.154 P value of load and quality handover...............................................2-1056
2.24.155 N value of load and quality handover ..............................................2-1057
2.24.156

Penalty time for handover caused

by interference

.........................................................................................................2-1059
2.24.157 Interference band requirement for intracell handover caused by
interference .......................................................................................2-1060
2.24.158 Prefer layer for traffic handover.......................................................2-1061
2.24.159 PBGT offset of prefer layer for traffic handover ................................2-1062
2.24.160 Prefer band for traffic handover ......................................................2-1063
2.24.161

PBGT offset of prefer band

XXIX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


for traffic handover

.........................................................................................................2-1064
2.24.162 The threshold for starting Downlink Rapid handover.........................2-1065
2.24.163 High speed threshold .....................................................................2-1066
2.24.164 Middle speed threshold ..................................................................2-1067
2.24.165 The minimum interval of direction handover.....................................2-1068
2.24.166 The ncell offset for downlink rapid handover ....................................2-1069
2.24.167 The offset of ncell in the same direction...........................................2-1070
2.24.168 Allow signal quality handover on TCH(High speed) ..........................2-1071
2.24.169 Allow signal quality handover on TCH(Middle speed) .......................2-1072
2.24.170 Allow signal quality handover on TCH(Low speed)...........................2-1073
2.24.171 Handover Threshole of Mean Bit Error Probability on TCH ...............2-1074
2.24.172 Handover P Number of Mean Bit Error Probability on TCH ...............2-1075
2.24.173 Handover N Number of Mean Bit Error Probability on TCH ...............2-1075
2.24.174 Handover Threshole of CV Bit Error Probability on TCH ...................2-1076
2.24.175 Handover P Number of CV Bit Error Probability on TCH ...................2-1077
2.24.176 Handover N Number of CV Bit Error Probability on TCH...................2-1078
2.24.177 If support intra-handover from FR to HR due to high load .................2-1079
2.24.178 If support intra-handover from HR to FR due to bad quality...............2-1080
2.24.179 Is Dual-Frequency Traffic Handover Support ...................................2-1081
2.24.180 Dual-Frequency Handover Parameter N..........................................2-1082
2.24.181 Dual-Frequency Handover Parameter P..........................................2-1083
2.24.182 Dual-Frequency Handover TA Threshold.........................................2-1084
2.24.183 Dual-Frequency Handover RxLevel Threshold.................................2-1085
2.24.184 Circuit data handover control ..........................................................2-1085
2.24.185 Back to Source Cell when PBGT Handover .....................................2-1086
2.24.186

Back to Source Cell when Other

Handover

.........................................................................................................2-1087
2.24.187 HoAccess Require Rxlevel offset ....................................................2-1088
2.24.188

HoAccess Require Rxlevel Select

Strategy when Other Handover

.........................................................................................................2-1089
2.24.189 Dual-Frequency Traffic Handover Threshold....................................2-1090
2.24.190 Support handover from HR to FR due to low load ............................2-1091

XXX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.24.191 The load of HO from HRV1 to FR ............................................2-1092
2.24.192 The load of HO from HRV3 to FR ............................................2-1093
2.24.193 HR to FR handover downlink level start threshold ............................2-1094
2.24.194 FR to HR handover downlink level start threshold ............................2-1095
2.24.195 Back to Source Cell when MSC Controlled Incoming Handover ........2-1096
2.24.196 Good level and bad quality handover DL Level ................................2-1097
2.24.197 HoAccess Require CI ....................................................................2-1098
2.24.198 Good level and bad quality handover enable ...................................2-1099
2.25 SDCCH Handover Control(GSdHandoverControl) ......................................... 2-1100
2.25.1 SDCCH Handover Control ID ............................................................. 2-1100
2.25.2 Allow Distance SDCCH handover(High Speed) ................................... 2-1101
2.25.3 Allow PBGT SDCCH handover(High Speed) ....................................... 2-1102
2.25.4 Allow rapid SDCCH handover(High Speed)......................................... 2-1103
2.25.5 Allow quality SDCCH handover in uplink(High Speed) ......................... 2-1104
2.25.6 Allow level SDCCH handover in uplink(High Speed) ............................ 2-1105
2.25.7 Allow quality SDCCH handover in downlink(High Speed) ..................... 2-1106
2.25.8 Allow level SDCCH handover in downlink(High Speed) ........................ 2-1107
2.25.9 Downlink rapid SDCCH handover enable(High Speed) ........................ 2-1108
2.25.10 Downlink rapid quality drop THS(High Speed) ................................... 2-1109
2.25.11 Allow Distance SDCCH handover(Middle Speed)............................... 2-1110
2.25.12 Allow PBGT SDCCH handover(Middle Speed) .................................. 2-1111
2.25.13 Allow rapid SDCCH handover(Middle Speed) .................................... 2-1112
2.25.14 Allow quality SDCCH handover in uplink(Middle Speed)..................... 2-1113
2.25.15 Allow level SDCCH handover in uplink(Middle Speed) ....................... 2-1114
2.25.16 Allow quality SDCCH handover in downlink(Middle Speed) ................ 2-1115
2.25.17 Allow level SDCCH handover in downlink(Middle Speed) ................... 2-1116
2.25.18 Downlink rapid SDCCH handover enable(Middle Speed) ................... 2-1117
2.25.19 Downlink rapid quality drop THS(Middle Speed) ................................ 2-1118
2.25.20 Allow SDCCH handover ................................................................... 2-1119
2.25.21 Allow Distance SDCCH handover(Low Speed) .................................. 2-1120
2.25.22 Allow PBGT SDCCH handover(Low Speed) ...................................... 2-1121
2.25.23 Allow dynamic adjustment of SDCCH handover priority...................... 2-1122
2.25.24 Allow rapid SDCCH handover(Low Speed)........................................ 2-1123
2.25.25 Allow quality SDCCH handover in uplink(Low Speed) ........................ 2-1124
2.25.26 Allow level SDCCH handover in uplink(Low Speed) ........................... 2-1125
2.25.27 Allow quality SDCCH handover in downlink(Low Speed) .................... 2-1126
2.25.28 Allow level SDCCH handover in downlink(Low Speed)....................... 2-1127

XXXI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.25.29 Downlink rapid SDCCH handover enable(Low Speed) ....................... 2-1128
2.25.30 Downlink rapid quality drop THS(Low Speed) .................................... 2-1129
2.25.31 Perform PBGT SDCCH handover by Directed retry(Low Speed)......... 2-1130
2.25.32 Uplink power level Sample count ...................................................... 2-1131
2.25.33 Downlink power level Sample count.................................................. 2-1133
2.25.34 Uplink quality Sample count ............................................................. 2-1134
2.25.35 Downlink quality Sample count ......................................................... 2-1135
2.25.36 Distance ......................................................................................... 2-1136
2.25.37 Neighboring cell............................................................................... 2-1137
2.25.38 Number of zero allowed in AV........................................................... 2-1139
2.25.39 Uplink receive level Threshold .......................................................... 2-1140
2.25.40 Downlink receive level Threshold...................................................... 2-1143
2.25.41 Uplink receive quality Threshold ....................................................... 2-1145
2.25.42 Downlink receive quality Threshold ................................................... 2-1147
2.25.43 Uplink receive level Value P ............................................................. 2-1148
2.25.44 Uplink receive level Value N ............................................................. 2-1149
2.25.45 Downlink receive level Value P ......................................................... 2-1151
2.25.46 Downlink receive level Value N ......................................................... 2-1152
2.25.47 Uplink receive quality Value P........................................................... 2-1153
2.25.48 Uplink receive quality Value N .......................................................... 2-1154
2.25.49 Downlink receive quality Value P ...................................................... 2-1156
2.25.50 Downlink receive quality Value N ...................................................... 2-1157
2.25.51 Rapid handover Threshold ............................................................... 2-1158
2.25.52 Rapid handover Value N .................................................................. 2-1159
2.25.53 Max time advance threshold between MS and BTS ........................... 2-1161
2.25.54 Distance handover Value P .............................................................. 2-1162
2.25.55 Distance handover Value N .............................................................. 2-1163
2.25.56 Downlink rapid handover offset of high speed.................................... 2-1164
2.25.57 Downlink rapid handover offset of middle speed ................................ 2-1165
2.25.58 Downlink rapid handover offset of low speed ..................................... 2-1166
2.25.59 PBGT handover Value P .................................................................. 2-1167
2.25.60 PBGT handover Value N .................................................................. 2-1168
2.25.61 Downlink rapid quality drop THS ...................................................... 2-1169
2.25.62 Downlink rapid quality drop Value N .................................................. 2-1170
2.25.63 Neighbour cell for emergency handover ............................................ 2-1171
2.25.64 Allow signal quality handover on SDCCH(High speed) ....................... 2-1173
2.25.65 Allow signal quality handover on SDCCH(Middle speed) .................... 2-1173

XXXII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.25.66 Allow signal quality handover on SDCCH(Low speed)........................ 2-1174
2.25.67 Handover Threshold of Mean Bit Error Probability on SDCCH ............ 2-1175
2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH................ 2-1176
2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH ............... 2-1177
2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH ................ 2-1178
2.25.71 Handover P Number of CV Bit Error Probability on SDCCH................ 2-1179
2.25.72 Handover N Number of CV Bit Error Probability on SDCCH................ 2-1180
2.25.73 Back to Source Cell when PBGT Handover ....................................... 2-1181
2.25.74

Back to Source Cell when Other

Handover

......................................................................................................... 2-1182
2.25.75 HoAccess Require Rxlevel offset ...................................................... 2-1183
2.25.76

HoAccess Require Rxlevel Select

Strategy when Other Handover

......................................................................................................... 2-1184
2.25.77 Back to Source Cell when MSC Controlled Incoming Handover .......... 2-1185
2.25.78 HoAccess Require CI....................................................................... 2-1186
2.25.79 Good level and bad quality handover enable ..................................... 2-1187
2.25.80 Good level and bad quality handover DL Level .................................. 2-1188
2.26 VAMOS Configuration(GVamos)................................................................... 2-1189
2.26.1 VAMOS Configuration ID ................................................................... 2-1189
2.26.2 If support VAMOS.............................................................................. 2-1190
2.26.3 If support MUTE SAIC detection ......................................................... 2-1191
2.26.4 If support SAIC AFC detection............................................................ 2-1191
2.26.5 The priority level of VAMOS pairing .................................................... 2-1192
2.26.6 The load of start VAMOS FR pairing ................................................... 2-1193
2.26.7 The load of start VAMOS HR pairing................................................... 2-1195
2.26.8 Support VAMOS II ............................................................................. 2-1196
2.26.9 P value of MS capability predetect ...................................................... 2-1197
2.26.10 N value of pair-release uplink quality................................................. 2-1197
2.26.11 N value of pair-release downlink quality............................................. 2-1198
2.26.12 N value of MS capability predetect .................................................... 2-1199
2.26.13 Low level threshold of MS capability detect .......................................2-1200
2.26.14 High level threshold of MS capability detect.......................................2-1201
2.26.15 Downlink receive quality of pair-release threshold..............................2-1202

XXXIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.26.16 AFC detect switch of MUTE SAIC.....................................................2-1203
2.26.17 Uplink receive quality of pair-release threshold ..................................2-1204
2.26.18 The period of SAIC AFC power control .............................................2-1205
2.26.19 The load of VAMOS pair release.......................................................2-1206
2.26.20 The level power control switch of MS capability detect .......................2-1207
2.26.21 The alpha value of SAIC AFC power control .....................................2-1208
2.26.22 Support pair release due to quality....................................................2-1209
2.26.23 Support handover from VAMOS FR to VAMOS HR ............................2-1210
2.26.24 SAIC AFC power control switch ........................................................2-1210
2.26.25 Pair of FR with HR........................................................................... 2-1211
2.26.26 P value of pair-release uplink quality .................................................2-1212
2.26.27 P value of pair-release downlink quality.............................................2-1213
2.27 UTRAN Measurement(GUtranMeasure)........................................................2-1214
2.27.1 UTRAN Measurement ID ...................................................................2-1214
2.27.2 Require UE to send UTRAN class-mark change message early ...........2-1215
2.27.3 Channel location of si2quater broadcast..............................................2-1216
2.27.4 CS measurement type reported by UE................................................2-1217
2.27.5 CS number of same frequency adjacent cells in report.........................2-1218
2.27.6 Measurement threshold of UE performing UTRAN cell reselection........2-1219
2.27.7 FDD reselection offset .......................................................................2-1220
2.27.8 Min Ec/No of UTRAN reselecting cell..................................................2-1222
2.27.9 Initial parameter instead of qsearch_c before UE receiving
qsearch_C.........................................................................................2-1223
2.27.10 Threshold when UE performs search under specialized mode ............2-1224
2.27.11 CS class of reported quantities of UTRAN adjacent cells ....................2-1225
2.27.12 CS max number of UTRAN/FDD adjacent cells in measurement
report ................................................................................................2-1226
2.27.13 Measurement threshold of UE performing GPRS UTRAN
cell_0/Measurement threshold of UE performing_1 GPRS UTRAN
cell....................................................................................................2-1227
2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection offset_1 .......2-1228
2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection offset_1 .......2-1230
2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
reselecting cell_1 ...............................................................................2-1232
2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1 ................................2-1233
2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
reselecting cell_1 ...............................................................................2-1234
2.27.19 Measurement report threshold of Ec/No or RSCP(PS) .......................2-1236

XXXIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.27.20 CS measurement reporting rate of adjacent cell.................................2-1237
2.27.21 CS UE report invalid cell level allowed ..............................................2-1238
2.27.22 MulBndRprtCS ................................................................................2-1239
2.27.23 CS offset which is added when UE reports rxlev value .......................2-1240
2.27.24 GSM900M Adjacent cell reporting signal level Offset .........................2-1241
2.27.25 GSM900M Adjacent cell reporting signal level Threshold ...................2-1242
2.27.26 GSM1800M Adjacent cell reporting signal level Offset........................2-1243
2.27.27 GSM1800M Adjacent cell reporting signal level Threshold..................2-1244
2.27.28 GSM1900M Adjacent cell reporting signal level Offset........................2-1245
2.27.29 GSM1900M Adjacent cell reporting signal level Threshold..................2-1246
2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset ......................2-1247
2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold ................2-1248
2.27.32 Reporting threshold for the Ec/No or RSCP that is not reported ..........2-1249
2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame
indication...........................................................................................2-1250
2.27.34 GSM850M Adjacent cell reporting signal level Threshold ...................2-1251
2.27.35 GSM850M Adjacent cell reporting signal level Offset .........................2-1252
2.27.36 TDD reselection offset .....................................................................2-1253
2.27.37 CS MAX number of UTRAN/TDD adjacent cells in measurement
report ................................................................................................2-1254
2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset ......................2-1255
2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold ................2-1256
2.27.40 PS measurement type reported by UE ..............................................2-1257
2.27.41 PS number of same frequency adjacent cells in report ......................2-1258
2.27.42 PS class of reported quantities of UTRAN adjacent cells ....................2-1259
2.27.43 PS max number of UTRAN/FDD adjacent cells in measurement
report ................................................................................................2-1260
2.27.44 PS measurement reporting rate of adjacent cell.................................2-1261
2.27.45 PS UE report invalid cell level allowed ..............................................2-1262
2.27.46 PS multi-band report indication .........................................................2-1263
2.27.47 PS offset which is added when UE reports RXLEV value ...................2-1264
2.27.48 GSM 900 Offset(PS) ........................................................................2-1266
2.27.49 GSM 900 Threshold(PS) ..................................................................2-1267
2.27.50 GSM 1800 Offset(PS) ......................................................................2-1267
2.27.51 GSM 1800 Threshold(PS) ................................................................2-1268
2.27.52 GSM 1900 Offset(PS) ......................................................................2-1269
2.27.53 GSM 1900 Threshold(PS) ................................................................2-1270
2.27.54 UTRAN/FDD Offset .........................................................................2-1271

XXXV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.27.55 UTRAN/FDD Threshold ...................................................................2-1272
2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame
indication...........................................................................................2-1273
2.27.57 GSM 850 Threshold(PS) ..................................................................2-1275
2.27.58 GSM 850 Offset(PS) ........................................................................2-1276
2.27.59 TDD multi report PS.........................................................................2-1277
2.27.60 UTRAN/TDD Offset .........................................................................2-1278
2.27.61 UTRAN/TDD Threshold ...................................................................2-1279
2.27.62 Reselect priority control of 2G/3G .....................................................2-1280
2.27.63 Max Number In Adjacent GSM cell ...................................................2-1281
2.27.64 A minimum threshold of RSCP for UTRAN FDD cell re-selection ........2-1282
2.27.65 Applies an offset to FDD_Qmin value................................................2-1283
2.27.66 Service UTRAN CCO support...........................................................2-1284
2.27.67

Signal strength and load and

capacity priority

.........................................................................................................2-1285
2.27.68 Signal strength threshold..................................................................2-1286
2.27.69 Load threshold ................................................................................2-1288
2.27.70 Available capacity threshold .............................................................2-1289
2.28 E-UTRAN Measurement(GEutranMeasure)...................................................2-1290
2.28.1 E-UTRAN Measurement ID ................................................................2-1290
2.28.2 Initial parameter instead of qsearch_c before UE receiving
qsearch_C.........................................................................................2-1291
2.28.3

Class of reported quantities of E-UTRAN adjacent cells

.........................................................................................................2-1292
2.28.4 Max number of E-UTRAN adjacent cells in measurement report...........2-1293
2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit.............2-1294
2.28.6 FDD Measurement report threshold of RSRQ or RSRP in 6-bit
reporting............................................................................................2-1295
2.28.7 TDD Measurement report threshold of RSRP or RSRQ in 6-bit
reporting............................................................................................2-1296
2.28.8 TDD Measurement report threshold of RSRQ or RSRP in 6-bit
reporting............................................................................................2-1297
2.28.9 FDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1298

XXXVI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.28.10 FDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1299
2.28.11 TDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1300
2.28.12 TDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1301
2.28.13 Measurement report threshold offset of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1302
2.28.14 Measurement threshold of UE performing GPRS E-UTRAN Cell ........2-1303
2.28.15 GPRS max number of E-UTRAN adjacent cells in measurement
report ................................................................................................2-1304
2.28.16

GPRS class of reported quantities of E-UTRAN adjacent cells

.........................................................................................................2-1305
2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ ...........2-1306
2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP ...........2-1307
2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ ...........2-1308
2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP ...........2-1309
2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In
Dedicated Mode.................................................................................2-1310
2.28.22 Slippery window size for calculating average value of E-Utran
Neighbour Cell .................................................................................. 2-1311
2.28.23 offset to the reported value when prioritizing the FDD E-UTRAN cells
for 6bit reporting.................................................................................2-1312
2.28.24 offset to the reported value when prioritizing the TDD E-UTRAN cells
for 6bit reporting.................................................................................2-1313
2.28.25 offset to the reported value when prioritizing the FDD E-UTRAN cells
for 3bit reporting.................................................................................2-1314
2.28.26 offset to the reported value when prioritizing the TDD E-UTRAN cells
for 3bit reporting.................................................................................2-1315
2.28.27 offset to the reported value when prioritizing the FDD E-UTRAN cells
for PS................................................................................................2-1316
2.28.28 offset to the reported value when prioritizing the TDD E-UTRAN cells
for PS................................................................................................2-1317
2.29 UTRAN Handover Control(GUtranHandoverControl)......................................2-1318
2.29.1 UTRAN Handover Control ID .............................................................2-1318
2.29.2 Inter system handover supported........................................................2-1319
2.29.3 Punishment period of UTRAN cell when handover failure.....................2-1320
2.29.4 Slippery window size for calculating Ec/No or RSCP average value to
be zero..............................................................................................2-1321

XXXVII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.29.5 Number that measurement value allowed to be zero............................2-1322
2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold ........................2-1323
2.29.7 Handover from GSM to UTRAN FDD RSCP Value P ...........................2-1325
2.29.8 Handover from GSM to UTRAN FDD RSCP Value N ...........................2-1325
2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold ........................2-1326
2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P..........................2-1327
2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N..........................2-1328
2.29.12 Directed retry to UTRAN cell allowed ................................................2-1329
2.29.13 FDD/TDD handover .........................................................................2-1330
2.29.14 UTRAN handover ............................................................................2-1331
2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold ......................2-1333
2.29.16 Handover from GSM to UTRAN TDD RSCP Value N .........................2-1334
2.29.17 Handover from GSM to UTRAN TDD RSCP Value P .........................2-1335
2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing ..............................................................................................2-1336
2.29.19 Ec/No threshold when handover from GSM to 3G for load sharing ......2-1337
2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing ..............................................................................................2-1339
2.29.21 Penalty time of handover failure(PS) .................................................2-1340
2.29.22 Window of calculating 3G cell(PS) ....................................................2-1341
2.29.23 Support PS handover of Inter-System(PS) ........................................2-1342
2.29.24 Number of zero in measure result(PS) ..............................................2-1343
2.29.25 Priority to FDD or TDD(PS) ..............................................................2-1344
2.29.26 RSCP threshold to FDD in load handover(PS)...................................2-1345
2.29.27 Ec/No threshold to FDD in load handover(PS) ...................................2-1346
2.29.28 RSCP threshold to TDD in load handover(PS)...................................2-1347
2.29.29 RSCP threshold to FDD(PS) ............................................................2-1348
2.29.30 P of handovering to FDD by RSCP(PS) ............................................2-1349
2.29.31 N of handovering to FDD by RSCP(PS) ............................................2-1350
2.29.32 EcNo threshold to FDD(PS) .............................................................2-1351
2.29.33 P of handovering to FDD by EcNo(PS)..............................................2-1352
2.29.34 N of handovering to FDD by EcNo(PS) .............................................2-1353
2.29.35 RSCP threshold to TDD(PS) ............................................................2-1354
2.29.36 N of handovering to TDD by RSCP(PS) ............................................2-1355
2.29.37 P of handovering to TDD by RSCP ...................................................2-1356
2.29.38 21102170M frequency band permitted...........................................2-1357
2.29.39 925960M frequency band permitted ..............................................2-1358
2.29.40 869894M frequency band permitted ..............................................2-1359

XXXVIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.29.41 Other Frequency band permitted ......................................................2-1360
2.29.42 20102025M frequency band permitted...........................................2-1361
2.29.43 18801900M frequency band permitted...........................................2-1362
2.29.44 Other Frequency band permitted ......................................................2-1363
2.30 Site(GBtsSiteManager) ................................................................................2-1364
2.30.1 Site ID ..............................................................................................2-1364
2.30.2 GBtsEquipment DN ...........................................................................2-1365
2.30.3 Config Paging Repeat Support ...........................................................2-1366
2.30.4 Inter SubCell handover permitted .......................................................2-1367
2.30.5 Support new abis ps message............................................................2-1369
2.30.6 The Abis band limit of HR priority........................................................2-1369
2.30.7 The Abis band of HO from FR to HR...................................................2-1370
2.30.8 Minimal number of idle E1 Abis Timeslot .............................................2-1371
2.30.9 Minimal of usable IP Abis bandwidth...................................................2-1372
2.30.10 the master power control option for Base Transceiver Station .............2-1373
2.30.11 the delay time of master power Off....................................................2-1374
2.30.12 the delay time of Transceivers Off.....................................................2-1375
2.30.13 the Percent for Transceivers Off .......................................................2-1376
2.30.14 the GNode id for master power control ..............................................2-1377
2.30.15 Benchmark Site ...............................................................................2-1378
2.31 Site baseband share Configuration(GSiteBaseBandShare) ............................2-1379
2.31.1 Site baseband share Configuration ID.................................................2-1379
2.31.2 Baseband resource share support ......................................................2-1380
2.31.3 Traffic threshold for allocate baseband................................................2-1381
2.31.4 Traffic threshold for release baseband ................................................2-1382
2.31.5 Channel busy threshold for urgent allocate baseband ..........................2-1383
2.31.6 Channel busy threshold for urgent release baseband...........................2-1384
2.32 Bvc (GBvc) .................................................................................................2-1385
2.32.1 Bvc ID ..............................................................................................2-1385
2.32.2 BvcI..................................................................................................2-1385
2.32.3 FR NSE DN ......................................................................................2-1387
2.32.4 IP NSE DN........................................................................................2-1388
2.33 GPRS Configuration(GCellPs)......................................................................2-1388
2.33.1 GPRS Configuration ID......................................................................2-1388
2.33.2 T3168...............................................................................................2-1389
2.33.3 T3192...............................................................................................2-1391
2.33.4 T3193...............................................................................................2-1393

XXXIX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.33.5 DRX mode holding timer ....................................................................2-1395
2.33.6 MAX blocks transmission in each TS ..................................................2-1396
2.33.7 Packet control acknowledgement type ................................................2-1398
2.33.8 Access burst type ..............................................................................2-1399
2.33.9 N3102 decrease step.........................................................................2-1400
2.33.10 N3102 increase step ........................................................................2-1402
2.33.11 N3102 max......................................................................................2-1403
2.33.12 Route area color code......................................................................2-1404
2.33.13 Extended measurement report order.................................................2-1406
2.33.14 Network control order.......................................................................2-1407
2.33.15 CCCH SplitPGCycle support ............................................................2-1408
2.33.16 Packet access priority threshold .......................................................2-1409
2.33.17 Extended paging support .................................................................2-1410
2.33.18 USF granularity ............................................................................... 2-1411
2.33.19 Cell support extended uplink TBF .....................................................2-1412
2.33.20 Extended uplink dynamic allocation support ......................................2-1413
2.33.21 Uplink delay time .............................................................................2-1414
2.33.22 Downlink delay time.........................................................................2-1415
2.33.23 Extended uplink TBF time ................................................................2-1416
2.33.24 RRBP Interval of GPRS downlink TBF ..............................................2-1417
2.33.25 Interval number of uplink GPRS TBFs ACK ......................................2-1418
2.33.26 Uplink measurement report period ....................................................2-1419
2.33.27 T3142 .............................................................................................2-1420
2.33.28 T3172 .............................................................................................2-1421
2.33.29 Max times of packet assignment resend............................................2-1422
2.33.30 Enable no data during extended uplink TBF mode .............................2-1424
2.33.31 Initial Coding Scheme of GPRS uplink TBF .......................................2-1425
2.33.32 Initial Coding Scheme of GPRS downlink TBF...................................2-1426
2.33.33 Maximum coding scheme of GPRS uplink TBF..................................2-1427
2.33.34 Maximum coding scheme of GPRS downlink TBF .............................2-1428
2.33.35 PS preemption support ....................................................................2-1429
2.33.36 PS queuing support .........................................................................2-1430
2.33.37 Resource adjust threshold................................................................2-1431
2.33.38 GDpiAppSrv DN ..............................................................................2-1432
2.33.39 Downlink TBF pre-establish support..................................................2-1433
2.33.40 PS channel alloc reduction support ...................................................2-1434
2.33.41 Initial limit threshold of PDTCH alloc .................................................2-1435

XL

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.33.42 Medium limit threshold of PDTCH alloc .............................................2-1436
2.33.43 Maximum limit threshold of PDTCH alloc...........................................2-1437
2.33.44 Damping of PDTCH alloc from limit to non-limit..................................2-1438
2.33.45 GPRS phones init. Code can be changed .........................................2-1439
2.33.46 Maximal resource for POC service....................................................2-1440
2.33.47 Gprs Initial access rate.....................................................................2-1442
2.33.48 Downlink Delay Signal TBF Time......................................................2-1442
2.33.49 Extended uplink Signal TBF time ......................................................2-1443
2.33.50 Support splitting uplink tcp ack datagram ..........................................2-1444
2.33.51 Support copying uplink tcp ack datagram ..........................................2-1445
2.33.52 Support discarding duplicate uplink tcp ack datagram ........................2-1446
2.33.53 TrxPSBusyThs ................................................................................2-1447
2.33.54 Cn ..................................................................................................2-1449
2.33.55 Nn ..................................................................................................2-1451
2.33.56 Xn ..................................................................................................2-1452
2.33.57 One phase access initial code seletion..............................................2-1454
2.33.58 Initial GPRS code schem at one phase access ..................................2-1455
2.33.59 Indicate Uplink andDownlink RLC Window Size value ....................2-1456
2.33.60 DTM MultiSlot Class 11 extended dynamic assign ............................2-1457
2.33.61 Two phase access initial code seletion ..............................................2-1457
2.33.62 Support downlink five timeslots.........................................................2-1458
2.33.63 Sending PSI13 or not.......................................................................2-1459
2.33.64 Packet NeighbourCell Data message sending times indication........2-1460
2.34 PS Channel Schedule Configuration(GPsChannelSchedule) ..........................2-1461
2.34.1 PS Channel Schedule Configuration ID...............................................2-1461
2.34.2 Minimal number of idle CS channel.....................................................2-1462
2.34.3 PS preempt CS support .....................................................................2-1463
2.34.4 CS subscriber moving support............................................................2-1464
2.34.5 EDGE initial downlink allocation by multislot class1 .............................2-1465
2.34.6 GPRS initial downlink allocation by multislot class1 .............................2-1466
2.34.7 PS channel expand support ...............................................................2-1468
2.34.8 Threshold of idle tch for PS channel expand........................................2-1469
2.34.9 PS busy threshold .............................................................................2-1470
2.34.10 Maximum PS uplink user per ts ........................................................2-1471
2.34.11 Max PS downlink user per TS...........................................................2-1472
2.34.12 Multislot allocation of extended range cell support .............................2-1473
2.34.13 Support CS preempt PS optimization ................................................2-1474

XLI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.34.14 Initial piority direction of multislot capability........................................2-1475
2.34.15 Support the discontinuous PDTCH allocation ....................................2-1476
2.35 GPRS-EDGE Schedule Configuration(GGprsEdgeSchedule) .........................2-1477
2.35.1 GPRS-EDGE Schedule Configuration ID ............................................2-1477
2.35.2 Subscriber occupying other preference channel support ......................2-1478
2.35.3 PS subscriber moving out of other preference channel support.............2-1479
2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving .....................2-1481
2.35.5 Threshold of GPRS/EDGE service moving ..........................................2-1482
2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell ................................2-1483
2.35.7 Allocating weights of EGPRS .............................................................2-1485
2.36 NACC Configuration(GNACC)......................................................................2-1486
2.36.1 NACC Configuration ID......................................................................2-1486
2.36.2 CCN mode support............................................................................2-1487
2.36.3 Cell support system message status flow ............................................2-1488
2.36.4 3G NACC support .............................................................................2-1490
2.37 NC2 Configuration(GCellPsNc2) ..................................................................2-1491
2.37.1 NC2 Configuration ID.........................................................................2-1491
2.37.2 Cell reselection offset in idle...............................................................2-1492
2.37.3 Cell reselection temporary offset in idle ...............................................2-1493
2.37.4 Penalty time of cell reselection in idle..................................................2-1494
2.37.5 Interval of reselecting the same cell in idle ..........................................2-1495
2.37.6 Threshold of HSC signal level in idle...................................................2-1496
2.37.7 HCS Priority in idle ............................................................................2-1497
2.37.8 C31 hysteresis in idle.........................................................................2-1498
2.37.9 GPRS cell reselection hysteresis in idle ..............................................2-1499
2.37.10 Routing reselection hysteresis in idle ................................................2-1500
2.37.11 Random access attempt permitted in idle ..........................................2-1502
2.37.12 Usage of cell reselection offset in idle ...............................................2-1503
2.37.13 GPRS access minimal signal level in idle ..........................................2-1504
2.37.14 HCS exist in idle ..............................................................................2-1505
2.37.15 GPRS MAX initial access signal level in idle ......................................2-1506
2.37.16 Cell reselection offset in transfer .......................................................2-1507
2.37.17 Cell reselection temporary offset in transfer .......................................2-1508
2.37.18 Penalty time of cell reselection in transfer..........................................2-1509
2.37.19 Interval of reselecting the same cell in transfer ..................................2-1510
2.37.20 Threshold of HSC signal level in transfer...........................................2-1512
2.37.21 HCS Priority in transfer ....................................................................2-1513

XLII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.37.22 C31 hysteresis in transfer.................................................................2-1514
2.37.23 GPRS cell reselection hysteresis in transfer ......................................2-1515
2.37.24 Routing reselection hysteresis in idle ................................................2-1516
2.37.25 Random access attempt permitted in transfer ....................................2-1517
2.37.26 Usage of cell reselection offset in transfer .........................................2-1519
2.37.27 GPRS access minimal signal level in idle ..........................................2-1520
2.37.28 HCS exist in transfer ........................................................................2-1521
2.37.29 GPRS MAX initial access signal level in transfer ................................2-1522
2.37.30 NC hold time in non-drx mode ..........................................................2-1523
2.37.31 Packet idle mode .............................................................................2-1525
2.37.32 Packet transmission mode ...............................................................2-1526
2.37.33 Extended measurement report order.................................................2-1527
2.37.34 Type of extended measurement report ..............................................2-1528
2.37.35 Report period of extended measurement...........................................2-1530
2.37.36 The size of test report's slip window ..................................................2-1531
2.37.37 Minimum measurement reports in slip window to avoid penalty...........2-1532
2.37.38 Enable uplink interference decision in NC2........................................2-1533
2.37.39 Enable downlink interference decision in NC2 ...................................2-1534
2.37.40 P of uplink interference decision in NC2 ............................................2-1535
2.37.41 N of uplink interference decision in NC2 ............................................2-1536
2.37.42 P of downlink interference decision in NC2........................................2-1537
2.37.43 N of downlink interference decision in NC2........................................2-1538
2.37.44 Uplink interference quality offset .......................................................2-1539
2.37.45 Uplink interference level offset..........................................................2-1541
2.37.46 Downlink interference quality offset...................................................2-1542
2.37.47 Downlink interference level offset......................................................2-1544
2.37.48 Num of samples that calculates average of uplink signal level in
NC2 ..................................................................................................2-1546
2.37.49 Num of samples that calculates average of downlink signal level in
NC2 ..................................................................................................2-1547
2.37.50 Num of samples that calculates average of uplink quality level in
NC2 ..................................................................................................2-1548
2.37.51 Num of samples that calculates average of downlink quality level in
NC2 ..................................................................................................2-1549
2.37.52 NC2 mode between 2G and 3G........................................................2-1550
2.37.53 Serving Cell Load Threshold ............................................................2-1551
2.37.54 Serving Cell Capacity Threshold.......................................................2-1552
2.37.55

XLIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Cell reselection control switch

by serving cell traffic busy

.........................................................................................................2-1553
2.37.56 Is Dual-Frequency NC2 Support .......................................................2-1554
2.37.57 Dual-Frequency NC2 Parameter N ...................................................2-1555
2.37.58 Dual-Frequency NC2 Parameter P ...................................................2-1556
2.37.59 Dual-Frequency NC2 TA Threshold ..................................................2-1557
2.37.60 Dual-Frequency NC2 load Threshold ................................................2-1558
2.37.61 NC2 UL RxLevel Threshold ..............................................................2-1560
2.37.62 NC2 DL RxLevel Threshold ..............................................................2-1561
2.37.63 NC2 UL RxQual Threshold...............................................................2-1562
2.37.64 NC2 DL RxQual Threshold...............................................................2-1563
2.37.65 avoid Ping-Pang cell reselection Timer..............................................2-1564
2.37.66 NC2 Reselection hysteresis Threshold..............................................2-1565
2.37.67 NC2 reselection DL RxLevel Threshold.............................................2-1567
2.37.68 NC2 Distance Windows ...................................................................2-1568
2.37.69 Downlink RxQual N Value ................................................................2-1569
2.37.70 Downlink RxQual Criteria .................................................................2-1569
2.37.71 Downlink RxLev P Value ..................................................................2-1570
2.37.72 Downlink RxLev N Value ..................................................................2-1571
2.37.73 Downlink RxLev Criteria ...................................................................2-1572
2.37.74 Distance P Value .............................................................................2-1573
2.37.75 Distance N Value .............................................................................2-1574
2.37.76 Distance Criteria..............................................................................2-1575
2.37.77 Cell reselection by traffic ..................................................................2-1576
2.37.78 Cell change failure penalty time ........................................................2-1577
2.37.79 Cell change failure penalty level offset ..............................................2-1578
2.37.80 Uplink RxQual P Value.....................................................................2-1579
2.37.81 Uplink RxQual N Value.....................................................................2-1580
2.37.82 Uplink RxQual Criteria .....................................................................2-1581
2.37.83 Uplink RxLev P Value ......................................................................2-1582
2.37.84 Uplink RxLev N Value ......................................................................2-1582
2.37.85 Uplink RxLev Criteria .......................................................................2-1583
2.37.86 Traffic cell change threshold .............................................................2-1584
2.37.87 PBGT P Value .................................................................................2-1585
2.37.88 PBGT N Value.................................................................................2-1586
2.37.89 PBGT Criteria..................................................................................2-1587

XLIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.37.90 Invalid reassign time ........................................................................2-1588
2.37.91 Invalid reassign maximum times .......................................................2-1589
2.37.92 Indication for sending PNCD before NC2 PCCO................................2-1590
2.37.93 Downlink RxQual P Value ................................................................2-1591
2.38 DTM Configuration(GDTM) ..........................................................................2-1592
2.38.1 DTM Configuration ID ........................................................................2-1592
2.38.2 DTM support .....................................................................................2-1593
2.38.3 Support enhanced DTM capability ......................................................2-1594
2.38.4 Max number of GTTP lapdm frame.....................................................2-1595
2.39 PS Power Control(GPsPowerControl) ...........................................................2-1597
2.39.1 PS Power Control ID..........................................................................2-1597
2.39.2 Uplink power control strategy .............................................................2-1597
2.39.3 Downlink power control strategy .........................................................2-1599
2.39.4 Expected signal intensity of MS ..........................................................2-1600
2.39.5 Downlink Power Control Mode ...........................................................2-1601
2.39.6 Power Control Level ..........................................................................2-1602
2.39.7 Power descending of PDCH to BCCH in a mode .................................2-1603
2.39.8 Power control parameter....................................................................2-1604
2.39.9 Filter period in the packet idle mode ...................................................2-1605
2.39.10 Filter period in packet transmission mode..........................................2-1606
2.39.11 Power control measurement channel ................................................2-1607
2.39.12 Filter constant of power control .........................................................2-1608
2.39.13 Max power reduction of CS1 ............................................................2-1609
2.39.14 Max power reduction of CS2 ............................................................2-1610
2.39.15 Max power reduction of CS3 ............................................................ 2-1611
2.39.16 Max power reduction of CS4 ............................................................2-1612
2.39.17 Max power reduction of MCS1..........................................................2-1612
2.39.18 Max power reduction of MCS2..........................................................2-1613
2.39.19 Max power reduction of MCS3..........................................................2-1614
2.39.20 Max power reduction of MCS4..........................................................2-1615
2.39.21 Max power reduction of MCS5..........................................................2-1616
2.39.22 Max power reduction of MCS6..........................................................2-1617
2.39.23 Max power reduction of MCS7..........................................................2-1618
2.39.24 Max power reduction of MCS8..........................................................2-1619
2.39.25 Max power reduction of MCS9..........................................................2-1620
2.39.26 Window of averaging uplink signal ....................................................2-1621
2.39.27 Window of averaging downlink signal................................................2-1622

XLV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.39.28 Window of averaging uplink quality ...................................................2-1623
2.39.29 Window of averaging downlink quality ...............................................2-1624
2.39.30 Threshold of uplink signal for increasing power..................................2-1625
2.39.31 Threshold of downlink signal for increasing power .............................2-1626
2.39.32 Threshold of uplink signal for decreasing power.................................2-1627
2.39.33 Threshold of downlink signal for decreasing power ............................2-1629
2.39.34 Threshold of uplink MEAN_BEP for increasing power in GPRS ..........2-1630
2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS ...............2-1631
2.39.36 Threshold of downlink quality for increasing power in GPRS...............2-1632
2.39.37 Threshold of uplink MEAN_BEP for decreasing power in GPRS .........2-1633
2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS ..............2-1634
2.39.39 Threshold of downlink quality for decreasing power in GPRS .............2-1635
2.39.40 Threshold of uplink MEAN_BEP for increasing power in EDGE ..........2-1636
2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE ...............2-1637
2.39.42 Threshold of downlink MEAN_BEP for increasing power in EDGE ......2-1638
2.39.43 Threshold of downlink CV_BEP for increasing power in EDGE ...........2-1639
2.39.44 Threshold of uplink MEAN_BEP for decreasing power in EDGE .........2-1641
2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE ..............2-1642
2.39.46 Threshold of downlink MEAN_BEP for decreasing power in EDGE ......2-1643
2.39.47 Threshold of downlink CV_BEP for decreasing power in EDGE ..........2-1644
2.39.48 N of uplink signal for increasing power ..............................................2-1645
2.39.49 N of downlink signal for increasing power ..........................................2-1646
2.39.50 N of uplink signal for decreasing power .............................................2-1647
2.39.51 N of downlink signal for decreasing power.........................................2-1648
2.39.52 N of uplink quality for increasing power in GPRS ...............................2-1649
2.39.53 N of downlink quality for increasing power in GPRS ...........................2-1650
2.39.54 N of uplink quality for decreasing power in GPRS ..............................2-1651
2.39.55 N of downlink quality for decreasing power in GPRS ..........................2-1652
2.39.56 N of uplink quality for increasing power in EDGE ...............................2-1653
2.39.57 N of downlink quality for increasing power in EDGE ...........................2-1654
2.39.58 N of uplink quality for decreasing power in EDGE ..............................2-1655
2.39.59 N of downlink quality for decreasing power in EDGE ..........................2-1656
2.39.60 P of uplink signal for increasing power ..............................................2-1657
2.39.61 P of downlink signal for increasing power ..........................................2-1658
2.39.62 P of uplink signal for decreasing power .............................................2-1659
2.39.63 P of downlink signal for decreasing power .........................................2-1660
2.39.64 P of uplink quality for increasing power in GPRS ...............................2-1661

XLVI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.39.65 P of downlink quality for increasing power in GPRS ...........................2-1662
2.39.66 P of uplink quality for decreasing power in GPRS ..............................2-1663
2.39.67 P of downlink quality for decreasing power in GPRS ..........................2-1664
2.39.68 P of uplink quality for increasing power in EDGE ...............................2-1665
2.39.69 P of downlink quality for increasing power in EDGE ...........................2-1667
2.39.70 P of uplink quality for decreasing power in EDGE ..............................2-1668
2.39.71 P of downlink quality for decreasing power in EDGE ..........................2-1669
2.39.72 Step of uplink power increase...........................................................2-1670
2.39.73 Step of uplink power decrease..........................................................2-1671
2.39.74 Step of downlink power increase ......................................................2-1672
2.39.75 Step of downlink power decrease .....................................................2-1673
2.39.76 Mode of downlink closed loop power control......................................2-1674
2.39.77 lowest CS of enabling downlink power control in GPRS .....................2-1675
2.39.78 lowest MCS of enabling downlink power control in EDGE...................2-1676
2.39.79 try to decrease downlink power ........................................................2-1678
2.39.80 reduced power of dummy usf in good uplink radio condition ...............2-1679
2.39.81 reduced power of dummy usf in general uplink radio condition............2-1680
2.39.82 reduced power of dummy usf in bad uplink radio condition .................2-1681
2.40 EDGE Configuration(GCellEdge)..................................................................2-1683
2.40.1 EDGE Configuration ID......................................................................2-1683
2.40.2 EGPRS packet channel request access program support.....................2-1684
2.40.3 Uplink LA+IR quality control support ...................................................2-1685
2.40.4 Take Preemptive transmit bit function..................................................2-1686
2.40.5 Average filter period for uplink BEP ....................................................2-1687
2.40.6 Average filter period for downlink BEP ................................................2-1688
2.40.7 EGPRS phone quality measure mode.................................................2-1690
2.40.8 EGPRS uplink init. Coding scheme ....................................................2-1691
2.40.9 EGPRS downlink init. Coding scheme ................................................2-1692
2.40.10 EGPRS uplink max. coding scheme .................................................2-1693
2.40.11 EGPRS downlink max. coding scheme .............................................2-1694
2.40.12 edge Initial access rate ....................................................................2-1695
2.40.13 EGPRS phones init. Code can be changed .......................................2-1696
2.40.14 Bep_Period2 of uplink......................................................................2-1697
2.40.15 Bep_Period2 of downlink..................................................................2-1698
2.40.16 Interval number of downlink EGPRS TBFs RRBP .............................2-1699
2.40.17 Interval number of uplink EGPRS TBFs ACK ....................................2-1700
2.40.18 Initial EGPRS code schem at one phase access................................2-1701

XLVII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.41 Enhanced EDGE Configuration(GEhancedEdge) ..........................................2-1702
2.41.1 Enhanced EDGE Configuration ID ......................................................2-1702
2.41.2 EGPRS2-A uplink initial coding scheme ..............................................2-1703
2.41.3 EGPRS2-A downlink initial coding scheme..........................................2-1705
2.41.4 EGPRS2-A uplink maximum coding scheme .......................................2-1706
2.41.5 EGPRS2-A downlink maximum coding scheme...................................2-1707
2.41.6 FANR TBF support ............................................................................2-1708
2.41.7 DLDC support ...................................................................................2-1709
2.41.8 RTTI support .....................................................................................2-1710
2.41.9 Enable event-based FANR in downlink TBF ........................................ 2-1711
2.41.10 Enable reduced latency access ........................................................2-1712
2.41.11 Encoding mode of PAN in uplink TBF ................................................2-1713
2.42 Serving Cell CRRM Configuration(GCrrmCellLd) ...........................................2-1714
2.42.1 Serving Cell CRRM Configuration ID ..................................................2-1714
2.42.2 Uplink Load Low Threshold ................................................................2-1715
2.42.3 Uplink Load Medium Threshold ..........................................................2-1716
2.42.4 Uplink Load High Threshold ...............................................................2-1717
2.42.5 Downlink Load Low Threshold............................................................2-1718
2.42.6 Downlink Load Medium Threshold ......................................................2-1719
2.42.7 Downlink Load High Threshold ...........................................................2-1720
2.42.8 Real Time Uplink Load Low Threshold ................................................2-1721
2.42.9 Real Time Uplink Load Medium Threshold ..........................................2-1722
2.42.10 Real Time Uplink Load High Threshold .............................................2-1723
2.42.11 Real Time Downlink Load Low Threshold ..........................................2-1724
2.42.12 Real Time Downlink Load Medium Threshold ....................................2-1725
2.42.13 Real Time Downlink Load High Threshold .........................................2-1726
2.42.14 Not Real Time Uplink Load Low Threshold ........................................2-1727
2.42.15 Not Real Time Uplink Load Medium Threshold ..................................2-1727
2.42.16 Not Real Time Uplink Load High Threshold .......................................2-1728
2.42.17 Not Real Time Downlink Load Low Threshold....................................2-1729
2.42.18 Not Real Time Downlink Load Medium Threshold ..............................2-1730
2.42.19 Not Real Time Downlink Load High Threshold ...................................2-1731
2.43 SubCell(GSubCell) ......................................................................................2-1732
2.43.1 SubCell ID ........................................................................................2-1732
2.43.2 SubCell Sequence.............................................................................2-1733
2.43.3 Frequency Band of SubCell................................................................2-1734
2.44 Subcell Handover Control(GScHandoverControl) ..........................................2-1735

XLVIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.44.1 COBCCH Handover Control ID...........................................................2-1735
2.44.2 PBGT handover start threshold of subcell2 .........................................2-1736
2.44.3 The load of HO from AMR FR to AMR HR in subcell2 ..........................2-1737
2.44.4 The load of HO from FR to HR(V1) in subcell2 ....................................2-1738
2.44.5 SubCell handover algorithm(High Speed)............................................2-1739
2.44.6 SubCell handover algorithm(Middle Speed).........................................2-1740
2.44.7 SubCell handover algorithm(Low Speed) ............................................2-1741
2.44.8 The MAX of path loss ........................................................................2-1742
2.44.9 The MIN of path loss..........................................................................2-1744
2.44.10 The MAX of time advance ................................................................2-1745
2.44.11 The MIN of time advance .................................................................2-1745
2.44.12 Inter Site handover to SubCell2 permitted .........................................2-1746
2.44.13 Measure BCCH when in subcell2......................................................2-1747
2.44.14 Good C/I .........................................................................................2-1748
2.44.15 Good value P ..................................................................................2-1750
2.44.16 Good value N ..................................................................................2-1751
2.44.17 Bad C/I ...........................................................................................2-1752
2.44.18 Bad value P ....................................................................................2-1753
2.44.19 Bad value N ....................................................................................2-1754
2.44.20 Handover Parameter N of SubCell1 ..................................................2-1755
2.44.21 Handover Parameter P of SubCell1 ..................................................2-1756
2.44.22 Handover Parameter N of SubCell2 ..................................................2-1757
2.44.23 Handover Parameter P of SubCell2 ..................................................2-1758
2.44.24 SubCell2 To SubCell1 Handover Threshold .......................................2-1759
2.44.25 Traffic Threshold of Handover in SubCell1.........................................2-1761
2.44.26 Traffic Threshold of Handover out SubCell1 ......................................2-1762
2.44.27 The load of HO from HRV1 to FR for Subcell2............................2-1763
2.44.28 The load of HO from HRV3 to FR for Subcell2............................2-1764
2.45 SubCell PS Channel Allocation Configuration(GSubCellPsAlloc) ....................2-1765
2.45.1 SubCell PS Channel Allocation Configuration ID .................................2-1765
2.45.2 SubCell selection of PS channel allocation..........................................2-1766
2.45.3 RXLEV threshold in SubCell 1............................................................2-1768
2.45.4 RXLEV threshold in SubCell 2............................................................2-1769
2.45.5 RxLev P Value ..................................................................................2-1770
2.45.6 RxLev N Value ..................................................................................2-1771
2.45.7 TA threshold for PS channel allocate in SubCell1 ................................2-1772
2.45.8 TA threshold for PS channel allocate in SubCell2 ................................2-1773

XLIX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.45.9 TA P Value ........................................................................................2-1774
2.45.10 TA N Value ......................................................................................2-1775
2.45.11 SubCell1 PS Busy Threshold............................................................2-1776
2.45.12 SubCell2 PS Busy Threshold ...........................................................2-1777
2.46 Power Control(GPowerControl) ....................................................................2-1778
2.46.1 Power Control ID ...............................................................................2-1778
2.46.2 GSubCell DN ....................................................................................2-1779
2.46.3 Uplink level Sample count ..................................................................2-1780
2.46.4 Uplink level Weight ............................................................................2-1781
2.46.5 Downlink level Sample count..............................................................2-1782
2.46.6 Downlink level Weight........................................................................2-1783
2.46.7 Uplink quality Sample count ...............................................................2-1784
2.46.8 Uplink quality Weight .........................................................................2-1785
2.46.9 Downlink quality Sample count ...........................................................2-1786
2.46.10 Downlink quality Weight ...................................................................2-1787
2.46.11 Uplink power control allowed ............................................................2-1788
2.46.12 Downlink power control allowed........................................................2-1789
2.46.13 Increase step of uplink power control ................................................2-1791
2.46.14 Decrease step of uplink power control...............................................2-1792
2.46.15 Increase uplink level Threshold ........................................................2-1793
2.46.16 Decrease uplink level Threshold .......................................................2-1794
2.46.17 Increase uplink quality Threshold......................................................2-1795
2.46.18 Decrease uplink quality Threshold ....................................................2-1796
2.46.19 Increase downlink level Threshold ....................................................2-1798
2.46.20 Decrease downlink level Threshold...................................................2-1799
2.46.21 Increase downlink quality Threshold .................................................2-1800
2.46.22 Decrease downlink quality Threshold ................................................2-1801
2.46.23 Increase uplink level Value P ............................................................2-1802
2.46.24 Increase uplink level Value N............................................................2-1803
2.46.25 Increase downlink level Value P........................................................2-1805
2.46.26 Increase downlink level Value N .......................................................2-1806
2.46.27 Decrease uplink level Value P ..........................................................2-1807
2.46.28 Decrease uplink level Value N ..........................................................2-1808
2.46.29 Decrease downlink level Value P ......................................................2-1809
2.46.30 Decrease downlink level Value N ......................................................2-1810
2.46.31 Increase uplink quality Value P ......................................................... 2-1811
2.46.32 Increase uplink quality Value N .........................................................2-1812

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.46.33 Increase downlink quality Value P.....................................................2-1813
2.46.34 Increase downlink quality Value N.....................................................2-1814
2.46.35 Decrease uplink quality Value P........................................................2-1815
2.46.36 Decrease uplink quality Value N .......................................................2-1816
2.46.37 Decrease downlink quality Value P ...................................................2-1817
2.46.38 Decrease downlink quality Value N ...................................................2-1818
2.46.39 MAX power level of MS....................................................................2-1819
2.46.40 MIN power level of MS .....................................................................2-1820
2.46.41 MIN power level of BS .....................................................................2-1821
2.46.42 Uplink rapid power control ................................................................2-1822
2.46.43 Downlink rapid power control............................................................2-1823
2.46.44 MIN interval of power control ............................................................2-1824
2.46.45 Power control PwrDecrLimit .............................................................2-1826
2.46.46 Report period of measurement for power control ...............................2-1827
2.46.47 BCCH power control downlink ..........................................................2-1828
2.46.48 BCCH maxim power decrease..........................................................2-1829
2.46.49 BCCH idle burst power.....................................................................2-1830
2.46.50 Uplink exponential filter ....................................................................2-1832
2.46.51 Downlink exponential filter................................................................2-1833
2.46.52 Uplink level optimize ........................................................................2-1834
2.46.53 Downlink level optimize....................................................................2-1835
2.46.54 Minimize Interval of downlink power control .......................................2-1836
2.46.55 Increase step of downlink power control ............................................2-1837
2.46.56 Decrease step of downlink power control ..........................................2-1838
2.46.57 Urgent Rescue Switch .....................................................................2-1839
2.46.58 Uplink Initial State Effectively Switch .................................................2-1840
2.46.59 Initial State MR Number ...................................................................2-1841
2.46.60 High Level High Quality Effectively Switch ........................................2-1842
2.46.61 Uplink Exponential Filter Cycle .........................................................2-1843
2.46.62 Downlink Exponential Filter Cycle .....................................................2-1844
2.46.63 Uplink Window Filter Weight Sequence ............................................2-1845
2.46.64 Downlink Window Filter Weight Sequence ........................................2-1846
2.46.65 Uplink Level Urgent Rescue Threshold .............................................2-1847
2.46.66 Downlink Level Urgent Rescue Threshold .........................................2-1848
2.46.67 Uplink Quality Urgent Rescue Threshold ...........................................2-1849
2.46.68 Downlink Quality Urgent Rescue Threshold.......................................2-1850
2.46.69 N of Urgent Rescue .........................................................................2-1851

LI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.46.70 P of Urgent Rescue .........................................................................2-1852
2.46.71 Uplink Power Reduce Level Margin ..................................................2-1853
2.46.72 Downlink Power Reduce Level Margin ..............................................2-1855
2.46.73 Initial State Power Decrease Limit ....................................................2-1856
2.46.74 Uplink Power Decrease Limit of Quality rank ....................................2-1857
2.46.75 Downlink Power Decrease Limit of Quality rank ................................2-1858
2.46.76 Uplink Power decrease Maximum Step of Quality 0 ...........................2-1859
2.46.77 Downlink Power decrease Maximum Step of Quality 0 .......................2-1860
2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2 ..................2-1861
2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2..............2-1862
2.46.80 Uplink Power decrease Maximum Step of other Quality .....................2-1863
2.46.81 Downlink Power decrease Maximum Step of other Quality .................2-1864
2.46.82 Downlink power control RQ target.....................................................2-1865
2.46.83 Downlink power control RQ length ....................................................2-1865
2.46.84 Downlink power control rescue .........................................................2-1866
2.46.85 Downlink power control new filter interval ..........................................2-1867
2.46.86 Downlink power control new filter......................................................2-1868
2.46.87 Downlink power control level weight..................................................2-1869
2.46.88 Downlink power control level target...................................................2-1870
2.46.89 Downlink power control level length ..................................................2-1871
2.46.90 Downlink power control increase decrease........................................2-1872
2.46.91 Downlink good level bad quality .......................................................2-1873
2.46.92 Uplink power control RQ weight........................................................2-1874
2.46.93 Uplink power control RQ target .........................................................2-1875
2.46.94 Uplink power control RQ length ........................................................2-1876
2.46.95 Uplink power control new filter interval ..............................................2-1876
2.46.96 Uplink power control new filter ..........................................................2-1877
2.46.97 Uplink power control level weight ......................................................2-1878
2.46.98 Uplink power control level target .......................................................2-1879
2.46.99 Uplink power control level length ......................................................2-1881
2.46.100 Uplink power control increase decrease ..........................................2-1881
2.46.101 Uplink good level bad quality .........................................................2-1882
2.46.102 The different increase downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-1883
2.46.103 The different decrease downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-1884
2.46.104 Power control new filter para2 ........................................................2-1885
2.46.105 Power control new filter para1 ........................................................2-1886

LII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.46.106 Downlink rescue quality threshold ...................................................2-1887
2.46.107 Downlink rescue level threshold......................................................2-1888
2.46.108 Downlink power control RQ weight..................................................2-1889
2.47 Power Share(GPwShare).............................................................................2-1890
2.47.1 Power Share ID.................................................................................2-1890
2.47.2 Cell enable power dynamic sharing or not ...........................................2-1891
2.47.3 Power adjustment methods priority .....................................................2-1892
2.47.4 Power reserved for present users .......................................................2-1893
2.47.5 Power Adjusting Threshold ................................................................2-1894
2.47.6 Threshold for Increase 8PSK Power ...................................................2-1895
2.47.7 Hysteresis for Increase 8PSK Power ..................................................2-1897
2.47.8 Delay for Increase 8PSK Power .........................................................2-1898
2.47.9 Delay for Resume PDTCH Power.......................................................2-1899
2.48 PS Handover Control(GPsHandoverControl) .................................................2-1900
2.48.1 PS Handover Control ID.....................................................................2-1900
2.48.2 PS handover support .........................................................................2-1901
2.48.3 ACK of PS handover command ..........................................................2-1902
2.48.4 Blind transmission support .................................................................2-1902
2.48.5 Optimized handover support ..............................................................2-1903
2.48.6 Send handover access in synchronized handover ...............................2-1904
2.48.7 Send handover access in pre-synchronized handover..........................2-1905
2.48.8 Reset RLC ........................................................................................2-1907
2.48.9 Trigger PS handover by PCCN...........................................................2-1908
2.48.10 Number of zero allowed in AV...........................................................2-1909
2.48.11 Uplink power level Sample count ......................................................2-1910
2.48.12 Downlink power level Sample count.................................................. 2-1911
2.48.13 Uplink quality Sample count .............................................................2-1912
2.48.14 Downlink quality Sample count .........................................................2-1913
2.48.15 Distance .........................................................................................2-1914
2.48.16 Neighboring cell...............................................................................2-1915
2.48.17 Uplink receive level Threshold ..........................................................2-1916
2.48.18 Uplink receive level Value P .............................................................2-1918
2.48.19 Uplink receive level Value N .............................................................2-1919
2.48.20 Downlink receive level Threshold......................................................2-1920
2.48.21 Downlink receive level Value P .........................................................2-1921
2.48.22 Downlink receive level Value N .........................................................2-1923
2.48.23 Uplink receive quality Threshold .......................................................2-1924

LIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.48.24 Uplink receive quality Value P...........................................................2-1925
2.48.25 Uplink receive quality Value N ..........................................................2-1926
2.48.26 Downlink receive quality Threshold ...................................................2-1928
2.48.27 Downlink receive quality Value P ......................................................2-1929
2.48.28 Downlink receive quality Value N ......................................................2-1930
2.48.29 Uplink receive level of intra-ho Threshold ..........................................2-1931
2.48.30 Uplink receive level of intra-ho Value P .............................................2-1933
2.48.31 Uplink receive level of intra-ho Value N .............................................2-1934
2.48.32 Downlink receive level of intra-ho Threshold......................................2-1935
2.48.33 Downlink receive level of intra-ho Value P .........................................2-1936
2.48.34 Downlink receive level of intra-ho Value N .........................................2-1938
2.48.35 Rapid handover Threshold ...............................................................2-1939
2.48.36 Rapid handover Value N ..................................................................2-1940
2.48.37 Macro to micro handover Threshold..................................................2-1941
2.48.38 Macro to micro handover Value N .....................................................2-1942
2.48.39 Max time advance threshold between MS and BTS ...........................2-1943
2.48.40 Distance handover Value P ..............................................................2-1944
2.48.41 Distance handover Value N ..............................................................2-1945
2.48.42 PBGT handover Value P ..................................................................2-1946
2.48.43 PBGT handover Value N ..................................................................2-1947
2.48.44 MIN interval between inter-cell handover...........................................2-1948
2.48.45 Prior layer selecting parameter on signal level/quality ........................2-1950
2.48.46 Handover to same layer other band neighbour cell for PBGT
permitted ...........................................................................................2-1951
2.48.47 Handover to neighbour cell with no Layer Relation for PBGT
permitted ...........................................................................................2-1952
2.48.48 Handover to upper layer neighbour cell for PBGT permitted ...............2-1953
2.48.49 Handover to under layer neighbor cell for PBGT permitted .................2-1954
2.48.50 Synchronism ..................................................................................2-1955
2.48.51 Asynchronism .................................................................................2-1956
2.48.52 Pseudo-synchronism (HoPatternInd_2).............................................2-1957
2.48.53 Pre-synchronism (HoPatternInd_3) ...................................................2-1958
2.48.54 Allow intra-Cell handover attempt due to uplink interference ...............2-1959
2.48.55 Allow intra-Cell handover attempt due to downlink interference...........2-1960
2.48.56 Allow standard PBGT handover........................................................2-1961
2.48.57 Allow handover due to distance ........................................................2-1961
2.48.58 Allow automatic handover based on traffic.........................................2-1962
2.48.59 Enable rapid handover .....................................................................2-1963

LIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.48.60 Enable macro to micro handover ......................................................2-1964
2.48.61 Enable queue in handover ...............................................................2-1965
2.48.62 Enable queue in handover preemption in handover............................2-1966
2.48.63 Penalty time for handover failure ......................................................2-1967
2.48.64 Layer control value for handover on traffic .........................................2-1968
2.48.65 Frequency control value for handover on traffic..................................2-1969
2.48.66 Threshold of traffic for handover .......................................................2-1971
2.48.67 Traffic handover threshold ................................................................2-1972
2.48.68 Level offset during penalty................................................................2-1973
2.48.69 Uplink interference quality offset .......................................................2-1974
2.48.70 Uplink interference level offset..........................................................2-1975
2.48.71 Downlink interference quality offset...................................................2-1976
2.48.72 Downlink interference level offset......................................................2-1977
2.48.73 Invalid intra-handover time ...............................................................2-1979
2.48.74 MAX count of invalid intra-handover..................................................2-1980
2.49 Trx(GTrx) ....................................................................................................2-1981
2.49.1 TRX ID .............................................................................................2-1981
2.49.2 TRX Sequence..................................................................................2-1982
2.49.3 GBtsPanel DN...................................................................................2-1983
2.49.4 GSubCell DN ....................................................................................2-1983
2.49.5 TRX type ..........................................................................................2-1984
2.49.6 Static power level ..............................................................................2-1985
2.49.7 Assign Priority of the Trx ....................................................................2-1987
2.49.8 Power level .......................................................................................2-1988
2.49.9 Pair Trx.............................................................................................2-1989
2.49.10 RTTI preference ..............................................................................2-1990
2.49.11 TSC ................................................................................................2-1991
2.49.12 TSC2 ..............................................................................................2-1992
2.49.13 ARFCN ...........................................................................................2-1993
2.49.14 GHoppingFrequency DN ..................................................................2-1994
2.49.15 GHoppingBaseband DN...................................................................2-1995
2.49.16 BCCH Mark.....................................................................................2-1995
2.49.17 Combiner Loss ................................................................................2-1996
2.49.18 HoppingFrequency MAIO.................................................................2-1997
2.49.19 Support TS freq-hopping ..................................................................2-1999
2.50 Ts(GTs).......................................................................................................2-2000
2.50.1 Ts ID.................................................................................................2-2000

LV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.50.2 TS Sequence ....................................................................................2-2000
2.50.3 TS Channel Combination ...................................................................2-2001
2.50.4 MAIO................................................................................................2-2003
2.50.5 Dynamic TS ......................................................................................2-2005
2.50.6 Ps Service Preference Property..........................................................2-2006
2.50.7 Pair No. ............................................................................................2-2007
2.50.8 USF Mode Used In RTTI....................................................................2-2008
2.50.9 PDCH Precedence ............................................................................2-2009
2.50.10 GHoppingFrequency DN .................................................................. 2-2011
2.51 Adjacent GSM Cell Configuration(GGsmRelation) .........................................2-2012
2.51.1 Relation type.....................................................................................2-2012
2.51.2 Adjacent GSM Cell Configuration ID ...................................................2-2013
2.51.3 DN of source Gsmcell ........................................................................2-2013
2.51.4 DN of source ExternalGsmcell............................................................2-2014
2.51.5 Relation Sequence ............................................................................2-2015
2.51.6 Priority of handover ...........................................................................2-2016
2.51.7 MIN power level for handover access .................................................2-2017
2.51.8 MIN threshold of signal level for handover on PBGT ............................2-2020
2.51.9 MIN threshold of signal level for handover on power level ....................2-2022
2.51.10 MIN threshold of signal level for handover on quality..........................2-2023
2.51.11 Is related cell ...................................................................................2-2024
2.51.12 Neighboring cell layer ......................................................................2-2025
2.51.13 Is handover forced neighbor cell .......................................................2-2027
2.51.14 MAX level difference of force handover .............................................2-2028
2.51.15 Handover force resource threshold ...................................................2-2029
2.51.16 Macro to micro handover Threshold..................................................2-2030
2.51.17 Macro to micro handover Value N .....................................................2-2032
2.51.18 Target cell traffic threshold................................................................2-2033
2.51.19 CS adjacent cell report priority..........................................................2-2034
2.51.20 PS adjacent cell report priority ..........................................................2-2035
2.51.21 The direction of neighbour cell for downlink rapid handover ................2-2037
2.51.22 Minimum RX level(PS) .....................................................................2-2038
2.51.23 Margin of PBGT handover(PS) .........................................................2-2041
2.51.24 Margin of RX handover(PS) .............................................................2-2042
2.51.25 Margin of quality handover(PS) ........................................................2-2043
2.51.26 Is related cell(PS) ............................................................................2-2044
2.51.27 Handover priority(PS) ......................................................................2-2045

LVI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.51.28 Max TX power of MS(PS).................................................................2-2046
2.51.29 Traffic threshold of target cell(PS) .....................................................2-2047
2.51.30 Threshold of macro to micro handover(PS) .......................................2-2048
2.51.31 Counter of macro to micro handover(PS) ..........................................2-2050
2.51.32 The number of C/I limited cell ...........................................................2-2051
2.51.33 The objectID list of C/I limited cell .....................................................2-2052
2.51.34 The threshold list of C/I limited cell....................................................2-2053
2.51.35 Downlink rapid handover threshold ...................................................2-2054
2.51.36 Downlink rapid handover N ..............................................................2-2055
2.51.37 exclusive cell fro high speed ............................................................2-2056
2.51.38 CCN support ...................................................................................2-2057
2.51.39 Is the directed retry ncell ..................................................................2-2059
2.51.40 PBGT handover margin of subcell2...................................................2-2060
2.51.41 Rx level handover margin of subcell2................................................2-2061
2.51.42 Rx quality handover margin of subcell2 .............................................2-2062
2.51.43 Min Rx level of Neighbour Cell for subcell2........................................2-2064
2.51.44 Target cell traffic threshold of Subcell2 ..............................................2-2067
2.51.45 Handover Priority Indication when serve cell shuttingdown .................2-2068
2.51.46 Is The Related Cell In dual- Frequency Network ................................2-2069
2.51.47 Downlink rapid handover threshold for SDCCH..................................2-2070
2.51.48 Downlink rapid handover N for SDCCH.............................................2-2072
2.51.49 Good level and bad quality handover NCell MARGIN.........................2-2073
2.51.50 Forbid Period For non-Emergency Handover.....................................2-2074
2.51.51 Forbid Period For Emergency Handover ...........................................2-2075
2.51.52 Cell reselection priority.....................................................................2-2077
2.51.53 Avoid Ping-Pang cell reselection Timer .............................................2-2078
2.51.54 Target cell traffic threshold................................................................2-2078
2.51.55 Penalty Period For non-Emergency Handover ...................................2-2079
2.51.56 Penalty Period For Emergency Handover..........................................2-2081
2.51.57 Penalty Level For non-Emergency Handover.....................................2-2082
2.51.58 Penalty Level For Emergency Handover ...........................................2-2084
2.51.59 NC2 RxQual margin.........................................................................2-2085
2.51.60 NC2 RxLev margin ..........................................................................2-2086
2.51.61 NC2 Reselection hysteresis Threshold..............................................2-2087
2.51.62 NC2 reselection DL RxLevel Threshold.............................................2-2088
2.51.63 NC2 PBGT margin...........................................................................2-2089
2.51.64 NC2 neighbour cell RXLEV_ACCESS_MIN.......................................2-2090

LVII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.51.65 NC2 neighbour cell MS_TXPWR_MAX .............................................2-2091
2.52 Interfere Gsm Cell Configuration(GGsmIntfRelation)......................................2-2092
2.52.1 Interfere Gsm Cell Configuration ID ....................................................2-2092
2.52.2 GsmIntfRelation Sequence ................................................................2-2093
2.52.3 GGsmCell DN ...................................................................................2-2094
2.52.4 GExternalGsmCell DN .......................................................................2-2094
2.53 Visit Paging Cell(GGsmVpcRelation) ............................................................2-2095
2.53.1 Visit Paging Cell ID............................................................................2-2095
2.53.2 VPC Id..............................................................................................2-2096
2.53.3 DN of GGsmCell ...............................................................................2-2097
2.54 Adjacent UTRAN Cell Configuration(GUtranRelation) ....................................2-2098
2.54.1 UTRAN Relation type ........................................................................2-2098
2.54.2 Adjacent UTRAN Cell Configuration ID ...............................................2-2099
2.54.3 DN of UTRAN FDD source cell...........................................................2-2100
2.54.4 DN of UTRAN TDD source cell...........................................................2-2101
2.54.5 UTRAN Relation Sequence................................................................2-2102
2.54.6 RSCP offset handover to UTRAN adjacent cell....................................2-2103
2.54.7 Ec/No offset handover to UTRAN adjacent cell....................................2-2104
2.54.8 CS adjacent cell report priority............................................................2-2105
2.54.9 PS adjacent cell report priority............................................................2-2107
2.54.10 Target cell traffic threshold................................................................2-2109
2.54.11 RSCP offset .................................................................................... 2-2110
2.54.12 EcNo offset ..................................................................................... 2-2111
2.54.13 Target cell traffic threshold(PS) ......................................................... 2-2112
2.54.14 CCN support ................................................................................... 2-2113
2.54.15 the priority of Utran Cell ................................................................... 2-2114
2.54.16 Is the directed retry ncell .................................................................. 2-2115
2.55 Adjacent E-UTRAN Cell Configuration(GEutranRelation) ............................... 2-2116
2.55.1 Adjacent E-UTRAN Cell Configuration ID ............................................ 2-2116
2.55.2 DN of E-UTRAN FDD source cell ....................................................... 2-2117
2.55.3 DN of E-UTRAN TDD source cell ....................................................... 2-2118
2.55.4 UTRAN Relation Sequence................................................................ 2-2119
2.55.5 the PRIORITY of E-UTRAN cells for the specified EARFCN.................2-2120
2.55.6 CCN support .....................................................................................2-2121
2.55.7 The re-selecting forbid flag of LTE Ncell ..............................................2-2122
2.56 User and Service Resource Schedule(GUserAndSrvBasedSche) ...................2-2123
2.56.1 User and Service Based Resource Schedule ID ..................................2-2123

LVIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.56.2 Support resource optimizing by service ...............................................2-2124
2.56.3 Threshold of PS resource congestion .................................................2-2125
2.56.4 Threshold of relieving PS resource congestion ....................................2-2126
2.57 User Priority and Service Type Configuration(GPsUserAndSrvType)...............2-2128
2.57.1 User Priority and Service Type Configuration ID ..................................2-2128
2.57.2 User Type .........................................................................................2-2129
2.57.3 Service Type .....................................................................................2-2130
2.57.4 Schedule Priority ...............................................................................2-2131
2.57.5 Downlink delay time...........................................................................2-2132
2.57.6 TBF occupancy .................................................................................2-2133
2.57.7 Max PDTCH num .............................................................................2-2134
2.57.8 Preempt priority.................................................................................2-2135
2.58 Cell Reserved Configuration(GCellRsv) ........................................................2-2136
2.58.1 Cell Reserved Configuration ID ..........................................................2-2136
2.58.2 Cell Reserved Parameter 1 ................................................................2-2136
2.58.3 Cell Reserved Parameter 2 ................................................................2-2137
2.58.4 Cell Reserved Parameter 3 ................................................................2-2138
2.58.5 Cell Reserved Parameter 4 ................................................................2-2139
2.58.6 Cell Reserved Parameter 5 ................................................................2-2140
2.58.7 Cell Reserved Parameter 6 ................................................................2-2141
2.58.8 Cell Reserved Parameter 7 ................................................................2-2142
2.58.9 Cell Reserved Parameter 8 ................................................................2-2143
2.58.10 Cell Reserved Parameter 9 ..............................................................2-2144
2.58.11 Cell Reserved Parameter 10.............................................................2-2144
2.58.12 Cell Reserved Parameter 11.............................................................2-2145
2.58.13 Cell Reserved Parameter 12 ............................................................2-2146
2.58.14 Cell Reserved Parameter 13 ............................................................2-2147
2.58.15 Cell Reserved Parameter 14 ............................................................2-2148
2.58.16 Cell Reserved Parameter 15 ............................................................2-2149
2.58.17 Cell Reserved Parameter 16 ............................................................2-2150
2.58.18 Cell Reserved Parameter 17 ............................................................2-2151
2.58.19 Cell Reserved Parameter 18 ............................................................2-2152
2.58.20 Cell Reserved Parameter 19 ............................................................2-2152
2.58.21 Cell Reserved Parameter 20 ............................................................2-2153
2.59 Priority-based Resel Configuration(GPriorityResel)........................................2-2154
2.59.1 Priority-based Resel Configuration ID .................................................2-2154
2.59.2 Cell re-selection Switch Based on priority............................................2-2155

LIX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.59.3 Priority of GSM cells ..........................................................................2-2156
2.59.4 threshold of serving cell that used by priority Cell re-selection
algorithm ...........................................................................................2-2157
2.59.5 threshold that Allow MS re-select to lower priority Cell .........................2-2159
2.59.6 Hysteresis of priority reselection algorithm ..........................................2-2160
2.59.7 Time hysteresis of priority reselection algorithm...................................2-2161
2.59.8 the default priority of Utran Cells.........................................................2-2162
2.59.9 the maximum thresholds of Utran reselection ......................................2-2163
2.59.10 the minimum thresholds of Utran reselection .....................................2-2164
2.59.11 Minimum RX level for Utran cells ......................................................2-2164
2.59.12 the default priority of EUtran Cells.....................................................2-2165
2.59.13 the maximum thresholds of EUtran reselection ..................................2-2166
2.59.14 the minimum thresholds of EUtran reselection ...................................2-2167
2.59.15 Minimum RX level for EUtran cells ....................................................2-2168
2.59.16 High RSRQ thresholds for EUtran reselection....................................2-2169
2.59.17 Low RSRQ thresholds for EUtran reselection ....................................2-2170
2.59.18 Minimum RSRQ for EUtran cells.......................................................2-2171
2.59.19 Minimum RSRQ for EUtran cells based on RSRP..............................2-2172
2.59.20 Minimum RSRP RX level for EUtran cells..........................................2-2174
2.59.21 Enhanced Cell Reselection Parameters Indication .............................2-2175
2.60 BSC Um Soft Synchronous Configuration(GUmsyn) ......................................2-2176
2.60.1 BSC Um Soft Synchronous Configuration ID .......................................2-2176
2.60.2 Um soft Synchronous Support............................................................2-2177
2.60.3 Soft Synchronous Measure Base AB ..................................................2-2178
2.60.4 Soft Synchronous Measure Base MTD ...............................................2-2179
2.60.5 Soft Synchronous Measure Base AB Start Time(hour) .........................2-2180
2.60.6 Soft Synchronous Measure Base AB Start Time(minute)......................2-2181
2.60.7 Soft Synchronous Measure Base AB Duration.....................................2-2182
2.60.8 Soft Synchronous Clock Adjust Start Time(hour) .................................2-2183
2.60.9 Soft Synchronous Clock Adjust Start Time(minute) ..............................2-2184
2.60.10 Soft Synchronous Clock Adjust Duration ...........................................2-2185
2.60.11 Soft Synchronous Measure Base MTD Start Time(hour).....................2-2186
2.60.12 Soft Synchronous Measure Base MTD Start Time(minute) .................2-2187
2.60.13 Soft Synchronous Measure Base MTD Duration ................................2-2188
2.60.14 Allow Detriment Adjust .....................................................................2-2189
2.60.15 Soft Synchronous Measure Base AB(Sunday)...................................2-2190
2.60.16 Soft Synchronous Measure Base AB(Monday) ..................................2-2191
2.60.17 Soft Synchronous Measure Base AB(Tuesday) .................................2-2192

LX

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.60.18 Soft Synchronous Measure Base AB(Wednesday).............................2-2193
2.60.19 Soft Synchronous Measure Base AB(Thursday) ................................2-2194
2.60.20 Soft Synchronous Measure Base AB(Friday).....................................2-2195
2.60.21 Soft Synchronous Measure Base AB(Saturday).................................2-2196
2.60.22 Soft Synchronous Measure Base MTD(Sunday) ................................2-2197
2.60.23 Soft Synchronous Measure Base MTD(Monday) ...............................2-2198
2.60.24 Soft Synchronous Measure Base MTD(Tuesday)...............................2-2199
2.60.25 Soft Synchronous Measure Base MTD(Wednesday)..........................2-2200
2.60.26 Soft Synchronous Measure Base MTD(Thursday) .............................2-2201
2.60.27 Soft Synchronous Measure Base MTD(Friday) ..................................2-2202
2.60.28 Soft Synchronous Measure Base MTD(Saturday) ..............................2-2203
2.60.29 Soft Synchronous Clock Adjust(Sunday) ...........................................2-2204
2.60.30 Soft Synchronous Clock Adjust(Monday)...........................................2-2205
2.60.31 Soft Synchronous Clock Adjust(Tuesday)..........................................2-2206
2.60.32 Soft Synchronous Clock Adjust(Wednesday) .....................................2-2207
2.60.33 Soft Synchronous Clock Adjust(Thursday).........................................2-2208
2.60.34 Soft Synchronous Clock Adjust(Friday) .............................................2-2209
2.60.35 Soft Synchronous Clock Adjust(Saturday) .........................................2-2210
2.60.36 Level Difference Threshold of Ncell and Serving Cell ......................... 2-2211
2.60.37 Synchronous Measure handover Start Threshold...............................2-2212
2.60.38 Max Number Synchronous Measure TRX Per Site.............................2-2213
2.60.39 InterBSC Soft Synchronous Measure Support ...................................2-2213
2.60.40 Whether to adjust frame number.......................................................2-2214
2.60.41 Cycle adjustment .............................................................................2-2215
2.61 AMR Handover Control(GAmrHandoverControl)............................................2-2216
2.61.1 Amr Handover Control ID ...................................................................2-2216
2.61.2 Uplink receive quality for AMR-FR Threshold ......................................2-2217
2.61.3 Uplink receive quality for AMR-FR Value N..........................................2-2218
2.61.4 Uplink receive quality for AMR-FR Value P..........................................2-2219
2.61.5 Uplink receive quality for AMR-HR Threshold ......................................2-2220
2.61.6 Uplink receive quality for AMR-HR Value N .........................................2-2221
2.61.7 Uplink receive quality for AMR-HR Value P .........................................2-2222
2.61.8 Downlink receive quality for AMR-FR Threshold ..................................2-2223
2.61.9 Downlink receive quality for AMR-FR Value N .....................................2-2224
2.61.10 Downlink receive quality for AMR-FR Value P....................................2-2225
2.61.11 Downlink receive quality for AMR-HR Threshold ................................2-2226
2.61.12 Downlink receive quality for AMR-HR Value N ...................................2-2227

LXI

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.61.13 Downlink receive quality for AMR-HR Value P ...................................2-2228
2.61.14 Uplink receive level for AMR-FR Threshold .......................................2-2229
2.61.15 Uplink receive level for AMR-FR Value N ..........................................2-2230
2.61.16 Uplink receive level for AMR-FR Value P...........................................2-2231
2.61.17 Uplink receive level for AMR-HR Threshold .......................................2-2232
2.61.18 Uplink receive level for AMR-HR Value N ..........................................2-2233
2.61.19 Uplink receive level for AMR-HR Value P ..........................................2-2234
2.61.20 Downlink receive level for AMR-FR Threshold ...................................2-2235
2.61.21 Downlink receive level for AMR-FR Value N ......................................2-2236
2.61.22 Downlink receive level for AMR-FR Value P ......................................2-2237
2.61.23 Downlink receive level for AMR-HR Threshold...................................2-2238
2.61.24 Downlink receive level for AMR-HR Value N......................................2-2239
2.61.25 Downlink receive level for AMR-HR Value P ......................................2-2240
2.62 Power Optimize...........................................................................................2-2241
2.62.1 Quality threshold of Assignment DownLink Power Optimize .................2-2241
2.62.2 Assignment UpLink Power Optimize with Quality .................................2-2242
2.62.3 Assignment DownLink Power Optimize with Quality.............................2-2243
2.62.4 Quality threshold of Assignment UpLink Power Optimize .....................2-2244
2.63 FH Handover Control...................................................................................2-2245
2.63.1 The downlink quality of HR to FR load HO ..........................................2-2245
2.63.2 The downlink quality of FR to HR load HO ..........................................2-2246
2.63.3 The downlink quality low threshold of HR(V1) to FR quality HO ............2-2247
2.63.4 The downlink quality high threshold of HR(V1) to FR quality HO ...........2-2248
2.63.5 The downlink level of HR to FR quality HO ..........................................2-2249
2.63.6 The downlink level of HR to FR load HO .............................................2-2250
2.63.7 The downlink level of FR to HR load HO .............................................2-2251
2.63.8 The uplink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2252
2.63.9 The uplink quality of HR to FR load HO...............................................2-2253
2.63.10 The uplink quality High threshold of HR(V1) to FR quality HO.............2-2254
2.63.11 The uplink level of HR to FR quality HO ............................................2-2255
2.63.12 The uplink level of HR to FR load HO................................................2-2256
2.63.13 The uplink level of FR to HR load HO................................................2-2257
2.63.14 The downlink receive quality low threshold of HR(V3) to FR quality
HO....................................................................................................2-2258
2.63.15 The downlink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2259
2.64 Cell Option Configuration .............................................................................2-2260

LXII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


2.64.1 Optimize pending block in downlink transfer state................................2-2260
2.64.2 Optimize dummy block in downlink delay state ....................................2-2261
2.64.3 Times of interval that send downlink dummy block ...............................2-2262

LXIII

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


LXIV

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


About This Manual
About this Manual
This manual introduces the ZXUR 9000 GSM radio parameters for radio configuration and
commissioning.

Audience
l System Engineer
l Commissioning Engineer
l Maintenance Engineer

What Is in This Manual


This manual has the following chapters.

Chapter Name Summary

Chapter 1 Overview Introduces the scope, description methods, and adjustment cautions
for radio parameters.

Chapter 2 GSM Radio Introduces the BSC radio parameters.


Parameters

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


II

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 1
Overview
This chapter explains the definition and classification of radio parameters in GSM network,
modification methods of radio parameters, explanation format of radio parameters, and
precautions in radio parameters adjustment.
Table of Contents
Introduction to BSS Radio Parameters .......................................................................1-1
The Format to Explain Parameters .............................................................................1-2
Precautions on Parameter Adjustment .......................................................................1-4

1.1 Introduction to BSS Radio Parameters


Radio parameters in GSM network refer to parameters related to radio devices and radio
resources. These parameters have an important impact on coverage of cells, distribution of
signaling flow and service property of network, etc. Therefore, adjusting radio parameters
reasonably plays a very important part in GSM network optimization.
GSM radio parameters are classified into project parameters and resource (cell)
parameters.
1. Project parameters
Project parameters refer to parameters related to design, installation, and
commissioning of the project, like antenna height, antenna direction, antenna
gain, antenna download obliquity and cable loss, etc. These parameters must be
determined during network design and are seldom changed during the operation of
the network.
2. Resource (cell) parameters
Resource (cell) parameters refer to parameters related to configuration and utilization
of radio resources, which usually transmit on radio interface (Um) to keep the base
station and mobile station consistent. Radio parameters covered in this manual are
mainly resource parameters. Radio resource parameters in BSS contain:

l GERAN subnetwork parameters, BSC management NE parameters,


configuration set parameters;
l Global resource parameters for BSC, site parameters, GERAN external cell
parameters, UTRAN external cell parameters
l Cell Parameters
l TRX parameters, power control parameters, handover control parameters,
UTRAN handover control parameters, adjacent interference cell parameters,
adjacent handover cell parameters, adjacent reselection cell parameters,

1-1

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

adjacent handover and reselection cell parameters, UTRAN adjacent cell


handover and reselection parameters, UTRAN adjacent handover cell
parameters, UTRAN adjacent reselection cell parameters, frequency hopping
system parameters.

1.2 The Format to Explain Parameters


Each radio parameter in this manual is individually clarified in a table. For details, refer to
Table 1-1.

Note:
1. Radio parameters in this system is modified through offline modification mode, that is,
the modification on interface only can be effective after the synchronization action to
NE is conducted.
2. Some parameter values in the interface are not fully the same as those in database,
with certain corresponding relationship between them. For specific corresponding
relationship, refer to appendixes.

Table 1-1 Format to Explain Radio Parameters

Full Name English Parameter Name on the Interface

Abbreviation Abbreviation for English parameters

Managed Object The managed object which the parameter belongs to

3GPP Name Parameter name in 3GPP protocol

3GPP Reference 3GPP protocol version number for parameter reference

Description Descriptive text for this parameter

Instance Involved object by the parameter

Value Range and Value range and step of this parameter. If the parameter is in mapping form,
Step actual parameter value that corresponds to all indices will be enumerated

Unit Parameter unit

Default Value English Parameter Name on the Interface

Default Value
Configuration Reason The reason for setting the default value of this parameter

The factors that are taken into consideration during this parameter
configuration.
Configuration Rule The impact on the network performance and users feeling after this
and Adjustment parameter is adjusted to a larger or smaller value.
Suggestion The parameter related to scenarios specifies the adjustment suggestion.

1-2

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 1 Overview

Online = After a parameters value is modified, it is immediately synchronized


and takes effect.
Offline = After one or several parameters' values are modified, the
Change Mode modification takes effect after data synchronization.

Relevant functions and features of the network that correspond to this


Related Features parameter

Parameters which have data restriction relationship with the parameter.


For example, this parameter takes effect only after one or multiple relevant
parameters are enabled; this parameter's value has a restriction relationship
with one or multiple relevant parameters, such as larger than or smaller than
Related Parameters the relevant parameter.

Relationship Dependency among relevant parameters

Related Interfaces Interfaces related to this parameter

The impact on the equipment. after the modification of this parameter is


valid. The impact levels are described as follows:
Level 0: Modifying this parameter will bring an impact on the running of this
equipment. That is, during this parameter setting, the equipment is not
influenced.
Level 1: Modifying this parameter will cause the carrier deleted and
established, and the cell out of service.
Level 2: Modifying this parameter will cause the base station out of service.
Impact on Equipment Level 3 : Modifying this parameter will cause BSC out of service.

The impact on the services ( such as, services are interrupted) after the
modification of this parameter is valid. The impact levels are described as
follows:
Level 0: Modifying this parameter will not bring an impact on the idle state
and connection state of the services, but not on the usage and status of all
users. That is, the users cannot detect the change of network service.
Level 1: Modifying this parameter will bring an impact on the users in idle
state, but not on the users during communication or network connection.
Level 2: Modifying this parameter will cause the communication and service
interrupted, but restored in a short while. For example, you can initiate a
service immediately.
Level 3: Modifying this parameter will bring an impact on all users in idle
and connection modes, and will cause the network service interrupted, and
Impact on service restored for a period of time.

Negotiation With CN Whether this parameter should be negotiated with CN

OMC Access Path This parameters location on the network management interface

Parameter Modifying
Version Whether this parameter is modified in this version

1-3

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail Modification details of this parameter in this version

1.3 Precautions on Parameter Adjustment


Radio parameters adjustment, according to the type of the problem to be solved, falls into
two kinds.
l First is to solve static problem, that is, to correct traffic model in system design by
measuring actual average traffic and signaling flow in every district and to solve
common problems existing for long.
l Second is to solve problems at a particular time like traffic overload in some district,
channel congestion due to sudden events or random events.
For the first type, service providers must perform measurement and summarization on
actual operation regularly, and then perform appropriate adjustment on global or partial
parameters and configurations. For the second type, network operators adjust some radio
parameters at real time according to instant data from measurement results.
Most radio parameters in GSM system are based on one cell or one location area. It is
necessary to consider whether parameter adjustment in this cell will influence other cells,
especially the adjacent one, for parameters between cells are related to each other greatly.
Otherwise, it may cause negative influence.
Determine whether the problem results from equipment fault (including connections) first
when it occurs in some part of the network. Adjust radio parameters only when determined
that the problem does result from service.

1-4

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2
GSM Radio Parameters
Table of Contents
GSM Logical Configuration(GBssFunction) ................................................................2-2
BSS Function Timer(GBssFunctionTimer) ..............................................................2-167
BSS Function Handover Control(GBssHandoverControl) .......................................2-240
eMLPP Configuration(GBssEmlpp) ........................................................................2-265
eMLPP User Priority Configuration(GEmlppUserPriority)........................................2-283
BSS Function PS(GBssFunctionPS) ......................................................................2-303
Common Measure and Information Exchange(GCommMeas) ................................2-402
BSC Precise Paging Configuration(GBssPrecisePaging)........................................2-421
BSC Reserved Configuration(GBssFunctionRsv) ...................................................2-430
External GSM Cell Configuration(GExternalGsmCell).............................................2-449
External UTRAN FDD Cell Configuration(GExternalUtranCellFDD) ........................2-487
External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr) ...................2-498
External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD)................... 2-511
External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)....................2-520
External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr) ...............2-543
External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)...................2-566
GSM Cell Configuration(GGsmCell) .......................................................................2-576
Cell Precise Paging Configuration(GCellPrecisePaging).........................................2-775
Location Area(GLocationArea) ...............................................................................2-780
Routing Area(GRoutingArea)..................................................................................2-785
AMR Configuration(GCellAmr) ...............................................................................2-787
Frequency Hopping System(GHoppingFrequency).................................................2-876
Baseband Hopping System(GHoppingBaseband) ..................................................2-880
Handover Control(GHandoverControl)....................................................................2-884
SDCCH Handover Control(GSdHandoverControl) ................................................ 2-1100
VAMOS Configuration(GVamos)........................................................................... 2-1189
UTRAN Measurement(GUtranMeasure) ...............................................................2-1214
E-UTRAN Measurement(GEutranMeasure)..........................................................2-1290
UTRAN Handover Control(GUtranHandoverControl) ............................................2-1318
Site(GBtsSiteManager).........................................................................................2-1364
Site baseband share Configuration(GSiteBaseBandShare) ..................................2-1379
Bvc (GBvc)...........................................................................................................2-1385
GPRS Configuration(GCellPs)..............................................................................2-1388
PS Channel Schedule Configuration(GPsChannelSchedule)................................2-1461
GPRS-EDGE Schedule Configuration(GGprsEdgeSchedule)...............................2-1477
NACC Configuration(GNACC)..............................................................................2-1486
NC2 Configuration(GCellPsNc2) ..........................................................................2-1491

2-1

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

DTM Configuration(GDTM) ..................................................................................2-1592


PS Power Control(GPsPowerControl) ..................................................................2-1597
EDGE Configuration(GCellEdge)..........................................................................2-1683
Enhanced EDGE Configuration(GEhancedEdge) .................................................2-1702
Serving Cell CRRM Configuration(GCrrmCellLd)..................................................2-1714
SubCell(GSubCell) ...............................................................................................2-1732
Subcell Handover Control(GScHandoverControl) .................................................2-1735
SubCell PS Channel Allocation Configuration(GSubCellPsAlloc)..........................2-1765
Power Control(GPowerControl) ............................................................................2-1778
Power Share(GPwShare) .....................................................................................2-1890
PS Handover Control(GPsHandoverControl)........................................................2-1900
Trx(GTrx)..............................................................................................................2-1981
Ts(GTs) ................................................................................................................2-2000
Adjacent GSM Cell Configuration(GGsmRelation) ................................................2-2012
Interfere Gsm Cell Configuration(GGsmIntfRelation) ............................................2-2092
Visit Paging Cell(GGsmVpcRelation)....................................................................2-2095
Adjacent UTRAN Cell Configuration(GUtranRelation)...........................................2-2098
Adjacent E-UTRAN Cell Configuration(GEutranRelation) ..................................... 2-2116
User and Service Resource Schedule(GUserAndSrvBasedSche) ........................2-2123
User Priority and Service Type Configuration(GPsUserAndSrvType) ....................2-2128
Cell Reserved Configuration(GCellRsv)................................................................2-2136
Priority-based Resel Configuration(GPriorityResel) ..............................................2-2154
BSC Um Soft Synchronous Configuration(GUmsyn).............................................2-2176
AMR Handover Control(GAmrHandoverControl) ..................................................2-2216
Power Optimize....................................................................................................2-2241
FH Handover Control ...........................................................................................2-2245
Cell Option Configuration .....................................................................................2-2260

2.1 GSM Logical Configuration(GBssFunction)


2.1.1 User Label
Full Name User Label

Abbreviation userLabel

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description User Label

Instance None

Value Range and Step 80 char

Unit N/A

2-2

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.2 BSS ID
Full Name BSS ID

Abbreviation GBssFunction

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description BSS ID

Instance None

Value Range and Step 1..4095

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-3

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.3 Managed Object Description


Full Name Managed Object Description

Abbreviation description

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Managed Object Description

Instance None

Value Range and Step None

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-4

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.4 BSC Sequence


Full Name BSC Sequence

Abbreviation GBssFunctionSeq

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description BSC Sequence

Instance None

Value Range and Step 1..4095

Unit N/A

Default Value N/A

Default Value
Configuration Reason Set this parameter based on the on-site planning.

Configuration Rule and


Adjustment Suggestion This parameter is configured on the basis of on-site planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-5

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.5 Load indication allowed


Full Name Load indication allowed

Abbreviation LoadInd

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

The load indication process informs the adjacent BSCs about the load at
the cell border, thus providing more information as references in both
normal handover and the intra-BSC traffic handover.
This parameter determines whether load indication is allowed, and the
validity of parameter Load indication valid time and Load indication
period.
If this parameter is set to 0 (Not send load indication), the latter two
Description parameters are invalid.

Instance BSC

0: Not Send Load Indication


1: Send Load Indication Periodically
Value Range and Step 2: Send Load Indication When Congestion

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This switch can be enabled upon request. Otherwise,
Adjustment Suggestion it should be disabled.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

2-6

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.6 Load indication Valid Time


Full Name Load indication Valid Time

Abbreviation LoadValidTime

Managed Object GSM Logical Configuration

3GPP Name Time indication IE

3GPP Reference 3GPP TS 48.008

During load indication, the BSC sends the BSSAP LOAD INDICATION
message to MSC periodically to inform the MSC about the load status.
The message includes the time indication information, which indicates
the valid time period of the service load information.
MSC relays the information in the BSSAP LOAD INDICATION message
to neighboring BSCs.
This parameter represents the valid time length of the load message.
Description The value 255 indicates permanent validity.

Instance BSC

Value Range and Step 1..255

Unit 10s

Default Value 18

Default Value
Configuration Reason Due to the practical application of the net

Generally, you do not have to modify this parameter


and the default value is recommended. If the parameter value is too
Configuration Rule and large, the MSC regards that the current load has a long valid period,
Adjustment Suggestion which cannot reflect the actual load variation of the BSC. If the
parameter value is too small, the reported load information becomes
invalid in a short time.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

2-7

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.7 Load Indication Period


Full Name Load Indication Period

Abbreviation LoadIndPrd

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

During load indication, the BSC sends the BSSAP LOAD INDICATION
message to MSC periodically to inform the MSC about the load status.
The message includes the time indication information, which indicates
the valid time period of the service load information.
The MSC then sends the BSSAP LOAD INDICATION message to
neighboring BSCs.
When the load indication message is sent periodically, this parameter
Description decides the period for the BSC to send the load indication message.

Instance BSC

Value Range and Step 10..65530

Unit 100ms

Default Value 1500

Default Value
Configuration Reason Due to the practical application of the net

2-8

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Generally, you do not have to modify this parameter


and the default value is recommended. If the parameter value is too
Configuration Rule and large, the load indication message cannot accurately reflect the load
Adjustment Suggestion variation of the BSC. If the parameter value is too small, the frequent
reporting of the load indication message will cause the waste of signalling
link resources.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.8 Send assignment failure allowed in outer direct retry


procedure
Full Name Send assignment failure allowed in outer direct retry procedure

Abbreviation ExDRSendAssFail

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the Assignment Failure message is


allowed to be sent to the MSC if the external directed retry procedure
fails.
0: the Assignment Failure message is NOT allowed to be sent
Description 1: the Assignment Failure message is allowed to be sent

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

2-9

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Enabling this switch will increase the count of assignment failures


because the MS will still attempt directed retries after the assignment
Default Value
failure message is sent. Besides, some MSCs do not support the
Configuration Reason
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.

Enabling this switch will increase the count of assignment failures


because the MS will still attempt directed retries after the assignment
Configuration Rule and
failure message is sent. Besides, some MSCs do not support the
Adjustment Suggestion
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.

Change Mode Offline

Related features ZGB-03-01-002 Directed Retry

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.9 TFO Enable


Full Name TFO Enable

Abbreviation TFOControl

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-10

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is one of TFO control parameters. It decides whether


TFO is enabled.
0: disable
1: enable
When TFO is disabled, i.e., TFOControl_0 is set to 0, other related
functions are also disabled, i.e. the values of TFOControl_1,
TFOControl_2 and TFOControl_3 are 0.
TFO is an inband protocol. The TC on both sides uses this protocol to
negotiate the coding and decoding after a call is set up. The sender
decoder and receiver coder are bypassed.
The voice frame used over the air interface is directly sent to the receiver
to improve voice quality.
If the speech version supported by the cell is not AMR, you can set up
TF0 if the speech versions
supported by two cells are same. If speech version is AMR, TFO can
be set up only if the supported speech coding and decoding types are
the same. Otherwise, TFO cannot be set up.
If IPA is configured, the speech coding negotiation is performed on the
Description CN side.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enable this switch when TFO support is required.


Configuration Rule and
It is recommended to enable TFO in scenarios requiring high voice
Adjustment Suggestion
quality because TFO can improve the voice MOS.

Change Mode Offline

Related features ZGO-04-02-006 TFO

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-11

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.10 Report voice quality


Full Name Report voice quality

Abbreviation VoiceQualityReport

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether the BTS adds the speech quality related
parameters in the measurement report, preprocessing of measurement
Description report, and preprocessing of enhanced measurement report.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason It is not a basic function and disabled by default.

Configuration Rule and


Adjustment Suggestion This parameter is enabled as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-12

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.1.11 R99 Ind


Full Name R99 Ind

Abbreviation R99Ind

Managed Object GSM Logical Configuration

3GPP Name None

3GPP Reference 3GPP TS23.060

It indicates R99 protocol version ID. BSS determines whether to en-


code/decode message fields added in the R99 version for the protocol
Description according to this parameter.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason Consider CN's implemtation and MS's capability

Configuration Rule and The CN and the MS are required to be of releases


Adjustment Suggestion later than R99.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-13

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.12 DCS1800/PCS1900 support


Full Name DCS1800/PCS1900 support

Abbreviation FuncExt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the supported frequency band. If you select


DCS1800, the DCS1800 frequency band will be supported. If you select
PCS1900, the PCS1900 frequency band will be supported. This param-
Description eter cannot be modified after you select a frequency band.

Instance BSC

0: DCS1800
Value Range and Step 1: PCS1900

Unit N/A

Default Value 0

Default Value
Configuration Reason DCS1800 is a commonly-used frequency band.

Configuration Rule and You can set this parameter according to the
Adjustment Suggestion actual frequency band planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-14

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.13 External cell load notify


Full Name External cell load notify

Abbreviation NotifyOutCellLoad

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to include the load information of the


local cell into the information element "Old BSS to New BSS Information"
when the traffic of the cell under the current BSC is handed over to a cell
Description under another BSC.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Generally, the default value is recommended.


Adjustment Suggestion However, you can enable this function if necessary.

Change Mode Offline

Related features ZGB-03-03-003 LAPD Cluster

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-15

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.14 Neighbor cell load valid duration


Full Name Neighbor cell load valid duration

Abbreviation AdjCellLoadLife

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the validity period of a neighbor cell's load infor-
Description mation.

Instance BSC

Value Range and Step 1..255

Unit 10s

Default Value 6

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


If the parameter value is too large, the neighbor cell deems that
Configuration Rule and
the load information has a long validity period, which cannot reflect
Adjustment Suggestion
the actual load information in time. If the parameter value is too
small, the load information will be reported frequently.

Change Mode Offline

Related features ZGB-03-03-003 LAPD Cluster

Related Parameters NotifyOutCellLoad

This parameter is valid only when the switch NotifyOutCellLoad is


Relationship
enabled.

Related Interfaces A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-16

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.15 Pre-Access Control for IP Transmission


Full Name Pre-Access Control for IP Transmission

Abbreviation IPAbisFilter

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Pre-access control switch for IP Transmission at the Abis interface.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value The newly added limitations of the adjacent cell is selected for handover,
Configuration Reason to avoid improper handover.

Configuration Rule and


Adjustment Suggestion This parameter is disabled by default and adjusted in actual use.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.16 Using load information provided by CRRM


Full Name Using load information provided by CRRM

Abbreviation LoadClassScrPath

Managed Object GSM Logical Configuration

2-17

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to use the Load information provided


Description by CRRM for handover decision.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The load is obtained more accurately during low traffic.

Configuration Rule and Loads are obtained through CRRM mode, so it is not recommended
Adjustment Suggestion to modify the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.17 Automatic Resource Indication Threshold


Full Name Automatic Resource Indication Threshold

Abbreviation ResourceIndThs

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-18

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the threshold for the BSC to send a resource
indication to the MSC. The value indicates the ratio of the count of
current available channels to the count of total channels. If the current
available resources are fewer than the specified threshold, the BSC
sends a resource indication to the MSC, indicating the resource situation.
The resource indication procedure has four modes:
1. Automatic sending mode: Upon receiving the BSSAP RESOURCE
REQUEST message, the BSC returns a BSSAP RESOURCE
INDICATION message containing no resource information as response.
Afterwards, when the condition is met for automatic sending of resource
information, the BSC sends a BSSAP RESUORCE INDICATION
message to the MSC. The parameter Periodicity IE in the BSSAP
RESOURCE REQUEST message specifies the message sending
interval. If Periodicity IE is 0, the BSC neglects this value.
The condition for automatically sending resource information can be a
traffic threshold or the interval between two messages.
2. One-time mode: Upon receiving the BSSAP RESOURCE REQUEST
message, the BSC returns a BSSAP RESOURCE INDICATION
message containing the resource information. If the BSSAP RESOURCE
REQUEST message does not contain Extended Resource Indication
IE, the BSC stops sending return messages, and waits for the next
BSSAP RESOURCE REQUEST message. If the BSSAP RESOURCE
REQUEST message contains Extended Resource Indication IE, the
BSC follows the rule set by Subsequent Mode in the message, as in
mode 4. If the previous mode is 1 or 3, the BSC uses the previous
mode. Otherwise, mode 4 is used.
3. Periodicity mode: Upon receiving the BSSAP RESOURCE REQUEST
message, the BSC returns a BSSAP RESOURCE INDICATION
message containing the resource information, and then sends the
message periodically.
If Periodicity IE in the BSSAP RESOURCE REQUEST message is not
0, the sending period is the multiplication of Periodicity IE and 100 ms. If
the Periodicity IE is 0, the BSSAP RESOURCE REQUEST message is
considered incorrect.
4. Stop mode: Upon receiving the BSSAP RESOURCE REQUEST
message, the BSC returns a BSSAP RESOURCE INDICATION
message containing no resource information as response. Afterwards,
the BSC does not send any information about the cell resources to the
Description MSC.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 30

2-19

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


Configuration Rule and The larger the parameter value is, the more easily the automatic resource
Adjustment Suggestion indication is triggered. The smaller the parameter value is, the more
difficultly the automatic resource indication is triggered.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.18 Access class parameter config select


Full Name Access class parameter config select

Abbreviation accconfigselect

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether to enable the user access control


based on the SIM card level and, if enabled, which set of access
control parameters is used. Four sets of access control parameters
are available.
0Disable the user access control function
1Enable the first set of ACC data as the user access control
parameters.
2Enable the second set of ACC data as the user access control
parameters.
3Enable the third set of ACC data as the user access control
Description parameters.

2-20

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

4Enable the fourth set of ACC data as the user access control
parameters.

Instance BSC

0:Disable the user access control function


1:Enable the first ACC configuration data as user access control
parameters
2:Enable the second ACC configuration data as user access control
parameters
3:Enable the third ACC configuration data as user access control
parameters
4:Enable the fourth ACC configuration data as user access control
Value Range and Step parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason This is a special functional switch, which is disabled by default.

Configuration Rule and


Adjustment Suggestion This parameter can be enabled upon request.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.19 First barred class


Full Name First barred class

Abbreviation firstbarredclass

Managed Object GSM Logical Configuration

2-21

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the first SIM card level which is forbidden for
access. This parameter uses ACC data for the user access control based
Description on the SIM card level.

Instance BSC

Value Range and Step 0..9

Unit N/A

Default Value [0,0,0,0]

Default Value It is a manual flow-control parameter and is often modified manually.


Configuration Reason The default value is set as starting from 0.

The value can be set in accordance with on-site conditions. Each SIM
Configuration Rule and
card periodically performs barring on access , so the default value is
Adjustment Suggestion
taken.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.20 Barred class windows


Full Name Barred class windows

Abbreviation barredclasswindows

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-22

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the number of SIM card levels which are for-
bidden for access. This parameter uses ACC data for the user access
Description control based on the SIM card level.

Instance BSC

Value Range and Step 1..10

Unit N/A

Default Value [1,1,1,1]

It is a manual flow-control parameter and is often modified manually.


Default Value
The default value is set to only control level 1, to prevent too many users
Configuration Reason
from being influenced prior to manual modification.

The value can be set in accordance with on-site conditions. If it is


Configuration Rule and
necessary to reinforce the control, uers can adjust the window size to a
Adjustment Suggestion
larger size.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.21 Barred time step


Full Name Barred time step

Abbreviation barredtimestep

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-23

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies the period of time for forbidding the access of
subscribers of a certain SIM card level to avoid the occurrence that the
access of the same SIM card level is always forbidden when ACC param-
eters are valid. This parameter ensures that subscribers of different SIM
Description card levels are forbidden in turn.

Instance BSC

Value Range and Step 1..3600

Unit N/A

Default Value [30,30,30,30]

It is a manual flow-control parameter and is often modified manually.


Default Value
The default value is set to 30 s, because this barred time has a little
Configuration Reason
impact on users, which is unlikely to bring about user complaints.

The value can be set in accordance with on-site conditions. It is


Configuration Rule and recommended not to adjust the sliding rate as too high, to prevent the
Adjustment Suggestion MS from being barred continuously for a long time, which influences
users on implementing services.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.22 Access Control


Full Name Access Control

Abbreviation accesscontrol

Managed Object GSM Logical Configuration

3GPP Name Access Control Class

2-24

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 44.018

This parameter specifies the access priority classes which are forbidden
for access.
Each MS in GSM system has an access priority class (15 classes in all).
Class 10 is not used for access control as specified in the protocol.
Cn indicates users with class n (n= 0, 1, , 9, 11, , 15)
If Cn = 0, the MSs with class n are allowed to access the cell.
If Cn = 1, the MSs with class n are forbidden to access the cell.
This parameter is valid when UseCellAcc is set to 0. Otherwise, the
Description AccessControl parameter at the cell level is used for access control.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

Default Value
Configuration Reason Generally, all MSs are allowed to access the cell.

Configuration Rule and If you want the MSs of a priority to access


Adjustment Suggestion the cell, you should set Cn to 0. If not, you should set Cn to 1.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.23 Paging repeat number


Full Name Paging repeat number

Abbreviation PagRep

Managed Object GSM Logical Configuration

2-25

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter specifies how many times a paging message will be


re-sent.
0: Not re-send
Description 1-4: The times of re-sending

Instance BSC

Value Range and Step 0..4

Unit N/A

Default Value 1

Default Value
Configuration Reason The message is re-sent once.

The higher the value is, the more likely the


Configuration Rule and MS is to be paged. In this case, however, the load of the paging channel
Adjustment Suggestion will increase, so you should consider both the load of the paging
channel and the success rate of the paging when setting this parameter.

Change Mode Offline

Related features ZGB-02-01-001 Paging

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.24 Congestion Threshold for Send Load Indication


Full Name Congestion Threshold for Send Load Indication

Abbreviation LoadIndThs

Managed Object GSM Logical Configuration

3GPP Name N/A

2-26

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter specifies the threshold for sending the load indication. If
the load of a cell administered by this BSC is higher than the value of this
parameter, the system initiates a load indication process, which informs
adjacent BSCs about the load of the cells at the border so that more ref-
Description erences can be provided in normal handovers and intra-BSC handovers.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 100

Default Value It is a functional parameter and is configured


Configuration Reason to 100 (no load indication is initiated) by default.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.615c

Parameter Modifying
Detail New

2.1.25 Forbid Handover According to Resource Threshold of Load


Indication
Full Name Forbid Handover According to Resource Threshold of Load Indication

Abbreviation LoadForbidHo

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-27

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to prohibit handover to an external


Description adjacent cell with the resource usage higher than that of load indication.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value It is a functional parameter and is configured


Configuration Reason to "No" by default.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.615c

Parameter Modifying
Detail New

2.1.26 Resource Threshold of Load Indication for Forbid Handover


Full Name Resource Threshold of Load Indication for Forbid Handover

Abbreviation LoadThsForbidHo

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

If the resource usage of an external adjacent cell is higher than the value
Description of this parameter, the system does not trigger handover to the cell.

Instance BSC

2-28

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..100

Unit %

Default Value 100

It is a functional parameter and is configured


Default Value
to 100 by default, which indicates that handover to the external adjacent
Configuration Reason
cell initiating the load indication process is not prohibited.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.615c

Parameter Modifying
Detail New

2.1.27 Force FACCH


Full Name Force FACCH

Abbreviation FacchOnly

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether the assignment uses the TCH/F as the
first priority when requesting a channel. If the parameter is set to Yes, the
settings of the cell parameters FacchCallInd_0, FacchCallInd_1, Facch-
CallInd_2, and FacchCallInd_3 will not be used. Instead, the TCH/F will
Description be used first.

Instance BSC

2-29

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

By default, the cell-level switch is used.


Default Value
In system control parameters, this parameter is not used as the first
Configuration Reason
priority.

Configuration Rule and The default value is recommended. If you want


Adjustment Suggestion to control the FACCH, you can use cell parameters.

Change Mode Offline

Related features ZGB-03-01-004 Immediate TCH Assignment

Related Parameters facchCallEmgCall


facchCallPagResp
facchCallMo
facchCallCallReEst

If this parameter is set to Yes, the settings of the cell parameters


FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3
will not be used. Instead, the TCH/F will be used first.
Relationship
If the parameter is set to No, the system will decide whether to
use the TCH/F first according to the settings of the cell parameters
FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.28 Use system message method when MSC over loaded or


link blocked
Full Name Use system message method when MSC over loaded or link blocked

Abbreviation MscSysInfoFlc

Managed Object GSM Logical Configuration

2-30

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to use system messaging to carry out


flow control when all MSCs is overloaded (Flow control must be enabled
by the overload) or signalling points are congested.
Using system messaging refers to rejecting the access of some MSs
according to the parameter ACCN in system messages. Using FUC
refers to rejecting the access of some MSs according to the number of
Description MSs that are randomly accessed to the RACH.

Instance BSC

1: SystemInfo Method
Value Range and Step 0: FUC Method

Unit N/A

Default Value 0

The FUC can initiate flow control according


to the importance of services. When the MSCs are not heavily overload
Default Value
or the signalling points are not heavily congested, the FUC-based
Configuration Reason
flow control has less effect on user satisfaction than the system
messaging-based flow control.

This parameter only affects MSC overloads and


signalling point congestions. As the most effective flow control method,
the system messaging-based flow control rejects the access of some
Configuration Rule and
MSs or disables the access to the cell. The FUC-based flow control
Adjustment Suggestion
rejects the access of MSs by access reason. The FUC-based flow
control
is recommended.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-31

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.1.29 Start system message method for CPU overload


Full Name Start system message method for CPU overload

Abbreviation CpuSysInfoFlc

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to enable system messaging-based flow


control when the CPU usage of the CMP increases to the threshold of the
Description system messaging-based flow control.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value It is recommended to use the FUC-based flow


Configuration Reason control as a priority. This switch is disabled by default.

The parameters CpuSysInfoFlc and CpuFucFlc


only affect the CPU flow control. The CPU flow control can be achieved
Configuration Rule and
by using the system messaging-based flow control along with the
Adjustment Suggestion
FUC-based
flow control.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-32

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.1.30 Start FUC flow control for CPU overload


Full Name Start FUC flow control for CPU overload

Abbreviation CpuFucFlc

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to enable FUC-based flow control when


the CPU usage of the CMP increases to the threshold of the FUC-based
Description flow control.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

The FUC can initiate flow control according


to the importance of services. When the CPU is not overloaded, the
Default Value
FUC-based flow control has less effect on user satisfaction than the
Configuration Reason
system messaging-based flow control. Therefore, this parameter is
enabled by default.

The parameters CpuSysInfoFlc and CpuFucFlc


only affect the CPU flow control. The CPU flow control can be achieved
Configuration Rule and
by using the system messaging-based flow control along with the
Adjustment Suggestion
FUC-based
flow control.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-33

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.31 The maximum control level for MSC overload or link block
Full Name The maximum control level for MSC overload or link block

Abbreviation MscFlcMaxLevel

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the highest flow control level when MSCs are
Description overloaded or signalling points are congested.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 6

According to the default FUC threshold, setting


Default Value the level to 6 can put about half traffic under flow control. If the
Configuration Reason system load cannot be reduced, the problem possibly lies in system
capacity. In this case, non-FUC-based flow control is recommended.

You can set this parameter according to the


setting of the FUC-based flow control bitmap. The higher the value
Configuration Rule and
is, the higher the level will be allowed for the flow control triggered
Adjustment Suggestion
by MSC overloads or signalling point congestions. Similarly, lower
values correspond lower flow control levels.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-34

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.32 Start limit of system message method for CPU overload


Full Name Start limit of system message method for CPU overload

Abbreviation CpuSysInfoCtlCpu

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the CMP's CPU usage threshold that triggers the
system messaging-based flow control when being exceeded. That means
if the CPU usage exceeds the threshold and the parameter CpuSysInfoFlc
Description is set to "Yes", the system messaging-based flow control will be enabled.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 65

For the CMP, CPU usage of 65% or above is generally


Default Value
considered to be high. In this case, you can selectively put some
Configuration Reason
services under flow control to avoid higher CPU usage.

"This parameter is valid when the parameter


CpuSysInfoFlc is enabled. Generally, the default value is recommended.
Configuration Rule and The higher the threshold is, the higher the CPU usage must be before
Adjustment Suggestion flow control is enabled. Setting an overhigh threshold is bad for
congestion relief in busy hours while setting a too low threshold
will result in early flow control and affect normal services.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters CPUSysInfoFlc

This parameter is valid only when the switch


Relationship
CPUSysInfoFlc is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

2-35

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.33 Start limit of FUC flow control for CPU overload


Full Name Start limit of FUC flow control for CPU overload

Abbreviation CpuFucCtlCpu

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the CMP's CPU usage threshold that triggers
the FUC-based flow control when being exceeded. That is to say, if the
CPU usage exceeds the threshold and the parameter CpuFucFlc is set to
Description "Yes", the FUC-based flow control will be enabled.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 75

For the CMP, CPU usage of 75% or above is generally


Default Value
considered to be high. In this case, you should put some services
Configuration Reason
under flow control to avoid higher CPU usage.

This parameter is valid when the parameter


CpuFucFlc is enabled. Generally, the default value is recommended.
Configuration Rule and The higher the threshold is, the higher the CPU usage must be before
Adjustment Suggestion flow control is enabled. Setting an overhigh threshold is bad for
congestion relief in busy hours while setting a too low threshold
will result in early flow control and affect normal services.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters CPUFucFlc

This parameter is valid only when the switch


Relationship
CPUFucFlc is enabled.

Related Interfaces N/A

2-36

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.34 B2 support AMR


Full Name B2 support AMR

Abbreviation V2TruSupportAmr

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Whether the BTS 2.0 carrier on the BTSV2 site supports the AMR voice
algorithm decides whether the services on the carrier can use AMR voice
Description coding.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to the actual carrier.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-37

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.35 Enable power dynamic sharing


Full Name Enable power dynamic sharing

Abbreviation pwrDynShareSupport

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines if dynamic power sharing is enabled.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling this function can increase the usage


of the BTS power resources by sharing the unused power of the carriers
Configuration Rule and
that have small transmit power with the carriers that requires large
Adjustment Suggestion
transmit power. In this way, the maximum transmit power of each carrier
is increased.

Change Mode Offline

Related features ZGO-04-01-007--Dynamic Power Sharing

Related Parameters PwrDynShare

This switch is valid only when the global power sharing switch and the
Relationship
cell-level power sharing switch are both enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-38

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.36 Power congest delay


Full Name Power congest delay

Abbreviation PwrCongDelay

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the delay of power congestion. If the time


since the last congestion exceeds this threshold, the system cancels
Description power freezing.

Instance BSC

Value Range and Step 0..255

Unit s

Default Value 30

Default Value The value 30s can generally avoid frequent


Configuration Reason power freezing and unfreezing.

If this parameter is configured to a small


value, power freezing and unfreezing will frequently occur. If this
Configuration Rule and
parameter is configured to a large value, the system cannot quit the
Adjustment Suggestion
congestion state in time, which has certain impact on the service
performance.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-39

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.37 Time interval of channel power adjustment based on power


dynamic sharing
Time interval of channel power adjustment based on power dynamic shar-
Full Name ing

Abbreviation ChannelPwrAdjItvl

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

It indicates the interval of power adjustment control. It is used to prevent


from degraded performance due to too frequent power adjustment (such
as intra-cell handover and inter-cell handover).
Description This parameter is supported from version 6.20.61.

Instance BSC

Value Range and Step 5..255

Unit s

Default Value 10

Default Value Generally, an interval of 10s can effectively


Configuration Reason prevent too frequent congestion control actions.

The default value is recommended. Reset this


Configuration Rule and
parameter appropriately if intra-cell or inter-cell handover caused
Adjustment Suggestion
by power and congestion control occurs frequently.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-40

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.38 If paging flow control due to high CPU


Full Name If paging flow control due to high CPU

Abbreviation cpupagingflc

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to enable paging flow control when


Description CPU usage is high.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Generally, the default value is recommended.


Configuration Rule and You can decide whether to enable this switch according to paging
Adjustment Suggestion messages
and CPU usage.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-41

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.1.39 CPU threshold of paging flow control


Full Name CPU threshold of paging flow control

Abbreviation CpuPagingCtlCpu

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the CPU usage threshold for initiating the
Description paging flow control when the threshold is exceeded.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 80

Default Value This is a special functional switch, which


Configuration Reason is enabled by default.

Configuration Rule and You can decide whether to enable this switch
Adjustment Suggestion according to paging messages and CPU usage.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

Related Parameters N/A

Relationship N/A

Related Interfaces A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-42

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.40 Radio pre-access procedure switch


Full Name Radio pre-access procedure switch

Abbreviation RadioPreAccsFlag

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Radio pre-access process switch for the CRRM.


0: Not perform radio pre-access determination procedure
1: Perform radio pre-access procedure and determine whether to
Description perform handover with the current transmission resources.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value The synchronization to the platform and 3G loads is inaccurate, which
Configuration Reason affects 2/3G handover.

Configuration Rule and The default value is disabled. If loads are properly synchronized to the
Adjustment Suggestion platform, it is recommened to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-43

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.41 Transport Pre-Access Flag


Full Name Transport Pre-Access Flag

Abbreviation TransPreAccsFlag

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Transport resource pre-access process switch for the CRRM.


0: Not perform transport pre-access determination procedure
1: Perform transport pre-access procedure and determine whether to
Description perform handover with the current transmission resources.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value The synchronization to the platform and 3G loads is inaccurate, which
Configuration Reason affects 2/3G handover.

Configuration Rule and The default value is disabled. If loads are properly synchronized to the
Adjustment Suggestion platform, it is recommened to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-44

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.42 The switch of sending Immediate assign message and radio


channel activating synchronously
The switch of sending Immediate assign message and radio channel ac-
Full Name tivating synchronously

Abbreviation SendImmAss

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a switch to enable the simultaneous sending of the


immediate assignment message and the channel activation message.
According to a general immediate assignment flow, the immediate
assignment message is sent after the channel activation message
and the channel activation acknowledgement message. When this
procedure is followed, the immediate assignment message may fail
after the channel activation message is sent and the channel activation
acknowledgement message is received if MS times out due to a long
transmission delay at Abis interface (for example, when a satellite
medium is used for transmission). Sending the immediate assignment
message and the channel activation message at the same time can
ensure the timely sending of the immediate assignment message,
improving the success rate of immediate assignment when the
Description transmission delay at Abis interface is long.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason This switch is disabled by default. It is only enabled in special scenarios.

This switch can be enabled in the case of low success rate of immediate
Configuration Rule and
assignment, which is caused by a long-delay transmission mode used at
Adjustment Suggestion
Abis interface, for example, transmission over satellite.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis/UM

Impact on Equipment 0

2-45

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.43 FO report for CS


Full Name FO report for CS

Abbreviation FOOption1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether to report the CS service failure obser-


Description vation.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason It is only used for fault location and is disabled by default.

Configuration Rule and The default value is recommended if TDD cells


Adjustment Suggestion are configured in the network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-46

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.611f

Parameter Modifying
Detail New

2.1.44 FO report for PS


Full Name FO report for PS

Abbreviation FOOption2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether to report the PS service failure obser-


Description vation.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason It is only used for fault location and is disabled by default.

Configuration Rule and The default value is recommended if TDD cells


Adjustment Suggestion are configured in the network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.611f

Parameter Modifying
Detail New

2-47

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.45 FO report for DBS


Full Name FO report for DBS

Abbreviation FOOption3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter specifies whether to report the DBS failure observation.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason It is only used for fault location and is disabled by default.

Configuration Rule and The default value is recommended if TDD cells


Adjustment Suggestion are configured in the network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.611f

Parameter Modifying
Detail New

2.1.46 Inter BSC handover out on SDCCH permitted


Full Name Inter BSC handover out on SDCCH permitted

Abbreviation InterBscSdHoOut

Managed Object GSM Logical Configuration

2-48

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether inter-BSC handover on the SDCCH


is allowed. When the parameter value is 1 (yes), the target cell of a
handover on SDCCH can be an external cell. When the parameter value
Description is 0, an external cell cannot be the target cell of a handover on SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

The default value of this parameter is set


Default Value to 0 due to the possibility that the MSC fails to appropriately process
Configuration Reason handover on SDCCH because an inter-BSC handover needs a long time
to be completed and the BSC has a large coverage in many cases.

Generally, it is recommended to set the parameter


value to 0. The parameter value can be set to 1 when inter-cell handover
Configuration Rule and
on SDCCH is necessary in some scenarios (for example, a scenario of
Adjustment Suggestion
motorway) and the MSC has a good capability for processing handover
on SDCCH.

Change Mode Offline

Related features ZGO-02-02-004 SDCCH/SDCCH Handover

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-49

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.47 The switch of connection and radio channel activating


synchronization
Full Name The switch of connection and radio channel activating synchronization

Abbreviation CallDelayCtrl

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether to allow simultaneous sending of


connection and channel activation commands.
At the Abis interface using E1 line for transport, the LAPD packet
generating has a long delay, which leads to long delay for message
interaction. When the BSC sends the connection command and
channel activation command to the BTS at the same time, the message
interaction delay can be reduced.
Description For IP mode, the delay reduction is not obvious.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value Newly added switch. The default configuration


Configuration Reason keeps the same with that of no switch.

If Abis interface adopts E1 transmission, it


is recommended to enable this switch, so as to reduce the delay of
Configuration Rule and
message interaction , and the delay of radio access (about 100ms).
Adjustment Suggestion
If the Abis interface adopts IP transmission, the delay is not reduced
obviously.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-50

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.48 Use BER to average quality


Full Name Use BER to average quality

Abbreviation RQavgUseBer

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to use BER to calculate the average


quality.
If the parameter is set to 1 (Yes), it is required to convert the RQ degree
to the BER before calculating the average.
If the parameter is set to 0 (No), use the RQ degree directly for
Description calculating the average.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Newly added switch. The default configuration


Configuration Reason keeps the same with that of no switch.

The calculation result when BER is used is


Configuration Rule and slightly different from that when the RQ level is directly used. It
Adjustment Suggestion is recommended to disable this switch if the handover success ratio
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-51

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.49 Check IMSI when access


Full Name Check IMSI when access

Abbreviation CheckImsiWhenAccess

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to check IMSI during access.


For some MSs, when accessing the network again after call drop, the
BSC may detect the IMSI conflict from the IMSI contained in the initial
access information, and then sends CLEAR REQ to the MSC. In this
case, a call drop is recorded both at the A interface and inside the BSC.
If the IMSI conflict is not checked, the BSC does not send CLEAR REQ
to the MSC, and the BSC does not record a call drop. In this case, the
MSC initiates the release procedure after detecting the IMSI conflict.
Description This will reduce the call drop records.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value Newly added switch. The default configuration


Configuration Reason keeps the same with that of no switch.

This function is in conflict with IMSI signalling


Configuration Rule and tracing. If the signalling tracing is enabled, you can take the default
Adjustment Suggestion value and do not enable this function. Otherwise, in other cases,
you can enable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-52

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.50 Include BTS power in MR


Full Name Include BTS power in MR

Abbreviation MrIncludeBtsPwr

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BTS power field is contained in the
Description MR.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

When the operator requires that the MR must


Default Value provide the BTS power or downlink path loss, and the MR analyzer
Configuration Reason supports
this function, configure this parameter to "Yes".

When the operator requires that the MR must


Configuration Rule and provide the BTS power or downlink path loss, and the MR analyzer
Adjustment Suggestion supports
this function, configure this parameter to "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-53

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.1.51 Measurement Result Recording Interval in MSC Invoke Trace


Full Name Measurement Result Recording Interval in MSC Invoke Trace

Abbreviation MITMRRecInt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the interval for sending the measurement report
to the Abis interface when tracing tasks are invoked. One record of mea-
surement report is sent when the number of received measurement report
Description reaches the parameter value.

Instance BSC

Value Range and Step 1..60

Unit N/A

Default Value 60

Default Value
Configuration Reason Only a few measurement reports are reported when tracing is invoked.

If more preprocessed measurement report samples are expected, set


Configuration Rule and
this parameter to a small value on condition that the load requirement
Adjustment Suggestion
is met.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-54

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.52 Preprocessed Measurement Result Recording Interval in


MSC Invoke Trace
Preprocessed Measurement Result Recording Interval in MSC Invoke
Full Name Trace

Abbreviation MITPrepMRRecInt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the interval for sending the preprocessed mea-
surement report to the Abis interface when tracing tasks are invoked. One
record of pre-processed measurement report is sent when the number of
Description received measurement report reaches the parameter value.

Instance BSC

Value Range and Step 1..60

Unit N/A

Default Value 15

Default Value
Configuration Reason Only a few measurement reports are reported when tracing is invoked.

If more preprocessed measurement report samples are expected, set


Configuration Rule and
this parameter to a small value on condition that the load requirement
Adjustment Suggestion
is met.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-55

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.53 Enhanced and Preprocessde MR report


Full Name Enhanced and Preprocessde MR report

Abbreviation EnhanAndPrepMrRpt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the enhanced and the pre-processed


measurement reports are reported. If this parameter is set to "Yes", the
TRACEID and a value (unit: ms) are attached to various measurement
Description reports.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

By default, this function is disabled. It is


Default Value
required to enable this function as required and when the MR analyzer
Configuration Reason
supports this function.

When the pre-processed or enhanced measurement


Configuration Rule and
reports need to be reported to the MR and the MR analyzer supports
Adjustment Suggestion
the analysis on these reports, enable this switch.

Change Mode Offline

Related features ZGO-06-01-005 Massive Measurement Report

Related Parameters MrRptEnable

Relationship The parameter is valid when R_BSC.MrRptEnable is set to Yes.

Related Interfaces N/A

Impact on Equipment 0

2-56

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.54 Preferred speech version for FR


Full Name Preferred speech version for FR

Abbreviation preferSpeechVerFr

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the preferred full-rate speech version in the CS


channel allocation. Full rate version1 refers to FR. Full rate version2 refers
Description to EFR and version3 refers to AMR.

Instance BSC

0:(Not Valid
1:Full rate speech version 1:GSM FR
2:Full rate speech version 2:GSM EFR
3:Full rate speech version 3:FR AMR
4:Full rate speech version 4:OFR AMR-WB
Value Range and Step 5:Full rate speech version 5:FR AMR-WB

Unit N/A

Default Value 0

Default Value
Configuration Reason To be decided by MSC

It is recommended to use the default value and allow the MSC to decide
the speech version unless otherwise necessary.
If you modify the default value, the new value will decide the speech
Configuration Rule and version.
Adjustment Suggestion Generally, ERF can provide the best voice quality and user satisfaction.
AMR enables the adaptive switching of coding rates. In poor channel
conditions, increasing the channel coding rate (increasing redundant
bits) and reducing the source (speech) coding rate can ensure the

2-57

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

conversation quality. In good channel conditions, increasing the source


coding rate can improve the voice quality.

Change Mode Offline

Related features ZGB-01-01-001 Full Rate (FR) Speech Codec

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.55 Preferred speech version for HR


Full Name Preferred speech version for HR

Abbreviation preferSpeechVerHr

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

When implementing the CS channel allocation policy, describe the pre-


ferred half-rate speech version. Half-rate version 1 refers to HR, and ver-
Description sion 3 for AMR.

Instance BSC

0:Not Valid
1:Half rate speech version 1:GSM HR
3:Half rate speech version 3:HR AMR
Value Range and Step 4:Half rate speech version 4:OHR AMR-WB

Unit N/A

Default Value 0

Default Value
Configuration Reason To be decided by MSC

2-58

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It is recommended to use the default value and allow the MSC to decide
the speech version unless otherwise necessary.
If you modify the default value, the new value will decide the speech
version.
Configuration Rule and
Generally, AMR enables the adaptive switching of coding rates. In
Adjustment Suggestion
poor channel conditions, increasing the channel coding rate (increasing
redundant bits) and reducing the source (speech) coding rate can
ensure the conversation quality. In good channel conditions, increasing
the source coding rate can improve the voice quality.

Change Mode Offline

Related features ZGO-01-01-001 Half Rate

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.56 Dynamic HR support indication


Full Name Dynamic HR support indication

Abbreviation DynaHREnable

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether the BSC supports dynamic HR. The dy-
namic HR channel allocation function enables the network to allocate
full-rate or half-rate channels to MSs according to the traffic in the cell
when it allocate channels for the MSs. Allocating half-rate channels when
the channels in the cell are likely to be congested minimizes the duration
Description of possible congestions in peak hours.

Instance BSC

2-59

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and When the user number is reach or exceed the cell capability, the switch
Adjustment Suggestion can be open to extend the cell capability.

Change Mode Offline

Related features ZGO-03-02-005--Dynamic Half Rate Allocation

Related Parameters DynaHREnable

Full-rate channels can be converted to half-rate channels only when the


Relationship
BSC-level and cell-level DynaHREnable is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.57 HR channel fragment finishing support


Full Name HR channel fragment finishing support

Abbreviation HRDfragSupport

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a switch to support the HR channel defragmentation


function and can be configured on both BSCs and cells. The HR channel
defragmentation function is enabled only when both BSC- and cell-level
switches are enabled and the proportion of the idle TCH/Fs in these cells is
not more than the threshold proportion of the TCH/Fs to the total available
Description service channels in the cell where the defragmentation is enabled.

2-60

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling the HR channel defragmentation function


in a cell where dynamic half rate is used can increase full-rate channels
and improve voice quality. Enabling the function on dynamic channels
Configuration Rule and
can increase available PS channels. The function can be enabled as
Adjustment Suggestion
needed. If it is enabled, the corresponding switch in cell parameters
must be enabled at the same time. In this case, more handovers will
occur in cells.

Change Mode Offline

Related features ZGO-03-02-004 HR Concentration

Related Parameters HoIntraEnable


HRDfragSupport

This function can be enabled only when HoIntraEnable and BSC- and
Relationship
cell-level HRDfragSupport in the system control parameters are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.58 BCCH switch allowed


Full Name BCCH switch allowed

Abbreviation CanBcchExch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-61

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates whether dynamic BCCH switchover function is


enabled on the BSC. Another prerequisite of successful dynamic BCCH
Description switchover in a cell is that this function is also enabled in the cell.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Enable this switch when the BCCH shift function
Adjustment Suggestion is required.

Change Mode Offline

Related features ZGO-03-04-001 Automatic BCCH Recovery

Related Parameters CanBcchExch

This parameter is valid only when the BSC-level CanBcchExch and


Relationship
cell-level CanBcchExch are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.59 Dynamic configuration SDCCH


Full Name Dynamic configuration SDCCH

Abbreviation CanSdcchDyn

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-62

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether dynamic SDCCH/TCH conversion is


enabled in the BSC. The network can dynamically perform conversions
between SDCCH and TCH when this function is enabled. Another pre-
requisite of successful dynamic DCCH/TCH conversion in a cell is that
Description this function is also enabled in the cell.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and The dynamic SDCCH/TCH conversion function of


Adjustment Suggestion the BSC cannot be enabled unless this switch is enabled.

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters CanSdcchDyn

The dynamic SDCCH/TCH conversion function only takes effect when


Relationship
the functional switch of the BSC and that of the cell are both enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.60 Scan SDCCH


Full Name Scan SDCCH

Abbreviation ScanSdcch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-63

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the period of scanning idle SDCCHs when the
dynamic SDCCH/TCH conversion function is enabled in a cell. After the
dynamic SDCCH/TCH conversion function is enabled in a network, the
network scans SDCCHs at the period specified by this parameter to find
the number of idle SDCCHs for determining whether to convert SDCCH
Description back to TCH.

Instance BSC

Value Range and Step 10..1000

Unit 100ms

Default Value 100

Generally, a period of 10 seconds or so is


Default Value
appropriate to scan SDCCHs for determining whether to convert SDCCH
Configuration Reason
back to TCH.

The default value is recommended. A larger


Configuration Rule and parameter indicates a longer scanning period. And correspondingly,
Adjustment Suggestion the conversion from SDCCH (which used to be converted from TCH) to
TCH needs longer time.

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.61 Scan BCCH


Full Name Scan BCCH

Abbreviation ScanBcch

Managed Object GSM Logical Configuration

3GPP Name N/A

2-64

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter specifies the period for scanning the availability of BCCH
TRX when the dynamic BCCH shift function is enabled in the cell. When
the dynamic BCCH shift function is enabled, the network will scan the
status of BCCH TRXs at the specified period and check whether the shift
criterion is fulfilled. This parameter can reflect the response time of a
Description BCCH TRX failure.

Instance BSC

Value Range and Step 600..9000

Unit 100ms

Default Value 3000

A period of five minutes is appropriate, in


Default Value
which the network can find the cell that needs a BCCH shift in a short
Configuration Reason
time and the system load will not be impacted.

Configuration Rule and It is recommended that the default value be


Adjustment Suggestion used.

Change Mode Offline

Related features ZGO-03-04-001 Automatic BCCH Recovery

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.62 BCCH starting delay


Full Name BCCH starting delay

Abbreviation BcchDelay

Managed Object GSM Logical Configuration

3GPP Name N/A

2-65

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates the initial delay before a BCCH shift. The net-
work will check the status of BCCH TRX when the timer expires. If a
Description BCCH shift is needed, the network initiates a shift process.

Instance BSC

Value Range and Step 20..1800

Unit 100ms

Default Value 1200

Default Value A delay of two minutes can avoid a BCCH shift


Configuration Reason triggered by a reset of TRU, or temporary block.

Configuration Rule and It is recommended that the default value be


Adjustment Suggestion used.

Change Mode Offline

Related features ZGO-03-04-001 Automatic BCCH Recovery

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.63 BCCH finishing delay


Full Name BCCH finishing delay

Abbreviation ReBcchEx

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

It indicates delay time before finishing BCCH handover, BTS block mes-
sage is received after timer is timeout or BTS block is failed select
Description handover TRX to do handover.

2-66

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 20..1800

Unit 100ms

Default Value 1200

Generally, the BSC can receive a success or


Default Value
failure response after it sends a TRX block or unblock message to
Configuration Reason
the BTS.

Configuration Rule and It is recommended that the default value be


Adjustment Suggestion used.

Change Mode Offline

Related features ZGO-03-04-001 Automatic BCCH Recovery

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.64 TCH->SDCCH limit


Full Name TCH->SDCCH limit

Abbreviation MinSdcch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the threshold that triggers a TCH-to-SDCCH


conversion in a cell where SDCCH dynamic configuration is enabled.
When the number of idle SDCCHs is lower than this threshold, a TCH-
Description to-SDCCH conversion is performed.

Instance BSC

Value Range and Step 2..64

2-67

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 4

The default threshold is 4, that is, a dynamic


Default Value SDCCH conversion is generally required when the number of idle
Configuration Reason SDCCHs
is less than 4.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.65 SDCCH->TCH delay


Full Name SDCCH->TCH delay

Abbreviation TimeToTch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is used to enable dynamic SDCCH configuration function


in the cell. After TCH is dynamically converted to SDCCH channel and
SDCCH channel is idle, to prevent from frequent channel conversion, a
time limit will be added for the conversion from SDCCH channel to TCH
channel. During this limit, SDCCH channel cannot be converted to TCH
Description channel.

Instance BSC

2-68

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..24

Unit N/A

Default Value 0

The default value is 4. That is, SDCCH-to-TCH


conversion is performed after two SDCCH scanning periods when
Default Value
enough
Configuration Reason
idle SDCCHs are available, preventing frequent conversions between
SDCCH and TCH.

Set a larger value for this parameter if a


Configuration Rule and longer delay is wanted before SDCCH-to-TCH conversion. An
Adjustment Suggestion appropriate
parameter value is the sum of a multiple of 3 and the number 1.

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters ScanSDCCH

TimeToTch is a step determining the delay before


Relationship a SDCCH-to-TCH conversion. The actual delay time equals to
(TimeToTch/3+1)*ScanSDCCH.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.66 Minimum Tch reserved for dynamic SDCCH


Full Name Minimum Tch reserved for dynamic SDCCH

Abbreviation MinTch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-69

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If dynamic SD conversion is enabled, the conversion TCH->SDCCH re-


quires to check the number of idle TCHs in the cell and No. 1 sub-cell. If
Description the number is greater than MinTch, the switchover is allowed.

Instance BSC

Value Range and Step 1..64

Unit N/A

Default Value 4

By default, the handover is performed only when the number of idle


Default Value
TCH channels is greater than 4, to prevent the TCH service channel
Configuration Reason
from congestion.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters CanSDCCHDyn

This parameter is valid only when the CanSDCCHDyn


Relationship
switch is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.67
Baseband frequency hopping
TRX exchange support
Baseband frequency hopping
Full Name TRX exchange support

Abbreviation BHTESupp

Managed Object GSM Logical Configuration

2-70

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the base band hopping switch-over is


supported. This function is supported only when the all switches at the
BSC level and Cell level are all enabled. When a carrier of the base band
hopping group is in fault, the system will automatically move and keep the
Description faulty frequency out of the group until it resumes.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value This parameter is a switch for a function.


Configuration Reason It is turned off by default.

Baseband frequency hopping switchover is an auxiliary O&M function


of baseband frequency hopping. In a system that is configured with
Configuration Rule and
baseband frequency hopping, this function can prevent some failed
Adjustment Suggestion
carriers from affecting all carriers in the frequency hopping group.
If you set this parameter to Yes, the function is enabled.

Change Mode Offline

Related features N/A

Related Parameters SupBBHopExChange

A cell supports the base band frequency hopping


switch-over only when the switches in BSC level and cell level
Relationship
parameters
are set "Yes".

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-71

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.68 The method of intelligent TRX poweroff


Full Name The method of intelligent TRX poweroff

Abbreviation powerCond

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

When the intelligent poweroff function is enabled, this parameter indicates


Description the criterion for choosing a power-off carrier.

Instance BSC

0: The Traffic of each line


Value Range and Step 1: The peak of busy channel ratio

Unit N/A

Default Value 0

Default Value Normally use The Traffic of each line to deside trx shutdown whether or
Configuration Reason not.

Carrier poweroff affects the channel resources


of the cell. However, the traffic per channel does not reflect the
Configuration Rule and
changes of these channel resources. Peak channel load can reflect
Adjustment Suggestion
the occupancy of the channel resources. However, frequent poweron
and poweroff must be avoided.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-72

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.69 IBS shutdown limit


Full Name IBS shutdown limit

Abbreviation powerDownLimit

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

When the average traffic per channel in a cell is lower than the value of
this parameter, a carrier frequency is required to be closed in the cell, and
Description the cell is added to the power-off cell list.

Instance BSC

Value Range and Step 0..70

Unit %

Default Value 30

Default Value Generally, if the cell traffic is lower than 30%, the cell is idle and
Configuration Reason intelligent carrier power-down can be performed.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.70 IBS powerup limit


Full Name IBS powerup limit

Abbreviation powerUpLimit

2-73

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

When the average traffic per channel in a cell is greater than the value
of this parameter, a carrier frequency is required to be powered on in the
Description cell, and the cell is added to the power-on cell list.

Instance BSC

Value Range and Step 0..90

Unit %

Default Value 60

Default Value Generally, if the cell traffic reaches 60%, the cell is busy and the carrier
Configuration Reason needs to be powered up.

Configuration Rule and The default value is recommended. The value can be slightly adjusted
Adjustment Suggestion in accordance with on-site traffic.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.71 IBS powerover limit


Full Name IBS powerover limit

Abbreviation powerOverLmt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-74

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

During channel request and handover decision, if the load of the cell or
Description subcell exceeds the parameter value, the carrier is notified to power on.

Instance BSC

Value Range and Step 70..95

Unit %

Default Value 90

Default Value Generally, if the cell traffic reaches 60%, the cell is very busy and the
Configuration Reason carrier needs to be powered up emergently, to avoid congestion.

Configuration Rule and The default value is recommended. The value can be slightly adjusted
Adjustment Suggestion in accordance with on-site traffic.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.72 IBS power priority


Full Name IBS power priority

Abbreviation powerPriority

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-75

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies the sequence for intelligent carrier power-off.


Set the carrier priority and interference band class according to this pa-
rameter, and set different weights for the carrier priority and the interfer-
ence band. The priority for carrier power-off or power-on is decided by
the value of the formula (Carrier priority * weight A + interference band *
Description weight B), with consideration of the TRU operation mode and type.

Instance BSC

1: Carrier priority>interference band


2: interference band>carrier priority
3: only as per interference band
Value Range and Step 4: only as per carrier priority

Unit N/A

Default Value 1

Default Value Generally, the priority of carriers is considered to be greater than that of
Configuration Reason the interference frequency band, and can be adjusted at the background.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.73 BCCH forbidden TS merger time bitmap


Full Name BCCH forbidden TS merger time bitmap

Abbreviation bcchForbiddenBmp

Managed Object GSM Logical Configuration

3GPP Name N/A

2-76

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter is a bit map used to specify whether time slot (TS) is for-
Description bidden to be merged on the BCCH for different time.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

Default Value
Configuration Reason It is 0 by default. That is, all periods of time can be merged.

Configuration Rule and


Adjustment Suggestion The value can be set in accordance with perforamce statistics on site.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.74 The master power control option of intelligent TRX poweroff


system
Full Name The master power control option of intelligent TRX poweroff system

Abbreviation MasterPwCtrlOp

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-77

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies whether intelligent power-off is allowed after the


Description main power is powered off.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value This parameter is a functional switch, which


Configuration Reason disabled by default.

Configuration Rule and


Adjustment Suggestion Configure this parameter based on the telecom operator's requirement.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.75 Baseband resource share support


Full Name Baseband resource share support

Abbreviation BasebandShare

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a BSC-level switch used to specify whether baseband


Description resource sharing is enabled.

Instance BSC

2-78

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and If the traffic distributes in tide mode, this


Adjustment Suggestion function can be enabled according to operator requirements.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters BaseBandShare

Relationship This switch is a BSC-level and site-level switch.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.76 TRX Selection priority for baseband share


Full Name TRX Selection priority for baseband share

Abbreviation BBSharePri

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the carrier selection sequence for the sharing
Description of baseband resources.

Instance BSC

Value Range and Step 1..4

Unit N/A

Default Value 1

2-79

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Baseband resources are prior to be allocated


Configuration Reason for the carriers with high priority and low interference band.

Configuration Rule and Baseband resources are prior to be allocated


Adjustment Suggestion for the carriers with high priority and low interference band.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters BaseBandShare

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.77 Number of BA Ranges


Full Name Number of BA Ranges

Abbreviation rangeNum

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the number of BA ranges that can be monitored


Description with priority by an idle MS during re-selection.

Instance BSC

Value Range and Step 1..257

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value needs to be adjusted in actual use.

Configuration Rule and


Adjustment Suggestion The value should be set in accordance with on-site radio environment.

2-80

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.78 BA Range Lower


Full Name BA Range Lower

Abbreviation rangeLow

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the upper threshold of channel number within


Description each BA range monitored by an idle MS during re-selection.

Instance BSC

Value Range and Step 0..124, 128..251, 512..885, 975..1023

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value needs to be adjusted in actual use.

Configuration Rule and


Adjustment Suggestion The value should be set in accordance with on-site radio environment.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship rangeLow<=rangeHigh

2-81

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.79 BA Range Higher


Full Name BA Range Higher

Abbreviation rangeHigh

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the lower threshold of channel number within


Description each BA range monitored by an idle MS during re-selection.

Instance BSC

Value Range and Step 0..124, 128..251, 512..885, 975..1023

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value needs to be adjusted in actual use.

Configuration Rule and


Adjustment Suggestion The value should be set in accordance with on-site radio environment.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship rangeLow<=rangeHigh

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-82

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.80 If get Utran classmark information from UE


Full Name If get Utran classmark information from UE

Abbreviation GetUtranClass

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether BSC initiates a classmark request, ask-


ing the UE to report its UtranClassmark information after the UE performs
handover from 3G network to 2G network. During a handover from the 3G
network to the 2G network, it is possible that the handover request does
not contain the UEs UtranClassmark information, or contains improper
information. This would cause failures when the UE performs 2G->3G
Description handover later.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value The classmark request procedure increases the


Configuration Reason system load, so the switch is off generally.

If the connected RNC sends a handover request


Configuration Rule and
with incomplete or outdated information, which reduces the success
Adjustment Suggestion
rate for 2G-to-3G handover, enabling the feature is necessary.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-83

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.1.81 IPA AMR start mode


Full Name IPA AMR start mode

Abbreviation IPAAmrStartMode

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the initial AMR rate when IPA is applied. When
IPA is applied, the ACS of AMR speech coding modes is specified by
the MSC, so the initial rate cannot be exactly decided. For this reason,
the default rate or the maximum rate is used as the initial rate, and this
applies when ACS is a rate set.
When this parameter is set to Default, the initial rate is coded according
to the default value specified in the protocol 45.009.
When one mode is used, the corresponding rate is used as the initial
coding mode.
When two or three modes are used, the lowest rate is used as the
initial coding mode.
When four modes are used, the second lowest rate is used as the initial
Description coding mode.

Instance BSC

0: Use the mode implicitly defined in 3GPP TS 45.009


Value Range and Step 1: Use the mode of Max rate

Unit N/A

Default Value 0

When the default initial rate is used, the


Default Value
initial rate is a strong coding mode that applies to the cases in
Configuration Reason
which the radio signal quality is poor.

Generally, the default initial rate is recommended.


Configuration Rule and
When the radio signal quality of the cell is good, you can use the
Adjustment Suggestion
maximum rate as the initial rate.

2-84

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-05-04-003 A over IP

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.82 Send OVERLOAD message to MSC


Full Name Send OVERLOAD message to MSC

Abbreviation SendOverLoadToMSC

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Send OVERLOAD message to MSC

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Considering that the overload message may trigger flow control at the
Configuration Reason MSC side, set it to No if not negotiated with the MSC.

Configure this parameter after negotiation with the MSC side and
Configuration Rule and
consideration of any possible results. Also, the configuration needs
Adjustment Suggestion
approval from the telecom operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-85

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.1.83 Use Load of Subcell1 as Load of Cell


Full Name Use Load of Subcell1 as Load of Cell

Abbreviation UseSC1Load

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

If this parameter is set to 1 (yes), the load of the first subcell is used as
the whole cell load, and applied for neighbor cell sorting, traffic handover
decision.
If this parameter is set to 0 (No), the whole cell load is used, including
Description the first and second subcell.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

The default value is set to 1, to avoid handover to the busy cell in the
Default Value first subcell. Channel resources in the second subcell are adequate,
Configuration Reason while channel resources in the first subcell are tight, so the entire cell
load is not high.

Set this parameter to 0 only when the first sub-cell has sufficient channel
Configuration Rule and
resources, or the second sub-cell has a good coverage and configured
Adjustment Suggestion
as the direct handover object.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

2-86

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.1.84 Enough MS MR For Connection Failure After Handover


Full Name Enough MS MR For Connection Failure After Handover

Abbreviation MrCountForRlt

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Upon receiving the Handover Complete message from the MS, the BSC
starts counting the MRs with L3 messages. If the count of MRs with L3
messages is not greater than the value of this parameter when the BSC
receives the Connection Failure message, a call drop occurs, and either
of the following two counters is incremented according to the source
cell of the handover:
Counter 1: Number of few MS MR received before connection failure
after handover from adjacent cell
Counter 2: Number of few MS MR received before connection failure
Description after handover from adjacent 3G cell

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

The default value is 3 measurements that occur in a short time. If the


Default Value
default value is too large, calldrop may not occur immediately after
Configuration Reason
handover.

2-87

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally, this parameter needs no modification. Adjust this parameter if


Configuration Rule and
particular statistictic is required after call drop data is obtained through
Adjustment Suggestion
the signaling tracing tool.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.1.85 Ts Block Alarm Switch


Full Name Ts Block Alarm Switch

Abbreviation TsBlockAlarmSwitch

Managed Object GSM Logical Configuration

3GPP Name None

3GPP Reference N/A

This parameter is a switch for raising the air interface timeslot blocking
Description alarm.

Instance BSC

0: close
Value Range and Step 1: open

Unit N/A

Default Value 0

Default Value
Configuration Reason This is a functional switch and is disabled by default.

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

2-88

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.86 BVC Block Alarm Switch


Full Name BVC Block Alarm Switch

Abbreviation BVCAlarmSwitch

Managed Object GSM Logical Configuration

3GPP Name None

3GPP Reference N/A

Description The parameter is the switch for raising the BVC manual blocking alarm.

Instance BSC

0: close
Value Range and Step 1: open

Unit N/A

Default Value 0

Default Value
Configuration Reason This is a functional switch and is disabled by default.

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-89

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.87 AMR full Active Codec Set(4.75kbps)


Full Name AMR full Active Codec Set(4.75kbps)

Abbreviation amrFullAcs1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the


Description 4.75kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-90

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.88 AMR full Active Codec Set(5.15kbps)


Full Name AMR full Active Codec Set(5.15kbps)

Abbreviation amrFullAcs2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 5.15
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-91

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.1.89 AMR full Active Codec Set(5.9kbps)


Full Name AMR full Active Codec Set(5.9kbps)

Abbreviation amrFullAcs3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 5.9
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-92

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.90 AMR full Active Codec Set(6.7kbps)


Full Name AMR full Active Codec Set(6.7kbps)

Abbreviation amrFullAcs4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 6.7
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.91 AMR full Active Codec Set(7.4kbps)


Full Name AMR full Active Codec Set(7.4kbps)

Abbreviation amrFullAcs5

2-93

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 7.4
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.92 AMR full Active Codec Set(7.95kbps)


Full Name AMR full Active Codec Set(7.95kbps)

Abbreviation amrFullAcs6

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-94

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies whether the ACS of AMR FR contains the 7.95
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.93 AMR full Active Codec Set(10.2kbps)


Full Name AMR full Active Codec Set(10.2kbps)

Abbreviation amrFullAcs7

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 10.2
Description kbps codec mode.

Instance BSC

2-95

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.94 AMR full Active Codec Set(12.2kbps)


Full Name AMR full Active Codec Set(12.2kbps)

Abbreviation amrFullAcs8

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 12.2
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

2-96

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.95 AMR Half Active Codec Set(4.75kbps)


Full Name AMR Half Active Codec Set(4.75kbps)

Abbreviation amrHalfAcs1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 4.75
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

2-97

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.96 AMR Half Active Codec Set(5.15kbps)


Full Name AMR Half Active Codec Set(5.15kbps)

Abbreviation amrHalfAcs2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 5.15
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

2-98

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.97 AMR Half Active Codec Set(5.9kbps)


Full Name AMR Half Active Codec Set(5.9kbps)

Abbreviation amrHalfAcs3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 5.9
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

2-99

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.98 AMR Half Active Codec Set(6.7kbps)


Full Name AMR Half Active Codec Set(6.7kbps)

Abbreviation amrHalfAcs4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 6.7
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-100

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.99 AMR Half Active Codec Set(7.4kbps)


Full Name AMR Half Active Codec Set(7.4kbps)

Abbreviation amrHalfAcs5

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 7.4
Description kbps codec mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signal
Configuration Rule and
quality in a cell is comparatively good, select high rate only. When the
Adjustment Suggestion
radio signal quality in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-101

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.100 Thresholds of AMR FR 1


Full Name Thresholds of AMR FR 1

Abbreviation amrFrThresholds1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 4.75kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 13

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds2


amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

2-102

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.101 Thresholds of AMR FR 2


Full Name Thresholds of AMR FR 2

Abbreviation amrFrThresholds2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 5.15 kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 14

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-103

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrThresholds1


amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.102 Thresholds of AMR FR 3


Full Name Thresholds of AMR FR 3

Abbreviation amrFrThresholds3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 5.9kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 15

2-104

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.103 Thresholds of AMR FR 4


Full Name Thresholds of AMR FR 4

Abbreviation amrFrThresholds4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-105

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 6.7kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 17

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-106

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.104 Thresholds of AMR FR 5


Full Name Thresholds of AMR FR 5

Abbreviation amrFrThresholds5

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 7.4kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 18

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-107

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.105 Thresholds of AMR FR 6


Full Name Thresholds of AMR FR 6

Abbreviation amrFrThresholds6

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 7.95kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

2-108

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.106 Thresholds of AMR FR 7


Full Name Thresholds of AMR FR 7

Abbreviation amrFrThresholds7

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 10.2kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 23

Default Value The default value consists of the carrier-to-interference ratios required in
Configuration Reason different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-109

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.107 Thresholds of AMR HR 1


Full Name Thresholds of AMR HR 1

Abbreviation amrHrThresholds1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 4.75kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 18

2-110

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds2


amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.108 Thresholds of AMR HR 2


Full Name Thresholds of AMR HR 2

Abbreviation amrHrThresholds2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 5.15kbps.

Instance BSC

Value Range and Step 0..63

2-111

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 20

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.109 Thresholds of AMR HR 3


Full Name Thresholds of AMR HR 3

Abbreviation amrHrThresholds3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 5.9kbps.

2-112

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 23

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.110 Thresholds of AMR HR 4


Full Name Thresholds of AMR HR 4

Abbreviation amrHrThresholds4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-113

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 6.7kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 26

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.111 Thresholds of AMR HR 5


Full Name Thresholds of AMR HR 5

Abbreviation amrHrThresholds5

Managed Object GSM Logical Configuration

2-114

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 7.4kbps.

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 30

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.112 Hysteresis of AMR FR 1


Full Name Hysteresis of AMR FR 1

2-115

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation amrFrHysteresis1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 4.75kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-116

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.113 Hysteresis of AMR FR 2


Full Name Hysteresis of AMR FR 2

Abbreviation amrFrHysteresis2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 5.15kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5

2-117

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.114 Hysteresis of AMR FR 3


Full Name Hysteresis of AMR FR 3

Abbreviation amrFrHysteresis3

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 5.9kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-118

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.115 Hysteresis of AMR FR 4


Full Name Hysteresis of AMR FR 4

Abbreviation amrFrHysteresis4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 6.7kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

2-119

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.116 Hysteresis of AMR FR 5


Full Name Hysteresis of AMR FR 5

Abbreviation amrFrHysteresis5

Managed Object GSM Logical Configuration

2-120

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 7.4kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

2-121

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.1.117 Hysteresis of AMR FR 6


Full Name Hysteresis of AMR FR 6

Abbreviation amrFrHysteresis6

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 7.95kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis7

2-122

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.118 Hysteresis of AMR FR 7


Full Name Hysteresis of AMR FR 7

Abbreviation amrFrHysteresis7

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 10.2kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-123

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.119 Hysteresis of AMR HR 1


Full Name Hysteresis of AMR HR 1

Abbreviation amrHrHysteresis1

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 4.75kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

2-124

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustments (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.120 Hysteresis of AMR HR 2


Full Name Hysteresis of AMR HR 2

Abbreviation amrHrHysteresis2

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 5.15kbps.

2-125

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustments (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.121 Hysteresis of AMR HR 3


Full Name Hysteresis of AMR HR 3

Abbreviation amrHrHysteresis3

2-126

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 5.9kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustments (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-127

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.122 Hysteresis of AMR HR 4


Full Name Hysteresis of AMR HR 4

Abbreviation amrHrHysteresis4

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 6.7kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustments (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-128

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.123 Hysteresis of AMR HR 5


Full Name Hysteresis of AMR HR 5

Abbreviation amrHrHysteresis5

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 7.4kbps.

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustments (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4

Relationship N/A

Related Interfaces N/A

2-129

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.124 Enable AMR FR noise control


Full Name Enable AMR FR noise control

Abbreviation amrFrNscb

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter specifies whether the AMR noise suppression on the


MS is disabled for the AMRFR speech version. The noise suppression
function on the MS keeps the speech quality by controlling the
background noise.
No: Noise control can be enabled.
Description Yes: Noise control is disabled.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value Enabling noise suppression can eliminate noise and improve voice
Configuration Reason quality.

Configuration Rule and Generally, enable the noise suppression function. When speech voice is
Adjustment Suggestion degraded, pay attention to the parameter setting.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-130

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.125 AMR FR Initial codec mode


Full Name AMR FR Initial codec mode

Abbreviation amrFrIcm

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter indicates the initial speech codec mode of AMR FR


employs the mode specified by Startmode or the default initial codec
mode specified in protocol 45.009. The initial codec mode specified in
the protocol is described as follows:
1. When there is one codec mode, this mode is employed as the initial
mode.
2. When there are two or three codec modes, the lowest speed mode
is employed as the initial mode.
3. When there are four modes, the mode with the second lowest speed
is employed as the initial mode.
For the A interface using IP, this parameter is not used. Instead, the
system control parameter IpaAMRStartMode decides the initial codec
Description mode.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Set the initial codec mode as required

Configuration Rule and If initial rate needs no special consideration, set this parameter to Start
Adjustment Suggestion Coding Mode", meaning the default initial rate specified in the protocol.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-131

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.126 AMR FR Start mode


Full Name AMR FR Start mode

Abbreviation amrFrStartMode

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter decides the initial codec mode for the AMR FR speech
version. The value must not be larger than the number of codec modes
contained in the ACS. The parameter values are described as follows:
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest speed
3: the initial codec mode employs the one with the third lowest speed
Description 4: the initial codec mode employs the one with the forth lowest speed

Instance BSC

Value Range and Step 1..4

Unit N/A

Default Value 4

Default Value
Configuration Reason Use both high rate and low rate.

Configuration Rule and When radio signal quality in a cell is good, set this parameter to a higher
Adjustment Suggestion initial rate.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-132

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrFullAcs1


amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.127 Enable AMR HR noise control


Full Name Enable AMR HR noise control

Abbreviation amrHrNscb

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter specifies whether the AMR noise suppression on the


MS is disabled for the AMRHR speech version. The noise suppression
function on the MS keeps the speech quality by controlling the
background noise.
No: Noise control can be enabled.
Description Yes: Noise control is disabled.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

2-133

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Enabling noise suppression can eliminate noise and improve voice
Configuration Reason quality.

Configuration Rule and Generally, enable the noise suppression function. When speech voice is
Adjustment Suggestion degraded, pay attention to the parameter setting.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.128 AMR HR Initial codec mode


Full Name AMR HR Initial codec mode

Abbreviation amrHrIcm

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter indicates the initial speech codec mode of AMR HR


employs the mode specified by Startmode or the default initial codec
mode specified in protocol 45.009. The initial codec mode specified in
the protocol is described as follows:
1. When there is one codec mode, this mode is employed as the initial
mode.
2. When there are two or three codec modes, the lowest speed mode
is employed as the initial mode.
3. When there are four modes, the mode with the second lowest speed
is employed as the initial mode.
For the A interface using IP, this parameter is not used. Instead, the
system control parameter IpaAMRStartMode decides the initial codec
Description mode.

2-134

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Set the initial codec mode as required

Configuration Rule and If initial rate needs no special consideration, set this parameter to "Start
Adjustment Suggestion Coding Mode", meaning the default initial rate specified in the protocol.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.129 AMR HR Start mode


Full Name AMR HR Start mode

Abbreviation amrHrStartMode

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter decides the initial codec mode for the AMR HR speech
version. The value must not be larger than the number of codec modes
contained in the ACS. The parameter values are described as follows:
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest speed
3: the initial codec mode employs the one with the third lowest speed
Description 4: the initial codec mode employs the one with the forth lowest speed

2-135

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance BSC

Value Range and Step 1..4

Unit N/A

Default Value 3

Default Value Using the lowest coding mode can ensure that comparatively good voice
Configuration Reason quality can be provided in bad radio condition.

Configuration Rule and If the radio quality is good, use a higher initial rate to improve the voice
Adjustment Suggestion quality.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHalfAcs1


amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
amrHrIcm

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.130 Hysteresis of AMRWFS 1


Full Name Hysteresis of AMRWFS 1

Abbreviation amrWfsHysteresis1

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

2-136

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-137

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.131 Hysteresis of AMRWFS 2


Full Name Hysteresis of AMRWFS 2

Abbreviation amrWfsHysteresis2

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-138

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.132 Hysteresis of AMRWFS 3


Full Name Hysteresis of AMRWFS 3

Abbreviation amrWfsHysteresis3

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

2-139

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.133 Hysteresis of AMRWFS 4


Full Name Hysteresis of AMRWFS 4

Abbreviation amrWfsHysteresis4

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

2-140

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.134 Hysteresis of AMROWFS 1


Full Name Hysteresis of AMROWFS 1

Abbreviation amrOwfsHysteresis1

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance BSC

2-141

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.135 Hysteresis of AMROWFS 2


Full Name Hysteresis of AMROWFS 2

Abbreviation amrOwfsHysteresis2

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

2-142

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-143

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.136 Hysteresis of AMROWHS 1


Full Name Hysteresis of AMROWHS 1

Abbreviation amrOwhsHysteresis1

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

2-144

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.137 Hysteresis of AMROWHS 2


Full Name Hysteresis of AMROWHS 2

Abbreviation amrOwhsHysteresis2

Managed Object GSM Logical Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance BSC

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

2-145

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.138 Thresholds for AMRWFS 1


Full Name Thresholds for AMRWFS 1

Abbreviation amrWfsThresholds1

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
(1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

2-146

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.139 Thresholds for AMRWFS 2


Full Name Thresholds for AMRWFS 2

Abbreviation amrWfsThresholds2

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
(1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..63

Unit N/A

2-147

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.140 Thresholds for AMRWFS 3


Full Name Thresholds for AMRWFS 3

Abbreviation amrWfsThresholds3

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

2-148

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
(1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-149

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.141 Thresholds for AMRWFS 4


Full Name Thresholds for AMRWFS 4

Abbreviation amrWfsThresholds4

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
(1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

2-150

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.142 Thresholds for AMROWFS 1


Full Name Thresholds for AMROWFS 1

Abbreviation amrOwfsThresholds1

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

2-151

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.143 Thresholds for AMROWFS 2


Full Name Thresholds for AMROWFS 2

Abbreviation amrOwfsThresholds2

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

2-152

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.144 Thresholds for AMROWHS 1


Full Name Thresholds for AMROWHS 1

Abbreviation amrOwhsThresholds1

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance BSC

2-153

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.145 Thresholds for AMROWHS 2


Full Name Thresholds for AMROWHS 2

Abbreviation amrOwhsThresholds2

Managed Object GSM Logical Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

2-154

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance BSC

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.1.146 Busy threshold of sub cell


Full Name Busy threshold of sub cell

2-155

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation resLimitMove

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Channel reformation and migration is implemented by intra-cell handover


and temporarily occupies more cell channels. Only when the cell channel
use rate is lower than or equal to this parameter value, channle reforma-
Description tion and migration can be performed.

Instance BSC

Value Range and Step 40..100

Unit N/A

Default Value 80

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.147 Support of SON Transfer Application


Full Name Support of SON Transfer Application

Abbreviation SONTrans

Managed Object GSM Logical Configuration

2-156

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the BSC supports a SON transfer ap-
plication. The parameter is used with the RIMSupport parameter. When
the SONTrans function is enabled, the RIMSupport function must also be
enabled. In this case, the BSC can reply to a request of acquiring GSM
cell loads from the external UTRAN or E-UTRAN network through a Gb
interface during the RAN Information Management (RIM) process, and
Description synchronizes the loads to the external network.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Function enabled or disabled. The function is disabled by default.

Configuration Rule and The parameter is set in accordance with a network operation
Adjustment Suggestion requirement.

Change Mode Offline

Related features N/A

Related Parameters RIMSupport

SON Transfer and RIMSupport are set independently. If SON Transfer


Relationship needs to be enabled, RIMSupport must also be enabled at the same
time. If not, SON Transfer is invalid.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.1.148 Circuit data handover control


Full Name Circuit data handover control

2-157

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation CSDATAHOControl

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a handover is enabled during circuit


Description data service.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason The handover is enabled generally.

If the handover results in damage to CS data service, the function


Configuration Rule and
should be disabled. The handover never occurs when CS data service
Adjustment Suggestion
is performed.

Change Mode Offline

Related features N/A

Related Parameters GHandoverControl.CSDATAHOControl

The handover is performed when both the associated parameters are


Relationship
set to Yes.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.1.149 Cell Bar when A break


Full Name Cell Bar when A break

Abbreviation CellSeleBarADown

Managed Object GSM Logical Configuration

2-158

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the affected cell notifies the related
MS of cell selection unavailable when the A interface is broken. The MS
after receiving the notification will select the other networks of the opera-
Description tor, for example, a 3G/4G network.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The function is disabled if enabling the function is not required on site.

Configuration Rule and


Adjustment Suggestion The function is enabled in accordance with an onsite requirement.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.1.150 VAMOS II prior to pair with non saic UE


Full Name VAMOS II prior to pair with non saic UE

Abbreviation VamosIIPairPriority

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-159

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter represents the pairing priority for VAMOS II mobile


phones.
If this parameter is set to 1, the system first pairs traditional mobile
phones. If there are no appropriate paring objects, the system will select
SAIC mobile phones (including MUTE SAIC and DARP2), VAMOSI
mobile phones, VAMOSII mobile phones, or SAIC AFC mobile phones.
If this parameter is set to 0, the system does not pair traditional mobile
phones first. Instead, the system will select SAIC mobile phones
(including MUTE SAIC and DARP2), VAMOSI mobile phones, VAMOSII
mobile phones, or SAIC AFC mobile phones. If there are no appropriate
Description paring objects, the system will pair traditional mobile phones.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

The antijamming capability of traditional mobile phones is the poorest.


Default Value
Therefore, the priority of paring traditional mobile phones is set to the
Configuration Reason
lowest.

Configuration Rule and The parameter is modified only when the customer has special
Adjustment Suggestion requirements. Normally, the default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.1.151 Send Paging CS on CCCH or not when PS instance exists


Full Name Send Paging CS on CCCH or not when PS instance exists

2-160

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation SendPacchCcch

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

A CS paging is received in the PS service, if the paging coordination


function is enabled, the system will send a Paging CS message on the
PACCH channel. This parameter specifies whether to send the Paging
CS message also on the CCCH channel. If the paging coordination
function is disabled, this parameter specifies whether to send the Paging
CS message on the CCCH channel when a CS paging is received in
the PS service.
0: Do not send the Paging CS message on the CCCH channel.
Description 1: Send the Paging CS message on the CCCH channel.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the function switch is disabled.

If the function switch is enabled, it helps improve CS paging success


Configuration Rule and rate, but it may increase the number of messages at the radio interface.
Adjustment Suggestion In practical applications, whether the function switch is enabled depends
on the network operating requirement and network capability.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2-161

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.1.152 If support mute call detect


Full Name If support mute call detect

Abbreviation MuteCallDetSupport

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter enables or disables unidirectional call detection. If this


function is enabled, the user plane will detect unidirectional calls and re-
Description port necessary information to the back-end to facilitate fault location.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Normally, the function switch is disabled. It is enabled when the user
Configuration Reason plane needs to detect problems.

This function can be enabled in application scenarios with a lot of


Configuration Rule and
unidirectional calls. Maintenance personnel can locate the problem
Adjustment Suggestion
through relevant messages.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2-162

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.1.153 P value of MUTE SAIC MS capability detection


Full Name P value of MUTE SAIC MS capability detection

Abbreviation MuteSaicDetNumP

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Capability detection times P of MUTE SAIC MSs

Instance BSC

Value Range and Step 10..65535

Unit N/A

Default Value 800

Default Value To ensure accurate and fast detection, it is recommended to set this
Configuration Reason parameter to 80.

If the value is set too small, the determination conditions are easy to be
Configuration Rule and met, which causes inaccurate evaluation of MS capabilities. If the value is
Adjustment Suggestion set too large, the determination conditions are difficult to be met, which
causes hard recognition of MUTE SAIC MSs.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.154 N value of SAIC AFC MS capability detection


Full Name N value of SAIC AFC MS capability detection

Abbreviation SaicAfcDetNumN

2-163

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Capability detection times N of SAIC AFC MSs

Instance BSC

Value Range and Step 10..65535

Unit N/A

Default Value 1000

Default Value To ensure accurate and fast detection, it is recommended to set this
Configuration Reason parameter to 100.

If the value is set too small, there are few samples for determination,
Configuration Rule and which causes inaccurate determination result. If the value is set too large,
Adjustment Suggestion determination takes a long time, which affects the system performance
due to scrambling.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.155 N value of MUTE SAIC MS capability detection


Full Name N value of MUTE SAIC MS capability detection

Abbreviation MuteSaicDetNumN

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-164

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Description Capability detection times N of MUTE SAIC MSs

Instance BSC

Value Range and Step 10..65535

Unit N/A

Default Value 1000

Default Value To ensure accurate and fast detection, it is recommended to set this
Configuration Reason parameter to 100.

If the value is set too small, there are few samples for determination,
Configuration Rule and which causes inaccurate determination result. If the value is set too large,
Adjustment Suggestion determination takes a long time, which affects the system performance
due to scrambling.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.156 Whether using Frequency List describe channel frequency


hopping of assignment command
whether using Frequency List describe channel frequency hopping of as-
Full Name signment command

Abbreviation AssUseFreqList

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

2-165

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When constructing an assignment command, the system fills in "MobileAllo-


cationAT" or "FreqListAT" according the status of the AssUseFreqList switch
if the channel type is frequency hopping system. If the value of AssUseFre-
qList is 1, the system fills in "FreqListAT". Otherwise, the system fills in
Description "MobileAllocationAT".

Instance BSC

Value Range and Step 0:using mobile allocation, after time 1:using frequence list, after time

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the frequency list is not used.

Configuration Rule and Decides whether the assignment command uses the frequency list to
Adjustment Suggestion determine the parameter setting.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.1.157 P value of SAIC AFC MS capability detection


Full Name P value of SAIC AFC MS capability detection

Abbreviation SaicAfcDetNumP

Managed Object GSM Logical Configuration

3GPP Name N/A

3GPP Reference N/A

Description Capability detection times P of SAIC AFC MSs

Instance BSC

2-166

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 10..65535

Unit N/A

Default Value 800

Default Value To ensure accurate and fast detection, it is recommended to set this
Configuration Reason parameter to 80.

If the value is set too small, the determination conditions are easy to be
Configuration Rule and met, which causes inaccurate evaluation of MS capabilities. If the value is
Adjustment Suggestion set too large, the determination conditions are difficult to be met, which
causes hard recognition of SAIC AFC MSs.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

OMC Access Path GUI: Managed Element->GSM Logical Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2 BSS Function Timer(GBssFunctionTimer)


2.2.1 BSS Function Timer ID
Full Name BSS Function Timer ID

Abbreviation GBssFunctionTimer

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

Description BSS Function Timer ID

Instance None

Value Range and Step N/A

2-167

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.2 Protective time waiting for access


Full Name Protective time waiting for access

Abbreviation rmsT1

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is rmsT1 timer. It indicates protection waiting time for MS


access during assignment or handover, after channel activation process.
Timer start: The destination channel receives the CHL ACITIVATION
ACK message and sends the RADIO AVAILABLE message to the
source channel.
Timer stop: In MS access, the destination channel receives the
ASSIGNMENT COM or HANDOVER COM message.
Timeout action: the instance on target channel is released.
Description This parameter is changed in V6.20.614b.

2-168

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 0..300

Unit 100ms

Default Value 70

Default Value Generally, the MS can be accessed in seven


Configuration Reason seconds.

The default value is recommended. A too large


Configuration Rule and parameter value will cause long-time occupation of radio resources,
Adjustment Suggestion which results in the waste of resources. A too small parameter value
may increase the access failure rate.

Change Mode Offline

Related features N/A

Related Parameters T3107


T3103

For intra-cell handovers, RmsT1 (7s) > RmsT3107 (6s)


Relationship
For inter-cell handovers, RmsT1 (7s) > RmsT3103 (6s)

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.3 Protection time for link establishment response


Full Name Protection time for link establishment response

Abbreviation rmsT3

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

2-169

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is T3 timer.


Timer start: RANCS instance sends "ESTABLISH IND" to RANA
instance.
Timer stop: RANCS instance receives the "CONNECT CONF" sent by
RANA instance, or the "CONNECT FAIL" when RANA fails to establish
the link.
Description Timeout action: Release this service.

Instance BSC

Value Range and Step 30..100

Unit 100ms

Default Value 60

Default Value
Configuration Reason Generally, six seconds are enough for protection.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.4 SAPI3 link establishment time


Full Name SAPI3 link establishment time

Abbreviation rmsT6

Managed Object BSS Function Timer

3GPP Name N/A

2-170

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

Timer T6 supervises link establishment of SAPI3.


Timer start: timer T6 starts when BSC receives the DTAP (SAPI = 3)
message from MSC and there is no SAPI3 link.
Timer stop: timer T6 stops when BSC receives the ESTABLISH
CONFIRM message from BTS.
Overtime action: When timer T6 expires, the BSSMAP SAPI"n" REJECT
Description message will be sent to MSC.

Instance BSC

Value Range and Step 10..300

Unit 100ms

Default Value 100

Default Value Generally, the ESTABLISH CONFIRM message can


Configuration Reason be received from the BTS in 10 seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.5 Protective time that responses external handover completion


message
Full Name Protective time that responses external handover completion message

Abbreviation rmsT7

2-171

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object BSS Function Timer

3GPP Name T7

3GPP Reference 3GPP TS 48.008

This parameter is timer rmsT7, used to calculate the protective time that
PO responds external handover completion message.
Timer start: it starts when RANCS sends the HANDOVER REQUIRED
message to MSC.
Timer stop: it stops when RANCS instance receives HANDOVER
COMMAND response from MSC.
Timeout action: clear the reason of channel request, record the number
of outgoing attempts and request failures, do penalty for target cell, and
Description wait for handover decision to initiate handover.

Instance BSC

Value Range and Step 50..200

Unit 100ms

Default Value 150

Default Value Generally, an external handover can be completed


Configuration Reason in 15 seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-172

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.6 External handover protective time


Full Name External handover protective time

Abbreviation rmsT8

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is timer rmsT8, monitoring external handover process.


Timer start: rmsT8 starts after handover command is sent in Serve state
while RANCS instance should be handed over to an external cell.
Timer stop: rmsT8 timer stops if RANCS instance receives HO
COMCLEAR CMD (handover success) or UM HO FAIL (handover failed).
Timeout action: Release the service.
Description This parameter is changed in V6.20.614b.

Instance BSC

Value Range and Step 1..1000

Unit 100ms

Default Value 100

Default Value Generally, an external handover can be completed


Configuration Reason in 10 seconds.

The default value is recommended. If the external


Configuration Rule and
handover success rate is low, increase the parameter value. However,
Adjustment Suggestion
a too large parameter value will impact the user experience.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-173

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.7 Protective time for RF channel release


Full Name Protective time for RF channel release

Abbreviation rmsT9

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is T9 timer.


Timer start: T9 starts when RF CHANNEL RELEASE is sent to BTS
when RANCS instance is released.
Timer stop: T9 stops when RANCS instance receives RF CHANNEL
RELEASE ACKNOWLEDGE response from BTS.
Description Timeout action: service instance is released.

Instance BSC

Value Range and Step 10..50

Unit 100ms

Default Value 20

Default Value
Configuration Reason BSC can receive the BTS acknowledge in 2 secs normally

The larger the parameter value is, the longer


Configuration Rule and the waiting time is, and the longer the time needed for service release
Adjustment Suggestion due to the occurrence of exception. This parameter is invalid now.
The RMST11 is set by the setting of Emlpp.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-174

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.8 Starting time for oriented retry


Full Name Starting time for oriented retry

Abbreviation rmsT10

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is a timer used to wait for the start of directed retry. The
timer is started to wait for queuing, forced handover, and forced release
actions when the cell fails to assign an available channel. When the
timer expires, a directed retry process is initiated.
Start: The cell fails to assign an available channel.
Stop: An available channel resource is obtained after queuing, forced
handover, and forced release.
Description At expiry: Initiate a directed retry.

Instance BSC

Value Range and Step 50..150

Unit 100ms

Default Value 60

Default Value
Configuration Reason Due to the practical application of the net

Configuration Rule and Set the parameter value in consideration of


Adjustment Suggestion the time needed for queuing preemption.

Change Mode Offline

Related features ZGB-03-01-002 Directed_Retry

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-175

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.9 Encryption mode modification time


Full Name Encryption mode modification time

Abbreviation rmsT5

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is timer T5, used to supervise modification process of


encryption mode, that is, the timer that waits for MS response after
configuring radio encryption mode.
Timer Start: T5 timer starts when BSC receives CIPHER MODE
COMMAND message from MSC.
Timer Stop: T5 timer suspends when BSC receives CIPHER MODE
COMPLETE message from MS.
Overtime Action: If this timer is overtime, BSC will send BSSAP CIPHER
Description MODE REJECT message to MSC.

Instance BSC

Value Range and Step 30..120

Unit 100ms

Default Value 100

Default Value Generally, the CIPHER MODE COMPLETE message


Configuration Reason can be received from the MS in 10 seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-176

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.10 Mode modification process time


Full Name Mode modification process time

Abbreviation TModeModify

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is T13 timer. It supervises BTS and MS modes


modification process. Mode modification refers to modify channel mode.
When there is not SDCCH and FACCH is allocated, new channel is not
allocated after assignment, but modify the modes.
Timer start: When BSC sends the MODE MODIFY message to BTS
and sends the CHANNEL MODE MODIFY message to MS.
Timer stop: When BSC receives the MODE MODIFY ACK/NACK
message from BTS and the CHANNEL MODE MODIFY message from
MS.
Timeout action: If the timer is overtime, the BSC will send BSSAP
Description ASSIGNMENT FAILURE message to MSC.

Instance BSC

Value Range and Step 35..100

Unit 100ms

Default Value 60

Default Value
Configuration Reason empirical value

Increase the parameter value appropriately


Configuration Rule and
if the mode modification failure frequently occurs, that is, the number
Adjustment Suggestion
of times that the timer expires is large.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

2-177

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.11 Continue timer for mode modify


Full Name Continue timer for mode modify

Abbreviation TModeModifyConn

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

Connection delay timer. This timer is used to wait for connection finished
after sending connection request, including Abis connection and TC
connection.
Timer start: send connection request.
Timer stop: wait for all connection completion message.
Description Timeout action: clear this service instance.

Instance BSC

Value Range and Step 20..70

Unit 100ms

Default Value 30

Default Value The default value is set to 50 because five


Configuration Reason seconds are enough to complete all connections.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

2-178

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.12 First overload period of flow traffic control


Full Name First overload period of flow traffic control

Abbreviation MT11

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is the mT11 timer used for traffic control when the cell
is overloaded. The mT11 timer coordinates with mT12 to modify the
ACCESS CONTROL parameter for the cell configuration, and notifies
the MS via system messages.
During the lifetime of the timer mT11, the BSC does not process the
RACH Load Indication message from the BTS, and the value of this
timer must be less than that of timer mT12.
Timer start: When the RACH Load Indication message from the BTS
is received.
Timer stop: None
Timeout action: The BSC resumes processing the RACH Load Indication
message.
Description Associated timer: mT12

Instance BSC

Value Range and Step 30..150

Unit 100ms

Default Value 80

The fluctuation of overload indication is unlikely


Default Value
to cause the flow control fluctuation if new overload indication is
Configuration Reason
not processed within eight seconds.

The larger the parameter value is, the more


Configuration Rule and stable the flow control is due to lower sensitivity to load indication.
Adjustment Suggestion The smaller the parameter value is, the more likely the flow control
fluctuates due to higher sensitivity to load indication.

Change Mode Offline

Related features ZGB-03-04-001 BSC Load Control

2-179

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters mT12

Relationship mT11<mT12

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.13 Second overload period of flow traffic control


Full Name Second overload period of flow traffic control

Abbreviation MT12

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is the mT12 timer used for traffic control when the cell
is overloaded. The mT12 timer coordinates with mT11 to modify the
ACCESS CONTROL parameter for the cell configuration, and notifies
the MS via system messages.
The value of this timer must be greater than that of timer mT11. The
traffic control procedure is described as follows:
When the network receives the OVERLOAD message for the first time,
the system reduces one traffic control level and starts mT11 and mT12.
During mT11, the OVERLOAD message is neglected. If the network still
receives the OVERLOAD message between mT11 and mT12, it reduces
one traffic control level again, and restarts the two timers. If the network
does not receive the OVERLOAD message after mT12, it increases a
traffic control level, and restarts mT12.
The different traffic control levels have different ratios of traffic being
rejected.
Timer start: When the RACH Load Indication message from the BTS
is received.
Timer stop: When the RACH Load Indication message is received again
Description
from the BTS after mT11 times out.

2-180

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Timeout action: The system reduces a traffic control level.


Associated timer: mT11

Instance BSC

Value Range and Step 50..200

Unit 100ms

Default Value 150

mT11 is used to prevent the fluctuation of


load indication. mT12 is used to adjust traffic level after a new
Default Value
load indication is received. If no load indication is received after
Configuration Reason
the expiry of mT12, the system lowers the flow control level. 150The
default value is set to 150, which is almost twice the value of

The larger the parameter value is, the greater


Configuration Rule and
the flow control fluctuation is. Similarly, a smaller parameter value
Adjustment Suggestion
corresponds to less fluctuation.

Change Mode Offline

Related features ZGB-03-04-001BSC Load Control

Related Parameters mT11

Relationship mT11<mT12

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.14 Immediate assignment period


Full Name Immediate assignment period

Abbreviation T3101

Managed Object BSS Function Timer

3GPP Name T3101

3GPP Reference 3GPP TS 44.018

2-181

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This timer indicates the time period for the instant assigning process.
Timer start: The timer starts when BSC sends an IMMEDIATE
ASSIGNMENT COMMAND message.
Timer stop: The timer stops when BSC receives the ESTABLISH
INDICATION message.
Timeout action: The BSC sends an RF CHANNEL RELEASE message
Description to the BTS.

Instance BSC

Value Range and Step 10..100

Unit 100ms

Default Value 30

The default value is set in consideration of


Default Value
the time needed for sending an immediate assignment message to the
Configuration Reason
MS and the time needed for the MS to access the network.

A too large parameter value may result in the


Configuration Rule and
waste of channel resources and traffic congestion. A too small parameter
Adjustment Suggestion
value may decrease the immediate assignment success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.15 Handover period of source cell


Full Name Handover period of source cell

Abbreviation T3103

Managed Object BSS Function Timer

2-182

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name T3103

3GPP Reference 3GPP TS 44.018

This timer indicates the time period for intra-BSC handover procedure.
Timer start: The timer starts when BSC sends HANDOVER COMMAND
message to MS.
Timer stop: The timer suspends when BSC receives HANDOVER
COMPLETE message on a new channel or HANDOVER FAILURE
message on an old channel from MS.
Timeout action: If the timer is timeout, the BSC sends a CLEAR
REQUEST message to MSC, with the cause CAUSE_RI_FAIL (radio
Description interface failure) and the new channel is released.

Instance BSC

Value Range and Step 0..1000

Unit 100ms

Default Value 60

The default value is set in consideration of


Default Value
the time needed for sending the handover command to the MS and the
Configuration Reason
time needed for the MS to complete the inter-cell handover.

A too large parameter value may result in the


Configuration Rule and
waste of channel resources and traffic congestion. A too small parameter
Adjustment Suggestion
value may decrease the handover success rate.

Change Mode Offline

Related features N/A

Related Parameters rmst1

Relationship T3103<rmst1

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-183

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.16 Assignment period


Full Name Assignment period

Abbreviation T3107

Managed Object BSS Function Timer

3GPP Name T3107

3GPP Reference 3GPP TS 44.018

This timer indicates the time period for assignment procedure and
internal handover of a cell.
Timer start: The timer starts when BSC sends RIL3_RR ASSIGNMENT
COMMAND message to MS.
Timer stop: The timer stops when BSC receives RIL3_RR ASSIGNMENT
COMPLETE message or RIL3_RR ASSIGNMENT FAILURE message.
Timeout action: For the assignment procedure, the old and new
channels are released, related MS connections are cleared, and a
BSSAP ASSIGNMENT FAILURE message is sent to the MSC; for the
intra-cell handover, the BSC sends a CLEAR REQUEST message to the
Description MSC, with the cause CAUSE_RI_FAIL (radio interface failure).

Instance BSC

Value Range and Step 0..1000

Unit 100ms

Default Value 60

The default value is set in consideration of


Default Value
the time needed for sending the assignment command to the MS and the
Configuration Reason
time needed for the MS to complete the assignment.

A too large parameter value may result in the


Configuration Rule and
waste of channel resources and traffic congestion. A too small parameter
Adjustment Suggestion
value may decrease the assignment success rate.

Change Mode Offline

Related features N/A

Related Parameters rmst1

Relationship T3107<rmst1

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

2-184

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.17 TCH Channel release period


Full Name TCH Channel release period

Abbreviation T3109

Managed Object BSS Function Timer

3GPP Name T3109

3GPP Reference 3GPP TS 44.018

This timer supervises the channel release process.


Timer start: The timer starts when BSC sends RIL3_RR CHANNEL
RELEASE message to MS.
Timer stop: The timer stops when BSC receives RELEASE INDICATION
message from BTS (when BTS receives DISC frame from MS).
Timeout action: If this timer is timeout, BSC will send CHANNEL
Description RELEASE message to MS.

Instance BSC

Value Range and Step 0..1000

Unit 100ms

Default Value 50

The default value is set in consideration of


the time needed for the MS to complete the channel release after
Default Value
receiving
Configuration Reason
a channel release command, and the time needed for the call drop of
the MS caused by the failure of receiving a channel release command.

To avoid crosstalk caused by network-side channel


release before the completion of channel release at the MS side, the
Configuration Rule and
value of T3109 must be larger than that of the radio link expiration
Adjustment Suggestion
timer at the MS side. However, a too large parameter value may result
in the waste of channel resources and traffic congestion.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-185

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.18 TCH Channel deactivation delay


Full Name TCH Channel deactivation delay

Abbreviation T3111

Managed Object BSS Function Timer

3GPP Name T3111

3GPP Reference 3GPP TS 44.018

After releasing the UM interface radio link layer, in order to make sure
the radio link is disconnected, BSC sets a period of protection time
rmsT3111. Releases the wireless channel and deactivates it after
rmsT3111 timer stops.
Timer start: rmsT3111 timer starts when BSC receives RELEASE
INDICATION message.
Timeout action: If rmsT3111 timer is timeout, the BSC will send RF
Description CHANNEL RELEASE message to BTS.

Instance BSC

Value Range and Step 1..300

Unit 100ms

Default Value 11

Default Value The default value is set in consideration of


Configuration Reason the time needed for the BTS to send the UA message.

A too large parameter value may result in the


waste of channel resources and traffic congestion. If the parameter
Configuration Rule and
value is too small, the BTS cannot send the UA message to the MS in
Adjustment Suggestion
time, and thus the MS may fail to complete the channel release in
a short time.

Change Mode Offline

2-186

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.19 RLSD message receive protection timer


Full Name RLSD message receive protection timer

Abbreviation T9101

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is timer T9101, supervising the reception of RLSD.


Timer start condition: T9101 starts when BSC sends the BSSAP
CLEAR COMPLETE message to MSC.
Timer stop condition: T9101 stops when the RLSD message from MSC
is received.
Overtime Action: If this timer is overtime, BSC will send RLSD message
Description to release SCCP connection.

Instance BSC

Value Range and Step 20..50

Unit 100ms

Default Value 20

Default Value Generally, the BSC can receive a message from


Configuration Reason the MSC in two seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

2-187

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.20 Channel activation protection timer


Full Name Channel activation protection timer

Abbreviation T9103

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is timer T9103, monitoring channel activation process.


Timer Start: T9103 timer starts when BSC sends CHANNEL
ACTIVATION message to BTS.
Timer Stop: T9103 timer suspends when BSC receives CHANNEL
ACTIVATION ACK or CHANNEL ACTIVATION NACK message.
Overtime Action: If this timer is overtime, BSC will send RF CHANNEL
Description RELEASE message to BTS

Instance BSC

Value Range and Step 20..50

Unit 100ms

Default Value 30

Default Value Generally, the CHANNEL ACTIVATION ACK message


Configuration Reason can be received from the BTS in two seconds.

2-188

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion Only the default value can be used.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.21 MSC clear command protection timer


Full Name MSC clear command protection timer

Abbreviation T9104

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is T9104 timer. It supervises CLEAR COMMAND from


MSC.
Timer Start: T9104 timer starts when BSC sends a CLEAR REQUEST
message to MSC.
Timer Stop: T9104 timer suspends when BSC receives CLEAR
COMMAND message from MSC.
Timeout Action: If this timer is overtime, CLEAR REQUEST message
Description will be resent (four times at the most).

Instance BSC

Value Range and Step 20..50

Unit 100ms

Default Value 30

2-189

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Generally, the CLEAR COMMAND message can be


Configuration Reason received from the MSC in three seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.22 SCCP connection protection timer


Full Name SCCP connection protection timer

Abbreviation T9105

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is T9105 timer, monitoring SCCP connection process.


Timer Start: T9105 timer starts when BSC sends BSSAP
SCCP_CONNECTION_REQ message to MSC.
Timer Stop: T9105 suspends when BSC receives SCCP_CONNEC-
TION_CONFIRM/SCCP_CONNECTION_REFUSED message.
Overtime Action: If this timer is overtime, BSC will send CHANNEL
Description RELEASE message to MS.

Instance BSC

Value Range and Step 20..60

Unit 100ms

2-190

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 30

Generally, the SCCP CONNECTION CONFIRM or SCCP


Default Value
CONNECTION REFUSED message can be received from the MSC in
Configuration Reason
three seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.23 Time of micro-micro handover delay


Full Name Time of micro-micro handover delay

Abbreviation Tmicro

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

In micro-micro handover control, a delay time value is required (the timer


value). Timer Start: relevant timer starts instantly when a call enters a
micro cell. Timer Stop: relevant timer stops when it reaches the set value.
Existing call can use neighboring micro cell in the same layer only when
the timer stops. In this way, it could prevent fast moving mobiles staying
Description in the micro cell layer.

Instance BSC

Value Range and Step 1..200

2-191

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit 100ms

Default Value 1

The purpose of this timer is to reduce the


handover times of the fast-travelling MS in a lower-layer network.
Default Value
Generally, it is sure that the MS still camping on the cell after
Configuration Reason
eight seconds is not travelling fast. To prevent the handover of the
MS on the same layer, the default value is set to 80.

Set the parameter value according to the geographic


Configuration Rule and location and distribution of cells and the mobility of MSs in the
Adjustment Suggestion area. The larger the parameter value is, the longer the limitation
on handover is.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail Update

2.2.24 TFI and USF release timer


Full Name TFI and USF release timer

Abbreviation T3169

Managed Object BSS Function Timer

3GPP Name T3169

3GPP Reference 3GPP TS 44.060

2-192

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is timer T3169. During the packet uplink transmission, if


N3101 or N3103 counter stops, BSS starts the T3169 timer. Network
utilizes TFI and USF resources on release when T3169 stops.
Timer Start: T3169 timer starts when the counter N3101 = N3101_MAX
or the counter N3103 = N3103_MAX.
Timer stop condition: None.
Timeout action: Release USF and TFI resources.
N3101=N3101_MAX or N3103=N3103_MAX indicates that MS does not
Description respond BSC, collects TFI and USF resource for BSC reuse.

Instance BSC

Value Range and Step 0..65535

Unit 10ms

Default Value 500

Default Value
Configuration Reason Protocol Recommended Value

TFI and USF resources are released for reuse


on the network side when timer T3169 expires. The TBF is forcibly
released when the value of N3101 reaches N3101_MAX or the value of
Configuration Rule and
N3103 reaches N3103_MAX. It is unnecessary to set a large parameter
Adjustment Suggestion
value, which results in a long waiting time and even influences the
utilization of TFI and USF resources. Set the parameter value according
to the recommendation in the protocol.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-193

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.25 TBF release timer


Full Name TBF release timer

Abbreviation T3191

Managed Object BSS Function Timer

3GPP Name T3191

3GPP Reference 3GPP TS44.060

This parameter is timer T3169. The conditions of timer start, stop, and
timeout actions are as follows.
Timer start/restart: During the packet downlink transmission, if RLC
data block is the final downlink data block to be transmitted, BSC sends
the RLC data block with the Final Block Identifier (FBI) domain as 1. It
contains an effective RRBP domain to initialize the release of downlink
TBF. At this time, the network starts or restarts T3191.
Timer stop: If RLC mode is ACK mode and MS finds that all
downlink blocks have been collected, MS sends the Packet Downlink
Acknowledgement
message (with FAI domain = 1) through the uplink block specified in
RRBP domain. If BSC receives the Packet Downlink Acknowledgement
message
before T3191 is timeout, T3191 stops.
If RLC mode is NACK mode, MS sends the Packet Control
Acknowledgement message in the uplink block specified by RRBP field.
If BSC receives
the Packet Control Acknowledgement message before T3191 expires,
T3191 stops.
Description Timeout action: BSC releases this TBF.

Instance BSC

Value Range and Step 0..65535

Unit 10ms

Default Value 500

Default Value
Configuration Reason Protocol Recommended Value

2-194

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When BSC transmits the last RLC data block of DL TBF, set FBI to 1,
and set RRBP to require the MS for responding with the Packet Downlink
Ack/Nack message and starting T3191. If the required block has
received the MS' response, stop T3191 to end downlink transmission. If
the T3191 overflows, wireless transmission fails and DL TBF is released
improperly.
Configuration Rule and Setting this parameter value to a larger value helps improve the improer
Adjustment Suggestion failure index of DL TBF, and ensure that links are reestablished after the
TBF is better to be released as soon as possible. In this case, channel
resources and TFI resources are not wasted, as well as users' feeling is
not influenced.
The recommeded value is defined in "Table 13.2.1: Specification of
timers used in GPRS on the Network side" in 3GPP TS 04.60, so it is
better not to modify the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.26 TBF protect time when radio link failure


Full Name TBF protect time when radio link failure

Abbreviation T3195

Managed Object BSS Function Timer

3GPP Name T3195

3GPP Reference 3GPP TS44.060

2-195

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter the protection time of downlink TBF when the radio link
fails or when the cell change leads to MS failure to respond.
Timer starts: T3195 starts if counter N3105=N3105_MAX.
Timer stop: none.
Description Timeout action: BSC can use this TFI.

Instance BSC

Value Range and Step 0..65535

Unit 10ms

Default Value 500

Default Value
Configuration Reason Protocol Recommended Value

TFI is released for reuse on the network side when timer T3195
expires. The TBF is forcibly released when the value of N3105 reaches
N3105_MAX. It is unnecessary to set a large parameter value, which
Configuration Rule and
results in a long waiting time and even influences the utilization of TFI
Adjustment Suggestion
resource.
Use the recommended value specified in Table 13.2.1: Specification of
timers used in GPRS on the Network side of 3GPP TS 04.60.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.27 Bvc block/unblock retry time


Full Name Bvc block/unblock retry time

Abbreviation BssgpT1

2-196

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object BSS Function Timer

3GPP Name T1

3GPP Reference 3GPP TS48.018

This parameter monitors BSSGP blocking/unblocking process.


Global process in BSC central module MP uses the timer value. BSS
initiates BVC blocking/unblocking procedure for a point-to-point BVC in
case of OAM intervention or device faults. BSC repeats this procedure if
SGSN does not return BVC BLOCK/UNBLOCK ACK/NACK messages.
At this time, the number of sending increases by 1. The interval between
the messages is the BVC blocking/unblocking retry time. T1 is timeout
but does not exceed the max number of sending, try to re-send it.
T1 exceeds the max number of sending. Ignore it.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates BVC block/unblock process.
Timer stop: The BVC BLOCK/UNBLOCK ACK/NACK message is
received from SGSN.
Description Timeout action: BSC repeats the process for N times (configurable).

Instance BSC

Value Range and Step 10..300

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

2-197

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.28 Bvc reset retry time


Full Name Bvc reset retry time

Abbreviation BssgpT2

Managed Object BSS Function Timer

3GPP Name T2

3GPP Reference 3GPP TS48.018

This parameter monitors BSSGP reset procedure.


BSS initiates "BVC reset" process when BVC (including PTP BVC and
signaling BVC) is required to be reset (disconnection to connection at
Gb interface, and cell is changed from GPRS support to GPRS/EDGE
support) due to certain reason. BSC repeats the procedure if SGSN
does not return BVC RESET ACK/NACK message. At this time, the
number of sending increases by 1. The interval between the messages
is the BVC reset retry time. T2 is timeout but does not exceed the max
number of sending, try to re-send it. T2 is timeout and exceeds the max
number of sending. Change the proper BVC database status to BLOCK.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates BVC reset process.
Timer stop: BVC reset acknowledgement/unacknowledgement message
is returned by SGSN.
Timeout action: BSC repeats the process for N times (configurable).
Description This parameter is changed in V6.20.614a.

Instance BSC

Value Range and Step 10..1200

Unit 100ms

Default Value 150

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

2-198

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.29 Suspend retry time


Full Name Suspend retry time

Abbreviation BssgpT3

Managed Object BSS Function Timer

3GPP Name T3

3GPP Reference 3GPP TS48.018

Class B MS notifies the network to suspend packet service when MS is


ready to perform a voice service.
BSS initiates to suspend SGSN procedure after receiving SUSPEND
message from MS BSC repeats the process if SGSN does not respond
suspend ACK/NACK message. At this time, the number of sending
times increases by 1.
The interval between the messages is the suspend retry time. T3 is
timeout but does not exceed the max number of sending, try to re-send
it. T3 is timeout but does not exceed the max number of sending, stop
the suspend process.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates the suspend SGSN process.
Timer stop: BSC receives the suspend ACK/NACK message from
SGSN.
Description Timeout action: BSC repeats the process for N times (configurable).

Instance BSC

Value Range and Step 1..100

2-199

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters ResumeSetOpt

This parameter is only valid when the switch of SUSPEND/RESUME


Relationship
process is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.30 Resume retry time


Full Name Resume retry time

Abbreviation BssgpT4

Managed Object BSS Function Timer

3GPP Name T4

3GPP Reference 3GPP TS48.018

2-200

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter monitors BSSGP resuming procedure. Service process


in BSC peripheral module MP uses the timer value. BSS initiates
resuming procedure to SGSN when GPRS-attached MS is not in
dedicated mode and BSS uses Notify SGSN to resume GPRS service
policy. BSC repeats the process if SGSN does not respond resume
ACK/NACK message. At this time, the number of sending times
increases by 1. The interval between the messages is the resume retry
time.
T4 is timeout but does not exceed the max number of sending, try to
re-send it. If T4 is timeout and exceeds the max number of sending,
stop the resume process and inform MS to initiate RA update process.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates the resume process.
Timer stop: BSC receives the resume ACK/NACK message from SGSN.
Description Timeout action: BSC repeats the process for N times (configurable)

Instance BSC

Value Range and Step 1..100

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters ResumeSetOpt

This parameter is only valid when the switch of SUSPEND/RESUME


Relationship
process is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

2-201

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.2.31 Access capability update retry time


Full Name Access capability update retry time

Abbreviation BssgpT5

Managed Object BSS Function Timer

3GPP Name T5

3GPP Reference 3GPP TS48.018

This parameter monitors BSSGP RA_CAPABILITY procedure.


Service process in BSC peripheral module MP uses the timer value.
BSC repeats Radio Access Capability Update procedure after BSS
initiates RA_CAPABILITY procedure to SGSN and if SGSN does not
return the RA_CAPABILITY UPDATE ACK/NACK message. Also,
the number of sending times increases by 1. The interval between the
messages is the retry time for radio access capability update. T5 is
timeout but does not exceed the max number of sending, try to re-send it.
If T5 is timeout and exceeds the max number of sending, update process
of radio access capability stops.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates the radio access capability update process.
Timer stop: BSC receives the radio access capability update ACK/NACK
message from SGSN.
Description Timeout action: BSC repeats the process for N times (configurable)

Instance BSC

Value Range and Step 10..300

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-202

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.32 PFC creating retry time


Full Name PFC creating retry time

Abbreviation BssgpT6

Managed Object BSS Function Timer

3GPP Name T6

3GPP Reference 3GPP TS48.018

This parameter indicates the PFC creating retry time .


While BSS initiates "Create PFC" process to SGSN, if SGSN does not
respond "Create PFC ACK/NACK" message, you should repeat "Create
PFC" process. The interval between twice is PFC creation retry time.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: it starts while BSC initiates Download PFC process.
Timer stop: it stops while receiving SGSN Create PFC message.
Description Timeout action: retransfer for N times (configurable)

Instance BSC

Value Range and Step 1..100

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

2-203

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters PFCSupport

This parameter is only valid when the switch of PFC process is enabled
Relationship
in the BSC.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.33 PFC modifying retry time


Full Name PFC modifying retry time

Abbreviation BssgpT8

Managed Object BSS Function Timer

3GPP Name T8

3GPP Reference 3GPP TS48.018

When BSS initiates "Modify PFC" process to SGSN, if SGSN does not
respond the "Modify PFC ACK/NACK" message, repeat "Modify PFC"
process. The interval between two Modify PFC procedures is the PFC
creation retry time.
Timer start: BSC initiates Modify BSS PFC process.
Timer stop: The BSC receives the SGSN Modify BSS PFC Ack message.
Description Timeout action: retransmit N times (modifiable)

Instance BSC

Value Range and Step 1..100

Unit 100ms

Default Value 30

Default Value
Configuration Reason Depends on Protocol Recommended Value and Gb RTT

2-204

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters PFCSupport

This parameter is only valid when the switch of PFC process is enabled
Relationship
in the BSC.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.34 Supervision Timer of LCS


Full Name Supervision Timer of LCS

Abbreviation LcsSupervision

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is a timer used for supervising a location process.


Start: When the BSC sends a location request to the SMLC.
Stop: When a location acknowledgement message is received.
Description At expiry: Terminate the location process.

Instance BSC

Value Range and Step 100..1000

Unit 100ms

Default Value 250

2-205

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


Configuration Rule and The larger the parameter value is, the longer the waiting time is
Adjustment Suggestion after a location request is sent. Similarly, a smaller parameter value
indicates a shorter waiting time.

Change Mode Offline

Related features ZGO-01-03-002 LCS with CGI+TA &ZGO-01-03-003 LCS with AGPS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.35 Radio Timer of LCS


Full Name Radio Timer of LCS

Abbreviation LcsRadio

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is a timer used for supervising the sending of radio


information in the location process.
Start: When a location-related message is sent to the MS.
Stop: When an acknowledgement message is received from the MS.
Description Timeout action: Terminate the location process.

Instance BSC

Value Range and Step 10..100

Unit 100ms

2-206

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 50

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


Configuration Rule and The larger the parameter value is, the longer the waiting time is
Adjustment Suggestion after the MS sends a location message. Similarly, a smaller parameter
value indicates a shorter waiting time.

Change Mode Offline

Related features ZGO-01-03-002 LCS with CGI+TA &ZGO-01-03-003 LCS with AGPS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.36 LCS wait intra BSS handover timer


Full Name LCS wait intra BSS handover timer

Abbreviation LcsWaitIntraHo

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the waiting time for the completion of an


intra-BSC handover.
Start: An intra-BSC handover is initiated during service location.
Stop: A handover complete message is received.
Description Timeout action: Terminate the location process.

Instance BSC

Value Range and Step 20..100

2-207

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit 100ms

Default Value 60

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


Configuration Rule and The larger the parameter value, the longer the waiting time is after
Adjustment Suggestion a handover request is sent. Similarly, a smaller parameter value means
a shorter waiting time.

Change Mode Offline

Related features ZGO-01-03-002 LCS with CGI+TA &ZGO-01-03-003 LCS with AGPS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.37 PS channel delay release timer


Full Name PS channel delay release timer

Abbreviation PSRelDelay

Managed Object BSS Function Timer

3GPP Name None

3GPP Reference N/A

2-208

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is the delay release timer while dynamic PDCH channel
is converted into TCH channel. The conditions of timer start, stop, and
timeout actions are as follows:
Timer start: All services (including uplink and downlink) on PDCH are
released.
Timer stop: PDCH is occupied again by service TBF.
Timeout action: release PDTCH channel and convert it to TCH channel.
Description This parameter is changed in V6.20.614b.

Instance BSC

Value Range and Step 50..600

Unit 100ms

Default Value 300

The value 300 is sufficient to guarantee that dynamic PS channels can


Default Value
be converted into dynamic channels if no service is available within 30
Configuration Reason
seconds.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.38 Ater wait SCCP connection timer


Full Name Ater wait SCCP connection timer

Abbreviation TAterWaitConn

Managed Object BSS Function Timer

2-209

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter is the SCCP connection wait timer at the Ater interface.
It is used to wait the SCCP CONNECT CONFIRM message of iTC.
Timer start: send connection request message to iTC.
Timer stop: The SCCP connection number that corresponds to this
service is illegal while iTC resource request from service is handled.
Receive link confirm message of iTC.
Timeout action: send Disconnect Request to SCCP and terminate Ater
Description service.

Instance BSC

Value Range and Step 5..20

Unit 100ms

Default Value 15

Default Value 1.5 seconds are enough to establish an SCCP


Configuration Reason connection to the iTC.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces Ater interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.39 Ater wait resource acknowledge timer


Full Name Ater wait resource acknowledge timer

Abbreviation TWaitAterResAck

2-210

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter describes the response to apply for resource from iTC,
to configure this timer wait for iTC during iBSC handover.
Timer start: CS service instance sends TC resource request message.
Timer stop:
Receive the response of iTC resource request.
Receive the response of iTC resource request failure.
Timeout action: clear the proper new RANCS process id related to this
service process. The new CS service instance related to this service
Description process does not exist.

Instance BSC

Value Range and Step 5..25

Unit 100ms

Default Value 15

Default Value 1.5 seconds are enough for the iTC to complete
Configuration Reason the resource assignment and signalling transmission.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces Ater interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-211

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.40 Ater wait resource timer


Full Name Ater wait resource timer

Abbreviation TWaitAterRes

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

It is Ater wait resource timer at Ater, used to wait for the RESOURCE
REQUEST ACKNOWLEDGE message from iTC.
Timer start: Request resource from iTC at Ater.
Timer stop: iTC at Ater returns available resource message to service.
Description Timeout action: Release this service.

Instance BSC

Value Range and Step 10..30

Unit 100ms

Default Value 20

Default Value Two seconds are enough for the iTC to complete
Configuration Reason the resource assignment and signalling transmission.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces Ater interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-212

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.41 Ater wait resource release timer


Full Name Ater wait resource release timer

Abbreviation TAterWaitRel

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

It is Ater wait resource release timer at Ater, used to wait for the
RESOURCE RELEASE ACKNOWLEDGE message from iTC.
Timer start: send iTC resource message to iTC at Ater.
Timer stop: Receive resource release response message from iTC.
Description Timeout action: Release the SCCP link.

Instance BSC

Value Range and Step 20..50

Unit 100ms

Default Value 20

Default Value
Configuration Reason The default value is the same as TWaitAterRes.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces Ater interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-213

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.42 Ater handover monitor timer


Full Name Ater handover monitor timer

Abbreviation TAterMoniterHo

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

Timer start: The service requests circuit resource at Ater on handover.


Timer stop: Receive handover execution message at Ater sent from CS
old service instance. Receive resource release request message at
Ater from CS new service instance.
Timeout action: send release command to CS service from Ater and
Description release iTC resource message to iTC.

Instance BSC

Value Range and Step 70..170

Unit 100ms

Default Value 120

Default Value
Configuration Reason 12 seconds are enough for a handover process.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces Ater interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-214

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.43 HO performed ack timer


Full Name HO performed ack timer

Abbreviation TwaitHoPFMAck

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

When using IP carrier at user plane of interface A, because TC is placed


at MGW, CN shall be informed to replace codec during intra-BSC
handover. CN replacement codec is triggered by HANDOVER
PERFORMED message. To ensure MSC has received this message
and successfully
command MGS to replace codec against obstacles at speech aspect,
HANDOVER PERFORMED ACK message is added. This timer is
used to wait for HANDOVER PERFORMED ACK message from MSC.
Timer start: It starts when BSC sends HANDOVER PERFORMED
message to MSC.
Timer stop: It stops when BSC receives HANDOVER PERFORMED
ACK message from MSC.
Timeout action: BSC releases call while sending CLEAR REQUEST
Description message to MSC.

Instance BSC

Value Range and Step 50..70

Unit 100ms

Default Value 60

Default Value Six seconds are enough for signalling transfer


Configuration Reason and the processing in the MSC.

Configuration Rule and


Adjustment Suggestion Generally, the default value is recommended.

Change Mode Offline

Related features ZGO-05-02-001 Remote Transcoder Support

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-215

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.44 RIR Timer


Full Name RIR Timer

Abbreviation TRIR

Managed Object BSS Function Timer

3GPP Name T(RIR)

3GPP Reference 3GPP TS 48.018

This parameter is an expiration timer waiting for the response from the
opposite end after a RAN INFORMATION REQUEST message is sent by
the control end. The timer is started when the control end sends a RAN IN-
FORMATION REQUEST message. It is stopped when a response mes-
sage is received from the opposite end. If no response is received before
the expiration of the timer, the control end sends a RAN INFORMATION
REQUEST message again, or informs the process failure after sending
Description the message for RIMRetryTimes times.

Instance BSC

Value Range and Step 50..300

Unit 100ms

Default Value 50

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC_FG_20101030

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

2-216

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.45 RI Timer
Full Name RI Timer

Abbreviation TRI

Managed Object BSS Function Timer

3GPP Name T(RI)

3GPP Reference 3GPP TS 48.018

This parameter is an expiration timer waiting for the response from the op-
posite end after the serving BSS sends a RAN INFORMATION message.
This timer is started when the serving BSS sends a RAN INFORMATION
message, in which the indicator requiring response from the opposite is
set. It is stopped when a response is received from the opposite end. If no
response is received before the expiration of the timer, the serving BSS
sends a RAN INFORMATION message again, or informs the process fail-
Description ure after sending the message for RIMRetryTimes times.

Instance BSC

Value Range and Step 50..300

Unit 100ms

Default Value 50

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC_FG_20101030

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

2-217

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.46 RIAE Timer


Full Name RIAE Timer

Abbreviation TRIAE

Managed Object BSS Function Timer

3GPP Name T(RIAE)

3GPP Reference 3GPP TS 48.018

This parameter is an expiration timer waiting for the response from the
opposite end after a RAN INFORMATION APPLICATION ERROR mes-
sage is sent by the control end. The timer is started when the control
end sends a RAN INFORMATION APPLICATION ERROR message. It is
stopped when a response message is received from the opposite end. If
no response is received before the expiration of the timer, the control end
sends the RAN INFORMATION APPLICATION ERROR message again,
or informs the process failure after sending the message for the specified
Description times.

Instance BSC

Value Range and Step 50..300

Unit 100ms

Default Value 50

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC_FG_20101030

Related Parameters N/A

Relationship N/A

2-218

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.47 Time to wait A handover request


Full Name Time to wait A handover request

Abbreviation TWaitAHoReq

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This timer indicates the wait time for a handover request from the A
interface during a 2G/3G relocation procedure.
It is started after the BSC sends a radio resource reservation success
message to the RNC.
It is stopped when the BSC receives of a handover request from the
MSC.
At its expiry, the radio resources are immediately released, and this
instance is released.
Description Related timer: None

Instance BSC

Value Range and Step 4..50

Unit 100ms

Default Value 10

The default value is set to 10 because one


Default Value
second is enough for the RNC to send a handover request to the MSC
Configuration Reason
and for the MSC to forward the handover request to the BSC.

Generally, the default value is recommended.


Configuration Rule and
The waiting time can be appropriately prolonged if the timer expires
Adjustment Suggestion
when waiting for the handover through A interface.

2-219

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.48 Timer to wait a relocation commit MSG from RNC


Full Name Timer to wait a relocation commit MSG from RNC

Abbreviation TWaitRncRelocComm

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This timer indicates the wait time before the BSC receives a Relocation
Commit message from the RNC during a relocation procedure via the
Iur-g interface that is configured between 2G and 3G networks.
It is started after the BSC sends a HandoverRequestAck message to
the MSC.
It is stopped when the BSC receives a Relocation Commit message via
the Iur-g interface from the RNC.
At its expiry, the relocation instance and the corresponding allocated
Description resources are released.

Instance BSC

Value Range and Step 1..200

Unit 100ms

Default Value 100

2-220

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The default value is set in consideration of


Default Value the maximum delay of the HandoverRequestAck message from the
Configuration Reason BSC to
the MSC, and then to the RNC.

Configuration Rule and The default value, already taking the message
Adjustment Suggestion delay on site into consideration, is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.49 Timer of TRAU frame Synchronization


Full Name Timer of TRAU frame Synchronization

Abbreviation TuTrauSyn

Managed Object BSS Function Timer

3GPP Name timer of TRAU frame synchronization

3GPP Reference 3GPP TS 48.0603GPP TS 48.061

This timer is used for TRAU frame synchronization. If call release due
to TRAU frame synchronization lost is enabled, a call is released when
this timer expires.
It is started after an MS accesses the TCH.
It is stopped when the DSP detects that the TRAU frame (voice frame)
is synchronized.
At its expiry, the call is released.
Description Related timer: None

Instance BSC

2-221

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 10..600

Unit 100ms

Default Value 10

Generally, one second (corresponding to the


Default Value
default value 10) is enough for the MS to detect the media data of
Configuration Reason
the TRAU frame after a TCH is allocated to it.

Generally, the default value is recommended.


Increase the value of this parameter appropriately and observe whether
Configuration Rule and
the rate of call drops caused by the detection of TRAU frames is reduced.
Adjustment Suggestion
If yes, set a larger value to the parameter until the call drop rate
caused by TRAU frames does not change greatly.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.50 Guards the PS handover required procedure


Full Name Guards the PS handover required procedure

Abbreviation T12PSHO

Managed Object BSS Function Timer

3GPP Name T12

3GPP Reference 3GPP TS 48.018

It describes the time of Required process which controls PS handover.


After PS Handover Required is sent, the timer starts. The timer stops
after receiving PS Handover Required Ack or Nack. The PS Handover
Description Required is sent again after expire of timer.

2-222

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 50..1200

Unit 100ms

Default Value 300

Default Value
Configuration Reason the experience value of inter-process between two network elements

The default value is recommended for this process


Configuration Rule and
monitoring timer. The parameters relevant to PS handover, including
Adjustment Suggestion
this parameter, are not in commercial use currently.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.51 Guard resource release after sending PS HO command


Full Name Guard resource release after sending PS HO command

Abbreviation TWaitRelInPSHo

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

2-223

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It describes the time of waiting for resource release after PS handover


command is sent.
The timer starts after sending PS Handover Command message. The
timer stops when receiving DELETE BSS PFC from SGSN or handover
finish message from destination cell. The PS Handover Cancel message
Description is sent to SGSN after expire of timer.

Instance BSC

Value Range and Step 100..1000

Unit 100ms

Default Value 300

Default Value
Configuration Reason the experience value of inter-process between two network elements

The default value is recommended for this process


Configuration Rule and
monitoring timer. The parameters relevant to PS handover, including
Adjustment Suggestion
this parameter, are not in commercial use currently.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.52 Time of waiting an internal HO command


Full Name Time of waiting an internal HO command

Abbreviation TWaitInternalHoCmd

Managed Object BSS Function Timer

3GPP Name N/A

2-224

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter defines the interval of the timer for waiting for internal
handover command from MSC after the service process sends the inter-
Description nal handover request.

Instance BSC

Value Range and Step 1..100

Unit 100ms

Default Value 20

Default Value Two seconds are long enough for the A interface
Configuration Reason to transmit signalling and for the MSC to process signalling.

Generally, the default value is recommended.


Configuration Rule and
The waiting time can be appropriately prolonged if the timer expires
Adjustment Suggestion
when waiting for the internal handover command.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.53 Round trip delay


Full Name Round trip delay

Abbreviation RtdDefault

Managed Object BSS Function Timer

3GPP Name Round Trip Delay

3GPP Reference 3GPP TS 48.058

2-225

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The procedure of handover with the AMR speech coding is as follows:


The BSC sends a PRE-HANDOVER NOTIFICATION message to the
BTS, plus the RTD (delay time), so that the BTS can coordinate with TC
to achieve such actions as disabling speech rate modification, exiting
TFO.
Afterwards, the BSC sends the handover command to the MS. The RTD
is the transmission delay between BTS and TC, and can be reported to
BSC by BTS via the ROUND TRIP DELAY REPORT message. Before
receiving RTD, the BSC uses the default value RtdDefault.
Timer start: The BSC sends the PRE-HANDOVER NOTIFICATION to
BTS.
Timer stop: The BSC receives the response for pre-handover
notification message (custom message at the Abis interface) from the
BTS.
Timeout action: BSC sends the handover command to MS.
Description This parameter is currently not used.

Instance BSC

Value Range and Step 1..20

Unit 20ms

Default Value 5

100 ms is enough in consideration of the time


Default Value
needed for message transfer on the user plane between the BTS and
Configuration Reason
the TC.

Generally, the default value is recommended.


Configuration Rule and
If the delay caused by message transfer on the user plane between
Adjustment Suggestion
the BTS and the TC is long, increase the parameter value appropriately.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

2-226

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.2.54 IP Abis Wait Timer


Full Name IP Abis Wait Timer

Abbreviation twaitabis

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is the IP transmission access control timer at the Abis


Description interface.

Instance BSC

Value Range and Step 10..120

Unit 100ms

Default Value 30

Default Value The default value is set in accordance with the experience value at 3G
Configuration Reason side.

Configuration Rule and


Adjustment Suggestion Use default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-227

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.2.55 synchronization timer that ensures source BSS receives


both PS and CS responses
synchronization timer that ensures source BSS receives both PS and CS
Full Name responses

Abbreviation T23

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference 3GPP TS 48.018

This parameter indicates the timer used by the source BSS for
synchronizing CS handover and PS handover acknowledgment
information. The timer start and stop conditions are described as follows:
Timer start: During DTM handover, a HANDOVER REQUIRED message
or PS-HANDOVER-REQUIRED PDU message is sent.
Timer stop: (1) The BSC receives the HANDOVER REQUIRED REJECT
message or BSSMAP HANDOVER COMMAND message from the MSC,
and receives the PS-HANDOVER-REQUIRED-ACK PDU message or
PS-HANDOVER-REQUIRED-NACK PDU message from the SGSN.
(2) The BSC receives the BSSMAP HANDOVER COMMAND message
that contains the (RR) HANDOVER COMMAND L3 information, and the
MSC chooses to continue CS handover.
(3) The BSC receives the BSSMAP HANDOVER COMMAND message
that contains the (RLC/MAC) DTM HANDOVER COMMAND L3
information, and the MSC chooses to send the DTM handover command
to the MS without waiting for the PS handover acknowledgment.
Description Timeout action: Measures for handling DTM handover failures

Instance BSC

Value Range and Step 100..200

Unit 100ms

Default Value 100

Default Value
Configuration Reason Set this parameter based on the general network condition.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-228

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.56 synchronization timer that ensures target BSS receives both


PS and CS requests
synchronization timer that ensures target BSS receives both PS and CS
Full Name requests

Abbreviation T24

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference 3GPP TS 48.018

This parameter indicates the timer used by the target BSS for
synchronizing CS handover and PS handover request information. The
timer start and stop conditions are described as follows:
Timer start: The BSC receives the PS-HANDOVER-REQUEST PDU
message that contains CS Indication IE or the HANDOVER REQUEST
message that contains PS Indication IE.
Timer stop: Both HANDOVER REQUEST and PS-HANDOVER-
REQUEST PDU messages are received, and PS Indication and CS
Indication IE contain the same information.
Description Timeout action: Measures for handling DTM handover failures

Instance BSC

Value Range and Step 40..90

Unit 100ms

Default Value 60

Default Value
Configuration Reason Set this parameter based on the general network condition.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

2-229

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.57 T3197
Full Name T3197

Abbreviation T3197

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference 3GPP TS 44.060

This parameter is the timer for the enhanced DTM CS release. The timer
start and stop conditions are described as follows:
Timer start: The Packet CS Release Indication message is sent by the
BSC.
Timer stop: The BSC receives a message indicating that the Packet SI
Status message has been completely received. After RR is released,
the Packet SI Status message is a required for keeping PS resources.
The BSC sends a Channel Release message indicating that the PS
transmission is kept after CS release.
Timeout action: If the Packet SI Status message is not received after the
timer times out, the BSC sends a Channel Release message indicating
Description that the PS transmission is not kept after CS release.

Instance BSC

Value Range and Step 0..65535

Unit 100ms

2-230

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 200

Default Value
Configuration Reason Set this parameter based on the general network condition.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features N/A

Related Parameters DTMEnhanceCapa

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.58 Paging Interval


Full Name Paging Interval

Abbreviation PagWaitTime

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter determines the time of the BSC in waiting for a paging
response after sending a paging message. The paging mode includes
precise paging and common paging.
If the BSC does not receive any response within this time range, the
Description BSC will initiate paging again according to the paging configuration.

Instance Cell

Value Range and Step 20..80

Unit 100ms

Default Value 25

2-231

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value A paging response from the MS can be received


Configuration Reason within 2.5s.

It is required to configure this parameter


Configuration Rule and
by considering the configuration of paging module and the transmission
Adjustment Suggestion
delay of Abit interface.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.2.59 2G Load synchronized to 3G Timer


Full Name 2G Load synchronized to 3G Timer

Abbreviation Load2gSynTimer

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is the timer for the services to obtain 2G cell load
information from the database.
Timeout action: The service saves the copy of obtained load information
in the storage area, and the synchronization platform synchronizes the
Description information to the 3G system.

Instance BSC

Value Range and Step 100..6000

Unit 1ms

Default Value 3000

2-232

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The timer for services to obtain 2G cell loads should not be set too short,
Configuration Reason otherwise, frequency actions reduce the efficiency.

The longer the timer is set, the worse real-time synchronizatione of


Configuration Rule and
loads, and the greater difficulty for the 3G side to make decisions. The
Adjustment Suggestion
shorter the timer is set, the better real-timenes, but greater handling load.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.60 2G Cell Radio Resource Synchronization Timer


Full Name 2G Cell Radio Resource Synchronization Timer

Abbreviation CrrmSynTimer

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

This parameter is the timer for performing the complete synchronization


of 2G cell attributes and the NACC information.
Timeout action: All 2G cell attributes and NACC information is
Description synchronized to the 3G system.

Instance BSC

Value Range and Step 1..60

Unit 100ms

Default Value 30

2-233

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Cell property and NACC information are synchronized through


Default Value
the synchronization platform. This features high efficiency and
Configuration Reason
synchronization can be performed frequently.

The longer the timer is set, the worse real-time synchronization


Configuration Rule and performance of loads, and the greater difficulty for the 3G side to make
Adjustment Suggestion decisions. The shorter the timer is set, the better real-timeness, but
greater processing load.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.61 Handover protecting timer to WCDMA/FDD


Full Name Handover protecting timer to WCDMA/FDD

Abbreviation T3121

Managed Object BSS Function Timer

3GPP Name T3121

3GPP Reference 3GPP TS 44.018

This parameter is Timer T3121, indicating the protection time after


sending Inter-System to Utran Handover Command (UM) to
MS.
The timer starts when BSC sends the "inter-system to utran handover
command" message to MS.
The timer stops when BSC receives "CLEAR COMMAND" message
from MSC or "HANDOVER FAILURE" message from MS.
Timeout action: The BSC sends CLEAR REQUEST message to MSC,
Description with the cause CAUSE_RI_MSG_FAIL (radio interface message failure).

2-234

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 1..650

Unit 100ms

Default Value 100

The default value is set in consideration of


Default Value the time needed for the MS to receive an inter-system handover
Configuration Reason command
and complete the handover.

A too large parameter value may result in the


Configuration Rule and
waste of channel resources and traffic congestion. A too small parameter
Adjustment Suggestion
value may decrease the handover success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.62 SubCell PingPong handover timer


Full Name SubCell PingPong handover timer

Abbreviation TscPingPang

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

2-235

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the time period for deciding whether a handover
in the subcell is ping-pong handover. If two handovers in a subcell are
performed within the time specified by this parameter, a ping-pong han-
dover between related subcells is recorded in the performance report.
The recorded cases include: the MS performs handover back and forth
between two subcells within the same site, or the MS performs handover
Description back and forth between two subcells between two sites.

Instance BSC

Value Range and Step 20..1000

Unit 100ms

Default Value 100

The default value is set based on a common


Default Value radio environment. Generally, it is deemed that a ping-pong handover
Configuration Reason occurs if handover occurs frequently between two subcells in 10
seconds.

The smaller the parameter value is, the less


restrictive the criterion for ping-pong handover is. Similarly, the
Configuration Rule and larger the parameter is, the more restrictive the criterion for ping-pong
Adjustment Suggestion handover is. This parameter can be used to evaluate whether
inter-subcell
handover parameters are properly set.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-236

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.63 Time of Cobcch wait for MR report


Full Name Time of Cobcch wait for MR report

Abbreviation TCobcchWaitMR

Managed Object BSS Function Timer

3GPP Name N/A

3GPP Reference N/A

When the BSC receives the assignment command from the MSC, if the
MR is not enough for deciding whether channels can be assigned in the
Description second sub-cell, the BSC sets this parameter to wait for more MR.

Instance BSC

Value Range and Step 0..30

Unit 100ms

Default Value 0

Waiting for the measurement report to determine whether to assign to


Default Value the second sub-cell can reduce the connectivity rate. If the first sub-cell
Configuration Reason is not so busy, services can be handed over to the second sub-cell
through the subsequent inter-cell handover.

If the call setup process takes a long time and involves encryption and
authentication, and measurement reports are already obtained before
assignment, set this parameter to 0.
Configuration Rule and
If the call setup process takes a short time, set this parameter to a non-0
Adjustment Suggestion
value to wait for the measurement report. However, this affects the
connection speed. Therefore, set this parameter to a non-0 value only
when the service is directly assigned to the second sub-cell.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version UR11.2 B

2-237

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail New

2.2.64 SDCCH Channel release period


Full Name SDCCH Channel release period

Abbreviation TSDRelPeriod

Managed Object BSS Function Timer

3GPP Name T3109

3GPP Reference 3GPP TS 44.018

This parameter indicates a period of releasing a Standalone Dedicated


Description Control Channel (SDCCH).

Instance BSC

Value Range and Step 0..1000

Unit 100ms

Default Value 50

Default Value The release period on the SDH is the same as the default value on the
Configuration Reason TCH.

Configuration Rule and The abnormal release time of the SD channel can be shortened in
Adjustment Suggestion accordance with test requirements.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-238

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.2.65 SDCCH Channel deactivation delay


Full Name SDCCH Channel deactivation delay

Abbreviation TSDDeactDelay

Managed Object BSS Function Timer

3GPP Name T3111

3GPP Reference 3GPP TS 44.018

Description This parameter indicates a delay of deactivating an SDCCH.

Instance BSC

Value Range and Step 1..300

Unit 100ms

Default Value 3

Default Value The deactivation delay on the SDH is the same as the default value
Configuration Reason on the TCH.

Configuration Rule and The parameter indicates release protection delay, and the value is within
Adjustment Suggestion 1s.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.2.66 Mute call detect timer


Full Name Mute call detect timer

Abbreviation MuteCallDetTimer

Managed Object BSS Function Timer

2-239

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Timer for a unilateral conversation check. The timer sets the threshold
of the package lost duration. If the package lost duration exceeds the
Description threshold, a unilateral conversation check is triggered.

Instance BSC

Value Range and Step 10..3000

Unit 100ms

Default Value 100

Default Value If there is no data transmission on a channel for 10 seconds, the BSC
Configuration Reason performs a check to detect a unilateral conversation.

The default value is recommended. If this parameter is set too low,


Configuration Rule and
handover decisions may not be made correctly; if the parameter is set too
Adjustment Suggestion
high, the subscriber may hook on, and the unilateral cannot be detected.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Timer

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3 BSS Function Handover


Control(GBssHandoverControl)
2.3.1 BSC Handover Control ID
Full Name BSC Handover Control ID

2-240

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation GBssHandoverControl

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

Description BSC Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.2 Handover synchronization indication support


Full Name Handover synchronization indication support

Abbreviation HoSyncInd

Managed Object BSS Function Handover Control

3GPP Name ROT: Report Observed Time Difference

3GPP Reference 3GPP TS44.018

2-241

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the parameter is set to 1 (Yes), the BSC adds Synchronization Indica-


tion IE to the sent Handover Command message and sets ROT to 1 for
both synchronized and asynchronized handovers. In this case, the MS
adds Mobile Observed Time Difference in the sent Handover Complete
message, indicating the clock reference difference between two handover
Description cells.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Generallly, the time reference difference between two cells does not
Configuration Reason need to be measured.

When the synchronized network (radio frame synchronization, which is


acchieved through the base station gaining an access to GPS signals) is
Configuration Rule and
used, users can set this parameter as "Yes", to observe the evaluated
Adjustment Suggestion
synchronization result of Mobile Observed Time Difference in the
HANDOVER COMPLETE message.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.3 Internal redirection enable


Full Name Internal redirection enable

Abbreviation InDREnable

2-242

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allow an assignment to request a


channel from other cells in the BSC when the assignment fails to obtain
Description a channel.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

The default value is Yes in system control


Default Value
parameters. Generally, it is required to modify only the related cell
Configuration Reason
parameters to control the level of the cell.

This function should be enabled to reduce network


congestion and uneven radio resource allocation and increase the call
completion rate when a cell is fluctuantly congested and its neighboring
Configuration Rule and cells have available service channels. However, enabling the function
Adjustment Suggestion will increase access delay and negatively affect user satisfaction.
In a heavily-congested network, enabling the function does not work.
In this case, capacity expansion and traffic balancing are much better
ways to relieve network congestion.

Change Mode Offline

Related features ZGB-03-01-002 Directed Retry

Related Parameters OutDREnable

The internal redirection function is enabled only when the BSC-level and
Relationship
cell-level switches are set to Yes.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-243

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.3.4 Outer redirection enable


Full Name Outer redirection enable

Abbreviation OutDREnable

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allow an assignment to request a


channel from the cells outside the BSC when the assignment fails to ob-
Description tain a channel.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value Generally, this function is disabled because


Configuration Reason it relates to handovers outside the MSC.

This function should be enabled to reduce network


congestion and uneven radio resource allocation and increase the call
completion rate when a cell is fluctuantly congested and its neighboring
Configuration Rule and cells have available service channels. However, enabling the function
Adjustment Suggestion will increase access delay and negatively affect user satisfaction.
In a heavily-congested network, enabling the function does not work.
In this case, capacity expansion and traffic balancing are much better
ways to relieve network congestion.

Change Mode Offline

Related features ZGB-03-01-002 Directed Retry

Related Parameters InDREnable

The outer redirection function is enabled only when the BSC-level and
Relationship
cell-level switches are set to Yes.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

2-244

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.3.5 BSC intracell handover enable


Full Name BSC intracell handover enable

Abbreviation HoIntraEnable

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allows the BSC to perform intra-cell


Description handovers.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason Handover is a basic function.

Configuration Rule and The default value is recommended. Generally,


Adjustment Suggestion intra-cell handovers are not controlled.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-245

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.3.6 SDCCH handover enable


Full Name SDCCH handover enable

Abbreviation SHoEnable

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates whether the SDCCH handover is allowed.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value Disable SDCCH handover when MS does not move


Configuration Reason at high speed because the duration on SD is very short.

Configuration Rule and SDCCH handover can be enabled for cells covering
Adjustment Suggestion motorway to improve the access success rate.

Change Mode Offline

Related features ZGO-02-02-004 SDCCH/SDCCH Handover

Related Parameters sdhoControl

A cell can support SDCCH handover only when


Relationship
both the BSC-level switch and the cell-level switch are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.7 Handover request response


Full Name Handover request response

2-246

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation HoACK

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether MSC should respond messages for


BSC outgoing handover. If the parameter is set to 1, the HANDOVER
REQUIRE message contains Response Request, and the MSC, upon
handover failure, will return the Response Request Reject message to
the BSC. If the parameter is set to 0, the MSC will not return the message
to the BSC upon handover failure, and the BSC knows the handover fails
Description when the timer T7 times out.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value The MSC are not required to give responses,


Configuration Reason but timeout action will be carried out.

Configuration Rule and It is recommended to set this parameter to


Adjustment Suggestion 1.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-247

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.3.8 Old BSS to new BSS information


Full Name Old BSS to new BSS information

Abbreviation OldToNewCtrl

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

In an outgoing handover, this parameter specifies the contents in the Old


BSS to New BSS Information contained in the HANDOVER REQUIRED
message.
The four items Synchronization Indication, Cipher Mode Setting,
Multi-Rate configuration, and Frequency List are controlled by the upper
four bits.
BIT3: Whether MultiRate configuration is sent. 0: NOT SENT, 1: SENT
BIT5: Whether the hopping frequency is set with the FreqList format.
0: NO, 1: YES
BIT6: Whether to optimize the setting of AMR MultiFrequency. 0: NO,
1: YES
BIT7: Whether the HANDOVER COMMAND contains the Cipher
information parameter. 0: NO, 1: YES
BIT8: Whether to optimize the synchronization information parameter. 0:
Description NO, 1:YES

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 64

Default Value This is a functional switch and is disabled by default. Bit 7: enabled
Configuration Reason by default.

Configuration Rule and Generally, the default value is recommended.


Adjustment Suggestion However, you can enable this function if necessary.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-248

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.9 Queuing indicator in handover required message


Full Name Queuing indicator in handover required message

Abbreviation HandOutQueInd

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether queuing is allowed during inter-BSC


outgoing handovers, that is, whether queuing is allowed according to the
Description Queuing Indicator parameter in the Handover Required message.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

The BSC decides whether to carry out a handover


Default Value
whenever it receives a measurement report. During such decisions,
Configuration Reason
the BSC possibly select different target cells.

During inter-BSC handovers, if channel congestion occurs in the target


cell, queuing can relieve the congestion. In this case, this parameter
of the source BSC must be set to "Handout queue enable", so that
Configuration Rule and
the Queuing Indicator parameter in the Handover Required message
Adjustment Suggestion
indicates queuing is allowed. In this way, the MSC indicates the target
BSC that queuing is allowed through the HANDOVER REQUEST
message.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

2-249

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.10 A+B solution for TD handover enabled


Full Name A+B solution for TD handover enabled

Abbreviation TDAplusBEnable

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the A+B solution for TD handover is


Description enabled.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 1

Default Value
Configuration Reason The default is TD handover A+B solution.

Configuration Rule and The default value is recommended if TDD cells


Adjustment Suggestion are configured in the network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-250

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail Update

2.3.11 Pingpong handover duration


Full Name Pingpong handover duration

Abbreviation PingPongDura

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is a timer used to determine whether a handover is a ping-


pong handover. The timer is started when an MS performs handover from
a cell. If the MS performs handover to the source cell, and the interval
between two handovers is shorter than the value of this parameter, this
Description handover is recorded as a ping-pong handover.

Instance BSC

Value Range and Step 0..60

Unit s

Default Value 10

Generally, the handover is regarded as a ping-pong


Default Value
handover if an MS is handed over forth and back between two cells
Configuration Reason
within 10 seconds.

The default value is recommended. The larger


Configuration Rule and
the parameter value is, the longer the time is in which a handover
Adjustment Suggestion
is deemed as a ping-pong handover.

Change Mode Offline

Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-251

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On
Sdcch
Full Name Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch

Abbreviation NcellSelCtrlPbgt1

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


PBGT value is applied for neighbor cell selection in the case of PBGT
Description handover on the SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

It is recommended that this switch be enabled.


Configuration Rule and
After that, the neighbor cell selection during PBGT handover judgment
Adjustment Suggestion
is more reasonable.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-252

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On
Tch
Full Name Use N/P When Select Neighbour Cell for Pbgt Handover On Tch

Abbreviation NcellSelCtrlPbgt2

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


PBGT value is applied for neighbor cell selection in the case of PBGT
Description handover on the TCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

It is recommended that this switch be enabled.


Configuration Rule and
After that, the neighbor cell selection during PBGT handover judgment
Adjustment Suggestion
is more reasonable.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-253

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Sdcch
Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Full Name Sdcch

Abbreviation NcellSelCtrlUlQ1

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of uplink quality
Description handover on the SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-254

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Tch
Full Name Use N/P When Select Neighbour Cell for Uplink Quality Handover On Tch

Abbreviation NcellSelCtrlUlQ2

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of uplink quality
Description handover on the TCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-255

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Sdcch
Use N/P When Select Neighbour Cell for Downlink Quality Handover On
Full Name Sdcch

Abbreviation NcellSelCtrlDlQ1

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of downlink
Description quality handover on the SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-256

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Tch
Use N/P When Select Neighbour Cell for Downlink Quality Handover On
Full Name Tch

Abbreviation NcellSelCtrlDlQ2

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of downlink
Description quality handover on the TCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-257

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.18 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Sdcch
Use N/P When Select Neighbour Cell for Uplink Level Handover On Sd-
Full Name cch

Abbreviation NcellSelCtrlUlLev1

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of uplink level
Description handover on the SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

2-258

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.19 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Tch
Full Name Use N/P When Select Neighbour Cell for Uplink Level Handover On Tch

Abbreviation NcellSelCtrlUlLev2

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of uplink level
Description handover on the TCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

Related features N/A

2-259

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.20 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Sdcch
Use N/P When Select Neighbour Cell for Downlink Level Handover On
Full Name Sdcch

Abbreviation NcellSelCtrlDlLev1

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of downlink
Description level handover on the SDCCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

Change Mode Offline

2-260

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.21 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Tch
Use N/P When Select Neighbour Cell for Downlink Level Handover On
Full Name Tch

Abbreviation NcellSelCtrlDlLev2

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used to control whether the N value, P value, or average


level value is applied for neighbor cell selection in the case of downlink
Description level handover on the TCH.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The original network KPIs remain unchanged.

Usually, this switch is disabled. During neighbor


Configuration Rule and
cell selection, using the N or P value is more reliable but may cause
Adjustment Suggestion
handover delay.

2-261

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.3.22 BSC Internal Handover Parameter of IPA


Full Name BSC Internal Handover Parameter of IPA

Abbreviation IPAInterHo

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the handover method employed by CS services


when performing intra-BSC Handover in the case of 3GPP IPA.
By default, compatible versions are used before and after the internal
handover, and the handover is performed conforming to the protocol.
1: The services use the handover procedure supported by the MSC for
handover from AMR-HR to AMR-FR using SET 1.
Description 2: The internal handover switches to the BSC-preferred speech version.

Instance BSC

Value Range and Step 0..2

Unit N/A

Default Value 0

The value 0 and try to remain TRFO. In addition, as specified in the


Default Value protocol, SET1 is the rate set of FR AMR and HR AMR. Handovers do
Configuration Reason not require MAC processing. If MSC supports such kind of handover
modes, do not set it to 1.

2-262

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

In normal situations, set this parameter to 0. When MSC does not


Configuration Rule and support handovers between AMR FR SET1 and HR SET1, set this
Adjustment Suggestion parameter to 1. If the voice version with BSC priority is preferred, set
this parameter to 2.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.23 Handover between cells of different net support


Full Name Handover between cells of different net support

Abbreviation InterNetHO

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the inter-cell (with different


network IDs) handover. If it is set to "NO", The adjacent cell to which
handover (or reselection) performed must have the sane network ID
Description (MCC/MNC) as this cell.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-263

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Handovers between different telecom operators may involve extra
Configuration Reason charge. It is disabled by default.

Configuration Rule and In general, set this parameter to 0. Set this parameter to 1 if specially
Adjustment Suggestion required by the telecom operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.3.24 the policy of choosing speech version in 3GPP IPA BSC


handover
Full Name the policy of choosing speech version in 3GPP IPA BSC handover

Abbreviation ipabschotype

Managed Object BSS Function Handover Control

3GPP Name N/A

3GPP Reference N/A

Description the policy of choosing speech version in 3GPP IPA BSC handover

Instance BSC

0: the same channel type in handover preferred


1: the channel type in ASSIGNMENT REQUEST preferred , when using
AMR
Value Range and Step 2: the channel type in ASSIGNMENT REQUEST preferred , anytime

Unit N/A

Default Value 0

2-264

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The default value is the one specified in the protocol.

Modify this parameter if the telecom operator requires that HR-type calls
Configuration Rule and be reduced. Generally, modify this parameter to 1. If a comparatively
Adjustment Suggestion small number of MSs support AMR in the local area, modify this
parameter to 2.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function Handover Control

Parameter Modifying
Version UR11.2 C

Parameter Modifying
Detail New

2.4 eMLPP Configuration(GBssEmlpp)


2.4.1 eMLPP ID
Full Name eMLPP ID

Abbreviation GBssEmlpp

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

Description eMLPP ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

2-265

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.2 Queue indicate when assign


Full Name Queue indicate when assign

Abbreviation queueIndAss

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

During an assignment, this parameter decides whether to allow queuing


or carry out the assignment according to the cell settings when there are
Description no available channels in the cell.

Instance BSC

0: Queue forbidden when assign


1: Queue allowed when assign
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

2-266

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value Generally, you do not have to enable the assignment


Configuration Reason queuing function when there are enough network resources.

Configuration Rule and When the traffic is high, enabling this function
Adjustment Suggestion can relieve channel congestions but will increase the queuing time.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters PreemptionIndAss


ForcedHolndAss
QueueIndAss

When either PreemptionIndAss or ForcedHolndAss is set to "allowed",


QueueIndAss must be set to "allowed".
Relationship When either PreemptionIndAss or ForcedHolndAss is set to "According
to the cell", QueueIndAss must be set to "allowed" or "According to the
cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.3 Queue allowed when handover


Full Name Queue allowed when handover

Abbreviation queueIndHo

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

During a handover, this parameter decides whether to allow queuing or


carry out the assignment according to the cell settings when there are no
Description available channels in the cell.

Instance BSC

2-267

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Queue forbidden when handover


1: Queue allowed when handover
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

Default Value There are many target cells for handovers and
Configuration Reason the time interval between handover attempts is short.

Configuration Rule and Enabling this function can relieve channel


Adjustment Suggestion congestions in busy hours.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters PreemptionIndHo


ForcedHolndHo
QueueIndHo

When either PreemptionIndHo or ForcedHolndHo is set to "allowed",


QueueIndHo must be set to "allowed".
Relationship
When either PreemptionIndHo or ForcedHolndHo is set to "allowed",
QueueIndHo must be set to "allowed" or "According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.4 Forced handover indication for assign


Full Name Forced handover indication for assign

Abbreviation forcedHoIndAss

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

2-268

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter decides whether to allow forced handovers during an as-


signment or carry out the assignment according to the cell settings when
Description there are no available channels in the cell.

Instance BSC

0: Forced handover forbidden when assign


1: Forced handover allowed when assign
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If you want high-priority users to access channels


through forced handover during assignments, you should enable this
Configuration Rule and
switch. If the forced handover function will be used by
Adjustment Suggestion
AssPreemptstrategy
during the assignment, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters QueueIndAss

When ForcedHolndAss is set to "According to the cell", QueueIndAss


Relationship
must be set to "allowed" or "According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.5 Forced handover indication for handover


Full Name Forced handover indication for handover

Abbreviation forcedHoIndHo

Managed Object eMLPP Configuration

2-269

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allow forced handovers during a han-


dover or carry out the handover according to the cell settings when there
Description are no available channels in the cell.

Instance BSC

0: Forced handover forbidden when handover


1: Forced handover allowed when handover
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If you want high-priority users to access channels


Configuration Rule and through forced handover during assignments, you should enable this
Adjustment Suggestion switch. If the forced handover function will be used by HoPreemptstrategy
during the handover, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters QueueIndHo

When ForcedHolndHo is set to "According to the cell", QueueIndHo


Relationship
must be set to "allowed" or "According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.6 Forced release indicate when assign


Full Name Forced release indicate when assign

Abbreviation preemptionIndAss

2-270

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allow forced releases during an as-


signment or carry out the assignment according to the cell settings when
Description there are no available channels in the cell.

Instance BSC

0: Forced release forbidden when assign


1: Forced release allowed when assign
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

Forced releases have more effect on low-priority


Default Value
users. By default, the forced release function is disabled. You can
Configuration Reason
enable it if necessary.

If you want high-priority users to access channels


Configuration Rule and first during assignments, you should enable the forced release function.
Adjustment Suggestion If the forced release function will be used by AssPreemptstrategy
during the assignment, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters QueueIndAss

When PreemptionIndAss is set to "allowed", QueueIndAss must be set


to "allowed".
Relationship
When PreemptionIndAss is set to "According to the cell", QueueIndAss
must be set to "allowed" or "According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-271

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.4.7 Forced release allowed when handover


Full Name Forced release allowed when handover

Abbreviation preemptionIndHo

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether to allow forced releases during a han-


dover or carry out the handover according to the cell settings when there
Description are no available channels in the cell.

Instance BSC

0: Forced release forbidden when handover


1: Forced release allowed when handover
Value Range and Step 2: According to the cell

Unit N/A

Default Value 0

Forced releases have more effect on low-priority


Default Value
users. By default, the forced release function is disabled. You can
Configuration Reason
enable it if necessary.

If you want high-priority users to access channels


Configuration Rule and first during handovers, you should enable the forced release function.
Adjustment Suggestion If the forced release function will be used by HoPreemptstrategy during
the handover, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters QueueIndHo

When PreemptionIndHo is set to "According to the cell", QueueIndHo


Relationship
must be set to "allowed" or "According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-272

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.4.8 Wait resource timer after forced handover (ForceHoWait,


100ms)
Full Name Wait resource timer after forced handover (ForceHoWait, 100ms)

Abbreviation forceHoWait

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the time to wait for resources after a forced
handover. If a resource is obtained within this period, no more forced
handovers or releases will be initiated and the assignment will stop
queuing. If not, more forced handovers or releases will be initiated or
the assignment will still queue for resources, depending on parameter
settings. The parameter should be set according to the time required
for a complete handover.
Start: A forced handover is initiated and the assignment waits for
channel releases.
Stop: The user that initiates the forced release accesses a channel.
Timeout action: More forced handovers or releases will be initiated or
the assignment will still queue for resources, depending on parameter
Description settings.

Instance BSC

Value Range and Step 10..40

Unit 100ms

Default Value 25

Default Value The default value is larger than the time required
Configuration Reason for a complete handover.

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion time required for a complete handover and channel release.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-273

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.9 Wait resource timer after forced release


Full Name Wait resource timer after forced release

Abbreviation forceRelWait

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the time to wait for resources after a forced
release. If a resource is obtained within this period, no more forced
releases will be initiated and the assignment will stop queuing. If not,
more forced releases will be initiated or the assignment will still queue
for resources, depending on specified settings. The parameter should
be set according to the time required for a complete forced release.
Start: A forced release is initiated and the assignment waits for channel
releases.
Stop: The user that initiates the forced release accesses a channel.
Timeout action: More forced releases will be initiated or the assignment
Description will still queue for resources, depending on parameter settings.

Instance BSC

Value Range and Step 10..40

Unit 100ms

Default Value 25

Default Value The default value is larger than the time required
Configuration Reason for a complete channel release.

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion time required for a complete channel release.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

2-274

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.10 Enough low priority for preemption


Full Name Enough low priority for preemption

Abbreviation lowestPriority

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

During searches for the targets of forced handovers or releases, if the pri-
orities of the targets are not higher than this priority, these targets will be
considered to have the lowest priorities and can be the targets of forced
handovers or releases. No more searches will be done. In this way, the
number of times of searches is reduced. The value "1" indicates the high-
Description est priority.

Instance BSC

Value Range and Step 1..15

Unit N/A

Default Value 14

Default Value By default, the user who has the lowest priority
Configuration Reason is found.

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion actual lowest priority and the expected lowest priority.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

2-275

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.11 Enough call duration for preemption


Full Name Enough call duration for preemption

Abbreviation longCallDuration

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

During searches for the targets of forced handovers or releases, if the call
duration of the targets is larger than this parameter, these targets will be
considered to have enough long calls and can be the targets of forced
handovers or releases. No more searches for the target with the longest
call duration will be done. In this way, the number of times of searches is
Description reduced.

Instance BSC

Value Range and Step 0..65535

Unit 480ms

Default Value 50

Default Value This is a special function. The default value


Configuration Reason is set according to your specific needs.

You can set this parameter to a higher value


Configuration Rule and
to ensure that the users with short calls will not be the targets
Adjustment Suggestion
of forced releases.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

2-276

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.12 Forced handover target penalty time


Full Name Forced handover target penalty time

Abbreviation forceHoPenalty

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the time period in which the target of forced
handover cannot be a handover target any more after the forced
handover fails.
Start: The target fails to carry out the handover and release the channel.
Stop: None.
Description At expiry: The subscriber can be a target of forced handover again.

Instance BSC

Value Range and Step 0..255

Unit 480ms

Default Value 60

Default Value The default penalty time is set to avoid failures


Configuration Reason caused by repeated forced handovers of the same user.

This parameter should be set according to the


Configuration Rule and
radio signal changes of the user that is handed over forcedly. When
Adjustment Suggestion
the user moves quickly, you can set a shorter penalty time.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

2-277

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.13 Priority of emergency service


Full Name Priority of emergency service

Abbreviation emergServicelPrio

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the priority of emergency calls. Those calls with
priorities higher than or equal to the parameter value are emergency calls.
Description The value "1" indicates the highest priority.

Instance BSC

Value Range and Step 1..15

Unit N/A

Default Value 1

Default Value Generally, the priority of emergency calls


Configuration Reason is 1.

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion priority of your local emergency calls.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

2-278

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.14 User priority threshold for EMLPP


Full Name User priority threshold for EMLPP

Abbreviation priThreshold

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter (PriThreshold) uses the service of preferred access for


high-priority subscriber, that is eMLPP service, the system may set some
reserved channels (currently, only full rate TCH channels are supported
to be the reserved channels).
When CS instance calls database to apply for channels, the
subscriber's PriorityLevel information reaches to database, and is
compared with PriThreshold in the database and BSC table. When
PriorityLevelPriThreshold (the less the subscriber's priority level value,
the higher the priority level, that is the subscriber's priority level is not
Description lower than PriThreshold priority), the reserved channel can be used.

Instance BSC

Value Range and Step 1..15

Unit N/A

Default Value 2

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion You can adjust this parameter as needed.

Change Mode Offline

2-279

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-01-03-001--Emlpp

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.15 Reserved channel first


Full Name Reserved channel first

Abbreviation rsvChanFirst

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the selection order of reserved channel and


non-reserved channel. If this feature is enabled, the reserved channel
has the higher priority.
Yes: reserved channel is preferred.
Description No: non-reserved channel is preferred.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value Generally, reserved channels are used first


Configuration Reason to avoid the waste of channel resources.

Configuration Rule and The default value is recommended unless otherwise


Adjustment Suggestion necessary.

Change Mode Offline

Related features ZGO-01-03-001--Emlpp

2-280

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.16 Support EMLPP(SupportEMLPP)


Full Name Support EMLPP(SupportEMLPP)

Abbreviation supportEmlpp

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the eMLPP function is enabled.


0 (NO): Disabled.
1 (YES): Enabled. The related functions include queuing, forced
Description handover and release, and reserved channels.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value The queue-up function is always applied. This switch is enabled by
Configuration Reason default, to avoid that the queue-up function does not take effect.

Generally, the switch can be enabled. It can be disabled to make such


Configuration Rule and
functions as queuing, forced handover and release, and reserved
Adjustment Suggestion
channels invalid.

Change Mode Offline

2-281

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

ZGO-01-03-001
Related features eMLPP

Related Parameters EMLPPThs


EMLPPThs
QueueIndAss
PreemptionIndAss
ForcedHolndAss
ForcedHolndHo
PreemptionIndHo
QueueIndHo

Relationship If this parameter is set to 0 and does not support EMLPP, it is invalid.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.4.17 EMLPP channel reserved rate


Full Name EMLPP channel reserved rate

Abbreviation emlppThs

Managed Object eMLPP Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the proportion of channels reserved for high-pri-


ority subscribers when you enable the eMLPP service function, which al-
Description lows high-priority users to access channels first.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 0

2-282

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason special parameter, the default value is not researve.

Configuration Rule and


Adjustment Suggestion The parameter increase, high priority user can be

Change Mode Offline

Related features ZGO-01-03-001--Emlpp

Related Parameters EMLPPThs

If the parameter UseCelleMLPPThs is enabled,


the cell-level parameter EMLPPThs should be enabled. If not, the
Relationship
BSC-level
parameter EMLPPThs should be enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->eMLPP Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5 eMLPP User Priority


Configuration(GEmlppUserPriority)
2.5.1 eMLPP User Priority Configuration ID
Full Name eMLPP User Priority Configuration ID

Abbreviation GEmlppUserPriority

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

Description eMLPP User Priority Configuration ID

Instance None

Value Range and Step 1..15

2-283

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.2 User priority


Full Name User priority

Abbreviation userPriority

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter, not requiring manual setting, provides the priorities corre-
sponding to a group of eMLPP parameters. The given priorities are equal
Description to the priority level information contained in the A interface messages.

Instance BSC

Value Range and Step 1..15

Unit N/A

Default Value 1

2-284

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The value is fixed to 1-15.

Configuration Rule and


Adjustment Suggestion The value is fixed to 1-15.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.3 Strategy for preemption when assign


Full Name Strategy for preemption when assign

Abbreviation assPreemptstrategy

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the preemption strategy in the assignment


process when there are no available channels.
Its value corresponds to 15 levels of priority (1 to 15) which are defined
by the parameter "Priority" in the Assignment Command message or
Description Handover Request message from the CN.

Instance BSC

0: Only forced handover


1: First forced handover, if fail, forced release
Value Range and Step 2: First forced release

Unit N/A

2-285

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value Relatively, forced handovers have less effect


Configuration Reason on low-priority users.

Setting this parameter to "Only forced handover"


has the least effect on low-priority users. In this case, however,
high-priority users are less likely to access channels. If you set
the parameter to "First forced handover, if fail, forced release",
Configuration Rule and high-priority users are more likely to access channels, but will spend
Adjustment Suggestion more time in accessing a channel when a forced handover fails. If
you set the parameter to "First forced release", forced releases will
be carried out if possible. In this case, high-priority users are
more likely to preempt channels, but low-priority users will be affected
more.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.4 Strategy for preemption when handover


Full Name Strategy for preemption when handover

Abbreviation hoPreemptstrategy

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

2-286

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the preemption strategy in handovers when


there are no available channels.
Its value corresponds to 15 levels of priority (1 to 15) which are defined
by the parameter "Priority" in the Assignment Command message or
Description Handover Request message from the CN.

Instance BSC

0: Only forced handover


1: First forced handover, if fail, forced release
Value Range and Step 2: First forced release

Unit N/A

Default Value 0

Default Value Relatively, forced handovers have less effect


Configuration Reason on low-priority users.

Setting this parameter to "Only forced handover"


has the least effect on low-priority users. In this case, however,
high-priority users are less likely to access channels. If you set
the parameter to "First forced handover, if fail, forced release",
Configuration Rule and high-priority users are more likely to access channels, but will spend
Adjustment Suggestion more time in accessing a channel when a forced handover fails. If
you set the parameter to "First forced release", forced releases will
be carried out if possible. In this case, high-priority users are
more likely to preempt channels, but low-priority users will be affected
more.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-287

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.5.5 Max forced handover times when assign


Full Name Max forced handover times when assign

Abbreviation assForcedHoTry

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum number of forced handover


attempts when there are no available channels in the cell during an
assignment. After a forced handover is initiated, if one of the following
three events happens and the maximum number is not reached, more
forced handovers can be attempted:
(1) The subscriber whose services are forcibly handed over fails to
request for channels in its adjacent cells.
(2) The forced handover fails.
(3) The subscriber whose services are forcibly handed over fails to
Description release the channel in the time specified by the parameter ForceHoWait.

Instance BSC

Value Range and Step 1..5

Unit N/A

Default Value 1

Default Value Setting the default value to 1 increases the


Configuration Reason success rate of forced handovers and affects fewer users.

Configuration Rule and For high-priority users, more forced handovers


Adjustment Suggestion can be attempted if you have not enabled the forced release function.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

2-288

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.5.6 Max forced handover times when handover


Full Name Max forced handover times when handover

Abbreviation hoForcedHoTry

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum number of attempted forced


releases when there are no available channels in the cell during a
handover. After a forced handover is started, if one of the following three
events happens and the maximum number is not reached, more forced
handovers can be attempted:
(1) The user whose services are handed over forcedly fails to request
for channels in its adjacent cells.
(2) The forced handover fails.
(3) The user whose services are handed over forcedly fails to release
Description the channel in ForceHoWait.

Instance BSC

Value Range and Step 1..5

Unit N/A

Default Value 1

Default Value Setting the default value to 1 increases the


Configuration Reason success rate of forced handovers and affects fewer users.

Configuration Rule and For high-priority users, more forced handovers


Adjustment Suggestion can be attempted if you have not enabled the forced release function.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-289

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.7 Max forced release times when assign


Full Name Max forced release times when assign

Abbreviation assForcedRelTry

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum number of attempted forced re-


leases when there are no available channels in the cell during an assign-
ment. After a forced release is started, if the user fails to release the
channel in ForceRelWait and the maximum number is not reached, more
Description forced releases can be attempted.

Instance BSC

Value Range and Step 1..3

Unit N/A

Default Value 1

Default Value Setting the default value to 1 increases the


Configuration Reason success rate of forced handovers and affects fewer users.

Configuration Rule and For high-priority users, more attempted forced


Adjustment Suggestion releases can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-290

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.8 Max forced release times when handover


Full Name Max forced release times when handover

Abbreviation hoForcedRelTry

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum number of attempted forced re-


leases when there are no available channels in the cell during a handover.
After a forced release is started, if the user fails to release the channel in
ForceRelWait and the maximum number is not reached, more forced re-
Description leases can be attempted.

Instance BSC

Value Range and Step 1..3

Unit N/A

Default Value 1

Default Value Setting the default value to 1 increases the


Configuration Reason success rate of forced handovers and affects fewer users.

Configuration Rule and For high-priority users, more attempted forced


Adjustment Suggestion releases can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-291

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.9 Preemption duration when assign


Full Name Preemption duration when assign

Abbreviation assPreempTimer

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the time period in which preemptions (forced


handovers or releases) can be initiated when there are no available
channels in the cell during an assignment. If the duration expires,
services must queue (The queuing period includes the preemption time)
and no more forced handovers or releases will be initiated.
Start: The assignment triggers a preemption, that is, attempted forced
handovers or releases begin.
Stop: A channel is accessed.
Description At expiry: Forced handovers or releases will not be attempted any more.

Instance BSC

Value Range and Step 25..130

Unit 100ms

Default Value 40

Default Value Four seconds are enough for attempting multiple


Configuration Reason preemptions.

Configuration Rule and For high-priority users, a higher value can


Adjustment Suggestion be set to make it easier to access channels through preemption.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters RmsT11


AssPreempTimer

2-292

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

At the same priority, RmsT11 must be higher than AssPreempTimer.


Relationship At the same priority, AssForceRelTimer must be lower than
AssPreempTimer.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.10 Preemption duration when handover


Full Name Preemption duration when handover

Abbreviation hoPreempTimer

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the time period in which preemptions (forced


handovers or releases) can be initiated when there are no available
channels in the cell during a handover. If the duration expires, services
must queue (The queuing period includes the preemption time) and no
more forced handovers or releases will be initiated.
Start: The handover triggers a preemption, that is, attempted forced
handovers or releases begin.
Stop: A channel is accessed.
Description At expiry: Forced handovers or releases will not be attempted any more.

Instance BSC

Value Range and Step 10..130

Unit 100ms

Default Value 30

Default Value Three seconds are enough for attempting multiple


Configuration Reason preemptions.

2-293

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and For high-priority users, a higher value can


Adjustment Suggestion be set to make it easier to access channels through preemption.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters RmsTqho


HoForceRelTimer

At the same priority, RmsTqho must be higher than HoPreempTimer.


Relationship At the same priority, HoForceRelTimer must be lower than
HoPreempTimer.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.11 Timer for start forced release when assign


Full Name Timer for start forced release when assign

Abbreviation assForceRelTimer

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

If there are no available channels in the cell during an assignment and


both forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated during the assignment.
Stop: A channel is accessed.
Description At expiry: Forced releases will be attempted.

Instance BSC

2-294

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 20..125

Unit 100ms

Default Value 30

Default Value The default value includes the time required


Configuration Reason to access a channel through forced release.

For high-priority users, you can set this parameter


Configuration Rule and
to a lower value for earlier forced releases if you have enabled the
Adjustment Suggestion
forced release function.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters AssPreempTimer

At the same priority, AssForceRelTimer must


Relationship
be lower than AssPreempTimer.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.12 Timer for start forced release when handover


Full Name Timer for start forced release when handover

Abbreviation hoForceRelTimer

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

2-295

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If there are no available channels in the cell during a handover and both
forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated.
Stop: A channel is accessed.
Description At expiry: Forced releases will be attempted.

Instance BSC

Value Range and Step 10..125

Unit 100ms

Default Value 25

Default Value The default value includes the time required


Configuration Reason to access a channel through forced release.

For high-priority users, you can set this parameter


Configuration Rule and
to a lower value for earlier forced releases if you have enabled the
Adjustment Suggestion
forced release function.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters HoPreempTimer

At the same priority, HoForceRelTimer must be lower than


Relationship
HoPreempTimer.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.5.13 Interval for search forced handover target when assign


Full Name Interval for search forced handover target when assign

2-296

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation assForceHoInterval

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced handover is initiated during the
assignment.
Stop: Forced releases are attempted after the timer expires.
Description At expiry: Another search for the forced handover target will be done.

Instance BSC

Value Range and Step 5..20

Unit 100ms

Default Value 5

The default value makes it possible to access


Default Value
channels through multiple attempted forced handovers with a reasonable
Configuration Reason
frequency.

Configuration Rule and For high-priority users, a shorter interval


Adjustment Suggestion can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-297

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.5.14 Interval for search forced handover target when handover


Full Name Interval for search forced handover target when handover

Abbreviation hoForceHoInterval

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced handover is initiated.
Stop: Forced releases are attempted after the timer expires.
Description At expiry: Another search for the forced handover target will be done.

Instance BSC

Value Range and Step 5..20

Unit 100ms

Default Value 5

The default value makes it possible to access


Default Value
channels through multiple attempted forced handovers with a reasonable
Configuration Reason
frequency.

Configuration Rule and For high-priority users, a shorter interval


Adjustment Suggestion can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-298

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.5.15 Interval for search forced release target when assign


Full Name Interval for search forced release target when assign

Abbreviation assForceRelInterval

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced release is initiated during the
assignment.
Stop: The timer for preemption expires.
Description At expiry: Another search for the forced release target will be done.

Instance BSC

Value Range and Step 5..20

Unit 100ms

Default Value 5

The default value makes it possible to access


Default Value
channels through multiple attempted forced releases with a reasonable
Configuration Reason
frequency.

Configuration Rule and For high-priority users, a shorter interval


Adjustment Suggestion can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-299

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.5.16 Interval for search forced release target when handover


Full Name Interval for search forced release target when handover

Abbreviation hoForceRelInterval

Managed Object eMLPP User Priority Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced release is initiated during the
handover.
Stop: The timer for preemption expires.
Description At expiry: Another search for the forced release target will be done.

Instance BSC

Value Range and Step 5..20

Unit 100ms

Default Value 5

The default value makes it possible to access


Default Value
channels through multiple attempted forced releases with a reasonable
Configuration Reason
frequency.

Configuration Rule and For high-priority users, a shorter interval


Adjustment Suggestion can be set.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-300

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.5.17 Queue timer for assign


Full Name Queue timer for assign

Abbreviation rmsT11

Managed Object eMLPP User Priority Configuration

3GPP Name T11

3GPP Reference 3GPP TS 48.008

This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during an assignment. If
no resource is obtained during the time period, the assignment fails.
Start: No channel is available for the assignment and the assignment
queues.
Stop: A channel is accessed.
At expiry: The channel allocation will fail and an assignment failure
Description message will be sent to the MSC.

Instance BSC

Value Range and Step 10..150

Unit 100ms

Default Value 60

The default value ensures that there is enough


Default Value
time for channel releases and it will not be long before a channel
Configuration Reason
allocation.

Configuration Rule and You can set this parameter to a reasonably


Adjustment Suggestion higher value.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters AssPreempTimer

At the same priority, RmsT11 must be higher


Relationship
than AssPreempTimer.

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

2-301

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.5.18 Queue timer for handover


Full Name Queue timer for handover

Abbreviation rmsTqho

Managed Object eMLPP User Priority Configuration

3GPP Name Tqho

3GPP Reference 3GPP TS 48.008

This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during a handover. If no
resource is obtained during the time period, the handover fails.
Start: No channel is available for the handover and the handover queues.
Stop: A channel is accessed.
Description At expiry: The channel allocation and handover attempt will fail.

Instance BSC

Value Range and Step 10..150

Unit 100ms

Default Value 20

The default value ensures that there is enough


Default Value
time for channel releases and it will not be long before a channel
Configuration Reason
allocation.

The handover queuing time should not be too


Configuration Rule and long because subsequent measurement reports can trigger new
Adjustment Suggestion handover
attempts.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters HoPreempTimer

Relationship At the same priority, RmsTqho must be higher than HoPreempTimer.

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

2-302

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->eMLPP Configuration->eMLPP User Priority
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6 BSS Function PS(GBssFunctionPS)


2.6.1 BSC PS ID
Full Name BSC PS ID

Abbreviation GBssFunctionPS

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

Description BSC PS ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-303

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.2 Bvc flow control period


Full Name Bvc flow control period

Abbreviation CellFcPer

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter is the BVC leakage ratio measurement period in the


BVC Flow Control process, that is, BVC long measurement period.
To provide reference to the BVC flow control at SGSN side, the BSSGP
process at BSS side periodically measures the current BVC leakage
ratio. BSC initiates the BVC flow control procedure unconditionally
when the long measurement timer overflows. SGSN confirms to BSC
if the difference of leakage ratios between the two times exceeds
CellFcThs.
BSC also initiates BVC flow control procedure with SGSN confirmation
if the short measurement timer overflows, and the difference of the
leakage ratio between the two timers exceed CellFcThs. The conditions
of timer start, stop, and timeout actions are as follows:
Timer start: Cell is being created.
Timer stop: The cell is blocked or deleted.
Description Timeout action: BVC flow control process is initiated unconditionally.

Instance BSC

Value Range and Step 100..65535

Unit 10ms

Default Value 1000

Default Value
Configuration Reason Recommended value from field experience

2-304

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The default value 1000 is recommended. A shorter period may increase


the load at the Gb interface. A longer period may cause the failure of
the BVC flow control.
Configuration Rule and A too large parameter value may result in a delay of flow control.
Adjustment Suggestion An improperly-set parameter value will cause intermittent download and
influence indexes relevant to throughput efficiency.
Set an appropriate period according to the settings of the SGSN. Make
sure that the parameter value is matching with the SGSN.

Change Mode Offline

Related features ZGB-03-05-016 Downlink BVC Flow Control

Related Parameters BVCFlowCtrl

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.6.3 MS flow control period


Full Name MS flow control period

Abbreviation MsFcPer

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

2-305

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is the MS leakage ratio measurement period in the MS


Flow Control process.
For reference of flow control at the SGSN side, the BSSGP process at
the BSS side periodically measures the current leakage ratio of each
MS. When the statistic timer overflows, the MS Flow Control process
is initiated unconditionally.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSSGP receives the downlink LLC frame at idle status.
Timer stop: downlink LLC frame transmission is done.
Description Timeout action: MS flow control process is initiated unconditionally.

Instance BSC

Value Range and Step 100..65535

Unit 10ms

Default Value 600

Default Value
Configuration Reason Recommended value from field experience

The default value 600 is recommended. A shorter


Configuration Rule and
period may increase the load at the Gb interface. A longer period
Adjustment Suggestion
may cause the failure of the MS flow control.

Change Mode Offline

Related features ZGB-03-05-017 Downlink MS Flow Control

Related Parameters MSFlowCtrl

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.6.4 Max times of radio access capabilities update retry


Full Name Max times of radio access capabilities update retry

2-306

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation UpdateMax

Managed Object BSS Function PS

3GPP Name RA-CAPABILITY-UPDATE-RETRIES

3GPP Reference 3GPP TS48.018

This is a BSSGP layer parameter used to specify the maximum number


of times the BSS retries to obtain the radio access capability of an MS
via the Radio Access Capability Update procedure when the BSS does
not have the information of the access capabilities of MSs. The access
capabilities are required by the BSS for assigning a proper packet
channel to each MS when the MS is establishing the uplink TBF.
The related procedure is as follows:
1. The BSS sends the RADIO ACCESS CAPABILITIES UPDAE
message to the SGSN.
2. If the BSS does not receive the RADIO ACCESS CAPABILITIES
UPDAE ACK/NACK message from the SGSN, the BSS re-starts the
procedure.
3. The BSC retries the procedure for the number of times specified
by UpdateMax, and, if still not receives returned messages, stops the
RADIO ACCESS CAPABILITIES UPDATE procedure and notifies the
Description OMS.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-307

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.5 Max times of PFC create retry


Full Name Max times of PFC create retry

Abbreviation DownloadBssPfcMax

Managed Object BSS Function PS

3GPP Name DOWNLOAD-BSS-PFC-RETRIES

3GPP Reference 3GPP TS48.018

Max retry times to create PFC. If "Creat BSS PFC" is not received before
timer BSSGPT6 is timeout, BSS sends "Download BSS PFC" message
according to max times of retrying to create PFC. If "Create BSS PFC"
is not received still after trying DownLoadBSSPRCMax+1, the process is
Description completed and inform O&M.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters PFCSupport

This parameter is only valid when the switch of PFC process is enabled
Relationship
in the BSC.

Related Interfaces Gb

2-308

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.6 Max times of PFC modify retry


Full Name Max times of PFC modify retry

Abbreviation ModifyBssPfcMax

Managed Object BSS Function PS

3GPP Name MODIFY-BSS-PFC-RETRIES

3GPP Reference 3GPP TS48.018

Max retry times to modify PFC. If "Modify BSS PFC Ack" is not received
before timer BSSGPT8 is timeout, BSS sends "Modify BSS PFC"
message according to max times of retrying to modify PFC. If "Modify
BSS PFC Ack" is not received still after trying ModifyBssPFCMax +1, the
Description process is completed and inform O&M.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters PFCSupport

2-309

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is only valid when the switch of PFC process is enabled
Relationship
in the BSC.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.7 Max times of Bvc block retry


Full Name Max times of Bvc block retry

Abbreviation BVCBlkMax

Managed Object BSS Function PS

3GPP Name BVC-BLOCK-RETRIES

3GPP Reference 3GPP TS48.018

If the PTP BVC must be blocked due to OAM intervention or equipment


faults (disable blocking/unblocking the signaling BVC), BSS will first set
the BVC status as Blocked and discard the uplink service data.
To notify SGSN to stop sending downlink data, BSS initiates BVC
blocking procedure. BSC repeats BVC blocking procedure after sending
BVC BLOCK message to SGSN. If BSC fails to receive BVC BLOCK
ACKNOWLEDGE message from SGSN in BSSGPT1, then BVC
blocking repeats for a maximum of N times.
BSC stops BVC blocking and notifies OMS for N times if there is no
Description answer. N depends on maximum retries of BVC BLOCK.

Instance BSC

Value Range and Step 3..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

2-310

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.8 Max times of Bvc unblock retry


Full Name Max times of Bvc unblock retry

Abbreviation BVCUblkMax

Managed Object BSS Function PS

3GPP Name BVC-UNBLOCK-RETRIES

3GPP Reference 3GPP TS48.018

If the PTP BVC must be unblocked due to the OAM intervention


or recovery of the equipment fault (disable blocking/unblocking the
signaling BVC), BSS will first set the BVC status as Unblocked.
To notify SGSN to start sending the downlink data, BSS will initiate the
BVC unblocking procedure. BSC repeats the BVC unblocking procedure
after sending the BVC UNBLOCK message to SGSN. If BSC fails to
receive the BVC UNBLOCK ACKNOWLEDGE message from SGSN in
BSSGPT1 then BVC unblocking repeats for a maximum of N times.
BSC stops BVC unblocking and notifies OMS for N times if there is no
Description answer. N depends on maximum retries of BVC UNBLOCK.

Instance BSC

2-311

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 3..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.9 MAX times of Bvc reset retry


Full Name MAX times of Bvc reset retry

Abbreviation BVCRestMax

Managed Object BSS Function PS

3GPP Name BVC-RESET-RETRIES

3GPP Reference 3GPP TS48.018

2-312

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

To keep the initial status consistent between the two BVC sides, the
Reset BVC process must be initiated in the following cases:
For faults that affect NSE, BSC initiates Signaling BVC RESET
procedure. For faults that affect a single BVC, BSC initiates the PTP
BVC RESET procedure. BSC initiates all PTP BVC RESET procedure
for corresponding NSE after a signaling BVC reset procedure.
BSC repeats the BVC RESET procedure after sending BVC
RESET message to SGSN and if BSC fails to receive BVC RESET
ACKNOWLEDGE
message from SGSN in BSSGPT2. The BVC RESET process could be
repeated for N times at most. If there is no answer after the N times,
BSC stops BVC RESET and notifies OMS. N depends on maximum
Description retries of BVC RESET.

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 6

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-313

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.6.10 Max times of suspend retry


Full Name Max times of suspend retry

Abbreviation suspendMax

Managed Object BSS Function PS

3GPP Name SUSPEND-RETRIES

3GPP Reference 3GPP TS48.018

MS first sends a SUSPEND message to BSS over SDCCH when a


Class B GPRS MS is about to initiate a voice service. BSS initiates
suspending procedure to SGSN to notify SGSN to stop sending PS
paging and downlink packet data after BSS receives the message.
BSC repeats suspending procedure after sending SUSPEND message
to SGSN. If BSC fails to receive SUSPEND ACK/NACK message from
SGSN in BSSGPT3 then BSC repeats the suspending procedure for a
maximum of N times.
BSC stops suspending and notify OMS for N times if there is no answer.
Description N depends on the maximum number of suspending retries.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters ResumeSetOpt

This parameter is only valid when the switch of SUSPEND/RESUME


Relationship
process is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

2-314

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.11 Max times of resume retry


Full Name Max times of resume retry

Abbreviation resumeMax

Managed Object BSS Function PS

3GPP Name RESUME-RETRIES

3GPP Reference 3GPP TS48.018

This parameter is a BSSGP layer parameter. When GPRS-attached MS


leaves a special mode, BSS adopts one of the following strategies:
Notify MS of carrying out "route area upgrade".
Notify SGSN of recovering the GPRS service.
In case of Routing Area Update, MS and SGSN directly negotiate GMM
status. With the Resume method (usually for the MS in the packet
transmission status), BSS will initiate the RESUME process to SGSN
for the purpose of notifying SGSN to start the normal packet downlink
transmission action. If BSC fails to receive the RESUME ACK/NACK
message from SGSN in BSSGPT4, then repeats Resume procedure
for a maximum of N times.
BSC stops the Resume procedure and notify OMS N times if there is no
Description answer. N depends on the parameter ResumeMax.

Instance BSC

Value Range and Step 0..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

Set the parameter in consideration of the default


Configuration Rule and value, the link stability at Gb interface, and the round trip delay
Adjustment Suggestion at Gb interface. The default value is recommended when Gb interface
is normal.

Change Mode Offline

Related features N/A

Related Parameters ResumeSetOpt

2-315

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is only valid when the switch of SUSPEND/RESUME


Relationship
process is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.12 Max allowed number of continous losses of uplink data


blocks(N3101)
Full Name Max allowed number of continous losses of uplink data blocks(N3101)

Abbreviation N3101

Managed Object BSS Function PS

3GPP Name N3101

3GPP Reference 3GPP TS44.060

When the network after setting USF, receives a valid data block from the
mobile station in a block assigned for this USF, it will reset counter N3101.
The network will increment counter N3101 for each USF for which no data
is received. N3101max shall be greater than 8. If N3101 = N3101max,
the network shall stop the scheduling of RLC/MAC blocks from the mobile
Description station for this USF and start timer T3169.

Instance BSC

Value Range and Step 9..255

Unit N/A

Default Value 50

Default Value cut down "abnormal release number of uplink TBF by N3101 overflow",
Configuration Reason improve the KPI

2-316

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The smaller this parameter is, the lower the tolerbility the network side for
the improper uplink, the higher the possibility of the uplink TBF released
improperly. When this parameter is set to a larger value, if the network
side cannot receive corresponding uplink data blocks caused by the MS
itself, the network side still allocates uplink resources for the MS, which
leads to a waste of system resources. During PS basic measurement,
Configuration Rule and
"abnormal release number of uplink TBF by N3101 overflow" records
Adjustment Suggestion
that the uplink TBF improperly released is always due to poor link quality
on the Abis interface, poor air interface quality, unreasonable network
coverage, and the behaviour of the MS itself (such as cell reselection).
In addition, users can appropriately add the overflow threshold of N3101,
to reduce "abnormal release number of uplink TBF by N3101 overflow" ,
and to improve the network quality to some extent.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.13 Times of packet uplink ACK/NACK retries(N3103)


Full Name Times of packet uplink ACK/NACK retries(N3103)

Abbreviation N3103

Managed Object BSS Function PS

3GPP Name N3103

3GPP Reference 3GPP TS44.060

2-317

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is the counter N3103, which is a RLC/MAC layer


parameter in the Packet Control Unit (PCU). The counter N3103 counts
the number of Packet Uplink ACK/NACK retry attempts.
In the process of packet uplink transmission, if the network detects that
the TBF is completed (CV=0, and V(Q)=V(R)), and has received all
RLC data blocks, the network should send a Packet Uplink ACK/NACK
message, set the Final ACK Indicator (FAI) to 1, adds a legal RRBP field
in the header of the RLC/MAC control block, and clears the counter
N3103.
If the MS receives the PACKET UPLINK ACK/NACK message (FAI=1)
from the network, the MS should send the PACKET CONTROL ACK
message on the block specified by the RRBP and releases the TBF.
If the network does not receive the PACKET CONTROL ACK message
on the block specified by the RRBP, the counter N3103 is increased by 1
and the PACKET UPLINK ACK/NACK message is retransmitted.
If the value of counter N3103 exceeds the limit specified by the
parameter N3103max, the network starts the timer T3169. Upon timeout
Description of T3169, the network can use the TFI and USF resources again.

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 10

cut down "abnormal release number of uplink TBF by N3103 overflow"


Default Value
to improve KPI and the value should not be too large because N3103 is
Configuration Reason
TBF release counter.

the lower the value, the higher the number of uplink TBF abnormal
release by N3103;the higher the value, the more the network resources
Configuration Rule and are wasted when cell reselection, but the higher the network KPI.In live
Adjustment Suggestion network, N3103 should be properly increased to cut down the number of
uplink TBF abnormal release by N3103 according to the Um interface
Abis link qualityMS own action, etc.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-318

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.14 Max allowed number of continuous losses of uplink


RLC/MAC control message(N3105)
Max allowed number of continuous losses of uplink RLC/MAC control
Full Name message(N3105)

Abbreviation N3105

Managed Object BSS Function PS

3GPP Name N3105

3GPP Reference 3GPP TS44.060

When the network after sending a RRBP field in the downlink RLC
data block or in Iu mode also RLC/MAC control block, receives a valid
RLC/MAC control message from the mobile station, it will reset counter
N3105. The network will increment counter N3105 for each allocated
data block for which no RLC/MAC control message is received for this
Description TBF. The value of N3105max is network dependent.

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 15

Default Value cut down "abnormal release number of downlink TBF by N3105
Configuration Reason overflow", improve the KPI

the lower the value, the higher the number of downlink TBF abnormal
release by N3105;the higher the value, the more the network resources
Configuration Rule and are wasted when cell reselection, but the higher the network KPI.In live
Adjustment Suggestion network, N3105 should be properly increased to cut down the number of
uplink TBF abnormal release by N3105 according to the Um interface
Abis link qualityMS own action, etc.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-319

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.15 Bvc flow control support


Full Name Bvc flow control support

Abbreviation BVCFlowCtrl

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

BVC flow control occurs at Gb interface between SGSN and BSS,


and only in downlinks. BSS provides control parameters and SGSN
executes, in order to avoid one BVC on BSS to abandoning some LLC
data because of the overtime caused by grouping channel is too busy
(too many LLC frame caches) and to avoid abandoning new downlink
LLC data because of limit of memory resource (overflow of LLC frame
caches).
BSSGP process at BSS side counts current leaking rate of BVC
periodically (including short statistics and long statistics). If the long
statistics timer overflows, this parameter unconditionally initiates the
BVC flow control process; if the discrepant range of adjacent leaking
rates is over CellFcThs, acknowledgement by SGSN is required. If
the short statistics timer overflows and if discrepant range of adjacent
leaking rates is over CellFcThs, this parameter initiates the BVC flow
Description control process, and acknowledgement by SGSN is required.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

2-320

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 1

Default Value
Configuration Reason Gb Interface flow control

The cell flow control is enabled at the Gb


Configuration Rule and interface by default. Enable or disable the BVC flow control in
Adjustment Suggestion consideration
of the flow control algorithm used in the core network.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.16 MS flow control support


Full Name MS flow control support

Abbreviation MSFlowCtrl

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

2-321

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

MS flow control occurs at Gb interface between SGSN and BSS, and only
in downlinks. BSS provides control parameters and SGSN executes,
to avoid one MS on BSS to abandoning some LLC data because of the
overtime caused by grouping channel is too busy (too many LLC frame
caches) and to avoid abandoning new downlink LLC data because of
limit of memory resource (overflow of LLC frame caches).
The BSSGP process at the BSS side periodically measures the current
leakage ratio of MS. When the statistic timer overflows, the MS Flow
Description Control process is initiated unconditionally.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason Gb Interface flow control

Enable or disable the MS flow control in consideration


Configuration Rule and
of the cell flow control granularity and the MS flow control support
Adjustment Suggestion
in the CN.

Change Mode Offline

Related features ZGB-03-05-017 MS Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.17 Bvc flow control R MIN value


Full Name Bvc flow control R MIN value

2-322

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation BVCFlowCtrlRMin

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

This is the minimum value of leaking rate R in reported BVC flow control
parameters under all kinds of flow control mode, that is, the reported pa-
Description rameter R must be equal or over the set value, in the unit of 100 bps.

Instance BSC

Value Range and Step 10..1000

Unit N/A

Default Value 300

Default Value
Configuration Reason Depends on the Min theoretical speed per GPRS PDCH

The parameter value depends on the flow control


of the CN. If the actual rate impacts the transmission of downlink
Configuration Rule and
data when the default value is used, increase the parameter value
Adjustment Suggestion
in the case of uncontinuous transmission or decrease the parameter
value in the case of too fast transmission.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

This parameter is valid when the flow control


Relationship
switch is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-323

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.6.18 MS flow control R MIN value


Full Name MS flow control R MIN value

Abbreviation MSFlowCtrlRMin

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

This is the minimum value of leaking rate R in reported MS flow control


parameters under all kinds of flow control mode, that is, the reported pa-
Description rameter R must be equal or over the set value, in the unit of 100 bps.

Instance BSC

Value Range and Step 10..1000

Unit N/A

Default Value 300

Default Value
Configuration Reason Depends on the Min theoretical speed per GPRS PDCH

The parameter value depends on the flow control


of the CN. If the actual rate impacts the transmission of downlink
Configuration Rule and
data when the default value is used, increase the parameter value
Adjustment Suggestion
in the case of uncontinuous transmission or decrease the parameter
value in the case of too fast transmission.

Change Mode Offline

Related features ZGB-03-05-017 MS Flow Control (in DL)

Related Parameters MSFlowCtrl

This parameter is valid when the flow control


Relationship
switch is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-324

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.6.19 Flow control mode


Full Name Flow control mode

Abbreviation FlowCtrlMode

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

BSC has different flow control modes to report flow control parameters
to SGSN. The modes are as follows:
1: Mode 1: Report flow control parameters according to actual traffic
on radio interface counted at BSC;
2: Mode 2: Report flow control parameters according to max traffic that
the cell can provide;
3: Mode 3: Reserved
"Flow control mode 1 parameter" is enabled if selecting "mode 1"; "Flow
Description control mode 2 parameter" is enabled if selecting "mode 2".

Instance BSC

Value Range and Step 1..3

Unit N/A

Default Value 3

Default Value
Configuration Reason leak rate caculate by real Um speed

Take the equipment actually used in the CN


when setting the parameter value. Select Mode 1 for ERICSSON SGSN.
Configuration Rule and
Select Mode 2 for HUWWEI equipment. And select Mode 3 when both
Adjustment Suggestion
ERICSSON
and HUAWEI equipment are used.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-325

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.20 PFC support


Full Name PFC support

Abbreviation PFCSupport

Managed Object BSS Function PS

3GPP Name PFC

3GPP Reference 3GPP TS48.018

This parameter is broadcast through SI13, PSI1, and PSI13 messages.


In EGPRS system with broadband features, the QoS concept of UMTS
has been imported, which enables transferring the negotiable QoS
configuration to BSS through Gb interface.
BSS can maintain QoS subscribing information through function PFC
(packet flow context) flow, which include acquiring QoS, modifying
QoS, and deleting QoS signaling flow. Network notifies MS if the
network supports PFC flow through the system message parameter
PFC_FEATURE_MODE. If yes, the MS will add PFI when establishing
uplink TBF (PACKET RESOURCE REQUEST). BSS can decide QoS
Description as MS requires according to PFI.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Consider service type and CN's implementation

To enable or disable the PFC function, adjust


Configuration Rule and
the status of this switch in consideration of the adjustment at the
Adjustment Suggestion
CN side at the same time.

Change Mode Offline

2-326

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.21 Net operation mode


Full Name Net operation mode

Abbreviation NMO

Managed Object BSS Function PS

3GPP Name NMO

3GPP Reference 3GPP TS44.060

There are three network operation modes:


Network Operation Mode 1: The network sends to the "GPRS-attached"
MS the CS paging message on the same channel of GPRS paging
channel (packet or CCCH paging channel), or on the GPRS traffic
channel (when it is assigned with a packet data channel). Mode 1
indicates that MS only need to monitor one paging channel.
Network operation mode 1 is required while configuring PBCCH; Gs
interface is required while configuring network operation mode 1.
Network Operation Mode 2: The network sends to the GPRS-attached
MS the CS paging message on the CCCH paging channel, which is also
for GPRS paging. Mode 2 indicates that the MS only need to monitor
CCCH paging channel, but when BSC allocates a packet data channel,
the CS paging message uses the CCCH paging channel.
Network Operation Mode 3: The network sends to the "GPRS-attached"
MS the CS paging message on the CCCH paging channel, and sends

Description the GPRS paging message either on the packet paging channel (if there

2-327

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

is any in the cell) or on the CCCH paging channel. Mode 3 indicates that
the MS must monitor two paging channels (if packet paging channel is
available in the cell) in order to receive CS or GPRS paging message.

Instance BSC

0: Net operation mode 1


1: Net operation mode 2
Value Range and Step 2: Net operation mode 3

Unit N/A

Default Value 1

Default Value Depends On the configuration of PBCCH, Gb Interface and Gs Interface


Configuration Reason at CN

If PBCCH is configured at Gs interface, select


Network operation mode 1. If neither Gs interface nor PBCCH exists
Configuration Rule and in the network, select Network operation mode 2. If no Gs interface
Adjustment Suggestion exists in the network, but PBCCH is configured, Network operation
mode 3 can be selected. In this network operation mode, the MS needs
to listen the packet paging channel and the CCCH paging channel.

Change Mode Offline

Related features ZGB-03-05-009 Network Mode of Operation (NMO) 1~3

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.22 Page coordination support


Full Name Page coordination support

Abbreviation PagCoordination

Managed Object BSS Function PS

2-328

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name BSS_PAGING_COORDINATION

3GPP Reference 3GPP TS44.060

This parameter determines if intra-BSC cell supports CS page


coordination. This parameter is broadcast in GPRS CELL OPTIONS
through SI13, PSI1, and PSI13 messages. It is invalid when the NMO
value is 1.
Page coordination means that CS service paging can be sent to a
subscriber on the PS service channel PACCH when the MS is in the PS
Description transmission state.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Depends on GPRS Support Configuration

Enable this function if CS paging needs to


be processed by the MS in PS transmission state. Take the possibility
Configuration Rule and of PS service drop into account when enabling the function. Disable
Adjustment Suggestion this function if the drop of PS service may occur due to CS paging
processing. When this function is disabled, CS paging will not be
processed when the MS is in PS transmission state.

Change Mode Offline

Related features ZGO-02-01-001 Paging Coordination

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-329

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.6.23 NACC support


Full Name NACC support

Abbreviation NACCSupport

Managed Object BSS Function PS

3GPP Name NACC

3GPP Reference 3GPP TS 44.060

This parameter indicates whether Network Assisted Cell Change(NACC)


is enabled.
For the MS, NACC is part of the GERAN Feature Package 1. The
function includes:
1. The MS in PS transmission state can receive the system messages
required for accessing the new cell.
2. The MS notifies the network (CCN mode) when deciding to perform a
cell reselection.
Therefore, NACC needs to be used together with CCN mode.
For the network, the NACC function includes:
1. After MS performs cell reselection, the network sends the system
messages of neighbor cells of the new cell on the PACCH.
2. After receiving the cell change information from the MS, the network
sends to the MS the system messages of recommended neighbor cells
or other neighbor cells.
When NACC is used together with CCN, Packet (P)SI Status functions,
Description the cell reselection time can be reduced.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

It is recommended to enable the NACC function


to shorten the interval between cell reselections, relieve the influenced
Configuration Rule and
on packet services being processed, and thus increase the packet
Adjustment Suggestion
service
rate.

Change Mode Offline

Related features ZGO-02-02-010 Network-assisted Cell Change

2-330

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters CCNActive


SIStatusInd
CCNSupport

CCNActive, SIStatusInd, and CCNSupport must be enabled at the same


Relationship
time.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.24 LLC Transfer for SAPI0(Reserved)


Full Name LLC Transfer for SAPI0(Reserved)

Abbreviation LLCTranSAPI0

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI0 (Reserved) services. Generally, this function is not
enabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

2-331

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.25 LLC Transfer for SAPI1(LLGMM)


Full Name LLC Transfer for SAPI1(LLGMM)

Abbreviation LLCTranSAPI1

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI1 (LLGMM) services. Generally, this function is not
enabled for the GMM signaling. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

2-332

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.26 LLC Transfer for SAPI2(TOM2)


Full Name LLC Transfer for SAPI2(TOM2)

Abbreviation LLCTranSAPI2

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

2-333

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI2 (TOM2) services. Generally, this function is not
enabled for TOM2 services. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.27 LLC Transfer for SAPI3(User-Data)


Full Name LLC Transfer for SAPI3(User-Data)

2-334

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation LLCTranSAPI3

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI3 (User-Data) services. Generally, this function is
enabled for user data. The purpose of this function is to transfer the LLC
frames from the source cell cache to the target cell when an MS performs
cell reselection. This can ensure the continuity of downlink data after cell
Description reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

2-335

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.6.28 LLC Transfer for SAPI4(Reserved)


Full Name LLC Transfer for SAPI4(Reserved)

Abbreviation LLCTranSAPI4

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI4 (Reserved) services. Generally, this function is not
enabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

2-336

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.29 LLC Transfer for SAPI5(User-Data)


Full Name LLC Transfer for SAPI5(User-Data)

Abbreviation LLCTranSAPI5

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI5 (User-Data) services. Generally, this function is
enabled for user data. The purpose of this function is to transfer the LLC
frames from the source cell cache to the target cell when an MS performs
cell reselection. This can ensure the continuity of downlink data after cell
Description reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-337

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.30 LLC Transfer for SAPI6(Reserved)


Full Name LLC Transfer for SAPI6(Reserved)

Abbreviation LLCTranSAPI6

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI6 (Reserve) services. Generally, this function is not
enabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

2-338

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.31 LLC Transfer for SAPI7(LLSMS)


Full Name LLC Transfer for SAPI7(LLSMS)

Abbreviation LLCTranSAPI7

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI7 (LLSMS) services. Generally, this function is not
enabled for LLSMS services. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

2-339

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.32 LLC Transfer for SAPI8(TOM8)


Full Name LLC Transfer for SAPI8(TOM8)

Abbreviation LLCTranSAPI8

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

2-340

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI8(TOM8) services. Generally, this function is not en-
abled for TOM8 services. The purpose of this function is to transfer the
LLC frames from the source cell cache to the target cell when an MS per-
forms cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.33 LLC Transfer for SAPI9(User-Data)


Full Name LLC Transfer for SAPI9(User-Data)

2-341

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation LLCTranSAPI9

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI9 (User-Data) services. Generally, this function is
enabled for user data. The purpose of this function is to transfer the LLC
frames from the source cell cache to the target cell when an MS performs
cell reselection. This can ensure the continuity of downlink data after cell
Description reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

2-342

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.6.34 LLC Transfer for SAPI10(Reserved)


Full Name LLC Transfer for SAPI10(Reserved)

Abbreviation LLCTranSAPI10

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI10 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

2-343

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.35 LLC Transfer for SAPI11(User-Data)


Full Name LLC Transfer for SAPI11(User-Data)

Abbreviation LLCTranSAPI11

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI11 (User-Data) services. Generally, this function is
enabled for user data. The purpose of this function is to transfer the LLC
frames from the source cell cache to the target cell when an MS performs
cell reselection. This can ensure the continuity of downlink data after cell
Description reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-344

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.36 LLC Transfer for SAPI12(Reserved)


Full Name LLC Transfer for SAPI12(Reserved)

Abbreviation LLCTranSAPI12

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI12 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

2-345

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.37 LLC Transfer for SAPI13(Reserved)


Full Name LLC Transfer for SAPI13(Reserved)

Abbreviation LLCTranSAPI13

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI13 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

2-346

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.38 LLC Transfer for SAPI14(Reserved)


Full Name LLC Transfer for SAPI14(Reserved)

Abbreviation LLCTranSAPI14

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

2-347

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI14 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.39 LLC Transfer for SAPI15(Reserved)


Full Name LLC Transfer for SAPI15(Reserved)

2-348

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation LLCTranSAPI15

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the BSC supports the LLC frame trans-
fer function for SAPI15 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description after cell reselection.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is


recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer
Configuration Rule and
and re-transmission, and the signaling frame length is comparatively
Adjustment Suggestion
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

2-349

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.6.40 RIM support


Full Name RIM support

Abbreviation RIMSupport

Managed Object BSS Function PS

3GPP Name RIM

3GPP Reference 3GPP TS 44018

This parameter indicates whether the RIM function is enabled.


The RIM function refers to the quick reselection between BSCs or
between BSC and RNC. In BSC external Network Assisted Cell Change
(NACC), to accelerate the speed to access a new cell during cell
reselection for the MS, BSC sends the new cell system messages to the
MS when it is in source cell before the cell reselection. This reduces the
time for listening to complete system messages after the MS reselects
the new cell.
To obtain system messages of a cell out of the BSC, the external NACC
needs the RAN Information Management (RIM) process between SGSN
and BSC.
When an BSC supports the RIM function, service triggers BSC to obtain,
store and update the system messages of external cell through the RIM
process. Accordingly, when the RIM function is supported, the BSC
also needs to provide the system messages of its cells and notifies the
message changes to corresponding BSCs/RNCs, if requested by other
Description BSCs/RNCs.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

Enable this switch when the external NACC function


is enabled. After the switch is enabled, an RIM process can be initiated
Configuration Rule and
between the SGSN and the BSC to get the system information of a cell
Adjustment Suggestion
outside the BSC. In this way, the MS can get access to the target
cell more quickly during a cell reselection.

2-350

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC

Related Parameters N/A

The parameter RIMRetryTimes is valid only when


Relationship
this switch is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.41 RIM retry times


Full Name RIM retry times

Abbreviation RIMRetryTimes

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS 43.055

This parameter indicates the number of RIM retries. The maximum num-
Description ber of RIM retries is 3.

Instance BSC

Value Range and Step 0..3

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Set this parameter for external NACC when the


Configuration Rule and
RIM function is enabled. It is recommended to disable the RIM function
Adjustment Suggestion
because it requires the support of the CN.

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC

2-351

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters DTMSupport

This parameter can be set only when the RIM


Relationship
function is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.42 TBF establish support


Full Name TBF establish support

Abbreviation TBF_EST

Managed Object BSS Function PS

3GPP Name TBF_EST

3GPP Reference 3GPP TS 43.055

This parameter determines whether BSC supports TBF establishment


process. TBF flow establishment refers to while releasing uplink TBF,
to determine if new uplink TBF shall be established immediately for
Description CTRL_ACK field in Packet Control Acknowledgement message.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason Consider some MS do not support this function

When this function is enabled, the MS can find


whether data transmission is still needed from the last uplink block
Configuration Rule and
in the released uplink TBF. If data transmission is needed, the MS
Adjustment Suggestion
can immediately re-establish an uplink TBF. Enable or disable this
function according to the support capability of individual MSs.

2-352

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters DTMHandoverSupp

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.43 Signal extended uplink TBF support


Full Name Signal extended uplink TBF support

Abbreviation SIGNAL_EUTBF

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates whether the extended uplink TBF is supported


for a signalling TBF. This switch is valid when the switch of extended up-
link TBF is enabled. The signaling TBF refers to a TBF established for
Description transmitting GMM signalling.

Instance BSC

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason consider MS Capability and Radio Quality

2-353

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Set this parameter according to the need of


using the extended uplink TBF with the consideration of the actual
Configuration Rule and transmission status of signalling TBF data because the signalling
Adjustment Suggestion TBF process is generally completed in a short time. It is recommended
to enable this switch in a network that is sensitive for the test
of download rate performance.

Change Mode Offline

Related features ZGB-03-05-014 Delayed TBF Release in UL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.44 Highest coding scheme of POC service in GPRS


Full Name Highest coding scheme of POC service in GPRS

Abbreviation pocAttSeltG

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates the highest-order encoding mode that can be


Description used for POC service by a GPRS-attached MS.

Instance BSC

0: CS1(CS1)
1: CS2(CS2)
2: CS3(CS3)
Value Range and Step 3: CS4(CS4)

Unit N/A

Default Value 2

2-354

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason For reliable signal data transferring and data speed

Set the highest order encoding mode according


Configuration Rule and
to the radio quality in the network on the condition that the stability
Adjustment Suggestion
of POS transmission is ensured.

Change Mode Offline

Related features N/A

Related Parameters PocSupport

This parameter is valid when the switch of


Relationship
POS service support is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.45 Highest coding scheme of POC service in EGPRS


Full Name Highest coding scheme of POC service in EGPRS

Abbreviation pocAttSeltE

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates the highest-order encoding mode that can be


Description used for POC service by an EGPRS-attached MS.

Instance BSC

2-355

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
Value Range and Step 12: MCS9

Unit N/A

Default Value 9

Default Value
Configuration Reason For reliable signal data transferring and data speed

Set the highest order encoding mode according


Configuration Rule and
to the radio quality in the network on the condition that the stability
Adjustment Suggestion
of POS transmission is ensured.

Change Mode Offline

Related features N/A

Related Parameters PocSupport

This parameter is valid when the switch of


Relationship
POS service support is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.46 Highest coding scheme of signal TBF


Full Name Highest coding scheme of signal TBF

Abbreviation SigTBFMaxCode

Managed Object BSS Function PS

2-356

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name None

3GPP Reference N/A

This parameter limits the highest encoding mode of signallings in the case
of upper-layer signalling transmission, for example, the transmission of
Description PDP activation and routing area update signallings.

Instance BSC

4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
Value Range and Step 12: MCS9

Unit N/A

Default Value 9

Default Value
Configuration Reason For reliable signal data transferring

The highest coding scheme of signalling TBF and the signalling data's
Configuration Rule and stable transmission over the air interface are subject to the network radio
Adjustment Suggestion quality. For the network that is relatively sensitive to the higher coding
scheme, it is recommedned to set the value as MCS7~MCS9 as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-357

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.6.47 Support of enhanced radio status procedures


Full Name Support of enhanced radio status procedures

Abbreviation EnRadioStu

Managed Object BSS Function PS

3GPP Name Enhanced Radio Status feature

3GPP Reference N/A

On the basis of Radio Status, enhanced Radio Status reports three


more cause values:
x02: indicates the enhanced Radio Status process is used when the cell
reselection occurs. Usually, it helps satisfy the service requirement to
the maximum extent.
x03: indicates the enhanced Radio Status process is used when the
MS is required to perform cell reselection and LLC frame transfer is
not supported.
x04: indicates that SGSN is notified when BSC detects cell
reselection failure.
SGSN has the following responses:
When Radio Status with the cause value x02 is received, the
downlink LLC frame sending is resumed after cell reselection is
completed.
When Radio Status with the cause value x03 is received, either
the downlink data sending is resumed after cell reselection is completed,
or Radio Status with other cause values are received.
When Radio Status with the cause value x04 is received, if
there are data to be sent to MS, then the downlink LLC frame sending
is resumed.
With Radio Status that supports multiple cause values, SGSN
can better understand the status of MS, which avoids sending data
Description to the old cell blindly.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

2-358

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When the negotiation of enhanced Radio Status


with the SGSN is enabled, downlink data can be suspended and
Configuration Rule and resumed
Adjustment Suggestion in time before and after a cell reselection, which improves the network
quality. It is recommended to enable the negotiation function at the
BSC side after this function is enabled at the SGSN side.

Change Mode Offline

Related features N/A

Related Parameters N/A

This functional switch is valid only when the RadioStatus send switch in
Relationship
GBMsgSndInd is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.48 Support of PFC flow control procedures


Full Name Support of PFC flow control procedures

Abbreviation PFCFlowCtrl

Managed Object BSS Function PS

3GPP Name PFC-FC

3GPP Reference N/A

2-359

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

PFC flow control occurs at Gb interface between SGSN and BSS, and
only in downlink. BSS provides control parameters and SGSN executes.
It helps avoid a PFC in BSS discarding some LLC data due to timeout
caused by grouping channels being too busy (too many LLC frame
buffers) and avoid discarding new downlink LLC data due to limited
memory resource (overflow of LLC frame buffer).
The BSSGP process at the BSS side periodically measures the current
leakage ratio of MS. When the statistic timer overflows, the 'PFC Flow
Control' process is initiated unconditionally.
Description This parameter is supported from version 6.20.21.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Depends on the support of PFC between CN and BSS

To enable or disable the PFC flow control function,


Configuration Rule and
adjust the status of this switch in consideration of the adjustment
Adjustment Suggestion
at the CN side at the same time.

Change Mode Offline

Related features ZGB-03-05-017 MS Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.49 PS handover support


Full Name PS handover support

2-360

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation psHoSupport

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

Description This parameter determine whether PS handover is supported.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value The function is not completed accomplished in the version and is
Configuration Reason disabled.

Configuration Rule and This function is not completely accomplished in this version and thus
Adjustment Suggestion recommended to be disabled.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.50 Max of sending PS handover required


Full Name Max of sending PS handover required

Abbreviation psHoReqMaxNum

Managed Object BSS Function PS

3GPP Name N/A

2-361

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 48.018

This parameter represents the maximum number of sending the PS Han-


dover Required message during PS handover. The message is sent again
Description after expire of T12PsHo timer.

Instance BSC

Value Range and Step 1..6

Unit N/A

Default Value 2

Default Value
Configuration Reason the experience value of inter-process between two network elements

The default value is recommended. The parameters


Configuration Rule and
relevant to PS handover, including this parameter, are not in commercial
Adjustment Suggestion
use currently.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.51
Enable PS Handover Indications in Inter-BSS
handover
Enable PS Handover Indications in Inter-BSS
Full Name handover

Abbreviation enablePSHoIndi

2-362

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference 3GPP TS 48.018

This parameter specifies whether PS Handover Indications is contained


Description in the PS handover message.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value The default is enabled, which can reduce the PS handover time between
Configuration Reason BSSs.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.52 Request SI/PSI


Full Name Request SI/PSI

Abbreviation enableRequestPSI

Managed Object BSS Function PS

3GPP Name N/A

2-363

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 48.018

This parameter determines whether the PS Handover message contains


Description the request for BSC to respond for the SI/PSI information.

Instance BSC

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason It is enabled by default, to reduce PS handover duration.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.53 Service UTRAN CCO support


Full Name Service UTRAN CCO support

Abbreviation PSUTRANCCOSupp

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

2-364

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It describes whether 2G/3G priority selection control is supported during


PS handover or reselection.
The SGSN can add the Service UTRAN CCO information in such
messages as PS Handover Request, Create BSS PFC, or DL UnitData
PDU to indicate for the BSC whether 3G is preferred, not preferred, or
Description forbidden during PS handover and reselection.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This parameter is not in use currently. CCOStrategy


Adjustment Suggestion can also be used for 2G/3G priority control.

Change Mode Offline

Related features N/A

Related Parameters N/A

CCOStrategy, equivalent to this parameter, can also be used for 2G/3G


Relationship
priority control.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.54 FANR in TBF support


Full Name FANR in TBF support

Abbreviation TBFFanrSupport

Managed Object BSS Function PS

3GPP Name N/A

2-365

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates whether the BSC supports fast ACK/NACK re-
porting (FANR) function. If both the network and MS support this function,
the MS can add the DL radio block reception information in the UL radio
block, and the network can add the UL radio block reception information
in the DL radio block. In this way, the MS and network can be informed
timely of the reception of UL and DL radio blocks, thus quickening the
Description re-transmission of UL and DL radio blocks that are not properly received.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason This function is newly added in the protocol and is not enabled by default.

Configuration Rule and Enable this function if the FANR function is required on site. Otherwise,
Adjustment Suggestion disable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.55 DLDC support


Full Name DLDC support

Abbreviation DLDCSupport

Managed Object BSS Function PS

2-366

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the downlink dual-carrier function is


supported.
This is one of the EDGE evolution functions. If this function is enabled,
the GERAN carriers of two independent frequency points (or different
MAIO values in the case of frequency hopping) can be received by the
same terminal. This function is developed on the basis of multi-timeslot
technology, and the difference between them is that multi-timeslot
Description allocation can span multiple carriers.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.56 RTTI support


Full Name RTTI support

2-367

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation RTTISupport

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the Reduced Transmission Time


Interval (RTTI) function is supported.
RTTI is a concept relative to BTTI. Basic Transmission Time Interval
(BTTI) means that four consecutive Bursts are used on a channel to
transmit a radio block, and it takes 20 ms to transmit a radio block. For
RTTI, two consecutive Bursts on two channels (PDCH-pair) respectively
Description are used, and it takes only 10 ms to transmit a radio block.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-368

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.6.57 EGPRS2-A support


Full Name EGPRS2-A support

Abbreviation EGPRS2_ASupp

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether EGPRS2-A is supported.


EGPRS2-A is the phase-I implementation of EGPRS2. In this phase,
16QAM, 32QAM, and Turbo code are used, QPSK and 1.2-multiple
symbol rate are not used. Also, DAS and UAS modulation coding
Description scheme are used.

Instance BSC

Value Range and Step 0: Not Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

The parameter EGPRS2AInitAttSelt_0 is valid only when this switch


Relationship
is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2-369

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.6.58 EGPRS prior to GPRS Support


Full Name EGPRS prior to GPRS Support

Abbreviation EGPRSAllocPri

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates whether to support EGPRS prior to GPRS.


After this function is enabled, in case EGPRS and GPRS share channel,
the system adjusts the number of allocated blocks for EGPRS and
Description GPRS according to the allocating weight of EGPRS.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

If this switch is enabled, the number of blocks


allocated to EGPRS and GPRS services is adjusted according to the
Configuration Rule and
weight of EGPRS when EGPRS and GPRS services share the same
Adjustment Suggestion
channel.
Enable or disable this switch depending on the requirement on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

If this function is supported, the number of blocks allocated to EGPRS


Relationship and GPRS services is adjusted according to the weight of EGPRS when
EGPRS and GPRS services share the same channel.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

2-370

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.6.59 Allocating weights of EGPRS


Full Name Allocating weights of EGPRS

Abbreviation EGPRSAllocW

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the allocating weights of EGPRS. When the


EGPRS prior to GPRS function is supported, the system adjusts the
number of blocks allocated to EGPRS and GPRS according to this
allocating weight.
If the value is 0, EGPRS service fails to get blocks. If the value is 100,
Description GPRS service fails to get blocks.

Instance BSC

Value Range and Step 0..100

Unit N/A

Default Value 60

Default Value
Configuration Reason consider speed of EDGE and GPRS in BSC

If a channel is shared by EDGE and GPRS users,


increasing the parameter value results in more radio blocks allocated
Configuration Rule and to EDGE users and higher rate. Similarly, decreasing the parameter
Adjustment Suggestion value results in less radio blocks allocated to EDGE users and lower
rate. This parameter is effective on both dynamic and static data
services.

Change Mode Offline

Related features N/A

Related Parameters N/A

This parameter is only valid when Info_4_6


Relationship is enabled. When Info_4_6 and Info1_7_5 are enabled at the same time,
Info1_7_6 takes effect prior to this parameter.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-371

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.60 Choose PS route by NSVC


Full Name Choose PS route by NSVC

Abbreviation PSRouteByNSVC

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to choose PS route by NSVC. It is


meaningful only when multiple IPGB boards exist on site.
If BSC supports choosing route by NSVC, an IPGB board can send
NS-ALIVE message through itself and thus individually detects its NSVC
status. At the same time, the user plane selects the NSVC in normal
route status to provide service. If BSC does not support choosing route
through NSVC, the IPGB board sends the NS-ALIVE message through
another board and thus does not individually detect the route status of
Description NSVC.

Instance BSC

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enable this function when the following conditions


Configuration Rule and are met: load sharing is adopted at Gb interface; the BSC is configured
Adjustment Suggestion with multiple IPGB boards, each connecting to a router or switch;
and the SGSN has only one remote destination IP address.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-372

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.61 Enable PS Uplink Power Control In Establishment Phase


Full Name Enable PS Uplink Power Control In Establishment Phase

Abbreviation PSUlPwrCtlInEsta

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the BSS writes the uplink power control
information in the IMMEDIATE ASSIGNMENT message after receiving a
Description CHANNEL ACCESS REQUEST message from the MS.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason consider effect to TBF uplink establishment

Set the parameter value to 1 if the power control


Configuration Rule and
is needed for all uplink data blocks during the TBF process when uplink
Adjustment Suggestion
power control is required on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-373

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is valid when the value of UlPwCtrl


Relationship
is 1.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.62 DTM Enhance Capability


Full Name DTM Enhance Capability

Abbreviation DTMEnhanceCapa

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter determines whether the BSC supports enhanced DTM


functions. If yes, the MS establishes the DTM service without releasing
Description the current PS service.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value These functions are not provided in the current


Configuration Reason version.

It is required to configure this parameter


Configuration Rule and
according to the DTM settings and the functions supported by the current
Adjustment Suggestion
version.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-374

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is valid after the switch of


Relationship
enhanced DTM functions for the cell is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.63 Enable PCU resource alarm


Full Name Enable PCU resource alarm

Abbreviation PcuResAlarmEnable

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable the UPPB resource alarm


function. The availability of UPPB board resources can be measured
through the availability of each DSP resource on UPPB board. The mea-
sured indexes include failure ratio for allocating memory, use ratio for
MAC instance, use ratio for BSSGP instance, use ratio of mac-tlli index,
use ratio for bssgp-tlli index, use ratio for radio channel instance, and use
Description ratio for TS instance.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason monitor use ratio of TS instance in time

Set the parameter value to 0 when the UPPB


Configuration Rule and
resource alerting function is not needed. Set the parameter value
Adjustment Suggestion
to 1 when the UPPB resource alerting function is needed.

2-375

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.64 E-UTRAN CCN support


Full Name E-UTRAN CCN support

Abbreviation EUtranCCN

Managed Object BSS Function PS

3GPP Name E-UTRAN_CCN_ACTIVE

3GPP Reference 3GPP TS 44.018

This parameter determines whether to enable the CCN function between


Description a GSM cell and an adjacent LTE cell.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and This function is not implemented in the current


Adjustment Suggestion version. Hence, it is recommended that this function be disabled.

Change Mode Offline

Related features N/A

2-376

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.65 DTM Handover Support


Full Name DTM Handover Support

Abbreviation DTMHandoverSupp

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference 3GPP TS 43.055

This parameter specifies whether DTM handover is supported. When


this function is enabled, the BSC can provide simultaneous CS and
PS handover for DTM subscribers, improving the service continuity for
DTM mode.
Description This function can only be used when the DTM function is enabled.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Enable this function based on the on-site requirement and whether DTM
Configuration Rule and
function is enabled. This function can improve the service continuity
Adjustment Suggestion
during handover.

Change Mode Offline

2-377

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters DTMSupport

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.66 Continue with CS HO While PS HO is failure in DTM HO


Full Name Continue with CS HO While PS HO is failure in DTM HO

Abbreviation DTMHoCsHoCtrl

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference 3GPP TS 43.055

This parameter indicates whether to continue CS handover when PS han-


Description dover fails during DTM handover, when DTM handover is enabled.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Enable this function based on the on-site requirement, whether DTM


Configuration Rule and
function is enabled, and whether DTM switchover function is enabled.
Adjustment Suggestion
This function enables CS handover to proceed even if PS handover fails.

Change Mode Offline

Related features N/A

Related Parameters DTMHandoverSupp

2-378

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.67 Send suspend message when GPRS suspension


Full Name Send suspend message when GPRS suspension

Abbreviation ResumeSetOpt

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter determines whether the SUSPEND procedure at GB


interface can be initiated when GPRS is suspended.
Default value of resumesetopt is 0, that means: when PS service is
suspended, the suspend message isnt sent in Gb interface, the voice
channel release message informs MS that its resumed and doesnt
need to send RA update process resume.
When resumesetopt is 1, that means: when PS service is suspended,
the suspend message is sent in Gb interface, the voice channel release
message informs MS that it isnt resumed and needs to send RA update
process resume.
If resumesetopt is 0and resumemax isnt 3, that means: when PS
service is suspended, the suspend message isnt sent in Gb interface,
the voice channel release message informs MS that its resumed and
doesnt need to send RA update process resume, a resume message is
Description sent in Gb after the voice channel is released. Its used for test.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

2-379

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

when PS service is suspended, the suspend message isnt sent in


Default Value Gb interface, the voice channel release message informs MS that its
Configuration Reason resumed and doesnt need to send RA update process resume, for
reduce the number of RA update.

If need to inform the SGSN that the PS service is suspended, set


Configuration Rule and ResumeSetOpt 1, the number of RA update increases.
Adjustment Suggestion If need to inform the SGSN that the PS service is resumed by a resume
message for test, set ResumeSetOpt 0, and dont set resumemax 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.68 Send by SNDCP indicator


Full Name Send by SNDCP indicator

Abbreviation SNDCPSendInd

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to rank the LLC frames by SNDCP num-
Description ber for transmission.

Instance BSC

0: No
Value Range and Step 1: Yes

2-380

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: disabled

Configuration Rule and Enable this function if sorting by SNDCP is required on site. Otherwise,
Adjustment Suggestion disable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.69 TCP/IP performance enhance


Full Name TCP/IP performance enhance

Abbreviation TCPIPEnhance

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to analyze application layer data and


Description desert LLC frames received by the MS.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-381

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason The functional switch, default: close

Configuration Rule and Enable this function if the TCP/IP optimization enhancement function is
Adjustment Suggestion required on site. Otherwise, disable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.70 IP Segment Optimization


Full Name IP Segment Optimization

Abbreviation IPSegOpt

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates whether IP segment optimization is enabled.


The function is described as follows:
During the segmentation of LLC at the air interface, if the NU is
Description discontinuous, the current LLC will be transmitted with a 20-ms delay.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

2-382

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value Protocol require MS to reorder LLCs received, BSC send LLC in the
Configuration Reason sequence when received at Gb Interface.

Configuration Rule and


Adjustment Suggestion If some MS do not implement as protocol required, switch on the function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.71 Support resource optimizing by service


Full Name Support resource optimizing by service

Abbreviation SuppResOpByService

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable the function of resource


Description control based on the classification of subscriber services.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value This parameter is a functional switch, which


Configuration Reason is disabled by default.

2-383

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion Enable this switch as required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.6.72 Identify of special service


Full Name Identify of special service

Abbreviation SpecServiceIdentify

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter determines which solution (DSCP or BSSGP) is used to


Description identify the specific service.

Instance BSC

0: DSCP
Value Range and Step 1: BSSGP extend

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the DSCP solution is used.

Configuration Rule and This parameter requires negotiation with the


Adjustment Suggestion core network and then determines the solution used for identification.

Change Mode Offline

2-384

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.6.73 Extended uplink dynamic allocation support


Full Name Extended uplink dynamic allocation support

Abbreviation ExUpDynSupport

Managed Object BSS Function PS

3GPP Name EXTENDED_DYNAMIC_ALLOCATION

3GPP Reference N/A

This parameter indicates if cell supports extended uplink dynamic alloca-


tion. While using this function, the MS only need listen USF allocation
with the least timeslot, so you can determine to send uplink block on all
Description allocated uplink timeslot.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Consider Radio Resource Utilization and PS tarffic Model

When the MS supports this function and the


Configuration Rule and uplink PS service transmission is a priority or there are sufficient
Adjustment Suggestion uplink radio resources, enabling the function can increase the uplink
transmission rate.

2-385

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-03-02-007 Extended Dynamic Allocation

Related Parameters N/A

This parameter is valid when the cell-level


Relationship
ExUpDynSupport parameter is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.74 Resource pool for PS rate


Full Name Resource pool for PS rate

Abbreviation PSAbisThs

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates the upper limit of Abis resource proportion


in the Full Dynamic Abis Resource Pool that can be assigned to PS
services. If the limit is exceeded, the remaining idle Abis resources
cannot be assigned to PS services.
The proportion of Abis resources used for PS services = number of Abis
resources Assigned to PS services / total Abis resources available
Description in the resource pool

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 80

Setting this parameter to "80" allows Abis resources to be allocated


Default Value
evenly to PS and CS services. In this case, CS services are given a
Configuration Reason
certain degree of priority.

2-386

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the PS traffic in the cell is high, you


Configuration Rule and can set a higher value not more than 90. If the PS traffic is low
Adjustment Suggestion and there is a shortage of Abis resources, you can lower the value
appropriately to ensure CS services first.

Change Mode Offline

Related features ZGO-03-03-001 Full Dynamic Abis Allocation

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.75 Max users of POC service on shared PS channel uplink


Full Name Max users of POC service on shared PS channel uplink

Abbreviation psCapaThsUl

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates the upper limit of PoC service subscribers in


shared uplink channel.
If dedicated PoC channel is configured, it indicates the upper limit of PoC
subscribers on the uplink of each dedicated PoC channel. If it exceeds
this number, PoC subscriber access is not allowed on the uplink of this
Description dedicated PoC channel.

Instance BSC

Value Range and Step 2..6

Unit N/A

Default Value 3

2-387

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason For reliable signal data transfer speed

Set the maximum number of users sharing the


Configuration Rule and POC dedicated channel on the condition that the rate of POC
Adjustment Suggestion transmission
is ensured according to the POC service feature in the network.

Change Mode Offline

Related features N/A

Related Parameters PocSupport

This parameter is valid when the switch of


Relationship
POS service support is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.76 Max users of POC service on shared PS channel downlink


Full Name Max users of POC service on shared PS channel downlink

Abbreviation psCapaThsDl

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates the upper limit of PoC service subscribers in


shared downlink channel.
If dedicated PoC channel is configured, it indicates the upper limit of
PoC subscribers on the downlink of each dedicated PoC channel. If
it exceeds this number, PoC subscriber access is not allowed on the
Description downlink of this dedicated PoC channel.

Instance BSC

Value Range and Step 2..6

2-388

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 3

Default Value
Configuration Reason For reliable signal data transfer speed

Set the maximum number of users sharing the


Configuration Rule and POC dedicated channel on the condition that the rate of POC
Adjustment Suggestion transmission
is ensured according to the POC service feature in the network.

Change Mode Offline

Related features N/A

Related Parameters PocSupport

This parameter is valid when the switch of


Relationship
POS service support is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.77 Optimized POC service support


Full Name Optimized POC service support

Abbreviation POCSupport

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter indicates if PoC subscriber applies for dedicated POC


channel. PoC indicates Push to talk over Cellular. Consider the MS with
proper function as walkie-talkie. This kind of MS has a talkie key. After
Description pressing this key, you can talk with other subscribers or in a group.

Instance BSC

2-389

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Depends on the POC sevice requirement at BSS network

Set this parameter based on the requirement


Configuration Rule and
for POC service in the network. If special processing is needed for
Adjustment Suggestion
POS service, set the other functions relevant to POS service.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.78 IP abis pool bandwidth restore support


Full Name IP abis pool bandwidth restore support

Abbreviation bwRestore

Managed Object BSS Function PS

3GPP Name No

3GPP Reference N/A

This parameter indicates whether to support the compression and restora-


Description tion of the user plane codec mode according to bandwidth usage.

Instance BSC

2-390

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Disable
1: Enable
2: User Transplant Control
Value Range and Step 3: User Priority Control

Unit N/A

Default Value 0

Default Value
Configuration Reason This is a functional switch and is disabled by default.

Configuration Rule and The value is dependent upon the on-site bandwidth configuration and
Adjustment Suggestion user's bandwidth.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.79 Max LLC num that per bssgp may save


Full Name Max LLC num that per bssgp may save

Abbreviation buffMaxLLCFrameNum

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum number of Logic Link Control


(LLC) frames bufferred in a BSSGP instance. In packet-switched service,
the parameter is used to prevent an instance from occupying extra User
Description Blocks (UBs).

2-391

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance BSC

Value Range and Step 10..255

Unit N/A

Default Value 254

Default Value The parameter is set in accordance with UB of the user plane processing
Configuration Reason board and delivery of LLC frames on the Gb interface.

Configuration Rule and The parameter is set in accordance with UBs of the user plane
Adjustment Suggestion processing board and delivery of LLC frames on the Gb interface.

Change Mode Offline

Related features N/A

Related Parameters LLCTranSAPI0


LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2-392

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.6.80 Max LLC num that per bssgp may transfer


Full Name Max LLC num that per bssgp may transfer

Abbreviation tranMaxLLCFrameNum

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

When an MS reselects a cell in packet-switched service, the LLC frames


of the original cell transfer to the new cell. This parameter indicates the
maximum number of transferred LLC frames in a BSSGP instance. If the
transferred LLC frames exceeds the number, the remaining frames will
Description be discarded.

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 120

Default Value The parameter is set in accordance with network port flow of the user
Configuration Reason plane processing board and LLC frame flow of the Gb interface.

Configuration Rule and The parameter is set in accordance with network port flow of the user
Adjustment Suggestion plane processing board and LLC frame flow of the Gb interface.

Change Mode Offline

Related features N/A

Related Parameters LLCTranSAPI0


LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15

Relationship The parameter is valid when the associated parameter are set to On.

2-393

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2.6.81 RRM threshold


Full Name RRM threshold

Abbreviation RRMThreshold

Managed Object BSS Function PS

3GPP Name N/A

3GPP Reference N/A

Description Ratio of Abis resources that need dynamic management

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 50

It is recommended that 50% resources are controlled by Radio Resource


Default Value
Management (RRM) and the other resources are used in a preemption
Configuration Reason
manner.

Configuration Rule and


Adjustment Suggestion More sufficient resources allow a lower RRM threshold.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship The parameter is valid when the AbisRSDynMng function is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-394

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.82 Parameter of Flow control mode 1


Full Name Parameter of Flow control mode 1

Abbreviation FlowCtlMode1Para

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

In flow control mode 1, BSC reports a flow control parameter in accor-


dance with an actual flow of radio ports. The actual statistical flow is
lower due to radio port retransmission and TBF failure. Therefore, the
actual flow control parameter reported by BSC is the value of actual sta-
Description tistical flow multiplied by a value determined by this parameter.

Instance BSC

Value Range and Step 1..100

Unit N/A

Default Value 1

Default Value
Configuration Reason The parameter is set in accordance with actual network requirements.

The parameter is determined by core network flow control. If the default


Configuration Rule and setting affects downlink data transmission, the parameter should be
Adjustment Suggestion adjusted to a greater value if transmission is intermittent, or be adjusted
to a lower value if transmission is too fast.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

Relationship The parameter is valid when the flow control function is enabled.

Related Interfaces Gb

2-395

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.83 Parameter of Flow control mode 2


Full Name Parameter of Flow control mode 2

Abbreviation FlowCtlMode2Para

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

In flow control mode 2, BSC reports a flow control value in accordance


with the maximum flow of a cell. The maximum flow is determined by the
configured channel quantity (channel quantity max. flow per channel).
This parameter is used to set the maximum flow of a channel, and the unit
Description is 100 bps.

Instance BSC

Value Range and Step 10..1000

Unit N/A

Default Value 700

Default Value The parameter is set in accordance with the maximum theoretical rate of
Configuration Reason a single channel in GPRS.

The parameter is determined by core network flow control. If the default


Configuration Rule and setting affects downlink data transmission, the parameter should be
Adjustment Suggestion adjusted to a greater value if transmission is intermittent, or be adjusted
to a lower value if transmission is too fast.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

2-396

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship The parameter is valid when the flow control function is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.6.84 Coefficient of Bvc bucket size


Full Name Coefficient of Bvc bucket size

Abbreviation BvcBucketPara

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter determines the leaky bucket size of a BSSGP Virtual


Connection (BVC). The leaky bucket size varies with the parameter
value to meet a calibration for flow control deviation.
Description The parameter is available in V6.20.21 or later.

Instance BSC

Value Range and Step 10..20000

Unit N/A

Default Value 1200

Default Value
Configuration Reason The parameter is set in accordance with the default flow control period.

The parameter is determined by core network flow control. If the default


setting affects downlink data transmission, the parameter should be
Configuration Rule and
adjusted in accordance with core network requirements. If the bucket is
Adjustment Suggestion
big, the parameter should be adjusted to a lower value. If the bucket is
small, the parameter should be adjusted to a higher value.

Change Mode Offline

Related features N/A

2-397

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

Relationship The parameter is valid when the flow control function is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.6.85 Coefficient of MS bucket


Full Name Coefficient of MS bucket

Abbreviation MSBucketPara

Managed Object BSS Function PS

3GPP Name None

3GPP Reference N/A

This parameter determines the actual leaky bucket size of a Mobile


Station (MS). The leaky bucket size varies with the parameter value to
meet a calibration for flow control deviation.
Description The parameter is available in V6.20.21 or later.

Instance BSC

Value Range and Step 10..20000

Unit N/A

Default Value 200

Default Value
Configuration Reason The parameter is set in accordance with the default flow control period.

The parameter is determined by core network flow control. If the default


setting affects downlink data transmission, the parameter should be
Configuration Rule and
adjusted in accordance with core network requirements. If the bucket is
Adjustment Suggestion
big, the parameter should be adjusted to a lower value. If the bucket is
small, the parameter should be adjusted to a higher value.

2-398

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters BVCFlowCtrl


MSFlowCtrl
PFCFlowCtrl

Relationship The parameter is valid when the flow control function is enabled.

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.6.86 Enable implicit reject with paging


Full Name Enable implicit reject with paging

Abbreviation SuppPagImpltRej

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

This parameter determines whether an implicit access rejection field is


carried in a paging message. The terminal supporting the implicit rejec-
tion function determines whether to initiate an implicit rejection flow when
Description initiating an access request.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

2-399

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and If the function needs to be enabled, the parameter value is set to 1. If
Adjustment Suggestion the function needs to be disabled, the parameter value is set to 0.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.87 Implicit reject CS and PS with paging


Full Name Implicit reject CS and PS with paging

Abbreviation PagImpltRejCsPs

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

This parameter indicates a field of implicit rejection carried in a paging


message. The field means implicitly rejecting an access to a terminal
Description with low access priority.

Instance BSC

0:not implicit reject CS and PS


1:implicit reject PS
2:implicit reject CS
Value Range and Step 3:implicit reject CS and PS

Unit N/A

Default Value 1

Default Value This parameter is set in according with service importance and
Configuration Reason lower-priority service rejection in service congestion.

2-400

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and The parameter is set in accordance with an actual requirement for
Adjustment Suggestion implicitly rejecting an access to low-priority CS and PS service.

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.6.88 PS service Bar when Gb break


Full Name PS service Bar when Gb break

Abbreviation CellPSBarGbDown

Managed Object BSS Function PS

3GPP Name None

3GPP Reference 3GPP TS48.018

This parameter determines whether the affected cell notifies the related
MS of PS inaccessiable when the Gb interface is broken. The parameter
Description is used to avoid an impact of invalid PS service requests on the system.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The function is disabled if enabling the function is not required on site.

Configuration Rule and


Adjustment Suggestion The function is enabled in accordance with an onsite requirement.

2-401

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGB-03-05-016 BVC Flow Control (in DL)

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSS Function PS

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7 Common Measure and Information


Exchange(GCommMeas)
2.7.1 Common Measure and Information Exchange ID
Full Name Common Measure and Information Exchange ID

Abbreviation GCommMeas

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference N/A

Description Common Measure and Information Exchange ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-402

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.2 Report characteristics


Full Name Report characteristics

Abbreviation ReportType

Managed Object Common Measure and Information Exchange

3GPP Name Report characteristics

3GPP Reference 3GPP 25.423

This parameter indicates the report method of measurement reports,


including:
1 On Demand
2 Periodic
Description 7 Event E

Instance BSC

1: On Demand
2: Period
Value Range and Step 7: Event E

Unit N/A

Default Value 2

Default Value
Configuration Reason general value

2-403

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

To uninterruptedly reflect the load on the


peer end by using the common measurement reporting mode of the Iur-g
Configuration Rule and
interface, select "2" (Periodic). To report measurement reports when
Adjustment Suggestion
certain conditions are met, select "7" (Event E). To report measurement
reports once, select "1" (On Demand).

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReq

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.3 Measurement Load Threshold 1


Full Name Measurement Load Threshold 1

Abbreviation measThrLoad1

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 1 for reporting Load with the Event
E method. The load is reported when the Load value exceeds this thresh-
Description old.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 50

2-404

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason general value

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.4 Measurement RT Load Threshold 1


Full Name Measurement RT Load Threshold 1

Abbreviation measThrRtLoad1

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 1 for reporting RT Load with the
Event E method. The load is reported when the RT Load value exceeds
Description this threshold.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-405

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.5 Measurement NRT Load Threshold 1


Full Name Measurement NRT Load Threshold 1

Abbreviation measThrNrtLoad1

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 1 for reporting NRT Load with the
Event E method. The load is reported when the NRT Load value exceeds
Description this threshold.

Instance BSC

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason general value

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

2-406

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.6 Measurement Load Threshold 2


Full Name Measurement Load Threshold 2

Abbreviation measThrLoad2

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 2 for reporting Load with the Event
E method. The load is reported when the Load value drops below this
Description threshold.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 40

Default Value
Configuration Reason general value

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

Change Mode Offline

Related features N/A

2-407

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters IurgOf2gReqReportType

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.7 Measurement RT Load Threshold 2


Full Name Measurement RT Load Threshold 2

Abbreviation measThrRtLoad2

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 2 for reporting RT Load with the
Event E method. The load is reported when the RT Load value drops
Description below this threshold.

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 40

Default Value
Configuration Reason general value

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship N/A

2-408

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.8 Measurement NRT Load Threshold 2


Full Name Measurement NRT Load Threshold 2

Abbreviation measThrNrtLoad2

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter specifies the threshold 2 for reporting NRT Load with the
Event E method. The load is reported when the NRT Load value drops
Description below this threshold.

Instance BSC

Value Range and Step 0..3

Unit N/A

Default Value 1

Default Value
Configuration Reason general value

Configuration Rule and Set this value to a lower value if measurement reporting is expected to
Adjustment Suggestion be sensitive. Otherwise, set a higher value.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-409

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.9 Report periodicity unit


Full Name Report periodicity unit

Abbreviation RepPeriodUnit

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter indicates the unit of load report period when common
measurement is periodical.
1: 10 ms
Description 2: 1 Min

Instance BSC

1: 10 ms(10 ms)
Value Range and Step 2: 1 Min(1 Min)

Unit N/A

Default Value 1

Default Value In the case of periodic reporting, the unit


Configuration Reason is second.

Generally, the period is short for periodic


reporting, which helps reflect the load on the peer end in real time.
Configuration Rule and
When the requirements on the real-time load on the peer end are
Adjustment Suggestion
relatively
low, the unit can be changed to minute.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship None

2-410

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.10 Report Periodicity Value


Full Name Report Periodicity Value

Abbreviation RepPeriodValue

Managed Object Common Measure and Information Exchange

3GPP Name Report Periodicity Value

3GPP Reference 3GPP 25.423

This parameter indicates the load report period when common


measurement is periodical.
If RepPeriodUnit is 1, the step is 10ms, the value range is 1-6000.
Description If RepPeriodUnit is 2, the step is 1Min, the value range is 1-60.

Instance BSC

{RepPeriodUnit==1}[1..6000]
Value Range and Step {RepPeriodUnit==2}[1..60]

Unit N/A

{RepPeriodUnit==1}100,
Default Value {RepPeriodUnit==2}1

Default Value
Configuration Reason Generally, measurement reports are reported every one second.

To use second or a unit lower than second as


the reporting period, configure "RepPeriodUnit" to "1". In this case,
Configuration Rule and the value of this parameter ranges from 1 to 6000 (10 ms to 60s).
Adjustment Suggestion To use minute as the reporting period, configure "RepPeriodUnit" to
"2". In this case, the value of this parameter ranges from 1 to 60
(1 minute to 60 minutes).

2-411

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters RepPeriodUnit

When "RepPeriodUnit" is configured to "1",


the step is 10ms and the value ranges from 1 to 6000. When
Relationship "RepPeriodUnit"
is configured to "2", the step is 1 minute and the value ranges from
1 to 60.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.11 Measurement Hysteresis Time


Full Name Measurement Hysteresis Time

Abbreviation MeasHys

Managed Object Common Measure and Information Exchange

3GPP Name Measurement Hysteresis Time

3GPP Reference 3GPP 25.423

This parameter determines the delay time of reporting based on event


E. The system reports or stops reporting measurement reports after this
Description delay time when the corresponding conditions are met.

Instance BSC

Value Range and Step 1..6000

Unit N/A

Default Value 100

Default Value
Configuration Reason Generally, configure this parameter to 1s.

2-412

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

To hope that the delay time of reporting based


Configuration Rule and
on event E is short, decrease this value. Otherwise, increase this
Adjustment Suggestion
value.

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.12 Event Report Periodicity


Full Name Event Report Periodicity

Abbreviation EveRepPeriod

Managed Object Common Measure and Information Exchange

3GPP Name Report Periodicity

3GPP Reference 3GPP 25.423

This parameter determines the period of reporting based on event E when


Description the event reporting conditions are met.

Instance BSC

Value Range and Step 1..6000

Unit N/A

Default Value 100

Default Value
Configuration Reason Generally, measurement reports are reported every one second.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion as required.

2-413

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReqReportType

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.13 Information Report Type


Full Name Information Report Type

Abbreviation InfoReportType

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter determines the information reporting mode. 1: reported


Description immediately; 3: reported after being modified

Instance BSC

1: On demand
Value Range and Step 3: Periodic

Unit N/A

Default Value 1

Default Value
Configuration Reason general value

To hope that the information such as load on


Configuration Rule and
the peer end is reported after being modified, configure this parameter
Adjustment Suggestion
to 3.

Change Mode Offline

2-414

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters IurgOf2gReq

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.14 Measurement type


Full Name Measurement type

Abbreviation MeasType

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference 3GPP 25.423

This parameter indicates the common measurement type.


2: Load
6: RT Load
Description 7: NRT Load

Instance BSC

2: Load
6: RT Load
Value Range and Step 7: NRT Load

Unit N/A

Default Value 2

Default Value This interface is designed for China Mobile only. Therefore, configure
Configuration Reason this parameter according to the requirements of China Mobile.

Configuration Rule and According to the requirements of China Mobile,


Adjustment Suggestion this parameter is not modified.

2-415

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters IurgOf2gReq

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.15 Support of 2g request Iur-g


Full Name Support of 2g request Iur-g

Abbreviation IurgOf2gReq

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference N/A

This parameter is a functional switch that determines whether the BSC


can obtain the information of Iur-g capacity and load from the RNC. The
original Iur-g functional switch still takes effect. It controls whether the
RNC obtains the capacity and load information from the BSC.
The value 0 indicates that the BSC does not obtain data from the RNC.
Description The value 1 indicates that the BSC obtains data from the RNC.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-416

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and To enable the Iur-g interface to acquire the


Adjustment Suggestion information of 3G load, enable this switch.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.7.16 Not Real Time Load Overflow Threshold


Full Name Not Real Time Load Overflow Threshold

Abbreviation nrtOverflowThs

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the overload threshold of non-real-time services.


When the load of non-real-time services is equal to or higher than the
threshold, it is considered that the cell is overloaded with non-real-time
services. Non-real-time services refer to PS services. The load is cal-
culated by dividing the number of occupied PDCHs (including dynamic
Description PDCHs and static PDCHs) by the number of available PDCHs.

Instance BSC

Value Range and Step 1..99

Unit %

Default Value 90

2-417

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Generally, it is regarded that the cell is overloaded if more than 90%
Configuration Reason of radio resources are occupied.

The higher the value is, the more likely the cell will be to be selected by
Configuration Rule and
the RNC as the target cell for re-direction.
Adjustment Suggestion
NRTThs_0>NRTThs_1>NRTThs_2

Change Mode Offline

Related features N/A

Related Parameters IurgSupport

This parameter becomes valid when IurgSupport


Relationship
is set to Yes.

Related Interfaces Iur-g interface

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.17 Not Real Time Load High Threshold


Full Name Not Real Time Load High Threshold

Abbreviation nrtHighThs

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the upper overload threshold of non-real-time


services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_0, it is regarded that the
cell is overloaded with non-real-time services. Non-real-time services
refer to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
Description available PDCHs.

2-418

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 1..99

Unit %

Default Value 60

Default Value Generally, it is regarded that the cell is overloaded if more than 60%
Configuration Reason of radio resources are occupied.

The higher the value is, the more likely the cell will be to be selected by
Configuration Rule and
the RNC as the target cell for re-direction.
Adjustment Suggestion
NRTThs_0>NRTThs_1>NRTThs_2

Change Mode Offline

Related features N/A

Related Parameters IurgSupport

This parameter becomes valid when IurgSupport


Relationship
is set to Yes.

Related Interfaces Iur-g interface

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.7.18 Not Real Time Load Low Threshold


Full Name Not Real Time Load Low Threshold

Abbreviation nrtLowThs

Managed Object Common Measure and Information Exchange

3GPP Name N/A

3GPP Reference N/A

2-419

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the lower overload threshold of non-real-time


services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_1, it is regarded that the cell
is moderately loaded with non-real-time services. Otherwise, the load
of non-real-time services is regarded low. Non-real-time services refer
to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
Description available PDCHs.

Instance BSC

Value Range and Step 1..99

Unit %

Default Value 20

Default Value Generally, it is regarded that the cell load is low if less than 20% of radio
Configuration Reason resources are occupied.

The higher the value is, the more likely the cell will be to be selected by
Configuration Rule and
the RNC as the target cell for re-direction.
Adjustment Suggestion
NRTThs_0>NRTThs_1>NRTThs_2

Change Mode Offline

Related features N/A

Related Parameters IurgSupport

This parameter becomes valid when IurgSupport


Relationship
is set to Yes.

Related Interfaces Iur-g interface

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path Information Configuration->Common Measure and Information
Exchange

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-420

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.8 BSC Precise Paging


Configuration(GBssPrecisePaging)
2.8.1 BSC Precise Paging Configuration ID
Full Name BSC Precise Paging Configuration ID

Abbreviation GBssPrecisePaging

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

Description BSC Precise Paging Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-421

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.8.2 Support Precise Paging


Full Name Support Precise Paging

Abbreviation precisePagSupport

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the switch of BSC exact paging. This function
indicates that the system performs paging in the cells for exact paging. If
the system does not reach any subscriber, it performs paging within the
range required by the core network. The exact paging cells include the
Visit Paging Cell (VPC) and Home Paging Cell (HPC). The VPC indicates
a cell around the cell where the last service exists. It can be a handover
or reselection adjacent cell, or can be configured additionally. The HPC
indicates a group of cells calculated based on the cells where latest ser-
Description vices are triggered.

Instance BSC

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason This parameter is a functional switch, which disabled by default.

Generally, configure this parameter according


Configuration Rule and
to operator requirements. In the case of large paging volume, enable
Adjustment Suggestion
the exact paging function to save CCCH channels.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters CsPrecisePaging


PsPrecisePaging

The precise paging (foreground) is used only when the BSC-level and
Relationship
cell-level switches are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

2-422

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.8.3 Use HPC for Precise Paging


Full Name Use HPC for Precise Paging

Abbreviation precisepagUseHpc

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

If this parameter is set to "No", only the VPC is used for exact paging. If
this parameter is set to "Yes", both the VPC and HPC are used for exact
Description paging.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the selection function is disabled.

Configuration Rule and For the fixed cells such as housing and residential
Adjustment Suggestion areas, the HPC can be used.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

2-423

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail New

2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service


Full Name Adopt Precise Paging for repaging of Circuit Switched Service

Abbreviation csRepagPrecise

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

When the first paging is not responded for the CS service, the core net-
work may initiate paging for another time. This parameter determines
whether the exact paging policy is applied for subsequent paging opera-
Description tions of the CS service in the core network.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The paging time must not be excessively long.

It is required to configure this parameter


Configuration Rule and
according to operator requirements. When subscribers can accept a
Adjustment Suggestion
relatively long connection time, enable this switch.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710d

2-424

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail New

2.8.5 Adopt Precise Paging for repaging of Packet Switched Service


Full Name Adopt Precise Paging for repaging of Packet Switched Service

Abbreviation psRepagPrecise

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

When the first paging is not responded for the PS service, the core net-
work may initiate paging for another time. This parameter determines
whether the exact paging policy is applied for subsequent paging opera-
Description tions of the PS service in the core network.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The paging time must not be excessively long.

It is required to configure this parameter


Configuration Rule and according to operator requirements. When PS paging is mainly for non
Adjustment Suggestion real-time services or subscribers can accept a relatively long connection
time, enable this switch.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

2-425

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710d

Parameter Modifying
Detail New

2.8.6 Allow Exceed area Precise Paging for Circuit Switched


Service
Full Name Allow Exceed area Precise Paging for Circuit Switched Service

Abbreviation csOutAreaPag

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the exact paging of CS service covers


the cells out of the paging range of core network. The paging of CS service
is usually applied for location cells. However, some VPCs and HPCs may
Description not in these location cells.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Usually, subscribers are not out of the paging range of core network.

Usually, this function is disabled. When the


Configuration Rule and
location cell is updated and the BSC fails to acquire IMSI to record
Adjustment Suggestion
the subscriber location, this function can be enabled.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-426

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.8.7 Allow Exceed area Precise Paging for Packet Switched


Service
Full Name Allow Exceed area Precise Paging for Packet Switched Service

Abbreviation psOutAreaPag

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the exact paging of PS service covers


the cells out of the paging range of core network. The paging of PS service
is usually applied for routing cells. However, some VPCs and HPCs may
Description not in these routing cells.

Instance BSC

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Usually, subscribers are not out of the paging range of core network.

Usually, this function is disabled. When the


Configuration Rule and
routing cell is updated and the BSC fails to acquire IMSI to record
Adjustment Suggestion
the subscriber location, this function can be enabled.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-427

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.8.8 Paging Repeat Time for Circuit Switched Service


Full Name Paging Repeat Time for Circuit Switched Service

Abbreviation csPagingRepeatTime

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum retry times of CS service


paging (exact paging excluded).
When the first paging is not responded, the system can initiate multiple
Description paging operations according to the value of this parameter.

Instance BSC

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value Usually, multiple paging operations are applied on the BSC only when
Configuration Reason this function is not applied in the core network.

Configuration Rule and Multiple paging operations are applied on the


Adjustment Suggestion BSC only when this function is not applied in the core network.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

2-428

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.8.9 Paging Repeat Time for Packet Switched Service


Full Name Paging Repeat Time for Packet Switched Service

Abbreviation psPagingRepeatTime

Managed Object BSC Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum retry times of PS service


paging (exact paging excluded).
When the first paging is not responded, the system can initiate multiple
Description paging operations according to the value of this parameter.

Instance BSC

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value Usually, multiple paging operations are applied on the BSC only when
Configuration Reason this function is not applied in the core network.

Configuration Rule and Multiple paging operations are applied on the


Adjustment Suggestion BSC only when this function is not applied in the core network.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Precise Paging Configuration

2-429

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.9 BSC Reserved Configuration(GBssFunctionRsv)


2.9.1 BSC Reserved Configuration ID
Full Name BSC Reserved Configuration ID

Abbreviation GBssFunctionRsv

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description BSC Reserved Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

2-430

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.9.2 Global Reserved Parameter 1


Full Name Global Reserved Parameter 1

Abbreviation reserved1

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 1

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-431

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.9.3 Global Reserved Parameter 2


Full Name Global Reserved Parameter 2

Abbreviation reserved2

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 2

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.4 Global Reserved Parameter 3


Full Name Global Reserved Parameter 3

Abbreviation reserved3

Managed Object BSC Reserved Configuration

2-432

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 3

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.5 Global Reserved Parameter 4


Full Name Global Reserved Parameter 4

Abbreviation reserved4

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 4

Instance BSC

2-433

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.6 Global Reserved Parameter 5


Full Name Global Reserved Parameter 5

Abbreviation reserved5

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 5

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value 0

2-434

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.7 Global Reserved Parameter 6


Full Name Global Reserved Parameter 6

Abbreviation reserved6

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 6

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-435

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.8 Global Reserved Parameter 7


Full Name Global Reserved Parameter 7

Abbreviation reserved7

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 7

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-436

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.9 Global Reserved Parameter 8


Full Name Global Reserved Parameter 8

Abbreviation reserved8

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 8

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-437

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.10 Global Reserved Parameter 9


Full Name Global Reserved Parameter 9

Abbreviation reserved9

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 9

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

2-438

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.9.11 Global Reserved Parameter 10


Full Name Global Reserved Parameter 10

Abbreviation reserved10

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 10

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-439

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.9.12 Global Reserved Parameter 11


Full Name Global Reserved Parameter 11

Abbreviation reserved11

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 11

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.13 Global Reserved Parameter 12


Full Name Global Reserved Parameter 12

Abbreviation reserved12

Managed Object BSC Reserved Configuration

2-440

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 12

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.14 Global Reserved Parameter 13


Full Name Global Reserved Parameter 13

Abbreviation reserved13

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 13

Instance BSC

2-441

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.15 Global Reserved Parameter 14


Full Name Global Reserved Parameter 14

Abbreviation reserved14

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 14

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

2-442

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.16 Global Reserved Parameter 15


Full Name Global Reserved Parameter 15

Abbreviation reserved15

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 15

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-443

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.17 Global Reserved Parameter 16


Full Name Global Reserved Parameter 16

Abbreviation reserved16

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 16

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-444

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.18 Global Reserved Parameter 17


Full Name Global Reserved Parameter 17

Abbreviation reserved17

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 17

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-445

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.9.19 Global Reserved Parameter 18


Full Name Global Reserved Parameter 18

Abbreviation reserved18

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 18

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

2-446

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.9.20 Global Reserved Parameter 19


Full Name Global Reserved Parameter 19

Abbreviation reserved19

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 19

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-447

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.9.21 Global Reserved Parameter 20


Full Name Global Reserved Parameter 20

Abbreviation reserved20

Managed Object BSC Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Global Reserved Parameter 20

Instance BSC

Value Range and Step N/A

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Global


OMC Access Path
Information Configuration->BSC Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-448

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.10 External GSM Cell


Configuration(GExternalGsmCell)
2.10.1 External GSM Cell ID
Full Name External GSM Cell ID

Abbreviation GExternalGsmCell

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description External GSM Cell ID

Instance None

Value Range and Step 1..65535

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-449

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.10.2 Cell Identity


Full Name Cell Identity

Abbreviation cellIdentity

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Network operators must allocate a unique code to each cell in a location


Description area to identify every cell.

Instance Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.3 BCCH arfcn


Full Name BCCH arfcn

Abbreviation bcchFrequency

2-450

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the ARFCN of the BCCH carrier in the cell.

Instance Cell

Value Range and Step 0..1023

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.4 NCC
Full Name NCC

Abbreviation ncc

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-451

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

NCC is one of the composition parts of Base Station ID Code (BSIC)


(BSIC = NCC + BCC). which is used to enable the MS to distinguish ad-
jacent and different GSM PLMN cells. Normally, adjacent operators shall
have different NCCs. The parameter related to NCC is NccPermitted of
the cell. By prohibiting MS to report related NCC in the cell, MS is pro-
hibited to measure the cell information of the related operators. Actually,
NCC occupies three bits. NCC is one of the network identification param-
Description eters.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.5 BCC
Full Name BCC

Abbreviation bcc

Managed Object External GSM Cell Configuration

3GPP Name N/A

2-452

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

BCC is one of the composition parts of Base Station ID Code (BSIC) (BSIC
= NCC + BCC). Normally, BCC is used to enable MS to distinguish ad-
jacent cells with the same BCCH carrier frequency and belonging to the
same GSM PLMN. In addition, the GSM specifications stipulate that the
TSC (Training Sequence Code) of the broadcast control channel of a cell
shall be equal to the cell BCC. BCC occupies three bits BCC is one of the
Description network identification parameters.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.6 LAC (LAC)


Full Name LAC (LAC)

Abbreviation lac

Managed Object External GSM Cell Configuration

2-453

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Each GSM PLMN is divided into many location areas (LAs) in order to
determine the MS location, the location area code identifies the different
location areas. LAC comes under LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description This parameter is consistent with the data at CN side.

Instance Cell

Value Range and Step 1..65533, 65535

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.7 MCC
Full Name MCC

Abbreviation mcc

Managed Object External GSM Cell Configuration

3GPP Name N/A

2-454

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

MCC consists of three digits of decimal number. It is used to uniquely


Description identify the home country of the mobile user (or system).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.8 MNC
Full Name MNC

Abbreviation mnc

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

MNC consists of three digits of decimal number. It uniquely identifies a


Description specific PLMN network in a country (determined by MCC).

2-455

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters MNCBcdCodeLen

If MNC3Digits is set to two digits, the mobile network number can only
be two digits of decimal number. If MNC3Digits is set to three digits, the
Relationship mobile network number can only be three digits of decimal number. If
MNC3Digits is set to two or three digits, the mobile network number can
only be two or three digits of decimal number.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.9 FreqBand
Full Name FreqBand

Abbreviation freqBand

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the frequency band of the system.

Instance Cell

2-456

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
Value Range and Step 7: GSM850\(128..251\)(GSM850\(128..251\))

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters bcchFrequency

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.10 Cell type


Full Name Cell type

Abbreviation cellType

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the GERAN External Cell type.

Instance Cell

2-457

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Umbrella Cell
1: Macro Cell
2: Micro Cell
3: Micro-micro Cell
Value Range and Step 4: Extended Cell

Unit N/A

Default Value 1

Default Value
Configuration Reason None

Configuration Rule and This parameter just indicates the type of external
Adjustment Suggestion adjacent cells. It does not impact the services.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.11 GPRS service support


Full Name GPRS service support

Abbreviation psSupport

Managed Object External GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

Description This parameter describes whether the cell supports GPRS.

Instance Cell

2-458

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration based on actual demand

This parameter is selected by the adjacent


Configuration Rule and
cell. This cell is selected during the reselection of the GPRS service
Adjustment Suggestion
cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

If "GPRS Supported (PsSupport)" is No, that


Relationship is, GPRS is not supported, the system automatically changes all timeslot
channels whose type is PS in the cell to TCH.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.12 Allow SOLSA MS to access


Full Name Allow SOLSA MS to access

Abbreviation exc_acc

Managed Object External GSM Cell Configuration

3GPP Name EXC_ACC

3GPP Reference 3GPP TS 44.060

2-459

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies whether to allow SoLSA MSs to access the


system. It is broadcast to the MS in the PSI3 and PSI3bis system
messages when PBCCH is configured. When the PBCCH does not
exist, the parameter is sent to specified MSs via the PACKET CELL
CHANGE ORDER message or PACKET MEASUREMENT ORDER
message on the PACCH.
The parameter is used to prevent MSs without SoLSA special right from
residing in the cell. Support of Localized Service Area (SoLSA) is a
local service provided by a cell or a series of cells which can be either
Description under continuous coverage or not.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason normaly the non-SoLSA MS is not forbidden to access

Configuration Rule and If MSs with SoLSA access authorization are


Adjustment Suggestion expected to access a cell, set this parameter "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.13 LSA ID
Full Name LSA ID

2-460

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation lsa_Id

Managed Object External GSM Cell Configuration

3GPP Name LSA ID

3GPP Reference 3GPP TS 45.008

This parameter indicates the LSA ID of the MS. It is broadcast to the MS


Description via the SI4 message on the BCCH.

Instance Cell

Value Range and Step 0..16777215

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to network operation planning.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.14 RAC (RAC)


Full Name RAC (RAC)

Abbreviation rac

Managed Object External GSM Cell Configuration

3GPP Name N/A

2-461

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS23.060

RAC is a composition part of Routing Area Identity (RAI). RAI defines the
GPRS serving cell identification. GPRS system divides the location area
(LAs) to several routing areas (RAs) using RAI (MCC+MNC+LAC+RAC).
Routing Area (RA) distribution, similar to GSM system, uses the location
area to manage a group of cells. MS initiates Routing area update
procedure in cell reselection mode if new RAI differs from old RAI during
cell reselection.
SGSN knows the routing area information of the MS in the standby
status. Then, when the network has packet data or circuit data to
transmit, it will page the MS in that routing area. RAI cannot span more
than one SGSN.
Description This parameter is consistent with the data at CN side.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-462

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.10.15 Cell bar access 2


Full Name Cell bar access 2

Abbreviation cellBarAc2

Managed Object External GSM Cell Configuration

3GPP Name CELL_BAR ACCESS_2

3GPP Reference 3GPP TS 45.008

This parameter is broadcast to MSs. This parameter, together with the


system parameters CELL_BAR_ACCESS and CELL_BAR_QULIFY,
determines the cell reselection status. 0 indicates that the cell reselection
is in normal status, and 1 indicates that the cell reselection in Forbidden
status. The relation between the CBA2, cell reselection priority, and cell
reselection status is shown in table 1:
CELL_BAR ACCESS_2CBA2 Cell reselection priority Cell
Reselection Status
No Yes Yes
Description Yes Forbidden Forbidden

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

This parameter can be set by network operators. Generally all cells


allow the access of MSs and therefore this parameter can be set to
0. In special cases, the telecom operator may expect a cell to provide
handover services only. To meet such a requirement, set this parameter
to 1 (the prerequisite is that CBQ is 0), see figure 1.
Figure 1 Cell BarAccessDiagram
Assume that area A (shadow in the figure) is a busy area, for example,
CBD in a large city. To improve the access performance with the limited
Configuration Rule and frequency resource, the micro-cell coverage solution is always used.
Adjustment Suggestion In addition, to reduce the times of cross-area handovers during MSs
move with a high speed, a dual-layer network is always used. That is,
build base station A (can be configured with a small capacity) to cover
the whole area A. In normal situations, all MSs work in the micro-cell
(This can be accomplished through the cell priority and appropriate
reselection parameters). When an MS moves fast during a conversation,
the network forcibly hands over the MS to base station A. If the MS
is near base station A and at the edge of the micro-cell when the call
is terminated, the MS does not trigger cell reselection because signal

2-463

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

quality in base station A is far optimal than micro-cell, as specified in


GSM specifications, see the figure. Thus, the MS cannot return to
the micro-cell. In this case, site A may be congested due to its small
capacity. To solve this problem, set the cell bar access bit to 1 for bases
station A, meaning that MSs cannot directly access site A and only
handover services are allowed in its coverage area.
Note:
This parameter is only applicable for specical scenarios. In normal
situations, set it to 0.

Change Mode Offline

Related features N/A

Related Parameters CellBarAccess


CellBarQualify

The parameterr together with CBQ and CBA, determine the cell
reselection priority and cell reselection state, as shown in the table: CBQ
CBA cell reselection priority cell reselection state
No No Normal Normal
No Yes Forbidden Forbidden
Yes No Low Normal
Yes Yes Low Normal
Relationship
Note: If the following conditions are fulfilled, the cell reselection priority
and cell reselection state are normal.
The cell belongs to the PLMN that MSs camps on.
The MS is in test operation mode.
The cell access forbidden parameter is set "YES".
The cell access forbidden parameter is set "NO".
The access control level "15" is forbidden.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-464

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.10.16 GPRS access minimal signal level in idle


Full Name GPRS access minimal signal level in idle

Abbreviation rxLevAsMin1

Managed Object External GSM Cell Configuration

3GPP Name GPRS_RXLEV_ACCESS_MIN

3GPP Reference 3GPP TS 45.008

This parameter used by the MS indicates the minimum Rx level allowed


the MS to access this system (GPRS). This parameter is broadcast to
the MSs by the BTS via the packet system messages on the PBCCH.
The minimum Rx level is used to avoid unsatisfactory call quality when
MS access the system at too low a level, which is a waste of system
resources. This parameter (used for calculating C31 and C32) is one
of the decision-making criteria for cell selection and reselection by the
MS. It is used for the reselection in the idle state, and is only valid when
Description PBCCH is configured.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 12

Default Value
Configuration Reason Configuration according to the range starting value

Generally, the recommended value should be close to the receiving


sensitivity of the MS. For the cell with overloaded traffic, users can
appropriately improve the cell's minimum receiving level, to reduce the
C1 and C32 values of the cell, and to reduce the effective coverage
scope of the cell. Whereas the value of the minimum receiving level
Configuration Rule and should not be too large, to prevent the cell boundary from any blind
Adjustment Suggestion area. It is recommended to set the level value as no more than -90
dBm, to balance traffic. At the initial operation period of the network, this
parameter value can be set to 10 (that is, -101 dBm~-100 dBm) or even
smaller but higher than the receiving sensitivity (-102 dBm) of the MS.
When the network capacity or radio coverage is not a major problem in
some areas, users can increase this parameter value of some cells by 2.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-465

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.17 GPRS MAX initial access signal level in idle


Full Name GPRS MAX initial access signal level in idle

Abbreviation msTxmaxCch1

Managed Object External GSM Cell Configuration

3GPP Name GPRS_MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

This parameter used by the MS indicates the maximum GPRS initial


access level. The parameter is broadcast to the MSs by the BTS via the
packet system messages on the PBCCH. It is used for the reselection in
the idle state, and is only valid when PBCCH is configured.
During the communication between the MS and BTS, the transmission
power of MS is controlled by the network via the power command. The
MS must employ the Tx power specified by the network as its output
power. If the MS cannot produce the specified output power, the output
power closest to the specified value must be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS when
MSs at cell boundaries have a certain access success rate. The
recommended values are 5 (GSM900MS) and 2 (GSM1800MS). In
application, set the parameter to a value, and then perform call test at cell
Description boundaries to decide whether to improve or reduce the parameter value.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

2-466

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Configuration according to the range starting value

the higher the value, the stronger the inter-timeslot interrupption near
Configuration Rule and site, the lower access success propability in the cell edge.The value
Adjustment Suggestion should be as low as possible on the premise of some access success
propablity.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.18 Cell reselection offset in idle


Full Name Cell reselection offset in idle

Abbreviation reselOff1

Managed Object External GSM Cell Configuration

3GPP Name GPRS_RESELECT_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter used by the MS indicates the GPRS reselection offset. It


is broadcast to the MSs by the BTS via the packet system messages on
the PBCCH. It is used for the reselection in the idle state, and is only
valid when PBCCH is configured. In the GPRS system, C32 is employed
as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
Description In the above formula,

2-467

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset which
contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time.
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
PRIORITY_CLASS indicates the HCS priority of the cell.

Instance Cell

Value Range and Step 0..31

Unit 2db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The priority of access to a cell becomes higher


Configuration Rule and
if this parameter is set higher, and it becomes easier for MS to handover
Adjustment Suggestion
to this cell during reselection.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-468

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.10.19 Cell reselection temporary offset in idle


Full Name Cell reselection temporary offset in idle

Abbreviation tempOffset1

Managed Object External GSM Cell Configuration

3GPP Name GPRS_TEMPORARY_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter used by the MS indicates the GPRS reselection


temporary offset. It is broadcast to the MSs by the BTS via the packet
system messages on the PBCCH. It is used for the reselection in the
idle state, and is only valid when PBCCH is configured. In the GPRS
system, C32 is employed as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset which
contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time (penalTime1).
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
Description PRIORITY_CLASS indicates the HCS priority of the cell.

Instance Cell

Value Range and Step 0..7

Unit db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The parameter is to avoid the ping-pong cell reselection.If the signal


Configuration Rule and
strenghth RLC_P keeps no long than Penalty Time, MS don't select the
Adjustment Suggestion
cell.So the parameter is suggested the MAX value.

Change Mode Offline

2-469

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.20 Penalty time of cell reselection in idle


Full Name Penalty time of cell reselection in idle

Abbreviation penalTime1

Managed Object External GSM Cell Configuration

3GPP Name GPRS_PENALTY_TIME

3GPP Reference 3GPP TS 45.008

This parameter used by the MS indicates the GPRS reselection penalty


time. It is broadcast to the MSs by the BTS via the packet system
messages on the PBCCH. It is used for the reselection in the idle state,
and is only valid when PBCCH is configured. In the GPRS system, C32
is employed as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
Description
cell.

2-470

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GPRS_TEMPORARY_OFFSET is a temporary reselection offset which


contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time (penalTime1).
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
PRIORITY_CLASS indicates the HCS priority of the cell.

Instance Cell

Value Range and Step 0..31

Unit db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The coverage area and mobility statistical


data should be taken into consideration when setting this parameter.
Configuration Rule and
If a fast-moving MS is not expected to access a micro-cell, the penalty
Adjustment Suggestion
time should be longer when the micro-cell becomes bigger.For regular
micro-cell, it is recommended to set this parameter 20.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.21 HSC exist in idle


Full Name HSC exist in idle

Abbreviation hcs_Exist1

Managed Object External GSM Cell Configuration

2-471

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter is used for reselection in the idle state, indicating whether
the Hierarchical Cell Structure (HCS) parameters exist in the cell, includ-
ing the HCS priority and HCS signal level threshold. If the local cell does
not use HCS parameters, the HCS parameters are neglected in other
Description cells. In this case, all cells use an infinite HCS signal level threshold.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

When the radio network have different cell


reselection priority, set this parameter "Yes" if the C31 judgment
Configuration Rule and
criteria for the priority cell reselection and signal level threshold
Adjustment Suggestion
are applied. When more than one cell has the highest priority, C32
judgment criteria should be used for the cells with a same priority.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.22 Threshold of HSC signal level in idle


Full Name Threshold of HSC signal level in idle

Abbreviation hcs_Thr1

2-472

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object External GSM Cell Configuration

3GPP Name HCS_THR

3GPP Reference 3GPP TS 45.008

This parameter is used by the MS for reselection in the idle state when
PBCCH is configured, indicating the Hierarchical Cell Structure (HCS)
signal level threshold in the cell. It is broadcast to the MS by the BTS via
Description system messages on the PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The parameter indicates the minimum access


Configuration Rule and electricity level threshold. It is easier to access a cell when the
Adjustment Suggestion threshold gets lower. Increase the threshold to limit the MS access
to a cell.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.23 HCS priority in idle


Full Name HCS priority in idle

Abbreviation prioClass1

2-473

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object External GSM Cell Configuration

3GPP Name PRIORITY_CLASS

3GPP Reference 3GPP TS 45.008

This parameter is used by the MS for reselection in the idle state when
PBCCH is configured, indicating the cell Hierarchical Cell Structure (HCS)
priority. It is broadcast by the BTS to the MS via system messages on the
Description PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and The priority of an HCS cell gets higher with
Adjustment Suggestion the increase of the parameter value.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.24 GPRS access minimal signal level in transfer


Full Name GPRS access minimal signal level in transfer

Abbreviation rxLevAsMin2

Managed Object External GSM Cell Configuration

3GPP Name GPRS_RXLEV_ACCESS_MIN

2-474

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter is used for reselection by the MS in the transfer state,


indicating the minimum Rx level allowed for the MS to access this
system (GPRS). This parameter is broadcast to the MSs by the BTS via
the packet system messages on the PACCH.
The minimum Rx level is used to avoid unsatisfactory call quality when
MS accesses the system at too low a level, which is a waste of system
resources. This parameter (used for calculating C31 and C32) is one
of the decision-making criteria for cell selection and reselection by the
MS. It is used for the reselection in the idle state, and is only valid when
Description PACCH is configured.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 12

Default Value
Configuration Reason Configuration according to the range starting value

Generally, the recommended value should be close to the receiving


sensitivity of the MS. For the cell with overloaded traffic, users can
appropriately improve the cell's minimum receiving level, to reduce the
C1 and C32 values of the cell, and to reduce the effective coverage
scope of the cell. Whereas the value of the minimum receiving level
Configuration Rule and should not be too large, to prevent the cell boundary from any blind
Adjustment Suggestion area. It is recommended to set the level value as no more than -90
dBm, to balance traffic. At the initial operation period of the network, this
parameter value can be set to 10 (that is, -101 dBm~-100 dBm)or even
smaller but higher than the receiving sensitivity (-102 dBm) of the MS.
When the network capacity or radio coverage is not a major problem in
some areas, users can increase this parameter value of some cells by 2.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

2-475

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.25 GPRS MAX initial access signal level in transfer


Full Name GPRS MAX initial access signal level in transfer

Abbreviation msTxmaxCch2

Managed Object External GSM Cell Configuration

3GPP Name GPRS_MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

This parameter is used for reselection by the MS in the transfer state,


indicating the maximum GPRS initial access level. The parameter is
broadcast to the MSs by the BTS via the packet system messages on
the PACCH. It is only valid when PACCH is configured.
During the communication between the MS and BTS, the transmission
power of MS is controlled by the network via the power command. The
MS must employ the Tx power specified by the network as its output
power. If the MS cannot produce the specified output power, the output
power closest to the specified value must be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS when
MSs at cell boundaries have a certain access success rate. The
recommended values are 5 (GSM900MS) and 2 (GSM1800MS). In
application, set the parameter to a value, and then perform call test at cell
Description boundaries to decide whether to improve or reduce the parameter value.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Configuration according to the range starting value

the higher the value, the stronger the inter-timeslot interrupption near
Configuration Rule and site, the lower access success propability in the cell edge.The value
Adjustment Suggestion should be as low as possible on the premise of some access success
propablity.

Change Mode Offline

2-476

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.26 Cell reselection offset in transfer


Full Name Cell reselection offset in transfer

Abbreviation reselOff2

Managed Object External GSM Cell Configuration

3GPP Name GPRS_RESELECT_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter is used for the reselection by the MS in the transfer


state, indicating the GPRS reselection offset. It is broadcast to the MSs
by the BTS via the packet system messages on the PACCH, and is only
valid when PACCH is configured. In the GPRS system, C32 is employed
as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
Description
cell.

2-477

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GPRS_TEMPORARY_OFFSET is a temporary reselection offset which


contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time.
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
PRIORITY_CLASS indicates the HCS priority of the cell.

Instance Cell

Value Range and Step 0..31

Unit 2db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The priority of access to a cell becomes higher


Configuration Rule and
if this parameter is set higher, and it becomes easier for MS to handover
Adjustment Suggestion
to this cell during reselection.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.27 Cell reselection temporary offset in transfer


Full Name Cell reselection temporary offset in transfer

Abbreviation tempOffset2

Managed Object External GSM Cell Configuration

3GPP Name GPRS_TEMPORARY_OFFSET

2-478

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter is used for the reselection by the MS in the transfer state,
indicating the GPRS reselection temporary offset. It is broadcast to the
MSs by the BTS via the packet system messages on the PACCH, and
is only valid when PACCH is configured. In the GPRS system, C32 is
employed as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset which
contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time (penalTime1).
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
Description PRIORITY_CLASS indicates the HCS priority of the cell.

Instance Cell

Value Range and Step 0..7

Unit db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The parameter is to avoid the ping-pong cell reselection.If the signal


Configuration Rule and
strenghth RLC_P keeps no long than Penalty Time, MS don't select the
Adjustment Suggestion
cell.So the parameter is suggested the MAX value.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-479

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.28 Penalty time of cell reselection in transfer


Full Name Penalty time of cell reselection in transfer

Abbreviation penalTime2

Managed Object External GSM Cell Configuration

3GPP Name GPRS_PENALTY_TIME

3GPP Reference 3GPP TS 45.008

This parameter is used for the reselection by the MS in the transfer


state, indicating the GPRS reselection penalty time. It is broadcast to
the MSs by the BTS via the packet system messages on the PACCH,
and is only valid when PACCH is configured. In the GPRS system, C32
is employed as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
In the above formula,
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset which
contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time (penalTime1).
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
Description PRIORITY_CLASS indicates the HCS priority of the cell.

2-480

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 0..31

Unit db

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The coverage area and mobility statistical


data should be taken into consideration when setting this parameter.
Configuration Rule and
If a fast-moving MS is not expected to access a micro-cell, the penalty
Adjustment Suggestion
time should be longer when the micro-cell becomes bigger.For regular
micro-cell, it is recommended to set this parameter 20.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.29 HSC exist in transfer


Full Name HSC exist in transfer

Abbreviation hcs_Exist2

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-481

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is used for reselection in the transfer state, indicating


whether the Hierarchical Cell Structure (HCS) parameters exist in the cell,
including the HCS priority and HCS signal level threshold. If the local
cell does not use HCS parameters, the HCS parameters are neglected in
Description other cells. In this case, all cells use an infinite HCS signal level threshold.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

When the radio network have different cell


reselection priority, set this parameter "Yes" if the C31 judgment
Configuration Rule and
criteria for the priority cell reselection and signal level threshold
Adjustment Suggestion
are applied. When more than one cell has the highest priority, C32
judgment criteria should be used for the cells with a same priority.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.30 Threshold of HSC signal level in transfer


Full Name Threshold of HSC signal level in transfer

Abbreviation hcs_Thr2

Managed Object External GSM Cell Configuration

3GPP Name HCS_THR

2-482

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter is used by the MS for reselection in the transfer state


when PACCH is configured, indicating the Hierarchical Cell Structure
(HCS) signal level threshold in the cell. It is broadcast to the MS by the
Description BTS via system messages on the PACCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The parameter indicates the minimum access


Configuration Rule and electricity level threshold. It is easier to access a cell when the
Adjustment Suggestion threshold gets lower. Increase the threshold to limit the MS access
to a cell.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.31 HCS priority in transfer


Full Name HCS priority in transfer

Abbreviation prioClass2

Managed Object External GSM Cell Configuration

3GPP Name PRIORITY_CLASS

2-483

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 45.008

This parameter is used by the MS for reselection in the transfer state when
PACCH is configured, indicating the cell Hierarchical Cell Structure (HCS)
priority. It is broadcast by the BTS to the MS via system messages on the
Description PACCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and The priority of an HCS cell gets higher with
Adjustment Suggestion the increase of the parameter value.

Change Mode Offline

Related features ZGB-02-02-006 GPRS MS Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.32 MAX power level of MS


Full Name MAX power level of MS

Abbreviation MsTxPwrMax

Managed Object External GSM Cell Configuration

3GPP Name MS_TXPWR_MAX

3GPP Reference 3GPP TS 45.008

2-484

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

During the communication between the MS and the BTS, the


transmission power is controlled by the network. The network sets
the power for MS through the power command and the command is
transmitted on SACCH (SACCH has 2 header bytes, one is the power
control byte and the other is the timing advance byte).
MS must extract the power control header from downward SACCH and
takes the specified transmission power as output power. If the power
level of MS cannot output the power value, it will output the closest
transmission power that can be output. During BSC power control, this
parameter determines the maximum transmission power available for
Description MS in the cell. BSC also uses it to calculate PBGT value.

Instance Cell

Value Range and Step 0..31

Unit N/A

{freqBand==0}5,
{freqBand==1}5,
{freqBand==2}0,
{freqBand==4}0,
Default Value {freqBand==7}5

Default Value
Configuration Reason Maximum power of the majority of mobile phone

Configuration Rule and For 900 M, set the parameter to 5; for 1800
Adjustment Suggestion M, set it to 0.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2-485

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.10.33 RemoteSp DN
Full Name RemoteSp DN

Abbreviation refRemoteSp

Managed Object External GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the DN of the adjacent BSC.

Instance Cell

Value Range and Step N/A

Unit N/A

Default Value NA

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion Set this parameter based on the on-site planning

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.10.34 Um soft Synchronous Support


Full Name Um soft Synchronous Support

Abbreviation UmSynSupport

Managed Object External GSM Cell Configuration

2-486

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description Enables/Disables the Um soft synchronous function.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default this parameter is set to "No".

Configuration Rule and This parameter is set to "Yes" if the soft synchronization function on the
Adjustment Suggestion air interface needs to be enabled.

Change Mode Offline

Related features N/A

Related Parameters Gumsyn.UmSynSupport

When the Gumsyn.UmSynSupport parameter is set to "enbaled", this


Relationship parameter must be set to "Enabled" to activate the Um soft Synchronous
function for the external neighbor cell.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11 External UTRAN FDD Cell


Configuration(GExternalUtranCellFDD)
2.11.1 External UTRAN FDD Cell ID
Full Name External UTRAN FDD Cell ID

2-487

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation GExternalUtranCellFDD

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description External UTRAN FDD Cell ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.2 CI
Full Name CI

Abbreviation ci

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

2-488

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates the CELL ID (CI) of a UTRAN FDD cell. To dis-
tinguish each cell in GSM PLMN uniquely, the network operator allocates
Description a unique ID for each cell in a location area.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.3 MCC
Full Name MCC

Abbreviation mcc

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

MCC consists of three digits of decimal number. It is used to uniquely


Description identify the home country of the mobile user (or system).

Instance Cell

2-489

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.4 MNC
Full Name MNC

Abbreviation mnc

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

MNC consists of three digits of decimal number. It uniquely identifies a


Description specific PLMN network in a country (determined by MCC).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

2-490

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters MNCBcdCodeLen

If MNC3Digits is set to two digits, the mobile network number can only
be two digits of decimal number. If MNC3Digits is set to three digits, the
Relationship mobile network number can only be three digits of decimal number. If
MNC3Digits is set to two or three digits, the mobile network number can
only be two or three digits of decimal number.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.5 RNC ID
Full Name RNC ID

Abbreviation rnc_id

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

Each RNC has a unique number in the UTRAN network of PLMN to route
Description corresponding UTRAN interface message correctly.

Instance Cell

Value Range and Step 0..4095

Unit N/A

Default Value 0

2-491

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features ZGO-02-03-009 GSM/WCDMA Interworking Phase II

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.6 LAC (LAC)


Full Name LAC (LAC)

Abbreviation lac

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

Each GSM PLMN is divided into many location areas (LAs) in order to
determine the MS location, the location area code identifies the different
location areas. LAC comes under LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description This parameter is consistent with the data at CN side.

Instance Cell

Value Range and Step 1..65533, 65535

Unit N/A

Default Value 0

2-492

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.7 UTRAN cell frequency


Full Name UTRAN cell frequency

Abbreviation arfcn3g

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

Description This parameter means the frequency range of UTRAN FDD cells.

Instance Cell

10562..10838,9662..9938,1162..1513,1537..1738,4357..4458,4387..441
3,2237..2563,2937..3088,9237..9387,3112..3388,3712..3812,412,437,4
62,487,512,537,562,587,612,637,662,687,1887,1912,1937,1962,1987,2
012,2037,2062,2087,1007,1012,1032,1037,1062,1087,1037,1062,2587,
2612,2637,2662,2687,2712,2737,2762,2787,2812,2837,2862,2887,291
Value Range and Step 2,3412,3437,3462,3487,3512,3537,3562,3587,3612,3637,3662,3687

Unit N/A

Default Value 0

2-493

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features ZGO-02-03-009 GSM/WCDMA Interworking Phase II

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.8 Scrambling code


Full Name Scrambling code

Abbreviation scCode

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

Description This parameter indicates the scrambling of UTRAN FDD cells.

Instance External Utran Neighbor Cell

Value Range and Step 0..511,65535

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

2-494

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.9 TX diversity indication


Full Name TX diversity indication

Abbreviation diversity

Managed Object External UTRAN FDD Cell Configuration

Diversity 44.018\
3GPP Name Diversity TDD25.224

3GPP Reference 3GPP TS 44.018

This parameter determines whether UTRAN adjacent cell uses transmis-


Description sion diversity.

Instance External Neighbor Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, Tx diversity is not used.

Configuration Rule and This parameter should be set according to adjacent


Adjustment Suggestion 3G cells.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

2-495

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.10 RAC (RAC)


Full Name RAC (RAC)

Abbreviation rac

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

RAC is a composition part of Routing Area Identity (RAI). RAI defines the
GPRS serving cell identification. GPRS system divides the location area
(LAs) to several routing areas (RAs) using RAI (MCC+MNC+LAC+RAC).
Routing Area (RA) distribution, similar to GSM system, uses the location
area to manage a group of cells. MS initiates Routing area update
procedure in cell reselection mode if new RAI differs from old RAI during
cell reselection.
SGSN knows the routing area information of the MS in the standby
status. Then, when the network has packet data or circuit data to
transmit, it will page the MS in that routing area. RAI cannot span more
than one SGSN.
Description This parameter is consistent with the data at CN side.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

2-496

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.11.11 Whether an external 3G cell is included in GSM system.


Full Name Whether an external 3G cell is included in GSM system.

Abbreviation inner3GNcell

Managed Object External UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Whether an external 3G cell is included in GSM system.

Instance External

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

2-497

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12 External UTRAN TDD Cell


Configuration(GExternalUtranCellTDDLcr)
2.12.1 External UTRAN TDD Cell ID
Full Name External UTRAN TDD Cell ID

Abbreviation GExternalUtranCellTDDLcr

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description External UTRAN TDD Cell ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-498

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12.2 CI
Full Name CI

Abbreviation ci

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

To distinguish each cell in GSM PLMN uniquely, the network operator


Description allocates a unique code for each cell in a location area.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-499

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12.3 MCC
Full Name MCC

Abbreviation mcc

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

MCC consists of three digits of decimal number. It is used to uniquely


Description identify the home country of the mobile user (or system).

Instance External Utran Neighbor Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-500

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12.4 MNC
Full Name MNC

Abbreviation mnc

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

MNC consists of three digits of decimal number. It uniquely identifies a


Description specific PLMN network in a country (determined by MCC).

Instance External Utran Neighbor Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-501

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12.5 RNC ID
Full Name RNC ID

Abbreviation rnc_id

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

Each RNC has a unique number in the UTRAN network of PLMN to route
Description corresponding UTRAN interface message correctly.

Instance External Utran Neighbor Cell

Value Range and Step 0..4095

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-502

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.12.6 LAC (LAC)


Full Name LAC (LAC)

Abbreviation lac

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 48.008

Each GSM PLMN is divided into many location areas (LAs) in order to
determine the MS location, the location area code identifies the different
location areas. LAC comes under LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description This parameter is consistent with the data at CN side.

Instance External Utran Neighbor Cell

Value Range and Step 1..65533, 65535

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-503

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.12.7 UTRAN cell frequency


Full Name UTRAN cell frequency

Abbreviation arfcn3g

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

Description This parameter means the frequency range of UTRAN adjacent cell.

Instance External Utran Neighbor Cell

{bandWidth3g==0}[9512..9588][10062..10113][9262..9538][9662..9938][
9562..9638][12862..13088][2112][2137][2162][2187][2212][2237][2262][
2287][2312][2337],
{bandWidth3g==1}[9504..9596][10054..10121][9254..9546][9654..9946][
Value Range and Step 9554..9646][12854..13096][11504..11996]

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-504

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.12.8 UTRAN TDD cell parameter


Full Name UTRAN TDD cell parameter

Abbreviation CellPara

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

Description Cell parameter of UTRAN TDD cells.

Instance External Utran Neighbor Cell

Value Range and Step 0..127, 65535

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-505

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.12.9 TX diversity indication


Full Name TX diversity indication

Abbreviation diversity

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter determines whether UTRAN adjacent cell uses transmis-


Description sion diversity.

Instance External Utran Neighbor Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.12.10 RAC (RAC)


Full Name RAC (RAC)

2-506

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation rac

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

RAC is a composition part of Routing Area Identity (RAI). RAI defines


the GPRS serving cell identification. GPRS system divides the location
area (LAs) to several routing areas (RAs) using RAI
(MCC+MNC+LAC+RAC). Routing Area (RA) distribution, simi-
lar to GSM system, uses the location
area to manage a group of cells. MS initiates Routing area update
procedure in cell reselection mode if new RAI differs from old RAI during
cell reselection.
SGSN knows the routing area information of the MS in the standby
status. Then, when the network has packet data or circuit data to
transmit, it will page the MS in that routing area. RAI cannot span more
than one SGSN.
Description This parameter is consistent with the data at CN side.

Instance External Utran Neighbor Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-507

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.12.11 UTRAN adjacent cell bandwidth


Full Name UTRAN adjacent cell bandwidth

Abbreviation bandWidth3g

Managed Object External UTRAN TDD Cell Configuration

3GPP Name Bandwidth_TDD25.331

3GPP Reference 3GPP TS 44.018

When CellType3G is set to "TDD", this parameter appears and can be


Description set, indicating the bandwidth of the selected adjacent UTRAN cell.

Instance External Neighbor Cell

0: 3.84Mcps
Value Range and Step 1: 1.28Mcps

Unit N/A

Default Value 1

Default Value
Configuration Reason The value 3.84 Mcps is not used any more.

Configuration Rule and This parameter should be set according to adjacent


Adjustment Suggestion 3G cells.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-508

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.12.12 Apply Sync Case / Apply TSTD


Full Name Apply Sync Case / Apply TSTD

Abbreviation syncCaseTstd

Managed Object External UTRAN TDD Cell Configuration

Sync Case TSTD


3GPP Name 25.30425.224

3GPP Reference 3GPP TS 44.018

This parameter decides whether to use SyncCase or TSTD. TSTD refers


to time switched transmit diversity. SyncCase refers to synchronization
Description mode is not used currently.

Instance External Neighbor Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value varies with applications.

Configuration Rule and This parameter should be set according to adjacent


Adjustment Suggestion 3G cells.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-509

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.12.13
Whether an external 3G cell is included in
GSM system.
Whether an external 3G cell is included in
Full Name GSM system.

Abbreviation inner3GNcell

Managed Object External UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Whether an external 3G cell is included in GSM system.

Instance External Utran Neighbor Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-510

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.13 External E-UTRAN FDD Cell


Configuration(GExternalEutranCellFDD)
2.13.1 External E-UTRAN FDD Cell Configuration ID
Full Name External E-UTRAN FDD Cell Configuration ID

Abbreviation GExternalEutranCellFDD

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description External E-UTRAN FDD Cell Configuration ID

Instance None

Value Range and Step 1..65535

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-511

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.13.2 MCC
Full Name MCC

Abbreviation mcc

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

MCC consists of three digits of decimal number. It is used to uniquely


Description identify the home country of the mobile user (or system).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.3 MNC
Full Name MNC

Abbreviation mnc

2-512

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

MNC consists of three digits of decimal number. It uniquely identifies a


Description specific PLMN network in a country (determined by MCC).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters MNCBcdCodeLen

If MNC3Digits is set to two digits, the mobile network number can only
be two digits of decimal number. If MNC3Digits is set to three digits, the
Relationship mobile network number can only be three digits of decimal number. If
MNC3Digits is set to two or three digits, the mobile network number can
only be two or three digits of decimal number.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.4 EUTRAN NODEB Identification


Full Name EUTRAN NODEB Identification

Abbreviation enbId

2-513

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name eNB

3GPP Reference 3GPP TS 36413

Description This parameter determines the ID of an LTE cell.

Instance Cell

Value Range and Step 0..1048575

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

If ENBInd is 0, it indicates the macro base station and this parameter


Relationship value is 0~FFFFF. If ENBInd is 1, it indicates the household base station
and this parameter value is 0~FFFFFFF.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.5 Physical layer cell identity of LTE CELL


Full Name Physical layer cell identity of LTE CELL

Abbreviation PCID

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name PCID

2-514

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 36211

Description This parameter determines the physical ID of an LTE cell.

Instance Cell

Value Range and Step 0..503

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.6 specified EARFCN of E-UTRAN cells


Full Name specified EARFCN of E-UTRAN cells

Abbreviation ArfcnLTE

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name EARFCN

3GPP Reference 3GPP TS 36104

Description This parameter determines the frequency of an adjacent LTE cell.

Instance Cell

Value Range and Step 0..65535

2-515

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.7 Tracking area code


Full Name Tracking area code

Abbreviation TAC

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name TAC

3GPP Reference 3GPP TS 23401

Description This parameter determines the ID of a trace cell.

Instance Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason None

2-516

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.8 The attribute of LTE NodeB


Full Name The attribute of LTE NodeB

Abbreviation ENBInd

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 36413

Description This parameter determines the attribute of an LTE NodeB.

Instance Cell

0: Macro eNB
Value Range and Step 1: Home eNB

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

2-517

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.9 the minimum value of the channel bandwidth


Full Name the minimum value of the channel bandwidth

Abbreviation measureBandwidth

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 36104

This parameter specifies the minimum bandwidth of an LTE neighbor


channel. It indicates the number of resource blocks that can be mea-
Description sured by the MS.

Instance Cell

0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
Value Range and Step 7: reserved

Unit N/A

Default Value 5

Default Value
Configuration Reason None

2-518

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.13.10 EUTRAN CELL Identification


Full Name EUTRAN CELL Identification

Abbreviation EUTRANID

Managed Object External E-UTRAN FDD Cell Configuration

3GPP Name eNB

3GPP Reference 3GPP TS 36413

Description EUTRAN cell ID

Instance Cell

{ENBInd==0}[0],
Value Range and Step {ENBInd==1}[0..255]

Unit N/A

Default Value NA

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

2-519

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

If the ENBInd parameter is set to 0, it represents macro base station,


and the value range of the enbId parameter is 0-FFFFF. If the ENBInd
Relationship
parameter is set to 1, it represents home base station, and the value
range of the enbId parameter is 0-FFFFFFF.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN FDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14 External UTRAN FDD Cell CRRM


Configuration(GCrrmNCellLdFDD)
2.14.1 External UTRAN FDD Cell CRRM ID
Full Name External UTRAN FDD Cell CRRM ID

Abbreviation GCrrmNCellLdFDD

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

Description External UTRAN FDD Cell CRRM ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

2-520

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.2 Cs Remained User Num Low Threshold


Full Name Cs Remained User Num Low Threshold

Abbreviation csRemUserLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible CS subscribers in an FDD
Description neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 5

Default Value
Configuration Reason general value

2-521

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the threshold is high, services are difficult to be handed over to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the handover is easy to be
Adjustment Suggestion
implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.3 Ps Remained User Num Low Threshold


Full Name Ps Remained User Num Low Threshold

Abbreviation psRemUserLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible PS subscribers in an FDD
Description neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 5

Default Value
Configuration Reason general value

2-522

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the threshold is high, services are difficult to be reselected to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the reselection is easy to
Adjustment Suggestion
be implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.4 Cs Remained User Num Medium Threshold


Full Name Cs Remained User Num Medium Threshold

Abbreviation csRemUserMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible CS subscribers in an FDD
Description neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 10

Default Value
Configuration Reason general value

2-523

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the threshold is high, services are difficult to be handed over to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the handover is easy to be
Adjustment Suggestion
implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.5 Ps Remained User Num Medium Threshold


Full Name Ps Remained User Num Medium Threshold

Abbreviation psRemUserMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible PS subscribers in an FDD
Description neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 10

Default Value
Configuration Reason general value

2-524

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the threshold is high, services are difficult to be reselected to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the reselection is easy to
Adjustment Suggestion
be implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.6 Uplink Load Low Threshold


Full Name Uplink Load Low Threshold

Abbreviation ulLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-525

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.7 Uplink Load Medium Threshold


Full Name Uplink Load Medium Threshold

Abbreviation ulLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-526

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.8 Uplink Load High Threshold


Full Name Uplink Load High Threshold

Abbreviation ulLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-527

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.9 Downlink Load Low Threshold


Full Name Downlink Load Low Threshold

Abbreviation dlLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-528

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.10 Downlink Load Medium Threshold


Full Name Downlink Load Medium Threshold

Abbreviation dlLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-529

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.11 Downlink Load High Threshold


Full Name Downlink Load High Threshold

Abbreviation dlLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-530

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.12 Real Time Uplink Load Low Threshold


Full Name Real Time Uplink Load Low Threshold

Abbreviation ulRtLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-531

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.13 Real Time Uplink Load Medium Threshold


Full Name Real Time Uplink Load Medium Threshold

Abbreviation ulRtLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-532

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.14 Real Time Uplink Load High Threshold


Full Name Real Time Uplink Load High Threshold

Abbreviation ulRtLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-533

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.15 Real Time Downlink Load Low Threshold


Full Name Real Time Downlink Load Low Threshold

Abbreviation dlRtLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-534

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.16 Real Time Downlink Load Medium Threshold


Full Name Real Time Downlink Load Medium Threshold

Abbreviation dlRtLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-535

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.17 Real Time Downlink Load High Threshold


Full Name Real Time Downlink Load High Threshold

Abbreviation dlRtLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-536

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.18 Not Real Time Uplink Load Low Threshold


Full Name Not Real Time Uplink Load Low Threshold

Abbreviation ulNRtLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-537

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.19 Not Real Time Uplink Load Medium Threshold


Full Name Not Real Time Uplink Load Medium Threshold

Abbreviation ulNRtLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-538

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.20 Not Real Time Uplink Load High Threshold


Full Name Not Real Time Uplink Load High Threshold

Abbreviation ulNRtLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-539

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.21 Not Real Time Downlink Load Low Threshold


Full Name Not Real Time Downlink Load Low Threshold

Abbreviation dlNRtLoadLowThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an FDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-540

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.22 Not Real Time Downlink Load Medium Threshold


Full Name Not Real Time Downlink Load Medium Threshold

Abbreviation dlNRtLoadMidThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an FDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-541

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.14.23 Not Real Time Downlink Load High Threshold


Full Name Not Real Time Downlink Load High Threshold

Abbreviation dlNRtLoadHighThs

Managed Object External UTRAN FDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an FDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-542

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN FDD Cell Configuration-
>External UTRAN FDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15 External UTRAN TDD Cell CRRM


Configuration(GCrrmNCellLdTDDLcr)
2.15.1 External UTRAN TDD Cell CRRM ID
Full Name External UTRAN TDD Cell CRRM ID

Abbreviation GCrrmNCellLdTDDLcr

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

Description External UTRAN TDD Cell CRRM ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

2-543

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.2 Cs Remained User Num Low Threshold


Full Name Cs Remained User Num Low Threshold

Abbreviation csRemUserLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether a 3G TDD external cell is an internal


cell of a dual-mode controller. Configure this parameter for dual-mode
Description GSM/TD-SCDMA controllers.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 5

Default Value
Configuration Reason general value

2-544

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the threshold is high, services are difficult to be handed over to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the handover is easy to be
Adjustment Suggestion
implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.3 Ps Remained User Num Low Threshold


Full Name Ps Remained User Num Low Threshold

Abbreviation psRemUserLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible PS subscribers in an TDD
Description neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 5

Default Value
Configuration Reason general value

2-545

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the threshold is high, services are difficult to be reselected to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the reselection is easy to
Adjustment Suggestion
be implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.4 Cs Remained User Num Medium Threshold


Full Name Cs Remained User Num Medium Threshold

Abbreviation csRemUserMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible CS subscribers in an TDD
Description neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 10

Default Value
Configuration Reason general value

2-546

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the threshold is high, services are difficult to be handed over to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the handover is easy to be
Adjustment Suggestion
implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.5 Ps Remained User Num Medium Threshold


Full Name Ps Remained User Num Medium Threshold

Abbreviation psRemUserMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


whether the remaining number of accessible PS subscribers in an TDD
Description neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 10

Default Value
Configuration Reason general value

2-547

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the threshold is high, services are difficult to be reselected to the


Configuration Rule and
FDD neighbor cell. If the threshold is low, the reselection is easy to
Adjustment Suggestion
be implemented.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.6 Uplink Load Low Threshold


Full Name Uplink Load Low Threshold

Abbreviation ulLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-548

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.7 Uplink Load Medium Threshold


Full Name Uplink Load Medium Threshold

Abbreviation ulLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-549

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.8 Uplink Load High Threshold


Full Name Uplink Load High Threshold

Abbreviation ulLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the UL load of an TDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-550

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.9 Downlink Load Low Threshold


Full Name Downlink Load Low Threshold

Abbreviation dlLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-551

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.10 Downlink Load Medium Threshold


Full Name Downlink Load Medium Threshold

Abbreviation dlLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-552

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.11 Downlink Load High Threshold


Full Name Downlink Load High Threshold

Abbreviation dlLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the DL load of an TDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-553

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.12 Real Time Uplink Load Low Threshold


Full Name Real Time Uplink Load Low Threshold

Abbreviation ulRtLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-554

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.13 Real Time Uplink Load Medium Threshold


Full Name Real Time Uplink Load Medium Threshold

Abbreviation ulRtLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-555

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.14 Real Time Uplink Load High Threshold


Full Name Real Time Uplink Load High Threshold

Abbreviation ulRtLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time UL load of an TDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-556

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.15 Real Time Downlink Load Low Threshold


Full Name Real Time Downlink Load Low Threshold

Abbreviation dlRtLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-557

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.16 Real Time Downlink Load Medium Threshold


Full Name Real Time Downlink Load Medium Threshold

Abbreviation dlRtLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-558

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.17 Real Time Downlink Load High Threshold


Full Name Real Time Downlink Load High Threshold

Abbreviation dlRtLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the real-time DL load of an TDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-559

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.18 Not Real Time Uplink Load Low Threshold


Full Name Not Real Time Uplink Load Low Threshold

Abbreviation ulNRtLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-560

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.19 Not Real Time Uplink Load Medium Threshold


Full Name Not Real Time Uplink Load Medium Threshold

Abbreviation ulNRtLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-561

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.20 Not Real Time Uplink Load High Threshold


Full Name Not Real Time Uplink Load High Threshold

Abbreviation ulNRtLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time UL load of an TDD neighbor cell is high.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-562

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.21 Not Real Time Downlink Load Low Threshold


Full Name Not Real Time Downlink Load Low Threshold

Abbreviation dlNRtLoadLowThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an TDD neighbor cell is low.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-563

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.22 Not Real Time Downlink Load Medium Threshold


Full Name Not Real Time Downlink Load Medium Threshold

Abbreviation dlNRtLoadMidThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an TDD neighbor cell is medium.

Instance External Utran Neighbor Cell

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

2-564

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.15.23 Not Real Time Downlink Load High Threshold


Full Name Not Real Time Downlink Load High Threshold

Abbreviation dlNRtLoadHighThs

Managed Object External UTRAN TDD Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a threshold used by a GSM network to determine


Description whether the non-real-time DL load of an TDD neighbor cell is high.

Instance Utran

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

2-565

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When FDD load is not high and FDD is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path Resource Configuration->External UTRAN TDD Cell Configuration-
>External UTRAN TDD Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16 External E-UTRAN TDD Cell


Configuration(GExternalEutranCellTDD)
2.16.1 External E-UTRAN TDD Cell Configuration ID
Full Name External E-UTRAN TDD Cell Configuration ID

Abbreviation GExternalEutranCellTDD

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description External E-UTRAN TDD Cell Configuration ID

Instance None

Value Range and Step 1..65535

Unit N/A

Default Value N/A

2-566

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.2 MCC
Full Name MCC

Abbreviation mcc

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

MCC consists of three digits of decimal number. It is used to uniquely


Description identify the home country of the mobile user (or system).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

2-567

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.3 MNC
Full Name MNC

Abbreviation mnc

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference N/A

MNC consists of three digits of decimal number. It uniquely identifies a


Description specific PLMN network in a country (determined by MCC).

Instance Cell

Value Range and Step 0..999

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters MNCBcdCodeLen

2-568

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If MNC3Digits is set to two digits, the mobile network number can only
be two digits of decimal number. If MNC3Digits is set to three digits, the
Relationship mobile network number can only be three digits of decimal number. If
MNC3Digits is set to two or three digits, the mobile network number can
only be two or three digits of decimal number.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.4 EUTRAN NODEB Identification


Full Name EUTRAN NODEB Identification

Abbreviation enbId

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name eNB

3GPP Reference 3GPP TS 36413

Description This parameter determines the ID of an LTE cell.

Instance Cell

Value Range and Step 0..1048575

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-569

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If ENBInd is 0, it indicates the macro base station and this parameter


Relationship value is 0~FFFFF. If ENBInd is 1, it indicates the household base station
and this parameter value is 0~FFFFFFF.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.5 Physical layer cell identity of LTE CELL


Full Name Physical layer cell identity of LTE CELL

Abbreviation PCID

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name PCID

3GPP Reference 3GPP TS 36211

Description This parameter determines the physical ID of an LTE cell.

Instance Cell

Value Range and Step 0..503

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

2-570

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.6 specified EARFCN of E-UTRAN cells


Full Name specified EARFCN of E-UTRAN cells

Abbreviation ArfcnLTE

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name EARFCN

3GPP Reference 3GPP TS 36104

Description This parameter determines the frequency of an adjacent LTE cell.

Instance Cell

Value Range and Step 0..65535

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-571

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.16.7 Tracking area code


Full Name Tracking area code

Abbreviation TAC

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name TAC

3GPP Reference 3GPP TS 23401

Description This parameter determines the ID of a trace cell.

Instance Cell

Value Range and Step 0..65535

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-572

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.16.8 The attribute of LTE NodeB


Full Name The attribute of LTE NodeB

Abbreviation ENBInd

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 36413

Description This parameter determines the attribute of an LTE NodeB.

Instance Cell

0: Macro eNB
Value Range and Step 1: Home eNB

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-573

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.16.9 the minimum value of the channel bandwidth


Full Name the minimum value of the channel bandwidth

Abbreviation measureBandwidth

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name NRB

3GPP Reference 3GPP TS 36104

This parameter specifies the minimum bandwidth of an LTE neighbor


channel. It indicates the number of resource blocks that can be mea-
Description sured by the MS.

Instance Cell

0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
Value Range and Step 7: reserved

Unit N/A

Default Value 5

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-574

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.16.10 EUTRAN CELL Identification


Full Name EUTRAN CELL Identification

Abbreviation EUTRANID

Managed Object External E-UTRAN TDD Cell Configuration

3GPP Name eNB

3GPP Reference 3GPP TS 36413

Description EUTRAN cell ID

Instance Cell

{ENBInd==0}[0],
Value Range and Step {ENBInd==1}[0..255]

Unit N/A

Default Value NA

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

If the ENBInd parameter is set to 0, it represents macro base station,


and the value range of the enbId parameter is 0-FFFFF. If the ENBInd
Relationship
parameter is set to 1, it represents home base station, and the value
range of the enbId parameter is 0-FFFFFFF.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->External


OMC Access Path
Resource Configuration->External E-UTRAN TDD Cell Configuration

Parameter Modifying
Version N/A

2-575

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17 GSM Cell Configuration(GGsmCell)


2.17.1 GSM Cell Configuration ID
Full Name GSM Cell Configuration ID

Abbreviation GGsmCell

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description GSM Cell Configuration ID

Instance None

Value Range and Step 1..108

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-576

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.2 CI
Full Name CI

Abbreviation cellIdentity

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Network operators must allocate a unique code to each cell in a location


Description area to identify every cell.

Instance Cell

Value Range and Step 0..65535

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.3 NCC
Full Name NCC

Abbreviation ncc

2-577

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

NCC is one of the composition parts of Base Station ID Code (BSIC)


(BSIC = NCC + BCC). which is used to enable the MS to distinguish ad-
jacent and different GSM PLMN cells. Normally, adjacent operators shall
have different NCCs. The parameter related to NCC is NccPermitted of
the cell. By prohibiting MS to report related NCC in the cell, MS is pro-
hibited to measure the cell information of the related operators. Actually,
NCC occupies three bits. NCC is one of the network identification param-
Description eters.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.4 BCC
Full Name BCC

2-578

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation bcc

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

BCC is one of the composition parts of Base Station ID Code (BSIC) (BSIC
= NCC + BCC). Normally, BCC is used to enable MS to distinguish ad-
jacent cells with the same BCCH carrier frequency and belonging to the
same GSM PLMN. In addition, the GSM specifications stipulate that the
TSC (Training Sequence Code) of the broadcast control channel of a cell
shall be equal to the cell BCC. BCC occupies three bits BCC is one of the
Description network identification parameters.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-579

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.5 TSC
Full Name TSC

Abbreviation tsc

Managed Object GSM Cell Configuration

3GPP Name TSC

3GPP Reference N/A

This parameter represents Training Serial Code (TSC) of the timeslot.


There are eight types of TSC, with low mutual dependency. It is used for
reference of delay compensation for adaptive balance circuit at receiving
side. For the timeslot where BCCH is, this parameter must be equal to
Description BCC of the cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-580

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.6 MIN received signal level to access


Full Name MIN received signal level to access

Abbreviation rxLevAccessMin

Managed Object GSM Cell Configuration

3GPP Name RXLEV_ACCESS_MIN

3GPP Reference 3GPP TS 45.008

To prevent the MS from accessing the system at a low receiving signal


level (usually, the poor communication quality cannot guarantee normal
communications after access), and from unreasonably wasting the radio
sources of network, it is prescribed in the GSM system that the receiving
level be greater than a threshold for MS to access the network, that is,
MS Min RxLev to Access (the minimum receiving level for the MS to
access the network).
In addition, it is one of the criteria for MS to select and reselect the cell.
The parameter will be broadcast to all MSs in a cell through the
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages.
MIN received signal level to access is one of the cell selection
parameters. Recommended value is usually approximated according
to MS receiving sensitivity.
When network observes uneven traffic distribution in certain cells, MIN
received signal level to access increases the resulting C1 and
C2 to decrease the cell effective coverage range. However, the value of
this parameter cannot be too large. Otherwise, large value change
can bring void area across cell boundaries to result in sudden call
drop problem.
With this measure for traffic balance, it is suggested that the level value
should not exceed -90 dBm. Define the parameter value to 10 (that is,
from -101 dBm ~ -100 dBm) at initial network rollout stage or lower,
which is higher than the receiving sensitivity of MS (that is, -102 dBm).
However, the 2 dB increase in parameter value is allowable in situations
Description where network coverage is not a problem.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 10

Default Value
Configuration Reason Coverage under the general wireless environment to determine

2-581

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The value can be slightly adjusted based on the actual condition. It


Configuration Rule and should be no greater than 15.
Adjustment Suggestion If the value is increased, the effective coverage range will be reduced,
which helps improve the access success rate but reduces call drop rate.

Change Mode Offline

Related features ZGB-02-02-007 Support of C1 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.7 Control channel MAX power level


Full Name Control channel MAX power level

Abbreviation msTxPwrMaxCCH

Managed Object GSM Cell Configuration

3GPP Name MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

During the communication between MS and BTS, the transmission


power is controlled by the network. The network sets the power for
MS through the power command and the command is transmitted on
SACCH (SACCH has 2 header bytes, one is the power control byte and
the other is the timing advance byte).
MS must extract the power control header from downward SACCH and
takes the specified transmission power as output power. If the power
level of MS cannot output the power value, it will output the closest
transmission power that can be output.
For SACCH is Channel Associated Signaling and it has to be used
together with SCCCH and TCH, so the power control of MS starts after
Description
MS receives SACCH.

2-582

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The power of MS before receiving SACCH (that is the power when


sending channel request on RACH) is determined by Control channel
MAX power level.
Control channel MAX power level is one of the cell selection and
reselection parameters of MS, involving calculation of C1 and C2 values.
This parameter is broadcasted to all MS in the cell via RIL3_RR
SYSTEM INFORMATION TYPE3 and TYPE4.
Refer to appendix C, for the maximum power before MS receives the
power control information.
If this parameter is set too large, the MS near BTS will interfere the
adjacent channels. If it is too small, the MS at the cell boundaries will
have low access success rate.
The principle of setting this parameter is as follows: Under the
precondition that the MS at the cell boundary is guaranteed with a
certain access success rate, the MS access level should be reduced as
much as possible. Generally, it is recommended to set this parameter as
5 (for GSM900MS) and 0 (for GSM1800MS).
In practice, after setting this parameter, perform dialing test at the cell
edge, increase or decrease the value of this parameter according to the
MS access success rate and access time tested with different parameter
setup.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Maximum power of the majority of mobile phone

The default value is reserved. If the it is set too large, the MS near BTS
will interfere the adjacent channels. If it is too small, the MS at the cell
boundaries will have low access success rate.
The principle for setting the parameter value is: Under the precondition
Configuration Rule and
that the MS at the cell boundary is guaranteed with a certain access
Adjustment Suggestion
success rate, the MS access level should be reduced as much as
possible.Obviously, the larger the cell coverage is, the higher is the
output power level of the MS. Usually, it is recommended to set this
parameter value as 5 (for GSM900MS) and 0 (for GSM1800MS).

Change Mode Offline

Related features ZGB-02-02-007 Support of C1 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

2-583

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.8 NCC permitted


Full Name NCC permitted

Abbreviation plmnPermitted

Managed Object GSM Cell Configuration

3GPP Name NCC Permitted

3GPP Reference 3GPP TS 44.018

Working in the dedicated mode, a mobile station reports the signal quality
to BTS. Each time the report can contain up to six neighbor cells. Ensure
the report include the cells that are most likely to become the target cell
during switchover. Configure the MS to measure the cells with certain
network color codes. NccPermitted lists the NCC for the cells to be mea-
sured by the MS. If the measured NCC is in the list, the corresponding
Description cell will be reported to the BTS.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value [1,1,1,1,1,1,1,1]

Default Value
Configuration Reason In accordance with the configuration required to set the scene

Configuration Rule and If no special requirement, this parameter should


Adjustment Suggestion not be modified.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-584

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.9 GPLMN DN
Full Name GPLMN DN

Abbreviation refGMPlmn

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Quoted GPLMN DN

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-585

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.10 LocationArea DN
Full Name LocationArea DN

Abbreviation refGLocationArea

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Quoted Location Area DN

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according to radio parameter


Configuration Reason planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-586

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.17.11 Cell Sequence


Full Name Cell Sequence

Abbreviation GGsmCellSeq

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Cell Identity

Instance None

Value Range and Step 1..108

Unit N/A

Default Value NA

Default Value
Configuration Reason No default value is available.

Configuration Rule and


Adjustment Suggestion Set this parameter based on the on-site cell planning

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-587

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.12 BCCH arfcn


Full Name BCCH arfcn

Abbreviation bcchFrequency

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the ARFCN of the BCCH carrier in the cell.

Instance Cell

Value Range and Step 0..1023

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.13 Common control channel configuration


Full Name Common control channel configuration

Abbreviation CcchConf

Managed Object GSM Cell Configuration

2-588

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name CCCH-CONF

3GPP Reference 3GPP TS 44.018

Common control channel configuration is one of the system control


parameters. In GSM system, CCCH includes Access Grant Channel
(AGCH) and Paging Channel (PCH). It is used to send access granting
(that is instant assignment) message and paging message.
In each cell, all service channels share CCCH. According to the
configuration of the service channel in the cell and the traffic mode of the
cell, CCCH could be one or more than one physical channel, and CCCH
could share the same physical channel with SDCCH . The
combination mode of the common control channel in cell depends
on CCCH configuration parameter and it should be consistent with
the actual configuration of cell CCH. It could be observed from this
parameter:
BS_CC_CHANS (Number of CCCH); BS_CCCH_SDCCH_COMB (If
combined with SDCCH).
This parameter is broadcasted to all MSs in the cell by message
Description RIL3_RR SYSTEM INFORMATION TYPE3.

Instance Cell

0: CCCH uses one physical channel, not combined with SDCCH


1: CCCH uses one physical channel, combined with SDCCH
2: CCCH uses two physical channels, not combined with SDCCH
4: CCCH uses three physical channels, not combined with SDCCH
Value Range and Step 6: CCCH uses four physical channels, not combined with SDCCH

Unit N/A

Default Value 0

Default Value In most cases there are more than two carrier frequencies in a cell. A
Configuration Reason single SDCCH channel is needed.

The setting of this parameter depends on the traffic load of the location
area that the cell resides. 0 can be the default value (must be consistent
with the configurations of the public control channels). It is recommended
Configuration Rule and that this value should be identical for the cells in the same local area.
Adjustment Suggestion The configuration of CCCH depends on experience: When a cell has
one or two TRXs, a basic physical channel shared with SDCCH is
recommended. When a cell has three or four TRXs, a basic physical
channel not shared with SDCCH is configured.

Change Mode Offline

Related features ZGB-03-02-001 Support of SDCCH/4 and SDCCH/8

Related Parameters tsChannelComb

2-589

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When CcchConf is set as "CCCH uses one physical channel, combined


with SDCCH", the rtimeslot channel combination type of timeslot 0 in
the channel information parameter must be either of the following:
BCCH+SDCCH/4, BCCH+SDCCH/4+CBCH.
When CcchConf is set as "CCCH uses one physical channel, not
combined with SDCCH", the rtimeslot channel combination type of
timeslot 0 in the channel information parameter must be either of the
following: FCCH+SCH+BCCH+CCCH, BCCH+CCCH.
When CcchConf is set as "CCCH uses two physical channels, not
combined with SDCCH", the rtimeslot channel combination type of
Relationship
timeslots 0 and 2 in the channel information parameter must be the
following: FCCH+SCH+BCCH+CCCH, BCCH+CCCH.
When CcchConf is set as "CCCH uses three physical channels, not
combined with SDCCH", the rtimeslot channel combination type of
timeslots 0 , 2, and 4 in the channel information parameter must be the
following: FCCH+SCH+BCCH+CCCH, BCCH+CCCH.
When CcchConf is set as "CCCH uses four physical channels, not
combined with SDCCH", the rtimeslot channel combination type of
timeslots 0 , 2, and 4 in the channel information parameter must be the
following: FCCH+SCH+BCCH+CCCH, BCCH+CCCH.

Related Interfaces Abis

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.14 PS Support
Full Name PS Support

Abbreviation PsSupport

Managed Object GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

2-590

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether this cell supports GPRS (EDGE) ser-
vice.If "GPRS supported" or "EDGE supported" is selected, relevant sub-
Description pages may appear on the interface.

Instance Cell

0: Not Support
1: GPRS
Value Range and Step 2: EDGE

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration based on actual demand

For the cell which does not support PS service, it is set as: Don't support
GPRS;
For the cell which only supports the GPRS service, it is set as: Support
GPRS;
Configuration Rule and
For the cell which supports the GPRS and EDGE services, it is set as:
Adjustment Suggestion
Support EDGE;
For the cell which supports the GPRS , EDGE and EDGE2 services, it is
set as: Support EDGE2.
The V2 80W BTS only supports CS1/2.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2.17.15 GRoutingArea DN
Full Name GRoutingArea DN

2-591

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation refGRoutingArea

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description DN in the routing area used to find the corresponding RAC

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.16 Number of blocks reserved for AGCH


Full Name Number of blocks reserved for AGCH

Abbreviation bsAgBlkRes

Managed Object GSM Cell Configuration

3GPP Name BS_AG_BLKS_RES

3GPP Reference N/A

2-592

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

CCCH includes Access Granted Channel and Paging Channel. The num-
ber of blocks in CCCH reserved for Access Granted Channel must be
configured. To let the MS know the configuration, the system message
sent by each cell will contain a parameter that can be regulated in terms
of the load on various kinds of public channels. The parameter is broad-
cast to each MS in a cell through the RIL3_RR SYSTEM INFORMATION
Description TYPE3 message.

Instance Cell

{si13Locate==0}[0..7],
Value Range and Step {si13Locate==1}[1..7]

Unit N/A

Default Value 1

Default Value
Configuration Reason "2" is a recommended value.

Configuration Rule and It is recommended that the values of this parameter for all the cells in
Adjustment Suggestion the same local area are identical.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.17 Number of multi-frames of the PCH


Full Name Number of multi-frames of the PCH

Abbreviation bsPaMframs

Managed Object GSM Cell Configuration

3GPP Name BS_PA_MFRMS

2-593

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

Number of multiframes of the PCH specifies the repeat cycle of PCH


group subchannel using multiple 51-MultiFrame structures. It is one
of the system control parameters.
According to GSM Specifications, a unique IMSI identifies MS and
paging group.
IMSI determines the PCH sub-channel for MS in a paging group.
In the actual network, MS only tunes in the paging sub-channel to
which it belongs and ignores the contents of other paging sub-channels,
and shuts off the power supply of some hardware equipment in the
MS to save the power overhead of MS. In other IDLE time, MS shuts
off the hardware equipment power supply to save power. Number of
multiframes of the PCH determines the number of paging sub-channels
of the paging
channel in a cell.
MS uses this parameter to find out its home paging group, so as to
monitor corresponding paging sub-channel. Network broadcasts the
parameter information to all MSs in the cell through the RIL3_RR
SYSTEM INFORMATION TYPE3 message. Number of multiframes of
Description the PCH is one of the system control parameters.

Instance Cell

Value Range and Step 2..9

Unit N/A

Default Value 5

Default Value This parameter should be set as low as possible and the paging channel
Configuration Reason should not be overloaded.

The larger this parameter is, the more the paging sub-channels in the
cell is, the less is the number of users on each paging sub-channel, the
longer is the duration of the MS battery, and the longer is the delay of
issueing paging messages.
In the operation network, the paging channel should be periodically
Configuration Rule and checked on overloading, to adjust this parameter value appropriately. In
Adjustment Suggestion general, this parameter value is 6 or 7 for the area with large traffic, 4 or
5 for the cell with modest traffic, and 2 or 3 for the cell with low traffic.
Any paging message in the same location area must be sent in all cells
in this location area, so the paging channel capacity (the number of
paging subchannels calculated for each cell) of each cell n the same
location area should be same or appropriate.

Change Mode Offline

Related features ZGB-02-01-001 paging

Related Parameters N/A

2-594

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.18 Early class-mark sending control


Full Name Early class-mark sending control

Abbreviation ecsc

Managed Object GSM Cell Configuration

3GPP Name Early Classmark Sending Control

3GPP Reference 3GPP TS44.018

According to GSM specification, MS transmits appended class mark


information (Classmark 3) to the network through the CLASSMARK
CHANGE message as soon as possible.
Early category classmark sending control determines if the network
supports ECSC function. Network broadcasts the parameter information
to MSs in the cell through RIL3_RR SYSTEM INFORMATION TYPE3
message.
If there is a cell in another frequency band in the adjacent cell for
handover or the current cell itself is extended GSM cell and the function
of early category classmark sending control is enabled, set ECSC as
Description Yes, otherwise set as No.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason Consider network optimization

2-595

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If there is another frequency band in the adjacent


Configuration Rule and cell for handover or the cell is an extended GSM cell and the network
Adjustment Suggestion supports the ECSC function, "ECSC" should be set as True. Otherwise,
it should be set to "Yes". Otherwise it should be set to "No".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.19 CBC support


Full Name CBC support

Abbreviation smsCBUsed

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

CBC service is an important service provided by mobile communication


system, mainly used to distribute information to the mobile subscribers
within certain geographical location area. The difference from P2P sms
service contains: receiver for P2P sms is specific mobile subscriber, but
receiver for CBC is all mobile subscribers within certain area, including
external subscribers roaming in this area.
This parameter identifies if this cell supports the function of cell
Description broadcasting short message.

Instance Cell

0: No
Value Range and Step 1: Yes

2-596

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Whether to enable this function depends on


Adjustment Suggestion the needs of operators.

Change Mode Offline

Related features N/A

Related Parameters tsChannelComb

If "CBC Supported (SmsCbUsed)" is No, that is, CBC is not supported,


the system automatically finds all time slot channel combinations in the
cell. If CBC channel exists, it is changed to SDCCH. SmsCbUsed
Relationship If "CBC Supported (SmsCbUsed)" is 'Yes', that is, CBC is supported,
the system automatically finds all time slot channel combinations in
the cell. If a non-BCCH channel is found for a carrier, it is changed to
SDCCH+CBCH.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.20 FreqBand
Full Name FreqBand

Abbreviation freqBand

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Frequency band supported by the serving cell.

Instance Cell

2-597

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
Value Range and Step 7: GSM850\(128..251\)(GSM850\(128..251\))

Unit N/A

Default Value NA

Default Value
Configuration Reason The value based on site condition

Configuration Rule and


Adjustment Suggestion It is configured as required.

Change Mode Offline

Related features ZGO-05-02-002 EGSM Frequency Band Support

Related Parameters FuncExt


arfcn

The value of DCS1800/PCS1900 supported (FuncExt) has influence on


Relationship the value range of this parameter.
This parameter value has influence on the value range of CaArfcnList.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.21 Cell type


Full Name Cell type

Abbreviation cellType

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-598

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the


Description type of a GERAN external cell.

Instance Cell

0: Umbrella Cell
1: Macro Cell
2: Micro Cell
3: Micro-micro Cell
Value Range and Step 4: Extended Cell

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to radio


Adjustment Suggestion network planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.22 MAX number of re-transmitting events times


Full Name MAX number of re-transmitting events times

Abbreviation maxRetrans

Managed Object GSM Cell Configuration

3GPP Name Max retrans

3GPP Reference 3GPP TS 44.018

2-599

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

An MS sends a channel request message to the network on the RACH


when initiating an immediate assignment procedure for location update,
starting a call, or responding to a paging message. Because the RACH
is an ALOHA channel, the network allows the MS to send multiple
channel request messages before receiving an immediate assignment
message to improve the access success ratio of the MS. The maximum
allowed number of channel request messages depends on the maximum
number of times that the RACH burst is retransmitted.
This parameter is a system control parameter, which is broadcast to
MSs in a cell through the RIL3_RR SYSTEM INFORMATION TYPE
1, 2, 2bis, 3, and 4.
For cells with light traffic and a radius longer than 3 km, this parameter
can be set to 3, meaning that the maximum allowed number of channel
request messages is 7.
For cells with general traffic and a radius shorter than 3 km, this
parameter can be set to 2, meaning that the maximum allowed number
of channel request messages is 4.
For microcells, the parameter value 1 is recommended, meaning that
the maximum allowed number of channel request messages is 2.
For microcells with heavy traffic and cells with traffic congestion, the
parameter value 0 is recommended, meaning that the maximum allowed
Description number of channel request messages is 1

Instance Cell

0: 1 times
1: 2 times
2: 4 times
Value Range and Step 3: 7 times

Unit N/A

Default Value 2

Default Value Appropriate increase in the number of attempts to increase the success
Configuration Reason rate of access

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-600

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.23 Number of slots to spread transmission


Full Name Number of slots to spread transmission

Abbreviation txInteger

Managed Object GSM Cell Configuration

3GPP Name Tx_integer

3GPP Reference 3GPP TS 44.018

Parameter used at the MS side. It belongs to the PRACH control and


RACH control parameters, and it is broadcast to the MS in the PSI1
message. Whenever establishing a new connection, MS sends a
channel request message to the network through PRACH/RACH
channel.
As PRACH/RACH is an ALOHA channel, to improve MS access success
rate, the network allows MS to send multiple channel request messages
before
receiving packet assignment message. If MS does not receive any
response for the previous channel request message, MS resends
channel request
message after waiting for a random period. Network uses S parameter
to determine random waiting time.
The timeslot interface between two channel request messages should
be valued randomly within {S,S+1,S+T-1}.
The relationship between S and T is as follows.
When T is 3, 8, 14, or 50, S is 55 (CCCH) or 41 (CCH/SDCCH).
When T is 4, 9, or 16, S is 76 (CCCH) or 52 (CCH/SDCCH).
When T is 5, 10, or 20, S is 109 (CCCH) or 58 (CCH/SDCCH).
When T is 6, 11, or 25, S is 163 (CCCH) or 86 (CCH/SDCCH).
Description When T is 7, 12, or 32, S is 217 (CCCH) or 115 (CCH/SDCCH).

Instance Cell

Value Range and Step 0..15

Unit N/A

2-601

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 14

Default Value Send to expand the interval to give sufficient time for processing the
Configuration Reason network side

The value 14 corresponds to the maximum value


Configuration Rule and
of retransmission interval. If no special requirement, it is recommended
Adjustment Suggestion
not to modify the parameter value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.24 Cell bar qualify


Full Name Cell bar qualify

Abbreviation cellBarQualify

Managed Object GSM Cell Configuration

3GPP Name CELL_BAR_QUALIFY

3GPP Reference 3GPP TS44.018

This parameter preferably selects certain cells in the cell selection


process according to capacity, traffic and functional difference in
overlapping areas.
This function can be implemented by configuring CellBarQualify.
CellBarQualify is used to limit cell priority in special case. Network
broadcasts the parameter information to all MSs in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. It
is one of the cell selection parameters. The validity of this parameter
Description depends upon cell reselection parameter indication.

2-602

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Select No for Cell Bar Access and No for Cell bar qualify, that is, the
cell priority is defined as Normal. MS preferably enter
some types of cells. Set the priority of this cell type as Normal, while
the priorities of other cells to Low. In some cases, such
as micro cellular application, and dual-frequency networking, this setting
will not affect the cell reselection.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Usually the cell has a normal priority.

Operators can set the priorities of some cells


Configuration Rule and
to "Normal", and set some to "Low". And the "normal" priority cells
Adjustment Suggestion
should be made to take services as many as possible.

Change Mode Offline

Related features ZGB-02-02-007 Cell Selection

Related Parameters CellBarAccess

The following describes the meaning corresponding to the value of


CellBarQualify and CellBarAccess:
CellBarQualify=0CellBarAccess=0: Cell selection priority is normal,
and cell reselection state is normal.
CellBarQualify=0CellBarAccess=1: Cell selection priority is barred,
Relationship
and cell reselection state is barred.
CellBarQualify=1CellBarAccess=0: Cell selection priority is low, and
cell reselection state is normal.
CellBarQualify=1CellBarAccess=1: Cell selection priority is low, and
cell reselection state is normal.

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-603

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.25 Cell bar access


Full Name Cell bar access

Abbreviation cellBarAccess

Managed Object GSM Cell Configuration

3GPP Name CELL_BAR_ACCESS

3GPP Reference 3GPP TS 23.022

PLMN carriers can determine if to allow MS to access a specific cell (for


example the cell in test or the cell for absorbing traffic only).
Network broadcasts Cell bar access information to MS in the cell through
Description RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4 messages.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason To be opened according to the site need

A cell can be accessed by default.


Configuration Rule and
If the access forbidden switch has been turned on, no MS can access
Adjustment Suggestion
this cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-604

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.26 Call re-establishment allowed


Full Name Call re-establishment allowed

Abbreviation callReestablish

Managed Object GSM Cell Configuration

3GPP Name RE

3GPP Reference 3GPP TS 44.018

For the call drop caused by radio link failure resulted from burst
interference or high building, MS could originate call re-establishment
process to restore the call. However, the network determines if to allow
reestablishment by enabling Call re-establishment allowed.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4, message.
Description Call re-establishment allowed is one of the network function parameters.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason To be opened according to the site need

The call reestablishment function can improve user experience,


but may increase the call drop rate. In addition, subscribers prefer
Configuration Rule and
hook-on instead of waiting for the resume of the call because the call
Adjustment Suggestion
reestablishment needs a long time. Generally, it is recommended to
disable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-605

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17.27 Emergency call allowed


Full Name Emergency call allowed

Abbreviation emergencyCall

Managed Object GSM Cell Configuration

3GPP Name Emergency Call allowed

3GPP Reference 3GPP TS44.018

Generally, a valid SIM card is required for any MS in GSM Network to


get various network services. But the operators could decide if to allow
MS emergency call service for the MS without SIM card or with SIM card
whose access level is disabled by current cell, for example the police
station. Select Yes for Emergency call allowed to enable this function.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4, message.
Call re-establishment allowed is one of the network function parameters.
No: Do not allow Emergency call for MSs whose access level is 0 ~ 9.
For the MSs whose access level is 11 ~ 15, if its corresponding
access control bit is T, the emergency call is also not allowed.
Yes: Allow emergency call for all MSs. GSM specifications define
emergency call phone number as 112, which is different from Chinese
emergency call, but 112 is generally connected to the automatic voice
service to inform the users about the number of various special services.
Description Hence, EC shall be set as No, that is to allow the emergency call.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

In some countries and regions, dialing the


emergency phone number can only get the information of emergency
Default Value
services
Configuration Reason
but not the actual emergency services. Therefore, this parameter can
be set to "No" to avoid unnecessary occupation of channels.

Configuration Rule and Enable or disable the emergency call function


Adjustment Suggestion according to the requirement of the local operator.

Change Mode Offline

2-606

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.28 Access Control


Full Name Access Control

Abbreviation accessControl

Managed Object GSM Cell Configuration

3GPP Name Access Control

3GPP Reference 3GPP TS44.018

All MSs in GSM system have an access class (15 classes in total).
The MSs that are in the class ranging between 0 and 9 are common
ones. The MSs that are in the class ranging between 11 and 15 are
special MSs (no access class 10). Therefore, the system can disable
the MSs with certain access classes to access the cell (for example
during the installation and commissioning or the congestion control).
This information can reach MS inside the cell in RIL3_RR SYSTEM
INFORMATION TYPE1, 2, 2bis, 3 and 4 messages through Access
control. It is also one of the system control parameters.
The degree of congestion for any CCCH or processor overload during
congestion control can be reduced by temporarily prohibiting one type or
multiple types of subscribers from accessing the system (for subscribers
of access levels 0 ~ 9). In general, the system shows the following
overload conditions:
RACH overload, which shall be found in the "CCCH LOAD INDICATION"
message and processed by BSS according to the standard GSM08.58;
AGCH overload should be detected in the DELETE INDICATION
Description message.

2-607

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

At that moment, the number of IMMEDIATE REJECT messages or


IMMEDIATE ASSIGNMENT messages that BSS fails to send reaches
a certain number. PCH overload should be detected in the CCCH
LOAD INDICATION message, and BSS only notifies MSC and does
not do any handling.
Other types of overload, which can be found in the OVERLOAD
message, for example, MTP overload.
Type the control level value to do or action.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

Default Value
Configuration Reason Usually users are not limited.

Configuration Rule and Usually the user limitation is configured during


Adjustment Suggestion the installation commissioning or the congestion control.

Change Mode Offline

Related features ZGB-03-01-001 MS Access Control

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.29 Uplink discontinuous transmission


Full Name Uplink discontinuous transmission

Abbreviation dtxUplinkBcch

Managed Object GSM Cell Configuration

3GPP Name DTX

2-608

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS44.018

The Discontinuous Transmission (DTX) mode means that the system


does not transmit signals during the speech intermission of the
subscriber
conversation. This parameter controls how MS uses the DTX mode.
System broadcasts RIL3_RR SYSTEM INFORMATION TYPE3
message to all MSs in the cell. In addition, it may be necessary to
notify MSs of older versions (of the first stage) through the RIL3_RR
SYSTEM INFORMATION TYPE6 message on SACCH. For MSs of
newer versions, the RIL3_RR SYSTEM
INFORMATION TYPE6 message contains Uplink discontinuous
transmission.
This parameter is one of the network function parameters.
The values are as follows:
0: MS could use DTX.
1: MS should use DTX.
2: MS should not use DTX.
If both the BTS equipment and TRAU support the DTX mode, set the
Description parameter as 1 (use DTX). Otherwise set it to 2 (not use DTX).

Instance Cell

0: May use uplink DTX


1: Shall use uplink DTX
Value Range and Step 2: Shall not use uplink DTX

Unit N/A

Default Value 1

Default Value
Configuration Reason Protocol Recommended

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features ZGO-04-02-004 Discontinuous Transmission Uplink

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-609

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.30 Protection period for access attempt


Full Name Protection period for access attempt

Abbreviation t3122

Managed Object GSM Cell Configuration

3GPP Name T3122

3GPP Reference 3GPP TS 44.018

The network sends the IMMEDIATE ASSIGNMENT REJECT message


to MS when it receives a channel request message from MS and will not
allocate a suitable channel to MS. IMMEDIATE ASSIGNMENT REJECT
message contains T3122 timer parameter to prevent possible wireless
channel blocking caused by repeated channel requests sent by the MS,
which is waiting for indication information unit.
MS cannot restart a new call until the time indicated by T3122 is elapsed
if it receives the IMMEDIATE ASSIGNMENT REJECT message.
This parameter is also one of the system control parameters, and is sent
to MS in the IMMEDIATE ASSIGNMENT REJECT message.
Following are the suggested values: 10 s ~ 15 s for normal traffic area;
Description 15 s ~ 25 s for dense traffic area.

Instance Cell

Value Range and Step 0..255

Unit s

Default Value 10

Default Value
Configuration Reason User experience and network resource usage

The recommended value is 10~15 s, and 15~25 s for dense-traffic areas.


It is a gradual process for the cell traffic to change or a fault occurs to and
Configuration Rule and
is removed from a cell. If this parameter is set as too small, the success
Adjustment Suggestion
rate of request again may be not high, and the system is loaded more
heavily. If this paramter is set as too large, users' feeling becomes poor.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-610

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.31 Multi-band report indication


Full Name Multi-band report indication

Abbreviation mulbandReport

Managed Object GSM Cell Configuration

3GPP Name MULTIBAND_REPORTING

3GPP Reference 3GPP TS 45.008

MS in single-frequency GSM system needs only to report contents


of six adjacent cells with the strongest signals in a frequency band,
when reporting the measurement result of adjacent cells to the
network. In multi-band networking, MS can enter with priority into
a specific frequency band during handover. The MS reports the
measurementresult according to the signal intensity and the frequency
band of the signals, according to the actual situation.
Multiband report indication is used to notify MS to report contents of
adjacent cells in multiple frequency bands. It is one of the system
control parameters.
The setting of this parameter is subject to traffic in each frequency band.
General principles to set the parameters are as follows: 0: If the traffic
of each frequency band is almost equivalent, and the operator has no
choice over the frequency band.
3: If the traffic of each frequency band is quite different, and the operator
hopes that MS enters a specific frequency band with priority.
The values are as follows:
0: MS reports the survey results of six known and allowed adjacent cells
with the strongest NCC according to the signal intensity, regardless
Description of which frequency band adjacent cells are in.

2-611

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

1: MS reports the measurement result of 1 adjacent cells with strongest


signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remaining space, MS reports
adjacent cell in local cell frequency band. If still more space is
available, MS reports the remaining adjacent cells, regardless of which
frequency bands they are in.
2: MS reports the measurement result of 2 adjacent cells with strongest
signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remaining space, MS reports
adjacent cell in local cell frequency band. If still more space is
available, MS reports the remaining adjacent cells, regardless of which
frequency bands they are in.
3: MS reports the measurement result of 3 adjacent cells with strongest
signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remaining space, MS reports
adjacent cell in local cell frequency band. If still more space is
available, MS reports the remaining adjacent cells, regardless of which
frequency bands they are in.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 3

Default Value
Configuration Reason The cell in different frequency bands have more opportunities to report

In the dual-band network scenario, the handover of MS in 1800M and


the traffic shared with 1800M are subject to the following settings: 3:
900M cells report 1800M adjacent cells as often as possible. 1: 1800M
cells report 900M adjacent cells as seldom as possible.
Configuration Rule and
0: In the dual-band network scenario, the contents are reported
Adjustment Suggestion
according to signal strength, to balance the traffic.
Reasonable setting is useful for traffic balance, congestion improvement.
Whereas, it may influence the handover success rate, calldrop rate,
and coverage rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

2-612

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.32 Redirection enable


Full Name Redirection enable

Abbreviation drInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates if to use directed retry process. Network


assigns corresponding service channel for MS in an adjacent cell, if
there is no service channel available in serving cell.
Directed retry indication defines a special handover process that can
reduce the call drop ratio. Directed retry falls into intra-BSC directed
retry and inter-BSC directed retry. The former one does not need the
Description participation of MSC, while the latter one does.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and It is recommended to enable the directed retry


Adjustment Suggestion in areas with heavy traffic.

Change Mode Offline

Related features ZGB-03-01-002 Direct Retry

Related Parameters drIndInterBsc

When this parameter is set to "Yes", the "DrInd_1" parameter can be set.
Relationship The directed retry function is enabled only when the BSS-level directed
retry (InDrEnable) and the cell-level directed retry are both enabled.

2-613

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.33 Outer redirection enable


Full Name Outer redirection enable

Abbreviation drIndInterBsc

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to enable the external directed retry,


Description that is, inter-BSC directed retry.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and It is recommended to enable the external directed


Adjustment Suggestion retry in areas with heavy traffic on the coverage border of the iBSC.

Change Mode Offline

Related features N/A

Related Parameters drInd

The parameter can only be set when the "DrInd_0" parameter is set
to "Yes".
Relationship
The external directed retry can be enabled only when this parameter and
the OutDrEnable parameter are both enabled.

2-614

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.34 Downlink discontinuous transmission allowed


Full Name Downlink discontinuous transmission allowed

Abbreviation dtxDwlink

Managed Object GSM Cell Configuration

3GPP Name DTX

3GPP TS 44.018
3GPP TS 48.008
3GPP Reference 3GPP TS 48.058

DTX mode is an optional downlink feature of GSM System.


The Discontinuous Transmission (DTX) mode means that the system
does not transmit signals during the speech intermission of the
subscriber conversation. This parameter participates in determining to
use DTX mode in downlink direction.
Actually, using DTX in downlink direction (in CHANNEL ACTIVATION
message and MODE MODIFY message sent to BTS) is determined
together by this parameter and the DTX indication in downlink direction
in ASSIGNMENT REQUEST message and HANDOVER REQUEST
message of MSC.
Yes: enable;
Description No: not used

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-615

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason The functional Switch, default: close

DTX function can lower the BTS power consumption and reduce the
inner system interference.
Configuration Rule and When MSC forbids the downlink DTX, it is not used no matter how this
Adjustment Suggestion parameter is set;
When MSC allows the downlink DTX, this parameter determines whether
the downlink DTX is used.

Change Mode Offline

Related features ZGO-04-02-003 Discontinuous Transmission Downlink

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.35 SI13 sending position


Full Name SI13 sending position

Abbreviation si13Locate

Managed Object GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

2-616

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used at the MS side. SI13 sending position indicates


the scheduling position of SI13 on BCCH.
SI13 is related to the GPRS services. SI13 can be sent on either of the
following: BCCH Norm position. In this case, it occupies the BCCH
block with TC = 4; TC = ((FN DIV 51) mod (8)).
BCCH Ext position. In this case, it occupies one fixed AGCH block
with TC = 0. SI13 is sent with low success rate on the BCCH Ext
position, because SI13 has to compete with other messages, such as
IMMEDIATE ASSIGNMENT message, for delivery opportunity. For this
case, the parameter value of Access Allowed Reserved Blocks must be
Description set greater than 0. Otherwise, SI13 will not be sent.

Instance Cell

0: BCCH Norm
Value Range and Step 1: BCCH Ext

Unit N/A

Default Value 0

Default Value
Configuration Reason Protocol Recommended Value

Configuration Rule and The value BCCH Norm is dependent upon the protocol
Adjustment Suggestion recommended value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.36 Queue allowed when assign


Full Name Queue allowed when assign

2-617

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation queueAssInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow queuing during assignments


Description when no available channel exists in the cell.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

This switch is only enabled when the queuing function is required on site.
If this switch is enabled, an assignment process can obtain resources by
Configuration Rule and
queuing to improve the call completion rate when no available resource
Adjustment Suggestion
exists in the system. However, the time for completing a call may be
prolonged.

Change Mode Offline

Related features ZGB-03-01-003 Queuing

Related Parameters QueueIndAss


AssQueEnable

Two BSC-level parameters are related to this parameter: QueueIndAss


Relationship and AssQueEnable. The queuing is allowed only when these three
parameters are enabled at the same time.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-618

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.37 Forced release indicate when assign


Full Name Forced release indicate when assign

Abbreviation preemptionAssInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow forced release during assign-


ments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message.
If this message contains a high priority level and a valid PCI (indicating
this user can preempt the channel of another user), the BSC can forcibly
release the connection to a user whose PVI is reset (indicating the chan-
nel of this user can be preempted by another user) and then allocate the
released channel on this assignment request when no resource is imme-
Description diately assigned to the higher-priority user.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Forced releases have more effect on low-priority


Default Value
users. By default, the forced release function is disabled. You can
Configuration Reason
enable it if necessary.

If you want high-priority users to access channels


Configuration Rule and first during assignments, you should enable the forced release function.
Adjustment Suggestion If the forced release function will be used by AssPreemptstrategy
during the assignment, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters PreemptionIndAss

This parameter is valid only when the BSC-level parameter


Relationship
PreemptionIndAss is set to "2: According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

2-619

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.38 Forced handover indication for assign


Full Name Forced handover indication for assign

Abbreviation forcedAssInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow forced handover during assign-


ments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message. If
this message contains a high priority level and a valid PCI (indicating this
user can preempt the channel of another user), the BSC can hand over
a user whose PVI is reset (indicating the channel of this user can be pre-
empted by another user) to another cell and then allocate the released
channel on this assignment request when no resource is immediately as-
Description signed to the higher-priority user.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If you want high-priority users to access channels


through forced handover during assignments, you should enable this
Configuration Rule and
switch. If the forced handover function will be used by
Adjustment Suggestion
AssPreemptstrategy
during the assignment, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters ForcedHolndAss

2-620

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is valid only when the BSC-level parameter


Relationship
ForcedHolndAss is set to "2: According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.39 Queue allowed when handover


Full Name Queue allowed when handover

Abbreviation queueHoInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow queuing during handovers


Description when no available channel exists in the cell.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

This switch is only enabled when the queuing function is required on site.
Configuration Rule and
If this switch is enabled, an external handover process can obtain
Adjustment Suggestion
resources by queuing when no available resource exists in the system.

Change Mode Offline

Related features ZGB-03-01-003 Queuing

Related Parameters QueueIndHo


HoQueEnable

2-621

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Two BSC-level parameters are related to this parameter: QueueIndHo


Relationship and HoQueEnable. The queuing is allowed only when these three
parameters are enabled at the same time.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.40 Forced release indicate when handover


Full Name Forced release indicate when handover

Abbreviation preemptionHoInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow forced release during han-


dovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can forcibly release the connection to a user whose PVI is
reset (indicating the channel of this user can be preempted by another
user) and then allocate the released resource to this handover request
when no resource is immediately assigned in this handover or the later
Description handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

2-622

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Forced releases have more effect on low-priority


Default Value
users. By default, the forced release function is disabled. You can
Configuration Reason
enable it if necessary.

If you want high-priority users to access channels


Configuration Rule and first during handovers, you should enable the forced release function.
Adjustment Suggestion If the forced release function will be used by HoPreemptstrategy during
the handover, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters PreemptionIndHo

This parameter is valid only when the BSC-level parameter


Relationship
PreemptionIndHo is set to "2: According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.41 Forced handover indication for handover


Full Name Forced handover indication for handover

Abbreviation forcedHoInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-623

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to allow forced handover during han-


dovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can hand over a user whose PVI is reset (indicating the channel
of this user can be preempted by another user) to another cell and then
allocate the released resource to this handover request when no resource
Description is immediately assigned in this handover or the later handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If you want high-priority users to access channels


Configuration Rule and through forced handover during assignments, you should enable this
Adjustment Suggestion switch. If the forced handover function will be used by HoPreemptstrategy
during the handover, you should enable this switch.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters ForcedHolndHo

This parameter is valid only when the BSC-level parameter


Relationship
ForcedHolndHo is set to "2: According to the cell".

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-624

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.42 Cipher mode priority 1


Full Name Cipher mode priority 1

Abbreviation cipherModePrio1

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

2-625

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.43 Cipher mode priority 2


Full Name Cipher mode priority 2

Abbreviation cipherModePrio2

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

2-626

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.44 Cipher mode priority 3


Full Name Cipher mode priority 3

Abbreviation cipherModePrio3

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

2-627

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.45 Cipher mode priority 4


Full Name Cipher mode priority 4

Abbreviation cipherModePrio4

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

2-628

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.46 Cipher mode priority 5


Full Name Cipher mode priority 5

Abbreviation cipherModePrio5

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-629

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-630

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.47 Cipher mode priority 6


Full Name Cipher mode priority 6

Abbreviation cipherModePrio6

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

2-631

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.48 Cipher mode priority 7


Full Name Cipher mode priority 7

Abbreviation cipherModePrio7

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter records the priority level of the current cipher mode sup-
ported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description port".

Instance Cell

0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step 7: A5/7

Unit N/A

Default Value 0

Default Value
Configuration Reason need negotiate with CN

Modify the parameter after negotiating with


Configuration Rule and
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
Adjustment Suggestion
now.

Change Mode Offline

2-632

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN YES

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.49 Preprocessing indication


Full Name Preprocessing indication

Abbreviation preprocess

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The measurement report contains the largest amount (message amount)


of Abis interface information. Preprocess of the measurement report
can be transferred to BTS to reduce the burden of Abis interface link.
After preprocess, BTS averages the measurement data of MS by its
own, and reports to BSC in a lower frequency.
Average reporting period can be two, three or four SACCH multi-frames
(480 ms). That is, the frequency decreases from the original twice per
second to once per two seconds, so the message amount of Abis
interface decreases. However, the decrease of message amount still
depends on if the message length before preprocess is the same as
that after preprocess. One disadvantage of preprocess is that the
handover control and power control are not in time, which increases the
possibility of disconnection rate. This parameter determines whether to
use preprocess or not and its period.
The values are as follows:
0: means not using preprocess
2: means using preprocess, and the period of averaging and reporting is
Description
of 2 SACCH multi-frames

2-633

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3: means using preprocess, and the period of averaging and reporting is


of 3 SACCH multi-frames
4: means using preprocess, and the period of averaging and reporting is
of 4 SACCH multi-frames
10: means using preprocess on TCH, and the period of averaging and
reporting is of 2 SACCH multi-frames
11: means using preprocess on TCH, and the period of averaging and
reporting is of 3 SACCH multi-frames
127: means using preprocess on TCH, and the period of averaging and
reporting is of 4 SACCH multi-frames

Instance Cell

0:Not Support
2:Preprocess,2 SACCH block period
3:Preprocess,3 SACCH block period
4:Preprocess,4 SACCH block period
18: Preprocess on TCH,2 SACCH block period
19: Preprocess on TCH,3 SACCH block period
Value Range and Step 20: Preprocess on TCH,4 SACCH block period

Unit N/A

Default Value 0

Default Value Abis messages to reduce the amount and timeliness to meet a
Configuration Reason compromise deal

It is suggested to disable all preprocesses.


If the default value is set as small, the handover frequency increases,
Configuration Rule and which helps improve handover success rate but affects calldrop rate
Adjustment Suggestion and coverage rate.
If the parameter is set as large, handover lagging increases, which
affects the caldrop rate and coverage rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-634

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.50 Fast average indication


Full Name Fast average indication

Abbreviation fastAvg

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

During a call, the system may fail to perform the power control due to little
measurement data because the average calculation can only be started
when the amount of measurement data reaches a certain threshold.
For example, if the threshold for average calculation is 8, the system will
not calculate the average when the BSC only receives five measured
values. However, the BSC can calculate the average of the five
measured values by using the fast averaging function. Once some
measured values are already used for power control, they become
useless and cannot be used for power control any longer because using
old measured values may cause control errors. Therefore, the old
Description measured values must be discarded.

Instance Cell

1: Allowed
Value Range and Step 0: Not allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason This function can be disabled for V3 base stations.

Configuration Rule and It is recommended to enable the fast averaging


Adjustment Suggestion function for SDR base stations to speed up the start of power control.

Change Mode Offline

ZGO-04-02-001 Dynamic BTS Power Control


ZGO-04-02-002 Dynamic MS Power Control
Related features ZGO-04-02-017 Downlink Rapid Power Control

Related Parameters N/A

Relationship N/A

2-635

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.51 Allowed FACCH call setup after emergency call


Full Name Allowed FACCH call setup after emergency call

Abbreviation facchCallEmgCall

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

BSC can allocate the suitable TCH channel when an MS attempts to ac-
cess the network, and there is no SDCCH available in the cell. That is the
Description so-called FACCH call establishment.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling this switch can shorten the delay of call completion. However,
using TCH as signalling channel will cause the waste of radio resources.
Configuration Rule and
It is only recommended to enable this function in scenarios having
Adjustment Suggestion
requirements on the preference and completion delay of emergency
calls.

Change Mode Offline

ZGB-03-01-004 Immediate TCH Assignment


Related features ZGB-01-03-001 Emergency Call Handling

Related Parameters N/A

2-636

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.52 Allowed FACCH call setup when page respond


Full Name Allowed FACCH call setup when page respond

Abbreviation facchCallPagResp

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

BSC can allocate the suitable TCH channel when an MS attempts to ac-
cess the network, and there is no SDCCH available in the cell. That is the
Description so-called FACCH call establishment.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling this switch can shorten the delay of call completion. However,
Configuration Rule and
using TCH as signalling channel will cause the waste of radio resources.
Adjustment Suggestion
It is recommended to disable this switch unless specially required.

Change Mode Offline

Related features ZGB-03-01-004 Immediate TCH Assignment

Related Parameters N/A

Relationship N/A

2-637

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.53 Allowed call setup on FACCH


Full Name Allowed call setup on FACCH

Abbreviation facchCallMo

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

BSC can allocate the suitable TCH channel when an MS attempts to ac-
cess the network, and there is no SDCCH available in the cell. That is the
Description so-called FACCH call establishment.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling this switch can shorten the delay of call completion. However,
Configuration Rule and
using TCH as signalling channel will cause the waste of radio resources.
Adjustment Suggestion
It is recommended to disable this switch unless specially required.

Change Mode Offline

Related features ZGB-03-01-004 Immediate TCH Assignment

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-638

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.54 Allowed call reestablished on FACCH


Full Name Allowed call reestablished on FACCH

Abbreviation facchCallCallReEst

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

BSC can allocate the suitable TCH channel when an MS attempts to ac-
cess the network, and there is no SDCCH available in the cell. That is the
Description so-called FACCH call establishment.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Enabling this switch can shorten the delay of call completion. However,
Configuration Rule and
using TCH as signalling channel will cause the waste of radio resources.
Adjustment Suggestion
It is recommended to disable this switch unless specially required.

Change Mode Offline

Related features ZGB-03-01-004 Immediate TCH Assignment

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-639

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.55 Minimal resource threshold


Full Name Minimal resource threshold

Abbreviation resourceThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the minimal resource threshold allowed by the


Description cell. It is used to calculate dynamic cell priority.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

Default Value
Configuration Reason experience value

The lower limit of resources should be larger


than 10 due to the designation limitations of logarithm table. It
Configuration Rule and
is recommended not to modify this parameter value.If the threshold
Adjustment Suggestion
is adjusted, the dynamic priority changes linearly, which is relatively
complicated to compute.

Change Mode Offline

Related features ZGO-02-02-002 Dynamic Handover Priority Algorithm

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-640

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.56 PCH load indication period


Full Name PCH load indication period

Abbreviation ccchLoadIndPrd

Managed Object GSM Cell Configuration

3GPP Name CCCH Load Indication Period

3GPP Reference 3GPP TS 12.12

According to GSM specifications, within a PCH(or RACH) overload mea-


surement period, when the PCH(or RACH) load of BTS exceeds the over-
load threshold specified on O&M, BTS will periodically send the CCCH
LOAD INDICATION message to BSC till the PCH(or RACH) load does
Description not exceed the threshold.

Instance Cell

Value Range and Step 1..255

Unit s

Default Value 2

Default Value
Configuration Reason Timely reporting overload and overload recovery

Configuration Rule and It is recommended not to adjust the configuration


Adjustment Suggestion of this parameter.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-641

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.57 CCCH load indication (RACH)


Full Name CCCH load indication (RACH)

Abbreviation CcchLoadINDThs_0

Managed Object GSM Cell Configuration

3GPP Name CCCH Load Threshold

3GPP Reference 3GPP TS 12.12

When load degree in RACH channel for BTS exceeds this threshold, BTS
sends CCCH LOAD INDICATION message periodically to iBSC until load
Description degree in RACH channel doesn't exceed this threshold value.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason Empirical values for high load

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-642

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.58 CCCH load indication (PCH)


Full Name CCCH load indication (PCH)

Abbreviation CcchLoadINDThs_1

Managed Object GSM Cell Configuration

3GPP Name CCCH Load Threshold

3GPP Reference 3GPP TS 12.12

When load degree in PCH channel for BTS exceeds this threshold, BTS
sends CCCH LOAD INDICATION message periodically to iBSC until load
Description degree in PCH channel doesn't exceed this threshold value.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason Empirical values for high load

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-643

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17.59 Interference average period


Full Name Interference average period

Abbreviation interfAvgPrd

Managed Object GSM Cell Configuration

3GPP Name INTAVE

3GPP Reference 3GPP TS45.008

BTS needs to measure interference on the unallocated traffic channels.


BTS calculates the average of recent interference values on periodic basis
and converts it into corresponding interference band information. BTS
then, transfers to BSC in the RF RESOURCE INDICATION message to
consider it as a factor in channel allocation strategy. This parameter is
Description one of the BTS configuration parameters.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 31

Default Value Generally, a long period can be set because


Configuration Reason the fluctuation of uplink interference is not great.

If the parameter value is too small, radio resource information will be


frequently reported, which increases the load of the BSC.
Configuration Rule and
If the parameter value is too large, the change of radio resources cannot
Adjustment Suggestion
be reflected in time due to the long update period of radio resource
report.

Change Mode Offline

Related features ZGO-03-02-001 Idle Channel Measurement

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-644

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.60 Interference Band Boundary


Full Name Interference Band Boundary

Abbreviation interfBoundary

Managed Object GSM Cell Configuration

3GPP Name [0,X1,X2,X3,X4,X5]

3GPP Reference 3GPP TS45.008

BTS needs to measure interference on the unallocated traffic channels.


BTS calculates the average of recent interference values on periodic
basis and converts it into corresponding interference band information.
BTS then, transfers to BSC in the RF RESOURCE INDICATION
message to consider it as a factor in channel allocation strategy.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. One of them represents infinity and the other
represents negative infinity. This parameter, describing
the remaining four boundaries, is one of the BTS configuration
parameters.
Description Generally, -85 dBm ~ -115 dBm is used for interference boundaries 1 ~ 4.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [0,10,15,20,25,63]

Set the boundaries of each interference band


Default Value
according to the interference range generally measured in the actual
Configuration Reason
network.

If two boundaries are too close, the conversion


Configuration Rule and of interference band will be too sensitive on the change of interference
Adjustment Suggestion level. If the difference between two boundaries is too great, the
change of interference level cannot be reflected in time.

Change Mode Offline

2-645

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-03-02-001 Idle Channel Measurement

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.61 MAX resending times for physical information


Full Name MAX resending times for physical information

Abbreviation ny1

Managed Object GSM Cell Configuration

3GPP Name Ny1

3GPP Reference 3GPP TS44.018

During a non-synchronous switch, the BTS sends the time advance


threshold to the MS. After sending an RIL3_RR PHYSICAL INFORMA-
TION information, the BTS starts the timer T3105. If the second-layer
frame or TCH frame cannot be decoded when the timer is timed out,
the BTS will resend the RIL3_RR PHYSICAL INFORMATION message
and then start T3105 again. the parameter NY1 (the Max Number of
Repetition) determines the number of times of RIL3_RR PHYSICAL
Description INFORMATION sending.

Instance Cell

Value Range and Step 5..35

Unit N/A

Default Value 20

Default Value The default value is set in consideration of


Configuration Reason the maximum delay of message interaction at the radio interface.

2-646

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

A too small parameter value will reduce the retransmission times and
thus decrease the transmission success rate.
Configuration Rule and A too large parameter value may cause the waste of radio resources.
Adjustment Suggestion The parameter value can be appropriately increased in the case of
slow handover or low handover success rate caused by bad clock or
transmission.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.62 RACH load indication period


Full Name RACH load indication period

Abbreviation overloadPrd

Managed Object GSM Cell Configuration

3GPP Name Overload Period

3GPP Reference 3GPP TS 12.12

According to GSM specifications, when the Access Burst level exceeds


the predefined access level busy threshold (RACHBusyThs), the Access
Burst is considered as busy burst. During the period of RACH overload
measurement, if the ratio of the number of Busy Bursts to all Access
Bursts exceeds the RACH overload threshold set by O&M, then the CCCH
Description LOAD INDICATION message is reported.

Instance Cell

Value Range and Step 1..255

Unit s

2-647

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 2

Default Value
Configuration Reason Timely reporting overload and overload recovery

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.63 Average bursts count surveyed by RACH


Full Name Average bursts count surveyed by RACH

Abbreviation avgSlots

Managed Object GSM Cell Configuration

3GPP Name RACH Load Averaging Slots

3GPP Reference 3GPP TS 12.12

This parameter indicates the number of bursts (AvgSlots) on RACH. If the


receiving signal level of this parameter burst is higher than RachBusyThs,
the RACH channel overloads. This parameter is one of the parameters
Description used by BTS.

Instance Cell

Value Range and Step 0..100

Unit N/A

Default Value 60

2-648

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason EXP

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.64 RACH receiving signal level threshold for busy burst


Full Name RACH receiving signal level threshold for busy burst

Abbreviation rachBusyThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

RACH receiving signal level threshold for busy burst is the threshold for
receiving signal level in RACH bursts. If the value is exceeded (that is less
than RACH Receiving signal level threshold for busy burst dBm), system
Description considers that as a busy RACH.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

2-649

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the value is set as too low, BTS is more likely to report the overloading
Default Value
information to the BSC, so the default value is set as a relatively high
Configuration Reason
value.

If this parameter is set as too small, BTS is likely to judge RACH timeslot
Configuration Rule and
as busy, and the overloading message is prone to report to the BSC. It is
Adjustment Suggestion
recommended to keep the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.65 Times of N200 for SDCCH


Full Name Times of N200 for SDCCH

Abbreviation N200forSDCCH

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for SDCCH.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

2-650

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The default value is recommended by the protocol.

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.66 Times of N200 for FACCH_F


Full Name Times of N200 for FACCH_F

Abbreviation N200forFACCHF

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for FACCH_F.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is recommended by the protocol.

2-651

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.67 Times of N200 for FACCH_H


Full Name Times of N200 for FACCH_H

Abbreviation N200forFACCHH

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for FACCH_H.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is recommended by the protocol.

2-652

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.68 Times of N200 for SACCH


Full Name Times of N200 for SACCH

Abbreviation N200forSACCH

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for SACCH.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is recommended by the protocol.

2-653

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.69 Times of N200 for establish


Full Name Times of N200 for establish

Abbreviation N200forEstablish

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for establish.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is recommended by the protocol.

2-654

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.70 Times of N200 for Release


Full Name Times of N200 for Release

Abbreviation N200forRelease

Managed Object GSM Cell Configuration

3GPP Name N200

3GPP Reference 3GPP TS44.006

N200 is the numbers of retransmission which is on kinds of control chan-


nel in LAPDM protocol of BTS. This parameter describe the times of N200
Description for Release.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is recommended by the protocol.

2-655

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is set as large, the number of retransmission


Configuration Rule and
times increases, as a result of successful retransmission as well as
Adjustment Suggestion
too-long-time channel occupation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.17.71 Interval of SDCCH re-sending PHY info message


Full Name Interval of SDCCH re-sending PHY info message

Abbreviation t3105d

Managed Object GSM Cell Configuration

3GPP Name T3105

3GPP Reference 3GPP TS44.018

It is the interval for resending the RIL3_RR PHYSICAL INFOMATION


message during an asynchronous handover of SDCCH channel. This
timer is one of the configuration parameters of BTS.
Timer Start: It starts when network sends the RIL3_RR PHYSICAL
INFORMATION message.
Timer Stop: It stops when the network receives a layer-2 frame that can
be correctly decoded or receives the HANDOVER FAILURE message
from the former channel.
Overtime Action: If the timer is overtime, RIL3_RR PHYSICAL
Description INFORMATION message will be redelivered.

Instance Cell

Value Range and Step 1..67

2-656

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 28

Default Value The default value is set in consideration of


Configuration Reason the minimum delay of message interaction at the radio interface.

Physical information is sent over FACCH, which occurs every four TDMA
frames. That is, the physical information is sent every 18 ms. Therefore,
20 ms is recommended as an appropriate minimum value.
Configuration Rule and When adjusting the parameter value, take the following into
Adjustment Suggestion consideration: a too short interval may cause the transmission of too
much redundant information;
a too long interval may reduce the access speed of the MS when the
radio environment is bad.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.72 Interval of TCH re-sending PHY info message


Full Name Interval of TCH re-sending PHY info message

Abbreviation t3105f

Managed Object GSM Cell Configuration

3GPP Name T3105

3GPP Reference 3GPP TS44.018

2-657

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is the interval for resending the RIL3_RR PHYSICAL INFOMATION


message during an asynchronous handover of TCH channel. This timer
is one of the configuration parameters of BTS.
Timer Start: It starts when network sends the RIL3_RR PHYSICAL
INFORMATION message.
Timer Stop: It stops when the network receives a layer-2 frame that can
be correctly decoded or receives the HANDOVER FAILURE message
from the former channel.
Overtime Action: If the timer is overtime, RIL3_RR PHYSICAL
Description INFORMATION message will be redelivered.

Instance Cell

Value Range and Step 1..32

Unit N/A

Default Value 10

Default Value The default value is set in consideration of


Configuration Reason the minimum delay of message interaction at the radio interface.

Physical information is sent over FACCH, which occurs every four TDMA
frames. That is, the physical information is sent every 18 ms. Therefore,
20 ms is recommended as an appropriate minimum value.
Configuration Rule and When adjusting the parameter value, take the following into
Adjustment Suggestion consideration: a too short interval may cause the transmission of too
much redundant information;
a too long interval may reduce the access speed of the MS when the
radio environment is bad.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-658

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.73 TA Max
Full Name TA Max

Abbreviation taMax

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the maximum TA supported by extended car-


rier frequency. It defines the cell coverage capability. The users with
Description values that exceed TaMax cannot access or will be dropped.

Instance Cell

{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
Value Range and Step {cellType==4}[0..219]

Unit N/A

{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
Default Value {cellType==4}219

Default Value
Configuration Reason Common cell by default

The cell coverage capability is configured


Configuration Rule and
based on the cell type (extended cell or not). The parameter is set
Adjustment Suggestion
to 63 fro common cells and 219 for extended cells.

Change Mode Offline

Related features ZGO-04-01-001 Extended Cell Coverage

Related Parameters CellType


DistanceThs

When CellType is selected as the non-extended cell, the value is 0~63.


When CellType is selected as the extended cell, the value is 0~219.
Relationship
DistanceThs during handover control should not be higher than the TA
Max of the cell.

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-659

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.74 TA allowed
Full Name TA allowed

Abbreviation taAllowed

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum TA that is allowed to access the


cell. If the delay time period requested by the channel exceeds the al-
Description lowed range of TA, user access is not allowed.

Instance Cell

{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
Value Range and Step {cellType==4}[0..219]

Unit N/A

{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
Default Value {cellType==4}219

Default Value
Configuration Reason Common cell by default

Configuration Rule and TaAllowed can be reduced to control the access


Adjustment Suggestion coverage.

Change Mode Offline

Related features N/A

Related Parameters AttributeModeInd

2-660

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The value of "Cell Type" has influence on the value range and default
Relationship value of this parameter.
The parameter takes effect only when TLV is supported.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.75 Allow SOLSA MS to access


Full Name Allow SOLSA MS to access

Abbreviation exc_Acc

Managed Object GSM Cell Configuration

3GPP Name EXC_ACC

3GPP Reference N/A

System broadcasts this parameter to MS in SI4, SI6, and SI7 messages.


In addition, the parameter information is available in PSI3 and Psi3bis
messages of local and neighboring cells. This parameter is used by net-
Description work to prevent MS from residing in the cell.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason normaly the non-SoLSA MS is not forbidden to access

Configuration Rule and If MSs with SoLSA access authorization are


Adjustment Suggestion expected to access a cell, set this parameter "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

2-661

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.76 Repeated ACCH support


Full Name Repeated ACCH support

Abbreviation repeatACCH

Managed Object GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

This parameter determines whether to use the FACCH/SACCH retrans-


Description mission function.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason Are new features, maintaining the same as before.

It is recommended to enable this function after


Configuration Rule and AMR is enabled, so as to improve the set-up success rate, whilst
Adjustment Suggestion currently
few mobile phones support the repeat SACCH.

Change Mode Offline

Related features ZGO-04-02-009 Repeated FACCH/SACCH

Related Parameters N/A

Relationship N/A

2-662

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.77 Frequency offset correct support


Full Name Frequency offset correct support

Abbreviation freqOffsetCorect

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the frequency offset correction is sup-


ported. This function is applied on the high-speed railway and GSM-R
Description situations, which can raise the uplink receiving performance.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value In most cases, frequency offset correction


Configuration Reason is not needed because most MSs does not move fast.

Configuration Rule and In the coverage area of high-speed railway


Adjustment Suggestion and expressway, this parameter can be set to "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-663

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.78 Maximum power on handover command support


Full Name Maximum power on handover command support

Abbreviation hoCmdMaxPwr

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

It indicates whether handover commands are issued in the highest trans-


Description mission power.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value There will be some interference if handover


Configuration Reason commands are issued in the highest transmission power.

Some power interference will be brought up if handover commands are


Configuration Rule and issued in the highest transmission power. This function can be enabled
Adjustment Suggestion in the coverage area with weak signals. It can improve the success rate
of handover commands received by MS.

Change Mode Offline

Related features ZGO-02-02-019 Handover Command Power Boost

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-664

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.79 Coefficient of Bvc bucket size


Full Name Coefficient of Bvc bucket size

Abbreviation rachAccessMin

Managed Object GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

MS uplink RACH access to the minimum threshold level, when the BTS
receives channel request, will measure the reception level, when the re-
Description ception level is less than the threshold, discard the access.

Instance Cell

Value Range and Step 90..125

Unit N/A

Default Value 125

Default Value
Configuration Reason The sensitivity range, the default is not limited

The default value is recommended. If this index is increased, the


Configuration Rule and coverage area will be reduced and the success rate of paging and
Adjustment Suggestion handover will be lowered. However, the accessibility and the drop rate
will be improved.

Change Mode Offline

Related features N/A

Related Parameters AttributeModeInd

The TLV parameter must be enabled to validate


Relationship
this functional parameter.

Related Interfaces AbisUm

Impact on Equipment 0

Impact on service 0

2-665

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.80 TA MIN
Full Name TA MIN

Abbreviation taMin

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

It indicates the minimum TA accessing the cell. In homocentric circle cov-


erage, this parameter is used with TaAllowed to limit the access of outer
Description circle cells.

Instance Cell

{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
Value Range and Step {cellType==4}[0..219]

Unit N/A

Default Value 0

Default Value The coverage area is not a homocentric circle


Configuration Reason by default and all users within the coverage have access authorities.

Configuration Rule and In homocentric circle coverage, TaMin can be


Adjustment Suggestion increased to users near the certer point to use the outer circle resources.

Change Mode Offline

Related features ZGO-04-01-001 Extended Cell Coverage

Related Parameters AttributeModeInd

The value of "Cell Type" has influence on the value range and default
Relationship value of this parameter.
The parameter takes effect only when TLV is supported.

Related Interfaces Abis

2-666

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.81 8PSK modulating power attenuation level


Full Name 8PSK modulating power attenuation level

Abbreviation tn7LowerLevel

Managed Object GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

This parameter indicates the 8PSK modulating power attenuation level. If


BCCH carrier uses the channel with 8PSK modulation, the BCCH carrier
Description is guaranteed to be sent at a constant power by setting this parameter.

Instance Cell

Value Range and Step 0..50

Unit N/A

Default Value 0

Default Value
Configuration Reason The default is not adjusted

Currently, the system does not support this function, and the modulation
Configuration Rule and
power of BCCH Ts is reduced by 2 dB through the usage of 8PSK.
Adjustment Suggestion
This parameter is valid until the TLV format is supported.

Change Mode Offline

Related features N/A

Related Parameters AttributeModeInd

This parameter is valid until the TLV parameter


Relationship
is enabled.

Related Interfaces Um

Impact on Equipment 0

2-667

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.82 Access class parameter config select


Full Name Access class parameter config select

Abbreviation accConfigSelect

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Switch for access control class SIM cards.


Description This switch controls one cell.

Instance Cell

0:Disable the user access control function


1:Enable the first ACC configuration data as user access control
parameters
2:Enable the second ACC configuration data as user access control
parameters
3:Enable the third ACC configuration data as user access control
parameters
4:Enable the fourth ACC configuration data as user access control
Value Range and Step parameters

Unit N/A

Default Value 0

Default Value In most cases no manual flow control is needed.


Configuration Reason The switch is turned off by default.

Configuration Rule and "Manual Flow Control" is applied, so the control


Adjustment Suggestion parameter can be adjust according to the traffic load.

Change Mode Offline

Related features N/A

2-668

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters UseCellAcc


AccessControl

When the user access control is enabled manually, the automatic flow
control will be stopped.
Relationship
When the settings of BSC-level manual access control switch parameter
is different, the system will use the settings of this parameter.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.83 Cell access control support


Full Name Cell access control support

Abbreviation useCellAcc

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The user access control parameter categorized on the basis of SIM uses
Description cell-level parameters or BSC-level parameters.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason The settings can vary in different cells.

Configuration Rule and If the same strategy is applied in BSC, this


Adjustment Suggestion parameter can be set "No".

Change Mode Offline

Related features N/A

2-669

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters AccessControl,


AccessControl

When this parameter is set to 0, the BSC level AccessControl parameter


is valid;
Relationship
When this parameter is set to 1, the cell level AccessControl parameter
is valid;

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.84 Support NCell of Channel Release


Full Name Support NCell of Channel Release

Abbreviation NCellIndOfChlRel

Managed Object GSM Cell Configuration

3GPP Name Cell selection indicator after release of all TCH and SDCCH

3GPP Reference 3GPP TS 44.018

3G dual-mode terminals will switch back to 3G network as soon as


possible when the GSM call ends. This parameter sets the neighbor cell
in a releasing message. For details, refer to the following:
0: Channel Relaese without Neighbour Cell
1: Channel Relaese with UTRAN Neighbour Cell
Description 2: Channel Relaese with E-UTRAN Neighbour Cell

Instance Cell

0: Channel Release without Neighbour Cell


1: Channel Release with UTRAN Neighbour Cell
Value Range and Step 2: Channel Release with E-UTRAN Neighbour Cell

Unit N/A

Default Value 0

2-670

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Enable or disable this function according to


Adjustment Suggestion the requirements of the local operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail Update

2.17.85 Strategy for E-Utran Neighbour Select When Release


Full Name Strategy for E-Utran Neighbour Select When Release

Abbreviation RelEUtranStrategy

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the policy for filling a channel release message
with the information of an E-UTRAN neighbor cell so that an MS can
quickly reselect the E-UTRAN cell after call completion.
The parameter value 0 indicates that the BSC selects the E-UTRAN
neighbor cell with the best signal quality from all measured E-UTRAN
neighbor cells to fill the channel release message.
The parameter value 1 indicates that the BSC fills the channel release
message with the configured E-UTRAN neighbor cell.
The parameter value 2 indicates that the BSC prefers to fill the channel
release message with the measured E-UTRAN neighbor cell with the
best signal quality. If no measured E-UTRAN neighbor cell is available,
Description the BSC fills the message with the configured E-UTRAN neighbor cell.

2-671

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value It is more precise to determine E_UTRAN handover neighbor cells


Configuration Reason according to the measurement report.

Generally, set this parameter to 0. If MSs are not expected to measure


Configuration Rule and E-Utran neighbor cells and thus there are more time for measuring
Adjustment Suggestion GSM/UTRAN cells, set this parameter to 1. In this case, E-Utran
neighbor cell selection is not precise.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.17.86 E-Utran FDD and TDD Prio When Release


Full Name E-Utran FDD and TDD Prio When Release

Abbreviation RelEUtranPrio

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether an MS prefers to select an FDD neigh-


bor cell or a TDD neighbor cell when an E-UTRAN neighbor cell is filled
to the channel release message to allow the MS to quickly reselect an
Description E-UTRAN cell after call completion.

2-672

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 0

This parameter can be set to the following values:


0: E-Utran TDD neighbor cell preferred
1: E-Utran FDD neighbor cell preferred
Default Value
2: E-Utran TDD neighbor cell only
Configuration Reason
3: E-Utran FDD neighbor cell only
Set the parameter based on the network condition and telecom
operator's requirement.

Configuration Rule and Set this parameter based on the network condition and telecom
Adjustment Suggestion operator's requirement.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.17.87 Support Emergency call preemption


Full Name Support Emergency call preemption

Abbreviation EmergCallPreempt

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-673

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to forcibly release a subscriber when


no resource is available for an emergency call. If no resource is available
for an emergency call, there are three cases: 1) If a proper channel is
not available during initial access, it is required to add a handling flow for
forcible release, so as to access an emergency call. 2) If a proper channel
is not available during assignment, it is required to modify the handling
flow for forcible release of an emergency call. 3) If no radio resource is
available during handover, it is required to forcibly release a subscriber to
access the emergency call. The value 1 indicates that the system support
forcibly releasing a subscriber in case of an emergency call. The value 0
indicates that the system does not support forcibly releasing a subscriber
Description in case of an emergency call.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason An emergency call is prior to be accessed.

Configuration Rule and Enable or disable this function according to


Adjustment Suggestion the requirements of the local operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail

2-674

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.88 BA show
Full Name BA show

Abbreviation bcchBaInd

Managed Object GSM Cell Configuration

3GPP Name BA ind

3GPP Reference 3GPP TS 44.018

This parameter refers to BA indication of BCCH.


Adjacent cell list can be broadcast on BCCH and transferred on SACCH.
The adjacent cell list transferred on BCCH can be different from that
on SACCH. When MS reports the measurement data of adjacent cell,
either BCCH adjacent cell list or SACCH adjacent cell list will be referred.
Therefore, to know which adjacent cell list is referred by MS, a BA
indication is added when transferring adjacent cell list on BCCH and
SACCH. When reporting the measurement result, MS notifies the
network side about the corresponding BA indication of the referred
adjacent
cell list. As a result, the network side recognizes which adjacent cell
list this MS uses.
This parameter describes the BS indication value when the adjacent
cell list being transferred on BCCH. In the case of transferring adjacent
cell list on SACCH, the BA indication value used is the reverse of the
parameter.
0: BA Show (BcchBaInd) value on BCCH (System message 2, 2bis,
2ter) is 0; BA Show (BcchBaInd) value on SACCH (System message 5,
5bis, 5ter) is 1.
1: BA Show (BcchBaInd) value on BCCH (System message 2, 2bis,
2ter) is 1; BA Show (BcchBaInd) value on SACCH (System message 5,
Description 5bis, 5ter) is 0.

Instance Cell

0: BA_IND is 0 on BCCH, 1 on SACCH


Value Range and Step 1: BA_IND is 1 on BCCH, 0 on SACCH

Unit N/A

Default Value 1

Default Value
Configuration Reason No reason

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

2-675

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.89 Support CS paging prefer PS Assignment


Full Name Support CS paging prefer PS Assignment

Abbreviation CsPagingPrefer

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the CS paging is preferred to the PS


Description assignment.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The priorities are the same by default.

Configuration Rule and


Adjustment Suggestion Set this parameter based on the customer's requirement.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-676

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.90 Channel Select Strategy


Full Name Channel Select Strategy

Abbreviation chanSelectstrategy

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides the channel allocation mode of each kind of high-
Description priority users.

Instance Cell

0:According to channel select order of MSC, when prefer TCHF and cell
congest\(allocation threshold of HR is exceeded\)change to prefer TCHH
1:Prefer TCHF, when cell congest \(allocation threshold of HR is
exceeded\),change to prefer TCHH
2:Prefer TCHH
3:TCHF only, not allocate TCHH
4:TCHH only, not allocate TCHF
5:According to channel select order of MSC, not consider whether cell
congest
6:According to channel select order of MSC, when prefer TCHF and
cell congest \(allocation threshold of HR is exceeded\) change to prefer
TCHH if AMR-HR supported
7:Prefer TCHF, not consider whether cell congest
8:Prefer TCHF, when cell congest \(allocation threshold of HR is
Value Range and Step exceeded\),change to prefer TCHH if AMR-HR supported

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

2-677

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally, in accordance with the channel allocation


Default Value
strategy provided by MSC, TCHH is preferentially allocated only in
Configuration Reason
the case of channel congestion.

Generally, the parameter is configured for


Configuration Rule and
higher-priority users. It is set to be easily allocated with TCHH
Adjustment Suggestion
instead of only TCHF or only TCHH.

Change Mode Offline

Related features ZGO-01-03-001 eMLPP

Related Parameters N/A

Relationship N/A

Related Interfaces A interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.91 EMLPP channel reserved rate


Full Name EMLPP channel reserved rate

Abbreviation emlppThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When using high priority user to access service, that is, EMLPP service,
the system may configure certain reserved channels for the users with
high priority to access CS service. The reserved channels equal to the
reserved rate of EMLPP multiplying the minimum value of available chan-
Description nels (including TCH and PD) and idle TCHP channels.

Instance Cell

Value Range and Step 0..100

Unit %

2-678

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason Feature parameter, not reserved by default.

Configuration Rule and


Adjustment Suggestion The parameter increase, high priority user can be

Change Mode Offline

Related features ZGO-01-03-001--Emlpp

Related Parameters N/A

Relationship N/A

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.92 Use cell EMLPP Threshold


Full Name Use cell EMLPP Threshold

Abbreviation useCellEmlppThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter defines whether to use eMLPPThs. If yes, you shall select
Description cell property, otherwise to select BSC property.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Use the BSC parameter normally

2-679

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and This switch can be enabled when one cell needs
Adjustment Suggestion to be configured with the EMLPP parameter independently.

Change Mode Offline

Related features ZGO-01-03-001--Emlpp

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.93 Dynamic HR support indication


Full Name Dynamic HR support indication

Abbreviation DynaHREnable

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether the BSC supports dynamic HR. The dy-
namic HR channel allocation function enables the network to allocate
full-rate or half-rate channels to MSs according to the traffic in the cell
when it allocate channels for the MSs. Allocating half-rate channels when
the channels in the cell are likely to be congested minimizes the duration
Description of possible congestions in peak hours.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

2-680

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and When the user number is reach or exceed the cell capability, the switch
Adjustment Suggestion can be open to extend the cell capability.

Change Mode Offline

Related features ZGO-03-02-005--Dynamic Half Rate Allocation

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.94 Threshold of AMR HR


Full Name Threshold of AMR HR

Abbreviation amrHrThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When busy timeslot/general timeslot >= AmrHRThs/100, and carrier and


cell support AMR, subsequent service prefers AMR voice rate.
This threshold value can be configured on BSC and BTS, when "User
cell dynamic HR parameter" (UseCellDynHRPara) is yes, AmrHRThs
value configured by cell will be used, otherwise AmrHRThs configured
Description by BSC is used.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 50

2-681

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason AmrHRThs need to less-than HRThs, so that the default value is 50%

When users expect the ratio of the AMRHR chjannel allocated in the
Configuration Rule and cell ito be increased, reduce this parameter value. When users expect
Adjustment Suggestion the ratio of the AMRHR channel allocated in the cell ito be decreased,
increase this parameter value.

Change Mode Offline

ZGO-03-02-006--Independent Threshold for Dynamic AMR HR/FR Con-


Related features version

Related Parameters hrThs

HRThs is not less than AmrHRThs. If the parameter


UseCellDynHRPara is enabled, the threshold of the cell-level dynamic
Relationship
AMR HR is valid. Otherwise, the threshold of the BSC-level AMRHR is
valid.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.95 Threshold for FR to HR


Full Name Threshold for FR to HR

Abbreviation hrThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When BSC and cell enables dynamic HR functions, and percentage of


TCH/F channel used in the cell (TCH/F channels occupied in the cell / all
available TCH channels in the cell (including IDLE and BUSY)) exceeds
Description this threshold, convert TCH/F -> TCH/H.

Instance Cell

2-682

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..100

Unit %

Default Value 60

Default Value When busy timeslot/general timeslot result is reach to 60%, we think the
Configuration Reason cell is busy, The cell need to be FR TO HR to expend cell capability.

Configuration Rule and When users want to increase The HR channel ration of a cell, reduce
Adjustment Suggestion this threshold appropriately.

Change Mode Offline

Related features ZGO-03-02-005--Dynamic Half Rate Allocation

Related Parameters amrHrThs

HRThs is not less than AmrHRThs. If the parameter


UseCellDynHRPara is enabled, the threshold of the cell-level dynamic
Relationship
AMR HR is valid. Otherwise, the threshold of the BSC-level AMRHR is
valid.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.96 Dynamic HR channel allocation algorithm


Full Name Dynamic HR channel allocation algorithm

Abbreviation DhrAlgorithm

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-683

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies the algorithm that calculates the busy level
required for dynamic HR channel allocation.
If a dynamic channel is configured in a cell, this channel is converted
into a dynamic PS channel when it is used for PS traffic. To consider
both CS and PS traffic, the cell deems that the dynamic PS channel
is busy, and allocates a dynamic HR channel before preempting the
dynamic PS channel when the calculated busy level is high. To consider
only CS traffic, the cell preempts the dynamic PS channel first and then
allocates an HR channel when the calculated busy level is high and no
Description enough FR channel is available.

Instance Cell

0: CS and PS
Value Range and Step 1: Only CS

Unit N/A

Default Value 0

Default Value Usually, the system considers that a dynamic


Configuration Reason channel is occupied when being used for the PS service.

The value is 1 (only for CS services) when users expect the dynamic
HR channel is enabled to improve the full-rate users proportion after
Configuration Rule and CS services preempt PS service channel, and think that PS service
Adjustment Suggestion performamce can be eradicated.
The value is 0 (for CS and PS services) with regard to CS service
capacity and PS service performance of the cell.

Change Mode Offline

Related features ZGO-03-02-005--Dynamic Half Rate Allocation

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-684

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.97 HR channel fragment finishing support


Full Name HR channel fragment finishing support

Abbreviation hrDfragSupport

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is a switch to support the HR channel defragmentation


function and can be configured on both BSCs and cells. The HR channel
defragmentation function is enabled only when both BSC- and cell-level
switches are enabled and the proportion of the idle TCH/Fs in these cells is
not more than the threshold proportion of the TCH/Fs to the total available
Description service channels in the cell where the defragmentation is enabled.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

This parameter can increase the number of full-rate


channels and improve the voice quality when a cell that applies dynamic
Configuration Rule and half-rate enable the HR fragment cleaning. This parameter can be
Adjustment Suggestion enabled
when needed. The BSC global parameter needs to be turned on, and the
number of handover within a cell will increase.

Change Mode Offline

Related features ZGO-03-02-004 HR Concentration

Related Parameters N/A

The HR fragment cleaning function can be enabled only when the


following three parameters have been enabled: BSC HRDfragSupport,
Relationship BSC HoIntraEnable and HRDfragSupport. The ratio of idle TCH/F
channel to all available service channels is the starting threshold of HR
fragment cleaning function.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-685

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.98 Busy threshold for HR defrag


Full Name Busy threshold for HR defrag

Abbreviation hrDefragBusyThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The defragmentation of HR channels can be started only when the cell


busy level is less than this busy threshold. The cell busy level is the pro-
portion of busy channels (including TCH/Hs, TCH/Fs, and PDTCHs) to all
available channels in the cell. It is calculated when HR channel defrag-
Description mentation is required due to release of HR MSs.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

HR fragment cleaning up will make the channel busier. We advise not to


Default Value
do HR defrag when more then 80% channel have been used, because
Configuration Reason
there are many service in the cell at this time.

This parameter defines the proportion of busy


channels in a cell. If the threshold is increased, HR fragment cleaning
up will start conducted when the cell is busy, and there will be more
Configuration Rule and
inner-cell handovers caused by HR fragment cleaning up. If the threshold
Adjustment Suggestion
is decreased, HR fragment cleaning up will start when the cell is
not busy, and there will be less inner-cell handovers caused by HR
fragment cleaning up.

Change Mode Offline

Related features ZGO-03-02-004 HR Concentration

Related Parameters hrDfragSupport

Relationship N/A

2-686

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.99 Idle FR threshold For HR defrag


Full Name Idle FR threshold For HR defrag

Abbreviation hrDefragIdleFRThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When the proportion between the number of idle TCH/F channels in cell
and the the number of all available service channels in cell is smaller than
Description this threshold value, the defragment is started.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

Default Value
Configuration Reason The default value is a low proportion threshold.

This parameter defines that the proportion


of idle TCH/F channels are the start threshold for HR fragment cleaning
up. If the threshold is increased, HR fragment cleaning up will be
Configuration Rule and started when there are many idle TCH/F channels, and there will be
Adjustment Suggestion more inner-cell handovers caused by HR fragment cleaning up. If the
threshold is decreased, HR fragment cleaning up will be started when
there are less idle TCH/F channels, and there will be less inner-cell
handovers caused by HR fragment cleaning up.

Change Mode Offline

Related features ZGO-03-02-004 HR Concentration

2-687

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters hrDfragSupport

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.100 HR channel percentage threshold


Full Name HR channel percentage threshold

Abbreviation hrTsPercentage

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When HR timeslot in the cell / general timeslot in the cell <


HRTsPercentage/100, the cell can generate new HR channel.
This parameter can be configured on BSC and BTS. When
UseCellDynHRPara is YES, use the parameter of cell. When
UseCellDynHRPara is No, use the parameter of BSC. the cell can
Description generate new HR channel.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 50

Default Value The default start threshold for dynamic HR


Configuration Reason exceeds 50%. Too many HR utility should be avoided.

The HR time slot proportion is set to control


Configuration Rule and
the utility of HR channels. The proportion of the HR channels that
Adjustment Suggestion
can be used becomes higher if the parameter is set higher.

Change Mode Offline

2-688

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-01-01-001 Half Rate

Related Parameters HRTsPercentage


UseCellDynHRPara

This parameter can be configured on both BSC and BTS. When


Relationship UseCellDynHRPar is set to Yes, HRTsPercentag of the cell is used.
When UseCellDynHRPar is set to No, HRTsPercenta of BSC is used.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.101 If support allocating channel by TA


Full Name If support allocating channel by TA

Abbreviation AllocChlByTA

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether channels in a cell are allocated for


Description BCCH and non-BCCH carriers according to the TA value.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and


Adjustment Suggestion Enable this switch according to operator requirements.

Change Mode Offline

2-689

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.102 The TA threshold of allocating channel in BCCH


Full Name The TA threshold of allocating channel in BCCH

Abbreviation TaThsOfBCCH

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the TA threshold when the channels on the


BCCH carrier are allocated.
If the TA value is lower than or equal to this threshold, the system is prior
to allocate the channels on the BCCH carrier. Otherwise, the system is
Description prior to allocate the channels on the non-BCCH carrier.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

By default, the subscribers near the BTS will


Default Value
be allocated on the BCCH carrier. During actual application, adjust
Configuration Reason
this value according to the range of cell coverage.

This parameter is relevant to cell coverage.


Configuration Rule and For metropolitan areas, this parameter is configured relatively small.
Adjustment Suggestion For suburban areas with wide cell coverage, this parameter is configured
relatively large.

2-690

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters AllocChlByTA

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.103 Support dynamic channel move


Full Name Support dynamic channel move

Abbreviation DynChMove

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

A dynamic channel can be used for both the voice service and the PS
data service. For the cells configured with static TCH channels and dy-
namic channels, the CS voice service is already prior to use static TCH
channels but occupies dynamic channels as the voice service increases.
This parameter determines whether to support the function of channel
adjustment. This function releases the CS service that occupies dynamic
Description PDCH channels and switches the service to the static TCH channel.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

2-691

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

For the cells configured with both dynamic


Configuration Rule and channels and static channels, it is recommended that this function
Adjustment Suggestion be enabled. After that, the number of channels available for the PS
service increases and the handover times in the cell increase.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.104 Idle static TCH threshold for dynamic channel move


Full Name Idle static TCH threshold for dynamic channel move

Abbreviation IdleTCHForDChMove

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

If the proportion of idle static TCH channels in a cell to all the available ser-
vice channels is higher than this threshold, the CS service that occupies
Description the dynamic PDCH channel can be switched to the static TCH channel.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

If this threshold is configured too low, it


Default Value
is easier to migrate the CS service on the dynamic channel to the
Configuration Reason
static channel.

2-692

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines the start threshold


Configuration Rule and
of dynamic channel migration. Adjusting this threshold will increase
Adjustment Suggestion
or decrease the frequency of dynamic channel migration accordingly.

Change Mode Offline

Related features N/A

Related Parameters DynChMove

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.105 UpLink Optimize Method for Assignment or Intracell


Handover
Full Name UpLink Optimize Method for Assignment or Intracell Handover

Abbreviation PwrOptAssIntraHoUl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the uplink power optimization mode in the


Description case of assignment and inner-cell handover.

Instance Cell

0: No Optimize
1: Inherit Power Before Handover
Value Range and Step 2: Optimize According To Target Level

Unit N/A

Default Value 0

Default Value
Configuration Reason Using the maximum power has certain benefits.

2-693

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When the initial power needs to be optimized for reducing interference,


Configuration Rule and users can select the power of the original channel , or the target level to
Adjustment Suggestion optimize. When the power control cannot be timely performed on the
original channel, the target level can be selected to optimize.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.106 DownLink Optimize Method for Assignment or Intracell


Handover
Full Name DownLink Optimize Method for Assignment or Intracell Handover

Abbreviation PwrOptAssIntraHoDl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the downlink power optimization mode in the


Description case of assignment and inner-cell handover.

Instance Cell

0: No Optimize
1: Inherit Power Before Handover
Value Range and Step 2: Optimize According To Target Level

Unit N/A

Default Value 0

2-694

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Using the maximum power has certain benefits.

To reduce interference by optimizing the


initial power or improve the success rate of power admission by using
the function of dynamic power sharing, it is required to inherit the
power of the original channel or optimize the power by using the target
Configuration Rule and
level.
Adjustment Suggestion
The power of the original channel is used because the
power control has been implemented on the original channel. If the
original channel does not implement power control in time, it is required
to optimize the power by using the target level.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.107 UpLink Optimize Method for Intercell Handover


Full Name UpLink Optimize Method for Intercell Handover

Abbreviation PwrOptInterHoUl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the uplink power optimization mode in the


Description case of inter-cell handover.

Instance Cell

2-695

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: No Optimize
1: Inherit Power Before Handover
Value Range and Step 2: Optimize According To Target Level

Unit N/A

Default Value 0

Default Value
Configuration Reason Using the maximum power has certain benefits.

When the initial power needs to be optimized for reducing interference,


Configuration Rule and
the power of the original channel , or the target level can be selected to
Adjustment Suggestion
optimize, which is determined by the operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.108 DownLink Optimize Method for Intercell Handover


Full Name DownLink Optimize Method for Intercell Handover

Abbreviation PwrOptInterHoDl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the downlink power optimization mode in the


Description case of inter-cell handover.

Instance Cell

2-696

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No Optimize
Value Range and Step 1: Optimize According To Target Level

Unit N/A

Default Value 0

Default Value
Configuration Reason Using the maximum power has certain benefits.

When the interference should be reduced through optimizing the initial


Configuration Rule and power, or the dynamic power sharing function is used to improve the
Adjustment Suggestion success rate of power access, the target level can be selected to
optimize.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.109 UpLink Optimize Method for Immediate Assignment


Full Name UpLink Optimize Method for Immediate Assignment

Abbreviation PwrOptImmAssUl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the uplink power optimization mode in the


Description case of immediate assignment.

Instance Cell

2-697

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value Usually, the maximum power can be used during


Configuration Reason immediate optimization.

Usually, this parameter is configured to "No".


Configuration Rule and
To reduce interference by optimizing the initial power, this parameter
Adjustment Suggestion
can be configured to "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.110 DownLink Optimize Method for Immediate Assignment


Full Name DownLink Optimize Method for Immediate Assignment

Abbreviation PwrOptImmAssDl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the downlink power optimization mode in the


Description case of immediate assignment.

Instance Cell

0: Off
Value Range and Step 1: On

2-698

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value Usually, the maximum power can be used during


Configuration Reason immediate optimization.

Usually, this parameter is configured to "No".


Configuration Rule and To reduce interference by optimizing the initial power or to improve
Adjustment Suggestion the success rate of power admission by using the function of dynamic
power sharing, this parameter can be configured to "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.111 Uplink target level


Full Name Uplink target level

Abbreviation UlTargetLevel

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the uplink target level for power optimization.
When the system uses the uplink target level for power optimization, it is
required to adjust the initial transmission power of the MS, so as to make
Description the receiving level of the BTS reach this value.

Instance Cell

Value Range and Step 0..63

2-699

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 30

Default Value Usually, -80 dBm is considered as a strong


Configuration Reason uplink receiving level.

The value can be set in accordance with the network level/quality


distribution, to ensure that the receiving quality of the level is good.
Configuration Rule and
If the value is set as too high, the effect of power optimization is not
Adjustment Suggestion
obvious. If the value is set as too low, the access of new channels
is prone to fail.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.112 Downlink target level


Full Name Downlink target level

Abbreviation DlTargetLevel

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the downlink target level for power optimiza-
tion. When the system uses the downlink target level for power optimiza-
tion, it is required to adjust the initial transmission power of the BTS, so
Description as to make the receiving level of the MS reach this value.

Instance Cell

2-700

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value Usually, -75 dBm is considered as a strong


Configuration Reason downlink receiving level.

The value can be set in accordance with the network level/quality


distribution, to ensure that the receiving quality of the level is good.
Configuration Rule and
If the value is set as too high, the effect of power optimization is not
Adjustment Suggestion
obvious. If the value is set as too low, the access of new channels
is prone to fail.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.113 Low RSSI threshold


Full Name Low RSSI threshold

Abbreviation LowRssiThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-701

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When an MS is connected to the network, the BTS checks the electricity


level of the access burst on RACH and report it to the BSC. The BSC
categorize the receiving electricity level to the following three levels
according to the LOWRSSITHS and HIGHRSSITHS thresholds: high,
medium, and low.
When RSSI<LOWRSSITHS, MSPower_Opt = MSTXPowerMax
When LOWRSSITHS=<RSSI<HIGHRSSITHS, MSPower_Opt =
MSTXPowerMax-2dB
When RSSI>=HIGHRSSITHS, MSPower_Opt = MSTXPowerMax-4dB
Considering the symmetry of uplink and downlink channels, the system
Description operations for the downlink cahnnel is the same with uplink channels.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 32

Usually, -78 dBm on the RACH channel is considered


Default Value
as a strong receiving level. In the case of immediate assignment,
Configuration Reason
the power can be decreased by 2 dB.

Setting of the value can according to the network level/quality distribution,


to ensure that the receiving quality is good when the uplink and downlink
Configuration Rule and power decreases by 2 dB, and the RACCH channel reaches this level.
Adjustment Suggestion It is recommended to set the value in a conservative manner, because
RACH signal only has one pulse, and the measurement accuracy of
signal strength is poorer than that of the dedicated channel.

Change Mode Offline

Related features N/A

Related Parameters HighRssiThs

Relationship R_BTS2.HighRssiThs > R_BTS2.LowRssiThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-702

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.114 High RSSI Threshold


Full Name High RSSI Threshold

Abbreviation HighRssiThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When an MS is connected to the network, the BTS checks the electricity


level of the access burst on RACH and report it to the BSC. The BSC
categorize the receiving electricity level to the following three levels
according to the LOWRSSITHS and HIGHRSSITHS thresholds: high,
medium, and low.
When RSSI<LOWRSSITHS, MSPower_Opt = MSTXPowerMax
When LOWRSSITHS=<RSSI<HIGHRSSITHS, MSPower_Opt =
MSTXPowerMax-2dB
When RSSI>=HIGHRSSITHS, MSPower_Opt = MSTXPowerMax-4dB
Considering the symmetry of uplink and downlink channels, the system
Description operations for the downlink cahnnel is the same with uplink channels.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 38

Usually, -72 dBm on the RACH channel is considered


Default Value
as a strong receiving level. In the case of immediate assignment,
Configuration Reason
the power can be decreased by 4 dB.

Setting of the value can according to the network level/quality distribution,


to ensure that the receiving quality is good when the uplink and downlink
Configuration Rule and power decreases by 4 dB, and the RACCH channel reaches this level.
Adjustment Suggestion It is recommended to set the value in a conservative manner, because
RACH signal only has one pulse, and the measurement accuracy of
signal strength is poorer than that of the dedicated channel.

Change Mode Offline

Related features N/A

Related Parameters LowRssiThs

Relationship R_BTS2.HighRssiThs > R_BTS2.LowRssiThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-703

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.115 Ms power inherit threshold


Full Name Ms power inherit threshold

Abbreviation MsPwrInheritThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is valid when the MS power optimization for non-rescue


handovers is enabled. When the BSC sends a handover command to the
MS for a non-rescue handover, such as PBGT handover, if the current
level is higher than the threshold, it means that the target cell has bet-
ter signal quality. In this case, the current transmit power, instead of the
Description maximum transmit power, should be used.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 27

Default Value The level value -83 dB is enough for normal


Configuration Reason services.

It is required to configure this parameter


Configuration Rule and
according to the actual application on site, network condition, and
Adjustment Suggestion
network optimization plan.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-704

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.116 Additional reselection parameter indication(SI4)


Full Name Additional reselection parameter indication(SI4)

Abbreviation additionReselPI

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The cell selection and reselection of MS depends on the C1 and C2


parameters, according to the definition in the GSM specification.
Network carriers decide if to use C2 as the cell reselection parameter.
Additional reselection parameter indication is to notify MS if C2 criterion
is adoptable during the cell reselection.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages.
Additional reselection parameter indication is one of the cell selection
parameters. Value Instruction:
Yes: MS takes off cell reselection parameter PI and the parameters
related to computing C2 from the rest bytes SI7/8 Rest Octets of
SYSTEM INFORMATION TYPE 7 or 8.
No: MS should obtain the PI parameter related to the cell reselection
and parameters related to C2 calculation from SI7/8 Rest
Octets of SYSTEM INFORMATION TYPE4.
Generally, the system messages 7 and 8 are seldom used. Normally this
parameter is No. It shall be Yes when the system adopts the
Description system messages 7 and 8, and the cell reselection uses C2.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value Re-election strategies from the field to consider a simple implementation
Configuration Reason and generally do not use SI7 and SI8 considerations

2-705

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Generally, the system messages 7 and 8 are


Adjustment Suggestion seldom used. Normally the parameter AdditionReselPI is No.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.117 Cell reselection parameter indication


Full Name Cell reselection parameter indication

Abbreviation cellReselPI

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Cell reselection parameter indication notifies the MS if to use C2 as


the cell reselection parameter and if there is the related parameter for
calculating C2.
It indicates if the related parameter for calculating cell reselection
standard C2 is contained in SYSTEM INFORMATION message and
if C2 standard is adopted in the cell reselection. The successive Cell
reselection offset, Temporary offset and Penalty time are invalid, and MS
takes C1 as the cell reselection standard when this value is No.
This parameter is broadcasted to all MS in the cell in RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages. Cell reselection
parameter indication is one of the cell selection parameters. Value
Instruction:
No: MS gets parameters to compute C1 from cell broadcast system

Description messages and regard C1 as a cell reselection standard. Parameters

2-706

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Cell bar qualify, Cell reselection offset, Temporary offset and Penalty
time are invalid.
Yes: MS should calculate C2 according to parameters extracted from
cell-broadcasting system messages, and take C2 as the standard for
cell reselection.
Enable this parameter, if related cell adopts C2 as the cell reselection
standard. Otherwise, disable it.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Re-election strategies from the field to consider a simple implementation

In the scenario with dual-frequency network


of dense urban area/urban area, it is suggested to enable C2 algorithm
Configuration Rule and of 1800 M to balance the traffic.For 900 M cell, this parameter is
Adjustment Suggestion subject to the traffic and actual configurations.Cell reselection
parameter indication should be enabled when CBA or CBQ is enabled
in the cell.

Change Mode Offline

Related features N/A

Related Parameters CellBarQualify


ReselOffset
TemporaryOffset
PenaltyTime

Parameters Cell bar qualify, Cell reselection


Relationship offset, Temporary offset and Penalty time are valid till cell reselection
parameter indication is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-707

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.118 Cell reselection offset


Full Name Cell reselection offset

Abbreviation reselOffset

Managed Object GSM Cell Configuration

3GPP Name CELL_RESELECT_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter is used at MS side. It is broadcast to MS via system


message by BTS. In the GPRS system, C32 is used as the standard
for cell reselection. C32 standard calculation, similar to C2 standard in
GSM, contains a cell reselection offset parameter.
This parameter is not necessary to append in packet system message
when the offset value is 0 dB.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason The value of the general experience of the wireless environment

Under the dual-band network scenario in the densely-populated urban


areas or urban areas, it is recommended to set this parameter as 4 to
8 for the 1800 M cell. Under the dual-band scenario in the suburb, it is
recommended to set this parameter as 0 to 5. Setting of the CRO, TO,
and PT parameters is as follows:
l. If the traffic is large or the communication quality in the cell is low for
some reason, the PenaltyTime can be set to 31, to make the MS camp
on this cell to a great extent (that is, a certain exclusiveness is acted on
the cell). Consequently, the TemporaryOffset parameter is invalid, C2
Configuration Rule and value equals to C1 minus Reseloffset, the C2 value corresponding to
Adjustment Suggestion this cell is reduced manually, and the possibility of the MS reselecting to
this cell is reduced. In addition, users can appropriately set ReselOffset
in accordance with the exclusiveness of this cell. The larger the
exclusiveness is, the larger the value of ReselOffset.
2. For the cell with low traffic and low equipment utilization, it is
recommended to set ReselOffset as 0~10 (corresponding to 0~20dB), to
make the MS operate in this cell (that is, a certain inclination is performed
on thsi cell). In this case, it is recommended to set ReselOffset in
accordance with the inclination of this cell. The larger the inclination is,
the larger the value of ReselOffset is. The value of TemporaryOffset is

2-708

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

better to be the same as or higher than that of ReselOffset. PenaltyTime


is used to prevent the MS from frequent cell reselection, and its value
is recommended to set as 1 (20 s) or 2 ( 40 s) (same as 1800 M cell
in the dual-band network).
If this parameter is too large, the terminal will select the cell with low DL
level, which leads to a decrease of coverage rate tested. Setting of CRO
can reasonably take in or exclude traffic, effectively reduce SD/TCH
congestion rate, and improve the success rate of call setup.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.119 Temporary offset


Full Name Temporary offset

Abbreviation temporaryOffset

Managed Object GSM Cell Configuration

3GPP Name TEMPORARY_OFFSET

3GPP Reference 3GPP TS 45.008

2-709

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The cell reselection due to radio channel quality takes C2 as the


standard. C2 is formed according to C1 parameter, and some special
offset parameters, to add the special influence as to enable MS to enter
some cells in priority. Usually, such measures allow balancing the traffic
on the network.
Besides C1, there are three factors affecting C2: Cell reselection offset,
Temporary offset, and Penalty time. Temporary offset indicates the
temporary modification value for C2. Temporary means that it only acts
on C2 for a period and the period depends on parameter Penalty time.
Network broadcasts the parameter information to all MSs in the cell
through RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages. It is one of the cell selection parameters. The validity of this
Description parameter depends upon Cell reselection parameter indication.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The value of the general experience of the wireless environment

It is suggested to set the parameter to 1.


Configuration Rule and
The parameter is appropriately offset within a certain penalty time
Adjustment Suggestion
to avoid frequent reselection.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-710

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.120 Penalty time


Full Name Penalty time

Abbreviation penaltyTime

Managed Object GSM Cell Configuration

3GPP Name PENALTY_TIME

3GPP Reference 3GPP TS 45.008

The cell reselection due to radio channel quality takes C2 as the


standard. C2 is formed according to C1 parameter, and some special
offset parameters, to add the special influence as to enable MS to enter
some cells in priority. Usually, such measures allow balancing the traffic
on the network.
Besides C1, there are three factors affecting C2: Cell reselection offset,
Temporary offset, and Penalty time. Temporary offset indicates the
temporary modification value for C2. Temporary means that it only acts
on C2 for a period and the period depends on parameter Penalty time.
Network broadcasts the parameter information to all MSs in the cell
through RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages. It is one of the cell selection parameters. The validity of this
Description parameter depends upon Cell reselection parameter indication.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason The value of the general experience of the wireless environment

It is suggested to set this parameter as 0


Configuration Rule and
indicating 20s. The value is only used in traffic balance conditions
Adjustment Suggestion
when it is set to 31 and CRO is a negative value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-711

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.121 Cell reselecting hysteresis level


Full Name Cell reselecting hysteresis level

Abbreviation reselHysteresis

Managed Object GSM Cell Configuration

3GPP Name CELL_RESELECT_HYSTERESIS

3GPP Reference 3GPP TS 45.008

Whenever MS moves across the two cell boundary-regions with different


location area codes, it initiates Location Update (LU) procedure in IDLE
mode.
C2 values obtained at the boundary for two adjacent cells are different
because of fading characteristic of radio channel. It causes MS to select
cell frequently. In this case, LU interval is more than cell reselection
interval. This affects call success rate, due to unreachable paging
response to calling party.
This increases the signaling flow on the network and causes radio
resources to be fully utilized. In addition, it decreases call completion rate
of the system, as MS cannot respond to paging during location update.
In addition, value difference must be greater than the value specified
in CRH.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. Cell
reselecting hysteresis level is one of the cell selection parameters.
Define Cell reselecting hysteresis level to 4 or 5 and make certain
adjustments in following cases:
Increase cell reselection parameters of adjacent cells with different LAC.
Signaling traffic overload often occurs due to large demand of services.
When the adjacent cells in different location areas have large overlapped
coverage, it is suggested to increase the CRH parameter.
If the adjacent cells with different LACs are poor in overlapped coverage,
that is, there is coverage gap, or the adjacent place is an area with few
slow moving objects such as the expressway, the CRH parameter shall
Description be set as 1 ~ 3 (that is, 2dB ~ 6dB for the CRH level).

2-712

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 0..7

Unit 2dB

Default Value 6

Default Value
Configuration Reason The value of the general experience of the wireless environment

It is recommended to set this value for cross-LAC cells to a relatively


large value, so as to reduce large amount of location updates due to
frequent reselection.If the parameter is set to a relatively large value,
Configuration Rule and number of PS reselection times in the ready status can be reduced and
Adjustment Suggestion the rate can be improved;
If CRH value is increased in the cross-LAC cell, location updates can be
reduced, SD channel congestion rate can be reduced, and call set-up
success rate can be improved.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.122 New setup cause indication


Full Name New setup cause indication

Abbreviation neci

Managed Object GSM Cell Configuration

3GPP Name NECI

3GPP Reference 3GPP TS 44.018

2-713

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The serving channels in the GSM system can be classified into channels
with full rate and channels with half rate according to GSM specifications.
Common GSM system supports channels with full rate. The network
operators decide if the network support half rate service. The new setup
reason denotes the NECI to notify MS if the area supports the half rate
service. The parameter notifies MS through the RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages and causes the value of
the meaning of channel request. NECI is one of networks functional
parameters.
Yes: half rate service access not supported by this cell;
Description Yes: half rate service access is supported by this cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason According to the site need to open

Configuration Rule and It is suggested to require for half rate application.


Adjustment Suggestion This parameter can be set as "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.123 Power offset indication


Full Name Power offset indication

2-714

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation powerOffsetInd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides if to add offset value for Control channel MAX
power level parameter while sending access request message on RACH
for Class 3 MS of GSM1800. The necessity of offset value depends
on Power offset indication, that is, this parameter decides if Power
offset indication is valid. This parameter also affects MS calculating cell
selection and cell reselection standards C1 and C2.
Network broadcasts the parameter information to MSs in the cell through
Description RIL3_RR SYSTEM INFORMATION TYPE3, 4, 7 and 8 messages.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The default is not adjusted

Configuration Rule and Class 3 MSs of GSM1800 are rare, so it is suggested


Adjustment Suggestion to keep the default value.

Change Mode Offline

Related features ZGB-02-02-007 Support of C1 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-715

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.124 Power offset


Full Name Power offset

Abbreviation powerOffset

Managed Object GSM Cell Configuration

3GPP Name POWER OFFSET

3GPP Reference 3GPP TS 45.008

According to the GSM specification, for Class 3 MS of GSM 1800, the


transmission power for sending access request message on RACH is
to the value of Control channel MAX power level plus a modified value.
Power offset specifies the modified value. It determines if this parameter
is valid.
This parameter also affects the calculation of cell selection standard
C1 and cell reselection standard C2. Network broadcasts the
parameter information to MSs in the cell through RIL3_RR SYSTEM
Description INFORMATION TYPE3, 4, 7 and 8 messages.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 0

Default Value
Configuration Reason The default is not adjusted

Configuration Rule and Class 3 MSs of GSM1800 are rare, so it is suggested


Adjustment Suggestion to keep the default value.

Change Mode Offline

Related features ZGB-02-02-007 Support of C1 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-716

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.125 Priority threshold


Full Name Priority threshold

Abbreviation prio_Thr

Managed Object GSM Cell Configuration

3GPP Name PRIO_THR

3GPP Reference 3GPP TS 44.018

The parameter information is broadcast to MS through SI4, SI6 and SI7


messages. This parameter is correlated with RXLEV_ACCESS_MIN, and
Description is used for calculation of C4 standard.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 1

Default Value
Configuration Reason Configuration according to the range starting value

The parameter impacts in PBCCH channel configuration,


Configuration Rule and
and C31 and C32 re-selection standards. It is not recommended to be
Adjustment Suggestion
used.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-717

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.17.126 LSA Offset


Full Name LSA Offset

Abbreviation lsa_Offset

Managed Object GSM Cell Configuration

3GPP Name LSA_OFFSET

3GPP Reference 3GPP TS45.008

System broadcasts the parameter information to MS through SI4, SI6 and


SI7 messages. This parameter defines the offset value for LSA reselec-
Description tion between two cells with the same LSA priority.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Consider not support LSA

Configuration Rule and


Adjustment Suggestion The LSA services are not supported.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.127 Additional reselection parameter indicator(SI3)


Full Name Additional reselection parameter indicator(SI3)

2-718

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation addResPI2

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The cell selection and reselection by an MS depends on C1 and c3.


Whether to use C2 as the reselection paramter is decided by the network
service provider. AdditionReselPI (Additional Reselect Param Ind
ACS) is used to inform MS whether to apply C2 during the cell reselction.
This parameter is broadcast to MSs in a cell through a RIL3_RR
SYSTEM INFORMATION TYPE3 or RIL3_RR SYSTEM INFORMATION
TYPE4 message. for the parameter value, refer to the following:
No: If the rest bytes of SYSTEM INFORMATION TYPE4 (SI4 Rest
Octets) exists, the MS need to take the PI and C2 parameters;
Yes: The MS need to take the PI parameter and calculate the C2
parameter from rest byte of SYSTEM INFORMATION TYPE7 or
Description SYSTEM INFORMATION TYPE8 (SI7/8 Rest Octets)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Generally, system information TYPE 7 and TYPE 8 are rarely used, this
Default Value
parameter must be set as No, otherwise some MS (for example NEC)
Configuration Reason
are not able to access the network.

Generally, system messages TYPE 7 and TYPE


Configuration Rule and
8 are rarely used. This parameter must be set as No, otherwise some
Adjustment Suggestion
MSs (for example NEC) are unable to access the network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-719

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17.128 MAX value of MS Radio link timeout


Full Name MAX value of MS Radio link timeout

Abbreviation msRadioLkTmOut

Managed Object GSM Cell Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter is the maximum value of radio link counter S at Ms side,


transmitted on BCCH or SACCH by BSS.
Radio link counter S is used to evaluate radio linkd failure. When MS
can't decode SACCH message (BFI=1), S decrements; when MS
successfully receives SACCH message (BFI=0), S increases by 2. If S
is decreased to 0, it indicates radio link fault, call shall be reestablished
Description or released.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit SACCH mf

Default Value 15

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

2-720

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.129 Radio link failure criterion


Full Name Radio link failure criterion

Abbreviation conFailCriterion

Managed Object GSM Cell Configuration

3GPP Name Connection Failure Criterion

3GPP Reference 3GPP TS 12.12

The network side (BTS) may judge if the radio link fails according to two
criteria: One is based on the uplink SACCH error rate and the other
is based on measured value of RXLEV/RXQUAL. Radio link failure
criterion determines the method that the BTS uses as the standard to
judge connection failure.
If SACCH error rate is used as the standard to judge connection failure,
BTS uses the same value of Radio link timeout and the same process
as MS does. Thus, BTS avoids inconsistent judgment standards in the
uplink and downlink directions. Meanwhile, the Receiving level threshold
Description and Receiving quality threshold parameters are invalid.

2-721

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the measured value of RXLEV/RXQUAL is used as the standard to


judge connection failure, BTS will use the two parameters: Receiving
level threshold (RxLevThs) and Receiving quality threshold (RxQualThs).
The Value Range is as follows:
1: Uplink SACCH Error Rate Based (in order to ensure the same
judgment standard in the uplink and downlink directions);
2: RXLEV/RXQUAL Measurement Based

Instance Cell

1: Uplink SACCH Error Rate Based


Value Range and Step 2: RXLEV/RXQUAL Measurement Based

Unit N/A

Default Value 1

Default Value
Configuration Reason Using the same criteria as MS

Configuration Rule and


Adjustment Suggestion It is recommended to use the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.130 MAX value of BSS Radio link timeout


Full Name MAX value of BSS Radio link timeout

Abbreviation bsRadioLkTmOut

Managed Object GSM Cell Configuration

3GPP Name RADIO_LINK_TIMEOUT

2-722

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter determines the maximum value of radio link counter S at


Description the BSS side. It is used in the same way as MsRadioLKTmOut.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit SACCH mf

Default Value 15

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is directly correlated with the


Configuration Rule and call drop rate. The higher the value, the lower the call drop rate.
Adjustment Suggestion To improve the KPI of call drop rate, this parameter can be configured
to a large value. However, it has negative impact on user perception.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-723

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.131 Receiving level threshold


Full Name Receiving level threshold

Abbreviation rxLevThs

Managed Object GSM Cell Configuration

3GPP Name RXLEV

3GPP Reference 3GPP TS 12.12

The network side (BTS) may judge if the radio link fails according to two
criteria: One is based on the uplink SACCH error rate and the other is
based on measured value of RXLEV/RXQUAL.
The radio link is considered as failed if BTS detects one of the following
conditions: The uplink receiving level is smaller than a certain threshold;
The uplink receiving quality is greater than a certain threshold. This
only applies, if the measured value of RXLEV/RXQUAL is used as
the standard to judge a connection failure. Receiving level threshold
specifies the threshold of receiving level.
This parameter is invalid if uplink SACCH error rate is used as the
standard to judge connection failure (Radio link failure criterion is 1).
Description Receiving level threshold is one of the configuration parameters of BTS.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 10

Default Value
Configuration Reason Due to the practical application of the net

Configuration Rule and This parameter indicates the level threshold


Adjustment Suggestion to determine the radio link fault.

Change Mode Offline

Related features N/A

Related Parameters ConFailCriterion

This parameter is invalid when ConFailCriterion


Relationship
is set as "RXLEV/RXQUAL Measurement Based".

Related Interfaces Abis

2-724

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.132 Receiving quality threshold


Full Name Receiving quality threshold

Abbreviation rxQualThs

Managed Object GSM Cell Configuration

3GPP Name RXQUAL

3GPP Reference 3GPP TS 12.12

The network side (BTS) may judge if the radio link fails according to
two criteria. One is based on uplink SACCH error rate, and the other is
based on measured value of RXLEV/RXQUAL.
If the measured value of RXLEV/RXQUAL is used as the standard to
judge a connection failure, the radio link will be considered as failed
when BTS detects that the uplink receiving level is smaller than a
certain threshold or the uplink receiving quality is greater than a certain
threshold. Receiving quality threshold specifies the receiving threshold
quality.
If the uplink SACCH error rate is used as the standard to judge a
connection failure, this parameter is invalid. This parameter is one of the
Description configuration parameters of BTS.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 6

Default Value
Configuration Reason Due to the practical application of the net

Configuration Rule and This parameter indicates the level threshold


Adjustment Suggestion to determine the radio link fault.

Change Mode Offline

2-725

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters ConFailCriterion

This parameter is invalid when ConFailCriterion


Relationship
is set as "RXLEV/RXQUAL Measurement Based".

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.133 Radio link failure checking period


Full Name Radio link failure checking period

Abbreviation rxLevQualPrd

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 12.12

This parameter indicates the period to detect radio link failure at the net-
work side (in the unit of SACCH multiframe), including the detection of
channel strength (dBm) and signal quality received by each channel. This
parameter is invalid if "Uplink SACCH Error Rate Based" is used as the
Description criteria to judge a connection failure.

Instance Cell

Value Range and Step 1..63

Unit SACCH mf

Default Value 63

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is directly correlated with the


Configuration Rule and call drop rate. The higher the value, the lower the call drop rate.
Adjustment Suggestion To improve the KPI of call drop rate, this parameter can be configured
to a large value. However, it has negative impact on user perception.

2-726

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters ConFailCriterion

This parameter is invalid when ConFailCriterion


Relationship
is set as "RXLEV/RXQUAL Measurement Based".

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.134 BCCH switch allowed


Full Name BCCH switch allowed

Abbreviation CanBcchExch

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter decides whether the cell allows BCCH switch.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Turn on this switch when the BCCH switchover


function needs to be enabled. After the BCCH switchover function is
Configuration Rule and
enabled, BCCH carrier frequency switchover will be triggered if BCCH
Adjustment Suggestion
carrier frequency comes across faults, to avoid the service quit of
cell.

2-727

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-03-04-001 Automatic BCCH Recovery

Related Parameters CanBCCHEx

The dynamic BCCH shift function only takes effect when the functional
Relationship
switch of the BSC and that of the cell are both enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.135 Dynamic configuration SDCCH


Full Name Dynamic configuration SDCCH

Abbreviation CanSdcchDyn

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether the cell allows SDCCH dynamic config-
Description uration.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Turn on this switch when the SDCCH switchover


Configuration Rule and function needs to be enabled. After the cell dynamic SDCCH switchover
Adjustment Suggestion has been enabled, dynamic SDCCH channel handover will be triggered
during cell location update to lower SDCCH channel congestion rate.

2-728

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGB-03-02-003 Dynamic Configuration of SDCCH

Related Parameters CanSDCCHDyn

The cell switchover takes effect only when BSC switch and the cell level
Relationship
switch should be turned on at a same time.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.136 Baseband frequency hopping TRX exchange support


Full Name Baseband frequency hopping TRX exchange support

Abbreviation SupBBHopExChange

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the base band hopping switch-over is


supported. This function is supported only when the all switches at the
BSC level and Cell level are all enabled. When a carrier of the base band
hopping group is in fault, the system will automatically move and keep the
Description faulty frequency out of the group until it resumes.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This parameter is a switch for a function.


Configuration Reason It is turned off by default.

2-729

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The cell that is configured with base band


Configuration Rule and
hopping should enable this function to avoid the impact caused by
Adjustment Suggestion
the faulty carrier frequency.

Change Mode Offline

Related features N/A

Related Parameters BHTESupp

A cell supports the base band frequency hopping


switch-over only when the switches in BSC level and cell level
Relationship
parameters
are set "Yes".

Related Interfaces Abis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.137 Start PA power off


Full Name Start PA power off

Abbreviation StartPAPowerOff

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is to save energy and reduce consumption. BTS system


can turn off PA offset voltage while close power for idle timeslots. If the
configuration is conducted on BTS, FPGA can determine whether PA off-
Description set voltage shall be turned off.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

2-730

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Turn on this switch when needed.

Change Mode Offline

Related features ZGO-04-04-003 Intelligent Timeslot Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.138 Switch flag of cell TRX power off


Full Name Switch flag of cell TRX power off

Abbreviation StartTRXPowerOff

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description It marks whether "Switch Flag of Cell TRX Power Off" is enabled.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-731

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When the function is enabled, the BTS will


Configuration Rule and
reduce the traffic to a certain extent and will shut down part of
Adjustment Suggestion
the transceiver functions for power saving.

Change Mode Offline

Related features ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.139 Start PA output voltage tuning


Full Name Start PA output voltage tuning

Abbreviation StartPAOutVolTuning

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the TRX starts the function of adjusting
Description PA voltage based on BTS output power.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and If this function is enabled, BTS will adjust


Adjustment Suggestion PA voltage based on the output power.

2-732

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.140 Enable RRU of cell power off


Full Name Enable RRU of cell power off

Abbreviation RRUPOWEROFF

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the power-off of RRUs is enabled in a


cell. When the RRU power-off is enabled, some TRXs can be turned off
for energy saving and consumption reducing when the traffic is not busy
Description in the cell (such as midnight).

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-733

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When the cell RRU switch-off function needs


Configuration Rule and to be enabled, this parameter should be set to "Yes". After this function
Adjustment Suggestion is enabled, idle state RRU will shut down part of its function for
electricity saving. When the traffic increases, power on RRU.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.141 The switch of CIR report


Full Name The switch of CIR report

Abbreviation ReportCIR

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether CIR (C/I value) is included in the mea-
surement report. CIR information can be obtained in "C/I measurement"
Description and "carrier frequency measurement".

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a switch for a special function. The


Configuration Reason switch is disabled by default.

2-734

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion The functional switch is turned on when needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.142 The L2 frame of Lapdm fill random value


Full Name The L2 frame of Lapdm fill random value

Abbreviation LapdmL2Cfg

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies whether the LAPDm L2 frame is filled with a


random value.
The LAPDm L2 frame used to be filled with a fix value (00101011). Due
to the fixed value, a call may be easily decrypted and listened to by other
persons. The LAPDm L2 frame filled with a random value makes a call
Description difficult to be decrypted and ensures the conversation security.

Instance Cell

0: no, meaning that only fixed value 0x2B can be filled


Value Range and Step 1: yes, meaning that random values can be filled

Unit N/A

Default Value 0

2-735

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value In most cases the encryption is disabled, so


Configuration Reason no fill-in value is needed.

Configuration Rule and When the encryption is enabled, L2 fill-in


Adjustment Suggestion frames in Lapdm should be selected to avoid wiretapping.

Change Mode Offline

Related features ZGO-06-02-002 Random Fill Bits

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.143 MR Report Time Bmp


Full Name MR Report Time Bmp

Abbreviation mrRptTimeBmp

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter provides a check function about 0 ~ 23 time points. You


can enable measurement data report at different points. Each time point
indicates a hour, within 0 ~ 23 hours.
Only if checking corresponding time and enabling report function about
Description measurement report data, MR data can be reported.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

2-736

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Set this parameter according to the time needed
Adjustment Suggestion by MR collection.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.144 Support intelligent cell shutting down


Full Name Support intelligent cell shutting down

Abbreviation CellShuttingDown

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameters specifies whether a cell supports intelligent cell


shutdown.
If the coverage area of a 900M cell covers that of an 1800M cell in a
dual-band network, the BSC starts shutting down TRXs when detecting
that the traffic in the 1800M cell meets the condition for TRX shutdown
during the allowed period. The BCCH TRX is the last TRX to be shut
Description down. It is shut down when no traffic exists in the cell.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

2-737

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

In a dual-band network, if the 1800M cell is


Configuration Rule and
covered by another cell such as a 900M cell, this function can be
Adjustment Suggestion
enabled according to operator requirements.

Change Mode Offline

Related features ZGO-04-04-007

Related Parameters StartTRXPowerOff

The intelligent cell shutdown function is enabled until the intelligent


Relationship
carrier shutdown function is enabled.

Related Interfaces N/A

Impact on Equipment 1

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.17.145 Upper GGsmCell DN


Full Name Upper GGsmCell DN

Abbreviation refGGsmCell

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameters indicates the DN of the upper cell that covers the local
cell (1800M cell). If the upper 900M cell is referenced when the intelligent
cell shutdown function enabled, the local cell shuts down or starts up the
Description BCCH TRX in accordance with the traffic in the 900M cell.

Instance Cell

Value Range and Step None

Unit N/A

2-738

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value NA

Default Value
Configuration Reason The intelligent cell shutdown function is disabled by default.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features ZGO-04-04-007

Related Parameters CellShuttingDown

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.146 Mobile Originated Short Message Intercept


Full Name Mobile Originated Short Message Intercept

Abbreviation MOSmsIntercept

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Mobile Orignated Short Message Intercept

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-739

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Generally, disable this function. Enable it if required by the telecom
Adjustment Suggestion operator.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.147 Mobile Terminated Short Message Intercept


Full Name Mobile Terminated Short Message Intercept

Abbreviation MTSmsIntercept

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Mobile Terminated Short Message Intercept

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Generally, disable this function. Enable it if required by the telecom
Adjustment Suggestion operator.

Change Mode Offline

2-740

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.148 Diversity Combine Mode


Full Name Diversity Combine Mode

Abbreviation DivCombMode

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the diversity combine mode. The IRC mode,
which remedies the weakness of the MRC mode, can eliminate interfer-
ence signals when combining the expired signals. The EIRC mode is
better than the IRC mode in co-frequency interference-limited scenarios
Description but worse than the IRC mode in noise-limited scenarios.

Instance Cell

0: MRC
1: IRC
Value Range and Step 2: EIRC

Unit N/A

Default Value 1

Default Value This mode is applicable in different scenarios. When interference


Configuration Reason condition is not clear, IRC is recommended.

2-741

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The IRC mode improves MRC by eliminating interference signals at the


time of combining expected signals. ERIC has a better performance
than IRC in scenarios when co-frequency interference is limited, but a
worse performance than IRC in scenarios when noise is limited.
Configuration Rule and
By default, this parameter is set to 1, meaning IRC. This is applicable in
Adjustment Suggestion
multiple scenarios. When the actual interference condition is not clear,
IRC is recommended.
When the scenario is determined to be co-frequency interference, set
the parameter to EIRC.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.149 Joint Source-Controlled Channel Decoding Switch


Full Name Joint Source-Controlled Channel Decoding Switch

Abbreviation JSCCDSwitch

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Joint source-controlled channel decoding can promote decoding perfor-


mance and voice quality in poor channel environment to improve sub-
Description scriber satisfaction with voice service.

Instance Cell

2-742

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

In poor channel environment, joint source-controlled channel decoding


can enhance decoding performance and voice quality to meet subscriber
Configuration Rule and voice requirement. In good channel environment, joint source-controlled
Adjustment Suggestion channel decoding consumes more Digital Signal Processing (DSP)
operation resources to decrease other services but voice quality is not
greatly improved.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.150 Joint Source-Controlled Channel Decoding


Full Name Joint Source-Controlled Channel Decoding

Abbreviation JSCCD

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates an algorithm of joint source-controlled channel


Description decoding.

2-743

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

1:Inter Frame
Value Range and Step 2:Inter-Intra Frame

Unit N/A

Default Value 2

Default Value
Configuration Reason A higher decoding gain is required.

Intra-frame predictive algorithm is simple and a lower gain is obtained.


Configuration Rule and
Interframe predictive algorithm, including interframe and intra-frame
Adjustment Suggestion
prediction, is complicated and a higher gain is obtained.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters JSCCDSwitch

Relationship JSCCDSwitch enables or disables the function.

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.151 IBS time bitmap


Full Name IBS time bitmap

Abbreviation DownPowerBmp

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-744

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates a time bitmap whether to enable power-on or


power-off. The value "0 23 BIT" corresponds to the time 0 23. The
BIT value "1" indicates that power-on or power-off can be performed at
this time. The BIT value "0" indicates that power-on or power-off cannot
Description be performed at this time.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

Default Value
Configuration Reason The default value is set to periods of idle time of traffic.

Configuration Rule and The default value is recommended. The value can be set to a period of
Adjustment Suggestion idle time of traffic in accordance with perform statistics.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.152 Cell shuttingdown based on traffic load


Full Name Cell shuttingdown based on traffic load

Abbreviation PwDownLoadInd

Managed Object GSM Cell Configuration

3GPP Name N/A

2-745

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter determines whether to enable cell power-off based on


Description service load.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Two common power-off modes are optional: based on loads and


Default Value
not based on loads. The function is disabled by default, and the
Configuration Reason
corresponding value is set to 1.

Configuration Rule and If power-off not based on loads is required, the parameter is set to 0. If
Adjustment Suggestion power-off based on loads is required, the parameter is set to 1.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.153 Support implicit reject in assignment


Full Name Support implicit reject in assignment

Abbreviation SuppImplicitReject

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-746

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether an implicit access rejection field is


carried in a direct assignment message. The terminal supporting the im-
plicit rejection function determines whether to initiate an implicit rejection
Description flow when initiating an access request.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

Configuration Rule and If the function needs to be enabled, the parameter is set to 1. If not,
Adjustment Suggestion the parameter is set to 0.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.154 Implicit reject CS and PS


Full Name Implicit reject CS and PS

Abbreviation ImpltRejCsAndPs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-747

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates an implicit rejection field carried in a direct as-


signment message. The field means implicitly rejecting an access to a
Description terminal with low access priority.

Instance Cell

0:Not implicit reject CS and PS


1:Implicit reject PS
2:Implicit reject CS
Value Range and Step 3:Implicit reject CS and PS

Unit N/A

Default Value 1

Default Value This parameter is set in according with service importance and
Configuration Reason lower-priority service rejection in service congestion.

Configuration Rule and The parameter is set in accordance with an actual requirement for
Adjustment Suggestion implicitly rejecting an access to low-priority CS and PS service.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.155 Support broadcasting EAB


Full Name Support broadcasting EAB

Abbreviation SuppBroadcastEAB

Managed Object GSM Cell Configuration

3GPP Name N/A

2-748

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter determines whether to support broadcasting an Enhanced


Description Address Book (EAB) message by SI 21.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

Configuration Rule and If the function needs to be enabled, the paramter is set to 1. If not ,the
Adjustment Suggestion parameter is set to 0.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.156 EAB Subcategory


Full Name EAB Subcategory

Abbreviation EABSubcategory

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-749

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates a terminal category for which the EAB authority
Description code is applicable.

Instance Cell

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value The parameter is applicable for all terminals configured with an EAB
Configuration Reason by default.

Configuration Rule and


Adjustment Suggestion The parameter is set in accordance with actual planning.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.157 EAB Authorization Mask


Full Name EAB Authorization Mask

Abbreviation EABAuthorizeMask

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the category of access-forbiden terminals con-


Description figured with an EAB in a corresponding flow control level.

Instance Cell

2-750

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..1023

Unit N/A

Default Value [0,1,3,7,15,31,63,127,255,511,1023,1023,1023]

If there is no flow control, the terminal configured with an EAB can be


accessed. A lower flow control level corresponds to less categories of
Default Value
access-forbidden terminals configured with an EAB. A higher flow control
Configuration Reason
level corresponds to more categories of access-forbidden terminals
configured with an EAB.

Configuration Rule and


Adjustment Suggestion The parameter is set in accordance with actual planning.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.158 EAB Position


Full Name EAB Position

Abbreviation EABPosition

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates a broadcasting position of SI 21.

Instance Cell

2-751

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:Normal
Value Range and Step 1:Extend

Unit N/A

Default Value 0

Default Value
Configuration Reason The default broadcasting position is BCCH Normal.

Configuration Rule and


Adjustment Suggestion The broadcasting position of SI 21 is set as required.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.159 NCC Config Parameter


Full Name NCC Config Parameter

Abbreviation NccCfgPara

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates neighbor coordination configuration.

Instance Cell

0:Nonsupport NCC
Value Range and Step 1:Support NCC

Unit N/A

2-752

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value The neighbor cell coordination function is supported only in


Configuration Reason SDRV4.11.13.

If the serving cell and a neighbor cell of an MS are located in a base


Configuration Rule and
station, NCC can combine received processing signals to enhance voice
Adjustment Suggestion
quality.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.160 RxQual Threshlod


Full Name RxQual Threshlod

Abbreviation RQThreshold

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the uplink RQ threshold.

Instance Cell

2-753

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:bit error rate under 0.2%


1:bit error rate between 0.2%~0.4%
2:bit error rate between 0.4%~0.8%
3:bit error rate between 0.8%~1.6%
4:bit error rate between 1.6%~3.2%
5:bit error rate between 3.2%~6.4%
6:bit error rate between 6.4%~12.8%
Value Range and Step 7:bit error rate over 12.8%

Unit N/A

Default Value 0

Default Value The neighbor cell coordination function is supported only in


Configuration Reason SDRV4.11.13.

The value should be equal to or less than RQThreshold during handover.


Configuration Rule and
If the RQ reported by an MS is greater than RQThreshold, the
Adjustment Suggestion
NccCfgPara function is enabled.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.161 TCH Allocation Threshold For Dual-Frequency Network


Full Name TCH Allocation Threshold For Dual-Frequency Network

Abbreviation DualFreqNetTchThs

Managed Object GSM Cell Configuration

3GPP Name N/A

2-754

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter indicates a traffic channel allocation threshold of a cell in


Description a dual-frequency network.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 50

Directional re-handover to the associated cell in a dual-frequency


Default Value
network is considered only when the local cell has an appropriate traffic
Configuration Reason
load.

If the local cell has great interference, the threshold should be adjusted
Configuration Rule and
to a lower value to ensure of directional re-handover to the associated
Adjustment Suggestion
cell in a dual-frequency network

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.162 Um soft Synchronous Support


Full Name Um soft Synchronous Support

Abbreviation UmSynSupport

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-755

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether the cell participates in a collection of


Description clock difference inforation in the soft synchronization of air-interface clock.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value The parameter is disabled if enabling the parameter is not required on
Configuration Reason site.

If the cell needs to participate in a collection of clock difference


Configuration Rule and
information in the soft synchronization of air-interface clock, the function
Adjustment Suggestion
is enabled. If not, the function is disabled.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters Gumsyn.UmSynSupport

The cell-level switch is enabled when Gumsyn.UmSynSupport is


Relationship
enabled.

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.163 Is Enhanced Dual-Frequency Network Support


Full Name Is Enhanced Dual-Frequency Network Support

Abbreviation IsDualFreqSup

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-756

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether a cell supports an enhanced dual-


Description frequency network.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Only specified cells support a dual-frequency network.

Configuration Rule and The function is enabled when the cell is associated with a cell in a
Adjustment Suggestion dual-frequency network.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.164 SubCell Channel Allocation Control


Full Name SubCell Channel Allocation Control

Abbreviation CSAllocSC

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates a priority of subcell channel allocation.

Instance Cell

2-757

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:SubCell2 as preferred channel allocation subCell


Value Range and Step 1:SubCell1 as preferred channel allocation subCell

Unit N/A

Default Value 0

Default Value
Configuration Reason The second cell is prior to acquire traffic.

Configuration Rule and If the first subcell needs to be assigned preferentially, the parameter
Adjustment Suggestion should be set to subcell 1 for channel allocation.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.165 Use Uniform Power Control


Full Name Use Uniform Power Control

Abbreviation UseUniformPwrCtrl

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a new power control parameter is


Description used to unify the power control algorithm.

Instance Cell

0: No
Value Range and Step 1: Yes

2-758

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value The function is disabled by default to ensure compatibility of base station
Configuration Reason versions.

Configuration Rule and The function is enabled when the new power control parameter needs
Adjustment Suggestion to be used.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.17.166 Longitude
Full Name Longitude

Abbreviation Longitude

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Longitude

Instance Cell

Value Range and Step -180.00000..180.00000

Unit N/A

Default Value 180.00000

2-759

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.167 Latitude
Full Name Latitude

Abbreviation Latitude

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Latitude

Instance Cell

Value Range and Step -90.00000..90.00000

Unit N/A

Default Value 90.00000

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

2-760

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.168 Altitude
Full Name Altitude

Abbreviation altitude

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Antenna altitude

Instance Cell

Value Range and Step 0..32767

Unit m

Default Value 0

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-761

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.169 Offset Angle


Full Name Offset Angle

Abbreviation offsetAngle

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Antenna azimuth

Instance Cell

Value Range and Step 0..360

Unit

Default Value 0

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-762

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.170 Site location


Full Name Site location

Abbreviation address

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Site address

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value NA

Default Value
Configuration Reason N/A

Configuration Rule and


Adjustment Suggestion It depends on the actual planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-763

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17.171 Immediate assignment maximum delay times


Full Name Immediate assignment maximum delay times

Abbreviation IAMAXDelayTimes

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Maximum delay times of immediate assignment

Instance Cell

Value Range and Step 0..9

Unit N/A

Default Value 3

Default Value
Configuration Reason The maximum delay times are 3.

The larger the value of this parameter, the more the times of delaying
Configuration Rule and
the transmission of immediate assignment messages and the less the
Adjustment Suggestion
preemption of immediate assignment messages to paging messages.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-764

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.172 Filter Exceed Traffic threshold NCell


Full Name Filter Exceed Traffic threshold NCell

Abbreviation FiltExcdThsNCell

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of non-emergency handover, "FiltExcdThsCell" is supported to


determine whether to filter the neighbor cells whose traffic load exceeds the
Description threshold. The switch does not depend on the dynamic priority switch.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value In the case of non-emergency handover, the neighbor cells whose traffic
Configuration Reason load exceeds the threshold are not filtered by default.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.173 Emergency Handover use Dynamic Priority


Full Name Emergency Handover use Dynamic Priority

2-765

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation EmergHoDynPrio

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When the cell parameter "hoControlPrioChg" is enabled, this parameter de-


termines whether to calculate the dynamic priority of a neighbor cell in the
Description case of emergency handover.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value By default, the dynamic priority adjustment of emergency handover is


Configuration Reason disabled.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.174 Assign strategy for Cobcch


Full Name Assign strategy for Cobcch

Abbreviation SubCellAssign

Managed Object GSM Cell Configuration

2-766

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

When the COBCCH function is enabled in the field, there are usually few
channels on the first subcell. In this case, the system tries to make users
borne on the second subcell and assigns users to the second subcell when
the pass loss or TA meets requirements. However, the signals measured
on the SDCCH channel of the first subcell are local signals. Sometimes,
it is inaccurate to use the measurement result to calculate path loss and
determine whether to assign users to the second subcell. As a result, the
assignment success rate is low. To solve this problem, assignment only in
the first subcell is supported. To use this assignment mode, the channels in
the first subcell must be sufficient and the customer requires to improve the
assignment success rate. After the assignment is complete, the users that
meet the requirements of the second subcell are switched to the second
subcell through cell handover. This parameter determines the assignment
Description mode used.

Instance Cell

Value Range and Step 0:According to Radio Measure 1:Only Subcell1

Unit N/A

Default Value 0

In most of application scenarios, the MSs that meet requirements are


Default Value
expected to be assigned to the second subcell, so as to avoid congestion
Configuration Reason
in the first subcell.

This parameter is usually set to "According to Radio Measure". This


Configuration Rule and parameter can be set to "Only Subcell1" when the channels in the first
Adjustment Suggestion subcell are sufficient (not easy to cause congestion) and the assignment
success rate needs to be improved.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-767

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.175 Arf power reduce function switch


Full Name Arf power reduce function switch

Abbreviation SupportArfPwrReduce

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of the GU co-frequency and common mode, the Burst transmit
power of UMTS neighbor frequencies can be compressed on the basis of
power control through the characteristics of GSM frequency hopping and
interleaving. This aims to reduce the interference brought by GSM signals
Description to UMTS signals.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the switch is off.

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

2-768

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.176 SupportBtsBcchExchg
Full Name SupportBtsBcchExchg

Abbreviation SupportBtsBcchExchg

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter helps select the target BCCH carrier on the BTS and notify
the BSC to migrate traffic so as to ensure that no call drop occurs during
Description cell handover.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The switch is on only when the BCCH handover is enabled.

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

2-769

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.17.177 Stop power Reduce Level Threshold


Full Name Stop power Reduce Level Threshold

Abbreviation StopPwrReduceThs

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Power compression is not implemented if the actual value is lower than this
Description threshold.

Instance Cell

Value Range and Step 0..15

Unit 0.5db

Default Value 6

Default Value
Configuration Reason The interference to UMTS is reduced and the impact on GSM is small.

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-770

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.17.178 Reduce Power Step


Full Name Reduce Power Step

Abbreviation ReducePower

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Power compression amplitude allowed for frequency points

Instance Cell

Value Range and Step 0..12

Unit 0.5db

Default Value 6

Default Value
Configuration Reason The interference to UMTS is reduced and the impact on GSM is small.

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.179 Reduce Power Arfcn


Full Name Reduce Power Arfcn

Abbreviation PowerReduceARFCN

Managed Object GSM Cell Configuration

2-771

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Frequency point, requiring power compression

Instance Cell

Value Range and Step 0..1023,65535

Unit

Default Value [65535,65535]

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.180 Prom power step


Full Name Prom power step

Abbreviation AVGPromPower

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Non-compressed frequency point, requiring power amplitude compression

Instance Cell

2-772

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..2

Unit 0.5db

Default Value 1

Default Value
Configuration Reason 1 dB

Configuration Rule and


Adjustment Suggestion N/A

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.181 Non Emergency Handover use Dynamic Priority


Full Name Non Emergency Handover use Dynamic Priority

Abbreviation NonEmergHoDynPrio

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When the cell parameter "hoControlPrioChg" is enabled, this parameter de-


termines whether to calculate the dynamic priority of a neighbor cell in the
Description case of non-emergency handover.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

2-773

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value By default, the dynamic priority adjustment of non-emergency handover


Configuration Reason is disabled.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.17.182 Immediate assignment occupy PCH option


Full Name Immediate assignment occupy PCH option

Abbreviation PCHOccupyOpt

Managed Object GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

When the switch is on, the immediate assignment messages of the BTS do
not preempt the PCH block if they can be all sent on the AGCH block at the
Description next 51 multiframe.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value By default, the switch is off. Keep it the same as that in the previous
Configuration Reason version.

2-774

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When the function is enabled, the number of times that immediate


Configuration Rule and
assignment messages preempt paging messages is reduced but the
Adjustment Suggestion
transmission of immediate assignment messages is delayed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GSM Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.18 Cell Precise Paging


Configuration(GCellPrecisePaging)
2.18.1 Cell Precise Paging Configuration ID
Full Name Cell Precise Paging Configuration ID

Abbreviation GCellPrecisePaging

Managed Object Cell Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

Description Cell Precise Paging Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

2-775

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Precise Paging Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.18.2 Adopt Precise Paging for Circuit Switched Service


Full Name Adopt Precise Paging for Circuit Switched Service

Abbreviation csPrecisePag

Managed Object Cell Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether exact paging is applied for the CS


Description service when the last service of a subscriber belongs to this cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

In most cases, the BSC switch can be used to


Default Value
control the function of exact paging. Therefore, the function of exact
Configuration Reason
paging for the cell CS service is enabled by default.

Configuration Rule and For the cells with subscribers moving quickly,
Adjustment Suggestion the function of exact paging can be disabled.

2-776

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-02-01-003

Related Parameters PrecisePagSupport

The precise paging (foreground) is used only when the BSC-level and
Relationship
cell-level switches are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.18.3 Adopt Precise Paging for Packet Switched Service


Full Name Adopt Precise Paging for Packet Switched Service

Abbreviation psPrecisePag

Managed Object Cell Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether exact paging is applied for the CS


Description service when the last service of a subscriber belongs to this cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

In most cases, the BSC switch can be used to


Default Value
control the function of exact paging. Therefore, the function of exact
Configuration Reason
paging for the cell PS service is enabled by default.

Configuration Rule and For the cells with subscribers moving quickly,
Adjustment Suggestion the function of exact paging can be disabled.

Change Mode Offline

2-777

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-02-01-003

Related Parameters PrecisePagSupport

The precise paging (foreground) is used only when the BSC-level and
Relationship
cell-level switches are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.18.4 VPC Age Time


Full Name VPC Age Time

Abbreviation vpcAgeTime

Managed Object Cell Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

When the time since the last service of a subscriber occurs exceeds the
aging time configured in this parameter, the VPC cell will not be used as a
cell for exact paging. If this parameter is configured to 0, it indicates that
Description the VPC is valid permanently.

Instance Cell

Value Range and Step 0..65535

Unit min

Default Value 0

Default Value Usually, if no subscriber is found in the new


Configuration Reason cell, the subscriber must be in the original cell.

Usually, this parameter can be configured to


be valid permanently. If this parameter is configured to another value,
Configuration Rule and
the moving speed of subscribers must be taken into consideration.
Adjustment Suggestion
To be specific, the time for the subscribers to move out of the VPC
must be calculated.

2-778

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-02-01-003

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710C

Parameter Modifying
Detail New

2.18.5 Paging Hole Timer


Full Name Paging Hole Timer

Abbreviation pagHoleTimer

Managed Object Cell Precise Paging Configuration

3GPP Name N/A

3GPP Reference N/A

When the paging time since the service is triggered last time does not
Description beyond the time specified in the timer, start the paging blackhole counter.

Instance Cell

Value Range and Step 1..65535

Unit N/A

Default Value 180

Default Value In most cases, subscribers will not leave the


Configuration Reason cell within three minutes after using services in the cell.

It is required to configure this parameter


Configuration Rule and
according to the moving speed of subscribers in the cell. The faster
Adjustment Suggestion
the moving speed of subscribers, the shorter the time and vice versa.

Change Mode Offline

Related features ZGO-02-01-003

2-779

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Precise Paging Configuration

Parameter Modifying
Version iBSCV6.20.710d

Parameter Modifying
Detail New

2.19 Location Area(GLocationArea)


2.19.1 Location Area ID
Full Name Location Area ID

Abbreviation GLocationArea

Managed Object Location Area

3GPP Name N/A

3GPP Reference N/A

Description Location Area ID

Instance None

Value Range and Step 1..65533, 65535

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-780

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Location Area

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.19.2 LAC
Full Name LAC

Abbreviation lac

Managed Object Location Area

3GPP Name N/A

3GPP Reference 3GPP TS44.018

Each GSM PLMN is divided into many location areas (LAs) in order to
determine the MS location, the location area code identifies the different
location areas. LAC comes under LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description The value is consistent with the data at CN side.

Instance LAC

Value Range and Step 1..65533, 65535

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-781

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Location Area

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.19.3 IMSI attach/detach allowed


Full Name IMSI attach/detach allowed

Abbreviation imsiAdAllowed

Managed Object Location Area

3GPP Name ATT

3GPP Reference 3GPP TS44.018

IMSI attach/detach allowed determines whether cell allows IMSI


Attach/Detach procedure. IMSI detach occur when MS reports switch-off
or when the SIM card is taken out from the MS.
The network (normally VLR) marks Detach flag in subscriber
information table. Such procedure assists the network to prevent
unnecessary
paging broadcast message to MS. Accordingly, the IMSI Attach process
means that the MS reports entering the working status to the network
or the MS checks after the SIM card is re-inserted into the MS if the LAI
where the MS is located is consistent with the original one
saved. If yes, the IMSI Attach process will be started; otherwise, the
location updating process will be started instead.
The network (normally VLR) marks Attach flag in subscriber information
table.
This parameter is included in Control channel information and is used
for RIL3_RR SYSTEM INFORMATION TYPE3 message.
Description This parameter of each cell in the same location area shall be identical.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

2-782

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 1

Default Value
Configuration Reason Consider network optimization

Configuration Rule and The default value is recommended.


Adjustment Suggestion This parameter of each cell in a same location area shall be identical.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Location Area

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.19.4 Periodical location updating timer


Full Name Periodical location updating timer

Abbreviation t3212

Managed Object Location Area

3GPP Name T3212

3GPP Reference 3GPP TS 44.018

Location update results from two major causes in GSM system. One is
when MS changes from old LAC to new LAC and the second is when
the network notifies MS for periodic location update.
Network controls the location time interval and depends upon T3212
timer. Network broadcasts to all MSs in the cell by RIL3_RR SYSTEM
INFORMATION TYPE3 message. T3212 timer is one of the system
control parameters.
The setting of this parameter will affect the overall service performance
and utilization rate of radio resources of the network. For the area with
higher traffic, the period could be bigger (for example 16 or 20 hours,

Description even 25 hours); for the area with ordinary traffic, the value of T3212

2-783

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

could be smaller (for example 3 or 6 hours); for the area with extreme
overload traffic, it is recommended to set T3212 as 0.

Instance Cell

Value Range and Step 0..255

Unit 360s

Default Value 10

Default Value
Configuration Reason consultation with the MSC

This parameter affects the overall service


performance of the network and the utilization of the radio resource.
For the area with higher traffic, the period could be bigger (for
example 16 or 20 hours, even 25 hours); for the area with ordinary
traffic, the value of T3212 could be smaller (for example 3 or 6 hours);
for the area with extreme overload traffic, it is recommended to set
Configuration Rule and T3212 as 0. The default value can be set to 10 (1 hour). Configuration
Adjustment Suggestion of this parameter should be same within the same location area, while
the value that VLR periodically updates the timer should be greater
than this parameter. This parameter is set to 10 by default. It should
be smaller than the implicit power-off duration of CN. The value of
T3212 under the same LAC should be consistent. In case the coverage
is poor, set this parameter to a small value, which has assistance
for increasing paging success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Location Area

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-784

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.20 Routing Area(GRoutingArea)


2.20.1 Routing Area ID
Full Name Routing Area ID

Abbreviation GRoutingArea

Managed Object Routing Area

3GPP Name N/A

3GPP Reference N/A

Description Routing Area ID

Instance None

Value Range and Step 0..255

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Routing Area

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.20.2 RAC
Full Name RAC

2-785

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation rac

Managed Object Routing Area

3GPP Name None

3GPP Reference N/A

RAC is a composition part of Routing Area Identity (RAI). RAI defines the
GPRS serving cell identification. GPRS system divides the location area
(LAs) to several routing areas (RAs) using RAI (MCC+MNC+LAC+RAC).
Routing Area (RA) distribution, similar to GSM system, uses the location
area to manage a group of cells. MS initiates Routing area update
procedure in cell reselection mode if new RAI differs from old RAI during
cell reselection.
SGSN knows the routing area information of the MS in the standby
status. Then, when the network has packet data or circuit data to
transmit, it will page the MS in that routing area. RAI cannot span more
than one SGSN.
Description This parameter is consistent with the data at CN side.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value NA

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and One RAI cannot be configured in several SGSNs.


Adjustment Suggestion The value is consistent with the data at the CN side.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 3

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Location


OMC Access Path
Information Configuration->Routing Area

Parameter Modifying
Version N/A

2-786

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.21 AMR Configuration(GCellAmr)


2.21.1 AMR Configuration ID
Full Name AMR Configuration ID

Abbreviation GCellAmr

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

Description AMR Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-787

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.2 Support AMR Codec


Full Name Support AMR Codec

Abbreviation amrSupport

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates whether AMR Codec is supported.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value The AMR function is restricted by LICENSE, so the default setting is
Configuration Reason Not Supported.

Configuration Rule and


Adjustment Suggestion Configure this parameter in accordance with the LICENSE.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.3 Use cell AMR parameter


Full Name Use cell AMR parameter

Abbreviation useCellAmrParam

2-788

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the AMR parameters of the cell are
enabled.
If no, the AMR parameters set in the BSC are preferred.
Description If yes, the AMR parameters of the cell are preferred.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value In most cases, the AMR parameters can be set


Configuration Reason in a unified manner in the BSC for convenient configuration.

Configuration Rule and Enable this switch if you want to set the AMR
Adjustment Suggestion parameter depending on the characteristics of the cell.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.4 AMR full Active Codec Set(4.75kbps)


Full Name AMR full Active Codec Set(4.75kbps)

Abbreviation amrFullAcs1

Managed Object AMR Configuration

2-789

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the


Description 4.75kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.5 AMR full Active Codec Set(5.15kbps)


Full Name AMR full Active Codec Set(5.15kbps)

Abbreviation amrFullAcs2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-790

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies whether the ACS of AMR FR contains the 5.15
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.6 AMR full Active Codec Set(5.9kbps)


Full Name AMR full Active Codec Set(5.9kbps)

Abbreviation amrFullAcs3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 5.9
Description kbps codec mode.

Instance Cell

2-791

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.7 AMR full Active Codec Set(6.7kbps)


Full Name AMR full Active Codec Set(6.7kbps)

Abbreviation amrFullAcs4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 6.7
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

2-792

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.8 AMR full Active Codec Set(7.4kbps)


Full Name AMR full Active Codec Set(7.4kbps)

Abbreviation amrFullAcs5

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 7.4
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

2-793

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.9 AMR full Active Codec Set(7.95kbps)


Full Name AMR full Active Codec Set(7.95kbps)

Abbreviation amrFullAcs6

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 7.95
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

2-794

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.10 AMR full Active Codec Set(10.2kbps)


Full Name AMR full Active Codec Set(10.2kbps)

Abbreviation amrFullAcs7

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 10.2
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-795

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.11 AMR full Active Codec Set(12.2kbps)


Full Name AMR full Active Codec Set(12.2kbps)

Abbreviation amrFullAcs8

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR FR contains the 12.2
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

2-796

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.12 AMR Half Active Codec Set(4.75kbps)


Full Name AMR Half Active Codec Set(4.75kbps)

Abbreviation amrHalfAcs1

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 4.75
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-797

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.13 AMR Half Active Codec Set(5.15kbps)


Full Name AMR Half Active Codec Set(5.15kbps)

Abbreviation amrHalfAcs2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 5.15
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-798

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.14 AMR Half Active Codec Set(5.9kbps)


Full Name AMR Half Active Codec Set(5.9kbps)

Abbreviation amrHalfAcs3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 5.9
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

2-799

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.15 AMR Half Active Codec Set(6.7kbps)


Full Name AMR Half Active Codec Set(6.7kbps)

Abbreviation amrHalfAcs4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 6.7
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

2-800

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.21.16 AMR Half Active Codec Set(7.4kbps)


Full Name AMR Half Active Codec Set(7.4kbps)

Abbreviation amrHalfAcs5

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies whether the ACS of AMR HR contains the 7.4
Description kbps codec mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-801

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.17 AMR Half Active Codec Set(7.95kbps)


Full Name AMR Half Active Codec Set(7.95kbps)

Abbreviation amrHalfAcs6

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

Description AMR Half Active Codec Set(7.95kbps)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Using both high rate and low rate is widely applicable.

Generally, select both high rate and low rate. When the radio signals
Configuration Rule and
in a cell are comparatively good, select high rate only. When the radio
Adjustment Suggestion
signals in a cell are comparatively bad, select low rate only.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.18 Thresholds of AMR FR 1


Full Name Thresholds of AMR FR 1

Abbreviation amrFrThresholds1

2-802

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 4.75kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 13

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds2


amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

2-803

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.21.19 Thresholds of AMR FR 2


Full Name Thresholds of AMR FR 2

Abbreviation amrFrThresholds2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 5.15 kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 14

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-804

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.20 Thresholds of AMR FR 3


Full Name Thresholds of AMR FR 3

Abbreviation amrFrThresholds3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 5.9kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 15

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4

2-805

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.21 Thresholds of AMR FR 4


Full Name Thresholds of AMR FR 4

Abbreviation amrFrThresholds4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 6.7kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 17

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-806

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.22 Thresholds of AMR FR 5


Full Name Thresholds of AMR FR 5

Abbreviation amrFrThresholds5

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 7.4kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 18

2-807

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.23 Thresholds of AMR FR 6


Full Name Thresholds of AMR FR 6

Abbreviation amrFrThresholds6

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-808

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 7.95kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-809

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.24 Thresholds of AMR FR 7


Full Name Thresholds of AMR FR 7

Abbreviation amrFrThresholds7

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR FR codec
Description mode to 10.2kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 23

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-810

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.25 Thresholds of AMR HR 1


Full Name Thresholds of AMR HR 1

Abbreviation amrHrThresholds1

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 4.75kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 18

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds2


amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

2-811

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.26 Thresholds of AMR HR 2


Full Name Thresholds of AMR HR 2

Abbreviation amrHrThresholds2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 5.15kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-812

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrHrThresholds1


amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.27 Thresholds of AMR HR 3


Full Name Thresholds of AMR HR 3

Abbreviation amrHrThresholds3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 5.9kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 23

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

2-813

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.28 Thresholds of AMR HR 4


Full Name Thresholds of AMR HR 4

Abbreviation amrHrThresholds4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 6.7kbps.

Instance Cell

Value Range and Step 0..63

Unit N/A

2-814

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 26

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.29 Thresholds of AMR HR 5


Full Name Thresholds of AMR HR 5

Abbreviation amrHrThresholds5

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies the C/I threshold for reducing the AMR HR codec
Description mode to 7.4kbps.

2-815

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 30

Default Value The CIR when different AMR rates are at 1% FER, which is obtained
Configuration Reason by system simulation

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.30 Hysteresis of AMR FR 1


Full Name Hysteresis of AMR FR 1

Abbreviation amrFrHysteresis1

Managed Object AMR Configuration

3GPP Name N/A

2-816

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 4.75kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

2-817

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.21.31 Hysteresis of AMR FR 2


Full Name Hysteresis of AMR FR 2

Abbreviation amrFrHysteresis2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 5.15kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

2-818

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.32 Hysteresis of AMR FR 3


Full Name Hysteresis of AMR FR 3

Abbreviation amrFrHysteresis3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 5.9kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-819

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.33 Hysteresis of AMR FR 4


Full Name Hysteresis of AMR FR 4

Abbreviation amrFrHysteresis4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 6.7kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

2-820

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.34 Hysteresis of AMR FR 5


Full Name Hysteresis of AMR FR 5

Abbreviation amrFrHysteresis5

2-821

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 7.4kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis6
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

2-822

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.35 Hysteresis of AMR FR 6


Full Name Hysteresis of AMR FR 6

Abbreviation amrFrHysteresis6

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 7.95kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4

2-823

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

amrFrHysteresis5
amrFrHysteresis7

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.36 Hysteresis of AMR FR 7


Full Name Hysteresis of AMR FR 7

Abbreviation amrFrHysteresis7

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description mode from 10.2kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-824

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrFrThresholds1


amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.37 Hysteresis of AMR HR 1


Full Name Hysteresis of AMR HR 1

Abbreviation amrHrHysteresis1

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 4.75kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

2-825

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustment (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.38 Hysteresis of AMR HR 2


Full Name Hysteresis of AMR HR 2

Abbreviation amrHrHysteresis2

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

2-826

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 5.15kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustment (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-827

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.39 Hysteresis of AMR HR 3


Full Name Hysteresis of AMR HR 3

Abbreviation amrHrHysteresis3

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 5.9kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustment (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

2-828

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.40 Hysteresis of AMR HR 4


Full Name Hysteresis of AMR HR 4

Abbreviation amrHrHysteresis4

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 6.7kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustment (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5

Relationship N/A

Related Interfaces N/A

2-829

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.41 Hysteresis of AMR HR 5


Full Name Hysteresis of AMR HR 5

Abbreviation amrHrHysteresis5

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description mode from 7.4kbps.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

Determine whether the Hysteresis parameter value is appropriate by


Configuration Rule and observing the frequency of rate adjustment (for example, through
Adjustment Suggestion test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

2-830

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters amrHrThresholds1


amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.42 Enable AMR FR noise control


Full Name Enable AMR FR noise control

Abbreviation amrFrNscb

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter specifies whether the AMR noise suppression on the


MS is disabled for the AMRFR speech version. The noise suppression
function on the MS keeps the speech quality by controlling the
background noise.
No: Noise control can be enabled.
Description Yes: Noise control is disabled.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-831

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value Enabling noise suppression can eliminate noise and improve voice
Configuration Reason quality.

Configuration Rule and Generally, enable the noise suppression function. When speech voice is
Adjustment Suggestion degraded, pay attention to the parameter setting.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.43 AMR FR Initial codec mode


Full Name AMR FR Initial codec mode

Abbreviation amrFrIcm

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter indicates the initial speech codec mode of AMR FR


employs the mode specified by Startmode or the default initial codec
mode specified in protocol 45.009. The initial codec mode specified in
the protocol is described as follows:
1. When there is one codec mode, this mode is employed as the initial
mode.
2. When there are two or three codec modes, the lowest speed mode
is employed as the initial mode.
3. When there are four modes, the mode with the second lowest speed
Description is employed as the initial mode.

2-832

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

For the A interface using IP, this parameter is not used. Instead, the
system control parameter IpaAMRStartMode decides the initial codec
mode.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason Set the initial codec mode as required

Configuration Rule and If initial rate needs no special consideration, set this parameter to "Start
Adjustment Suggestion Coding Mode", meaning the default initial rate specified in the protocol.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.44 AMR FR Start mode


Full Name AMR FR Start mode

Abbreviation amrFrStartMode

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

2-833

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter decides the initial codec mode for the AMR FR speech
version. The value must not be larger than the number of codec modes
contained in the ACS. The parameter values are described as follows:
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest speed
3: the initial codec mode employs the one with the third lowest speed
Description 4: the initial codec mode employs the one with the forth lowest speed

Instance Cell

Value Range and Step 1..4

Unit N/A

Default Value 4

Default Value Using the lowest coding mode can ensure that comparatively good voice
Configuration Reason quality can be provided in bad radio condition.

Configuration Rule and


Adjustment Suggestion If the radio quality is good, use a higher initial rate.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrFullAcs1


amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-834

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.21.45 Enable AMR HR noise control


Full Name Enable AMR HR noise control

Abbreviation amrHrNscb

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter specifies whether the AMR noise suppression on the


MS is disabled for the AMRHR speech version. The noise suppression
function on the MS keeps the speech quality by controlling the
background noise.
No: Noise control can be enabled.
Description Yes: Noise control is disabled.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Enabling noise suppression can eliminate noise and improve voice
Configuration Reason quality.

Configuration Rule and Generally, enable the noise suppression function. When speech voice is
Adjustment Suggestion degraded, pay attention to the parameter setting.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-835

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.46 AMR HR Initial codec mode


Full Name AMR HR Initial codec mode

Abbreviation amrHrIcm

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 45.009

This parameter indicates the initial speech codec mode of AMR HR


employs the mode specified by Startmode or the default initial codec
mode specified in protocol 45.009. The initial codec mode specified in
the protocol is described as follows:
1. When there is one codec mode, this mode is employed as the initial
mode.
2. When there are two or three codec modes, the lowest speed mode
is employed as the initial mode.
3. When there are four modes, the mode with the second lowest speed
is employed as the initial mode.
For the A interface using IP, this parameter is not used. Instead, the
system control parameter IpaAMRStartMode decides the initial codec
Description mode.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Set the initial codec mode as required

Configuration Rule and If initial rate needs no special consideration, set this parameter to "Start
Adjustment Suggestion Coding Mode", meaning the default initial rate specified in the protocol.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHrStartMode

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

2-836

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.47 AMR HR Start mode


Full Name AMR HR Start mode

Abbreviation amrHrStartMode

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter decides the initial codec mode for the AMR HR speech
version. The value must not be larger than the number of codec modes
contained in the ACS. The parameter values are described as follows:
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest speed
3: the initial codec mode employs the one with the third lowest speed
Description 4: the initial codec mode employs the one with the forth lowest speed

Instance Cell

Value Range and Step 1..4

Unit N/A

Default Value 3

Default Value Using the lowest coding mode can ensure that comparatively good voice
Configuration Reason quality can be provided in bad radio condition.

Configuration Rule and If the radio quality is good, use a higher initial rate to improve the voice
Adjustment Suggestion quality.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters amrHalfAcs1


amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
amrHrIcm

Relationship N/A

Related Interfaces N/A

2-837

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.48 AMR codec adjust mode


Full Name AMR codec adjust mode

Abbreviation amrAdjMode

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

The AMR rate regulation mode falls into two types: AMR quick regulation
where the BTS perform self-control, and quick regulation mode where the
Description BTS use the default time (960ms).

Instance Cell

0: AMR rapid speed mode


Value Range and Step 1: Interval of configuration's adjacent

Unit N/A

Default Value 0

Default Value
Configuration Reason Due to the practical application of the net

Generally, the default value is recommended.


Configuration Rule and
The rate adjustment is determined by the BTS. The interval of 960
Adjustment Suggestion
ms is appropriate for rate adjustment.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-838

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.49 AMR codec adjust interval


Full Name AMR codec adjust interval

Abbreviation amrAdjInterval

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the interval for AMR codec adjustment. This
parameter is valid when the AmrAdjMode parameter is set to "Interval-
based adjustment mode". Refer to the description of AmrAdjMode for
Description more information.

Instance Cell

Value Range and Step 1..50

Unit 480ms

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

The default value is recommended. Generally,


the AMR rapid rate adjustment mode is adopted in the network, and
the BTS can properly control the adjustment. If operator intervene
Configuration Rule and
is needed for rate adjustment, select the interval-based rate adjustment
Adjustment Suggestion
mode and set the value of this parameter. The larger the parameter
value is, the longer the adjustment interval is, that is, the slower
a rate adjustment is.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)

Related Parameters AmrAdjMode

2-839

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is valid only when the AmrAdjMode


Relationship
parameter is set to "Interval-based rate adjustment".

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.50 BSS radio link timer's max value for AMR FR


Full Name BSS radio link timer's max value for AMR FR

Abbreviation bsRadioLkTmOutAMRFR

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value (initial value) of S that


is the counter for AMR-FRvoice service failure. GSM rule specifies
that BTS needs a counter S, which is rendered a value recorded in
parameter BsRadioLkTmout when the call starts. Once BTS fails to
decode a correct SACCH message when it should, S will decrease by
1. Once BTS decodes a correct SACCH message, S is increased by 2.
The value of S cannot exceed BsRadioLkTmout.
When S reaches 0, BTS will report radio link fault. This counter is
Description designed for AMR-FR voice service.

Instance Cell

2-840

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit SACCH mf

Default Value 15

Default Value This parameter can have a big value, so there


Configuration Reason will be plenty of time to restore the normal quality call.

When this parameter has a big value, there


Configuration Rule and will be plenty of time to restore the normal quality call. When the
Adjustment Suggestion parameter has a small value, it is difficult to restore the normal
quality call and the radio resources will be released.

Change Mode Offline

Related features ZGO-04-02-007 AMR Radio Link Timers_FG_20101030

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-841

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.51 BSS radio link timer's max value for AMR HR


Full Name BSS radio link timer's max value for AMR HR

Abbreviation bsRadioLkTmOutAMRHR

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value (initial value) of S that


is the counter for AMR-HRvoice service failure. GSM rule specifies
that BTS needs a counter S, which is rendered a value recorded in
parameter BsRadioLkTmout when the call starts. Once BTS fails to
decode a correct SACCH message when it should, S will decrease by
1. Once BTS decodes a correct SACCH message, S is increased by 2.
The value of S cannot exceed BsRadioLkTmout.
When S reaches 0, BTS will report radio link fault. This counter is
Description designed for AMR-HR voice service.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit SACCH mf

Default Value 15

Default Value This parameter can have a big value, so there


Configuration Reason will be plenty of time to restore the normal quality call.

When this parameter has a big value, there


Configuration Rule and will be plenty of time to restore the normal quality call. When the
Adjustment Suggestion parameter has a small value, it is difficult to restore the normal
quality call and the radio resources will be released.

2-842

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-007 AMR Radio Link Timers_FG_20101030

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.21.52
MAX value of MS Radio link
timeout for AMR FR
MAX value of MS Radio link
Full Name timeout for AMR FR

Abbreviation msRadioLkTmOutAMRFR

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value of the MS-side radio link
counter S that is used for AMR FR. The parameter value is transmitted
on the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description or released.

Instance Cell

2-843

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-844

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.21.53
MAX value of MS Radio link
timeout for AMR HR
MAX value of MS Radio link
Full Name timeout for AMR HR

Abbreviation msRadioLkTmOutAMRHR

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value of the MS-side radio link
counter S that is used for AMR HR. The parameter value is transmitted
on the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description or released.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

2-845

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.54 Support AMR-WB Codec


Full Name Support AMR-WB Codec

Abbreviation SUPPORTAMRWB

Managed Object AMR Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the AMR-WB is supported in a cell. It


Description is configured for individual cells.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

2-846

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to the on-site environment.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.55 Hysteresis of AMRWFS 1


Full Name Hysteresis of AMRWFS 1

Abbreviation amrWfsHysteresis1

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..15

Unit N/A

2-847

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWf-


sThresholds4

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.56 Hysteresis of AMRWFS 2


Full Name Hysteresis of AMRWFS 2

Abbreviation amrWfsHysteresis2

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

2-848

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWf-


sThresholds4

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-849

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.57 Hysteresis of AMRWFS 3


Full Name Hysteresis of AMRWFS 3

Abbreviation amrWfsHysteresis3

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWf-


sThresholds4

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

2-850

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.58 Hysteresis of AMRWFS 4


Full Name Hysteresis of AMRWFS 4

Abbreviation amrWfsHysteresis4

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description sThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWf-


sThresholds4

2-851

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The hysteresis for changing AMRWFS mode includes four factors,


which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
Relationship The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.59 Hysteresis of AMROWFS 1


Full Name Hysteresis of AMROWFS 1

Abbreviation amrOwfsHysteresis1

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

2-852

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwfsThresholds1\amrOwfsThresholds2

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.60 Hysteresis of AMROWFS 2


Full Name Hysteresis of AMROWFS 2

Abbreviation amrOwfsHysteresis2

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance Cell

2-853

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwhsThresholds1amrOwhsThresholds2

The hysteresis for changing AMROWFS mode includes two factors,


which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.61 Hysteresis of AMROWHS 1


Full Name Hysteresis of AMROWHS 1

Abbreviation amrOwhsHysteresis1

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

2-854

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwhsThresholds1amrOwhsThresholds2

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-855

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.62 Hysteresis of AMROWHS 2


Full Name Hysteresis of AMROWHS 2

Abbreviation amrOwhsHysteresis2

Managed Object AMR Configuration

3GPP Name hysteresis

3GPP Reference 3GPP TS 45.009

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 3

The default value keeps proper differences


Default Value
among the thresholds of rate increases and decreases, avoiding frequent
Configuration Reason
adjustments and ensuring timely adjustments.

By checking the frequency of rate adjustments,


Configuration Rule and you can decide whether this parameter is set properly. When the rate
Adjustment Suggestion is adjusted too frequently, you can set the parameter to a higher
value.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWf-


sThresholds4

The hysteresis for changing AMROWHS mode includes two factors,


which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
Relationship
The two parameter values must meet the following condition:
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-856

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.63 Thresholds for AMRWFS 1


Full Name Thresholds for AMRWFS 1

Abbreviation amrWfsThresholds1

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four threshold values during AMRWFS mode change:


amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3, and
amrWfsThresholds4. The following condition must be met:
amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4amrWfsThresholds1amrWfsHysteresis1am-
rWfsThresholds2amrWfsHysteresis2amrWfsThresholds3
Description amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWf-


sHysteresis4

2-857

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.64 Thresholds for AMRWFS 2


Full Name Thresholds for AMRWFS 2

Abbreviation amrWfsThresholds2

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four threshold values during AMRWFS mode change:


amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3,
amrWfsThresholds4. The following condition must be met:
amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4amrWfsThresholds1amrWfsHysteresis1am-
rWfsThresholds2amrWfsHysteresis2amrWfsThresholds3
Description amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

2-858

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWf-


sHysteresis4

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.65 Thresholds for AMRWFS 3


Full Name Thresholds for AMRWFS 3

Abbreviation amrWfsThresholds3

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

2-859

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

There are four threshold values during AMRWFS mode change:


amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3,
amrWfsThresholds4. The following condition must be met:
amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4amrWfsThresholds1amrWfsHysteresis1am-
rWfsThresholds2amrWfsHysteresis2amrWfsThresholds3
Description amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWf-


sHysteresis4

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-860

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.21.66 Thresholds for AMRWFS 4


Full Name Thresholds for AMRWFS 4

Abbreviation amrWfsThresholds4

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are four threshold values during AMRWFS mode change:


amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3,
amrWfsThresholds4. The following condition must be met:
amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4amrWfsThresholds1amrWfsHysteresis1am-
rWfsThresholds2amrWfsHysteresis2amrWfsThresholds3
Description amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWf-


sHysteresis4

There are four thresholds for changing AMRWFS mode, which


are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
Relationship (1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3am-
rWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
sThresholds4amrWfsHysteresis4

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-861

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.67 Thresholds for AMROWFS 1


Full Name Thresholds for AMROWFS 1

Abbreviation amrOwfsThresholds1

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwfsHysteresis1\amrOwfsHysteresis2

2-862

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.68 Thresholds for AMROWFS 2


Full Name Thresholds for AMROWFS 2

Abbreviation amrOwfsThresholds2

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
Description amrOwfsHysteresis2

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

2-863

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWf-


sHysteresis4

There are two thresholds for changing AMROWFS mode, which


are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
amrOwfsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.69 Thresholds for AMROWHS 1


Full Name Thresholds for AMROWHS 1

Abbreviation amrOwhsThresholds1

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

2-864

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwhsHysteresis1\amrOwhsHysteresis2

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.70 Thresholds for AMROWHS 2


Full Name Thresholds for AMROWHS 2

Abbreviation amrOwhsThresholds2

Managed Object AMR Configuration

3GPP Name threshold

3GPP Reference 3GPP TS 45.009

2-865

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description amrOwhsHysteresis2

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 6

Default Value The default value consists of the carrier-to-interference


Configuration Reason ratios required in different AMR rates when the FER is 1%.

Configuration Rule and Generally, you do not have to adjust the setting
Adjustment Suggestion of this parameter unless the FER measured by the BTS exceeds 1%.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters amrOwhsHysteresis1\amrOwhsHysteresis2

There are two thresholds for changing AMROWHS mode, which


are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
Relationship The two parameter values must meet the following two conditions:
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
amrOwhsHysteresis2

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-866

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.21.71
MAX value of MS Radio link
timeout for AMR WFS
MAX value of MS Radio link
Full Name timeout for AMR WFS

Abbreviation msRadioLkOutAmrWfs

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value of the MS-side radio link
counter S used for AMR WFS. The parameter value is transmitted on
the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description or released.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

2-867

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.72
MAX value of MS Radio link
timeout for AMR-WB OWFS
MAX value of MS Radio link
Full Name timeout for AMR-WB OWFS

Abbreviation msRadioLkOutAmrOwfs

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

2-868

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates the maximum value of the MS-side radio link
counter S that is used for AMR-WB OWFS. The parameter value is
transmitted on the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description or released.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

2-869

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.73
MAX value of MS Radio link
timeout for AMR-WB OWHS
MAX value of MS Radio link
Full Name timeout for AMR-WB OWHS

Abbreviation msRadioLkOutAmrOwhr

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value of the MS-side radio link
counter S that is used for AMR-WB OWHS. The parameter value is
transmitted on the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description or released.

Instance Cell

2-870

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value
Configuration Reason MS calls to increase error tolerance for the wireless link

The parameter is correlated with the call drop


rate. The call drop rate will be lowered if the parameter is set higher.
Configuration Rule and
To improve the call drop rate index, this parameter can be set higher,
Adjustment Suggestion
But is it not good for the user perception and system resources utility
rate.

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-871

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.21.74 BSS radio link timers max value for FR-AMR-WB


Full Name BSS radio link timers max value for FR-AMR-WB

Abbreviation bsRadioLkOutAMRWFS

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value (initial value) of the BSS-
side radio link counter S that is used for failure detection in the case of
FR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
is required in the BTS. This counter is assigned an initial value (the value
of BsRadioLkTmout) before a call starts. When the BTS fails to decode
a received SACCH message correctly, S is decreased by one. When the
BTS receives a SACCH message correctly, S is increased by two. The S
value must be less than the BsRadioLkTmout value. When S=0, the BTS
Description reports a radio link failure.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value This parameter can have a big value, so there


Configuration Reason will be plenty of time to restore the normal quality call.

When this parameter has a big value, there


Configuration Rule and will be plenty of time to restore the normal quality call. When the
Adjustment Suggestion parameter has a small value, it is difficult to restore the normal
quality call and the radio resources will be released.

2-872

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.21.75 BSS radio link timer's max value for OFR-AMR-WB


Full Name BSS radio link timer's max value for OFR-AMR-WB

Abbreviation bsRadioLkOutAmrOwfs

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value (initial value) of the BSS-
side radio link counter S that is used for failure detection in the case of
OFR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
is required in the BTS. This counter is assigned an initial value (the value
of BsRadioLkTmout) before a call starts. When the BTS fails to decode
a received SACCH message correctly, S is decreased by one. When the
BTS receives a SACCH message correctly, S is increased by two. The S
value must be less than the BsRadioLkTmout value. When S=0, the BTS
Description reports a radio link failure.

Instance Cell

2-873

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value This parameter can have a big value, so there


Configuration Reason will be plenty of time to restore the normal quality call.

When this parameter has a big value, there


Configuration Rule and will be plenty of time to restore the normal quality call. When the
Adjustment Suggestion parameter has a small value, it is difficult to restore the normal
quality call and the radio resources will be released.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-874

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.21.76 BSS radio link timer's max value for AMR OWHR
Full Name BSS radio link timer's max value for AMR OWHR

Abbreviation bsRadioLkOutAmrOwhr

Managed Object AMR Configuration

3GPP Name RADIO_LINK_TIMEOUT

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum value (initial value) of the BSS-
side radio link counter S that is used for failure detection in the case of
OHR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
is required in the BTS. This counter is assigned an initial value (the value
of BsRadioLkTmout) before a call starts. When the BTS fails to decode
a received SACCH message correctly, S is decreased by one. When the
BTS receives a SACCH message correctly, S is increased by two. The S
value must be less than the BsRadioLkTmout value. When S=0, the BTS
Description reports a radio link failure.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
Value Range and Step 15: 64

Unit N/A

Default Value 15

Default Value This parameter can have a big value, so there


Configuration Reason will be plenty of time to restore the normal quality call.

When this parameter has a big value, there


Configuration Rule and will be plenty of time to restore the normal quality call. When the
Adjustment Suggestion parameter has a small value, it is difficult to restore the normal
quality call and the radio resources will be released.

2-875

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-01-01-004 (AMR-WB)

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->AMR Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.22 Frequency Hopping System(GHoppingFrequency)


2.22.1 Frequency Hopping System ID
Full Name Frequency Hopping System ID

Abbreviation GHoppingFrequency

Managed Object Frequency Hopping System

3GPP Name N/A

3GPP Reference N/A

Description Frequency Hopping System ID

Instance None

Value Range and Step None

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

2-876

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Frequency Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.22.2 FhsID
Full Name FhsID

Abbreviation fhsId

Managed Object Frequency Hopping System

3GPP Name N/A

3GPP Reference N/A

Description This parameter is an identification of frequency hopping system.

Instance Cell

Value Range and Step 1..254

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces Um

2-877

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Frequency Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.22.3 Hopping sequence No.


Full Name Hopping sequence No.

Abbreviation HSN

Managed Object Frequency Hopping System

3GPP Name hopping sequence number

3GPP Reference 3GPP TS 44.018

According to GSM 05.02 Frequency Hoping Algorithm, MAI is a function


of TDMA Frame number (FN), Hoping Sequence Number (HSN) and
Mobile Allocation Index Offset (MAIO). HSN determines the operation
track of frequencies during the frequency hopping process.
Using different HSN for cells having same MA can avoid frequency
utilization conflict between adjacent cells during the frequency hopping
process.
Different timeslots can share the same group of MA and corresponding
HSN. When HSN = 0, it is a special frequency hopping (i.e. circular
frequency hopping) HSN can be derived from BCC of the cell, because
cells using the same MA also have the same BCCH.
For example, if HSN [(BCC6) +1, .., (BCC6) +6], then each cell
may use any of the 6 HSNs. The remaining 0 and 49 ~ 63 are used
in other
Description special cases. If for simple, directly use 0 by default.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value NA

Default Value
Configuration Reason None

2-878

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning. HSN is not recommended to set to 0.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Frequency Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.22.4 MA Frequency List


Full Name MA Frequency List

Abbreviation MaArfcnList

Managed Object Frequency Hopping System

3GPP Name N/A

3GPP Reference N/A

This parameter provides a list of absolute RF channel number in a


frequency hopping group.It is a CA sub-set of the home cell. The related
information will be notified to MS when MS is notified of which channel
should be used.
Description User can click Add or Del to perform adding or deleting operation.

Instance Cell

Value Range and Step 0..1023

Unit N/A

Default Value NA

Default Value
Configuration Reason None

2-879

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Frequency Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.23 Baseband Hopping System(GHoppingBaseband)


2.23.1 Baseband Hopping System ID
Full Name Baseband Hopping System ID

Abbreviation GHoppingBaseband

Managed Object Baseband Hopping System

3GPP Name N/A

3GPP Reference N/A

Description Baseband Hopping System ID

Instance None

Value Range and Step 1..255

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

2-880

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Baseband Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.23.2 FhsID
Full Name FhsID

Abbreviation fhsId

Managed Object Baseband Hopping System

3GPP Name N/A

3GPP Reference N/A

Description This parameter is an identification of frequency hopping system.

Instance Cell

Value Range and Step 1..254

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

Related features ZGO-04-03-004 Baseband Frequency Hopping

2-881

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Baseband Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.23.3 Hopping sequence No.


Full Name Hopping sequence No.

Abbreviation HSN

Managed Object Baseband Hopping System

3GPP Name hopping sequence number

3GPP Reference 3GPP TS 44.018

According to GSM 05.02 Frequency Hoping Algorithm, MAI is a function


of TDMA Frame number (FN), Hoping Sequence Number (HSN) and
Mobile Allocation Index Offset (MAIO). HSN determines the operation
track of frequencies during the frequency hopping process.
Using different HSN for cells having same MA can avoid frequency
utilization conflict between adjacent cells during the frequency hopping
process.
Different timeslots can share the same group of MA and corresponding
HSN. When HSN = 0, it is a special frequency hopping (i.e. circular
frequency hopping) HSN can be derived from BCC of the cell, because
cells using the same MA also have the same BCCH.
For example, if HSN [(BCC6) +1, .., (BCC6) +6], then each cell
may use any of the 6 HSNs. The remaining 0 and 49 ~ 63 are used
in other
Description special cases. If for simple, directly use 0 by default.

Instance Cell

Value Range and Step 0..63

Unit N/A

2-882

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning. HSN is not recommended to set to 0.

Change Mode Offline

Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Baseband Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.23.4 MA Frequency List


Full Name MA Frequency List

Abbreviation MaArfcnList

Managed Object Baseband Hopping System

3GPP Name N/A

3GPP Reference N/A

This parameter provides a list of Absolute RF Channel Numbers (AR-


FCNs) that correspond to all frequencies in a hopping frequency group
of a cell. This list is a subset of the Cell Allocation (CA) table of the cell.
The BSC notifies MSs of available channels in the cell by sending this
Description parameter to the MSs.

Instance Cell

Value Range and Step 0..1023

Unit N/A

Default Value NA

2-883

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Baseband Hopping System

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24 Handover Control(GHandoverControl)


2.24.1 Handover Control ID
Full Name Handover Control ID

Abbreviation GHandoverControl

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

2-884

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.2 Uplink power level Sample count


Full Name Uplink power level Sample count

Abbreviation hoUlLevWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter is the window size (number of sample values) used to
calculate average value of uplink signal intensity.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

2-885

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.3 Uplink level Weight


Full Name Uplink level Weight

Abbreviation hoUlLevWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-886

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Speech data is unavailable for silent period during conversation. GSM


specifications recommend Discontinuous Transmission Mode (DTX) to
control optimal usage of network resources during such silent periods.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate. Therefore, BSC, when averaging
the measurement values, uses different weights for the two types of
measurement data.
This parameter determines the weight for the first type of measurement
data when averaging uplink signal strength for power control. Weight for
Description the second type of measurement data is set to 1 by default.

Instance Cell

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value In the non-DTX mode, the measurement data is


Configuration Reason accurate, so the weight is relatively high.

Configuration Rule and Generally, it is recommended not to modify


Adjustment Suggestion the weight.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

2-887

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.24.4 Downlink power level Sample count


Full Name Downlink power level Sample count

Abbreviation hoDlLevWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (i.e. the number of sample
values) used to calculate the average value of downlink signal intensity.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-888

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.5 Downlink level Weight


Full Name Downlink level Weight

Abbreviation hoDlLevWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM Specifications, discontinuous transmission (DTX)


refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
This parameter determines the weight for the first type of measurement
data when averaging downlink signal strength for power control. Weight
Description for the second type of measurement data is set to 1 by default.

Instance Cell

Value Range and Step 1..3

Unit N/A

Default Value 2

2-889

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value In the non-DTX mode, the measurement data is


Configuration Reason accurate, so the weight is relatively high.

Configuration Rule and Generally, it is recommended not to modify


Adjustment Suggestion the weight.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.6 Uplink quality Sample count


Full Name Uplink quality Sample count

Abbreviation hoUlQualWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of uplink signal quality.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

Unit N/A

2-890

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 3

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.7 Uplink quality Weight


Full Name Uplink quality Weight

Abbreviation hoUlQualWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-891

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM Specifications, discontinuous transmission (DTX)


refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
This parameter determines the weight for the first type of measurement
data when averaging uplink signal quality for power control. Weight for
Description the second type of measurement data is set to 1 by default.

Instance Cell

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value In the non-DTX mode, the measurement data is


Configuration Reason accurate, so the weight is relatively high.

Configuration Rule and Generally, it is recommended not to modify


Adjustment Suggestion the weight.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

2-892

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.24.8 Downlink quality Sample count


Full Name Downlink quality Sample count

Abbreviation hoDlQualWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (i.e. the number of sample
values) used to calculate the average value of downlink signal quality.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-893

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.9 Downlink quality Weight


Full Name Downlink quality Weight

Abbreviation hoDlQualWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM Specifications, discontinuous transmission (DTX)


refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
This parameter determines the weight for the first type of measurement
data when averaging downlink signal quality for power control. Weight
Description for the second type of measurement data is set to 1 by default.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

2-894

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value In the non-DTX mode, the measurement data is


Configuration Reason accurate, so the weight is relatively high.

Configuration Rule and Generally, it is recommended not to modify


Adjustment Suggestion the weight.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.10 Distance
Full Name Distance

Abbreviation distanceWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of distance (timing advance) between
MS and BTS.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

2-895

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 4

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.11 Neighboring cell


Full Name Neighboring cell

Abbreviation ncellWindow

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

2-896

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of signal intensity for adjacent cells.
Description The parameter is Used in TCH handover

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Number of samples should be enough for ensuring


Default Value
the preciseness of handover decision, and for initiating handover
Configuration Reason
as early as possible when the signal is poor during communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.12 Number of zero allowed in AV


Full Name Number of zero allowed in AV

2-897

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation zeroAllowed

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, MS can report to BSS the


measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell .
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description (NCellWindow - the count of 0s).

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 1

Default Value Occasional 0 is acceptable.Excessive occurrences


Configuration Reason of 0 indicate that the signals of this adjacent cell are too poor.

If the number of 0s allowed is adjusted as too small, the adjacent cell


with good signal maybe missed.
Configuration Rule and If the number of 0s allowed is adjusted as too large, handover to the
Adjustment Suggestion adjacent cell with poor signal maybe initiated.
It is recommended to set the value as small as possible, in order to
select the adjacent cell with good signal.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-898

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.13 MIN interval between inter-cell handover


Full Name MIN interval between inter-cell handover

Abbreviation hoMinInterval

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the inter-cell handover, but not common intra-cell or inter-cell
concentric handover. In addition, micro-cell has its own handover policy,
so this parameter is only effective for macro-cell layer and its above layer.
For macro-cell, the default value can be 5; for micro-cell, the default
Description value can only be 0.

Instance Cell

Value Range and Step 0..31

Unit s

Default Value 5

Default Value
Configuration Reason experience value

2-899

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Large value indicates a longer interval between two handovers, avoiding


Configuration Rule and frequent handover but causing delay.
Adjustment Suggestion Small value indicates a shorter interval between two handovers and
handover is initiated faster, causing frequent handover.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.14 Max time advance threshold between MS and BTS


Full Name Max time advance threshold between MS and BTS

Abbreviation distanceThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon re-


ceived average value of uplink and downlink signal strength. The decision
process is as follows: For the latest N average values of TA (distance),
if P of the N values rises above relevant threshold value, then perform
Description handover. The handover is due to MS being out of the cell service range.

Instance Cell

{parent.cellType==0}[0..63]
{parent.cellType==1}[0..63]
{parent.cellType==2}[0..63]
{parent.cellType==3}[0..63]
Value Range and Step {parent.cellType==4}[0..219]

2-900

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

{parent.cellType==0}63,
{parent.cellType==1}63,
{parent.cellType==2}63,
{parent.cellType==3}63,
Default Value {parent.cellType==4}219

Default Value
Configuration Reason empirical value

Configuration Rule and Generally, the value is set as the time of


Adjustment Suggestion receiving 60 measurement reports.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.15 Uplink receive level Threshold


Full Name Uplink receive level Threshold

Abbreviation hoUlLevThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-901

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal strength, if P of the N values fall below relevant threshold value,
perform handover to improve the uplink signal strength.
The HoUlLevThs parameter defines the related threhold value. The
HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value. Usually the value of "HoUlLevThs"
shall be less than the threshold for uplink power control. That is, perform
Description power control first. If power control does not work, perform handover.

Instance Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
Value Range and Step
32:-79~-78

2-902

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

Default Value 7

Default Value Usually, -95 dbm is considered as the demarcation


Configuration Reason point between the good uplink level and poor uplink level.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

2-903

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Usually the value of "HoUlLevThs" should be


less than the threshold for uplink power control (increase). That
Relationship
is, perform power control first. If power control does not work, perform
handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.16 Downlink receive level Threshold


Full Name Downlink receive level Threshold

Abbreviation hoDlLevThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

The handover decision can be made after a series of average values are
obtained. The downlink receiving strength is one of the causes that will
bring about handover. The decision process is as follows: if the values of
P out of N number of recent downlink signal strength are lower than the re-
lated threshold, handover should be performed. And the cause is that the
downlink signal strength is too weak. Parameter HoDlLevThs defines
the related threshold, parameter HoDlLevN defines the related N value,
and parameter HoDlLevP defines the related P value. HoDlLevThs de-
fines the threshold, which is 15 by default (-96 dBm to -95 dBm). The
parameter value must be 3 dB greater than the minimum electricity level
Description (RxLevAccessMin).

Instance Cell

2-904

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
Value Range and Step
43:-68~-67

2-905

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

Default Value 15

Default Value Usually, -95 dbm is considered as the demarcation


Configuration Reason point between the good uplink level and poor uplink level.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Usually the value of "HoDlLevThs" shall be less than the threshold for
Relationship downlink power control (increase). That is, perform power control first. If
power control does not work, perform handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-906

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.17 Uplink receive quality Threshold


Full Name Uplink receive quality Threshold

Abbreviation hoUlQualThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal quality, if P of the N values rise above relevant threshold value,
perform handover to improve the uplink signal quality. The HoUlQualThs
parameter defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 8..70

Unit N/A

Default Value 49

Default Value Generally, the quality is considered as poor


Configuration Reason when its level is above 49.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-907

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.18 Downlink receive quality Threshold


Full Name Downlink receive quality Threshold

Abbreviation hoDlQualThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter specifies a downlink receive quality threshold.


As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive
quality is one of the handover reasons. If P (HoDlQualP) of the latest
N (HoDlQualN) average downlink receive quality values are greater
than this threshold (HoDlQualThs), a handover decision is made due
to poor downlink receive quality.
The downlink receive quality threshold (HoDlQualThs) must be greater
than the threshold for downlink power control (increase), which is
specified by the parameter PcDlInclQualThs in the R_POC table. When
the downlink receive quality is poor, the BSC carries out a power control
Description first. The handover decision is made only when the power control fails.

Instance Cell

Value Range and Step 8..70

Unit N/A

Default Value 49

Default Value Generally, the quality is considered as poor


Configuration Reason when its level is above 49.

2-908

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.19 Uplink receive level of intra-ho Threshold


Full Name Uplink receive level of intra-ho Threshold

Abbreviation intraHoUlLevThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter specifies an uplink receive level threshold.


As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The uplink receive level
is one of the handover reasons. If P (IntraHoUlLevP) of the latest N
(IntraHoUlLevN) average uplink receive level values are greater than
this threshold (IntraHoUlLevThs), an intra-cell handover decision is
made due to serious uplink (co-frequency) interference.
The uplink receive level threshold (IntraHoUlLevThs) must be greater
Description than the threshold for uplink power control (decrease).

Instance Cell

2-909

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
Value Range and Step
43:-68~-67

2-910

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

Default Value 35

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-911

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.20 Downlink receive level of intra-ho Threshold


Full Name Downlink receive level of intra-ho Threshold

Abbreviation intraHoDlLevThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter specifies a downlink receive level threshold.


As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive level
is one of the handover reasons. If P (IntraHoDlLevP) of the latest N
(IntraHoDlLevN) average downlink receive level values are greater than
this threshold (IntraHoDlLevThs), an intra-cell handover decision is
made due to serious downlink (co-frequency) interference.
The downlink receive level threshold (IntraHoDlLevThs) must be equal
Description to or less than the threshold for downlink power control (decrease).

Instance Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
Value Range and Step
18:-93~-92

2-912

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

2-913

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit dBm

Default Value 40

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.21 Uplink receive level Value P


Full Name Uplink receive level Value P

Abbreviation hoUlLevP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-914

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal strength, if P of the N values fall below relevant threshold value,
perform handover to improve the uplink signal strength.
The HoUlLevThs parameter defines the related threhold value. The
HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value. Usually the value of "HoUlLevThs"
shall be less than the threshold for uplink power control. That is, perform
Description power control first. If power control does not work, perform handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoUlLevP<=HoUlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-915

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.22 Uplink receive level Value N


Full Name Uplink receive level Value N

Abbreviation hoUlLevN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal strength, if P of the N values fall below relevant threshold value,
perform handover to improve the uplink signal strength.
The HoUlLevThs parameter defines the related threhold value. The
HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value. Usually the value of "HoUlLevThs"
shall be less than the threshold for uplink power control. That is, perform
Description power control first. If power control does not work, perform handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoUlLevP<=HoUlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-916

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.23 Downlink receive level Value P


Full Name Downlink receive level Value P

Abbreviation hoDlLevP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the value of P that is used for handover


decision due to downlink receive level.
The default value can be set to 15 (-96 dBm to -95 dBm). The parameter
value must be 3 dB greater than the minimum receive level for access
(RxLevAccessMin).
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive level is
one of the handover reasons. If P (HoDlLevP) of the latest N (HoDlLevN)
average downlink receive level values are less than the corresponding
threshold (HoDlLevThs), a handover decision is made due to too low
downlink signal level.
The downlink receive level threshold (HoDlLevThs) must be less than
the threshold for downlink power control (increase). When the downlink
receive level is too low, the BSC carries out a power control first. The
Description handover decision is made only when the power control fails.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

2-917

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.24 Downlink receive level Value N


Full Name Downlink receive level Value N

Abbreviation hoDlLevN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the value of N that is used for handover


decision due to downlink receive level.
The default value can be set to 15 (-96 dBm to -95 dBm). The parameter
value must be 3 dB greater than the minimum receive level for access
(RxLevAccessMin).
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive level is
one of the handover reasons. If P (HoDlLevP) of the latest N (HoDlLevN)
average downlink receive level values are less than the corresponding
threshold (HoDlLevThs), a handover decision is made due to too low
downlink signal level.
The downlink receive level threshold (HoDlLevThs) must be less than
the threshold for downlink power control (increase). When the downlink
receive level is too low, the BSC carries out a power control first. The
Description handover decision is made only when the power control fails.

Instance Cell

Value Range and Step 1..20

2-918

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.25 Uplink receive quality Value P


Full Name Uplink receive quality Value P

Abbreviation hoUlQualP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-919

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal quality, if P of the N values rise above relevant threshold value,
perform handover to improve the uplink signal quality. The HoUlQualThs
parameter defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoUlQualP<=HoUlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-920

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.26 Uplink receive quality Value N


Full Name Uplink receive quality Value N

Abbreviation hoUlQualN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal quality, if P of the N values rise above relevant threshold value,
perform handover to improve the uplink signal quality. The HoUlQualThs
parameter defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoUlQualP<=HoUlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-921

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.27 Downlink receive quality Value P


Full Name Downlink receive quality Value P

Abbreviation hoDlQualP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the value of P that is used for handover


decision due to downlink receive quality.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive quality
is one of the handover reasons. If P (HoDlQualP) of the latest N
(HoDlQualN) average downlink receive quality values are greater than
the corresponding threshold (HoDlQualThs), a handover decision is
made due to poor downlink signal quality.
The downlink receive quality threshold (HoDlQualThs) must be greater
than the threshold for downlink power control (increase), which is
specified by the parameter PcDlInclQualThs in the R_POC table. When
the downlink receive quality is poor, the BSC carries out a power control
Description first. The handover decision is made only when the power control fails.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

2-922

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.28 Downlink receive quality Value N


Full Name Downlink receive quality Value N

Abbreviation hoDlQualN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the value of N that is used for handover


decision due to downlink receive quality.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive quality
is one of the handover reasons. If P (HoDlQualP) of the latest N
(HoDlQualN) average downlink receive quality values are greater than
the corresponding threshold (HoDlQualThs), a handover decision is
made due to poor downlink signal quality.
The downlink receive quality threshold (HoDlQualThs) must be greater
than the threshold for downlink power control (increase), which is
specified by the parameter PcDlInclQualThs in the R_POC table. When
the downlink receive quality is poor, the BSC carries out a power control
Description first. The handover decision is made only when the power control fails.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

2-923

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.29 Uplink receive level of intra-ho Value P


Full Name Uplink receive level of intra-ho Value P

Abbreviation intraHoUlLevP

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter indicates the value of P that is used for intra-handover


decision due to uplink receive level. It is used for handover on TCH.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The uplink receive level
is one of the handover reasons. If P (IntraHoUlLevP) of the latest N
(IntraHoUlLevN) average uplink receive level values are greater than
the corresponding threshold (IntraHoUlLevThs), an intra-cell handover
decision is made due to serious uplink (co-frequency) interference.
The uplink receive level threshold (IntraHoUlLevThs) must be greater
Description than the threshold for uplink power control (decrease).

2-924

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason to 2, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of


Configuration Rule and handover decision, handover is too frequent.
Adjustment Suggestion If the value is too large, it is very difficult to satisfy the condition of
handover decision.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.30 Uplink receive level of intra-ho Value N


Full Name Uplink receive level of intra-ho Value N

Abbreviation intraHoUlLevN

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

2-925

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the value of N that is used for intra-handover


decision due to uplink receive level. It is used for handover on TCH.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The uplink receive level
is one of the handover reasons. If P (IntraHoUlLevP) of the latest N
(IntraHoUlLevN) average uplink receive level values are greater than
the corresponding threshold (IntraHoUlLevThs), an intra-cell handover
decision is made due to serious uplink (co-frequency) interference.
The uplink receive level threshold (IntraHoUlLevThs) must be greater
Description than the threshold for uplink power control (decrease).

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-926

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.31 Downlink receive level of intra-ho Value P


Full Name Downlink receive level of intra-ho Value P

Abbreviation intraHoDlLevP

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter specifies the value of P that is used for intra-cell


handover decision due to downlink receive level. It is used for handover
on TCH.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive level
is one of the handover reasons. If P (IntraHoDlLevP) of the latest N
(IntraHoDlLevN) average downlink receive level values are greater than
the corresponding threshold (IntraHoDlLevThs), an intra-cell handover
decision is made due to serious downlink (co-frequency) interference.
The downlink receive level threshold (IntraHoDlLevThs) must be equal
Description to or less than the threshold for downlink power control (decrease).

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason to 2, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of


Configuration Rule and handover decision, handover is too frequent.
Adjustment Suggestion If the value is too large, it is very difficult to satisfy the condition of
handover decision.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-927

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.32 Downlink receive level of intra-ho Value N


Full Name Downlink receive level of intra-ho Value N

Abbreviation intraHoDlLevN

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter specifies the value of N that is used for intra-cell


handover decision due to downlink receive level. It is used for handover
on TCH.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive level
is one of the handover reasons. If P (IntraHoDlLevP) of the latest N
(IntraHoDlLevN) average downlink receive level values are greater than
the corresponding threshold (IntraHoDlLevThs), an intra-cell handover
decision is made due to serious downlink (co-frequency) interference.
The downlink receive level threshold (IntraHoDlLevThs) must be equal
Description to or less than the threshold for downlink power control (decrease).

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

2-928

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.33 Distance handover Value P


Full Name Distance handover Value P

Abbreviation distanceP

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
then perform handover. The handover is due to MS being out of the cell
service range.
Parameter "DistanceN" defines the relevant N value, and parameter
Description "DistanceP" defines the relevant P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason to 2, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of


Configuration Rule and handover decision, handover is too frequent.
Adjustment Suggestion If the value is too large, it is very difficult to satisfy the condition of
handover decision.

Change Mode Offline

2-929

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship This parameter value should be smaller than or equal to DistanceN.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.34 Distance handover Value N


Full Name Distance handover Value N

Abbreviation distanceN

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
then perform handover. The handover is due to MS being out of the cell
service range.
Parameter "DistanceN" defines the relevant N value, and parameter
Description "DistanceP" defines the relevant P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

2-930

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship This parameter value should be larger than or equal to DistanceP.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.35 PBGT handover Value P


Full Name PBGT handover Value P

Abbreviation pbgtHoP

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter indicates the value P in PBGT handover. In PBGT han-


dover, if there are P values of PBGT in N PBGT satisfying the handover
Description determination condition, the PBGT handover conditions are satisfied.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

2-931

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.36 PBGT handover Value N


Full Name PBGT handover Value N

Abbreviation pbgtHoN

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter indicated the value N in PBGT handover. In PBGT han-


dover, if there are P values of PBGT in N PBGT satisfying the handover
Description determination condition, the PBGT handover conditions are satisfied.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

2-932

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.37 Allow intra-Cell handover attempt due to uplink


interference(High Speed)
Full Name Allow intra-Cell handover attempt due to uplink interference(High Speed)

Abbreviation hoControlIntfUl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow intra-cell TCH handover due


Description to uplink interference in the case of high speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-933

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason Due to the practical application of the net

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.38 Allow intra-Cell handover attempt due to downlink


interference(High Speed)
Allow intra-Cell handover attempt due to downlink interference(High
Full Name Speed)

Abbreviation hoControlIntfDl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow intra-cell TCH handover due


Description to downlink interference in the case of high speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-934

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason based on actual scene setting

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.39 Allow handover due to distance(High Speed)


Full Name Allow handover due to distance(High Speed)

Abbreviation hoControlDistance_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow handover due to distance(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-935

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Unless otherwise required, this switch should


Adjustment Suggestion not be enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.40 Allow standard PBGT handover(High Speed)


Full Name Allow standard PBGT handover(High Speed)

Abbreviation hoControlPbgt_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow standard PBGT handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

2-936

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.41 Allow automatic handover due to traffic(High Speed)


Full Name Allow automatic handover due to traffic(High Speed)

Abbreviation hoControlLoad_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow automatic TCH handover


Description based on traffic in the case of high speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Due to the practical application of the net.Suggest to close when it
Adjustment Suggestion is not used.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

2-937

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.42 Allow intra-cell handover in super TRX channel due to


downlink interference(High Speed)
Allow intra-cell handover in super TRX channel due to downlink interfer-
Full Name ence(High Speed)

Abbreviation hoControlIntfUlSTrx_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Allow intra-cell handover in super TRX channel due to downlink interfer-


Description ence(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-938

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.43 Allow intra-cell handover in super TRX channel due to


uplink interference(High Speed)
Allow intra-cell handover in super TRX channel due to uplink interfer-
Full Name ence(High Speed)

Abbreviation hoControlIntfDlSTrx_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Allow intra-cell handover in super TRX channel due to uplink interfer-


Description ence(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-939

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.44 Allow adjacent cells handover in super TRX channel due


to PBGT(High Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(High
Full Name Speed)

Abbreviation hoControlPbgtSTrx_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Allow adjacent cells handover in super TRX channel due to PBGT(High


Description Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-940

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.45 Allow rapid handover(High Speed)


Full Name Allow rapid handover(High Speed)

Abbreviation hoControlRapidLevUl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow rapid handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Uplink rapid attenuation handover is mainly


Configuration Rule and
applied to the rapid attenuation due to fast moving, strong directionality,
Adjustment Suggestion
and blocking.

Change Mode Offline

Related features ZGO-02-02-006 Rapid Level Drop Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-941

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.46 Allow Macro-Micro delay handover(High Speed)


Full Name Allow Macro-Micro delay handover(High Speed)

Abbreviation hoControlMacroMicro_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Macro-Micro delay handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

The macro-micro handover is to share traffic of the dual-layer or


multilayer network. Its main application scenario is the dual-frequency
Configuration Rule and
network in urban areas.
Adjustment Suggestion
If the macro-micro handover delay switch is enabled, congestion can be
eased but the coverage rate will be influenced.

Change Mode Offline

Related features ZGO-02-02-001 Handover Between Macro- and Micro-cells

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-942

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.47 Allow Micro-Micro delay handover(High Speed)


Full Name Allow Micro-Micro delay handover(High Speed)

Abbreviation hoControlMicroMicro_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Micro-Micro delay handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

2-943

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail New

2.24.48 Allow force transfer handover(High Speed)


Full Name Allow force transfer handover(High Speed)

Abbreviation hoControlForceMove_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow force transfer handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Generally, this switch is disabled.


Configuration Rule and In the case of 1800 M and 900 M network sharing site, it is better to
Adjustment Suggestion handover subscribers of 900 M network to 1800 M network.At this time,
you can transfer traffic by force.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2-944

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.49 Allow quality handover in uplink(High Speed)


Full Name Allow quality handover in uplink(High Speed)

Abbreviation hoControlQualUl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality handover in uplink(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.50 Allow level handover in uplink(High Speed)


Full Name Allow level handover in uplink(High Speed)

Abbreviation hoControlLevUl_H

2-945

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level handover in uplink(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.51 Allow quality handover in downlink(High Speed)


Full Name Allow quality handover in downlink(High Speed)

Abbreviation hoControlQualDl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-946

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Description Allow quality handover in downlink(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.52 Allow level handover in downlink(High Speed)


Full Name Allow level handover in downlink(High Speed)

Abbreviation hoControlLevDl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level handover in downlink(High Speed)

Instance Cell

2-947

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.53 Allow downlink rapid handover(High Speed)


Full Name Allow downlink rapid handover(High Speed)

Abbreviation hoControlRapidNLevDl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow downlink rapid handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-948

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason based on actual scene setting

This handover is mainly applied to the high-speed


scenario. This handover algorithm requires the areas along the railway
are covered by sites in link shape, and the adjacent cell has enough
Configuration Rule and
overlapped coverage areas.Handover decisions can be made faster
Adjustment Suggestion
through
configuring the adjacent cell with the direction attribute, so as
to enhance handover success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.54 Allow C/I limited handover(High Speed)


Full Name Allow C/I limited handover(High Speed)

Abbreviation hoControlCINCell_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow C/I limited handover(High Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

2-949

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Under the turnoff scenario, this function can


Configuration Rule and
be enabled for individual cells in order to prevent the tangential
Adjustment Suggestion
cross-coverage cell.Generally, this function should not be set.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.55 Allow downlink quality rapid handover(High Speed)


Full Name Allow downlink quality rapid handover(High Speed)

Abbreviation hoControlRadpidQDl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-950

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on TCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in high-speed scenarios. This algorithm uses
the raw measurement data of downlink quality, applies no window
for neighbor cells, and shares the N value used for other handover
decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value The default value is only enabled for the cell
Configuration Reason of poor downlink quality, rather than common cells.

Configuration Rule and Generally, This switch is enabled only when


Adjustment Suggestion downlink quality is poor and strong interference occurs to the cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2-951

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.56 Allow intra-Cell handover attempt due to uplink


interference(Middle Speed)
Allow intra-Cell handover attempt due to uplink interference(Middle
Full Name Speed)

Abbreviation hoControlIntfUl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to trigger the intra-cell TCH handover


Description because of uplink interference in the case of medium speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Due to the practical application of the net

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2-952

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.57 Allow intra-Cell handover attempt due to downlink


interference(Middle Speed)
Allow intra-Cell handover attempt due to downlink interference(Middle
Full Name Speed)

Abbreviation hoControlIntfDl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow the intra-cell TCH handover


Description due to uplink interference in the case of medium speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason based on actual scene setting

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2-953

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.58 Allow handover due to distance(Middle Speed)


Full Name Allow handover due to distance(Middle Speed)

Abbreviation hoControlDistance_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow handover due to distance(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Unless otherwise required, this switch should


Adjustment Suggestion not be enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.59 Allow standard PBGT handover(Middle Speed)


Full Name Allow standard PBGT handover(Middle Speed)

Abbreviation hoControlPbgt_M

2-954

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow standard PBGT handover(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.60 Allow automatic handover due to traffic(Middle Speed)


Full Name Allow automatic handover due to traffic(Middle Speed)

Abbreviation hoControlLoad_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-955

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to allow automatic TCH handover


Description based on traffic in the case of medium speed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Due to the practical application of the net.Suggest to close when it
Adjustment Suggestion is not used.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.61 Allow intra-cell handover in super TRX channel due to


downlink interference(Middle Speed)
Allow intra-cell handover in super TRX channel due to downlink interfer-
Full Name ence(Middle Speed)

Abbreviation hoControlIntfUlSTrx_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-956

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Allow intra-cell handover in super TRX channel due to downlink interfer-


Description ence(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.62 Allow intra-cell handover in super TRX channel due to


uplink interference(Middle Speed)
Allow intra-cell handover in super TRX channel due to uplink interfer-
Full Name ence(Middle Speed)

Abbreviation hoControlIntfDlSTrx_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-957

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Allow intra-cell handover in super TRX channel due to uplink interfer-


Description ence(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.63 Allow adjacent cells handover in super TRX channel due


to PBGT(Middle Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(Middle
Full Name Speed)

Abbreviation hoControlPbgtSTrx_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-958

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Allow adjacent cells handover in super TRX channel due to PBGT(Middle


Description Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.64 Allow rapid handover(Middle Speed)


Full Name Allow rapid handover(Middle Speed)

Abbreviation hoControlRapidLevUl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow rapid handover(Middle Speed)

Instance Cell

2-959

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Uplink rapid attenuation handover is mainly


Configuration Rule and
applied to the rapid attenuation due to fast moving, strong directionality,
Adjustment Suggestion
and blocking.

Change Mode Offline

Related features ZGO-02-02-006 Rapid Level Drop Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.65 Allow Macro-Micro delay handover(Middle Speed)


Full Name Allow Macro-Micro delay handover(Middle Speed)

Abbreviation hoControlMacroMicro_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Macro-Micro delay handover(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-960

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

The macro-micro handover is to share traffic of the dual-layer or


multilayer network. Its main application scenario is the dual-frequency
Configuration Rule and
network in urban areas.
Adjustment Suggestion
If the macro-micro handover delay switch is enabled, congestion can be
eased but the coverage rate will be influenced.

Change Mode Offline

Related features ZGO-02-02-001 Handover Between Macro- and Micro-cells

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.66 Allow Micro-Micro delay handover(Middle Speed)


Full Name Allow Micro-Micro delay handover(Middle Speed)

Abbreviation hoControlMicroMicro_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Micro-Micro delay handover(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-961

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.67 Allow force transfer handover(Middle Speed)


Full Name Allow force transfer handover(Middle Speed)

Abbreviation hoControlForceMove_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow force transfer handover(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-962

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Generally, this switch is disabled.


Configuration Rule and In the case of 1800 M and 900 M network sharing site, it is better to
Adjustment Suggestion handover subscribers of 900 M network to 1800 M network.At this time,
you can transfer traffic by force.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.68 Allow quality handover in uplink(Middle Speed)


Full Name Allow quality handover in uplink(Middle Speed)

Abbreviation hoControlQualUl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality handover in uplink(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

2-963

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.69 Allow level handover in uplink(Middle Speed)


Full Name Allow level handover in uplink(Middle Speed)

Abbreviation hoControlLevUl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level handover in uplink(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-964

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.70 Allow quality handover in downlink(Middle Speed)


Full Name Allow quality handover in downlink(Middle Speed)

Abbreviation hoControlQualDl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality handover in downlink(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-965

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.71 Allow level handover in downlink(Middle Speed)


Full Name Allow level handover in downlink(Middle Speed)

Abbreviation hoControlLevDl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level handover in downlink(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-966

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.72 Allow downlink rapid handover(Middle Speed)


Full Name Allow downlink rapid handover(Middle Speed)

Abbreviation hoControlRapidNLevDl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow downlink rapid handover(Middle Speed)

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason based on actual scene setting

This handover is mainly applied to the high-speed


scenario. This handover algorithm requires the areas along the railway
are covered by sites in link shape, and the adjacent cell has enough
Configuration Rule and
overlapped coverage areas.Handover decisions can be made faster
Adjustment Suggestion
through
configuring the adjacent cell with the direction attribute, so as
to enhance handover success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-967

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.73 Allow C/I limited handover(Middle Speed)


Full Name Allow C/I limited handover(Middle Speed)

Abbreviation hoControlCINCell_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether handover to C/I limited adjacent cell


is supported in intermediate speed scenarios.
Suppose A is a serving cell. B and C are neighbor cells of A. Then B
is a C/I limited neighbor cell of C. If both B and C meet the handover
conditions and C/I threshold crossing occurs, the handover is limited to
the neighbor cell B.
This parameter uses the 24th bit of the HoControl field (DWORD data
type).
Description This parameter is available in V6.20.21 and later versions.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Under the turnoff scenario, this function can


Configuration Rule and
be enabled for individual cells in order to prevent the tangential
Adjustment Suggestion
cross-coverage cell.Generally, this function should not be set.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-968

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.74 Allow downlink quality rapid handover(Middle Speed)


Full Name Allow downlink quality rapid handover(Middle Speed)

Abbreviation hoControlRadpidQDl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on TCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in intermediate-speed scenarios. This algorithm
uses the raw measurement data of downlink quality, applies no window
for neighbor cells, and shares the N value used for other handover
decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value The default value is only enabled for the cell
Configuration Reason of poor downlink quality, rather than common cells.

2-969

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and Generally, This switch is enabled only when


Adjustment Suggestion downlink quality is poor and strong interference occurs to the cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.75 Allow intra-Cell handover attempt due to uplink


interference(Low Speed)
Full Name Allow intra-Cell handover attempt due to uplink interference(Low Speed)

Abbreviation hoControlIntfUl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the intra-cell TCH handover due to up-
Description link interference can be performed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Due to the practical application of the net

2-970

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.76 Allow intra-Cell handover attempt due to downlink


interference(Low Speed)
Allow intra-Cell handover attempt due to downlink interference(Low
Full Name Speed)

Abbreviation hoControlIntfDl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow intra-cell handover attempt


Description due to downlink interference.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason based on actual scene setting

2-971

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

it is advised to enable intra-cell handover


Configuration Rule and
(except for the handover of the single-carrier cell, and network configured
Adjustment Suggestion
with frequency hopping) to improve the communication quality.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.77 Allow handover due to distance(Low Speed)


Full Name Allow handover due to distance(Low Speed)

Abbreviation hoControlDistance_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines whether to allow standard PBGT handover.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Unless otherwise required, this switch should


Adjustment Suggestion not be enabled.

Change Mode Offline

2-972

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.78 Allow standard PBGT handover(Low Speed)


Full Name Allow standard PBGT handover(Low Speed)

Abbreviation hoControlPbgt_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines whether to allow handover due to distance.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-973

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.79 Allow automatic handover due to traffic(Low Speed)


Full Name Allow automatic handover due to traffic(Low Speed)

Abbreviation hoControlLoad_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow automatic handover based


Description on traffic.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Due to the practical application of the net.Suggest to close when it
Adjustment Suggestion is not used.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-974

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.80 Allow intra-cell handover in super TRX channel due to


downlink interference(Low Speed)
Allow intra-cell handover in super TRX channel due to downlink interfer-
Full Name ence(Low Speed)

Abbreviation hoControlIntfUlSTrx_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow intra-cell handover in super


Description TRX channel due to downlink interference.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-975

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.81 Allow intra-cell handover in super TRX channel due to


uplink interference(Low Speed)
Allow intra-cell handover in super TRX channel due to uplink interfer-
Full Name ence(Low Speed)

Abbreviation hoControlIntfDlSTrx_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow intra-cell handover in super


Description TRX channel due to uplink interference.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-976

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.82 Allow adjacent cells handover in super TRX channel due


to PBGT(Low Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(Low
Full Name Speed)

Abbreviation hoControlPbgtSTrx_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow adjacent cells handover in


Description super TRX channel due to PBGT

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-977

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.83 Allow dynamic adjustment of handover priority


Full Name Allow dynamic adjustment of handover priority

Abbreviation hoControlPrioChg

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow dynamic adjustment of


handover priority.
Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and For the network with relatively high handover
Adjustment Suggestion congestion, it is recommended to enable this switch.

Change Mode Offline

Related features ZGO-02-02-002 Dynamic Handover Priority Algorithm

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-978

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.84 Allow rapid handover(Low Speed)


Full Name Allow rapid handover(Low Speed)

Abbreviation hoControlRapidLevUl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow rapid handover.


Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Uplink rapid attenuation handover is mainly


Configuration Rule and
applied to the rapid attenuation due to fast moving, strong directionality,
Adjustment Suggestion
and blocking.

Change Mode Offline

Related features ZGO-02-02-006 Rapid Level Drop Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

2-979

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.24.85 Allow Macro-Micro delay handover(Low Speed)


Full Name Allow Macro-Micro delay handover(Low Speed)

Abbreviation hoControlMacroMicro_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines whether to allow Macro-Micro delay handover.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

The macro-micro handover is to share traffic of the dual-layer or


multilayer network. Its main application scenario is the dual-frequency
Configuration Rule and
network in urban areas.
Adjustment Suggestion
If the macro-micro handover delay switch is enabled, congestion can be
eased but the coverage rate will be influenced.

Change Mode Offline

Related features ZGO-02-02-001 Handover Between Macro- and Micro-cells

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

2-980

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.24.86 Allow Micro-Micro delay handover(Low Speed)


Full Name Allow Micro-Micro delay handover(Low Speed)

Abbreviation hoControlMicroMicro_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines if to allow Micro-Micro delay handover.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and


Adjustment Suggestion Generally, this switch is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-981

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.87 Allow force transfer handover(Low Speed)


Full Name Allow force transfer handover(Low Speed)

Abbreviation hoControlForceMove_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines whether to allow forced transfer handover.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Generally, this switch is disabled.


Configuration Rule and In the case of 1800 M and 900 M network sharing site, it is better to
Adjustment Suggestion handover subscribers of 900 M network to 1800 M network.At this time,
you can transfer traffic by force.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-982

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.88 Allow quality handover in uplink(Low Speed)


Full Name Allow quality handover in uplink(Low Speed)

Abbreviation hoControlQualUl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether quality handover in uplink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.89 Allow level handover in uplink(Low Speed)


Full Name Allow level handover in uplink(Low Speed)

2-983

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation hoControlLevUl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether level handover in uplink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.90 Allow quality handover in downlink(Low Speed)


Full Name Allow quality handover in downlink(Low Speed)

Abbreviation hoControlQualDl_L

Managed Object Handover Control

2-984

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether quality handover in downlink is


allowed.
Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.91 Allow level handover in downlink(Low Speed)


Full Name Allow level handover in downlink(Low Speed)

Abbreviation hoControlLevDl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-985

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter describes whether level handover in downlink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, quality handover in uplink is set


Adjustment Suggestion to be allowed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.92 Allow downlink rapid handover(Low Speed)


Full Name Allow downlink rapid handover(Low Speed)

Abbreviation hoControlRapidNLevDl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to enable SDCCH downlink rapid


handover.
Description This parameter is supported from version 6.20.614b.

2-986

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason based on actual scene setting

This handover is mainly applied to the high-speed


scenario. This handover algorithm requires the areas along the railway
are covered by sites in link shape, and the adjacent cell has enough
Configuration Rule and
overlapped coverage areas.Handover decisions can be made faster
Adjustment Suggestion
through
configuring the adjacent cell with the direction attribute, so as
to enhance handover success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.93 Allow C/I limited handover(Low Speed)


Full Name Allow C/I limited handover(Low Speed)

Abbreviation hoControlCINCell_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-987

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates whether the function of handover for C/I limited
adjacent cell is supported. Suppose A is the service cell, B and C are
adjacent cells of A, and B is the C/I limited adjacent cell of C. If B and
C all satisfy the handover condition and the C/I limited adjacent cell's
handover threshold is also satisfied, then the adjacent cell C should be
filtered during the adjacent cell handover, in other words, C can not be
taken as an adjacent cell for handover.
Description This parameter is supported from version 6.20.21.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Under the turnoff scenario, this function can


Configuration Rule and
be enabled for individual cells in order to prevent the tangential
Adjustment Suggestion
cross-coverage cell.Generally, this function should not be set.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.94 Allow downlink quality rapid handover(Low Speed)


Full Name Allow downlink quality rapid handover(Low Speed)

Abbreviation hoControlRadpidQDl_L

2-988

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow downlink quality rapid han-


Description dover.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value The default value is only enabled for the cell
Configuration Reason of poor downlink quality, rather than common cells.

Configuration Rule and Generally, This switch is enabled only when


Adjustment Suggestion downlink quality is poor and strong interference occurs to the cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.95 Synchronism
Full Name Synchronism

Abbreviation hoSyncInd

Managed Object Handover Control

3GPP Name N/A

2-989

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates whether synchronous handover to a cell is


allowed.
If the BSC detects that the timing advance of the cell (target cell) is equal
Description to that of the source cell, synchronous handover to the cell is allowed.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

The default value is used. Usually, synchronization


Configuration Rule and
handover occurs in the common network, so the default value should
Adjustment Suggestion
be enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.96 Asynchronism
Full Name Asynchronism

Abbreviation hoNSyncInd

Managed Object Handover Control

3GPP Name N/A

2-990

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter indicates whether asynchronous handover to a cell is


allowed.
If the BSC fails to obtain the timing advance of the cell (target cell), only
Description asynchronous handover to the cell is allowed.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

The default value is used. Usually, synchronization


Configuration Rule and
handover occurs in the common network, so the default value should
Adjustment Suggestion
be enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.97 Pseudo-synchronism
Full Name Pseudo-synchronism

Abbreviation hoFSyncInd

Managed Object Handover Control

3GPP Name N/A

2-991

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates whether pseudo-synchronous handover to a


cell is allowed.
If an MS can calculate the timing advance of the cell (target cell) and
the MS supports pseudo-synchronous handover, pseudo-synchronous
Description handover to the cell is allowed.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason based on field pritical request

Configuration Rule and Currently, this function is not supported and


Adjustment Suggestion is disabled.

Change Mode Offline

Related features ZGB-02-02-003 Handover Mode

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.98 Pre-synchronism
Full Name Pre-synchronism

Abbreviation hoPSyncInd

Managed Object Handover Control

3GPP Name N/A

2-992

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter indicates whether pre-synchronous handover to a cell


is allowed.
If the BSC obtains the timing advance of the cell (target cell) and
considers the timing advance when sending a handover command,
Description pre-synchronous handover to the cell is allowed.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and The default value is used, and usually it is


Adjustment Suggestion disabled. At present, this function cannot be supported.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.99 Prior layer selecting parameter on signal level/quality


Full Name Prior layer selecting parameter on signal level/quality

Abbreviation layerPriority

Managed Object Handover Control

3GPP Name N/A

2-993

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter decides the priority to select and sequence the candidate
cells for handover. Received signal level and signal quality decides the
candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell, then
to those at the same layer, and finally to other adjacent cells;
First hand over to adjacent cells at the same layer of the local cell, then
to those at the upper layer, and finally to other adjacent cells;
All adjacent cells are treated in the same way.
This parameter determines to select one of above three methods.
During handover control process, this parameter has higher priority
than normal adjacent cells.
Value Range:
1 (UPPER_LAYER): adjacent cell at above layer first, same layer
next,other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at same layer first, above layer next,
other adjacent cells finally;
3 (ALL_LAYER): all adjacent cells are same.
Note: In general, micro cell adopts option 1 and macro cell adopts
Description option 2.

Instance Cell

1: UPPER_LAYER
2: SAME_LAYER
Value Range and Step 3: ALL_LAYER

Unit N/A

Default Value 2

Default Value ThIS Parameter is no longer used. The default


Configuration Reason value is kept.

Configuration Rule and ThIS Parameter is no longer used. The default


Adjustment Suggestion value is kept.

Change Mode Offline

Related features ZGO-02-02-002 Dynamic Handover Priority Algorithm

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-994

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.100 Rapid handover Threshold


Full Name Rapid handover Threshold

Abbreviation rapidHoThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

During fast fading handover, some parameters shall be used. If the mea-
sured signal intensity of a call is less than rapid handover threshold, then it
triggers handover of existing cell to most probable candidate cell. "Rapid-
HoThs" may be set as 15 (that is, -96dBm ~ -95dBm) by default, the same
Description as the level threshold of ordinary handover.

Instance Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
Value Range and Step
19:-92~-91

2-995

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

2-996

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit dBm

Default Value 10

Default Value
Configuration Reason experience value

Rapid handover is characterized by fast speed,


Configuration Rule and so the handover threshold should not be too large. MS will move to
Adjustment Suggestion the area with high cell level soon. N value cannot be too large, otherwise
the timeliness of handover judgement will be influenced.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.101 Rapid handover Value N


Full Name Rapid handover Value N

Abbreviation rapidHoN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

During fast fading handover, some parameters shall be used. If the


measured signal intensity of a call is less than rapid handover threshold,
then it triggers handover of existing cell to most probable candidate cell.
"RapidHoThs" may be set as 15 (that is, -96dBm ~ -95dBm) by default,
the same as the level threshold of ordinary handover. RapdiHoN counter
defines the minimum times for which the measured signal intensity of
Description a call is less than the threshold.

2-997

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

Rapid handover is characterized by fast speed,


Configuration Rule and so the handover threshold should not be too large. MS will move to
Adjustment Suggestion the area with high cell level soon. N value cannot be too large, otherwise
the timeliness of handover judgement will be influenced.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.102 Handover to same layer other band neighbour cell for


PBGT permitted
Full Name Handover to same layer other band neighbour cell for PBGT permitted

Abbreviation pbgtHoLayerSame

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether it is allowed to perform PBGT handover


Description to the same layer adjacent cell with different frequency band.

Instance Cell

2-998

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value Usually, PBGT handover is used at the same


Configuration Reason layer.

Configuration Rule and Usually, PBGT handover is used at the same


Adjustment Suggestion layer, so that MS can select a better cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.103 Handover to neighbour cell with no Layer Relation for


PBGT permitted
Full Name Handover to neighbour cell with no Layer Relation for PBGT permitted

Abbreviation pbgtHoLayerUndefine

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether it is allowed to perform PBGT handover


Description to adjacent cell with no layer relationship.

Instance Cell

Value Range and Step 0..1

Unit N/A

2-999

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 1

Default Value The layer relationship is unclear. PBGT handover


Configuration Reason is allowed when MS does not use the layered structure.

Usually, after layers are set for the cell


Configuration Rule and
which needs PBGT handover, set not to perform PBGT handover on the
Adjustment Suggestion
undefined layer.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.104 Handover to upper layer neighbour cell for PBGT permitted


Full Name Handover to upper layer neighbour cell for PBGT permitted

Abbreviation pbgtHoLayerUp

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether the PBGT handover to the upper layer
Description adjacent cell is allowed.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value This parameter is used to make the lower layer


Configuration Reason absorb traffic easily.

2-1000

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Usually, handover to the upper layer adjacent


Configuration Rule and cell is not allowed.After this function is disabled, the traffic under
Adjustment Suggestion special scenario can be shared and congestion can be alleviated, but
the call drop rate and coverage rate may be influenced..

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.105 Handover to under layer neighbor cell for PBGT permitted


Full Name Handover to under layer neighbor cell for PBGT permitted

Abbreviation pbgtHoLayerLow

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether the PBGT handover to the lower layer
Description adjacent cell is allowed.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value Layered structure is not set for the common


Configuration Reason network. The value is "No" by default.

2-1001

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Usually, in the layered network, handover to


Configuration Rule and
the lower layer adjacent cell is allowed.If it is not allowed, a negative
Adjustment Suggestion
impact is brought on the congestion rate under the special scenario.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.106 Penalty time for handover failure


Full Name Penalty time for handover failure

Abbreviation hoFailPenalTime

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter defines the penalty time for destination cell if MS fails
to handover to the destination cell or channel allocation fails during han-
dover. During the penalty time, this parameter is used to perform an offset
Description on the level of this cell. This parameter determines penality duration.

Instance Cell

Value Range and Step 1..255

Unit N/A

Default Value 14

The default value is in accordance with the


Default Value
preprocessed value. If the preprocessed value 2, the penalty time
Configuration Reason
is about 7 seconds which is enough for the change of radio environment.

2-1002

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The default value is on the basis of the preprocessed


Configuration Rule and
value. It should be adjusted to a larger value if the preprocessed
Adjustment Suggestion
value is unavailable.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.107 Difference of dynamic priority


Full Name Difference of dynamic priority

Abbreviation dynPrioOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter defines a tolerable dynamic priority difference between


the destination cell and local cell during a handover when using direction-
based handover algorithm. During handover, if the first cells dynamic
handover priority is higher than that of the second cell but the second cell
is in MS moving direction, then the direction-based handover algorithm
works if the difference between the two cells handover priorities is within
Description the tolerable difference. MS is handover to the second cell.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 1

2-1003

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason experience value

This parameter affects the priority of the


Configuration Rule and candidate cell. The larger this parameter is, the greater the priority
Adjustment Suggestion difference between to dynamic cells should be, so as to change the
priority of two cells.

Change Mode Offline

Related features ZGO-02-02-002 Dynamic Handover Priority Algorithm

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.108 PBGT difference


Full Name PBGT difference

Abbreviation pbgtOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter defines a tolerable PBGT difference.During handover, if


the first cells PBGT is higher than that of the second cell but the second
cell is in MS moving direction, then the direction-based handover algo-
rithm works if the difference between the two cells PBGTs is within the
tolerable difference. MS is handover to the second cell. This parameter
Description indicates this allowable difference.

Instance Cell

Value Range and Step 0..20

Unit dB

2-1004

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 3

Default Value
Configuration Reason experience value

This parameter affects the priority of the


Configuration Rule and candidate cell. The larger this parameter is, the greater the power
Adjustment Suggestion budget difference between two cells should be, so as to change the
priority of two cells.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.109 Same layer permitted on traffic HO


Full Name Same layer permitted on traffic HO

Abbreviation TrafficHoLayerCtl_0

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a neighbor cell of the same layer can
Description be considered as a target cell during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

2-1005

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Usually, traffic handover occurs at the same


Default Value
layer or the lower layer, so as to save the resources at the upper
Configuration Reason
layer.

According to the layered network configuration


Configuration Rule and
on site, select the destination layer of traffic handover to alleviate
Adjustment Suggestion
congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.110 Upper layer permitted on traffic HO


Full Name Upper layer permitted on traffic HO

Abbreviation TrafficHoLayerCtl_1

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a neighbor cell of the upper layer can
Description be considered as a target cell during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

2-1006

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Usually, traffic handover occurs at the same


Default Value
layer or the lower layer, so as to save the resources at the upper
Configuration Reason
layer.

According to the layered network configuration


Configuration Rule and
on site, select the destination layer of traffic handover to alleviate
Adjustment Suggestion
congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.111 Lower layer permitted on traffic HO


Full Name Lower layer permitted on traffic HO

Abbreviation TrafficHoLayerCtl_2

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a neighbor cell of the lower layer can
Description be considered as a target cell during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

2-1007

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Usually, traffic handover occurs at the same


Default Value
layer or the lower layer, so as to save the resources at the upper
Configuration Reason
layer.

According to the layered network configuration


Configuration Rule and
on site, select the destination layer of traffic handover to alleviate
Adjustment Suggestion
congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.112 Undefined layer permitted on traffic HO


Full Name Undefined layer permitted on traffic HO

Abbreviation TrafficHoLayerCtl_3

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a neighbor cell of the unknown layer


Description can be considered as a target cell during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

2-1008

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Usually, traffic handover occurs at the same


layer or the lower layer, to save the resources at the upper
Default Value
layer.
Configuration Reason
The undefined layed is applied to the non-hierachical network and can
be set as the target cell of traffic handover as required.

According to the layered network configuration


Configuration Rule and
on site, select the destination layer of traffic handover to alleviate
Adjustment Suggestion
congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.113
GSM900 frequency band P-GSM
permitted on traffic HO
GSM900 frequency band P-GSM
Full Name permitted on traffic HO

Abbreviation TrafficHoFreqCtl_0

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the basic GSM9000 frequency-


band (P-GSM) (ARFCN = 1 ~ 124) adjacent cell to be used as the target
Description cell to which traffic handover is performed.

2-1009

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value In most cases, the GSM900 is applied in target


Configuration Reason cells during traffic handover.

According to the frequency band used in the


Configuration Rule and
on-site network, configure the destination frequency band used during
Adjustment Suggestion
traffic handover, so as to alleviate congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.114 EXT900 frequency band E-GSM permitted on traffic HO


Full Name EXT900 frequency band E-GSM permitted on traffic HO

Abbreviation TrafficHoFreqCtl_1

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the basic GSM9000 frequency-


band (E-GSM) (ARFCN = 0 ~ 124975 ~ 1023) adjacent cell to be used
Description as the target cell to which traffic handover is performed.

Instance Cell

2-1010

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value In few cases, the E-GSM is applied in target


Configuration Reason cells during traffic handover.

According to the frequency band used in the


Configuration Rule and
on-site network, configure the destination frequency band used during
Adjustment Suggestion
traffic handover, so as to alleviate congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.115 DCS1800 frequency band permitted on traffic HO


Full Name DCS1800 frequency band permitted on traffic HO

Abbreviation TrafficHoFreqCtl_2

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the DCS1800 frequency-band


(DCS1800) (ARFCN = 512 ~ 885) adjacent cell to be used as the target
Description cell to which traffic handover is performed.

Instance Cell

2-1011

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value In few cases, the DCS1800 is applied in target


Configuration Reason cells during traffic handover.

According to the frequency band used in the


Configuration Rule and
on-site network, configure the destination frequency band used during
Adjustment Suggestion
traffic handover, so as to alleviate congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.116 PCS1900 frequency band permitted on traffic HO


Full Name PCS1900 frequency band permitted on traffic HO

Abbreviation TrafficHoFreqCtl_4

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the PCS1900 frequency-band


(PCS1900) (ARFCN = 512 ~ 810) adjacent cell to be used as the target
Description cell to which traffic handover is performed.

Instance Cell

2-1012

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value In few cases, the GSM1900 is applied in target


Configuration Reason cells during traffic handover.

According to the frequency band used in the


Configuration Rule and
on-site network, configure the destination frequency band used during
Adjustment Suggestion
traffic handover, so as to alleviate congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.117 GSM850 frequency band permitted on traffic HO


Full Name GSM850 frequency band permitted on traffic HO

Abbreviation TrafficHoFreqCtl_5

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow the GSM850 frequency-band


E-GSM (ARFCN = 128~251) adjacent cell to be used as the target cell to
Description which traffic handover is performed.

Instance Cell

2-1013

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value In few cases, the GSM850 is applied in target


Configuration Reason cells during traffic handover.

According to the frequency band used in the


Configuration Rule and
on-site network, configure the destination frequency band used during
Adjustment Suggestion
traffic handover, so as to alleviate congestion.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.24.118 Threshold of traffic for handover


Full Name Threshold of traffic for handover

Abbreviation trafficThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

If TCH occupation rate of a cell is greater than this parameter value (num-
ber of occupied TCH channels / number of total TCH channels, not includ-
ing blocked idle channels), then it indicates the cell is too busy, and traffic
Description handover is triggered for the cell.

Instance Cell

2-1014

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..100

Unit %

Default Value 80

Default Value It is proper to initiate congestion control


Configuration Reason when the cell load reaches 80% and a few channels are available and.

For the cell with fewer channels, channel congestion


Configuration Rule and
occurs easily caused by the burst services, so this parameter can
Adjustment Suggestion
be set as relatively small.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.119 Traffic handover threshold


Full Name Traffic handover threshold

Abbreviation trafficLevThs

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

This parameter is used for traffic handover. For the original handover
condition that adjacent cells level must be higher than that of this cell,
modify it so that adjacent cells level must be higher than this threshold.In
this way, traffic handover can be improved greatly. This threshold must
be less than the PBGT threshold in reverse direction. Otherwise, it may
Description result in toggle handover.

2-1015

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..48

Unit dB

Default Value 24

Default Value Traffic is traffic switching to consider the balance of the target cell level
Configuration Reason can not be less than the serving cell

This parameter is valid after automatic handover based on traffic


(HoControl6) is allowed.Note that the threshold of PBGT handover
in the reverse direction of the destination cell needs to be raised for
compensation.
Configuration Rule and
Under the dense traffic scenario, the smaller this parameter is, the
Adjustment Suggestion
stronger the capability of absorbing traffic of the destination Nclayer
cell or frequency band cell is, the easier the traffic can be handed out
(the traffic threshold shall be reached), which helps alleviate the TCH
channel congestion of the cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.120 Level offset during penalty


Full Name Level offset during penalty

Abbreviation penaltyLevOffset

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

2-1016

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used to perform an offset on the downlink level of this


Description cell in the penalty period.

Instance Cell

Value Range and Step 0..63

Unit dB

Default Value 15

Default Value
Configuration Reason The value of field experience

The system allows three times handover failure


to a certain destination cell. When the second or third handover decision
is made, an offset is manually performed on the level of the destination
Configuration Rule and cell to which handover fails for the first time. If the destination
Adjustment Suggestion cell still takes the first priority compared with other adjacent cells
after its level is reduced manually, go on initiating handover to
it. After the attempt fails for three times, shield it in the penalty
period.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.121 Uplink interference quality offset


Full Name Uplink interference quality offset

Abbreviation qOffSetUl

Managed Object Handover Control

3GPP Name N/A

2-1017

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates that the relationship between the level and
quality determines whether channels are interfered during the inter-cell
handover. When IntraHoUlLevP out of IntraHoUlLevN measurements
satisfy rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition
is satisfied. Where, rxqual-ul is the uplink quality, QOffSetUL is the
uplink quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
Following is the algorithm:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After the occurrence of channel interference is ensured, services should
inform the database about the current channel occupation rate when
Description applying to the database for appropriate channels.

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 10

Default Value Setting of the default value is in accordance


Configuration Reason with the common uplink interference environment.

The larger the value is, the higher the quality


Configuration Rule and tolerability under the corresponding level is, and it is more difficult
Adjustment Suggestion to initiate quality handover which should be adjusted in accordance
with the actual network situation.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-1018

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.122 Uplink interference level offset


Full Name Uplink interference level offset

Abbreviation sOffSetUl

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates that the relationship between the level and
quality determines whether channels are interfered during the inter-cell
handover. When IntraHoUlLevP out of IntraHoUlLevN measurements
satisfy rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition
is satisfied. Where, rxqual-ul is the uplink quality, QOffSetUL is the
uplink quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
Following is the algorithm:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After the occurrence of channel interference is ensured, services should
inform the database about the current channel occupation rate when
Description applying to the database for appropriate channels.

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 15

Default Value Setting of the default value is in accordance


Configuration Reason with the common uplink interference environment.

2-1019

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The larger the value is, the higher the requirement


on quality handover is, and it is more difficult to initiate quality
Configuration Rule and
handover which should be adjusted in accordance with the actual
Adjustment Suggestion
network
situation.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.123 Downlink interference quality offset


Full Name Downlink interference quality offset

Abbreviation qOffSetDl

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates that the relationship between the level and
quality determines whether channels are interfered during the inter-cell
handover. When IntraHoUlLevP out of IntraHoDlLevN measurements
satisfy rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the
handover condition is satisfied. Where, rxqual-dl is the downlink quality,
QOffSetDL is the downlink quality offset, RXLEV_DL is the downlink
level, SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding downlink
quality offset (SOffSetDl). Following is the algorithm:
Description 255 AvRxlevDL(n) < SOffSetDL + 20

2-1020

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <


SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
After the occurrence of channel interference is ensured, services should
inform the database about the current channel occupation rate when
applying to the database for appropriate channels.

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 10

Default Value Setting of the default value is in accordance


Configuration Reason with the common downlink interference environment.

The larger the value is, the higher the quality


Configuration Rule and tolerability under the corresponding level is, and it is more difficult
Adjustment Suggestion to initiate quality handover which should be adjusted in accordance
with the actual network situation.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.124 Downlink interference level offset


Full Name Downlink interference level offset

Abbreviation sOffSetDl

Managed Object Handover Control

2-1021

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter indicates that the relationship between the level and
quality determines whether channels are interfered during the inter-cell
handover. When IntraHoUlLevP out of IntraHoDlLevN measurements
satisfy rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the
handover condition is satisfied. Where, rxqual-dl is the downlink quality,
QOffSetDL is the downlink quality offset, RXLEV_DL is the downlink
level, SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding downlink
quality offset (SOffSetDl). Following is the algorithm:
255 AvRxlevDL(n) < SOffSetDL + 20
InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <
SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
After the occurrence of channel interference is ensured, services should
inform the database about the current channel occupation rate when
Description applying to the database for appropriate channels.

Instance Cell

Value Range and Step 0..20

Unit dB

Default Value 10

Default Value Setting of the default value is in accordance


Configuration Reason with the common downlink interference environment.

The larger the value is, the higher the requirement


on quality handover is, and it is more difficult to initiate quality
Configuration Rule and
handover which should be adjusted in accordance with the actual
Adjustment Suggestion
network
situation.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1022

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.125 Invalid intra-handover time


Full Name Invalid intra-handover time

Abbreviation tMaxIHo

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

If MS performs handover continuously in the cell, it indicates great


interference in this position and no appropriate channel is available.
In such a case, MS shall be forbidden to perform handover within a
certain time. The judgment method is as follows: If handover occurs
within the invalid intra-handover time, then the previous handover is
considered to have no influence on interference, the counter HoCount
increases by 1 and restart TMaxIHo. If handover occurs after the invalid
intra-handover time, the previous handover is considered valid and clear
the counter to 0.
If the counter value reaches the value of MAX count of invalid
intra-handover parameter, then it indicates not to attempt handover
Description within a certain period. Perform penalty in intra-cell penalty mode.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 16

Usually, if the handover occurs continuously


Default Value within 16 measurement reports (or preprocessing reports), it is
Configuration Reason considered
as too frequent.

If the time is adjusted as too short, the invalid handover is easily to be


Configuration Rule and judged as valid handover.
Adjustment Suggestion If the time is adjusted as too long, the valid handover is easily to be
judged as invalid handover.

2-1023

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.126 MAX count of invalid intra-handover


Full Name MAX count of invalid intra-handover

Abbreviation maxIHo

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

If MS performs handover continuously in the cell, it indicates great


interference in this position and no appropriate channel is available.
In such a case, MS shall be forbidden to perform handover within a
certain time. The judgment method is as follows: If handover occurs
within the invalid intra-handover time, then the previous handover is
considered to have no influence on interference, the counter HoCount
increases by 1 and restart TMaxIHo. If handover occurs after the invalid
intra-handover time, the previous handover is considered valid and clear
the counter to 0.
If the counter value reaches the value of MAX count of invalid
intra-handover parameter, then it indicates not to attempt handover
Description within a certain period. Perform penalty in intra-cell penalty mode.

Instance Cell

Value Range and Step 0..10

Unit N/A

2-1024

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 3

Default Value The default value is used to make a correct


Configuration Reason decision on invalid handover.

If the value is too small, the handover is easily to be judged as invalid


Configuration Rule and and MS is performed on penalty, which is likely to cause call drop.
Adjustment Suggestion If the value is too large, the handover is easily to be judged as invalid
interference handover and the number of invalid handover increases.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.127 MAX path loss threshold on force handover


Full Name MAX path loss threshold on force handover

Abbreviation maxLossThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1025

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Forcible handover only aims at a speccified cell. It should satisfy the


following requirements:
1. The tolerable level difference (MaxLevDiff) should be lower than the
PBGT handover threshold in the reverse direction, to avoid ping-pong
handover.
2. The resoureces of the target cell should be lower than the reserved
resource threshold (HoForceResThs), to prevent the target cell from
congestion.
3. The path loss (L) of the MS should be lower than this parameter's
threshold, and the time advance (TA) of the MS should be less than
the maximum time advance (MaxTAThs) of the forcible handover. This
algorithm applies to a dual-band network, and the 900 M/1800 M cell
sharing the same site.
Where, when MaxTAThs is set to 63, the forcible handover is only
determined by the path loss of the MS. When MaxLossThs is set to 150,
the forcible handover is only determined by the time advance of the MS.
The path loss (L) =BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where
the occupied timeslot locates, and depends on the carrier's maximum
transmission power, static attenuation power, and power control.
AV_RXLEV_DL is the downlink receiving level.
4. HoForceP (value P for determining forcible handover) out of
HoForceN (value N for determining forcible handover) measurement
Description reports should satisfy the requirements for the forcible handover.

Instance Cell

Value Range and Step 0..150

Unit N/A

Default Value 110

Default Value
Configuration Reason experience value

Forced handover shall meet the following requirements:


Level of the destination cell must be higher than that of the local
cell by MaxLevDiff; available resource of the destination cell must
be higher than the handover reserved resource threshold
Configuration Rule and
HoForceResThs;
Adjustment Suggestion
the path loss L must be less than MaxLossThs and the TA must be less
than MaxTAThs. The higher the path loss is, the poorer the signal
intensity of the destination cell is, thereby the max path loss threshold
cannot be too large.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

2-1026

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.128 MAX time advance threshold on force handover


Full Name MAX time advance threshold on force handover

Abbreviation maxTaThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Forcible handover only aims at a speccified cell. It should satisfy the


following requirements:
1. The tolerable level difference (MaxLevDiff) should be lower than the
PBGT handover threshold in the reverse direction, to avoid ping-pong
handover.
2. The resoureces of the target cell should be lower than the reserved
resource threshold (HoForceResThs), to prevent the target cell from
congestion.
3. The path loss (L) of the MS should be lower than this parameter's
threshold, and the time advance (TA) of the MS should be less than
the maximum time advance (MaxTAThs) of the forcible handover. This
algorithm applies to a dual-band network, and the 900 M/1800 M cell
sharing the same site.
Where, when MaxTAThs is set to 63, the forcible handover is only
determined by the path loss of the MS. When MaxLossThs is set to 150,
the forcible handover is only determined by the time advance of the MS.
The path loss (L) =BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where

Description the occupied timeslot locates, and depends on the carrier's maximum

2-1027

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

transmission power, static attenuation power, and power control.


AV_RXLEV_DL is the downlink receiving level.
4. HoForceP (value P for determining forcible handover) out of
HoForceN (value N for determining forcible handover) measurement
reports should satisfy the requirements for the forcible handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

Forced handover shall meet the following requirements:


Level of the destination cell must be higher than that of the local
cell by MaxLevDiff; available resource of the destination cell must
Configuration Rule and be higher than the handover reserved resource threshold
Adjustment Suggestion HoForceResThs;
the path loss L must be less than MaxLossThs and the TA must be less
than MaxTAThs. TA value cnnot be too large. The larger the TA value
is, the poorer the cell signal intensity is.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.129 N value of force handover


Full Name N value of force handover

2-1028

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation hoForceN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Forcible handover only aims at a speccified cell. It should satisfy the


following requirements:
1. The tolerable level difference (MaxLevDiff) should be lower than the
PBGT handover threshold in the reverse direction, to avoid ping-pong
handover.
2. The resoureces of the target cell should be lower than the reserved
resource threshold (HoForceResThs), to prevent the target cell from
congestion.
3. The path loss (L) of the MS should be lower than this parameter's
threshold, and the time advance (TA) of the MS should be less than
the maximum time advance (MaxTAThs) of the forcible handover. This
algorithm applies to a dual-band network, and the 900 M/1800 M cell
sharing the same site.
Where, when MaxTAThs is set to 63, the forcible handover is only
determined by the path loss of the MS. When MaxLossThs is set to 150,
the forcible handover is only determined by the time advance of the MS.
The path loss (L) =BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where
the occupied timeslot locates, and depends on the carrier's maximum
transmission power, static attenuation power, and power control.
AV_RXLEV_DL is the downlink receiving level.
4. HoForceP (value P for determining forcible handover) out of
HoForceN (value N for determining forcible handover) measurement
Description reports should satisfy the requirements for the forcible handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value
Configuration Reason experience value

NWhen P times in the N times decision succeed,


Configuration Rule and
it is allowed to initiate handover. The smaller the N value and P
Adjustment Suggestion
value are, it is easier to initiate handover.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

2-1029

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.130 P value of force handover


Full Name P value of force handover

Abbreviation hoForceP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Forcible handover only aims at a speccified cell. It should satisfy the


following requirements:
1. The tolerable level difference (MaxLevDiff) should be lower than the
PBGT handover threshold in the reverse direction, to avoid ping-pong
handover.
2. The resoureces of the target cell should be lower than the reserved
resource threshold (HoForceResThs), to prevent the target cell from
congestion.
3. The path loss (L) of the MS should be lower than this parameter's
threshold, and the time advance (TA) of the MS should be less than
the maximum time advance (MaxTAThs) of the forcible handover. This
algorithm applies to a dual-band network, and the 900 M/1800 M cell
sharing the same site.
Where, when MaxTAThs is set to 63, the forcible handover is only
determined by the path loss of the MS. When MaxLossThs is set to 150,
the forcible handover is only determined by the time advance of the MS.
The path loss (L) =BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where

Description the occupied timeslot locates, and depends on the carrier's maximum

2-1030

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

transmission power, static attenuation power, and power control.


AV_RXLEV_DL is the downlink receiving level.
4. HoForceP (value P for determining forcible handover) out of
HoForceN (value N for determining forcible handover) measurement
reports should satisfy the requirements for the forcible handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason experience value

NWhen P times in the N times decision succeed,


Configuration Rule and
it is allowed to initiate handover. The smaller the N value and P
Adjustment Suggestion
value are, it is easier to initiate handover.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.131 Level offset for PBGT to up layer


Full Name Level offset for PBGT to up layer

Abbreviation pbgtHoUlLevOffset

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

2-1031

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

To more effectively control traffic distribution in the cell at different layers,


while doing PBGT decision, add PBGT decision offset level in the cell at
upper layer within certain duration which is dependent upon the lag time
Description for handover between different layers.

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 24

Default Value
Configuration Reason The default is not offset

The value 0-48 represents -24db~+25db. Its function is same as PBGT


Margin. That is, add an inter-layer hysteresis value based on the PBGT
Margin, to attenuate or accelerate inter-layer PBGT handover.
Generally, it is better to handover to the lower layer and maintain
Configuration Rule and
intra-layer handover at the lower layer. The PBGT handover to the upper
Adjustment Suggestion
layer is triggered only when the upper-layer signal is always strong.
If the value is large, it assists in traffic balance and congestion reduction,
reduces the possibility of PBGT handover to the upper layer, and affects
the coverage rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.132 Level offset for PBGT to low layer


Full Name Level offset for PBGT to low layer

2-1032

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation pbgtHoDlLevOffset

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

To more effectively control traffic distribution in the cell at different layers,


while doing PBGT decision, add PBGT decision offset level in the cell at
lower layer within certain duration which is dependent upon the lag time
Description for handover between different layers.

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 24

Default Value
Configuration Reason The default is not offset

The value 0-48 represents -24db~+25db. It sfunction is the same as


PBGT Margin. That is, add a inter-layer hysteresis value based on the
PBGT Margin, to attenuate or accelerate inter-layer PBGT handover.
Generally, it is better to handover to the lower layer and maintain
Configuration Rule and
intra-layer handover at the lower layer. The PBGT handover to the upper
Adjustment Suggestion
layer is triggered only when the upper-layer signal is always strong.
If the value is large, it assists in traffic balance and congestion reduction,
reduces the possibility of PBGT handover to the upper layer, and affects
the coverage rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1033

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.133 Lag time for PBGT between different layers


Full Name Lag time for PBGT between different layers

Abbreviation pbgtHoLayerHyst

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

To more effectively control traffic distribution in the cell at different layers,


while doing PBGT decision, add PBGT decision offset level in the cell at
different layers within certain duration, which is lag time for PBGT between
Description different layers.

Instance Cell

Value Range and Step 0..300

Unit s

Default Value 50

Default Value
Configuration Reason experience value

The value will be modified to the default value


Configuration Rule and
(50 s) if it is 0.If the lag time is not timed out, it is necessary
Adjustment Suggestion
to add offset to the PBGT cross-layer handover.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1034

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.134 The threshold for starting PBGT handover


Full Name The threshold for starting PBGT handover

Abbreviation pbgtHoStartThs

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

When the current cell's downlink level is less than the start level threshold
Description for PBGT handover, the PBGT handover decision is performed.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

If the value is large, it is easy to initiate PBGT handover. If the value is


small, it is difficult to initiate PBGT handover.
The value should be large when it is necessary to share traffic.
Otherwise, it is difficult to share traffic and the congestion rate is
Configuration Rule and influenced.
Adjustment Suggestion When it is unnecessary to share traffic, the value can be set to a
relatively small value, which reduces the number of unnecessary
handovers but affects the coverage rate.
It is recommended to set the value of the 900 M cell to the largest in the
900 M and 1800 M dual-frequency network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

2-1035

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.24.135 The priority of the handover from Macro cell to Micro cell
Full Name The priority of the handover from Macro cell to Micro cell

Abbreviation macroMicroHoPrio

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether the macro-micro handover decision


Description has higher priority than the PBGT handover decision.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Generally, the macro-micro handover takes priority


Adjustment Suggestion if it is enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1036

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.136 Handover from macro to micro


Full Name Handover from macro to micro

Abbreviation macroMicroStartThs

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

When the current cell's downlink level is less than or equal to the start level
threshold for macro-micro handover, the macro-micro handover decision
Description is performed.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

Default Value
Configuration Reason The value of field experience

Initially, it is recommended to set this parameter


as the largest, so that the 1800 M cell can absorb more traffic. The
larger this parameter is, it is more likely for the macro-micro handover
Configuration Rule and
to occur, and it is easier for traffic to be transferred to the 1800
Adjustment Suggestion
cell. Adjustment of this parameter depends on the current condition
and subsequent plan of traffic distribution of the 900 cell and 1800
cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

This parameter is valid unless the macro-micro


Relationship
switch hocontrol_13is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1037

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.137 Hysteresis timer when traffic handover


Full Name Hysteresis timer when traffic handover

Abbreviation trafficHysteresisTm

Managed Object Handover Control

3GPP Name None

3GPP Reference N/A

When there are many traffic handovers initiated in the current cell, the
interval between two traffic handovers must be larger than the hysteresis
Description time specified by this parameter.

Instance Cell

Value Range and Step 0..255

Unit s

Default Value 7

Default Value
Configuration Reason NULL

Configuration Rule and This parameter is invalid in this version and


Adjustment Suggestion the default is reserved.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.138 Downlink rapid handover offset of high speed


Full Name Downlink rapid handover offset of high speed

2-1038

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation dLRapidHoOffsetH

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

After getting a series of measurement reports, you can do the decisions


for SDCCH downlink rapid handover.
The downlink rapid is the reason to cause handover. The decision
process is as follows: do the handover if the latest downlink level
values (without average processing) is higher than the sum of relevant
threshold values and offset values. The handover reason is downlink
rapid handover. DLRapidHoOffset_0 defines the offset threshold value
for downlink rapid handover if the train speed is higher than 250km/hr.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason experience value

For the threshold under high speed scenario,


Configuration Rule and rapid handover should be performed, thereby it is better to set the
Adjustment Suggestion offset value to a relatively small value to assist in making handover
decisions.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1039

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.24.139 Downlink rapid handover offset of middle speed


Full Name Downlink rapid handover offset of middle speed

Abbreviation dLRapidHoOffsetM

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Downlink rapid handover decisions depend upon a series measurement


reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and the
offset, perform handover with the cause of downlink rapid handover.This
parameter DLRapidHoOffset_1 defines the offset threshold value for
downlink rapid handover if the train speed is between 150km/hr and
250km/hr.
Description Since the version V6.20.614b, this parameter is supported.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 2

Setting of the default value is in accordance


Default Value
with the radio environment that mostly the speed is 150~250km/h under
Configuration Reason
the high-speed scenario.

The value is applicable to the coverage area under such high-speed


Configuration Rule and scenarios as express ways, and high-speed railways on which the train
Adjustment Suggestion speed is l150~251km/h.
Higher speed requires a smaller offset value to realize a faster handover.

Change Mode Offline

Related features ZGO-02-02-018 Handover Based on Downlink Level Fast Fading

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-1040

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.140 Downlink rapid handover offset of low speed


Full Name Downlink rapid handover offset of low speed

Abbreviation dLRapidHoOffsetL

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

After getting a series of measurement reports, you can do the decisions


for downlink rapid handover.
The downlink rapid is the reason to cause handover. The decision
process is as follows: do the handover if the latest downlink level
values (without average processing) is higher than the sum of relevant
threshold values and offset values. The handover reason is downlink
rapid handover. DLRapidHoOffset_2 defines the offset threshold value
Description for downlink rapid handover if the train speed is lower than 150km/hr.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 5

Setting of the default value is in accordance


Default Value
with the radio environment that mostly the speed is lower than 150
Configuration Reason
km/h under the high-speed scenario.

The value is applicable to the coverage area under such high-speed


Configuration Rule and scenarios as expressways, and high-speed railways on which the train
Adjustment Suggestion speed is lower than 150 km/h.
Higher speed requires a smaller offset value to realize a faster handover.

Change Mode Offline

Related features ZGO-02-02-018 Handover Based on Downlink Level Fast Fading

Related Parameters N/A

This parameter is valid till the downlink rapid


Relationship
handover is supported.

Related Interfaces N/A

2-1041

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.141 Handover back penalty


Full Name Handover back penalty

Abbreviation hoBackPenalty

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This paramter describes the time penalty of handover back to the original
cell. That is, after the handover from cell A to cell B, the handover cannot
Description be performed back to cell A within this period.

Instance Cell

Value Range and Step 0..60

Unit s

Default Value 5

Setting of the default value needs to avoid


Default Value
the increase of handover frequency resulting from toggle handover,
Configuration Reason
and to avoid call drops as much as possible.

If the value is too small, it is easy to perform backward handover to the


Configuration Rule and original cell, toggle handover occurs.
Adjustment Suggestion If the value is too large, it is not easy to perform backward handover to
the original cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1042

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.142 MIN interval between inter-cell emergency handover


Full Name MIN interval between inter-cell emergency handover

Abbreviation HoMinIntervalEmerg

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the emergent inter-cell handover, but not common intra-cell
Description or inter-cell concentric handover.

Instance Cell

Value Range and Step 0..31

Unit s

Default Value 0

If ther emergency handover is not performed,


Default Value
call drop occurs easily, thereby handover is initiated only if the
Configuration Reason
requirement is satisfied by default.

Frequent handover can be avoided by adjusting


Configuration Rule and
this parameter.If the value is adjusted as too large, call drop occurs
Adjustment Suggestion
due to handover failure.

Change Mode Offline

2-1043

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.143 Handover back penalty after emergency handover


Full Name Handover back penalty after emergency handover

Abbreviation HoBackPenaltyEmerg

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes the time limit for handover back to the original
cell. In other words, after emergent handover is performed from cell A
to cell B, it is not allowed to perform handover from cell B back to cell A
Description within the time limit.

Instance Cell

Value Range and Step 0..60

Unit s

Default Value 15

Setting of the default value needs to avoid


Default Value
the increase of handover frequency resulting from toggle handover,
Configuration Reason
and to avoid call drops as much as possible.

If the value is too small, it is easy to perform backward handover to the


Configuration Rule and original cell, toggle handover occurs.
Adjustment Suggestion If the value is too large, it is not easy to perform backward handover to
the original cell.

2-1044

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.144 Neighbour cell for emergency handover


Full Name Neighbour cell for emergency handover

Abbreviation NCellWindowEmerg

Managed Object Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter indicates the size of the window used for calculating the
average value of signal strength of the neighbour cell with emergent
Description handover. The size is the number of samples used in averaging.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

2-1045

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Number of samples should be enough for ensuring


Default Value the preciseness of handover decision, and for initiating handover
Configuration Reason as early as possible to avoid call drop when the signal is poor during
communication.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.145 Downlink rapid quality drop THS


Full Name Downlink rapid quality drop THS

Abbreviation DLQualRapidHoThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold of downlink rapid quality drop.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 8..70

Unit N/A

2-1046

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 60

Default Value
Configuration Reason experience value

The smaller is the threshold and value N, the


Configuration Rule and
easier is the quality handover, the easier is the handover of MS out
Adjustment Suggestion
of poor quality cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.146 Downlink rapid quality drop Value N


Full Name Downlink rapid quality drop Value N

Abbreviation DLQualRapidHoN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the value N of downlink rapid quality drop.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

2-1047

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The smaller is the threshold and value N, the


Configuration Rule and
easier is the quality handover, the easier is the handover of MS out
Adjustment Suggestion
of poor quality cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.147 Quality weight of recent measure value


Full Name Quality weight of recent measure value

Abbreviation QualityAverageWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

The quality weight of measurement report is represented by 20


parameters. The average uplink quality and average downlink
quality use this group of parameters.The first parameter indicates
the weight of the latest measurement report.For example, if quality
weight is 100, 80, 60, or 40, and the quality average window size is 4,
QAVG=(Q1*100+Q2*80+Q3*60+Q4*40)/(100+80+60+40) (Q1 is the
Description latest measurement value of quality) when quality is averaged.

Instance Cell

Value Range and Step 1..100

Unit N/A

[100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,1
Default Value 00,100,100,100]

2-1048

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The default value uses the same weight.

The latest measurement report is set as the


Configuration Rule and
larger weight. The handover success rate, call drops due to handover,
Adjustment Suggestion
and RQ reflect the effect of parameter setting.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.148 Level weight of recent measurement value level


Full Name Level weight of recent measurement value level

Abbreviation LevelAverageWeight

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes the level weight of recent Nth measurement


Description value.

Instance Cell

Value Range and Step 1..100

Unit N/A

[100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,1
Default Value 00,100,100,100]

2-1049

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is newly added in the 61 version.


Default Value
All levels keep the same weight by default so that the handover index
Configuration Reason
does not fluctuate before and after upgrade.

Configuration Rule and If necessary, it is recommended to adjust the


Adjustment Suggestion weight of the latest level to the highest.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.149 The load of HO from FR to HR(V3)


Full Name The load of HO from FR to HR(V3)

Abbreviation frtoamrhrholoadthr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a load threshold for initiating FR/HR (V3)


handover. When the load of a cell reaches the threshold, an FR/HR (V3)
handover is initiated to obtain more channel resources and improve
the system capacity.
This threshold must be equal to or less than FrToHrHoLoadThr.
Load formula: LOAD = Number of busy channels in the cell
Description 100/(Number of busy channels + Number of idle channels)

Instance Cell

Value Range and Step 20..100

Unit %

2-1050

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 80

When the cell load reaches 80%, the cell is


Default Value
regarded as a busy cell. In this case, handover from FR to HR (V3)
Configuration Reason
can be performed to enhance system capacity.

This parameter is valid only when the FRTHRHOSupport switch is


enabeld in the cell.
Configuration Rule and
The larger the value is, the higher is the cell load required for initiating
Adjustment Suggestion
FR->HR(V3) handover, and the ;less is the opportunity for handover.
If the value is too small, the number of intra-cell handovers increases.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters FRTHRHOSupport


FrToHrHoLoadThr

This parameter is valid only when the FRTHRHOSupport switch is


Relationship enabled in the cell.
FrToHrHoLoadThr>=FrToAmrHrHoLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail New

2.24.150 The load of HO from FR to HR(V1)


Full Name The load of HO from FR to HR(V1)

Abbreviation frtohrholoadthr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1051

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter specifies a load threshold for initiating FR/HR (V1)


handover. When the load of a cell reaches the threshold, an FR/HR (V1)
handover is initiated to obtain more channel resources and improve
the system capacity.
This threshold must be equal to or greater than FrToAmrHrHoLoadThr.
Load formula: LOAD = Number of busy channels in the cell
Description 100/(Number of busy channels + Number of idle channels)

Instance Cell

Value Range and Step 20..100

Unit %

Default Value 90

When the cell load reaches 80%, the cell is


Default Value
regarded as a busy cell. In this case, handover from FR to HR (V1)
Configuration Reason
can be performed to enhance system capacity.

This parameter is valid only when the FRTHRHOSupport switch is


enabeld in the cell.
Configuration Rule and
The larger the value is, the higher is the cell load required for initiating
Adjustment Suggestion
FR->HR(V1) handover, and the less is the opportunity for handover.
If the value is too small, the number of intra-cell handovers increases.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters FRTHRHOSupport


FrToAmrHrHoLoadThr

This parameter is valid only when the FRTHRHOSupport switch is


Relationship enabled in the cell.
FrToHrHoLoadThr>=FrToAmrHrHoLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2-1052

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.151 The quality of HO from FR to HR


Full Name The quality of HO from FR to HR

Abbreviation frhoquathr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

When the cell load reaches a certain level, handover from FR to HR


should be initiated, so as to get more channel resources and enhance
system capacity. However, the quality of the chosen FR call must meet a
certain requirement.
This parameter determines the quality threshold for initiating handover
from FR to HR.
The value of this parameter should be smaller than that of HrHoQuaThr
Description or AmrHrHoQuaThr.

Instance Cell

Value Range and Step 0..70

Unit N/A

Default Value 10

The voice quality must meet a certain requirement


Default Value after handover from FR to HR. Therefore, this parameter can be
Configuration Reason configured
to a relatively small value.

Configuration Rule and The lower the threshold, the higher the requirement
Adjustment Suggestion on quality.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters FRTHRHOSupport


AmrHrHoQuaThr
HrHoQuaThr

This parameter is valid only when the FRTHRHOSupport switch is


enabled in the cell.
Relationship
HrHoQuaThr>FrHoQuaThr
AmrHrHoQuaThr>FrHoQuaThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1053

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2.24.152 The quality of HO from HR(V1) to FR


Full Name The quality of HO from HR(V1) to FR

Abbreviation hrhoquathr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a quality threshold for initiating intra-cell HR


(V1)/FR handover. If the speech quality during an HR call is too poor,
an intra-cell HR (V1)/FR handover can be initiated although the other
handover conditions are not met.
Description This threshold must be greater than FrHoQuaThr.

Instance Cell

Value Range and Step 8..70

Unit N/A

Default Value 39

The voice quality is acceptable if it is higher


Default Value
than this threshold. If it is less than this threshold, handover should
Configuration Reason
be initiated to improve user experience.

The larger the HrHoQuaThr parameter is, the higher is the tolerbility for
the quality error bit rate of HR services, the smaller is the possibility of
Configuration Rule and initiating HR(V1)->FR quality handover.
Adjustment Suggestion The smaller the HrHoQuaThr parameter is, the lower is the tolerbility for
the quality error bit rate of HR services, the larger is the possibility of
initiating HR(V1)->FR quality handover.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters HRTFRHOSupport


FrHoQuaThr

2-1054

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is valid only when the FRTHRHOSupport switch is


Relationship enabled in the cell.
HrHoQuaThr>=FrHoQuaThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2.24.153 The quality of HO from HR(V3) to FR


Full Name The quality of HO from HR(V3) to FR

Abbreviation amrhrhoquathr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a quality threshold for initiating intra-cell HR


(V3)/FR handover. If the speech quality during an AMR HR call is too
poor, an intra-cell HR (V3)/FR handover can be initiated although the
other handover conditions are not met.
Description This threshold must be greater than FrHoQuaThr.

Instance Cell

Value Range and Step 8..70

Unit N/A

Default Value 39

The voice quality is acceptable if it is higher


Default Value
than this threshold. If it is less than this threshold, handover should
Configuration Reason
be initiated to improve user experience.

2-1055

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The larger the AmrHrHoQuaThr parameter is, the higher is the tolerbility
for the quality error bit rate of HR services, the smaller is the possibility
Configuration Rule and of initiating HR(V3)->FR quality handover.
Adjustment Suggestion The smaller the AmrHrHoQuaThr parameter is, the lower is the tolerbility
for the quality error bit rate of HR services, the larger is the possibility of
initiating HR(V4)->FR quality handover.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters HRTFRHOSupport


FrHoQuaThr

This parameter is valid only when the FRTHRHOSupport switch is


Relationship enabled in the cell.
AmrHrHoQuaThr>FrHoQuaThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2.24.154 P value of load and quality handover


Full Name P value of load and quality handover

Abbreviation loadandqualhop

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

For the handovers between FR and HR caused by load and quality


changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
This parameter value should be smaller than or equal to
Description LoadAndQualHoN.

Instance Cell

2-1056

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of


Configuration Rule and handover decision, handover is too frequent.
Adjustment Suggestion If the value is too large, it is very difficult to satisfy the condition of
handover decision.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters FRThrHoSupport,


LoadAndQualHoN

This parameter takes effect until the FR->HR switch based on load is
enabled.
Relationship
This parameter value should be smaller than or equal to
LoadAndQualHoN.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.155 N value of load and quality handover


Full Name N value of load and quality handover

Abbreviation loadandqualhon

Managed Object Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

2-1057

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

For the handovers between FR and HR caused by load and quality


changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
Description This parameter value should be larger than or equal to LoadAndQualHoP.

Instance Cell

Value Range and Step 1..21

Unit N/A

Default Value 4

Default Value It is recommended to set the default value


Configuration Reason to 4, so as to ensure the accuracy and rapidness of handover.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters FRThrHoSupport,


LoadAndQualHoP

This parameter takes effect until the FR->HR switch based on load is
Relationship enabled.
This parameter value should be larger than or equal to LoadAndQualHoP.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1058

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.156
Penalty time for handover caused
by interference
Penalty time for handover caused
Full Name by interference

Abbreviation InterfHoPenalTime

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the penalty time of the interference handover


in a cell, including the penalty for handover failure and continuous intra-
Description cell handovers.

Instance Cell

Value Range and Step 1..255

Unit N/A

Default Value 7

If the pre-processed measurement reports are


used for pre-processing, this parameter is configured to 7. In this
Default Value
case, the penalty time is long enough. If common measurement reports
Configuration Reason
are used, the value of this parameter should be configured to a larger
value.

Setting of this parameter should be in consideration of the pre-processing


Configuration Rule and period for measurement reports. If the value is too small, failure or invaid
Adjustment Suggestion handover is prone to occur continuously.
If the value is too large, intra-cell handover may not be performed timely.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-1059

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.24.157 Interference band requirement for intracell handover


caused by interference
Interference band requirement for intracell handover caused by interfer-
Full Name ence

Abbreviation InterfBandforHo

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum interference band required by


the intra-cell interference handover. If a channel does not meet this inter-
ference band (the value of interference band is not larger than the value
Description of this parameter), the intra-cell handover cannot be implemented.

Instance Cell

Value Range and Step 1..5

Unit N/A

Default Value 2

If the value of interference band is not larger


Default Value than 2, it indicates that the interference in this channel is small
Configuration Reason enough. In this case, the channel can be used for intra-cell interference
handover.

Usually, the value of this parameter is not


Configuration Rule and modified. If this parameter is configured to a large value, the handover
Adjustment Suggestion success rate will be affected. If this parameter is configured to
a small value, no channel is allocated during intra-cell handover.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1060

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.24.158 Prefer layer for traffic handover


Full Name Prefer layer for traffic handover

Abbreviation TrafficHoPreferLayer

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines the preferred layer during traffic handover.

Instance Cell

0:Preferred when the adjacent cell and the local cell are on the same
layer
1:Preferred when the adjacent cell is on the upper layer of the local cell
2:Preferred when the adjacent cell is on the lower layer of the local cell
3:Preferred when the adjacent cell is on an undefined layer
Value Range and Step 255:No preferred layer

Unit N/A

Default Value 255

Default Value The preferred layer and value are configured


Configuration Reason according to the network condition. By default, this function is disabled.

It is required to configure a preferred layer


during traffic handover according to the network condition. Usually,
Configuration Rule and
the system is prior to switch the traffic to the layer with low traffic.
Adjustment Suggestion
In most cases, the layer is a lower layer or same layer for absorbing
traffic.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1061

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.24.159 PBGT offset of prefer layer for traffic handover


Full Name PBGT offset of prefer layer for traffic handover

Abbreviation TrafficHoLayerOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the specific value for the preferred layer during
Description traffic handover.

Instance Cell

Value Range and Step 0..48

Unit dB

Default Value 24

Default Value The preferred layer and value are configured


Configuration Reason according to the network condition. By default, this function is disabled.

PBGT offset indicates the priority of the preferential layer. The larger
Configuration Rule and
the offset is, the easier is to queue up at the front. Whereas, the value
Adjustment Suggestion
should not be too large, to avoid handover to the cell with poor signal.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1062

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.24.160 Prefer band for traffic handover


Full Name Prefer band for traffic handover

Abbreviation TrafficHoPreferBand

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the preferred frequency band during traffic


Description handover.

Instance Cell

0: P-GSM Preferred
1: E-GSM Preferred
2: DCS1800 Preferred
4: GSM1900 Preferred
7: GSM850 Preferred
Value Range and Step 255: No Prefer

Unit N/A

Default Value 255

The preferred frequency band and value are


Default Value
configured according to the network condition. By default, this function
Configuration Reason
is disabled.

It is required to configure a preferred layer


during traffic handover according to the network condition. Usually,
Configuration Rule and
the system is prior to switch the traffic to the layer with low traffic.
Adjustment Suggestion
In most cases, the layer is a lower layer or same layer for absorbing
traffic.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

2-1063

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.24.161
PBGT offset of prefer band
for traffic handover
PBGT offset of prefer band
Full Name for traffic handover

Abbreviation TrafficHoBandOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the specific value for the preferred frequency
Description band during traffic handover.

Instance Cell

Value Range and Step 0..48

Unit Db

Default Value 24

The preferred frequency band and value are


Default Value
configured according to the network condition. By default, this function
Configuration Reason
is disabled.

PBGT offset indicates the priority of the preferential layer. The larger
Configuration Rule and
the offset is, the easier is to queue up at the front. Whereas, the value
Adjustment Suggestion
should not be too large, to avoid handover to the cell with poor signal.

Change Mode Offline

2-1064

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.24.162 The threshold for starting Downlink Rapid handover


Full Name The threshold for starting Downlink Rapid handover

Abbreviation DLRapidHoStartThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the threshold of TCH downlink level in the


case of rapid handover. Downlink level rapid handover is a new han-
dover algorithm for the high-speed railway scenario. In this scenario, it is
required to configure different offsets for high, medium, and low speeds to
adapt to rapid attenuation of the downlink level. In addition, handover is
Description only triggered between cells in the dedicated high-speed railway network.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

It is a functional parameter and is configured


Default Value
to 63 by default. Only when downlink rapid handover is enabled, the
Configuration Reason
system will implement handover judgment for adjacent cells.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to the network planning.

2-1065

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.163 High speed threshold


Full Name High speed threshold

Abbreviation HighSpeedThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a subscriber moves at high speed. If


the moving speed of a subscriber is larger than this threshold, the system
Description considers this scenario as a high-speed scenario.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 25

According to experienced values, the system


Default Value
considers a scenario as a high-speed scenario if the moving speed
Configuration Reason
of a subscriber is faster than 250 km/h.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

2-1066

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.164 Middle speed threshold


Full Name Middle speed threshold

Abbreviation MidSpeedThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether a subscriber moves at medium


speed. If the moving speed of a subscriber is larger than this threshold,
Description the system considers this scenario as a medium-speed scenario.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 15

According to experienced values, the system


Default Value
considers a scenario as a medium-speed scenario if the moving speed
Configuration Reason
of a subscriber is faster than 150 km/h.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1067

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.165 The minimum interval of direction handover


Full Name The minimum interval of direction handover

Abbreviation DirHoMinInterval

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

To prevent an MS, which is handed over to a cell during a previous


directional handover, from being immediately handed over to another cell
(usually occurring in boundary regions between two cells), the system
defines this parameter to avoid frequent handovers between cells and
impacts on communication quality and system performance.
This parameter specifies a time interval. An additional handover of an
MS is allowed only when the time since the previous handover is longer
than this interval. This parameter only influences inter-cell handovers. It
does not affect intra-cell handovers or intra-cell concentric handovers.
Description The default parameter value can be set to 5.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

2-1068

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.166 The ncell offset for downlink rapid handover


Full Name The ncell offset for downlink rapid handover

Abbreviation DLRapidHoNcellOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

The current scenario is a high-speed scenario or the last handover is a


handover with specific direction.
When the system performs sorting in the target cell, with this offset,
handover to the adjacent cell configured as a high-speed dedicated
Description network cell is easier.

Instance Cell

Value Range and Step 0..60

Unit N/A

Default Value 24

The meaning of 24 is the same as that of 0.


Default Value
This parameter is currently not used and will be configured in the
Configuration Reason
future according to network planning.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

2-1069

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.167 The offset of ncell in the same direction


Full Name The offset of ncell in the same direction

Abbreviation SameDirNcellOffset

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

The last handover is a handover with specific direction. When the system
performs sorting in the target cell, with this offset, handover to the target
Description cell with the same direction as that of the handover is easier.

Instance Cell

Value Range and Step 0..60

Unit N/A

Default Value 24

The meaning of 24 is the same as that of 0.


Default Value
This parameter is currently not used and will be configured in the
Configuration Reason
future according to network planning.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1070

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.168 Allow signal quality handover on TCH(High speed)


Full Name Allow signal quality handover on TCH(High speed)

Abbreviation BepHoControl_H

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on TCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters MeanBEPHoThs,MeanBEPHoP,Mean-


BEPHoN,CVBEPHoThs,CVBEPHoP,CVBEPHoN

Relationship None

Related Interfaces N/A

2-1071

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.169 Allow signal quality handover on TCH(Middle speed)


Full Name Allow signal quality handover on TCH(Middle speed)

Abbreviation BepHoControl_M

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on TCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters MeanBEPHoThs,MeanBEPHoP,Mean-


BEPHoN,CVBEPHoThs,CVBEPHoP,CVBEPHoN

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1072

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.170 Allow signal quality handover on TCH(Low speed)


Full Name Allow signal quality handover on TCH(Low speed)

Abbreviation BepHoControl_L

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on TCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters MeanBEPHoThs,MeanBEPHoP,Mean-


BEPHoN,CVBEPHoThs,CVBEPHoP,CVBEPHoN

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-1073

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.171 Handover Threshole of Mean Bit Error Probability on TCH


Full Name Handover Threshole of Mean Bit Error Probability on TCH

Abbreviation MeanBEPHoThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Threshole of Mean Bit Error Probability on TCH

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 9

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion Adjust in accordance with network environment

Change Mode Offline

Related features N/A

Related Parameters BepHoControl

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1074

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.172 Handover P Number of Mean Bit Error Probability on TCH


Full Name Handover P Number of Mean Bit Error Probability on TCH

Abbreviation MeanBEPHoP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover P Number of Mean Bit Error Probability on TCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters BepHoControl,MeanBEPHoN

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.173 Handover N Number of Mean Bit Error Probability on TCH


Full Name Handover N Number of Mean Bit Error Probability on TCH

Abbreviation MeanBEPHoN

Managed Object Handover Control

2-1075

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Handover N Number of Mean Bit Error Probability on TCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters BepHoControl,MeanBEPHoP

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.174 Handover Threshole of CV Bit Error Probability on TCH


Full Name Handover Threshole of CV Bit Error Probability on TCH

Abbreviation CVBEPHoThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Threshole of CV Bit Error Probability on TCH

Instance Cell

2-1076

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..7

Unit N/A

Default Value 4

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion Adjust in accordance with network environment

Change Mode Offline

Related features N/A

Related Parameters BepHoControl

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.175 Handover P Number of CV Bit Error Probability on TCH


Full Name Handover P Number of CV Bit Error Probability on TCH

Abbreviation CVBEPHoP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover P Number of CV Bit Error Probability on TCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

2-1077

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters BepHoControl,CVBEPHoN

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.176 Handover N Number of CV Bit Error Probability on TCH


Full Name Handover N Number of CV Bit Error Probability on TCH

Abbreviation CVBEPHoN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover N Number of CV Bit Error Probability on TCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

2-1078

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters BepHoControl,CVBEPHoP

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.177 If support intra-handover from FR to HR due to high load


Full Name If support intra-handover from FR to HR due to high load

Abbreviation frTHrHoSupport

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

It indicates if FR->HR handover based on load is supported, When the


load of a cell increases, handover can be applied to improve the utilization
Description ratio of the radio channel.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

When the cell needs to enable FR->HR handover, enable this switch.
Configuration Rule and
This function is able to improve the utilization of radio channels when
Adjustment Suggestion
the cell load is increased.

Change Mode Offline

2-1079

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2.24.178 If support intra-handover from HR to FR due to bad quality


Full Name If support intra-handover from HR to FR due to bad quality

Abbreviation hrTFrHoSupport

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to support HR-FR handover based


on quality. In the case of poor HR voice quality, the HR-FR handover can
Description be triggered to improve voice quality.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

When HR-FR handover is required for a cell,


Configuration Rule and enable this switch. Poor HR voice quality can be improved by the
Adjustment Suggestion handover
to FR channel.

Change Mode Offline

2-1080

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-03-02-013 Dynamic FR/HR Adjustment

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.614d

Parameter Modifying
Detail None

2.24.179 Is Dual-Frequency Traffic Handover Support


Full Name Is Dual-Frequency Traffic Handover Support

Abbreviation DualFreqHoSup

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to switch to the dual-frequency traffic


Description mode.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The switch is disabled normally.

Configuration Rule and Enable this switch if related cells associated with the dual-frequency
Adjustment Suggestion network are configured and these cells are used to absorb traffic.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1081

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.180 Dual-Frequency Handover Parameter N


Full Name Dual-Frequency Handover Parameter N

Abbreviation DualFreqHoN

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the N value for a dual-frequency network handover.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 3

Default Value
Configuration Reason To ensure the handover stability and reliability

Configuration Rule and


Adjustment Suggestion Set a lower value to quicken the decision making process.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1082

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.181 Dual-Frequency Handover Parameter P


Full Name Dual-Frequency Handover Parameter P

Abbreviation DualFreqHoP

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the P value for a dual-frequency handover.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 2

Default Value
Configuration Reason To ensure the handover stability and reliability

Configuration Rule and


Adjustment Suggestion Set a lower value to quicken the decision making process.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

2-1083

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.182 Dual-Frequency Handover TA Threshold


Full Name Dual-Frequency Handover TA Threshold

Abbreviation DualFreqHoTAThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the threshold of dual-frequency handover TA.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

Default Value Normally, the related cell in the dual-frequency network has a similar
Configuration Reason coverage with the local cell.

Configuration Rule and Set a lower value if the coverage of the related cell is smaller than the
Adjustment Suggestion local cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1084

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.24.183 Dual-Frequency Handover RxLevel Threshold


Full Name Dual-Frequency Handover RxLevel Threshold

Abbreviation DualFreqHoDLThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the threshold of dual-frequency handover level.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 30

Default Value
Configuration Reason The level to ensure proper operation of a cell

Configuration Rule and Set a higher threshold if the QoS is not improved after the handover to
Adjustment Suggestion sub-cell 1.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.184 Circuit data handover control


Full Name Circuit data handover control

Abbreviation CSDATAHOControl

Managed Object Handover Control

2-1085

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether handover is allowed for CS data traf-


Description fic.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason Handover is allowed normally.

Configuration Rule and


Adjustment Suggestion Disable this parameter if CS data services are affected by the handover.

Change Mode Offline

Related features N/A

Related Parameters vsDataGBssFunction.CSDATAHOControl

Relationship Handover can be done only if

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.185 Back to Source Cell when PBGT Handover


Full Name Back to Source Cell when PBGT Handover

Abbreviation PBGTHoBacktoSource

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1086

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

For a PBGT handover, this parameter determines whether only levels


meeting the requirement are allowed for HO Access. If the level does
not meet the requirement, the system does not send a PHY Info mes-
sage, and sends the handover failure message for the MS to return to the
Description source channel.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Not supported by default

Configuration Rule and


Adjustment Suggestion Enable this parameter when required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.186
Back to Source Cell when Other
Handover
Back to Source Cell when Other
Full Name Handover

Abbreviation OtherHoBacktoSource

2-1087

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

For non-PBGT handovers, this parameter determines whether only levels


meeting the requirement are allowed for HO Access. If the level does not
meet the requirement, the system does not send the PHY Info, and sends
Description the handover failure message for the MS to return to the source channel.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Not supported by default

Configuration Rule and


Adjustment Suggestion Enable this parameter when required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.187 HoAccess Require Rxlevel offset


Full Name HoAccess Require Rxlevel offset

Abbreviation HoAccessReqLevOffset

Managed Object Handover Control

2-1088

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter sets the offset for calculating the level required for han-
dover access. The calculation formula is 110- TargetAverageRxLevel +
Description LinkBalance + (HoAccessReqLevOffset -35).

Instance Cell

Value Range and Step 0..70

Unit N/A

Default Value 45

Default Value
Configuration Reason Default: 10 db

Configuration Rule and


Adjustment Suggestion Set a greater value if a lower handover detection level is required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.188
HoAccess Require Rxlevel Select
Strategy when Other Handover
HoAccess Require Rxlevel Select
Full Name Strategy when Other Handover

Abbreviation OtherHoAccessLevSel

2-1089

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

For non-PBGT handovers, this parameter sets the strategy used for se-
lecting the levels required by handover access. The minimum receiv-
ing level or (110- TargetAverageRxLevel + LinkBalance + (HoAccessRe-
Description qLevOffset -35)) can be selected.

Instance Cell

1:Expected uplink level


Value Range and Step 2:Minimum allowed access level

Unit N/A

Default Value 1

Default Value
Configuration Reason Default: strategy 1

Configuration Rule and


Adjustment Suggestion Use strategy 2 if strategy 1 leads to deteriorated SD indexes.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.189 Dual-Frequency Traffic Handover Threshold


Full Name Dual-Frequency Traffic Handover Threshold

Abbreviation DualFreqOverLoadThs

Managed Object Handover Control

2-1090

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

If related cells are configured, when the cell load is greater than the pa-
rameter value and the related cell is lower than the parameter value, the
Description system makes a dual-frequency traffic handover decision.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason Empirical value

Configuration Rule and Set a higher threshold if better level is expected after handover to the
Adjustment Suggestion related cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.190 Support handover from HR to FR due to low load


Full Name Support handover from HR to FR due to low load

Abbreviation HRTFRHOSupport2

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1091

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Enables/Disables the HR-FR handover function (HR includes HR (v1) and


Description HR (V3)).

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally this function is disabled.

Configuration Rule and A HR-FR handover can be enabled to improve the conversation quality
Adjustment Suggestion when the load of a cell is lowered.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

V1
2.24.191 The load of HO from HR to FR
Full Name The load of HO from HRV1 to FR

Abbreviation HrToFrHoLoadThr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

Description Load (low threshold) of a cell that triggers an HR (V1)-FR handover.

Instance Cell

2-1092

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..100

Unit %

Default Value 30

The parameter value is determined by the user experience and the load
Default Value
on a channel. For example, if the load on a channel is lower than 30, the
Configuration Reason
full rate mode can be applied to improve the user experience.

After a handover to the FR mode, the load on the current channel is


increased, and it is possible to reach the load threshold triggering a
Configuration Rule and
handover to the dynamic HR mode. This parameter must be set to a
Adjustment Suggestion
value that can not only improve the user experience, but also avoid
frequent handovers.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters AmrHrToFrHoLoadThr

In the same cell, AmrHRThs >HrToFrHoLoadThr>= AmrHrToFrHoLoad-


Relationship Thr
FrToHrHoLoadThr> HrToFrHoLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

V3
2.24.192 The load of HO from HR to FR
Full Name The load of HO from HRV3 to FR

Abbreviation AmrHrToFrHoLoadThr

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

Description Load (low threshold) of a cell that triggers an HR (V3)-FR handover.

2-1093

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

The parameter value is determined by the user experience and the load
Default Value
on a channel. For example, if the load on a channel is lower than 20, the
Configuration Reason
AMR full rate mode can be applied to improve the user experience.

After a handover to the AMR FR mode, the load on the current channel
is increased, and it is possible to reach the load threshold triggering a
Configuration Rule and
handover to the dynamic HR mode. This parameter must be set to a
Adjustment Suggestion
value that can not only improve the user experience, but also avoid
frequent handovers.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters HrToFrHoLoadThr

In the same cell, AmrHRThs >HrToFrHoLoadThr>= AmrHrToFrHoLoad-


Relationship Thr
FrToAmrHrHoLoadThr> AmrHrToFrHoLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.193 HR to FR handover downlink level start threshold


Full Name HR to FR handover downlink level start threshold

Abbreviation HrToFrHoStartThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1094

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Description Electricity level threshold that triggers an HR-FR handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The default value is set in accordance with the past experience.

Configuration Rule and The HR-FR handover is unlikelier to be performed if the parameter value
Adjustment Suggestion is higher, and vice versa.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoDlLevP <= HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.194 FR to HR handover downlink level start threshold


Full Name FR to HR handover downlink level start threshold

Abbreviation FrToHrHoStartThs

Managed Object Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

Description Electricity level threshold that triggers an FR-HR handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

2-1095

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 35

Default Value
Configuration Reason The default value is set in accordance with the past experience.

Configuration Rule and The FR-HR handover is unlikelier to be performed if the parameter value
Adjustment Suggestion is higher, and vice versa.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship HoUlQualP <= HoUlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.195 Back to Source Cell when MSC Controlled Incoming


Handover
Full Name Back to Source Cell when MSC Controlled Incoming Handover

Abbreviation MSCHoInHoBack2Source

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Enables/Disables the back-to-source-cell function when TCH incoming


Description handover is performed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-1096

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value This function is enabled to when the call drop rate is high at he field. By
Configuration Reason default this parameter is set to 0.

This function is enabled when the call drop rate at the field is high.
During the process of handover in from the external, the source cell
Configuration Rule and
is not informed when an MS is handed-over back to its source cell,
Adjustment Suggestion
therefore, the handover indexes of the source cell may be affected.
Generally back-to-source-cell function is recommended to be disabled.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.24.196 Good level and bad quality handover DL Level


Full Name Good level and bad quality handover DL Level

Abbreviation GoodLevBadRQHoDLLev

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

The system triggers the high level and bad quality handover when the down-
Description link level of this cell is higher than the value of this parameter.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 30

2-1097

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value By default, the handover due to good level and bad quality is determined
Configuration Reason when the downlink level of this cell is higher than -80 dB.

When it is difficult to initiate a handover due to good level and bad quality,
Configuration Rule and
decrease the threshold. After enabling this function, pay attention to the
Adjustment Suggestion
call drop rate. If the call drop rate deteriorates, increase the threshold.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.197 HoAccess Require CI


Full Name HoAccess Require CI

Abbreviation HoAccessReqCI

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

Description CI ratio required for handover detection

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 12

Default Value According to the lab data, demodulated signals of NB are bad when the
Configuration Reason receive signals CI is smaller than 12.

Configuration Rule and Enable the handover bounce scenario as required. Set a proper CI
Adjustment Suggestion threshold according to that of the actual frequency point used for testing.

2-1098

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.24.198 Good level and bad quality handover enable


Full Name Good level and bad quality handover enable

Abbreviation GoodLevBadRQHoEnable

Managed Object Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether this cell supports good level and bad
quality handover. If the bad quality handover is determined successfully
but there is not a candidate cell, the system determines whether to enable
Description the high level and bad quality handover.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the handover due to good level and bad quality is disabled.

2-1099

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to the DT data, this function can be enabled if call drop


frequently occurs in TCH channels due to good level and bad quality. After
Configuration Rule and
enabling this function, pay attention to the call drop rate. If the call drop rate
Adjustment Suggestion
deteriorates, disable this function or modify the "GoodLevBadRQoffSet" or
"GoodLevBadRQHoDLLev" parameter.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25 SDCCH Handover Control(GSdHandoverControl)


2.25.1 SDCCH Handover Control ID
Full Name SDCCH Handover Control ID

Abbreviation GSdHandoverControl

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description SDCCH Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

2-1100

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.2 Allow Distance SDCCH handover(High Speed)


Full Name Allow Distance SDCCH handover(High Speed)

Abbreviation sdhoControlDis_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Distance SDCCH handover(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Algorithm for special applications

This parameter is used when extended cell exists in wide coverage


Configuration Rule and
situation. Handover can be applied between an ordinary cell and an
Adjustment Suggestion
extended cell.

2-1101

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.3 Allow PBGT SDCCH handover(High Speed)


Full Name Allow PBGT SDCCH handover(High Speed)

Abbreviation sdhoControlPbgt_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow PBGT SDCCH handover(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason SDCCH handover is used only in an emergency.

2-1102

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Generally speaking, handover triggered by PBGT is enabled. Under


some special circumstances the function is disabled.
The PBGTHOLAYER parameter and hierarchical parameters can be
used together for PBGT handover.
Configuration Rule and
PBGT level parameter and hierarchical parameters can be used together
Adjustment Suggestion
to delay the PBGT handover. The PBGT handover is conducted in a
same level as much as possible.
PBGT handover helps to improve the success ratio of handover, call
drop ratio and coverage ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.4 Allow rapid SDCCH handover(High Speed)


Full Name Allow rapid SDCCH handover(High Speed)

Abbreviation sdhoControlRapid_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow rapid SDCCH handover(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

2-1103

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Algorithm for special applications

The uplink rapid fading handover is applied on MS with fast moving


speed, definite direction and fast fading caused by blocks. If this function
Configuration Rule and is enabled, some neighbor cells need to be configured for fast fading
Adjustment Suggestion handover.
Then the call drop ratio and coverage ratio can be improved under
special circumstances.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.5 Allow quality SDCCH handover in uplink(High Speed)


Full Name Allow quality SDCCH handover in uplink(High Speed)

Abbreviation sdhoControlQuaUl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality SDCCH handover in uplink(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

2-1104

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Universal Handover Algorithm

It is recommended to enable the handover triggered by uplink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.6 Allow level SDCCH handover in uplink(High Speed)


Full Name Allow level SDCCH handover in uplink(High Speed)

Abbreviation sdhoControlLevUl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level SDCCH handover in uplink(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1105

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to disable the rescue handover triggered by uplink


level. For the fast-moving and wide coverage situation, it is better to
Configuration Rule and enable this function, and the corresponding threshold value needs to
Adjustment Suggestion be modified.
This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.7 Allow quality SDCCH handover in downlink(High Speed)


Full Name Allow quality SDCCH handover in downlink(High Speed)

Abbreviation sdhoControlQuaDl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality SDCCH handover in downlink(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1106

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.8 Allow level SDCCH handover in downlink(High Speed)


Full Name Allow level SDCCH handover in downlink(High Speed)

Abbreviation sdhoControlLevDl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level SDCCH handover in downlink(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1107

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.9 Downlink rapid SDCCH handover enable(High Speed)


Full Name Downlink rapid SDCCH handover enable(High Speed)

Abbreviation sdhoControlRapidDl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink rapid SDCCH handover enable(High Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is disabled by default.

The rapid level handover for adjacent cells


Configuration Rule and
is usually applied in special scenarios, for example, high-speed railway
Adjustment Suggestion
scenario.

2-1108

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.10 Downlink rapid quality drop THS(High Speed)


Full Name Downlink rapid quality drop THS(High Speed)

Abbreviation sdhoControlRQuaDl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on SDCCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in high-speed scenarios. This algorithm uses
the raw measurement data of downlink quality, applies no window
for neighbor cells, and shares the N value used for other handover
decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

2-1109

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is enabled when the serving


Default Value
cell has poor downlink transmission quality and supports handover
Configuration Reason
on SDCCH.

This parameter is enabled when the serving


Configuration Rule and
cell has poor downlink transmission quality and supports handover
Adjustment Suggestion
on SDCCH.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

This parameter takes effect when the system


Relationship
support SDCCH handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.11 Allow Distance SDCCH handover(Middle Speed)


Full Name Allow Distance SDCCH handover(Middle Speed)

Abbreviation sdhoControlDis_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow Distance SDCCH handover(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Algorithm for special applications

2-1110

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used when extended cell exists in wide coverage


Configuration Rule and
situation. Handover can be applied between an ordinary cell and an
Adjustment Suggestion
extended cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.12 Allow PBGT SDCCH handover(Middle Speed)


Full Name Allow PBGT SDCCH handover(Middle Speed)

Abbreviation sdhoControlPbgt_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow PBGT SDCCH handover(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason SDCCH handover is used only in an emergency.

2-1111

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally speaking, handover triggered by PBGT is enabled. Under


some special circumstances the function is disabled.
The PBGTHOLAYER parameter and hierarchical parameters can be
used together for PBGT handover.
Configuration Rule and
PBGT level parameter and hierarchical parameters can be used together
Adjustment Suggestion
to delay the PBGT handover. The PBGT handover is conducted in a
same level as much as possible.
PBGT handover helps to improve the success ratio of handover, call
drop ratio and coverage ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.13 Allow rapid SDCCH handover(Middle Speed)


Full Name Allow rapid SDCCH handover(Middle Speed)

Abbreviation sdhoControlRapid_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow rapid SDCCH handover(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

2-1112

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Algorithm for special applications

The uplink rapid fading handover is applied on MS with fast moving


speed, definite direction and fast fading caused by blocks. If this function
Configuration Rule and is enabled, some neighbor cells need to be configured for fast fading
Adjustment Suggestion handover.
Then the call drop ratio and coverage ratio can be improved under
special circumstances.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.14 Allow quality SDCCH handover in uplink(Middle Speed)


Full Name Allow quality SDCCH handover in uplink(Middle Speed)

Abbreviation sdhoControlQuaUl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality SDCCH handover in uplink(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

2-1113

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Universal Handover Algorithm

It is recommended to enable the handover triggered by uplink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.15 Allow level SDCCH handover in uplink(Middle Speed)


Full Name Allow level SDCCH handover in uplink(Middle Speed)

Abbreviation sdhoControlLevUl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level SDCCH handover in uplink(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1114

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It is recommended to disable the rescue handover triggered by uplink


level. For the fast-moving and wide coverage situation, it is better to
Configuration Rule and enable this function, and the corresponding threshold value needs to
Adjustment Suggestion be modified.
This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.16 Allow quality SDCCH handover in downlink(Middle Speed)


Full Name Allow quality SDCCH handover in downlink(Middle Speed)

Abbreviation sdhoControlQuaDl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow quality SDCCH handover in downlink(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1115

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.17 Allow level SDCCH handover in downlink(Middle Speed)


Full Name Allow level SDCCH handover in downlink(Middle Speed)

Abbreviation sdhoControlLevDl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow level SDCCH handover in downlink(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1116

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.18 Downlink rapid SDCCH handover enable(Middle Speed)


Full Name Downlink rapid SDCCH handover enable(Middle Speed)

Abbreviation sdhoControlRapidDl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink rapid SDCCH handover enable(Middle Speed)

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is disabled by default.

The rapid level handover for adjacent cells


Configuration Rule and
is usually applied in special scenarios, for example, high-speed railway
Adjustment Suggestion
scenario.

2-1117

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.19 Downlink rapid quality drop THS(Middle Speed)


Full Name Downlink rapid quality drop THS(Middle Speed)

Abbreviation sdhoControlRQuaDl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on SDCCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in intermediate-speed scenarios. This algorithm
uses the raw measurement data of downlink quality, applies no window
for neighbor cells, and shares the N value used for other handover
decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

2-1118

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is enabled when the serving


Default Value
cell has poor downlink transmission quality and supports handover
Configuration Reason
on SDCCH.

This parameter is enabled when the serving


Configuration Rule and
cell has poor downlink transmission quality and supports handover
Adjustment Suggestion
on SDCCH.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

This parameter takes effect when the system


Relationship
support SDCCH handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.20 Allow SDCCH handover


Full Name Allow SDCCH handover

Abbreviation sdhoControl

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines if SDCCH handover is allowed.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value There is few handover applications on SDCCH.


Configuration Reason This function can be enabled if needed.

2-1119

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This function is usually applied in the area


Configuration Rule and with high MS moving speed or with small coverage. The SDCCH
Adjustment Suggestion handover
can be enabled to avoid call setup failure.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.21 Allow Distance SDCCH handover(Low Speed)


Full Name Allow Distance SDCCH handover(Low Speed)

Abbreviation sdhoControlDis_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

Description This parameter determines whether to allow standard PBGT handover.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Algorithm for special applications

This parameter is used when extended cell exists in wide coverage


Configuration Rule and
situation. Handover can be applied between an ordinary cell and an
Adjustment Suggestion
extended cell.

2-1120

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.22 Allow PBGT SDCCH handover(Low Speed)


Full Name Allow PBGT SDCCH handover(Low Speed)

Abbreviation sdhoControlPbgt_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

Description This parameter determines whether to allow handover due to distance.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason SDCCH handover is used only in an emergency.

2-1121

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Generally speaking, handover triggered by PBGT is enabled. Under


some special circumstances the function is disabled.
The PBGTHOLAYER parameter and hierarchical parameters can be
used together for PBGT handover.
Configuration Rule and
PBGT level parameter and hierarchical parameters can be used together
Adjustment Suggestion
to delay the PBGT handover. The PBGT handover is conducted in a
same level as much as possible.
PBGT handover helps to improve the success ratio of handover, call
drop ratio and coverage ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.23 Allow dynamic adjustment of SDCCH handover priority


Full Name Allow dynamic adjustment of SDCCH handover priority

Abbreviation sdhoControlDynPrio

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to allow dynamic adjustment of


handover priority.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

2-1122

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function can optimize the traffic distribution.
Adjustment Suggestion The function is recommended to be enabled in the area with busy traffic.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.24 Allow rapid SDCCH handover(Low Speed)


Full Name Allow rapid SDCCH handover(Low Speed)

Abbreviation sdhoControlRapid_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

This parameter determines whether to allow rapid handover.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Algorithm for special applications

2-1123

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The uplink rapid fading handover is applied on MS with fast moving


speed, definite direction and fast fading caused by blocks. If this function
Configuration Rule and is enabled, some neighbor cells need to be configured for fast fading
Adjustment Suggestion handover.
Then the call drop ratio and coverage ratio can be improved under
special circumstances.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.25 Allow quality SDCCH handover in uplink(Low Speed)


Full Name Allow quality SDCCH handover in uplink(Low Speed)

Abbreviation sdhoControlQuaUl_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

This parameter describes whether quality handover in uplink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1124

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

It is recommended to enable the handover triggered by uplink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.26 Allow level SDCCH handover in uplink(Low Speed)


Full Name Allow level SDCCH handover in uplink(Low Speed)

Abbreviation sdhoControlLevUl_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

This parameter describes whether level handover in uplink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1125

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to disable the rescue handover triggered by uplink


level. For the fast-moving and wide coverage situation, it is better to
Configuration Rule and enable this function, and the corresponding threshold value needs to
Adjustment Suggestion be modified.
This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.27 Allow quality SDCCH handover in downlink(Low Speed)


Full Name Allow quality SDCCH handover in downlink(Low Speed)

Abbreviation sdhoControlQuaDl_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

This parameter describes whether quality handover in downlink is


allowed.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

2-1126

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Universal Handover Algorithm

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.28 Allow level SDCCH handover in downlink(Low Speed)


Full Name Allow level SDCCH handover in downlink(Low Speed)

Abbreviation sdhoControlLevDl_L

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

This parameter describes whether level handover in downlink is allowed.


Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason Universal Handover Algorithm

2-1127

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to enable the handover triggered by downlink


Configuration Rule and transmission quality to avoid voice problem or call drops.
Adjustment Suggestion This function will result in frequent handover, but will help to lower the
call drop ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.29 Downlink rapid SDCCH handover enable(Low Speed)


Full Name Downlink rapid SDCCH handover enable(Low Speed)

Abbreviation sdhoControlRapidDl_L

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to enable SDCCH downlink rapid


handover.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is disabled by default.

2-1128

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

SDCCH handover//The handover to a neighbor


Configuration Rule and
cell triggered by high moving speed is usually conducted on a high-speed
Adjustment Suggestion
railway.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.30 Downlink rapid quality drop THS(Low Speed)


Full Name Downlink rapid quality drop THS(Low Speed)

Abbreviation sdhoControlRQuaDl_L

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on SDCCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in low-speed scenarios. This algorithm uses the raw
measurement data of downlink quality, applies no window for neighbor
cells, and shares the N value used for other handover decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

Value Range and Step 0..1

2-1129

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

This parameter is enabled when the serving


Default Value
cell has poor downlink transmission quality and supports handover
Configuration Reason
on SDCCH.

This parameter is enabled when the serving


Configuration Rule and
cell has poor downlink transmission quality and supports handover
Adjustment Suggestion
on SDCCH.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

This parameter takes effect when the system


Relationship
support SDCCH handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.31 Perform PBGT SDCCH handover by Directed retry(Low


Speed)
Full Name Perform PBGT SDCCH handover by Directed retry(Low Speed)

Abbreviation sdhoControlPbgtDr

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1130

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether rapid handover due to downlink quality


is allowed. It is used for handover on SDCCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in low-speed scenarios. This algorithm uses the raw
measurement data of downlink quality, applies no window for neighbor
cells, and shares the N value used for other handover decisions.
The rapid handover due to downlink quality has the lowest priority than
Description the other supported handover types.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason experience value

"Yes" means when SDCCH handover is conducted,


Configuration Rule and
MS is redirected to the TCH channel of a better cell to reduce the
Adjustment Suggestion
call drop ratio.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.32 Uplink power level Sample count


Full Name Uplink power level Sample count

2-1131

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation hoUlLevWindow

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter is the window size (number of sample values) used to
Description calculate average value of uplink signal intensity.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value
Configuration Reason EXP

Average window value:


Big window value requires more measurement reports for the first
average calculation. The impact of signal fluctuation can be avoided, but
the handover will be delayed. Therefore the handover success ratio, call
Configuration Rule and
drop ratio and the coverage ratio will be affected.
Adjustment Suggestion
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
drop ratio and the coverage ratio will be affected.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

2-1132

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.25.33 Downlink power level Sample count


Full Name Downlink power level Sample count

Abbreviation hoDlLevWindow

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

In the GSM system, BSC makes SDCCH handover decision according


to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
This parameter represents the window size (i.e. the number of sample
values) used to calculate the average value of downlink signal intensity.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The parameter value can be set high to get


rid of the impact caused by the incorrect measured value. But if the
Configuration Rule and value is too high, the decision will not be made in time. Possibly
Adjustment Suggestion there will not be enough time for measurement because data
transmission
on SDCCH will not last long.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1133

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.34 Uplink quality Sample count


Full Name Uplink quality Sample count

Abbreviation hoUlQualWindow

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
Description used to calculate average value of uplink signal quality.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value
Configuration Reason EXP

Average window value:


Big window value requires more measurement reports for the first
average calculation. The impact of signal fluctuation can be avoided, but
the handover will be delayed. Therefore the handover success ratio, call
Configuration Rule and
drop ratio and the coverage ratio will be affected.
Adjustment Suggestion
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
drop ratio and the coverage ratio will be affected.

2-1134

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.35 Downlink quality Sample count


Full Name Downlink quality Sample count

Abbreviation hoDlQualWindow

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

In the GSM system, BSC makes SDCCH handover decision according


to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
This parameter represents the window size (i.e. the number of sample
values) used to calculate the average value of downlink signal quality.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

2-1135

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The parameter value can be set high to get


rid of the impact caused by the incorrect measured value. But if the
Configuration Rule and value is too high, the decision will not be made in time. Possibly
Adjustment Suggestion there will not be enough time for measurement because data
transmission
on SDCCH will not last long.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.36 Distance
Full Name Distance

Abbreviation distanceWindow

Managed Object SDCCH Handover Control

3GPP Name Hreqave

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes SDCCH handover decision according


to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of distance (timing advance) between
Description MS and BTS.

Instance Cell

2-1136

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..20

Unit N/A

Default Value 1

MS data transmission time on SDCCH is short,


Default Value
so the window value should be small compared with TCH, otherwise the
Configuration Reason
handover decision will not be made in time.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

This parameter takes effect when the system


Relationship
support SDCCH handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.37 Neighboring cell


Full Name Neighboring cell

Abbreviation ncellWindow

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

2-1137

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
Description used to calculate average value of signal intensity for adjacent cells.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value
Configuration Reason EXP

Average window value:


Big window value requires more measurement reports for the first
average calculation. The impact of signal fluctuation can be avoided, but
the handover will be delayed. Therefore the handover success ratio, call
Configuration Rule and
drop ratio and the coverage ratio will be affected.
Adjustment Suggestion
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
drop ratio and the coverage ratio will be affected.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1138

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.25.38 Number of zero allowed in AV


Full Name Number of zero allowed in AV

Abbreviation zeroAllowed

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, MS can report to BSS the


measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell .
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description (NCellWindow - the count of 0s).

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 1

Default Value Usually with general window value and N value,


Configuration Reason one null value can be accepted.

The counterpart has more endurance of unsteadiness


Configuration Rule and during measurement if the parameter gets a bigger value. The parameter
Adjustment Suggestion value can be adjusted bigger when there are more neighbor cells or
more interference with the radio environment.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

2-1139

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.39 Uplink receive level Threshold


Full Name Uplink receive level Threshold

Abbreviation hoUlLevThs

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving strength is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal strength is lower than the
uplink receiving level threshold, perform handover to improve the uplink
signal strength.
This parameter (HoUlLevThs) defines the related threhold value.
Usually, the value of "HoUlLevThs" should be less than the threshold for
uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover. This parameter can
be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

2-1140

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0:< -110dBm
1:-110~-109 dBm
2:-109~-108dBm
3:-108~-107dBm
4:-107~-106dBm
5:-106~-105dBm
6:-105~-104dBm
7:-104~-103dBm
8:-103~-102dBm
9:-102~-101dBm
10:-101~-100dBm
11:-100~-99dBm
12:-99~-98dBm
13:-98~-97dBm
14:-97~-96dBm
15:-96~-95dBm
16:-95~-94dBm
17:-94~-93dBm
18:-93~-92dBm
19:-92~-91dBm
20:-91~-90dBm
21:-90~-89dBm
22:-89~-88dBm
23:-88~-87dBm
24:-87~-86dBm
25:-86~-85dBm
26:-85~-84dBm
27:-84~-83dBm
28:-83~-82dBm
29:-82~-81dBm
30:-81~-80dBm
31:-80~-79dBm
32:-79~-78dBm
33:-78~-77dBm
34:-77~-76dBm
35:-76~-75dBm
36:-75~-74dBm
37:-74~-73dBm
38:-73~-72dBm
39:-72~-71dBm
40:-71~-70dBm
41:-70~-69dBm
42:-69~-68dBm
Value Range and Step
43:-68~-67dBm

2-1141

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

44:-67~-66dBm
45:-66~-65dBm
46:-65~-64dBm
47:-64~-63dBm
48:-63~-62dBm
49:-62~-61dBm
50:-61~-60dBm
51:-60~-59dBm
52:-59~-58dBm
53:-58~-57dBm
54:-57~-56dBm
55:-56~-55dBm
56:-55~-54dBm
57:-54~-53dBm
58:-53~-52dBm
59:-52~-51dBm
60:-51~-50dBm
61:-50~-49dBm
62:-49~-48dBm
63:> -48dBm

Unit N/A

Default Value 7

Default Value Usually, -95 dbm is considered as the demarcation


Configuration Reason point between the good uplink level and poor uplink level.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlLevThs < PcDlInclLevThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

2-1142

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.25.40 Downlink receive level Threshold


Full Name Downlink receive level Threshold

Abbreviation hoDlLevThs

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving strength is
one of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal strength is lower than
the downlink receiving level threshold, perform handover to improve the
downlink signal strength.
This parameter (HoDlLevThs) defines the related threhold value.
Usually, the value of "HoDlLevThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover. This
parameter can be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoDlLevN parameter defines the related N value. The HoDlLevP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

0:< -110dBm
1:-110 .. -109 dBm
2:-109 .. -108dBm
3:-108 .. -107dBm
4:-107 .. -106dBm
5:-106 .. -105dBm
6:-105 .. -104dBm
7:-104 .. -103dBm
8:-103 .. -102dBm
9:-102 .. -101dBm
10:-101 .. -100dBm
11:-100 .. -99dBm
12:-99 .. -98dBm
13:-98 .. -97dBm
14:-97 .. -96dBm
Value Range and Step
15:-96 .. -95dBm

2-1143

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

16:-95 .. -94dBm
17:-94 .. -93dBm
18:-93 .. -92dBm
19:-92 .. -91dBm
20:-91 .. -90dBm
21:-90 .. -89dBm
22:-89 .. -88dBm
23:-88 .. -87dBm
24:-87 .. -86dBm
25:-86 .. -85dBm
26:-85 .. -84dBm
27:-84 .. -83dBm
28:-83 .. -82dBm
29:-82 .. -81dBm
30:-81 .. -80dBm
31:-80 .. -79dBm
32:-79 .. -78dBm
33:-78 .. -77dBm
34:-77 .. -76dBm
35:-76 .. -75dBm
36:-75 .. -74dBm
37:-74 .. -73dBm
38:-73 .. -72dBm
39:-72 .. -71dBm
40:-71 .. -70dBm
41:-70 .. -69dBm
42:-69 .. -68dBm
43:-68 .. -67dBm
44:-67 .. -66dBm
45:-66 .. -65dBm
46:-65 .. -64dBm
47:-64 .. -63dBm
48:-63 .. -62dBm
49:-62 .. -61dBm
50:-61 .. -60dBm
51:-60 .. -59dBm
52:-59 .. -58dBm
53:-58 .. -57dBm
54:-57 .. -56dBm
55:-56 .. -55dBm
56:-55 .. -54dBm
57:-54 .. -53dBm
58:-53 .. -52dBm
59:-52 .. -51dBm

2-1144

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

60:-51 .. -50dBm
61:-50 .. -49dBm
62:-49 .. -48dBm
63:> -48dBm

Unit N/A

Default Value 18

Default Value Usually, -95 dbm is considered as the demarcation


Configuration Reason point between the good uplink level and poor uplink level.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlLevThs < PcDlInclLevThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.41 Uplink receive quality Threshold


Full Name Uplink receive quality Threshold

Abbreviation hoUlQualThs

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1145

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving quality is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal quality is lower than the
uplink receiving quality threshold, perform handover to improve the
uplink signal quality.
This parameter (HoUlQualThs) defines the related threhold value.
Usually, the value of "HoUlQualThs" should be lower than the threshold
for uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover.
The HoUlQualN parameter defines the related N value. The HoUlQualP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

9: R<0.2%
19: BER<0.4%
29: 0.4%<BER<0.8%
39: 0.8%<BER<1.6%
49: 1.6%<BER<3.2%
59: 3.2%<BER<6.4%
69: 6.4%<BER<12.8%
Value Range and Step 70: 12.8%<BER

Unit N/A

Default Value 39

Default Value Generally, the quality is considered as poor


Configuration Reason when its level is above 49.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualThs > PcDlInclQualThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1146

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.42 Downlink receive quality Threshold


Full Name Downlink receive quality Threshold

Abbreviation HoDlQualThs

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving quality is one
of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal quality is lower than
the downlink receiving quality threshold, perform handover to improve
the downlink signal quality.
This parameter (HoDlQualThs) defines the related threhold value.
Usually, the value of "HoDlQualThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover.
The HoDlQualN parameter defines the related N value. The HoDlQualP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

9: R<0.2%
19: BER<0.4%
29: 0.4%<BER<0.8%
39: 0.8%<BER<1.6%
49: 1.6%<BER<3.2%
59: 3.2%<BER<6.4%
69: 6.4%<BER<12.8%
Value Range and Step 70: 12.8%<BER

Unit N/A

Default Value 39

2-1147

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Generally, the quality is considered as poor


Configuration Reason when its level is above 49.

The value the larger is, the handover is more


Configuration Rule and unlikely to occur, and vice versa the handover is easier to occur.If
Adjustment Suggestion the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualThs > PcDlInclQualThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.43 Uplink receive level Value P


Full Name Uplink receive level Value P

Abbreviation hoUlLevP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving strength is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal strength is lower than the
uplink receiving level threshold, perform handover to improve the uplink
signal strength.
This parameter (HoUlLevThs) defines the related threhold value.
Usually, the value of "HoUlLevThs" should be lower than the threshold

Description for uplink power control (increase). That is, perform power control first. If

2-1148

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

power control does not function, perform handover. This parameter can
be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value.
This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.44 Uplink receive level Value N


Full Name Uplink receive level Value N

Abbreviation hoUlLevN

Managed Object SDCCH Handover Control

3GPP Name N/A

2-1149

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving strength is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal strength is lower than the
uplink receiving level threshold, perform handover to improve the uplink
signal strength.
This parameter (HoUlLevThs) defines the related threhold value.
Usually, the value of "HoUlLevThs" should be lower than the threshold
for uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover. This parameter can
be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

2-1150

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.25.45 Downlink receive level Value P


Full Name Downlink receive level Value P

Abbreviation hoDlLevP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving strength is
one of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal strength is lower than
the downlink receiving level threshold, perform handover to improve the
downlink signal strength.
This parameter (HoDlLevThs) defines the related threhold value.
Usually, the value of "HoDlLevThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover. This
parameter can be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoDlLevN parameter defines the related N value. The HoDlLevP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

2-1151

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.46 Downlink receive level Value N


Full Name Downlink receive level Value N

Abbreviation hoDlLevN

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving strength is
one of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal strength is lower than
the downlink receiving level threshold, perform handover to improve the
downlink signal strength.
This parameter (HoDlLevThs) defines the related threhold value.
Usually, the value of "HoDlLevThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover. This
parameter can be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoDlLevN parameter defines the related N value. The HoDlLevP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

2-1152

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlLevP<=HoDlLevN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.47 Uplink receive quality Value P


Full Name Uplink receive quality Value P

Abbreviation hoUlQualP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving quality is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal quality is lower than the
uplink receiving quality threshold, perform handover to improve the
uplink signal quality.
This parameter (HoUlQualThs) defines the related threhold value.
Usually, the value of "HoUlQualThs" should be lower than the threshold
for uplink power control (increase). That is, perform power control first. If
Description power control does not function, perform handover.

2-1153

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The HoUlQualN parameter defines the related N value. The HoUlQualP


parameter defines the related P value.
This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.48 Uplink receive quality Value N


Full Name Uplink receive quality Value N

Abbreviation hoUlQualN

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1154

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, handover decisions depend upon a


series of average values received. The uplink receiving quality is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal quality is lower than the
uplink receiving quality threshold, perform handover to improve the
uplink signal quality.
This parameter (HoUlQualThs) defines the related threhold value.
Usually, the value of "HoUlQualThs" should be lower than the threshold
for uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover.
The HoUlQualN parameter defines the related N value. The HoUlQualP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1155

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.25.49 Downlink receive quality Value P


Full Name Downlink receive quality Value P

Abbreviation hoDlQualP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving quality is one
of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal quality is lower than
the downlink receiving quality threshold, perform handover to improve
the downlink signal quality.
This parameter (HoDlQualThs) defines the related threhold value.
Usually, the value of "HoDlQualThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover.
The HoDlQualN parameter defines the related N value. The HoDlQualP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 1

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult


to perform handover. The smaller the value is, the easier the handover
Configuration Rule and
is.If the value is too large, quantity of call drops rises easily.
Adjustment Suggestion
If the value is too small, number of unnecessary handovers may
increase.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1156

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.50 Downlink receive quality Value N


Full Name Downlink receive quality Value N

Abbreviation hoDlQualN

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon a


series of average values received. The downlink receiving quality is one
of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal quality is lower than
the downlink receiving quality threshold, perform handover to improve
the downlink signal quality.
This parameter (HoDlQualThs) defines the related threhold value.
Usually, the value of "HoDlQualThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover.
The HoDlQualN parameter defines the related N value. The HoDlQualP
parameter defines the related P value.
Description This parameter is supported from version V6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

2-1157

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship HoDlQualP<=HoDlQualN

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.51 Rapid handover Threshold


Full Name Rapid handover Threshold

Abbreviation rapidHoThs

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

During uplink rapid fading handover, some parameters should be


used. During SDCCH handover, the rapid handover threshold value
is the uplink signal intensity threshold value. If the measured uplink
signal intensity of a call is continuously lower than the rapid handover
threshold, then it triggers handover from the existing cell to the most
probable candidate cell.
RapidHoN is a counter value. That is, the minimum number of times
that the measured signal intensity is continuously lower than the rapid
handover threshold. The value of RapidHoN should ensure that the
rapid handover is faster than the ordinary signal level handover.
The value of RapidHoThs can be set to 15 (that is, -96 dBm~-95 dBm)
Description that is consistent with the level threshold value of ordinary handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 10

2-1158

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason EXP

This parameter takes effect after the parameter HoControl13 is set to


allow the quick level lowering handover. RapidHoThs should be set not
larger than downlink level handover threshold, and the decision N value
Configuration Rule and
is smaller the N value for level decision.
Adjustment Suggestion
It is recommended to use the default values.
Under the situations of fast moving and weak coverage, call drop ratio
can be lowerd.

Change Mode Offline

Related features ZGO-02-02-001 Handover between Macro- and Micro-cells

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.52 Rapid handover Value N


Full Name Rapid handover Value N

Abbreviation rapidHoN

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

2-1159

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

During uplink rapid fading handover, some parameters should be


used. During SDCCH handover, the rapid handover threshold value
is the uplink signal intensity threshold value. If the measured uplink
signal intensity of a call is continuously lower than the rapid handover
threshold, then it triggers handover from the existing cell to the most
probable candidate cell.
RapidHoN is a counter value. That is, the minimum number of times
that the measured signal intensity is continuously lower than the rapid
handover threshold. The value of RapidHoN should ensure that the
rapid handover is faster than the ordinary signal level handover.
The value of RapidHoThs can be set to 15 (that is, -96 dBm~-95 dBm)
Description that is consistent with the level threshold value of ordinary handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason EXP

This parameter takes effect after the parameter HoControl13 is set to


allow the quick level lowering handover. RapidHoThs should be set not
larger than downlink level handover threshold, and the decision N value
Configuration Rule and
is smaller the N value for level decision.
Adjustment Suggestion
It is recommended to use the default values.
Under the situations of fast moving and weak coverage, call drop ratio
can be lowerd.

Change Mode Offline

Related features ZGO-02-02-001 Handover between Macro- and Micro-cells

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1160

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.25.53 Max time advance threshold between MS and BTS


Full Name Max time advance threshold between MS and BTS

Abbreviation distanceThs

Managed Object SDCCH Handover Control

3GPP Name None

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon re-


ceived average value of uplink and downlink signal strength. The decision
process is as follows: For the latest N average values of TA (distance),
if P of the N values rises above relevant threshold value, then perform
Description handover. The handover is due to MS being out of the cell service range.

Instance Cell

{parent.cellType==0}[0..63]
{parent.cellType==1}[0..63]
{parent.cellType==2}[0..63]
{parent.cellType==3}[0..63]
Value Range and Step {parent.cellType==4}[0..219]

Unit N/A

{parent.cellType==0}63,
{parent.cellType==1}63,
{parent.cellType==2}63,
{parent.cellType==3}63,
Default Value {parent.cellType==4}219

Default Value
Configuration Reason EXP

Configuration Rule and TA handover is seldom applied. Set this parameter


Adjustment Suggestion as needed.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1161

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.54 Distance handover Value P


Full Name Distance handover Value P

Abbreviation distanceP

Managed Object SDCCH Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

According to GSM specifications, arbitration for SDCCH can be


conducted after a series of average values of uplink and downlink signal
strength are obtained. The distance between MS and BTS can impact
the handover. The arbitration process is as follows: For the latest N
average values of TA (distance), if P of the N values are higher than the
relevant threshold value, perform a handover. The handover happens
due to MS being out of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description DistanceP defines the relevant P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason to 2, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of


Configuration Rule and handover decision, handover is too frequent.
Adjustment Suggestion If the value is too large, it is very difficult to satisfy the condition of
handover decision.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

This parameter takes effect when handovers on SDCCH are supported.


Relationship
The parameter value should not be higher than DistanceN.

Related Interfaces N/A

2-1162

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.55 Distance handover Value N


Full Name Distance handover Value N

Abbreviation distanceN

Managed Object SDCCH Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

According to GSM specifications, arbitration for SDCCH can be


conducted after a series of average values of uplink and downlink signal
strength are obtained. The distance between MS and BTS can impact
the handover. The arbitration process is as follows: For the latest N
average values of TA (distance), if P of the N values are higher than the
relevant threshold value, perform a handover. The handover happens
due to MS being out of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description DistanceP defines the relevant P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

2-1163

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

This parameter takes effect when handovers on SDCCH are supported.


Relationship
The parameter value should not be lower than DistanceP.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.56 Downlink rapid handover offset of high speed


Full Name Downlink rapid handover offset of high speed

Abbreviation dlRapidHoOffsetH

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

After getting a series of measurement reports, you can do the decisions


for SDCCH downlink rapid handover.
The downlink rapid is the reason to cause handover. The decision
process is as follows: do the handover if the latest downlink level
values (without average processing) is higher than the sum of relevant
threshold values and offset values. The handover reason is downlink
rapid handover. DLRapidHoOffset_0 defines the offset threshold value
for downlink rapid handover if the train speed is higher than 250km/hr.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 0..63

Unit dB

Default Value 0

Default Value
Configuration Reason experience value

2-1164

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

For the threshold under high speed scenario,


Configuration Rule and rapid handover should be performed, thereby it is better to set the
Adjustment Suggestion offset value to a relatively small value to assist in making handover
decisions.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.57 Downlink rapid handover offset of middle speed


Full Name Downlink rapid handover offset of middle speed

Abbreviation dlRapidHoOffsetM

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

After measurement reports are obtained, the arbitration can be made


for downlink handover caused by fast moving.
The fast moving is one of the triggering cause for downlink handover.
The arbitration process is the following: if the recent N consecutive
downlink levels (not the average values) are higher than the sum of
threshold and offset values, handover should be conducted. The reason
for handover is fast moving. The parameter DLRapidHoOffset_1 defines
the offset threshold for the handover on SDCCH caused by fast moving
speed of 150km//h to 250km/.
Description V6.20.614b and later versions will support this parameter.

Instance Cell

2-1165

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..63

Unit dB

Default Value 2

Setting of the default value is in accordance


Default Value
with the radio environment that mostly the speed is 150~250km/h under
Configuration Reason
the high-speed scenario.

The value is applicable to the coverage area under such high-speed


Configuration Rule and scenarios as expressways, and high-speed railways on which the train
Adjustment Suggestion speed is 150~250km/h.
Higher speed requires a smaller offset value to realize a faster handover.

Change Mode Offline

Related features ZGO-02-02-018 Handover Based on Downlink Level Fast Fading

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.58 Downlink rapid handover offset of low speed


Full Name Downlink rapid handover offset of low speed

Abbreviation dlRapidHoOffsetL

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1166

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

After measurement reports are obtained, it can be decided whether to


conduct SDCCH downlink quick handover.
If the recent N consecutive downlink levels (not the average values) are
higher than the sum of threshold and offset values, handover should be
conducted. The reason for handover is rapid moving. The parameter
DLRapidHoOffset_2 defines the offset threshold value for the downlink
Description quick handover when the train speed is lower than 150km/h.

Instance Cell

Value Range and Step 0..63

Unit dB

Default Value 5

Setting of the default value is in accordance


Default Value
with the radio environment that mostly the speed is lower than 150
Configuration Reason
km/h under the high-speed scenario.

The value is applicable to the coverage area under such high-speed


Configuration Rule and scenarios as expressways, and high-speed railways on which the train
Adjustment Suggestion speed is lower than 150 km/h.
Higher speed requires a smaller offset value to realize a faster handover.

Change Mode Offline

Related features ZGO-02-02-018 Handover Based on Downlink Level Fast Fading

Related Parameters ShoEnable

This parameter takes effect when the system support SDCCH downlink
Relationship
quick handover.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.59 PBGT handover Value P


Full Name PBGT handover Value P

2-1167

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation pbgtHoP

Managed Object SDCCH Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference N/A

During an SDCCH handover, if there are P of N PBGT values meets the


Description arbitration conditions for handover, the PBGT handover will be conducted.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.60 PBGT handover Value N


Full Name PBGT handover Value N

Abbreviation pbgtHoN

2-1168

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object SDCCH Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference N/A

During an SDCCH handover, if there are P of N PBGT values meets the


Description arbitration conditions for handover, the PBGT handover will be conducted.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.61 Downlink rapid quality drop THS


Full Name Downlink rapid quality drop THS

Abbreviation dlQualRapidHoThs

Managed Object SDCCH Handover Control

2-1169

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold and value N of downlink rapid


quality drop.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 8..70

Unit N/A

Default Value 60

Default Value If the quality value is higher than 60, quick


Configuration Reason handover needs to be conducted.

The possibility to start the handover becomes


smaller if the quality value becomes higher. If the parameter value
Configuration Rule and
is set too high, call drop will happen easily. If the value is too
Adjustment Suggestion
low, there will be more handovers. This function increase the risk
of handover failure ratio.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.62 Downlink rapid quality drop Value N


Full Name Downlink rapid quality drop Value N

Abbreviation dlQualRapidHoN

Managed Object SDCCH Handover Control

2-1170

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold and value N of downlink rapid


quality drop.
Description This parameter is supported from version 6.20.615b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, the higher is the


Configuration Rule and accuracy of handover decision, the lower is the realtime; The smaller
Adjustment Suggestion the value is, the lower is the accuracy of handover decision, the
higher is the realtime.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.63 Neighbour cell for emergency handover


Full Name Neighbour cell for emergency handover

Abbreviation ncellWindowEmerg

Managed Object SDCCH Handover Control

3GPP Name N/A

2-1171

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter indicates the size of the window used for calculating the
average value of signal strength of the neighbour cell with emergent
handover. The size is the number of samples used in averaging.
Description This parameter is supported from version 6.20.614b.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason normal setting

Changing the parameter value can impact the


Configuration Rule and sensitivity of the target cell selection by handover decision. The
Adjustment Suggestion neighbor cell is not likely to be chosen as the target cell if the
parameter value is big.

Change Mode Offline

Related features N/A

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.710d

Parameter Modifying
Detail Update

2-1172

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.25.64 Allow signal quality handover on SDCCH(High speed)


Full Name Allow signal quality handover on SDCCH(High speed)

Abbreviation sdBepHoControl_H

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on SDCCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters sdMeanBEPHoThs,sdMeanBEPHoP,sdMeanBEPHoN,sd-


CVBEPHoThs,sdCVBEPHoP,sdCVBEPHoN

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.65 Allow signal quality handover on SDCCH(Middle speed)


Full Name Allow signal quality handover on SDCCH(Middle speed)

2-1173

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation sdBepHoControl_M

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on SDCCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters sdMeanBEPHoThs,sdMeanBEPHoP,sdMeanBEPHoN,sd-


CVBEPHoThs,sdCVBEPHoP,sdCVBEPHoN

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.66 Allow signal quality handover on SDCCH(Low speed)


Full Name Allow signal quality handover on SDCCH(Low speed)

Abbreviation sdBepHoControl_L

Managed Object SDCCH Handover Control

2-1174

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description Allow signal quality handover on SDCCH(High speed)

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion The value is set and adjusted as required.

Change Mode Offline

Related features N/A

Related Parameters sdMeanBEPHoThs,sdMeanBEPHoP,sdMeanBEPHoN,sd-


CVBEPHoThs,sdCVBEPHoP,sdCVBEPHoN

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.67 Handover Threshold of Mean Bit Error Probability on


SDCCH
Full Name Handover Threshold of Mean Bit Error Probability on SDCCH

Abbreviation sdMeanBEPHoThs

Managed Object SDCCH Handover Control

3GPP Name N/A

2-1175

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

Description Handover Threshold of Mean Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 9

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion Adjust in accordance with network environment

Change Mode Offline

Related features N/A

Related Parameters sdBepHoControl

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH


Full Name Handover Value P of Mean Bit Error Probability on SDCCH

Abbreviation sdMeanBEPHoP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Value P of Mean Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 1..20

2-1176

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 2

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters sdBepHoControl,sdMeanBEPHoN

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH


Full Name Handover Value N of Mean Bit Error Probability on SDCCH

Abbreviation sdMeanBEPHoN

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Value N of Mean Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason empirical value

2-1177

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters sdBepHoControl,sdMeanBEPHoP

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH


Full Name Handover Threshold of CV Bit Error Probability on SDCCH

Abbreviation sdCVBEPHoThs

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover Threshole of CV Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 4

Default Value This is a newly-added handover function that may be overlapped with
Configuration Reason the downlink quality handover.

Configuration Rule and


Adjustment Suggestion Adjust in accordance with network environment

Change Mode Offline

Related features N/A

2-1178

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters sdBepHoControl

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.71 Handover P Number of CV Bit Error Probability on SDCCH


Full Name Handover P Number of CV Bit Error Probability on SDCCH

Abbreviation sdCVBEPHoP

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover P Number of CV Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters sdBepHoControl,sdCVBEPHoN

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

2-1179

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.72 Handover N Number of CV Bit Error Probability on SDCCH


Full Name Handover N Number of CV Bit Error Probability on SDCCH

Abbreviation sdCVBEPHoN

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Handover N Number of CV Bit Error Probability on SDCCH

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason empirical value

Configuration Rule and


Adjustment Suggestion It is recommended that this parameter be not adjusted.

Change Mode Offline

Related features N/A

Related Parameters sdBepHoControl,sdCVBEPHoP

Relationship P<N

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1180

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.73 Back to Source Cell when PBGT Handover


Full Name Back to Source Cell when PBGT Handover

Abbreviation PBGTHoBacktoSource

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Turns on/off the electricity level requirement switch for PBGT handovers.
If the electricity level does not meet the requirement, the PHY Info is not
delivered, therefore the handover fails and the MS is back to the source
Description channel.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, this function is disabled.

Configuration Rule and To enable the back-to-source cell function for PBGT handovers, set this
Adjustment Suggestion parameter to "Yes".

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1181

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.74
Back to Source Cell when Other
Handover
Back to Source Cell when Other
Full Name Handover

Abbreviation OtherHoBacktoSource

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Turns on/off the electricity level requirement switch for non-PBGT han-
dovers. If the electricity level does not meet the requirement, the PHY
Info is not delivered, therefore the handover fails and the MS is back to
Description the source channel.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, this function is disabled.

Configuration Rule and To enable the back-to-source cell function for non-PBGT handovers,
Adjustment Suggestion set this parameter to "Yes".

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1182

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.75 HoAccess Require Rxlevel offset


Full Name HoAccess Require Rxlevel offset

Abbreviation HoAccessReqLevOffset

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Used to calculate the offset value for the required handover access level.
The calculation formula is: 110 - TargetAverageRxLevel + LinkBalance +
Description (HoAccessReqLevOffset - 35).

Instance Cell

Value Range and Step 0..70

Unit N/A

Default Value 45

Default Value
Configuration Reason The default offset value is 10 db.

Configuration Rule and To lower the requirement for the handover access level, increase the
Adjustment Suggestion parameter value.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1183

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.76
HoAccess Require Rxlevel Select
Strategy when Other Handover
HoAccess Require Rxlevel Select
Full Name Strategy when Other Handover

Abbreviation OtherHoAccessLevSel

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Sets the selection policy for the required handover access threshold level
that triggers a non-PBGT handover. The following electricity levels are
valid: minimum handover access level, or the level calculated by the
formula: 110 - TargetAverageRxLevel + LinkBalance + (HoAccessRe-
Description qLevOffset - 35).

Instance Cell

1:Expeted uplink level


Value Range and Step 2:Minimum allowed access level

Unit N/A

Default Value 1

Default Value
Configuration Reason By default, policy 1 is applied.

Configuration Rule and If the SD indexes are degraded with policy 1, set this parameter to
Adjustment Suggestion 2 (policy 2).

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1184

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.77 Back to Source Cell when MSC Controlled Incoming


Handover
Full Name Back to Source Cell when MSC Controlled Incoming Handover

Abbreviation MSCHoInHoBack2Source

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Enables/Disables the back-to-source-cell function when SDCCH incom-


Description ing handover is performed.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This function is enabled to when the call drop rate is high at he field. By
Configuration Reason default this parameter is set to 0.

This function is enabled when the call drop rate at the field is high.
During the process of handover in from the external, the source cell
Configuration Rule and
is not informed when an MS is handed-over back to its source cell,
Adjustment Suggestion
therefore, the handover indexes of the source cell may be affected.
Generally back-to-source-cell function is recommended to be disabled.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1185

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.25.78 HoAccess Require CI


Full Name HoAccess Require CI

Abbreviation HoAccessReqCI

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

Description N/A

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 12

Default Value According to the lab data, demodulated signals of NB are bad when the
Configuration Reason receive signals CI is smaller than 12.

Configuration Rule and Enable the handover bounce scenario as required. Set a proper CI
Adjustment Suggestion threshold according to that of the actual frequency point used for testing.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1186

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.79 Good level and bad quality handover enable


Full Name Good level and bad quality handover enable

Abbreviation GoodLevBadRQHoEnable

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter describes whether this cell supports good level and bad
quality handover. If the bad quality handover is determined successfully
but there is not a candidate cell, the system determines whether to enable
Description the high level and bad quality handover.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the handover due to good level and bad quality is disabled.

According to the DT data, this function can be enabled if call drop


frequently occurs in SDCCH channels due to good level and bad
Configuration Rule and
quality. After enabling this function, pay attention to the call drop rate.
Adjustment Suggestion
If the call drop rate deteriorates, disable this function or modify the
"GoodLevBadRQoffSet" or "GoodLevBadRQHoDLLev" parameter.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1187

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.25.80 Good level and bad quality handover DL Level


Full Name Good level and bad quality handover DL Level

Abbreviation GoodLevBadRQHoDLLev

Managed Object SDCCH Handover Control

3GPP Name N/A

3GPP Reference N/A

The system triggers the high level and bad quality handover when the down-
Description link level of this cell is higher than the value of this parameter.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 30

Default Value By default, the handover due to good level and bad quality is determined
Configuration Reason when the downlink level of this cell is higher than -80 dB.

When it is difficult to initiate a handover due to good level and bad quality,
Configuration Rule and
decrease the threshold. After enabling this function, pay attention to the
Adjustment Suggestion
call drop rate. If the call drop rate deteriorates, increase the threshold.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SDCCH Handover Control

2-1188

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26 VAMOS Configuration(GVamos)


2.26.1 VAMOS Configuration ID
Full Name VAMOS Configuration ID

Abbreviation GVamos

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description VAMOS Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

2-1189

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.26.2 If support VAMOS


Full Name If support VAMOS

Abbreviation SupportVAMOS

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether this cell supports the VAMOS func-
Description tion.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and The VAMOS function is enabled according to the operator's
Adjustment Suggestion requirements.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1190

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.26.3 If support MUTE SAIC detection


Full Name If support MUTE SAIC detection

Abbreviation muteSaicDetect

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether this cell supports the function of


Description MUTE SAIC detection.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and Enable the function of MUTE SAIC detection


Adjustment Suggestion according to operator requirements.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.26.4 If support SAIC AFC detection


Full Name If support SAIC AFC detection

2-1191

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation saicAfcDetect

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether this cell supports the function of SAIC
Description AFC detection.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and Enable the function of SAIC AFC detection according
Adjustment Suggestion to operator requirements.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.26.5 The priority level of VAMOS pairing


Full Name The priority level of VAMOS pairing

Abbreviation priorLevelOfPair

Managed Object VAMOS Configuration

2-1192

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a priority level threshold for VAMOS pairing.


As required by telecom carriers, the system does not perform VAMOS
pairing for subscribers with high priority levels to guarantee their speech
quality. When the VAMOS feature is enabled, the system only performs
VAMOS pairing for subscribers whose priority levels are less than this
Description threshold.

Instance Cell

Value Range and Step 1..14

Unit N/A

Default Value 1

Default Value By default, pairing is allowed for all the


Configuration Reason subscribers.

Unless otherwise specified, pairing is allowed


Configuration Rule and
for all the subscribers. If operators have special requirements, adjust
Adjustment Suggestion
the priority of the subscribers for pairing as required.

Change Mode Offline

Related features ZGO-04-05-006 VAMOS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.26.6 The load of start VAMOS FR pairing


Full Name The load of start VAMOS FR pairing

Abbreviation frPairLoadThr

2-1193

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the load threshold for the channel with the
VAMOS FR pairing enabled.
When the cell load exceeds this threshold, the system triggers FR
Description pairing.

Instance Cell

Value Range and Step 20..100

Unit %

Default Value 40

When the cell load reaches 40%, it is required


Default Value to enable the VAMOS FR pairing to avoid congestion and enhance
Configuration Reason system
capacity.

The larger this parameter is, the lower is the possibility of initiating FR
matching, the higher is the possibility of cell congestion.
Configuration Rule and
The smaller this parameter is, the higher is the possibility of initiating
Adjustment Suggestion
FR matching, the more is the system interference caused by VAMOS
matching.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters HRPairLoadThr

Relationship FRPairLoadThr <= HRPairLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1194

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.26.7 The load of start VAMOS HR pairing


Full Name The load of start VAMOS HR pairing

Abbreviation hrPairLoadThr

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines the load threshold for the channel with the
VAMOS HR pairing enabled.
When the cell load exceeds this threshold, the system triggers FR or
Description HR pairing.

Instance Cell

Value Range and Step 20..100

Unit %

Default Value 80

When the cell load reaches 80%, that cell is


Default Value
regarded as busy. It is required to enable the VAMOS HR pairing to
Configuration Reason
enhance system capacity.

The larger this parameter is, the lower is the possibility of initiating HR
matching, the higher is the possibility of cell congestion.
Configuration Rule and
The smaller this parameter is, the higher is the possibility of initiating
Adjustment Suggestion
HR matching, the more is the system interference caused by VAMOS
matching.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters FRPairLoadThr

Relationship FRPairLoadThr <= HRPairLoadThr

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1195

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.26.8 Support VAMOS II


Full Name Support VAMOS II

Abbreviation SupportVAMOSII

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Sets whether VAMOS II MSs can access the network. Currently VAMOS
II MSs is not put into commercial use. The switch is designed to control
Description the management on VAMOS II MSs.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Currently VAMOS II MSs is not put into commercial use. By default
Configuration Reason VAMOS II MSs are not managed by the BSC.

Configuration Rule and


Adjustment Suggestion Set this parameter in terms of the test results at the candidate sites.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1196

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.26.9 P value of MS capability predetect


Full Name P value of MS capability predetect

Abbreviation MsPreDetP

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. This parameter refers to


Description the P value used for quality and level determination before detection.

Instance Cell

Value Range and Step 3..15

Unit N/A

Default Value 5

Default Value
Configuration Reason By default, it is an optimal test value.

Configuration Rule and The larger the value, the stricter the detection. It is recommended to use a
Adjustment Suggestion larger value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.10 N value of pair-release uplink quality


Full Name N value of pair-release uplink quality

Abbreviation PairRelUlQualN

2-1197

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description N value of uplink quality for pair release

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value To ensure accurate and fast unpairing, it is recommended to set this
Configuration Reason parameter to 3.

If the value is set too small, there are few samples for unpairing
Configuration Rule and determination, which causes inaccurate determination result. If the value
Adjustment Suggestion is set too large, unpairing determination takes a long time, which causes
call drop due to delayed unpairing.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.11 N value of pair-release downlink quality


Full Name N value of pair-release downlink quality

Abbreviation PairRelDlQualN

Managed Object VAMOS Configuration

3GPP Name N/A

2-1198

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

Description N value of downlink quality for pair release

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value To ensure accurate and fast unpairing, it is recommended to set this
Configuration Reason parameter to 3.

If the value is set too small, there are few samples for unpairing
Configuration Rule and determination, which causes inaccurate determination result. If the value
Adjustment Suggestion is set too large, unpairing determination takes a long time, which causes
call drop due to delayed unpairing.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.12 N value of MS capability predetect


Full Name N value of MS capability predetect

Abbreviation MsPreDetN

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. This parameter refers to


Description the N value used for quality and level determination before detection

2-1199

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 3..20

Unit N/A

Default Value 5

Default Value
Configuration Reason By default, it is an optimal test value.

Configuration Rule and The larger the value, the stricter the detection. It is recommended to use a
Adjustment Suggestion larger value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.13 Low level threshold of MS capability detect


Full Name Low level threshold of MS capability detect

Abbreviation MsDetLowLev

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. This parameter refers to


the lower threshold that the downlink receive level of MSs must meet before
Description detection, that is, the level of MSs should be higher than the threshold.

Instance Cell

Value Range and Step 70..111

2-1200

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 85

Default Value
Configuration Reason The test result of MS capability is accurate in the default range.

Configuration Rule and


Adjustment Suggestion Not modified as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.14 High level threshold of MS capability detect


Full Name High level threshold of MS capability detect

Abbreviation MsDetHighLev

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. This parameter refers to


the upper threshold that the downlink receive level of MSs must meet before
Description detection, that is, the level of MSs should be lower than the threshold.

Instance Cell

Value Range and Step 47..85

Unit N/A

Default Value 75

2-1201

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason The test result of MS capability is accurate in the default range.

When the "MsDetPwrC" switch is on, this parameter uses the default
value. In the case of downlink power control enabled, this parameter is
Configuration Rule and used together with the downlink power decrease threshold in normal
Adjustment Suggestion power control. When the downlink power control is enabled and the two
values are very close, use the default value. If the two values have a great
difference, set this parameter to 47.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.15 Downlink receive quality of pair-release threshold


Full Name Downlink receive quality of pair-release threshold

Abbreviation PairRelDlQuaThr

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description Downlink quality threshold for pair release

Instance Cell

Value Range and Step 0..70

Unit N/A

Default Value 39

2-1202

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The voice quality is acceptable if it is higher than the threshold.

If the threshold is set too high, bad voice quality will affect user perception
Configuration Rule and
and causes other consequences such as call drop. If the threshold is set
Adjustment Suggestion
too low, unpairing is frequent, which affects the system performance.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.16 AFC detect switch of MUTE SAIC


Full Name AFC detect switch of MUTE SAIC

Abbreviation AfcDtectOfMuteSaic

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. This parameter determines


whether to implement AFC detection for the MSs whose detection result is
Description "muteSAIC".

Instance Cell

Value Range and Step 0:Not detect 1:Detect

Unit N/A

Default Value 1

Default Value Further detection is required when an AFC problem exist in the MSs
Configuration Reason whose detection result is "muteSAIC".

2-1203

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion It is recommended to enable this function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.17 Uplink receive quality of pair-release threshold


Full Name Uplink receive quality of pair-release threshold

Abbreviation PairRelUlQuaThr

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description Uplink quality threshold for pair release

Instance Cell

Value Range and Step 0..70

Unit N/A

Default Value 39

Default Value
Configuration Reason The voice quality is acceptable if it is higher than the threshold.

If the threshold is set too high, bad voice quality will affect user perception
Configuration Rule and
and causes other consequences such as call drop. If the threshold is set
Adjustment Suggestion
too low, unpairing is frequent, which affects the system performance.

Change Mode Offline

2-1204

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.18 The period of SAIC AFC power control


Full Name the period of SAIC AFC power control

Abbreviation PwrCTimeOfSaicAfc

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

VAMOS power control parameter. This parameter refers to the interval of


Description SAIC AFC power control. It is the burst value of +SCPIR and -SCPIR.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason By default, it is an optimal test value.

Configuration Rule and


Adjustment Suggestion Not modified as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1205

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.19 The load of VAMOS pair release


Full Name The load of VAMOS pair release

Abbreviation PairReleaseLoadThr

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Load threshold of channels that enable the VAMOS pair release. When the
load of a cell is lower than the threshold, the call can initiate the VAMOS
Description pair release process.

Instance Cell

Value Range and Step 0..80

Unit %

Default Value 20

Default Value A balance should be made among cell load, voice quality and system
Configuration Reason performance.

If the threshold is set to high, the cell load does not decrease. If the
Configuration Rule and
threshold is set to low, the voice quality and system performance are not
Adjustment Suggestion
improved.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1206

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.20 The level power control switch of MS capability detect


Full Name the level power control switch of MS capability detect

Abbreviation MsDetPwrC

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Capability detection parameter of VAMOS MSs. When downlink power con-


trol is not enabled, this parameter determines whether to implement power
control on the MSs to be detected so that the level is between the upper
Description and lower thresholds.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

The test result of MS capability is accurate in the default range. In the


Default Value
places where power control is disabled, the power control needs to be
Configuration Reason
enabled independently.

Configuration Rule and


Adjustment Suggestion Enable this function when the downlink power control is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1207

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.21 The alpha value of SAIC AFC power control


Full Name the alpha value of SAIC AFC power control

Abbreviation PwrCAlphaOfSaicAfc

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

VAMOS power control parameter. This parameter refers to SCPIR value


Description used for SAIC AFC power control.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 4

Default Value
Configuration Reason By default, it is an optimal test value.

Configuration Rule and


Adjustment Suggestion Not modified as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

2-1208

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.22 Support pair release due to quality


Full Name Support pair release due to quality

Abbreviation PairReleaseOfQual

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter determines whether pair release due to quality is supported.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 1

Default Value When the voice quality of paired MSs decreases to a certain threshold,
Configuration Reason call drop occurs if they are not unpaired.

Configuration Rule and


Adjustment Suggestion Not modified

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1209

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.26.23 Support handover from VAMOS FR to VAMOS HR


Full Name Support handover from VAMOS FR to VAMOS HR

Abbreviation SupportVamosHO

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system triggers a handover from


VAMOS FR to VAMOS HR due to continuously high load after the VAMOS
Description FR is paired.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value For VAMOS FR-VAMOS HR handover, it occurs in two MSs


Configuration Reason simultaneously, which affects the system performance.

Configuration Rule and


Adjustment Suggestion Not modified unless otherwise specified

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.24 SAIC AFC power control switch


Full Name SAIC AFC power control switch

2-1210

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation PwrCOfSaicAfc

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

VAMOS power control parameter. This parameter controls the pairing of


AFC MSs, that is, it determines whether to use a particular power control
Description method for AFC MSs.

Instance Cell

Value Range and Step 0:Not use AFC power control 1:Use AFC power control

Unit N/A

Default Value 1

Default Value It is a new AFC power control method, which is disabled temporarily. It is
Configuration Reason enabled as required.

Configuration Rule and


Adjustment Suggestion Set according to the verification result on site

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.25 Pair of FR with HR


Full Name Pair of FR with HR

Abbreviation PairOfFrAndHr

Managed Object VAMOS Configuration

2-1211

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether this cell supports FR+FR pairs or


FR+HR pairs. 0: Not support F+F or F+H 1: Support F+F 2: Support F+H
Description 3: Support F+F and F+H

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 3

Default Value By default, all pairing modes are allowed, which improves the channel
Configuration Reason utilization.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.26 P value of pair-release uplink quality


Full Name P value of pair-release uplink quality

Abbreviation PairRelUlQualP

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

2-1212

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Description P value of uplink quality for pair release

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value To ensure accurate and fast unpairing, it is recommended to set this
Configuration Reason parameter to 2.

If the value is set too small, the unpairing conditions are easy to be met,
Configuration Rule and
which causes frequent unpairing. If the value is set too large, the unpairing
Adjustment Suggestion
conditions are difficult to be met, which causes few unpairing.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.26.27 P value of pair-release downlink quality


Full Name P value of pair-release downlink quality

Abbreviation PairRelDlQualP

Managed Object VAMOS Configuration

3GPP Name N/A

3GPP Reference N/A

Description P value of downlink quality for pair release

Instance Cell

Value Range and Step 1..20

2-1213

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 2

Default Value To ensure accurate and fast unpairing, it is recommended to set this
Configuration Reason parameter to 2.

If the value is set too small, the unpairing conditions are easy to be met,
Configuration Rule and
which causes frequent unpairing. If the value is set too large, the unpairing
Adjustment Suggestion
conditions are difficult to be met, which causes few unpairing.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->VAMOS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27 UTRAN Measurement(GUtranMeasure)


2.27.1 UTRAN Measurement ID
Full Name UTRAN Measurement ID

Abbreviation GUtranMeasure

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

Description UTRAN Measurement ID

Instance None

Value Range and Step N/A

Unit N/A

2-1214

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.2 Require UE to send UTRAN class-mark change message


early
Full Name Require UE to send UTRAN class-mark change message early

Abbreviation ecsc_3g

Managed Object UTRAN Measurement

3GPP Name 3G Early Classmark Sending Restriction44.018

3GPP Reference 3GPP TS 44.018

This parameter indicates whether a UE is required to send UTRAN class-


Description mark change message early.

Instance Cell

0: Not allow to send "UTRAN class mark change" message


1: Both ECSC and UE control whether the UE sends "UTRAN classmark
Value Range and Step change" message

Unit N/A

Default Value 0

2-1215

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value Users decide whether to enable UTRAN CLASSMARK


Configuration Reason early sending.

This parameter should be enabled when the 2/3G


Configuration Rule and
handover is needed and the core network does not open the process
Adjustment Suggestion
obtained by CLASSMARK.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.3 Channel location of si2quater broadcast


Full Name Channel location of si2quater broadcast

Abbreviation si2quaterPos

Managed Object UTRAN Measurement

3GPP Name SI2quater_POSITION

3GPP Reference 3GPP TS 44.018

Description This parameter indicates channel location of SI2quater broadcast.

Instance Cell

0: Broadcast on normal BCCH block


1: Broadcast on extended BCCH block , AGCH_BLOCK reservation
Value Range and Step value will be 1

Unit N/A

Default Value 0

Default Value
Configuration Reason Are new features, maintaining the same as before.

2-1216

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and The default value is adopted. If the system


Adjustment Suggestion is configured with extended BCCH, this parameter is valid.

Change Mode Offline

Related features N/A

Related Parameters BsAgBlkRes

When SI2QuaterPos is set as BCCH extended,


Relationship the radio blocks will be occupied. The reserved value for BsAgBlkRes
should be at least 1.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.4 CS measurement type reported by UE


Full Name CS measurement type reported by UE

Abbreviation reportTypeCS

Managed Object UTRAN Measurement

3GPP Name REPORT_TYPE

3GPP Reference 3GPP TS 45.008

It indicates enhanced measurement report for UE or measurement report


Description message.

Instance Cell

0: enhanced measurement report


Value Range and Step 1: normal measurement report

Unit N/A

Default Value 1

Default Value
Configuration Reason And consistent with the reported normal mobile phone

2-1217

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

It is recommended to use the default value.


Configuration Rule and The MS that supports 2/3G can give the enhanced measurement report.
Adjustment Suggestion More data from adjacent cells can be included in the measurement
report.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.5 CS number of same frequency adjacent cells in report


Full Name CS number of same frequency adjacent cells in report

Abbreviation svrBandRprtCS

Managed Object UTRAN Measurement

3GPP Name SERVING_BAND_REPORTING

3GPP Reference 3GPP TS 45.008

This parameter defines the number of adjacent cells with the same fre-
quency band as the serving cell, which are included in the measurement
Description report or the strongest cell list (measurement data in a terminal).

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason Protocol Recommended Value

2-1218

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.6 Measurement threshold of UE performing UTRAN cell


reselection
Full Name Measurement threshold of UE performing UTRAN cell reselection

Abbreviation qsearch_I

Managed Object UTRAN Measurement

3GPP Name Qsearch_I

3GPP Reference 3GPP TS 45.008

When the average receiving level (RLA_C) of this cell is lower than
the lower threshold (0 to 6) of this parameter or higher than the upper
threshold (8 to 14) of this parameter, the UE starts the measurement on
a UTRAN reselection cell.
7: always
Description 15: never

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 7

2-1219

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Do not search the default

Usually in a cell that is expected to interwork with other cells, an MS is


always conducting measurement on other systems. As long as the 3G
system signals meet the residing requirements, handover to this system
Configuration Rule and can be conducted.
Adjustment Suggestion If the system is expected to support GSM -> 3G re-selection, this
parameter should be set 7 in the cell configuration for another radio
system, which will improve the re-selection success rate from 2G to 3G.
The value "15" means the measurement function is disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.7 FDD reselection offset


Full Name FDD reselection offset

Abbreviation fdd_Qoffset

Managed Object UTRAN Measurement

3GPP Name FDD_Qoffset

3GPP Reference 3GPP TS 45.008

2-1220

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used to reselect the UTRAN adjacent cell if the


following requirements are satisfied:
Received signal code power (RSCP) of this adjacent cell is higher than
average receiving level RLA_C of this cell.
RSCP of the adjacent cell is higher than RLA_C of all adjacent GSM
cells by at least FDD_Qoffset (FDD reselection offset) for more than
5 seconds. FDD_Qoffset of the cell increases by 5 dB if the cell is
reselected 15 seconds earlier.
Ec/No (code-noise ratio) of this adjacent cell is larger than or equal to
designated FDD_Qmin (minimum value of code-noise ratio of UTRAN
reselected cell).
If more than one UTRAN cell meets above conditions, then select the
Description cell which has the largest RSCP.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 0

Default Value
Configuration Reason No adjustment

"8" means that the offset between GSM signals


and 3G signals is "0". However, 3G system frequently occupies 2G
Configuration Rule and frequencies,
Adjustment Suggestion and the transmission power loss is big. It is good to set this parameter
"0", that is, 3G signal quality is not considered in the handover,
thus the 2G -> 3G re-selection success rate is raised.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1221

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.8 Min Ec/No of UTRAN reselecting cell


Full Name Min Ec/No of UTRAN reselecting cell

Abbreviation fdd_Qmin

Managed Object UTRAN Measurement

3GPP Name FDD_Qmin

3GPP Reference 3GPP TS 45.008

This parameter indicates the minimum value of Ec/No of the UTRAN cell
when it reselects adjacent cell. The value of Ec/No of the UTRAN cell
should be larger than the value defined by this parameter in order to
reselect the adjacent cell.
Description This parameter is changed in V6.20.613f.

Instance Cell

0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
Value Range and Step 7: -12dB

Unit N/A

Default Value 7

Default Value
Configuration Reason Median

Key parameter in 2G -> 3G cell re-selection. The recommended value


for the parameter is 7(-12dB). The cell re-selection arbitration threshold
between WCDMA and GSM/GPRS systems, for example, there should
Configuration Rule and
be the 4 dB distance between the WCDMA parameter SsearchRAT and
Adjustment Suggestion
the GSM/GPRS parameter FDD_Qmin.
The parameter can be set 7 to raise the success rate of 2G -> 3G
re-selection.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1222

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.9 Initial parameter instead of qsearch_c before UE receiving


qsearch_C
Full Name Initial parameter instead of qsearch_c before UE receiving qsearch_C

Abbreviation qsearchCInit

Managed Object UTRAN Measurement

3GPP Name Qsearch_C_Initial

3GPP Reference 3GPP TS 45.008

This parameter is used to search and measure the cell while MS does not
Description receive Qsearch_C on SACCH.

Instance Cell

0: Qsearch_I
Value Range and Step 1: Always

Unit N/A

Default Value 0

Default Value
Configuration Reason Can be adjusted using the Qsearch_I

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1223

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.10 Threshold when UE performs search under specialized


mode
Full Name Threshold when UE performs search under specialized mode

Abbreviation qsearch_C

Managed Object UTRAN Measurement

3GPP Name Qsearch_C

3GPP Reference 3GPP TS 45.008

This parameter defines a threshold value. When the average receiving


level (RLA_C) of this cell is lower than the lower threshold (0 to 6) of this
parameter or higher than the upper threshold (8 to 14) of this parameter,
the UE starts to search for 3G adjacent cells.
7: always
Description 15: never

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 15

Default Value
Configuration Reason Do not search the default

If the system is expected to support GSM ->


Configuration Rule and 3G handover, it is not recommended to set this parameter 15. If the
Adjustment Suggestion system is not expected to support GSM->3G handover, the parameter
should be set 15.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1224

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.11 CS class of reported quantities of UTRAN adjacent cells


Full Name CS class of reported quantities of UTRAN adjacent cells

Abbreviation fddRepQntCs

Managed Object UTRAN Measurement

3GPP Name FDD_REP_QUANT

3GPP Reference 3GPP TS 45.008

Description It indicates whether an MS uses RSCP or Ec/No to report measurement.

Instance Cell

0:RSCP, receiving power of CPICH scramble of UTRAN cell at UE, the


unit is dbm
1:Ec/No, ratio of the receiving power to thermal noise of CPICH scramble
Value Range and Step of UTRAN cell, the unit is db

Unit N/A

Default Value 1

Default Value
Configuration Reason No reason

Configuration Rule and The default value is adopted. The value can
Adjustment Suggestion be adjust to "0" as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1225

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.12 CS max number of UTRAN/FDD adjacent cells in


measurement report
Full Name CS max number of UTRAN/FDD adjacent cells in measurement report

Abbreviation fddMulRatRrptCs

Managed Object UTRAN Measurement

3GPP Name XXX_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum number of UTRAN/FDD adjacent


cells included in packet measurement report or strongest cell list. If
UTRAN/FDD adjacent cells are not full, the vacancies are used for
GSM adjacent cells. (If TDD technology is available, the vacancies are
Description reserved for TDD cells)

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason Protocol recommended values

Configuration Rule and If 3G is preferred in 2/3G handover strategy,


Adjustment Suggestion this parameter can increase the number of 3G adjacent cells.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1226

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.13 Measurement threshold of UE performing GPRS UTRAN


cell_0/Measurement threshold of UE performing_1 GPRS
UTRAN cell
Measurement threshold of UE performing GPRS UTRAN cell_0/Measure-
Full Name ment threshold of UE performing_1 GPRS UTRAN cell

Abbreviation qsearch_P

Managed Object UTRAN Measurement

3GPP Name Qsearch_P

3GPP Reference 3GPP TS 45.008

Qsearch_P is the threshold for UEs to start measuring 3G adjacent cell. It


is notified to the specified UE in the PACKET MEASUREMENT ORDER
or PACKET CELL CHANGE ORDER message. When the signal level is
lower than threshold 0 - 7 (corresponding to - 98, - 94, , - 74 dBm),
or greater than threshold 8 - 15 (- 78, - 74, ,- 54 dBm), the system
searches for 3G cells. The threshold 7 indicates always search and 15
Description indicates never search.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value [15,15]

Default Value
Configuration Reason initial value

2-1227

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is not carried in SI2quate. Even it is broadcast in


SI2quater, Qsearch_P in the SI2quater takes effect only after the PMO
or PCCO message of the adjacent cell information is sent on PACCH,
whereas the PMO or PCCO message also includes the Qsearch_P.
In this case, this parameter functions when it is sent to the MS in the
ttransmission state. The MS still uses the Qsearch_I parameter in idle
state.
Configuration Rule and The value 7 enables the MS to perform 3G adjacent cell measurement.
Adjustment Suggestion The value 15 enables the MS not to perform 3G adjacent cell
measurement.
The value 1-6 ensures that the level of the serving cell is lower than
that of threshold for measurement.
The value 8-14 ensures that the level of the serving cell is higher than
that of threshold for measurement.
IIn general, it is recommended to set this parameter to 7, to make PS
select 3G network.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection


offset_1
Full Name FDD GPRS reselection offset_0/FDD GPRS reselection offset_1

Abbreviation fdd_Gprs_Qoffset

Managed Object UTRAN Measurement

3GPP Name FDD_GPRS_Qoffset

2-1228

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter defines the minimum offset with which the RSCP of the
reselected 3G FDD adjacent cell shall be higher than the RLA_P of the
serving cell and other suitable GSM adjacent cell. A one-dimensional
array is used to represent packet idle state parameter and packet
transmission state parameter. To enable a UE to reselect a 3G adjacent
cell, the following conditions must be met for at least 5 seconds:
CPICH Ec/No > = FDD_ Qmin FDD_Qmin_Offset
CPICH RSCP > RLA_P(s+n) + _FDD_GPRS_Qoffset
CPICH RSCP > = FDD_RSCP_Threshold
The parameters FDD_GPRS_Qoffset, FDD_Qmin, and
FDD_Qmin_Offsett are broadcast to the UE in the packet system
message PSI3quater.
RLA_P(s+n) defines the average value of the signal strengths of the
serving cell and n strongest GSM neighbor cells.
FDD_RSCP_Threshold = FDD_RSCPmin min((P_MAX 21 dBm), 3
dB) if FDD_RSCPmin is broadcast in the serving cell system message;
otherwise,
FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10 dB
0 indicates that the 3G FDD adjacent cell is always selected.
1 = -28 dB
2 = -24 dB

Description 15 = 28 dB

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value [8,8]

Default Value
Configuration Reason offset is 0dBm, recommended in 3GPP

If a user always expects to access the adjacent


Configuration Rule and cells of this 3G FDD, the parameter should be set 0. It is easier
Adjustment Suggestion to access the cells if the parameter is set smaller. If the strategy
is "prefer 3G network", the parameter should be set 0.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1229

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection


offset_1
Full Name TDD GPRS reselection offset_0/TDD GPRS reselection offset_1

Abbreviation tdd_Gprs_Qoffset

Managed Object UTRAN Measurement

3GPP Name TDD_GPRS_Qoffset

3GPP Reference 3GPP TS 45.008

This parameter defines the minimum offset with which the RSCP of the
reselected 3G TDD adjacent cell shall be higher than the RLA_P of the
serving cell and other suitable GSM adjacent cell. A one-dimensional
array is used to represent packet idle state parameter and packet
transmission state parameter. To enablle a UE to reselect a 3G adjacent
cell, the following conditions must be met for at least 5 seconds:
CPICH RSCP > RLA_P(s+n) + TDD_GPRS_Qoffset
The parameter TDD_GPRS_Qoffset is broadcast to the UE in the packet
system message PSI3quater.
RLA_P(s+n) defines the average value of the signal strengths of the
serving cell and n strongest GSM neighbor cells.
0 indicates that the 3G TDD adjacent cell is always selected.
1 = -28 dB
2 = -24 dB

15 = 28 dB
In 2009, the above algorithm in 3GPP is updated to an absolute value
decision criteria: RSCP > = TDD_GPRS_Qoffset, that is, reselection is
triggered when the measured signal strength remains greater than or
equal to the TDD_GPRS_Qoffset for at least 5 seconds. In the absolute
value decision criteria, the mapping between the TDD_GPRS_Qoffset
Description value and signal strenth is as follows:

2-1230

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0 = -105dBm, 1 = -102dBm, 2=-99dBm, 3 = -96dBm, 4 = -93dBm, 5


= -90dBm, 6 = -87dBm, 7 = -84dBm, 8 = -81dBm, 9 = -78dBm, 10 =
-75dBm, 11 = -72dBm, 12 = -69dBm, 13 = -66dBm, 14 = -63dBm, 15 =
-60dBm

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value [8,8]

offset is 0dBmaccording to old scheme, 0dBm is the recommended


Default Value
value in 3GPP;according to the new scheme, the recommended value
Configuration Reason
is 5, -90dBm

For MS under old work mode, the parameter is


regarded as a relative offset. If a user always expects to access
the adjacent cells of this 3G TDD, the parameter should be set 0.
It is easier to access the cells if the parameter is set smaller.
Configuration Rule and
If the strategy is "prefer 3G network", the parameter should be set
Adjustment Suggestion
0. For MS under new work mode, the parameter is regarded as an
absolute
threshold. It is easier to access the cells if the parameter is set
smaller.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1231

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No


of UTRAN reselecting cell_1
PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
Full Name reselecting cell_1

Abbreviation fdd_QminPs

Managed Object UTRAN Measurement

3GPP Name FDD_Qmin

3GPP Reference 3GPP TS 45.008

This parameter defines the minimum value with which the Ec/No of the
reselected 3G adjacent cell shall be higher than or equal to the current
cell. A one-dimensional array is used to represent packet idle state
parameter and packet transmission state parameter. To enable a UE to
reselect a 3G adjacent cell, the following conditions must be met for
at least 5 seconds:
CPICH Ec/No > = FDD_ Qmin FDD_Qmin_Offset
CPICH RSCP > RLA_P(s+n) + _FDD_GPRS_Qoffset
CPICH RSCP > = FDD_RSCP_Threshold
The parameters FDD_GPRS_Qoffset, FDD_Qmin, and
FDD_Qmin_Offset are broadcast to the UE in the packet system
message PSI3quater.
RLA_P(s+n) defines the average value of the signal strengths of the
serving cell and n strongest GSM neighbor cells.
FDD_RSCP_Threshold = FDD_RSCPmin min((P_MAX 21 dBm), 3
dB) if FDD_RSCPmin is broadcast in the serving cell system message;
otherwise,
FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10 dB
0= -20dB, 1= -6dB, 2= -18dB, 3= -8dB, 4= -16dB, 5= -10dB, 6= -14dB,
Description 7= -12dB.

Instance Cell

0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
Value Range and Step 7: -12dB

Unit N/A

Default Value [7,7]

2-1232

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason miderate number

The higher the Ec/Io mapped by parameter value, the harder the
Configuration Rule and relselection to 3G FDD;the lower the Ec/Io, the easier the relselection
Adjustment Suggestion to 3G FDD.The relation between parameter value and reselection is
not linearity.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1


Full Name FDD_QminPS Offset_0/FDD_QminPS Offset_1

Abbreviation fdd_Qmin_OffsetPs

Managed Object UTRAN Measurement

3GPP Name FDD_Qmin_Offset

3GPP Reference 3GPP TS 45.008

A one-dimensional array is used to represent packet idle state parameter


and packet transmission state parameter. To enable a UE to reselect
a 3G adjacent cell, the following conditions must be met for at least
5 seconds:
CPICH Ec/No > = FDD_ Qmin FDD_Qmin_Offset
CPICH RSCP > RLA_P(s+n) + _FDD_GPRS_Qoffset
CPICH RSCP > = FDD_RSCP_Threshold
The parameters FDD_GPRS_Qoffset, FDD_Qmin, and
FDD_Qmin_Offset are broadcast to the UE in the packet system
Description message PSI3quater.

2-1233

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

RLA_P(s+n) defines the average value of the signal strengths of the


serving cell and n strongest GSM neighbor cells.
FDD_RSCP_Threshold = FDD_RSCPmin min((P_MAX 21 dBm), 3
dB) if FDD_RSCPmin is broadcast in the serving cell system message;
otherwise, FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10
dB
0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, 4 = 8 dB, 5 = 10 dB, 6 = 12
dB, 7 = 14 dB.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [0,0]

Default Value
Configuration Reason offset is 0dB

If the offset value is higher, it is easier


Configuration Rule and
to handover to a 3G FDD cell during re-selection. If the offset value
Adjustment Suggestion
is lower, it is harder to handover to a 3G FDD cell during re-selection.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP


of UTRAN reselecting cell_1
PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
Full Name reselecting cell_1

2-1234

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation fdd_RscpMinPs

Managed Object UTRAN Measurement

3GPP Name FDD_RSCPmin

3GPP Reference 3GPP TS 45.008

This parameter defines the minimum RSCP threshold for a UTRAN


FDD cell to be reselected. It is broadcast to UEs in the packet system
message PSI3quater. A one-dimensional array is used to represent
packet idle state parameter and packet transmission state parameter.
To enable a UE to reselect a 3G adjacent cell, the following conditions
must be met for at least 5 seconds:
CPICH Ec/No > = FDD_ Qmin FDD_Qmin_Offset
CPICH RSCP > RLA_P(s+n) + _FDD_GPRS_Qoffset
CPICH RSCP > = FDD_RSCP_Threshold
The parameters DD_GPRS_Qoffset, FDD_Qmin, and FDD_Qmin_Offset
are broadcast to the UE in the packet system message PSI3quater.
RLA_P(s+n) defines the average value of the signal strengths of the
serving cell and n strongest GSM neighbor cells.
FDD_RSCP_Threshold = FDD_RSCPmin min((P_MAX 21 dBm), 3
dB) if FDD_RSCPmin is broadcast in the serving cell system message;
otherwise, FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10
dB
0 = -114 dBm, 1 = -112 dBm, 2 = -110 dBm, 3 = -108 dBm, 4 = -106
dBm, 5 = -104 dBm, 6 = -102 dBm, 7 = -100 dBm, 8 = -98 dBm, 9 = -96
dBm, 10 = -94 dBm, 11 = -92 dBm, 12 = -90 dBm, 13 = -88 dBm, 14 =
-86 dBm, 15 = -84 dBm. Note: The parameters in the formula are all
Description GPRS parameters, that is, the FDD_RSCPmin is FDD_RSCPminPS.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value [6,6]

Default Value reffer to FDD_RSCPmin, the signal strength of -102dBm is enough for
Configuration Reason UE stable work in FDD,

This parameter determines the minimum level


Configuration Rule and
for 3G FDD cell. It is harder to access the cells if the parameter
Adjustment Suggestion
is set higher. .

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

2-1235

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.19 Measurement report threshold of Ec/No or RSCP(PS)


Full Name Measurement report threshold of Ec/No or RSCP(PS)

Abbreviation fddRprtTho2Ps

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the frequency that adjacent cells report mea-
surement reports containing Ec/No or RSCP. As specified by REP_PRI-
ORITY, the reporting frequency of cells with the lowest priority level is low.
However, at least one Ec/No or RSCP must be reported in every four mea-
Description surement reports.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [0,0]

Default Value
Configuration Reason Protocol Recommended Value

Configuration Rule and Use the report measurement value that is recommended in the 3GPP
Adjustment Suggestion protocol.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1236

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.20 CS measurement reporting rate of adjacent cell


Full Name CS measurement reporting rate of adjacent cell

Abbreviation reportRateCs

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

NCC in BSIC of some GSM cells are allowed, but BCC is invalid (that is,
the radio system does not have adjacent cells corresponding to BCC).
This parameter indicates whether the system allows UE to report field
Description intensity of such cells (NCC is allowed but BCC us invalid).

Instance Cell

0: Normal
Value Range and Step 1: Lower

Unit N/A

Default Value 0

Default Value
Configuration Reason Usually an adjacent cell can have a same frequency.

Configuration Rule and


Adjustment Suggestion Not recommended to modify the parameter value.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1237

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.21 CS UE report invalid cell level allowed


Full Name CS UE report invalid cell level allowed

Abbreviation invldBsicRprtCs

Managed Object UTRAN Measurement

3GPP Name INVALID_BSIC_REPORTING

3GPP Reference 3GPP TS 45.008

NCC in BSIC of some GSM cells are allowed, but BCC is invalid (that is,
the radio system does not have adjacent cells corresponding to BCC).
This parameter indicates whether the system allows UE to report field
Description intensity of such cells (NCC is allowed but BCC us invalid).

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

BCC does not know the adjacent cell, which


Default Value
is not configured in BSC. The cell cannot be the target during handover
Configuration Reason
process.

Configuration Rule and


Adjustment Suggestion This parameter is not set as "Yes".

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

2-1238

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.22 MulBndRprtCS
Full Name MulBndRprtCS

Abbreviation mulBndRprtCs

Managed Object UTRAN Measurement

3GPP Name MULTIBAND_REPORTING

3GPP Reference 3GPP TS 45.008

This parameter is to control the number of reports of different adjacent


Description cells except the serving cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

In a dual-frequency environment, the parameter


Default Value can be set 0 to limit the traffic bearing, that is, the hand-in should
Configuration Reason base on the signal strength, and adjacent cells in different frequency
bands should be treat with a same priority.

In a dual-frequency environment, the 900M cells


can be set to report as many 1800M cells as possible to make the
Configuration Rule and handover
Adjustment Suggestion conducted in 1800M frequency. This configuration is good to balance
the traffic and lower and reduce congestion. However, the success
ratio of handover, call drop ratio and coverage ratio might be affected.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

2-1239

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.23 CS offset which is added when UE reports rxlev value


Full Name CS offset which is added when UE reports rxlev value

Abbreviation scaleOrdCs

Managed Object UTRAN Measurement

3GPP Name SCALE_ORD

3GPP Reference 3GPP TS 45.008

This parameter indicates the offset to be added when UE reports signal


field strength. If the actual field strength of a GSM adjacent cell is only
n dBm, the UE maps n+ ScaleOrdCS to the value that n shall map to
when mapping to RXLEV063. This is applicable only when the
"enhanced measurement report" message is used.
If the signal strength of the adjacent cell exceeds -48 dBm, the system
can use this parameter to report the actual value and the UE reports
the SCALE value in the "enhanced measurement report" message. If
SCALE_ORD=2, the UE uses a value that is just sufficient for reporting
Description the cell with the strongest signal level.

Instance Cell

0: 0 dB
1: 10 dB
Value Range and Step 2: Automatic

Unit N/A

Default Value 0

Default Value
Configuration Reason Values other than 0 can be used.

Configuration Rule and This parameter can be set 1 or 2 to view the


Adjustment Suggestion real level.

2-1240

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.24 GSM900M Adjacent cell reporting signal level Offset


Full Name GSM900M Adjacent cell reporting signal level Offset

Abbreviation rprtOffsetCs900

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Description An offset can be added to a 900 M GSM adjacent cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to GSM900M adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

2-1241

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.25 GSM900M Adjacent cell reporting signal level Threshold


Full Name GSM900M Adjacent cell reporting signal level Threshold

Abbreviation rprtThoCs900

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

The GSM 900 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS900 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
Whether it can be reported in certain period depends on signal level,
Description RepPrioCS, MulBndRprtCS and RprtOffsetCS900.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value The measurement value is not limited during


Configuration Reason the report of GSM 900 M adjacent cells.

If more GSM 900 M adjacent cells need to be


Configuration Rule and
reported, the threshold should be set low; otherwise it should be
Adjustment Suggestion
set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

2-1242

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.26 GSM1800M Adjacent cell reporting signal level Offset


Full Name GSM1800M Adjacent cell reporting signal level Offset

Abbreviation rprtOffsetCs1800

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Description An offset can be added to a 180000 M GSM adjacent cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to GSM900M adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

2-1243

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.27 GSM1800M Adjacent cell reporting signal level Threshold


Full Name GSM1800M Adjacent cell reporting signal level Threshold

Abbreviation rprtThoCs1800

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

The GSM 1800 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS1800 (dimensionless, cor-
responding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV). As to whether it can be reported in cer-
tain period, it also depends on signal level, RepPrioPS, MulBndRprtPS
Description and RprtOffsetPS900.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value The measurement value is not limited during


Configuration Reason the report of GSM 1800 M adjacent cells.

If more GSM 1800 M adjacent cells need to be


Configuration Rule and
reported, the threshold should be set low; otherwise it should be
Adjustment Suggestion
set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

2-1244

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.28 GSM1900M Adjacent cell reporting signal level Offset


Full Name GSM1900M Adjacent cell reporting signal level Offset

Abbreviation rprtOffsetCs1900

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Description An offset can be added to a 1900 M GSM adjacent cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to GSM900M adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

2-1245

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.29 GSM1900M Adjacent cell reporting signal level Threshold


Full Name GSM1900M Adjacent cell reporting signal level Threshold

Abbreviation rprtThoCs1900

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

The GSM 1900 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS1900 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
As to whether it can be reported in certain period, it also depends on
Description signal level, RepPrioCS, MulBndRprtCS and RprtOffsetCS1900.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value The measurement value is not limited during


Configuration Reason the report of GSM 1900 M adjacent cells.

If more GSM 1900 M adjacent cells need to be


Configuration Rule and
reported, the threshold should be set low; otherwise it should be
Adjustment Suggestion
set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1246

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset


Full Name UTRAN/FDD Adjacent cell reporting signal level Offset

Abbreviation fddRprtOffsetCs

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

An offset can be added to an FDD adjacent cell when the priority sequence
Description of the hand-in adjacent cells are determined.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to FDD adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1247

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold


Full Name UTRAN/FDD Adjacent cell reporting signal level Threshold

Abbreviation fddRprtThoCs

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

When reporting to UTRAN/FDD adjacent cells, only when signal level in


the cell is higher than or equal to FDDRprtThoCS (dimensionless, cor-
responding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. As to whether it can
be reported in certain period, it also depends on signal level, RepPrioCS,
Description FDDMulRatRrptCS and FDDRprtOffsetCS.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason FDD

Configuration Rule and If more FDD adjacent cells are needed, the
Adjustment Suggestion threshold should be set low; otherwise it should be set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1248

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.27.32 Reporting threshold for the Ec/No or RSCP that is not


reported
Full Name Reporting threshold for the Ec/No or RSCP that is not reported

Abbreviation fddRprtTho2CS

Managed Object UTRAN Measurement

3GPP Name FDD_REPORTING_THRESHOLD_2

3GPP TS 44.018
3GPP Reference 3GPP TS 45.008

This parameter is a new phase-II GSM/WCDMA interoperation


parameter, indicating the measurement report threshold of Ec/No or
RSCP that do not need to be reported.
In phase-I GSM/WCDMA interoperation, MSs are only required to report
the measurement result of Ec/NO or signal strength (RSCP). In phase-II,
MSs are required to consider both measurement results.
When it is requested that the class of reported quantities of 3G adjacent
cells is RSCP, this parameter indicates the threshold of Ec/No that needs
not be reported. Based on the parameter, the system excludes the
Description adjacent cells whose RSCP does not meet the requirement.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

The default type that is required to report


Default Value
by MS is Ec/No, so the default value is the RSCP measurement report
Configuration Reason
threshold that is not required to be reported.

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion measurement type reported by the MS.

Change Mode Offline

Related features ZGO-02-03-009 GSM/WCDMA Interworking Phase II

Related Parameters FDDRepQntCS

If FDDRepQntCS is 0, this parameter indicates the Ec/No threshold


value that does not need to be reported;
Relationship
If FDDRepQntCS is 1, this parameter indicates the Ec/No threshold
value that does not need to be reported;

2-1249

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame


indication
Full Name CS UE search UTRAN adjacent cell in BSIC decoding frame indication

Abbreviation searchPrioCs3g

Managed Object UTRAN Measurement

3GPP Name 3G_SEARCH_PRIO

3GPP Reference 3GPP TS 45.008

This parameter indicates whether to allow UE to search UTRAN adjacent


cells in the frame where BSIC decoding is needed. If allowed, UE can
Description use at most 25 frames for search in 13 seconds.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason Searching for GSM adjacent cells.

Configuration Rule and If a user is expected to stay in 3G network,


Adjustment Suggestion this parameter should be set as "Yes".

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

2-1250

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.34 GSM850M Adjacent cell reporting signal level Threshold


Full Name GSM850M Adjacent cell reporting signal level Threshold

Abbreviation rprtThoCs850

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

The GSM 850 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS850 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
Whether it can be reported in certain period depends on signal level,
Description RepPrioCS, MulBndRprtCS and RprtOffsetCS850.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value The measurement value is not limited during


Configuration Reason the report of GSM 850 M adjacent cells.

If more GSM 850 M adjacent cells need to be


Configuration Rule and
reported, the threshold should be set low; otherwise it should be
Adjustment Suggestion
set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

2-1251

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.35 GSM850M Adjacent cell reporting signal level Offset


Full Name GSM850M Adjacent cell reporting signal level Offset

Abbreviation rprtOffsetCs850

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Description An offset can be added to a 850 M GSM adjacent cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to GSM850M adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1252

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.36 TDD reselection offset


Full Name TDD reselection offset

Abbreviation tdd_Qoffset

Managed Object UTRAN Measurement

3GPP Name TDD_Qoffset

3GPP Reference 3GPP TS 45.008

This parameter indicates the RSCP threshold when the an MS is handed-


Description over to a 3G TDD cell.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 8

Default Value When the RSCP of a TDD cell is -81 dBm, the
Configuration Reason signals are strong.

Configuration Rule and This parameter can be set lower if the cell
Adjustment Suggestion re-selection to a TDD cell is expected to be easier.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1253

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.27.37 CS MAX number of UTRAN/TDD adjacent cells in


measurement report
Full Name CS MAX number of UTRAN/TDD adjacent cells in measurement report

Abbreviation tddMulRatRrptCs

Managed Object UTRAN Measurement

3GPP Name XXX_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 45.008

This parameter indicates the maximum number of UTRAN/TDD adjacent


cells included in measurement report or strongest cell list. If UTRAN/TDD
adjacent cells are not full, the vacancies are used for GSM adjacent cells
Description (If FDD technology is supported, remained part is given to FDD cell).

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason Hand in 2 TDD adjacent cells for selection.

Configuration Rule and If a user is expected to stay in TDD network,


Adjustment Suggestion the parameter can be set higher.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1254

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset


Full Name UTRAN/TDD Adjacent cell reporting signal level Offset

Abbreviation tddRprtOffsetCs

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

An offset can be added to an TDD adjacent cell when the priority sequence
Description of the hand-in adjacent cells are determined.

Instance Cell

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value No configuration on the frequency bands and


Configuration Reason access technologies.

Configuration Rule and This parameter should be set higher if more


Adjustment Suggestion handovers to FDD adjacent cells are expected to be conducted.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1255

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold


Full Name UTRAN/TDD Adjacent cell reporting signal level Threshold

Abbreviation tddRprtThoCs

Managed Object UTRAN Measurement

3GPP Name XXX_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

When reporting to UTRAN/TDD adjacent cells, only when signal level in


the cell is higher than or equal to TDDRprtThoCS (dimensionless, cor-
responding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. Whether it can be
reported in certain period depends on signal level, RepPrioCS, TDDMul-
Description RatRrptCS and TDDRprtOffsetCS.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value The measurement value is not limited during


Configuration Reason the report of TDD adjacent cells.

Configuration Rule and If more TDD adjacent cells need to be reported,


Adjustment Suggestion the threshold should be set low; otherwise it should be set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1256

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.40 PS measurement type reported by UE


Full Name PS measurement type reported by UE

Abbreviation reportTypePs

Managed Object UTRAN Measurement

3GPP Name REPORT_TYPE

3GPP Reference 3GPP TS 44.060

This parameter is used to indicate whether an MS uses the PACKET


MEASUREMENT REPORT or PACKET ENHANCED MEASUREMENT
REPORT messages for (NC) reporting. It is reported to the MS in
the PACKET CELL CHANGE ORDER or PACKET MEASUREMENT
ORDER
message.
0: If each frequency point in the BA (GPRS) list is configured with at least
one BSIC, PACKET ENHANCED MEASUREMENT REPORT is used
to report measurement result; otherwise, PACKET MEASUREMENT
REPORT is used.
1: PACKET MEASUREMENT REPORT is used to report measurement
Description result.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value normally use PACKET MEASUREMENT REPORT, defaut value is 1 in


Configuration Reason 3GPP, so the default value should be changed to 1.

At least one BSIC is allocated for each frequency


point, and MS has received the BSIC from all adjacent cells. If the
measurement type parameter ReportTypePS is 0, MS will use the
Configuration Rule and
enhanced
Adjustment Suggestion
measurement report to measure the adjacent cell. If the above conditions
are not met, it is recommended to set the parameter as 1, using the
common measurement report.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1257

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.41 PS number of same frequency adjacent cells in report


Full Name PS number of same frequency adjacent cells in report

Abbreviation svrBandRprtPs

Managed Object UTRAN Measurement

3GPP Name SERVING_BAND_REPORTING

3GPP Reference 3GPP TS 45.008

The number of cells from the GSM serving frequency band that shall be
Description included in the measurement report.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason refer to parameter SvrBandRpt

Configuration Rule and Refer to the CS configuration principle of


Adjustment Suggestion reported number of adjacent cells in a same frequency.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

2-1258

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.42 PS class of reported quantities of UTRAN adjacent cells


Full Name PS class of reported quantities of UTRAN adjacent cells

Abbreviation fddRepQntPs

Managed Object UTRAN Measurement

3GPP Name FDD_REP_QUANT

3GPP Reference 3GPP TS 45.008

Description Indicates the reporting quantity for UTRAN FDD cells.0 = RSCP, 1 = Ec/No

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason refer to the FDDRepQntCS

If a UE is expected to report with RSCP, the


Configuration Rule and
parameter should be set 0; if a UE is expected to report with Ec/Io,
Adjustment Suggestion
the parameter should be set 1.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1259

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.43 PS max number of UTRAN/FDD adjacent cells in


measurement report
Full Name PS max number of UTRAN/FDD adjacent cells in measurement report

Abbreviation fddMulRatRrptPs

Managed Object UTRAN Measurement

3GPP Name FDD_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 45.008

The number of cells from the access technology/mode FDD (one or more)
that shall be included in the list of strongest cells or in the measurement
Description report.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason refer to the FDDMulRatrrptCS

Configuration Rule and The parameter should be set higher if a UE


Adjustment Suggestion is expected to stay in FDD network.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1260

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.44 PS measurement reporting rate of adjacent cell


Full Name PS measurement reporting rate of adjacent cell

Abbreviation reportRatePs

Managed Object UTRAN Measurement

3GPP Name REPORTING_RATE

3GPP Reference 3GPP TS 45.008

Indicates the allowed reporting rate.0 = normal, 1 = reduced.


Description Default value = normal.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason normal reporting rate, defaut value in 3GPP

Usually every adjacent cell is treated with


Configuration Rule and the same priority. When the adjacent cells with low priority need
Adjustment Suggestion hand-in in low frequency, the parameter ReportRatePS should be set
1.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters RepPrioPS

The parameter RepPrioPS configures every adjacent


cell; the parameter RepRatePS configures the current cell. The two
Relationship
parameters determines the measurement report hand-in frequency in
the adjacent cell.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1261

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.45 PS UE report invalid cell level allowed


Full Name PS UE report invalid cell level allowed

Abbreviation invldBsicRprtPs

Managed Object UTRAN Measurement

3GPP Name INVALID_BSIC_REPORTING

3GPP Reference 3GPP TS 45.008

Indicates if GSM cells with invalid BSIC and allowed NCC part may be
reported.0 Report on cells with invalid BSIC and allowed NCC part of
BSIC is not allowed.
1 Report on cells with invalid BSIC and allowed NCC part of BSIC is
Description allowed. In this case NCC_PERMITTED is required.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

BCC does not know the adjacent cell, which


Default Value
is not configured in BSC. The cell cannot be the target during handover
Configuration Reason
process.

Configuration Rule and


Adjustment Suggestion It is recommended to set as "No".

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1262

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.46 PS multi-band report indication


Full Name PS multi-band report indication

Abbreviation mulBndRprtPs

Managed Object UTRAN Measurement

3GPP Name MULTIBAND_REPORTING

3GPP Reference 3GPP TS 45.008

MS in single-frequency GSM system needs only to report contents of


six adjacent cells with the strongest signals in a frequency band, when
reporting the survey result of adjacent cells to the network.
In multi-band networking, MS can enter with priority into a specific
frequency band during handover. The MS reports the survey result
according to the signal intensity and the frequency band of the signals,
according to the actual situation.
PS multiband report indication is used to notify MS to report contents
of adjacent cells in multiple frequency bands. It is one of the system
control parameters.
The setting of this parameter is subject to traffic in each frequency band.
General principles to set the parameters are as follows: 0: If the traffic
of each frequency band is almost equivalent, and the operator has
no choice over the frequency band. 3: If the traffic of each frequency
band is quite different, and the operator hopes that MS enters a specific
Description frequency band with priority.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 0

Default Value
Configuration Reason according to signal strength, all frequency bands are in same level

If hope to report some number of neighbour cells in each frequency


band, the paremeter should be value except 0.In 900M/1800M network,
the parameter should be 3 of 900M cells and 1 of 1800M cells in order to
Configuration Rule and
absorb traffic in 1800M cells;If not hope some frequency band to absorb
Adjustment Suggestion
traffic, the parameter value should be 0.Reasonable configuration this
parameter can abtain traffic balance and avoid congestion, but may
effect establish successful rate, drop rate and coverage.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

2-1263

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.47 PS offset which is added when UE reports RXLEV value


Full Name PS offset which is added when UE reports RXLEV value

Abbreviation scaleOrdPs

Managed Object UTRAN Measurement

3GPP Name SCALE_ORD

3GPP Reference 3GPP TS 45.008

This parameter SCALE_ORD indicates the offset used for the reported
RXLEV values in the PACKET ENHANCED MEASUREMENT REPORT
message.
The signal level shall be mapped to an RXLEV value between 0 and
63, as follows:
RXLEV 0 = less than 110 dBm + SCALE.
RXLEV 1 = 110 dBm + SCALE to 109 dBm + SCALE.
RXLEV 2 = 109 dBm + SCALE to 108 dBm + SCALE.
:
:
RXLEV 62 = 49 dBm + SCALE to 48 dBm + SCALE.
RXLEV 63 = greater than 48 dBm + SCALE.
where, SCALE is defined by the SCALE_ORD parameter in the PACKET
CELL CHANGE ORDER and PACKET MEASUREMENT ORDER
messages.
The MS indicates the SCALE value to be used in the PACKET
ENHANCED MEASUREMENT REPORT message.
If the actual field strength of a GSM adjacent cell is only n dBm, the UE
maps n+ SCALE_ORD to the value that n shall map to when mapping
to RXLEV063. This is applicable only when the PACKET
Description ENHANCED MEASUREMENT REPORT message is used.

2-1264

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If the signal strength of the adjacent cell exceeds -48 dBm, the system
can use this parameter to report the actual value and the UE reports the
SCALE value in the PACKET ENHANCED MEASUREMENT REPORT
message. If SCALE_ORD=2, the UE uses a minimum offset, which is
sufficient for reporting the cell with the strongest signal level.

Instance Cell

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value used in the ENHANCED MEASUREMENT REPORT and PACKET


Configuration Reason ENHANCED MEASUREMENT REPORT

When each frequency point is allocated with a BSIC at least, the MS


has received all adjacent cells' BSIC, and the ReportTypePS parameter
is 0, the MS uses the enhanced measurement report, to measure the
adjacent cell more accurately.
The value 0 indicates that there is no offset, and the reported
measurement result is mapped in accordance with the actual level.
The value 1 indicates that the offset is 10 dB, the range of the level to be
Configuration Rule and reported is adjusted as -100 dB to -38 dB. That is, the level value mapped
Adjustment Suggestion to 0~63 increases by 10 dB, which suits for high adjacent cell level.
The value 2 indicates that SCALE value is the minimum offset value that
can be reported in the strongest adjacent cell. For example, if the signal
strength in the strongest adjacent cell is -30dB, the SCALE value is 18,
to ensure that all adjacent cells can ba mapped to be reported.
In general, the value is 0 when there is no need for an offset. The value
can be adjusted as 1 or 2 as required for the adjacent cell with special
signal strength.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1265

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.27.48 GSM 900 Offset(PS)


Full Name GSM 900 Offset(PS)

Abbreviation rprtOffsetPs900

Managed Object UTRAN Measurement

3GPP Name 900_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Apply en offset to the reported value when prioritising the cells for report-
Description ing for GSM frequency band 900.0, 6, , 42 dB Default value = 0 dB.

Instance Cell

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1266

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.49 GSM 900 Threshold(PS)


Full Name GSM 900 Threshold(PS)

Abbreviation rprtThoPs900

Managed Object UTRAN Measurement

3GPP Name 900_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

Apply priority reporting if the reported value is above threshold for GSM
frequency band 900.0, 6, , 36, (never).
Description Default value = always.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.50 GSM 1800 Offset(PS)


Full Name GSM 1800 Offset(PS)

2-1267

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation rprtOffsetPs1800

Managed Object UTRAN Measurement

3GPP Name 1800_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Apply en offset to the reported value when prioritising the cells for report-
Description ing for GSM frequency band 1800.0, 6, , 42 dB Default value = 0 dB.

Instance Cell

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.51 GSM 1800 Threshold(PS)


Full Name GSM 1800 Threshold(PS)

Abbreviation rprtThoPs1800

Managed Object UTRAN Measurement

3GPP Name 1800_REPORTING_THRESHOLD

2-1268

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

Apply priority reporting if the reported value is above threshold for GSM
frequency band 1800.0, 6, , 36, (never).
Description Default value = always.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.52 GSM 1900 Offset(PS)


Full Name GSM 1900 Offset(PS)

Abbreviation rprtOffsetPs1900

Managed Object UTRAN Measurement

3GPP Name 1900_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

Apply en offset to the reported value when prioritising the cells for report-
Description ing for GSM frequency band 1900.0, 6, , 42 dB Default value = 0 dB.

2-1269

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.53 GSM 1900 Threshold(PS)


Full Name GSM 1900 Threshold(PS)

Abbreviation rprtThoPs1900

Managed Object UTRAN Measurement

3GPP Name 1900_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

Apply priority reporting if the reported value is above threshold for GSM
frequency band 1900.0, 6, , 36, (never).
Description Default value = always.

Instance Cell

Value Range and Step 0..7

2-1270

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.54 UTRAN/FDD Offset


Full Name UTRAN/FDD Offset

Abbreviation fddRprtOffsetPs

Managed Object UTRAN Measurement

3GPP Name FDD_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter indicates the offset for the reported value when UTRAN
FDD sorts cells. It is sent to MSs in the PACKET MEASUREMENT OR-
DER or PACKET CELL CHANGE ORDER message over PACCH. When
the system reports UTRAN/FDD neighbor cells, if there are two cells with
signals greater than or equal to FDDRprtThoPS and the RepPrioPS val-
ues are the same, then the cell whose sum value of signal level and FD-
Description DRprtOffsetPS is greater is reported in priority.

Instance Cell

2-1271

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.55 UTRAN/FDD Threshold


Full Name UTRAN/FDD Threshold

Abbreviation fddRprtThoPs

Managed Object UTRAN Measurement

3GPP Name FDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

2-1272

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates the UTRAN FDD measurement report threshold.


It is broadcast to MSs in the PACCHPACKET MEASUREMENT OR-
DER or PACKET CELL CHANGE ORDER message over PACCH. When
reporting to UTRAN/FDD adjacent cells, only when signal level in the cell
is higher than or equal to FDDRprtThoPS (dimensionless, corresponding
to RXLEV portion in measurement report, different mapping relationship
for different RXLEV), it can be reported. As to whether it can be reported
in certain period, it also depends on signal level, RepPrioPS, FDDMulRa-
Description tRrptPS and FDDRprtOffsetPS.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame


indication
Full Name PS UE search UTRAN adjacent cell in basic decoding frame indication

Abbreviation searchPrioPs3g

2-1273

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object UTRAN Measurement

3GPP Name 3G_SEARCH_PRIO

3GPP Reference 3GPP TS 45.008

This parameter indicates whether UEs are allowed to search for UTRAN
neighbor cells when BSIC decoding is required. If UTRAN neighbor cell
search is allowed, a UE can use a maximum of 25 frames to search for
UTRAN neighbor cells within 13 seconds.
This parameter is sent to UEs through a PACKET MEASUREMENT
ORDER or PACKET CELL CHANGE ORDER message on PACCH.
0: No
Description 1: Yes

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason refer to CS parameter SearchPrioPS3G

Configuration Rule and If a user is expected to stay in 3G network,


Adjustment Suggestion this parameter should be set as "Yes".

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1274

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.57 GSM 850 Threshold(PS)


Full Name GSM 850 Threshold(PS)

Abbreviation rprtThoPs850

Managed Object UTRAN Measurement

3GPP Name 850_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

This parameter indicates a threshold for reporting GSM 850 M neighbor


cells. It is sent to MSs through a PACKET MEASUREMENT ORDER or
PACKET CELL CHANGE ORDER message on PACCH.
A GSM 850 M neighbor cell can be reported only when the signal level
in the cell is equal to or greater than RprtThoPS850. The signal level (no
dimension) corresponds to the RXLEV part in a measurement report.
Different RXLEV values have different mapping relationships. Whether
the GSM 850 M neighbor cell is reported in a specific period depends on
Description the signal level, RepPrioPS, MulBndRprtPS, and RprtOffsetPS850.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1275

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.58 GSM 850 Offset(PS)


Full Name GSM 850 Offset(PS)

Abbreviation rprtOffsetPs850

Managed Object UTRAN Measurement

3GPP Name 850_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter specifies an offset for sorting GSM 850 M neighbor cells
to be reported. It is sent to MSs through a PACKET MEASUREMENT
ORDER or PACKET CELL CHANGE ORDER message on PACCH.
If the signal levels of two GSM 850 M neighbor cells are equal to or
greater than RprtThoPS850, and their RprtThoPS850 values are equal,
the cell with the greater sum of signal level and RprtOffsetPS850 is
Description reported first.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1276

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.59 TDD multi report PS


Full Name TDD multi report PS

Abbreviation tddMulRatRrptPs

Managed Object UTRAN Measurement

3GPP Name TDD_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 45.008

This parameter specifies the maximum number of UTRAN/TDD neighbor


cells in PS measurement reports or the list of strongest cells. It is sent to
MSs through a PACKET MEASUREMENT ORDER or PACKET CELL
CHANGE ORDER message on PACCH.
If the actual number of UTRAN/TDD neighbor cells does not reach the
maximum number, the remaining quota is reserved for GSM neighbor
cells. (If the system supports FDD, the remaining quota is reserved for
Description FDD cells when there is still remaining.)

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason refer to the TDDMulRatrrptCS

Configuration Rule and The parameter should be set higher if a UE


Adjustment Suggestion is expected to stay in TDD network.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1277

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.27.60 UTRAN/TDD Offset


Full Name UTRAN/TDD Offset

Abbreviation tddRprtOffsetPs

Managed Object UTRAN Measurement

3GPP Name TDD_REPORTING_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter indicates the offset for the reported value when UTRAN
TDD sorts cells. It is sent to MSs in the PACKET MEASUREMENT OR-
DER or PACKET CELL CHANGE ORDER message over PACCH. When
the system reports UTRAN/TDD neighbor cells, if there are two cells with
signals greater than or equal to TDDRprtThoPS and the RepPrioPS val-
ues are the same, then the cell whose sum value of signal level and TD-
Description DRprtOffsetPS is greater is reported in priority.

Instance Cell

Value Range and Step 0..7

Unit dB

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and It is easier to be chosen for measurement report


Adjustment Suggestion hand-in if the value is bigger.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1278

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.27.61 UTRAN/TDD Threshold


Full Name UTRAN/TDD Threshold

Abbreviation tddRprtThoPs

Managed Object UTRAN Measurement

3GPP Name TDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 45.008

This parameter indicates a singal level threshold for reporting


UTRAN TDD neighbor cells. It is sent to MSs through a PACKET
MEASUREMENT ORDER or PACKET CELL CHANGE ORDER
message on PACCH.
A UTRAN TDD neighbor cell can be reported only when the signal level
in the cell is equal to or greater than TDDRprtThoPS. The signal level
(no dimension) corresponds to the RXLEV part in a measurement report.
Different RXLEV values have different mapping relationships. Whether
the UTRAN TDD neighbor cell is reported in a specific period depends on
Description the signal level, RepPrioPS, TDDMulRatRrptPS, and TDDRprtOffsetPS.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP

Configuration Rule and A cell is easier to be chosen for measurement


Adjustment Suggestion report if the value is smaller and vice versa.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

2-1279

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.27.62 Reselect priority control of 2G/3G


Full Name Reselect priority control of 2G/3G

Abbreviation serviceCc

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the priority control mode for 2G/3G cell
reselection.
Value range: 0-5
0: Reselecting 3G cells first
1: Not reselecting 3G cells first
2: Reselection to 3G cells not allowed
3: The priority depends on SGSN (default: reselecting 3G cells first)
4: The priority depends on SGSN (default: not reselecting 3G cells first)
5: The priority depends on SGSN (default: reselection to 3G cells not
allowed)
This parameter is valid when Network Controlled Cell Reselection
Description (NCCR) is enabled with NC2Support=1 and NMO=1 (NC2).

Instance Cell

0:3G re-selection preferred


1:3G re-selection not preferred
2:3G re-selection not allowed
3:Based on the information from SGSN,3G re-selection preferred by
default
4:Based on the information from SGSN,3G re-selection not preferred by
default
5:Based on the information from SGSN,3G re-selection not allowed by
Value Range and Step default

Unit N/A

Default Value 0

Default Value Usually PS services for 3G are better than


Configuration Reason those for 2G.

Configuration Rule and Adjust according to 2/3G inter-working strategy


Adjustment Suggestion (3G preferred, or 2G preferred).

Change Mode Offline

2-1280

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.63 Max Number In Adjacent GSM cell


Full Name Max Number In Adjacent GSM cell

Abbreviation indexStartEmr

Managed Object UTRAN Measurement

3GPP Name Absolute_Index_Start_EMR

3GPP Reference 3GPP TS 44.018

Description This parameter indicates the maximum number of GSM adjacent cells.

Instance Cell

Value Range and Step 32..64

Unit N/A

Default Value 32

Default Value
Configuration Reason Usually 32 adjacent cells are enough.

This parameter should be set according to the


Configuration Rule and
radio network planning. It is set 32 or more just when more than 32
Adjustment Suggestion
adjacent cells are needed.

Change Mode Offline

Related features ZGB-02-02-004 Support 64 Neighboring Cells

Related Parameters N/A

Relationship N/A

2-1281

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.64 A minimum threshold of RSCP for UTRAN FDD cell


re-selection
Full Name A minimum threshold of RSCP for UTRAN FDD cell re-selection

Abbreviation fdd_RscpMin

Managed Object UTRAN Measurement

3GPP Name FDD_RSCPmin

3GPP Reference 3GPP TS 45.008

When this parameter is being broadcast in the system messages, RSCP


threshold in FDD cell re-selection is FDD_RSCPmin min((P_MAX
21 dBm), 3 dB). P_MAX is the maximum transmission power of an MS
under FDD mode.
This parameter is broadcast to MS through SI2quater on BCCH, and is
Description broadcast to MS through PSI3quater on PBCCH and PACCH.

Instance Cell

Value Range and Step 0..15

Unit dBm

Default Value 6

Default Value
Configuration Reason Under FDD mode, -102 dB RSCP is enough.

Configuration Rule and If this parameter is set lower, it is easier


Adjustment Suggestion for MS to handover to FDD cell during cell re-selection.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

2-1282

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.65 Applies an offset to FDD_Qmin value


Full Name Applies an offset to FDD_Qmin value

Abbreviation fdd_Qmin_Offset

Managed Object UTRAN Measurement

3GPP Name FDD_Qmin_Offset

3GPP Reference 3GPP TS 45.008

This parameter indicates the FDD_Qmin parameter offset. When FDD


adjacent cell re-selection is being conducted, the Ec/No (code-noise ratio)
Description is high than or equal to FDD_Qmin - FDD_Qmin_Offset.

Instance Cell

Value Range and Step 0..7

Unit db

Default Value 0

Default Value FDD_Qmincan be indicates the Ec/No requirement


Configuration Reason for FDD adjacent cell re-selection.

Configuration Rule and If a 3G adjacent cell is expected to be selected,


Adjustment Suggestion this parameter should be set high.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces Um interface

2-1283

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.66 Service UTRAN CCO support


Full Name Service UTRAN CCO support

Abbreviation utranCcoSupp

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether 2G/3G priority control policy is applied


during PS reselection/handover. The priority control policy is defined
through the parameter CCOStrategy and negotiated by BSC and SGSN,
as shown in the following table:
2G/3G Priority Control Policy
3G reselection/handover preferred 2G reselection/handover preferred
3G reselection/handover forbidden
3G reselection/handover preferred 3G reselection/handover preferred
3G reselection/handover preferred 3G reselection/handover forbidden
2G reselection/handover preferred 2G reselection/handover preferred
2G reselection/handover preferred 3G reselection/handover forbidden
3G reselection/handover forbidden 3G reselection/handover forbidden
3G reselection/handover forbidden 3G reselection/handover forbidden
Object to SGSN, 3G reselection/handover preferred by default, value
on SGSN is used, if SGSN has no Service UTRAN CCO, default value
on BSC is used.
Object to SGSN, 2G reselection/handover preferred by default
Description Object to SGSN, 3G reselection/handover forbidden by default

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

2-1284

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

This parameter is enabled if the 2/3G interworking


Configuration Rule and for GPRS is needed. Otherwise, it is disabled. This function is related
Adjustment Suggestion to the function of NCCR and PS. Currently, it is recommended not to
enable this function.

Change Mode Offline

Related features ZGO-02-03-004 Inter-system NCCR

Related Parameters PSUTRANCCOSupp

Relationship After BSCPSUTRANCCOSupp is enabled, this parameter is valid.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.27.67
Signal strength and load and
capacity priority
Signal strength and load and
Full Name capacity priority

Abbreviation StrenLoadCapaPri

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

Description Signal strength and load and capacity priority

Instance Cell

Value Range and Step 0..2

2-1285

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value Unless otherwise specified, the signal strength


Configuration Reason is used as the reselection judgment condition.

It is required to configure this parameter


Configuration Rule and
according operator requirements. For balance based on load, select
Adjustment Suggestion
1. For balance based on capacity, select 2..

Change Mode Offline

Related features N/A

Related Parameters NC2For23G

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.27.68 Signal strength threshold


Full Name Signal strength threshold

Abbreviation StrenThr

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

2-1286

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter specifies the signal strength threshold of a 3G cell for


3G cell reselection. When the signal strength in a 3G cell is greater than
this threshold, this cell can be reselected during cell reselection. The
following provides the mapping relationships between the parameter
values and signal strengths.
0: -105dBm
1: -102dBm
2: -99dBm
3: -96dBm
4: -93dBm
5: -90dBm
6: -87dBm
7: -84dBm
8: -81dBm
9: -78dBm
10: -75dBm
11: -72dBm
12: -69dBm
13: -66dBm
14: -63dBm
Description 15: -60dBm

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

Default Value In the case of normal UE access, use the lowest


Configuration Reason signal strength.

When there are high requirements on the signal


Configuration Rule and strength in the reselected target 3G cell of the UE, it is recommended
Adjustment Suggestion that this parameter be configured relatively large. Otherwise, lower
this value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1287

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.27.69 Load threshold


Full Name Load threshold

Abbreviation LoadThr

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

This parameter determines the threshold of maximum access load for the
3G cell that is reselected to the 3G adjacent cell. If the load is lower than
Description this threshold, the value is acceptable.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 60

According to the load balancing principle,


Default Value
the cell load cannot be excessively high after the UE is reselected
Configuration Reason
to a 3G cell.

It is required to configure the expected load


that can be acceptable by the target 3G cell. If the 2G PS service
Configuration Rule and
is busy, this parameter can be configured relatively high when the
Adjustment Suggestion
3G service is not congested. This facilitates the UE to be reselected
to the 3G cell. On the contrary, lower the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1288

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.27.70 Available capacity threshold


Full Name Available capacity threshold

Abbreviation CapaThr

Managed Object UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

This parameter determines the threshold of remaining access capacity


for the 3G cell that is reselected to the 3G adjacent cell. If the remaining
Description access capacity is higher than this threshold, the value is acceptable.

Instance Cell

Value Range and Step 1..100

Unit %

Default Value 40

According to the load balancing principle,


Default Value
number of subscribers accessed by a cell cannot be excessively low
Configuration Reason
after the UE is reselected to the 3G cell.

It is required to configure the expected remaining


access capacity that can be acceptable by the target 3G cell. If the
Configuration Rule and
2G PS service is busy, this parameter can be configured relatively
Adjustment Suggestion
low when the 3G service is not congested. This facilitates the UE
to be reselected to the 3G cell. On the contrary, increase the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

2-1289

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Measurement

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.28 E-UTRAN Measurement(GEutranMeasure)


2.28.1 E-UTRAN Measurement ID
Full Name E-UTRAN Measurement ID

Abbreviation GEutranMeasure

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference N/A

Description E-UTRAN Measurement ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1290

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.28.2 Initial parameter instead of qsearch_c before UE receiving


qsearch_C
Full Name Initial parameter instead of qsearch_c before UE receiving qsearch_C

Abbreviation qsearchCInit

Managed Object E-UTRAN Measurement

3GPP Name Qsearch_C_E-UTRAN_Initial

3GPP Reference N/A

This parameter indicates the parameter used before the QSearchC pa-
rameter is acquired. If the value of this parameter ranges from 0 to 7,
the system searches EUTRAN adjacent cells when the signal strength is
lower than that corresponding to the value. If the value of this parameter
ranges from 8 to 15, the system searches EUTRAN cells when the UE
Description signal strength is higher than that corresponding to the value.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 7

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1291

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.28.3
Class of reported quantities of E-UTRAN adjacent cells
Full Name Class of reported quantities of E-UTRAN adjacent cells

Abbreviation repQuant

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_REP_QUANT

3GPP Reference 3GPP TS 44.018

This parameter determines the type of LTE adjacent cells reported in the
Description measurement report.

Instance Cell

0: RSRP(RSRP)
Value Range and Step 1: RSRQ(RSRQ)

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1292

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.28.4 Max number of E-UTRAN adjacent cells in measurement


report
Full Name Max number of E-UTRAN adjacent cells in measurement report

Abbreviation mulRatRrpt

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 44.018

This parameter determines the maximum number of LTE adjacent cells


(GPRS) supported in the measurement report or the list of cells with the
Description strongest signal strength.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

2-1293

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit


Full Name FDD Measurement report threshold of RSRP or RSRQ in 6-bit

Abbreviation fddRptthresh

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(specified in RepQuant) measurement reports when the type of FDD mea-
Description surement report is 6-bit.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

2-1294

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.28.6 FDD Measurement report threshold of RSRQ or RSRP in


6-bit reporting
Full Name FDD Measurement report threshold of RSRQ or RSRP in 6-bit reporting

Abbreviation fddRptthresh2

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(not specified in RepQuant) measurement reports when the type of FDD
Description measurement report is 6-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1295

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.7 TDD Measurement report threshold of RSRP or RSRQ in


6-bit reporting
Full Name TDD Measurement report threshold of RSRP or RSRQ in 6-bit reporting

Abbreviation tddRptthresh

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(not specified in RepQuant) measurement reports when the type of TDD
Description measurement report is 6-bit.

Instance Cell

0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
Value Range and Step 7: never

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

2-1296

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.28.8 TDD Measurement report threshold of RSRQ or RSRP in


6-bit reporting
Full Name TDD Measurement report threshold of RSRQ or RSRP in 6-bit reporting

Abbreviation tddRptthresh2

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(not specified in RepQuant) measurement reports when the type of TDD
Description measurement report is 6-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1297

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.9 FDD Measurement report threshold of RSRP or RSRQ in


3-bit reporting
Full Name FDD Measurement report threshold of RSRP or RSRQ in 3-bit reporting

Abbreviation fddMeasRptOffset

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_MEASUREMENT_REPORT_OFFSET

3GPP Reference 3GPP TS 44.018

This parameter determines the calculated mapping value of RSRP or


RSRQ (specified in RepQuant) parameters when the type of FDD mea-
Description surement report is 3-bit.

Instance Cell

{repQuant==0}[0..63],
Value Range and Step {repQuant==1}[0..30]

Unit N/A

Default Value 0

Default Value It is required to configure this parameter


Configuration Reason according to the protocol.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1298

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.28.10 FDD Measurement report threshold of RSRQ or RSRP in


3-bit reporting
Full Name FDD Measurement report threshold of RSRQ or RSRP in 3-bit reporting

Abbreviation fddMeasRptthresh2

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(not specified in RepQuant) measurement reports when the type of FDD
Description measurement report is 3-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1299

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.11 TDD Measurement report threshold of RSRP or RSRQ in


3-bit reporting
Full Name TDD Measurement report threshold of RSRP or RSRQ in 3-bit reporting

Abbreviation tddMeasRptOffset

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_MEASUREMENT_REPORT_OFFSET

3GPP Reference 3GPP TS 44.018

This parameter determines the offset value in RSRP or RSRQ (specified


in RepQuant) measurement reports when the type of TDD measurement
Description report is 3-bit.

Instance Cell

{repQuant==0}[0..63],
Value Range and Step {repQuant==1}[0..30]

Unit N/A

Default Value 0

Default Value It is required to configure this parameter


Configuration Reason according to the protocol.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1300

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.28.12 TDD Measurement report threshold of RSRQ or RSRP in


3-bit reporting
Full Name TDD Measurement report threshold of RSRQ or RSRP in 3-bit reporting

Abbreviation tddMeasRptthresh2

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting RSRP or RSRQ


(not specified in RepQuant) measurement reports when the type of TDD
Description measurement report is 3-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1301

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.13 Measurement report threshold offset of RSRQ or RSRP


in 3-bit reporting
Full Name Measurement report threshold offset of RSRQ or RSRP in 3-bit reporting

Abbreviation rptGranularity

Managed Object E-UTRAN Measurement

3GPP Name REPORTING_GRANULARITY

3GPP Reference 3GPP TS 44.018

This parameter determines the offset value in RSRP or RSRQ measure-


Description ment reports when the type of measurement report is 3-bit.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value It is required to configure this parameter


Configuration Reason according to the protocol.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1302

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.28.14 Measurement threshold of UE performing GPRS E-UTRAN


Cell
Full Name Measurement threshold of UE performing GPRS E-UTRAN Cell

Abbreviation qsearchP_Ps

Managed Object E-UTRAN Measurement

3GPP Name Qsearch_P_E-UTRAN

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold used when the UE starts mea-
surement on reselection of a GPRS LTE cell. If the value of this parameter
ranges from 0 to 7, the system searches EUTRAN adjacent cells when the
signal strength is lower than that corresponding to the value. If the value
of this parameter ranges from 8 to 15, the system searches EUTRAN
cells when the UE signal strength is higher than that corresponding to the
Description value.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 7

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1303

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.15 GPRS max number of E-UTRAN adjacent cells in


measurement report
Full Name GPRS max number of E-UTRAN adjacent cells in measurement report

Abbreviation mulRatRpt_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_REP_QUANT

3GPP Reference 3GPP TS 44.018

This parameter determines the maximum number of LTE adjacent cells


(GPRS) supported in the measurement report or the list of cells with the
Description strongest signal strength.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 2

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1304

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.28.16
GPRS class of reported quantities of E-UTRAN adjacent cells
Full Name GPRS class of reported quantities of E-UTRAN adjacent cells

Abbreviation repQuant_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_MULTIRAT_REPORTING

3GPP Reference 3GPP TS 44.018

This parameter determines the type of GPRS LTE adjacent cells in the
Description measurement report.

Instance Cell

0: RSRP(RSRP)
Value Range and Step 1: RSRQ(RSRQ)

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1305

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ


Full Name GPRS FDD Measurement report threshold of RSRP or RSRQ

Abbreviation fddRptThresh_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting GPRS RSRP or


RSRQ (specified in RepQuant) measurement reports when the type of
Description FDD measurement report is 6-bit.

Instance Cell

0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
Value Range and Step 7: never

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

2-1306

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP


Full Name GPRS FDD Measurement report threshold of RSRQ or RSRP

Abbreviation fddRptThresh2_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_FDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting GPRS RSRP or


RSRQ (not specified in RepQuant) measurement reports when the type
Description of FDD measurement report is 6-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1307

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ


Full Name GPRS TDD Measurement report threshold of RSRP or RSRQ

Abbreviation tddRptThresh_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_REPORTING_THRESHOLD

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting GPRS RSRP or


RSRQ (not specified in RepQuant) measurement reports when the type
Description of TDD measurement report is 6-bit.

Instance Cell

0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
Value Range and Step 7: never

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

2-1308

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP


Full Name GPRS TDD Measurement report threshold of RSRQ or RSRP

Abbreviation tddRptThresh2_Ps

Managed Object E-UTRAN Measurement

3GPP Name E-UTRAN_TDD_REPORTING_THRESHOLD_2

3GPP Reference 3GPP TS 44.018

This parameter determines the threshold for reporting GPRS RSRP or


RSRQ (not specified in RepQuant) measurement reports when the type
Description of TDD measurement report is 6-bit.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1309

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In


Dedicated Mode
RxLevel Threshold for Measure E-UTRAN Neighbour Cell In Dedicated
Full Name Mode

Abbreviation QSearchC

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter defines a threshold. If the receiving level of the local cell
is lower than this threshold (meaning the parameter value is 0-6) or higher
than the threshold (meaning the parameter value is 8-14), the UE starts
searching for E-UTRAN neighbor cells. 7 means always and 15 means
Description never.

Instance Cell

0:below - 98dBm
1:below - 94dBm
2:below - 90dBm
3:below -86dBm
4:below -82dBm
5:below -78dBm
6:below -74dBm
7:always
8:above - 78dBm
9:above -74dBm
10:above -70dBm
11:above -66dBm
12:above -62dBm
13:above -58dBm
14:above -54dBm
Value Range and Step 15:never

Unit N/A

Default Value 7

Default Value Set it to 7 so that MSs can detect E_UTRAN neighbor cells in the
Configuration Reason shortest time and prepare for a handover.

Adjust this parameter based on the network condition so that the system
Configuration Rule and
starts E-UTRAN neighbor cell measurement when the local cell level is
Adjustment Suggestion
higher or lower than a specified value.

Change Mode Offline

Related features N/A

2-1310

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.22 Slippery window size for calculating average value of


E-Utran Neighbour Cell
Slippery window size for calculating average value of E-Utran Neighbour
Full Name Cell

Abbreviation WindowEutran

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

Slippery window size for calculating average value of E-Utran Neighbour


Description Cell

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value Sufficient samples should be provided to ensure accuracy of E_UTRAN


Configuration Reason neighbor cell signals.

If this parameter is set too low, the signal information of E_UTRAN


Configuration Rule and neighbor cells may be inaccurate due to occasional signal fluctuation.
Adjustment Suggestion If the parameter is set too high, the latest E_UTRAN neighbor signals
cannot be represented.

Change Mode Offline

Related features N/A

2-1311

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.23 offset to the reported value when prioritizing the FDD


E-UTRAN cells for 6bit reporting
offset to the reported value when prioritizing the FDD E-UTRAN cells for
Full Name 6bit reporting

Abbreviation FDDRptOffset6bit

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the FDD E-UTRAN cells for
Description 6bit reporting

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and Set this parameter to a larger value if FDD E_UTRAN neighbor cell are
Adjustment Suggestion expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1312

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.24 offset to the reported value when prioritizing the TDD


E-UTRAN cells for 6bit reporting
offset to the reported value when prioritizing the TDD E-UTRAN cells for
Full Name 6bit reporting

Abbreviation TDDRptOffset6bit

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the TDD E-UTRAN cells for
Description 6bit reporting

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and Set this parameter to a larger value if TDD E_UTRAN neighbor cell are
Adjustment Suggestion expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1313

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.25 offset to the reported value when prioritizing the FDD


E-UTRAN cells for 3bit reporting
offset to the reported value when prioritizing the FDD E-UTRAN cells for
Full Name 3bit reporting

Abbreviation FDDRptOffset3bit

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the FDD E-UTRAN cells for
Description 3bit reporting

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and Set this parameter to a larger value if FDD E_UTRAN neighbor cell are
Adjustment Suggestion expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1314

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.26 offset to the reported value when prioritizing the TDD


E-UTRAN cells for 3bit reporting
offset to the reported value when prioritizing the TDD E-UTRAN cells for
Full Name 3bit reporting

Abbreviation TDDRptOffset3bit

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the TDD E-UTRAN cells for
Description 3bit reporting

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and Set this parameter to a larger value if TDD E_UTRAN neighbor cell are
Adjustment Suggestion expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1315

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.27 offset to the reported value when prioritizing the FDD


E-UTRAN cells for PS
offset to the reported value when prioritizing the FDD E-UTRAN cells for
Full Name PS

Abbreviation FDDRptOffset_PS

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the FDD E-UTRAN cells for
Description PS

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and For PS service, set this parameter to a larger value if FDD E_UTRAN
Adjustment Suggestion neighbor cell are expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1316

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.28.28 offset to the reported value when prioritizing the TDD


E-UTRAN cells for PS
offset to the reported value when prioritizing the TDD E-UTRAN cells for
Full Name PS

Abbreviation TDDRptOffset_PS

Managed Object E-UTRAN Measurement

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

offset to the reported value when prioritising the TDD E-UTRAN cells for
Description PS

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Generally, neighbor cells of different types have no difference in priority.

Configuration Rule and For PS service, set this parameter to a larger value if TDD E_UTRAN
Adjustment Suggestion neighbor cell are expected to be reported in priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1317

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->E-UTRAN Measurement

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.29 UTRAN Handover


Control(GUtranHandoverControl)
2.29.1 UTRAN Handover Control ID
Full Name UTRAN Handover Control ID

Abbreviation GUtranHandoverControl

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

Description UTRAN Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1318

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.2 Inter system handover supported


Full Name Inter system handover supported

Abbreviation interSysHoCtrl

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

This parameter indicates whether intersystem handover within BSC is al-


lowed. The parameters determines whether BSC can issue handover to
Description 3G system.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason There is a demand of the site will be required to open

For a BSC, open the InterSysHoCtrl (intersystem)


Configuration Rule and
switch in BSC to support the 2/3G intersystem handover in CS domain.
Adjustment Suggestion
Usually this parameter adopts the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1319

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.3 Punishment period of UTRAN cell when handover failure


Full Name Punishment period of UTRAN cell when handover failure

Abbreviation hoFailPenalTm3g

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter defines a protection period to prevent an immediate han-


Description dover after a handover failure.

Instance Cell

Value Range and Step 1..255

Unit N/A

Default Value 7

This parameter defines a protection period


Default Value to prevent an immediate handover after a handover failure. The
Configuration Reason steadiness
of MS call should also be considered.

There will be a period of penalty time to prevent handover action on


a user.
Configuration Rule and If this parameter is set too low, there will not be enough penalty time and
Adjustment Suggestion handover failures are easy to happen again.
If this parameter is set too high, the penalty time will be too long and call
drops are easy to happen again.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1320

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.4 Slippery window size for calculating Ec/No or RSCP average


value to be zero
Slippery window size for calculating Ec/No or RSCP average value to be
Full Name zero

Abbreviation hoWindow3g

Managed Object UTRAN Handover Control

3GPP Name Hreqave

3GPP Reference N/A

In GSM system, BSC uses the power level measurement data to


manage and control handover decisions. BSC uses average values
instead of original values of measurement data for handover decisions.
It helps prevent negative impact on network performance caused by
abrupt changes in measurement data. Average on measurement value
in UTRAN adjacent cell also shall be required.
HoWindowUTRAN of Ec/No or RSCP average is the window size to
calculate Ec/No or RSCP average in adjacent UTRAN cell, that is,
Description sample count used through average calculation.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 6

Number of samples should be enough for ensuring


Default Value the preciseness of handover decision, and for initiating handover
Configuration Reason as early as possible to avoid call drop when the signal is poor during
communication.

2-1321

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the value is set too small and samples of handover decision are too
few, the handover decision is incorrect.
Configuration Rule and
If the value is set too large, it takes a long time to make handover
Adjustment Suggestion
decisions, which is likely to result in call drops caused by handover
delays.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.5 Number that measurement value allowed to be zero


Full Name Number that measurement value allowed to be zero

Abbreviation zeroAllowed3g

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, MS can report to BSS the


measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
Description reported values divided by Neighboring cell .

2-1322

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

To be specific, during averaging, if the count of 0s in the sampling count


exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
(NCellWindow - the count of 0s).

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 1

Default Value Occasional 0 is acceptable.Excessive occurrences


Configuration Reason of 0 indicate that the signals of this adjacent cell are too poor.

If the number of 0s allowed is adjusted as too small, the adjacent cell


with good signal maybe missed.
Configuration Rule and If the number of 0s allowed is adjusted as too large, handover to the
Adjustment Suggestion adjacent cell with poor signal maybe initiated.
It is recommended to set the value as small as possible, in order to
select the adjacent cell with good signal.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold


Full Name Handover from GSM to UTRAN FDD RSCP Threshold

2-1323

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation hoRscpThsFdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

If there are at least HoRSCP_N_FDD RSCP average values are reserved


for an adjacent UTRAN cell in BSC and at least HoRSCP_P_FDD of
HoRSCP_N_FDD latest RSCP average values is not lower than the sum
of HoRSCPThsFDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered. This adjacent cell is the candidate tar-
Description get cell for the PS handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

This parameter indicates the minimum threshold


Configuration Rule and for the handover to FDD network. Set the parameter according to 2/3G
Adjustment Suggestion interworking. If 3G network takes priority, this parameter should
be set low as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1324

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.29.7 Handover from GSM to UTRAN FDD RSCP Value P


Full Name Handover from GSM to UTRAN FDD RSCP Value P

Abbreviation hoRscp_P_Fdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not


lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description the PS handover from GSM to UTRAN can be triggered.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.8 Handover from GSM to UTRAN FDD RSCP Value N


Full Name Handover from GSM to UTRAN FDD RSCP Value N

2-1325

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation hoRscp_N_Fdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not


lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description the PS handover from GSM to UTRAN can be triggered.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold


Full Name Handover from GSM to UTRAN FDD Ec/No Threshold

Abbreviation hoEcNoThsFdd

Managed Object UTRAN Handover Control

2-1326

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name None

3GPP Reference N/A

BSC reserves at least HoEcNo_N_FDD RSCP average values for a


UTRAN adjacent cell. When at least HoEcNo_P_FDD out of the latest
HoEcNo_N_FDD average values are larger than or equal to the sume
of HoEcNoThsFDD and HoEcNoOffsetUTRAN, handover from GSM
to UTRAN takes place and the adjacent cell is taken as candidate
Description destination cell for handover.

Instance Cell

Value Range and Step 0..49

Unit N/A

Default Value 25

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P


Full Name Handover from GSM to UTRAN FDD Ec/No Value P

Abbreviation hoEcNo_P_Fdd

Managed Object UTRAN Handover Control

2-1327

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name None

3GPP Reference N/A

When at least HoEcNo_P_FDD out of HoEcNo_N_FDD average values


are larger than or equal to the sum of HoEcNoThsFDD and HoEcNoOff-
Description setUTRAN, handover from GSM to UTRAN takes place.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N


Full Name Handover from GSM to UTRAN FDD Ec/No Value N

Abbreviation hoEcNo_N_Fdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

2-1328

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When at least HoEcNo_P_FDD out of HoEcNo_N_FDD average values


are larger than or equal to the sum of HoEcNoThsFDD and HoEcNoOff-
Description setUTRAN, handover from GSM to UTRAN takes place.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.12 Directed retry to UTRAN cell allowed


Full Name Directed retry to UTRAN cell allowed

Abbreviation interSysRdCtrl

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1329

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines if allow directed retry to UTRAN cell. When


no service channel is allocated in this cell, a user can try to redirect to
adjacent cell under allowed case by corresponding function switch. If this
Description parameter is configured as Yes, it can be redirected to 3G adjacent cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason based on field pritical request

If this cell has adjacent 3Gcells, this switch


Configuration Rule and
can try to redirect to an adjacent 3G cell when no service channel
Adjustment Suggestion
is allocated in this cell.

Change Mode Offline

Related features ZGB-03-01-002 Direct Retry

Related Parameters OutDrEnable

If the OutDrEnable parameter is set Yes, the


Relationship inter-system redirection can be conducted only when this parameter
is set Yes.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.13 FDD/TDD handover


Full Name FDD/TDD handover

Abbreviation fddTddPrio

Managed Object UTRAN Handover Control

3GPP Name N/A

2-1330

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter indicates the priority control of FDD/TDD handover.


When FDD adjacent cells and TDD adjacent cells exist together, to
control the selection sequence of a target cell, FDDTDDPrio parameter
Description to show whether to prefer to FDD cell handover or to TDD cell handover.

Instance Cell

0: Priority to FDD
Value Range and Step 1: Priority to TDD

Unit N/A

Default Value 0

Default Value
Configuration Reason The value based on site condition

Adjust the parameter according to the actual


Configuration Rule and
situations on site. If the adjacent cell is FDD, handover FDD is preferred;
Adjustment Suggestion
if the adjacent cell is TDD, handover to TDD is preferred.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.14 UTRAN handover


Full Name UTRAN handover

Abbreviation serviceHo

Managed Object UTRAN Handover Control

3GPP Name Service Handover

2-1331

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 48.008

This parameter describes UTRAN handover priority control. MSC sends


the Service Handover parameter to BSC through the ASSIGNMENT
REQUEST and HANDOVER REQUEST messages.
Service Handover parameter has three values, including prefer to
UTRAN handover, not prefer to UTRAN handover, disallow to UTRAN
handover, taking actions on handover decision on subsequent BSC.
ServiceHo can be configured as the Default Value used while MSC does
not deliver
the Service Handover parameter, or configured as BSC forcedly using
the mode set by ServiceHo, but not the Service Handover parameter
Description delivered by MSC.

Instance Cell

0:Handover to UTRAN first


1:Not Handover to UTRAN first
2:Not allow to Handover to UTRAN
3:According to MSC, default handover to UTRAN first
4:According to MSC, default not handover to UTRAN first
Value Range and Step 5:According to MSC, default not allowed to handover to UTRAN

Unit N/A

Default Value 3

Default Value
Configuration Reason The value based on site condition

Configuration Rule and The parameter is configured based on MSC strategy,


Adjustment Suggestion and can be adjusted as needed.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

2-1332

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold


Full Name Handover from GSM to UTRAN TDD RSCP Threshold

Abbreviation hoRscpThsTdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

The parameter defines a threshold. If there are at least HoRSCP_N_TDD


RSCP average values are reserved for an adjacent UTRAN cell in
BSC and at least HoRSCP_P_TDD of HoRSCP_N_TDD latest RSCP
average values are not lower than the sum of HoRSCPThsTDD and
HoRSCPOffsetUTRAN, the PS handover from GSM to UTRAN can be
triggered.
Description This adjacent cell is the candidate target cell for the PS handover.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

This parameter indicates the minimum threshold


for the handover to FDD network. The parameter should be set
Configuration Rule and
according
Adjustment Suggestion
to 2/3G interworking strategy. If 3G network takes priority, this
parameter should be set low as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1333

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.16 Handover from GSM to UTRAN TDD RSCP Value N


Full Name Handover from GSM to UTRAN TDD RSCP Value N

Abbreviation hoRscp_N_Tdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

The parameter defines a threshold.


If there are at least HoRSCP_N_TDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD of
HoRSCP_N_TDD
latest RSCP average values are not lower than the sum of
HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered.
Description This adjacent cell is the candidate target cell for the PS handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1334

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.17 Handover from GSM to UTRAN TDD RSCP Value P


Full Name Handover from GSM to UTRAN TDD RSCP Value P

Abbreviation hoRscp_P_Tdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

The parameter defines a threshold.


If there are at least HoRSCP_N_TDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD of
HoRSCP_N_TDD
latest RSCP average values are not lower than the sum of
HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered.
Description This adjacent cell is the candidate target cell for the PS handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason The value of field experience

Configuration Rule and


Adjustment Suggestion It is recommended to apply the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1335

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing
Full Name RSCP threshold when handover from GSM to FDD for load sharing

Abbreviation loadHoRscpThsFdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

This parameter is used to traffic handover. Firstly you shall configure a


traffic handover threshold and inter-system handover switch.
This parameter is used to handover decision in 3G cell after traffic is
overloaded. BSC reserves at least HoRSCP_N_FDD RSCP average
values for a UTRAN adjacent cell. When at least HoRSCP_P_FDD out
of the latest HoRSCP_N_FDD average values are larger than or equal
to the sum of LoadHoRSCPThsFDD and HoRSCPOffsetUTRAN, it can
be used as traffic handover from GSM to UTRAN.
Description This parameter value shall be lower than HoRSCPThsFDD.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

2-1336

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The value should not be higher than that of HoRSCPThsFDD. The


iBSC should timely inform adjacent BSS or BSS about its loads through
periodically sending the LOAD INDICATION message to the MSC, to
achieve handover based on loads.
Configuration Rule and
Parameters ( including LoadInd, LoadValidTime, and LoadIndPrd)
Adjustment Suggestion
related to the background are used to achieve load measurement and
report.
This parameter has never been used . It is recommended to reserve
the default value.

Change Mode Offline

Related features N/A

Related Parameters HoRSCPThsFDD

This parameter should not be set higher than


Relationship
HoRSCPThsFDD.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.19 Ec/No threshold when handover from GSM to 3G for load


sharing
Full Name Ec/No threshold when handover from GSM to 3G for load sharing

Abbreviation loadHoEcNoThsFdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

2-1337

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is used to traffic handover. Firstly you shall configure a


traffic handover threshold and inter-system handover switch.
This parameter is used to handover decision in 3G cell after traffic is
overloaded. BSC reserves at least HoEcNo_N_FDD RSCP average
values for a UTRAN adjacent cell. When at least HoEcNo_P_FDD out of
the latest HoEcNo_N_FDD average values are larger than or equal to
the sum of LoadHoEcNoThsFDD and HoEcNoOffsetUTRAN, it can be
used as traffic handover from GSM to UTRAN.
Description This parameter value shall be lower than HoEcNoThsFDD.

Instance Cell

Value Range and Step 0..49

Unit N/A

Default Value 25

Default Value
Configuration Reason The value of field experience

The value should not be higher than that of HoRSCPThsFDD. The


iBSC should timely inform adjacent BSS or BSS about its loads through
periodically sending the LOAD INDICATION message to the MSC, to
achieve handover based on loads.
Configuration Rule and
Parameters ( including LoadInd, LoadValidTime, and LoadIndPrd)
Adjustment Suggestion
related to the background are used to achieve load measurement and
report.
This parameter has never been used . It is recommended to reserve
the default value.

Change Mode Offline

Related features N/A

Related Parameters HoEcNoThsFDD

Relationship This parameter should not be higher than HoEcNoThsFDD.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1338

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing
Full Name RSCP threshold when handover from GSM to TDD for load sharing

Abbreviation loadHoRscpThsTdd

Managed Object UTRAN Handover Control

3GPP Name None

3GPP Reference N/A

This parameter is used to traffic handover. Firstly you shall configure a


traffic handover threshold and inter-system handover switch.
This parameter is used to handover decision in 3G cell after traffic is
overloaded. BSC reserves at least HoRSCP_N_TDD RSCP average
values for a UTRAN adjacent cell. When at least HoRSCP_P_TDD out
of the latest HoRSCP_N_TDD average values are larger than or equal
to the sum of LoadHoRSCPThsTDD and HoRSCPOffsetUTRAN, it can
be used as traffic handover from GSM to UTRAN.
Description This parameter value shall be lower than HoRSCPThsFDD.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

The value should not be higher than that of HoRSCPThsFDD. The


iBSC should timely inform adjacent BSS or BSS about its loads through
periodically sending the LOAD INDICATION message to the MSC, to
Configuration Rule and achieve handover based on loads.
Adjustment Suggestion Parameters (including LoadInd, LoadValidTime, and LoadIndPrd) related
to the background are used to achieve load measurement and report.
This parameter has never been used. It is recommended to reserve
the default value.

Change Mode Offline

Related features N/A

Related Parameters HoRSCPThsTDD

Relationship This parameter should not be set higher than HoRSCPThsTDD.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1339

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.21 Penalty time of handover failure(PS)


Full Name Penalty time of handover failure(PS)

Abbreviation hoFailPenalTm3g_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

If the PS handover to a 3G target cell fails, the cell will be punished in a


period of time, during which no handover will be conducted to this cell.
Description This parameter determines the penalty duration.

Instance External Neighbor Cell

Value Range and Step 1..100

Unit s

Default Value 5

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

2-1340

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.22 Window of calculating 3G cell(PS)


Full Name Window of calculating 3G cell(PS)

Abbreviation hoWindow3g_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

The BSC makes a PS handover decision based on measurement data.


To reduce negative influence caused by sudden value variations due
to complicated radio transmission, the BSC uses a series of average
values calculated based on measurement data instead of raw data.
This parameter specifies the window size (HoWindow3G_PS) for
calculating average values of Ec/No or RSCP in UTRAN neighbor cells.
Description It indicates the number of samples required for average calculation.

Instance External Neighbor Cell

Value Range and Step 1..31

Unit N/A

Default Value 6

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1341

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.23 Support PS handover of Inter-System(PS)


Full Name Support PS handover of Inter-System(PS)

Abbreviation interSysHoCtrl_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether intersystem handover within BSC is al-


lowed. This parameters determines whether BSC can issue handover to
Description 3G system.

Instance External Neighbor Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

2-1342

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.24 Number of zero in measure result(PS)


Full Name Number of zero in measure result(PS)

Abbreviation zeroAllowed3G_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, MS can report to BSS the


measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell .
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description (NCellWindow - the count of 0s).

Instance External Neighbor Cell

Value Range and Step 0..31

Unit N/A

Default Value 1

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

2-1343

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.25 Priority to FDD or TDD(PS)


Full Name Priority to FDD or TDD(PS)

Abbreviation fddTddPrio_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the handover priority to FDD cells or TDD cells.
When both FDD and TDD neighbor cells are available, this parameter
(FDDTDDPrio_PS) is used to determine the target cell selection se-
quence during PS handover: handover to an FDD cell first or handover
Description to a TDD cell first.

Instance External Neighbor Cell

0: Priority to FDD
Value Range and Step 1: Priority to TDD

Unit N/A

Default Value 0

Default Value
Configuration Reason consider the supporting capability of mobile phone

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

2-1344

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.26 RSCP threshold to FDD in load handover(PS)


Full Name RSCP threshold to FDD in load handover(PS)

Abbreviation loadHoRscpThsFdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for traffic PS handover. First, a traffic handover


threshold and inter-system handover switch should be configured.
This parameter is used for decision of PS handover to a 3G cell when
traffic is overloaded. When the BSC reserves the average values of
at least HoRSCP_N_FDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoRSCP_N_FDD_PS RSTPs have at
least HoRSCP_P_FDD_PS values greater than or equal to the sum of
LoadHoRSCPThsFDD_PS and HoRSCPOffset3G_PS, it can trigger
traffic PS handover from GSM to UTRAN. The value should be lower
Description than HoRSCPThsFDD_PS.

Instance External Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason configure by normal wireless environment

2-1345

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.27 Ec/No threshold to FDD in load handover(PS)


Full Name Ec/No threshold to FDD in load handover(PS)

Abbreviation loadHoEcNoThsFdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for traffic PS handover. First, a traffic handover


threshold and inter-system handover switch should be configured.
This parameter is used for decision of PS handover to a 3G cell when
traffic is overloaded. When the BSC reserves the average values of
at least HoEcNo_N_FDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoEcNo_N_FDD_PS RSTPs have at least
HoEcNo_P_FDD_PS values greater than or equal to the sum of Load-
HoEcNoThsFDD_PS and HoRSCPOffset3G_PS, it can trigger traffic
PS handover from GSM to UTRAN. The value should be lower than
Description HoEcNoThsFDD_PS.

Instance External Neighbor Cell

Value Range and Step 0..49

Unit N/A

2-1346

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 25

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.28 RSCP threshold to TDD in load handover(PS)


Full Name RSCP threshold to TDD in load handover(PS)

Abbreviation loadHoRscpThsTdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for traffic PS handover. First, a traffic handover


threshold and inter-system handover switch should be configured.
This parameter is used for decision of PS handover to a 3G cell when
traffic is overloaded. When the BSC reserves the average values of
at least HoRSCP_N_TDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoRSCP_N_TDD_PS RSTPs have at
least HoRSCP_P_TDD_PS values greater than or equal to the sum of
LoadHoRSCPThsTDD_PS and HoRSCPOffset3G_PS, it can trigger
traffic PS handover from GSM to UTRAN. The value should be lower
Description than HoRSCPThsFDD_PS.

2-1347

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance External Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.29 RSCP threshold to FDD(PS)


Full Name RSCP threshold to FDD(PS)

Abbreviation hoRscpThsFdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1348

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

There are at least HoRSCP_N_FDD_PS RSCP average values are


reserved for an adjacent UTRAN cell in BSC.
At least HoRSCP_P_FDD_PS of HoRSCP_N_FDD latest RSCP
average values is not lower than the sum of HoRSCPThsFDD_PS and
HoRSCPOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description cell is the candidate target cell for the PS handover.

Instance External Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.30 P of handovering to FDD by RSCP(PS)


Full Name P of handovering to FDD by RSCP(PS)

Abbreviation hoRscp_P_Fdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

2-1349

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

HoRSCP_P_FDD_PS of HoRSCP_N_FDD_PS RSCP average values


is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOff-
Description set3G_P, the PS handover from GSM to UTRAN can be triggered.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters HoEcNo_N_FDD_PS

Relationship The HoRSCP_P_FDD_PS cannot be higher than HoRSCP_N_FDD_PS.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.31 N of handovering to FDD by RSCP(PS)


Full Name N of handovering to FDD by RSCP(PS)

Abbreviation hoRscp_N_Fdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1350

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

HoRSCP_P_FDD_PS of HoRSCP_N_FDD_PS RSCP average values


is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOff-
Description set3G_P, the PS handover from GSM to UTRAN can be triggered.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value It is recommended to set the default value


Configuration Reason to 4, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.32 EcNo threshold to FDD(PS)


Full Name EcNo threshold to FDD(PS)

Abbreviation hoEcNoThsFdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1351

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

There are at least HoEcNo_N_FDD_PS Ec/No average values are


reserved for an adjacent UTRAN cell in BSC.
At least HoEcNo_P_FDD_PS of HoEcNo_N_FDD_PS latest Ec/No
average values is not lower than the sum of HoEcNoThsFDD_PS and
HoEcNoOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description cell is the candidate target cell for the PS handover.

Instance External Neighbor Cell

Value Range and Step 0..49

Unit N/A

Default Value 25

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.33 P of handovering to FDD by EcNo(PS)


Full Name P of handovering to FDD by EcNo(PS)

Abbreviation hoEcNo_P_Fdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

2-1352

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter specifies the value of P that is used for PS handover


decision from GSM to UTRAN.
A PS handover from GMS to UTRAN is initiated when P
(HoEcNo_P_FDD_PS) of N (HoEcNo_N_FDD_PS) average Ec/No
values are equal to or greater than the sum of HoEcNoThsFDD_PS
Description and HoEcNoOffset3G_PS.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters HoEcNo_N_FDD_PS

Relationship The HoEcNo_P_FDD_PS cannot be higher than HoEcNo_N_FDD_PS.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.34 N of handovering to FDD by EcNo(PS)


Full Name N of handovering to FDD by EcNo(PS)

Abbreviation hoEcNo_N_Fdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

2-1353

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter specifies the value of N that is used for PS handover


decision from GSM to UTRAN.
A PS handover from GMS to UTRAN is initiated when P
(HoEcNo_P_FDD_PS) of N (HoEcNo_N_FDD_PS) average Ec/No
values are equal to or greater than the sum of HoEcNoThsFDD_PS
Description and HoEcNoOffset3G_PS.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value It is recommended to set the default value


Configuration Reason to 4, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.35 RSCP threshold to TDD(PS)


Full Name RSCP threshold to TDD(PS)

Abbreviation hoRSCPThsTdd_Ps

Managed Object UTRAN Handover Control

3GPP Name N/A

2-1354

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

There are at least HoRSCP_N_TDD_PS RSCP average values are


reserved for an adjacent UTRAN cell in BSC.
At least HoRSCP_P_TDD_PS of HoRSCP_N_TDD_PS latest RSCP
average values is not lower than the sum of HoRSCPThsTDD_PS and
HoRSCPOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description cell is the candidate target cell for the PS handover.

Instance External Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.29.36 N of handovering to TDD by RSCP(PS)


Full Name N of handovering to TDD by RSCP(PS)

Abbreviation hoRSCP_N_Tdd_Ps

Managed Object UTRAN Handover Control

2-1355

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

There are at least HoRSCP_N_TDD_PS RSCP average values are


reserved for an adjacent UTRAN cell in BSC.
At least HoRSCP_P_TDD_PS of HoRSCP_N_TDD_PS latest RSCP
average values is not lower than the sum of HoRSCPThsTDD_PS and
HoRSCPOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description cell is the candidate target cell for the PS handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value It is recommended to set the default value


Configuration Reason to 4, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2.29.37 P of handovering to TDD by RSCP


Full Name P of handovering to TDD by RSCP

Abbreviation hoRSCP_P_Tdd_Ps

2-1356

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

There are at least HoRSCP_N_TDD_PS RSCP average values are


reserved for an adjacent UTRAN cell in BSC.
At least HoRSCP_P_TDD_PS of HoRSCP_N_TDD_PS latest RSCP
average values is not lower than the sum of HoRSCPThsTDD_PS and
HoRSCPOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description cell is the candidate target cell for the PS handover.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value It is recommended to set the default value


Configuration Reason to 3, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters HoRSCP_N_TDD_PS

The value of HoRSCP_P_TDD_PS cannot be higher than the value


Relationship
of HoRSCP_N_TDD_PS.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2170M frequency band permitted


2.29.38 2110
Full Name 21102170M frequency band permitted

2-1357

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation FDDTrafficHoFreqCtl_0

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system is prior to switch the traffic
Description to the UTRAN FDD 2110-2170M frequency band during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the FDD frequency


Configuration Reason bands allowed during traffic handover.

Select the FDD frequency band for absorbing


Configuration Rule and
traffic as the target cell during traffic handover according to the
Adjustment Suggestion
network condition.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

960M frequency band permitted


2.29.39 925
Full Name 925960M frequency band permitted

Abbreviation FDDTrafficHoFreqCtl_1

Managed Object UTRAN Handover Control

2-1358

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system is prior to switch the traffic
Description to the UTRAN FDD 925-960M frequency band during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the FDD frequency


Configuration Reason bands allowed during traffic handover.

Select the FDD frequency band for absorbing


Configuration Rule and
traffic as the target cell during traffic handover according to the
Adjustment Suggestion
network condition.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

894M frequency band permitted


2.29.40 869
Full Name 869894M frequency band permitted

Abbreviation FDDTrafficHoFreqCtl_2

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1359

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether the system is prior to switch the traffic
Description to the UTRAN FDD 869-894M frequency band during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the FDD frequency


Configuration Reason bands allowed during traffic handover.

Select the FDD frequency band for absorbing


Configuration Rule and
traffic as the target cell during traffic handover according to the
Adjustment Suggestion
network condition.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.29.41 Other Frequency band permitted


Full Name Other Frequency band permitted

Abbreviation FDDTrafficHoFreqCtl_7

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system is prior to switch the traffic
Description to another UTRAN FDD frequency band during traffic handover.

2-1360

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the FDD frequency


Configuration Reason bands allowed during traffic handover.

Select the FDD frequency band for absorbing


traffic as the target cell during traffic handover according to the
Configuration Rule and network condition.
Adjustment Suggestion When the frequency band is not specified by FDDTrafficHoFreqCtl_0,
FDDTrafficHoFreqCtl_1, and FDDTrafficHoFreqCtl_2, select
FDDTrafficHoFreqCtl_7 (that is, other frequency band).

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2025M frequency band permitted


2.29.42 2010
Full Name 20102025M frequency band permitted

Abbreviation TDDTrafficHoFreqCtl_0

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1361

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether the system is prior to switch the traffic
Description to the 2010-2025M frequency band during traffic handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the TDD frequency


Configuration Reason bands allowed during traffic handover.

Select the TDD frequency band for absorbing


Configuration Rule and
traffic as the target cell during traffic handover according to the
Adjustment Suggestion
network condition.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

1900M frequency band permitted


2.29.43 1880
Full Name 18801900M frequency band permitted

Abbreviation TDDTrafficHoFreqCtl_1

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system is prior to switch the traffic
Description to the 1880-1900M frequency band during traffic handover.

2-1362

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the TDD frequency


Configuration Reason bands allowed during traffic handover.

Select the TDD frequency band for absorbing


Configuration Rule and
traffic as the target cell during traffic handover according to the
Adjustment Suggestion
network condition.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.29.44 Other Frequency band permitted


Full Name Other Frequency band permitted

Abbreviation TDDTrafficHoFreqCtl_7

Managed Object UTRAN Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the system is prior to switch the traffic
Description to another frequency band during traffic handover.

Instance Cell

2-1363

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value It is required to configure the TDD frequency


Configuration Reason bands allowed during traffic handover.

Select the TDD frequency band for absorbing


traffic as the target cell during traffic handover according to the
Configuration Rule and network condition.
Adjustment Suggestion When the frequency band is not specified by FDDTrafficHoFreqCtl_0,
FDDTrafficHoFreqCtl_1, select FDDTrafficHoFreqCtl_2 (that is, other
frequency band).

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->UTRAN Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.30 Site(GBtsSiteManager)
2.30.1 Site ID
Full Name Site ID

Abbreviation GBtsSiteManager

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

2-1364

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Description Site ID

Instance None

Value Range and Step 1..65534

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.2 GBtsEquipment DN
Full Name GBtsEquipment DN

Abbreviation refGBtsEquipment

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description GBtsEquipment DN

Instance Site

Value Range and Step None

Unit N/A

2-1365

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value NA

Default Value
Configuration Reason The physical site must be configured.

Configuration Rule and


Adjustment Suggestion Configure this parameter based on the site planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 3

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.3 Config Paging Repeat Support


Full Name Config Paging Repeat Support

Abbreviation CfgPagingRepSupport

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description Config Paging Repeat Support

Instance Site

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason Set the parameter based on the base station version.

2-1366

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion Configure this parameter based on the base station version.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.4 Inter SubCell handover permitted


Full Name Inter SubCell handover permitted

Abbreviation SubCellHO

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

This parameter indicates which inter-subcell handover mode is


supported. Three handover modes are optional. Mode 1: If the MS is
in subcell 2 of the source cell before the handover, it is handed over to
subcell 2 of the target cell in preference. If the MS is in subcell 1 of the
source cell before the handover, it can only be handed over to subcell
1 of the target cell.
Mode 2: No matter which subcell the MS is camped on before the
handover, it can only be handed over to subcell 1 of the target cell.
Mode 3:
Whether the MS can be directly handed over to subcell 2 depends on
the level measurement of the target cell. If the path loss of the
target cell is less than PathLossMin configured for the target cell, the MS
is handed over to subcell 2 in preference. Or else, the MS
Description can only be handed over to subcell 1 of the target cell.

2-1367

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance SITE

0: not allowed
1: allowed
Value Range and Step 2: According to radio measurement

Unit N/A

Default Value 1

In most cases, subcells of the same site have


Default Value
almost the same coverage radius. The MS can be directly handed over
Configuration Reason
between these subcells.

Set the parameter value to "Yes" when the subcells of the site have
similar coverage radius to allow the handover from subcell 2 of the
source cell to subcell 2 of the target cell. If the coverage radius of
the target subcell 2 is greatly different from that of the source subcell
2, especially in the case of SDR multi-antenna transmission, set the
parameter to "Depend on radio measurement". When the coverage
Configuration Rule and
radius of the cell is large, the handover condition must fulfill the criteria
Adjustment Suggestion
of TA. In this case, the radio measurement mode is improper because
TA of the target cell cannot be measured during inter-cell handover.
Set the parameter to "No" to limit the handover to subcell 1 of the target
cell if the previous two modes are inappropriate, or these two modes
cause poor performance such as low handover success rate and high
call drop rate.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1368

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.30.5 Support new abis ps message


Full Name Support new abis ps message

Abbreviation SupNewAbisPsMsg

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates whether a new Abis PS message type is support.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Set this parameter based on whether the site supports the PS Abis new
Configuration Rule and
message format. For the sites supporting this format, enable the switch.
Adjustment Suggestion
Otherwise, disable the function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 2

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.6 The Abis band limit of HR priority


Full Name The Abis band limit of HR priority

Abbreviation bwrestorelimit

2-1369

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

When the bandwidth usage in IP transmission exceeds this threshold, the


Description system prefers the HR mode for the access of voice subscribers.

Instance SITE

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason HR is assigned when IP transmission occupies much bandwidth.

Configuration Rule and This parameter value can be reduced appropriately during IP
Adjustment Suggestion transmission congestion.

Change Mode Offline

Related features N/A

Related Parameters frtohrbwlimit

Relationship frtohrbwlimit >= bwrestorelimit

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.7 The Abis band of HO from FR to HR


Full Name The Abis band of HO from FR to HR

Abbreviation frtohrbwlimit

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

2-1370

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When the bandwidth usage in IP transmission exceeds this threshold, the


Description system hands over some subscribers from FR channels to HR channels.

Instance SITE

Value Range and Step 0..100

Unit %

Default Value 90

Default Value Existing FR changes to HR when IP transmission bandwidth is


Configuration Reason congested.

Configuration Rule and This parameter value can be reduced appropriately during IP
Adjustment Suggestion transmission congestion.

Change Mode Offline

Related features N/A

Related Parameters bwrestorelimit

Relationship frtohrbwlimit >= bwrestorelimit

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.8 Minimal number of idle E1 Abis Timeslot


Full Name Minimal number of idle E1 Abis Timeslot

Abbreviation MinAccessAbisThsE1

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the minimum number of idle timeslots used for
access in the E1 Abis transmission mode. No more channels can be acti-
vated when the number of remaining timeslots is less than this threshold.
Description This parameter can be referred for 3G pre-admission.

2-1371

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 0..64

Unit N/A

Default Value 4

Default Value Set this parameter based on the maximum bandwidth used by the
Configuration Reason minimal subscriber to ensure that one subscriber can use the bandwidth.

A larger value indicates greater difficulty for subscribers to access. If


Configuration Rule and
more subscribers are expected to access, set this parameter to a lower
Adjustment Suggestion
value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.9 Minimal of usable IP Abis bandwidth


Full Name Minimal of usable IP Abis bandwidth

Abbreviation MinAccessAbisThsIP

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

This parameter specifies the minimum bandwidth used for access in the
IP Abis transmission mode. No more channels can be activated when the
remaining bandwidth is less than this threshold. This parameter can be
Description referred for 3G pre-admission.

Instance Cell

2-1372

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..4294967295

Unit kbps

Default Value 64

Default Value Set this parameter based on the maximum bandwidth used by the
Configuration Reason minimal subscriber to ensure that one subscriber can use the bandwidth.

A larger value indicates greater difficulty for subscribers to access. If


Configuration Rule and
more subscribers are expected to access, set this parameter to a lower
Adjustment Suggestion
value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.10 the master power control option for Base Transceiver


Station
Full Name the master power control option for Base Transceiver Station

Abbreviation BtsMasterPwCtrlOp

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description the master power control option for Base Transceiver Station

Instance Site

0: Not Support
Value Range and Step 1: Support

2-1373

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value
Configuration Reason This is a functional switch and is disabled by default.

Configuration Rule and


Adjustment Suggestion Functional switch. It is disabled by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.11 the delay time of master power Off


Full Name the delay time of master power Off

Abbreviation MasterPwrOffTime

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description the delay time of master power Off

Instance Site

Value Range and Step 5..480

Unit Min

Default Value 5

Default Value
Configuration Reason Set it to the time for waiting for the base station to start.

2-1374

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion Use the default value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.12 the delay time of Transceivers Off


Full Name the delay time of Transceivers Off

Abbreviation TrxOffTime

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description the delay time of Transceivers Off

Instance Site

Value Range and Step 0..640

Unit Min

Default Value 0

Default Value
Configuration Reason Start immediately.

Configuration Rule and


Adjustment Suggestion Use the default value.

Change Mode Offline

Related features N/A

2-1375

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.13 the Percent for Transceivers Off


Full Name the Percent for Transceivers Off

Abbreviation TrxOffPercent

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description the Percent for Transceivers Off

Instance Site

Value Range and Step 0..100

Unit %

Default Value 30

Default Value
Configuration Reason Disable some TRXs to relieve congestion.

Configuration Rule and Configure this parameter based on the base station's auxiliary power
Adjustment Suggestion configuration. A greater value indicates that more TRXs are disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1376

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.14 the GNode id for master power control


Full Name the GNode id for master power control

Abbreviation MasterPwCtrlGNode

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

Description the GNode id for master power control

Instance Site

Value Range and Step 1..12

Unit N/A

Default Value 3

Default Value
Configuration Reason Set this parameter based on the base station configuration.

Configuration Rule and


Adjustment Suggestion Configure this parameter based on the site configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

2-1377

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.30.15 Benchmark Site


Full Name Benchmark Site

Abbreviation BenchmarkSite

Managed Object Site

3GPP Name N/A

3GPP Reference N/A

This parameter sets the benchmark site for clock synchronization when
Description the Um interface soft synchronization function is used.

Instance Site

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Set the parameter as required.


Configuration Reason It is not set by default.

Configuration Rule and Set this parameter as required. Normally the benchmark site is the site
Adjustment Suggestion that provides the GPS clock source.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site

Parameter Modifying
Version N/A

2-1378

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.31 Site baseband share


Configuration(GSiteBaseBandShare)
2.31.1 Site baseband share Configuration ID
Full Name Site baseband share Configuration ID

Abbreviation GSiteBaseBandShare

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

Description Site baseband share Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version N/A

2-1379

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.31.2 Baseband resource share support


Full Name Baseband resource share support

Abbreviation BaseBandShare

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

Description Baseband resource share support

Instance Site

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Configuration Rule and If the traffic distributes in tide mode, this


Adjustment Suggestion function can be enabled according to operator requirements.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters BaseBandShare

Relationship This switch is a BSC-level and site-level switch.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1380

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.31.3 Traffic threshold for allocate baseband


Full Name Traffic threshold for allocate baseband

Abbreviation bbRequestTraThs

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a traffic threshold for baseband resource allo-


cation. The BSC selects specific TRXs to allocate baseband resources
when detecting in a measurement report that the traffic in a cell is greater
Description than this threshold.

Instance Site

Value Range and Step 0..100

Unit %

Default Value 70

Default Value When the cell traffic is relatively high, the carrier can be selected to
Configuration Reason allocate baseband resources.

If this parameter is too large, the cell is even more congestioned when
baseband resources are allocated for carriers only after the cell is
Configuration Rule and
congestioned.
Adjustment Suggestion
If this parameter is too small, too many baseband resources are
occupied when cells are idle.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters bbReleaseTraThs

Relationship BBURequestTRAThs>BBUReleaseTRAThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1381

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.31.4 Traffic threshold for release baseband


Full Name Traffic threshold for release baseband

Abbreviation bbReleaseTraThs

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a traffic threshold for baseband resource re-


lease. The BSC selects specific TRXs to release baseband resources
when detecting in a measurement report that the traffic in a cell is less
Description than this threshold

Instance Site

Value Range and Step 0..100

Unit %

Default Value 0

If the default value is set to 0, baseband resources are not released


Default Value
though the cell is idle. The default value is to ensure that the baseband
Configuration Reason
resources are being applied.

If this parameter is too large, baseband resources are released though


Configuration Rule and
the cell is very busy. If this parameter is too small, the baseband
Adjustment Suggestion
resources are not released though the cell is very idle.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters bbRequestTraThs

Relationship BBURequestTRAThs>BBUReleaseTRAThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1382

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.31.5 Channel busy threshold for urgent allocate baseband


Full Name Channel busy threshold for urgent allocate baseband

Abbreviation bbOverThs

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a channel busy threshold for urgent allocation


of baseband resources. When the radio channel busy ratio of a cell is
greater than this threshold due to sudden traffic increase, specific TRXs
Description are selected to allocate more baseband resources.

Instance Site

Value Range and Step 0..100

Unit %

Default Value 80

Default Value When the cell channel occupation in real time is high, immediately select
Configuration Reason the carrier to allocate baseband resources.

If this parameter is too large, the cell is even more congestioned when
baseband resources are allocated for carriers only after the cell is
Configuration Rule and
congestioned.
Adjustment Suggestion
If this parameter is too small, too many baseband resources are
occupied when cells are idle.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters bbLowerThs

Relationship BBUOVERThs>BBULOWERThs

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1383

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.31.6 Channel busy threshold for urgent release baseband


Full Name Channel busy threshold for urgent release baseband

Abbreviation bbLowerThs

Managed Object Site baseband share Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter specifies a channel busy threshold for urgent release of


baseband resources. When a cell fails to request baseband resources,
the BSC searches for cells whose radio channel busy ratios are less than
this threshold, and then selects a TRX to release some baseband re-
Description sources after locating such cells.

Instance Site

Value Range and Step 0..100

Unit %

Default Value 60

Default Value
Configuration Reason The cell does not release baseband resources when it is busy.

If this parameter is too large, more cells can be selected to release


Configuration Rule and
baseband resources.If this parameter is too small, less cells can be
Adjustment Suggestion
selected to release baseband resources.

Change Mode Offline

Related features ZGO-03-04-005

Related Parameters bbOverThs

Relationship BBUOVERThs>BBULOWERThs

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Site Information


OMC Access Path
Configuration->Site baseband share Configuration

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1384

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.32 Bvc (GBvc)


2.32.1 Bvc ID
Full Name Bvc ID

Abbreviation GBvc

Managed Object Bvc

3GPP Name N/A

3GPP Reference N/A

Description Bvc ID

Instance None

Value Range and Step 1..8

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Bvc

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.32.2 BvcI
Full Name BvcI

2-1385

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation BVCI

Managed Object Bvc

3GPP Name BVCI

3GPP Reference 3GPP TS 48.019

BSSGP Virtual Connection (BVC) provides an approach for


communication between different BSSGP entities. The peer-to-peer
Point-to-Point (PTP) or Point-to-Multipoint (PTM) or inter-signaling entity
transmission of BSSGP PDUs lies on BVC.
Each virtual connection has one identifier, that is, BVCI. It enables the
network service layer at the bottom layer to route BSSGP PDUs to the
peer entity very effectively. One NSE carries only one signaling BVC
Description (BVCI=0).

Instance Cell

Value Range and Step 2..65535

Unit N/A

Default Value NA

Default Value
Configuration Reason Configuration based on actual

Under one NSE, each GPRS cell can be uniquely


identified by the BVCI. One NSE carries only one signaling BVC
(BVCI=0).
Configuration Rule and
The value should not be adjusted and is dependent upon the actual
Adjustment Suggestion
cell configuration. This parameter must be unique under one SGSN.If
the configuration of this parameter is incorrect, the PS services
of the cell may be unavailable.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Gb

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Bvc

Parameter Modifying
Version N/A

2-1386

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.32.3 FR NSE DN
Full Name FR NSE DN

Abbreviation refGFrGbNse

Managed Object Bvc

3GPP Name N/A

3GPP Reference N/A

Description The DN of FR NS, to find the corresponding NSEI.

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason A planned interconnection parameter.

Configuration Rule and


Adjustment Suggestion Planned interconnection parameter.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Bvc

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1387

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.32.4 IP NSE DN
Full Name IP NSE DN

Abbreviation refGIpGbNse

Managed Object Bvc

3GPP Name N/A

3GPP Reference N/A

Description The DN of IP NSE,to find the corresponding NSEI.

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason A planned interconnection parameter.

Configuration Rule and


Adjustment Suggestion Planned interconnection parameter.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Bvc

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33 GPRS Configuration(GCellPs)


2.33.1 GPRS Configuration ID
Full Name GPRS Configuration ID

2-1388

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation GCellPs

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

Description GPRS Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.2 T3168
Full Name T3168

Abbreviation t3168

Managed Object GPRS Configuration

3GPP Name T3168

3GPP Reference 3GPP TS 44.060

2-1389

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is used on the MS side. It belongs to GPRS Cell Options


IE parameters. It is broadcast to MSs in the SI13 message over BCCH
and the PSI13 message over PACCH. It defines when to stop waiting
for a PACKET UPLINK ASSIGNMENT message after an MS sends a
PACKET RESOURCE REQUEST message, a PACKET DOWNLINK
ACK/NACK message carrying Channel Request Description IE, or a
PACKET CONTROL ACKNOWLEDGEMENT message requesting new
TBF.
Timer Started: At sending the PACKET RESOURCE REQUEST
message, the PACKET DOWNLINK ACK/NACK message carrying
Channel Request Description IE, or the PACKET CONTROL
ACKNOWLEDGEMENT message requesting new TBF.
Timer Stopped: On receipt of a PACKET UPLINK ASSIGNMENT, or
a PACKET TIMESLOT RECONFIGURE message that assigns uplink
TBF. On receipt of a PACKET ACCESS REJECT message that rejects
uplink TBFs.
Action at expiry: Reinitiate the packet access procedure or retransmit the
Description PACKET RESOURCE REQUEST or PACKET DOWNLINK ACK/NACK.

Instance Cell

0:0.5
1:1
2:1.5
3:2
4:2.5
5:3
6:3.5
Value Range and Step 7:4

Unit s

Default Value 4

Default Value
Configuration Reason The parameter is set in accordance with general radio environment.

The value influences the uplink TBF establishment time and uplink TBF
establishment successful rate. The smaller the value is, the shorter the
time of waiting for packet uplink assignment.
The lower the uplink TBF establishment successful rate is, the shorter is
the average delay of packet access. The poorer the radio environment
Configuration Rule and is, the lower the TBF establishment successful rate is. If the value is set
Adjustment Suggestion as too small, the request for packet access is more likely to occur, and
the probability of the network performing reassignment increases, which
lead to a waste of system resources. The larger the value is, the longer
the is time of waiting for packet uplink assignment.
The lower the uplink TBF establishment successful rate is, the longer is
the average delay of packet access. The poorer the radio environment

2-1390

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

is, the higher the TBF establishment successful rate is. You can set
the value in accordance with the network delay requirement and radio
quality.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.3 T3192
Full Name T3192

Abbreviation t3192

Managed Object GPRS Configuration

3GPP Name T3192

3GPP Reference 3GPP TS 44.060

This parameter is used on the MS side. It belongs to GPRS Cell


Options IE parameters. It is broadcast to MSs in the SI13 message over
BCCH and the PSI13 message over PACCH. During packet downlink
transmission, timer T3192 is triggered when the MS receives all the
RLC data blocks. When timer T3192 expires, the MS shall release the
resources associated with the TBF (e.g. TFI) and begin to monitor its
paging channel.
Timer Started:
At sending the PACKET DOWNLINK ACK/NACK with the Final Ack
Indicator=1, or at sending the PACKET CONTROL ACK as a response
to final RLC data block in unacknowledged mode.
Description
Timer Restarted:

2-1391

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Restarted at sending the PACKET DOWNLINK ACK/NACK with the


Final Ack Indicator=1, or at sending the PACKET CONTROL ACK as a
response to final RLC data block in unacknowledged mode.
Action at expiry:
If the MS is in packet transfer mode and there are no other ongoing
TBFs, it shall release the resources, stop monitoring the PDCHs, and
begin to monitor the paging channel.
Timer Stopped:
Stopped at the reception of a PACKET DOWNLINK ASSIGNMENT or
PACKET TIMESLOT RECONFIGURE message during the operation of
T3192.

Instance Cell

0: 500
1: 1000
2: 1500
3: 0
4: 80
5: 120
6: 160
Value Range and Step 7: 200

Unit ms

Default Value 0

Default Value
Configuration Reason according to the general radio condition(normally is 500ms)

The larger the value is, the longer the duration of reserving TBF-related
resources (including TF and timeslots). Consequently, invalid resources
are occupied for a long time and congestion is likely to occur if there is
no downlink data transmission subsequently.
The smaller the value is, the faster the MS is to release TBF resources,
and the longer is the TBF establishment because the network must
initiate the paging or the immediate assignment process when new
downlink data occurs to the network. If T3192 is not timed out when the
Configuration Rule and
new downlink data occurs to the network, the network can directly send
Adjustment Suggestion
the PACKET DOWNLINK ASSIGNMENT message, to establish a new
downlink TBF and shorten the establishment time of TBF.
The value is set in the following two ways:
1. The value is set appropriately through evaluating the interval of
transmitting the downlink data for every two times.
2. The value is set as a large value to a great extent when the loads,
service models, and network resources in the cell are adequate, to
reduce TBF establishment time and improve data transmission rate.

2-1392

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The network side has a corresponding timer T3193 whose value should
be greater than that of T3192.

Change Mode Offline

Related features N/A

Related Parameters t3193

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.4 T3193
Full Name T3193

Abbreviation t3193

Managed Object GPRS Configuration

3GPP Name T3193

3GPP Reference 3GPP TS 44.060

This parameter is timer T3193 which is used for protection on TBF


release during downlink packet transmission. For details, see the
description of T3191. The conditions of timer start, stop, and timeout
actions are as follows.
Time start/restart: If BSC receives PACKET DOWNLINK ACK/NACK
(RLC mode is ACK mode) or PACKET CONTROL ACKNOWLEDGE
(RLC mode is NACK mode) message with FAI domain = 1, T3191 stops
and T3193 starts.
Timer stop: new downlink TBF in the network uses the same TFI.
Timeout action: Release the TFI resource.
The parameter value should be greater than timer T3192, to ensure that
Description MS releases the TFI prior to BSC.

Instance BSC

2-1393

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..65535

Unit 10ms

Default Value 51

Default Value
Configuration Reason Depends on Protocol Recommended Value

When T3192/T3193 uses the delay policy, downlink resources are


wasted to some extent, but the network can directly send the PACKET
DOWNLINK ASSIGNMENT message to establish a new downlink
TBF within the time counted by T3192/T3193. In this case, TBF
establishment time is reduced.
If T3192/T3193 is timed out, the network side can only initiate the
paging or the immediate procedure (If the MS is in the ready state) to
Configuration Rule and establish TBF. In this case, downlink TBF establishment takes a long
Adjustment Suggestion period of rime.
Therefore, setting of the T3192/T3193 should take the service load
in the cell into full consideration. The value should be as large as
possible when network resources are adequate, to reduce new TBF
establishment time, improve data transmission rate, and effectively
improve the index related to downlink throughput.
T3193 is a parameter at the network side, so its value should be slightly
greater than that of T3192.

Change Mode Offline

Related features N/A

Related Parameters t3192

Timer T3193 of global resources must be longer


Relationship
than timer T3192 of all cells.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1394

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.33.5 DRX mode holding timer


Full Name DRX mode holding timer

Abbreviation drxTimeMax

Managed Object GPRS Configuration

3GPP Name DRX_TIMER_MAX

3GPP Reference 3GPP TS 44.060

This parameter is used on the MS side. It belongs to GPRS Cell


Options IE parameters. It is broadcast to MSs in the SI13 message over
BCCH and the PSI13 message over PACCH. The DRX_TIMER_MAX
parameter controls the duration of non-DRX mode. There are two cases
when the MS shall enter a non-DRX mode period.
1) At the transition from the packet transfer mode to the packet idle
mode.
2) At the transition from the dual transfer mode (DTM mode) to the
dedicated mode or packet idle mode.
The non_DRX mode duration is determined by the lower value
between NON_DRX_TIMER and DRX_TIMER_MAX parameter. The
DRX_TIMER_MAX parameter is broadcast in the cell system message.
The NON_DRX_TIMER parameter is negotiated with the CN side during
Description the GPRS ATTACH procedure.

Instance Cell

0: 0(0)
1: 1(1)
2: 2(2)
3: 4(4)
4: 8(8)
5: 16(16)
6: 32(32)
Value Range and Step 7: 64(64)

Unit s

Default Value 2

BS_PA_MFRMS default value is 5, the paging cycle is 1.18s, the


Default Value
parameter is more than paging cycle, TBF will be fast established in
Configuration Reason
this period time.

2-1395

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Under non-DRX mode, it takes about 40 ms to send the IMMEDIATE


ASSIGNMENT command on PCH/AGCH, which is muh faster than the
command is sent under DRX mode. TBF establishment time is less
under non-DRX mode than that under DRX mode. Under DRX mode,
the MS can only monitor the paging message on a paging group, then
receive the IMMEDIATE PAGING MESSAGE on all paging blocks and
AGCH reserved blocks. Receiving the paging message takes a long
Configuration Rule and
period of time that is about half of the paging meulti-frame period. It is
Adjustment Suggestion
235 ms when BS_PA_MFRMS is 2. The MS consumes more power
under non-DRX mode.
If this parameter value is set to a large value, TBF establishment time
is reduced but power consumption of the MS increases. If it is set to a
small value, power consumption of the MS is saved, system signalling
load increases because the paging procedure increases under DRX
mode, and data transmission delay increases.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.6 MAX blocks transmission in each TS


Full Name MAX blocks transmission in each TS

Abbreviation bsCvMax

Managed Object GPRS Configuration

3GPP Name BS_CV_MAX

3GPP Reference 3GPP TS 44.060

2-1396

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used on the MS side. It belongs to GPRS Cell Options


IE parameters. If no PBCCH is available, it is broadcast to MSs in
the SI13 message. BS_CV_MAX indicates the maximum value of
countdown value (start countdown value), which is used for calculating
the Countdown Value (VC).
The MS shall send the Countdown Value (CV) in each uplink RLC data
block to indicate the absolute sequence number BSN of the RLC data
blocks to be transmitted in the uplink TBF. The CV shall be calculated
as follows:
where:
TBC = total number of RLC data blocks currently to be transmitted
in the TBF.
BSN' = absolute block sequence number of the RLC data block, with
range from 0 to (TBC - 1).
NTS = number of timeslots assigned to the uplink TBF in the assignment
message, with range 1 to 8.
K = 2 when commanded MCS is MCS-7, MCS-8 or MCS-9, otherwise
K=1,
the function round() rounds upwards to the nearest integer.
The division operation is non-integer and results in zero only for (TBC
- BSN' - 1) = 0.
This parmeter is also used to determine the duration for MSs to use
timer T3200 in non-DRX mode:
T3200 = 4* the time defined by BS_CV_MAX
In addition, this parameter determines the N3104max value.
Description N3104_MAX = 3 * (BS_CV_MAX + 3) * NTS

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 15

Default Value the parameter effect T3200 and N3104MAX for MS to tolerate abnormal,
Configuration Reason so the highest value is better.

If the network does not enable the extended


uplink function or the MS does not support GERA package 1, the MS
does not support the extended uplink function. When the MS enters
the countdown process, all the new uplink LLC data should be sent
Configuration Rule and in one TBF, and the initial value of the countdown number should not
Adjustment Suggestion be too large in accordance with the network performance. In addition,
in the current network, some MSs do not support the maximum value
15. Therefore, this parameter value can be reduced appropriately.If
the network enables the extended uplink function and the MS supports
GERA package 1, it is recommended to set the value as maximum if no

2-1397

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

negative influence occurs.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.7 Packet control acknowledgement type


Full Name Packet control acknowledgement type

Abbreviation ctrAckType

Managed Object GPRS Configuration

3GPP Name CONTROL_ACK_TYPE

3GPP Reference 3GPP TS 44.060

CONTROL_ACK_TYPE is a parameter broadcast in system information


13.
This field is the binary representation of the default format of the
PACKET CONTROL ACKNOWLEDGMENT message:
0 default format is four access bursts
Description 1 default format is RLC/MAC control block.

Instance Cell

0: Four access bursts


Value Range and Step 1: RLC/MAC control block

Unit N/A

Default Value 1

Default Value
Configuration Reason generally apply RLC/MAC control block

2-1398

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

These two methods do not influence the successful


Configuration Rule and rate of sending the PACKET CONTROL ACKNOWLEDGEMENT
Adjustment Suggestion message, so the
default value is used.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.8 Access burst type


Full Name Access burst type

Abbreviation accessType

Managed Object GPRS Configuration

3GPP Name ACCESS_BURST_TYPE

3GPP Reference 3GPP TS 44.060

The ACCESS_BURST_TYPE field indicates if the 8 or 11 bit format


shall be used in the PACKET CHANNEL REQUEST message, the
PTCCH uplink block (3GPP TS 44.004) and in the PACKET CONTROL
ACKNOWLEDGMENT message when the format is four access bursts.
The field is coded according to the following table:
0 8-bit format shall be used
Description 1 11-bit format shall be used

Instance Cell

0: 8 bits
Value Range and Step 1: 11 bits

Unit N/A

2-1399

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

11bits can minimize the C/I requirements for


Configuration Rule and
uplink signalling transfer. This function should be enabled with caution
Adjustment Suggestion
if you do not have much on-site operation experience.

Change Mode Offline

Related features ZGB-03-05-005 8/11 bit Access Burst

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.9 N3102 decrease step


Full Name N3102 decrease step

Abbreviation panDec

Managed Object GPRS Configuration

3GPP Name PAN_DEC

3GPP Reference 3GPP TS 44.060

This parameter is used on the MS side. It belongs to GPRS Cell Options


parameters. It is broadcast to MSs in the SI13 message over BCCH and
the PSI13 message over PACCH, indicating the values of PAN_DEC,
PAN_INC, and PAN_MAX. Each time cell reselection is done for an MS,
the counter N3102 is reset to the PanMax value.
When the MS receives a PACKET UPLINK ACK/NACK message that
allows the advancement of V(S), the timer T3182 starts. When the
MS receives the PACKET UPLINK ACK/NACK message that makes
V(S) smaller than V(A) + W(S), T3182 stops. If T3182 expires, the MS

Description decrements N3102 by the broadcast value PAN_DEC. When N3102 < 0

2-1400

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

is reached, the MS performs an abnormal release with cell re-selection.


When the value of any of PAN_DEC, PAN_INC, and PAN_MAX is 0,
N3102 is invalid.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
Value Range and Step 7: 32

Unit N/A

Default Value 0

to avoid TBF abnormal release and cell reselection, PanMax applies the
Default Value
maximum value and PanDec applies the minimum value, PanInc applies
Configuration Reason
2 times of PanDec in refference to CS RLT.

add up the PAN_MAX and PAN_INC, cut down the PAN_DEC, the
posibility of abnormal release and cell reseletion owing to not receiving
Configuration Rule and PACKT UPLINK ACK will be cut down , but the window stall will keep
Adjustment Suggestion longer time and the resoure can not be used by other MS.On the
controry, TBF abnormal release and cell reseletion will happen more
frequently and normal release number will be cut down.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1401

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.33.10 N3102 increase step


Full Name N3102 increase step

Abbreviation panInc

Managed Object GPRS Configuration

3GPP Name PAN_INC

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. They belong to the GPRS cell
option parameters, and they are broadcast to the MS in the PSI1, PSI13
and SI13 messages, indicating the values of parameters of PAN_DEC,
PAN_INC and PAN_MAX. After each cell reselection, the MS will set
the initial value of N3102 as the PanMax value.
When the MS receives the PACKET UPLINK ACK/NACK message to
move V(S) forward, it adds PanInc to N3102 (but the maximum value
shall not exceed PanMax).
When the MS detects the stall condition (V(S) = V(A) + W(S)), T3182 will
start. When it receives the PACKET UPLINK ACK/NACK message
that enables V(S) < V(A) + W(S), T3182 stops. If T3182 expires, the MS
will subtract PanDec from N3102. When the condition satisfies N3102 <
0, the MS will take cell reselection as abnormal release.
Description When one of PanDec, PanInc, and PanMax is zero, N3102 is invalid.

Instance Cell

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
Value Range and Step 7: 32

Unit N/A

Default Value 1

to avoid TBF abnormal release and cell reselection, PanMax applies the
Default Value
maximum value and PanDec applies the minimum value, PanInc applies
Configuration Reason
2 times of PanDec in refference to CS RLT.

add up the PAN_MAX and PAN_INC, cut down the PAN_DEC, the
posibility of abnormal release and cell reseletion owing to not receiving
Configuration Rule and PACKT UPLINK ACK will be cut down , but the window stall will keep
Adjustment Suggestion longer time and the resoure can not be used by other MS.On the
controry, TBF abnormal release and cell reseletion will happen more
frequently and normal release number will be cut down.

2-1402

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.11 N3102 max


Full Name N3102 max

Abbreviation panMax

Managed Object GPRS Configuration

3GPP Name PAN_MAX

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. They belong to the GPRS cell
option parameters, and they are broadcast to the MS in the PSI1, PSI13
and SI13 messages, indicating the values of parameters of PAN_DEC,
PAN_INC and PAN_MAX. After each cell reselection, the MS will set
the initial value of N3102 as the PanMax value.
When the MS receives the PACKET UPLINK ACK/NACK message to
move V(S) forward, it adds PanInc to N3102 (but the maximum value
shall not exceed PanMax).
When the MS detects the stall condition (V(S) = V(A) + W(S)), T3182 will
start. When it receives the PACKET UPLINK ACK/NACK message that
enables V(S) < V(A) + W(S), T3182 stops. If T3182 expires, the MS will
subtract PanDec from N3102. When the condition satisfies N3102 < 0,
the MS will take cell reselection as abnormal release.
Description When one of PanDec, PanInc, and PanMax is zero, N3102 is invalid.

Instance Cell

2-1403

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
Value Range and Step 7: 32

Unit N/A

Default Value 7

to avoid TBF abnormal release and cell reselection, PanMax applies the
Default Value
maximum value and PanDec applies the minimum value, PanInc applies
Configuration Reason
2 times of PanDec in refference to CS RLT.

add up the PAN_MAX and PAN_INC, cut down the PAN_DEC, the
posibility of abnormal release and cell reseletion owing to not receiving
Configuration Rule and PACKT UPLINK ACK will be cut down , but the window stall will keep
Adjustment Suggestion longer time and the resoure can not be used by other MS.On the
controry, TBF abnormal release and cell reseletion will happen more
frequently and normal release number will be cut down.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.12 Route area color code


Full Name Route area color code

Abbreviation raColor

2-1404

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object GPRS Configuration

3GPP Name RA COLOUR

3GPP Reference 3GPP TS 44.018

Parameter used at the MS side. It is broadcast to the MS in SI3, SI4,


SI7 and SI8. RaColor is similar to the BCC function in the GSM system.
In some cases, such as inter-BSC cell reselection, the GPRS network
assigns different RaColor values to adjacent cells with the same route
area code to ensure that MS can initiate the Routing Area Updating
process.
In this way, when MS receives different RaColor values in the cells with
the same routing area code, it initiates the Routing Area Updating
Description process similar as when it spans two different routing areas.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and Generally, RAC and LA are consistent with each
Adjustment Suggestion other. It is recommended to set the value as 0.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1405

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.33.13 Extended measurement report order


Full Name Extended measurement report order

Abbreviation meaOrder

Managed Object GPRS Configuration

3GPP Name MEASUREMENT_ORDER

3GPP Reference 3GPP TS 44.060

The MEASUREMENT ORDER field indicates if set = 0 that the mobile


station is in control of the cell re-selection in both packet idle mode and
packet transfer mode (= NC0 in 3GPP TS 45.008) and that the mobile
station shall not send any measurement reports to the network (= NC0
and = EM0 in 3GPP TS 45.008). It also indicates that the Optional PSI5
message is not broadcast.
If set = 1 the mobile station shall send measurement reports for cell
re-selection and/or for extended measurements to the network. Further
cell re-selection and measurement details are included in the PSI5
Description message.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

Configuration Rule and This parameter is related to the configuration


Adjustment Suggestion of PBCCH channel, so it is recommended not to use the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

2-1406

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.33.14 Network control order


Full Name Network control order

Abbreviation ctrlOrder

Managed Object GPRS Configuration

3GPP Name NETWORK_CONTROL_ORDER

3GPP Reference 3GPP TS 45.008

The network may request measurement reports from the MS and


control its cell re selection. This is indicated by the parameter
NETWORK_CONTROL_ORDER. The meaning of the different
parameter values is specified as follows:
NC0 Normal MS control
The MS shall perform autonomous cell re-selection.
NC1 MS control with measurement reports
The MS shall send measurement reports to the network as defined in
subclause 10.1.4.1.
The MS shall perform autonomous cell re-selection.
NC2 Network control
The MS shall send measurement reports to the network as defined in
subclause 10.1.4.1.
The MS shall only perform autonomous cell re-selection when the
reselection is triggered by a downlink signalling failure as defined in
subclause 6.5 or a random access failure as defined in 3GPP TS 44.018
and 3GPP TS 44.060 or if the cell is barred or the C1 criterion falls
below zero. The MS shall only determine whether the cell is barred
Description once camped on the cell.

Instance Cell

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value
Configuration Reason refer to the general application

Configuration Rule and Setting of the value is in accordance with


Adjustment Suggestion the network load, network plan and service requirements.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

2-1407

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.15 CCCH SplitPGCycle support


Full Name CCCH SplitPGCycle support

Abbreviation spgcSuport

Managed Object GPRS Configuration

3GPP Name SPLIT_PG_CYCLE

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side and the BTS side. System
broadcasts to MS through PSI3 and SI13 messages.
CCCH SplitPgCycle support indicates if to support the SplitPgCycle
function on CCCH. Split_Pg_Cycle means sending the PACKET
IMMEDIATE ASSIGNMENT, PACKET PAGING and PACKET
Description IMMEDIATE ASSIGNMENT REJECT messages on multiple blocks.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

This function should be supported by the MS,


Configuration Rule and
the value should be negotiated with CN and influences the calculation
Adjustment Suggestion
of MS paging groups, so it is recommended not to enable the function.

Change Mode Offline

2-1408

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.16 Packet access priority threshold


Full Name Packet access priority threshold

Abbreviation priAcThr

Managed Object GPRS Configuration

3GPP Name PRIORITY_ACCESS_THR

3GPP Reference 3GPP TS 44.018

Parameter used at the MS side. It is broadcast to the MS in the PSI13 and


SI13 messages, indicating the priority level of MS packet access allowed
Description by the cell. as similar to the function of ACCESS CLASS.

Instance Cell

Value Range and Step 0, 3, 4, 5, 6, 7

Unit N/A

Default Value 6

Default Value
Configuration Reason The following are allowed access to normal

Configuration Rule and If the packet access of users should be limited


Adjustment Suggestion by the service priority, the value should be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1409

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.17 Extended paging support


Full Name Extended paging support

Abbreviation epageMode

Managed Object GPRS Configuration

3GPP Name extended paging

3GPP Reference 3GPP TS 44.060

This parameter information is one of the page modes, indicating whether


to support extended paging.Extended paging means that MS still can re-
ceive and analyze the message within the 3rd interval after the block is
Description indicated by its paging group.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

The extended paging mode is configured to relieve the temporary


overload of a subchannel. The mode enables a paging message, which
Configuration Rule and
is usually transmitted over a paging subchannel (PCH BLOCK) of the
Adjustment Suggestion
CCCH, to be transmitted over the paging block after the next paging
block.

Change Mode Offline

Related features N/A

2-1410

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.18 USF granularity


Full Name USF granularity

Abbreviation usfGranularity

Managed Object GPRS Configuration

3GPP Name USF_GRANULARITY

3GPP Reference 3GPP TS44.060

This parameter information is assigned to the MS in the PACKET UP-


LINK ASSIGNMENT message, indicating that the network allocates up-
link block granularity for the GPRS MS when the cell uses the medium
Description control mode of dynamic allocation.

Instance Cell

0: allocation granularity is 1 for uplink block


Value Range and Step 1: allocation granularity is 4 for uplink block

Unit N/A

Default Value 0

Default Value
Configuration Reason Consider the RLC block utilization and PS traffic model

Configuration Rule and The value is dependent upon the block utilization,
Adjustment Suggestion uplink and downlink data transmission, and radio resources.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1411

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.19 Cell support extended uplink TBF


Full Name Cell support extended uplink TBF

Abbreviation EXT_UTBF

Managed Object GPRS Configuration

3GPP Name NW_EXT_UTBF

3GPP Reference 3GPP TS44.060

This parameter indicates if the cell supports extended uplink TBF. After
BSS receives CV=0 uplink block, if the cell supports extended uplink
TBF, it enters into extended uplink TBF status. At this time, it continues
assign uplink block resource to MS. If new uplink data is required to send
during extended uplink, re-establishment of uplink TBF is not required.
This function requires extended uplink function shall be supported at
Description MS side.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason Consider MS capability and PS traffic model

2-1412

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to the TBF data transmission condition, set whether TBF


continues to wait for data transmission after the last data block of the
Configuration Rule and TBF is successfully transmitted, to avoid the re-setup of the TBF, reduce
Adjustment Suggestion the back-and-forth delay, and accelerate the transmission of the uplink
data. (The time delay of sent and receive will be shorten after the
function is open.)

Change Mode Offline

Related features ZGB-03-05-014 Delayed TBF Release in UL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.20 Extended uplink dynamic allocation support


Full Name Extended uplink dynamic allocation support

Abbreviation exUpDynSupport

Managed Object GPRS Configuration

3GPP Name EXTENDED_DYNAMIC_ALLOCATION

3GPP Reference 3GPP TS44.060

This parameter indicates if cell supports extended uplink dynamic alloca-


tion. While using this function, the MS only need listen USF allocation
with the least timeslot, so you can determine to send uplink block on all
Description allocated uplink timeslot.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

2-1413

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason Consider Radio Resource Utilization and PS tarffic Model

The value is dependent upon the function supported


by the MS, PS service data transmission on the uplink, and uplink
Configuration Rule and
radio resources. If the transmission on the uplink takes priority
Adjustment Suggestion
or uplink resources are adequate, the uplink transmission rate can
be improved with this function enabled.

Change Mode Offline

Related features ZGO-03-02-007 Extended Dynamic Allocation

Related Parameters ExUpDynSupport

Relationship This parameter is valid if the BSC-level parameter is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.21 Uplink delay time


Full Name Uplink delay time

Abbreviation ulDelayTime

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter describes the uplink TBF delay time. When the uplink
TBF is released, if the extended uplink TBF function is not supported,
start this timer to access to the uplink delay state and wait for the arrival
of the downlink LLC.
Description The uplink TBF is released if the timer expires.

Instance Cell

Value Range and Step 0..4000

Unit ms

2-1414

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 1000

Default Value
Configuration Reason Consider Gb Interface RTT

The value is dependent upon the downlink delay


Configuration Rule and time at the Gb interface. If the delay time is long and the interval
Adjustment Suggestion between the uplink and downlink data transmission is long, increase
the delay time as needed.

Change Mode Offline

Related features ZGB-03-05-014 Delayed TBF Release in UL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.22 Downlink delay time


Full Name Downlink delay time

Abbreviation dlDelayTime

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter indicates the downlink TBF delay time. When the down-
link TBF is released, start this timer to access to the delay state and wait
for new downlink LLC frame. The downlink TBF is released if the timer
Description expires.

Instance Cell

Value Range and Step 500..4000

Unit ms

2-1415

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 2000

Default Value
Configuration Reason Consider RTT between MS and CN

The value is dependent upon the delay time


Configuration Rule and
between the MS and CN. If the downlink data is discontinuous and the
Adjustment Suggestion
interval is long, increase the delay time as needed.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.23 Extended uplink TBF time


Full Name Extended uplink TBF time

Abbreviation extUlTBFTime

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the extended uplink TBF delay time. When the
uplink TBF is released, if the extended uplink TBF function is supported,
start this timer to access to the extended uplink TBF state and wait for
Description new uplink LLC frame. The uplink TBF is released if the timer expires.

Instance Cell

Value Range and Step 0..3000

Unit ms

Default Value 1500

2-1416

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason general value

A larger value indicates a faster uplink re-establishment but


Configuration Rule and
lower resource utilization. A lower value indicates a slower uplink
Adjustment Suggestion
re-establishment but improved resource utilization.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.24 RRBP Interval of GPRS downlink TBF


Full Name RRBP Interval of GPRS downlink TBF

Abbreviation gprsDlRRBPInterval

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

Interval that downlink Gprs TBF requires MS to send Packet Downlink


Description Ack/Nack.

Instance Cell

Value Range and Step 3..20

Unit N/A

Default Value 10

Default Value
Configuration Reason Set it based on normal radio conditions.

2-1417

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is set to a low value, for GPRS service, MS's downlink
receiving bitmap information can be notified to BSC in a faster way, but
Configuration Rule and more uplink signaling blocks are occupied. If this parameter is set to a
Adjustment Suggestion great value, MS's downlink receiving bitmap information are notified to
BSC slowly and less uplink signaling blocks are occupied. The value
needs no modification unless specially required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.25 Interval number of uplink GPRS TBFs ACK


Full Name Interval number of uplink GPRS TBFs ACK

Abbreviation gprsUlAckInterval

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the interval that the uplink GPRS TBF network
Description sends packet uplink ACK/Nack to the MS.

Instance Cell

Value Range and Step 3..20

Unit N/A

Default Value 10

Default Value It is recommended to set the default value as 10 when the percentage
Configuration Reason of the downlink voice RQ0~5 is around 97%.

2-1418

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The smaller the value is, the fewer the GPRS


services are, the faster the uplink received bitmap information of
the MS can be notified to BSC, and the more the downlink signalling
Configuration Rule and blocks are occupied. The larger the value is, the more the GPRS
Adjustment Suggestion services
are, the slower the uplink received bitmap information of the MS can
be notified to BSC, and the fewer the downlink signalling blocks are
occupied. If no special requirement, the value should not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.26 Uplink measurement report period


Full Name Uplink measurement report period

Abbreviation ulMeasurePeriod

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

This parameter is used by UPPB, describing the uplink measurement re-


port period reported by BTS and handled by BSC. The measurement re-
port is obtained by the BTS in accordance with the uplink level and quality
Description of the MS.

Instance Cell

Value Range and Step 400..2000

Unit ms

2-1419

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 800

Default Value Depends on the number of received measure report and the measure
Configuration Reason report window

Configuration Rule and The value is dependent upon the number of the
Adjustment Suggestion received measurement reports, and the window size.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.27 T3142
Full Name T3142

Abbreviation t3142

Managed Object GPRS Configuration

3GPP Name T3142

3GPP Reference 3GPP TS 44.018

The timer is used during packet access on CCCH and during packet
access while in dedicated mode. It is started after the receipt of an
IMMEDIATE ASSIGNMENT REJECT or a DTM REJECT message.
Its value is given by the network in the IMMEDIATE ASSIGNMENT
REJECT or DTM REJECT message.
The mobile station is not allowed to make a new attempt for packet
access in the same cell until T3142 expires, but may attempt packet
access in an other cell after successful cell reselection for radio
conditions reasons (see 3GPP TS 45.008). The value of the wait
Description indication (i.e. T3142) relates to the cell from which it was received.

2-1420

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The mobile station may initiate RR connection establishment in the


same cell before T3142 has expired.

Instance Cell

Value Range and Step 0..255

Unit s

Default Value 5

Default Value
Configuration Reason according to the general network traffic load

Configuration Rule and when the RACH resource is inadequate, the value
Adjustment Suggestion should be lager.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.28 T3172
Full Name T3172

Abbreviation t3172

Managed Object GPRS Configuration

3GPP Name T3172

3GPP Reference 3GPP TS 44.060

2-1421

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is used at the MS side. It is notified to the MS through


WAIT_INDICATION carried in the PACKET ACCESS REJECT message.
This timer starts if the MS receives PACKET ACCESS REJECT
message
during packet access. The MS disables packet access if this timer
is timeout. The MS changes to idle status if this timer is timeout
prior to receiving assignment message. After this timer timeout, the
MS does not disable packet access in this cell, but shall not take
channel request as paging response except the MS receives paging
request
Description message.

Instance Cell

Value Range and Step 0..255

Unit s

Default Value 5

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

Configuration Rule and when the RACH resource is inadequate, the value
Adjustment Suggestion should be lager.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.29 Max times of packet assignment resend


Full Name Max times of packet assignment resend

2-1422

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation psAssReSendMax

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

When the number of times of resending assignment messages exceeds


the maximum number of times of resending packet assignment
messages specified at background, the TBF Release message is resent
to notify MS to release TBF.
During the service process, if CTRL_ACK is lost, then judge the
assignment type that MAC is waiting for. If the assignment type is
consistent with that MAC is waiting for, then the number of resending
assignment messages increments and the uplink/downlink assignment
message is resent. If it exceeds the maximum number of resending
assignment messages but the assignment acknowledgement message
from MS is still not received, then the TBF Release message is issued
from network and TBF is released. If the assignment type is inconsistent
with that MAC is waiting for, then the assignment timer is cleared and
the assignment message will not be resent.
Description This parameter is supported from version 6.20.21.

Instance Cell

Value Range and Step 0..10

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

When this function is enabled, if the assignment


Configuration Rule and
message is lost, it will be re-sent to keep its service from abnormal
Adjustment Suggestion
due to poor radio quality or other abnormal cases.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

2-1423

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.30 Enable no data during extended uplink TBF mode


Full Name Enable no data during extended uplink TBF mode

Abbreviation enExUpDynSupport

Managed Object GPRS Configuration

3GPP Name EXT_UTBF_NO_DATA

3GPP Reference 3GPP TS 44.060

This parameter indicates whether the mobile station during extended


uplink TBF mode may refrain from sending PACKET UPLINK DUMMY
CONTROL BLOCK messages when there is no other RLC/MAC block
ready to send in an uplink radio block allocated by the network.
0 The mobile station shall send a PACKET UPLINK DUMMY CONTROL
BLOCK message when there is no other RLC/MAC block ready to send
in an uplink radio block allocated by the network.
1 The mobile station may refrain from sending a PACKET UPLINK
DUMMY CONTROL BLOCK message when there is no other RLC/MAC
Description block ready to send in an uplink radio block allocated by the network.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason MS not supported normally, refer to application later

Configuration Rule and If the extended TBF function is enabled, it


Adjustment Suggestion is recommended to enable the function to save the MS' power.

Change Mode Offline

Related features ZGO-04-02-014 Extended uplink TBF mode

Related Parameters EXT_UTBF

Relationship This function should be enabled with EXT_UTBF.

Related Interfaces Um

Impact on Equipment 0

2-1424

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.31 Initial Coding Scheme of GPRS uplink TBF


Full Name Initial Coding Scheme of GPRS uplink TBF

Abbreviation gprsCodecInitUl

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the coding scheme used by the initial assign-
ment when the MS perfoms access at the uplink to implement GPRS ser-
Description vices.

Instance Cell

0: CS1
1: CS2
2: CS3
Value Range and Step 3: CS4

Unit N/A

Default Value 1

Default Value
Configuration Reason Use the middle value based on the network condition.

Configuration Rule and Set the parameter based on the network's radio quality. If the quality is
Adjustment Suggestion bad, set a low value. Otherwise, set a large value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1425

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.32 Initial Coding Scheme of GPRS downlink TBF


Full Name Initial Coding Scheme of GPRS downlink TBF

Abbreviation gprsCodecInitDl

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the coding scheme used by the initial assign-
ment when the MS perfoms access at the downlink to implement GPRS
Description services.

Instance Cell

0: CS1
1: CS2
2: CS3
Value Range and Step 3: CS4

Unit N/A

Default Value 1

Default Value
Configuration Reason Use the middle value based on the network condition.

Configuration Rule and Set the parameter based on the network's radio quality. If the quality is
Adjustment Suggestion bad, set a low value. Otherwise, set a large value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1426

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.33 Maximum coding scheme of GPRS uplink TBF


Full Name Maximum coding scheme of GPRS uplink TBF

Abbreviation gprsCodecMaxUl

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum coding scheme supported by the


Description uplink TBF when the MS performs GPRS services.

Instance Cell

0: CS1
1: CS2
2: CS3
Value Range and Step 3: CS4

Unit N/A

Default Value 3

Default Value
Configuration Reason Use the maximum value based on the network condition.

Configuration Rule and Set the parameter based on the network's radio quality. If the quality is
Adjustment Suggestion bad, set a low value. Otherwise, set a large value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1427

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.34 Maximum coding scheme of GPRS downlink TBF


Full Name Maximum coding scheme of GPRS downlink TBF

Abbreviation gprsCodecMaxDl

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum coding scheme supported by the


Description downlink TBF when the MS performs GPRS services.

Instance Cell

0: CS1
1: CS2
2: CS3
Value Range and Step 3: CS4

Unit N/A

Default Value 3

Default Value
Configuration Reason Use the maximum value based on the network condition.

Configuration Rule and Set the parameter based on the network's radio quality. If the quality is
Adjustment Suggestion bad, set a low value. Otherwise, set a large value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1428

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.35 PS preemption support


Full Name PS preemption support

Abbreviation psPreemptionInd

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

When PFC is supported, iBSC allocates radio resources according to


user's subscribed QoS parameter.
When the user's subscribed QoS parameter can't be satisfied and the
user's QoS parameter allows preemption, if this switch is enabled, the
Description user can preempt the radio resource with low priority.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

When this switch is enabled, the user can preempt


Configuration Rule and the radio resource with low priority services. This function is valid
Adjustment Suggestion until the PFC function is supported. You can decide whether to enable
this function according to the on-site requirement.

Change Mode Offline

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters PFCSupport

Relationship This parameter is valid until the FFC function is supported by the system.

Related Interfaces Um

2-1429

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.36 PS queuing support


Full Name PS queuing support

Abbreviation psQueueInd

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

If PFC is suppoted, iBSC allocates radio resource according to signature


QoS parameters from user side. When QoS guarantee rate for user
signature is unsatisfied (including through grabbing), and the QoS
parameter allows queuing, and if this parameter is enabled, iBSC
allocates radio resource to user according to Best Effort, and insert the
user into the queue, to wait for allocation of radio resource. Queuing
time can be gotten through PFC process; otherwise if this parameter is
disabled, access to this service is directly refused.
Description When this parameter is Yes, you can configure PsMaxQueueInstNum.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

When this switch is enabled, the IBSC allocates


radio resources to the user according to Best Effort, and make the
Configuration Rule and
user jump into the queue, to wait for the allocation of radio resources.
Adjustment Suggestion
This function needs to be supported by the FFC function and is better
to be disabled.

2-1430

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

ZGO-01-02-004 Streaming Service Policies


ZGO-01-02-003 Service based QoS
Related features ZGB-01-02-001 Quality of Service (QoS)

Related Parameters PFCSupport


PsMaxQueueInstNum

Relationship This parameter is valid until the FFC function is supported by the system.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.37 Resource adjust threshold


Full Name Resource adjust threshold

Abbreviation resourceAdjustThs

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

During PS services, the resource adjustment is judged in the following


two cases. :1, The Ranps instance will perform handshake with the
Mac instance, with a period of 5 s. The user plane judges the resource
adjustment when it receives handshake requirement from Ranps. 2,
When the downlink is established on the uplink TBF or the uplink is
established on the downlink TBF, judge the resource adjustment. The
packet resource adjustment threshold is used for the algorithm to judge
packet resources adjusted from a single timeslot to multi-timeslot.
The judgement principle is as follows:
When the uplink and downlink traffic is lower than the packet resource
adjustment threshold, the adjustment is not performed.
When the uplink traffic is greater than the downlink traffic adjust the
Description uplink preferentially.

2-1431

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When the uplink traffic is lower than the downlink traffic, and the downlink
traffic - the uplink traffic < packet resource adjustment threshold/4, adjust
the uplink preferentially.
In other cases, adjust the downlink preferentially.

Instance BSC

Value Range and Step 200..50000

Unit BYTE

Default Value 2000

Default Value
Configuration Reason Due to the practical application of the net

The larger the parameter value is, the more


difficult the sum of uplink and downlink traffic can reach this threshold,
and therefore the less likely the resource adjustment will be performed.
Even the sum of uplink and downlink traffic reaches the threshold,
Configuration Rule and
the difference between uplink and downlink traffic is more difficult
Adjustment Suggestion
to reach a quarter of the threshold, which more likely results in
resource adjustment based on uplink priority. This parameter can be
appropriately reset on field to adjust the initiation speed and direction
priority of resource adjustment.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces GB

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.38 GDpiAppSrv DN
Full Name GDpiAppSrv DN

2-1432

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation refGDpiAppSrvProfile

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the DPI application scenario to which the cell
belong, including the ordinary and business scenarios. It can also be
Description defined by the busy and idle periods.

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.39 Downlink TBF pre-establish support


Full Name Downlink TBF pre-establish support

Abbreviation EarlyDlTBFEstSupp

Managed Object GPRS Configuration

2-1433

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the cell supports the pre-establish-


Description ment of downlink TBF.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Not a basic function, disabled by default.

Configuration Rule and The feature is disabled generally, and enabled


Adjustment Suggestion in special cases such as to reduce the delay of the first packet.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.40 PS channel alloc reduction support


Full Name PS channel alloc reduction support

Abbreviation SuppReducePd

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

2-1434

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether the cell supports reducing the number
Description of PDTCHs in use based on the PDTCH load.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Not a basic function, disabled by default.

To increase the number of accessed mobile phones


Configuration Rule and
and reduce the error ratio of TBF establishment in case of high traffic
Adjustment Suggestion
load in a cell, enable the feature.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.41 Initial limit threshold of PDTCH alloc


Full Name Initial limit threshold of PDTCH alloc

Abbreviation LmtThreshold_0

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

2-1435

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is the initial limit on the number of PDTCHs. When the
channel load meets the condition:
Description initial limit<= channel load < medium limit, one channel can be reduced.

Instance Cell

Value Range and Step 65..74

Unit %

Default Value 70

Default Value Enable the initial limit on channel distribution


Configuration Reason when the traffic reaches a certain volume.

Configuration Rule and The larger the value, the higher the initial
Adjustment Suggestion limit is.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.42 Medium limit threshold of PDTCH alloc


Full Name Medium limit threshold of PDTCH alloc

Abbreviation LmtThreshold_1

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

2-1436

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is the medium limit on the number of PDTCHs. When


the channel load meets the condition:
medium limit<= channel load < maximum limit, two channels can be
Description reduced.

Instance Cell

Value Range and Step 75..84

Unit %

Default Value 80

Default Value Enable the medium limit on channel distribution


Configuration Reason when the traffic reaches a higher volume.

Configuration Rule and The larger the value, the higher the medium
Adjustment Suggestion limit is.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.43 Maximum limit threshold of PDTCH alloc


Full Name Maximum limit threshold of PDTCH alloc

Abbreviation LmtThreshold_2

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is the maximum limit on the number of PDTCHs. When


Description the channel load is greater this limit, four channels can be reduced.

2-1437

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

Value Range and Step 85..94

Unit %

Default Value 90

Default Value Enable the maximum limit on channel distribution


Configuration Reason when the traffic is very high.

Configuration Rule and The larger the value, the higher the maximum
Adjustment Suggestion limit is.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.44 Damping of PDTCH alloc from limit to non-limit


Full Name Damping of PDTCH alloc from limit to non-limit

Abbreviation LmtThreshold_3

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is used to avoid frequent changes between limited chan-


Description nel allocation and unlimited channel allocation.

Instance Cell

Value Range and Step 0..15

Unit %

2-1438

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 8

Default Value Reduce frequent changes between limited channel


Configuration Reason allocation and unlimited channel allocation.

The smaller the parameter value, the more probable


the traffic is subject to changes between limited channel allocation
Configuration Rule and
and unlimited allocation. The larger the value, the less probable
Adjustment Suggestion
the traffic is subject to such changes, but the sensibility to channel
load changes is reduced.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.33.45 GPRS phones init. Code can be changed


Full Name GPRS phones init. Code can be changed

Abbreviation initAttachExchGprs

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the coding mode used by the GPRS
MS in a cell can be dynamically changed.
0: the coding ,mode cannot be dynamically changed.
Description 1: the coding mode can be dynamically changed.

Instance Cell

1: Yes
Value Range and Step 0: No

2-1439

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 1

Default Value
Configuration Reason The adaptive coding scheme can improve the data throughput

The value is better set to Yes in accordance


Configuration Rule and
with the adaptive coding scheme of radio environment, so as to improve
Adjustment Suggestion
the packet transmission rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.46 Maximal resource for POC service


Full Name Maximal resource for POC service

Abbreviation POCSrcThs

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

2-1440

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Push to Talk over Cellular (PoC) is a push-to-talk service based on a


mobile network and Voice over Internet Protocol (VoIP).
The PoC service defines a half-duplex VoIP system for mobile devices
based on a packet-switched capacity of the radio data network.
The PoC service will affect the allocation policies of the packet-switched
channel as follows:
1. If there are PoC subscribers on the packet-switched channel, a new
common packet-switched service cannot be allocated to this channel
until all the PoC subscribers are released.
2. All PoC subscribers should be allocated to a channel on which PoC
subscribers have exist in a centralized manner until the channel is
congested.
This parameter indicates a percentage of the existing packets-switched
channels (static PDCH channel + dynamic PDCH channel unoccupied
Description by CS) occupied by the PoC service.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 50

Default Value PoC attribute function enabled or disabled. The function should be
Configuration Reason disabled.

Configuration Rule and


Adjustment Suggestion The function should be disabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1441

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.33.47 Gprs Initial access rate


Full Name Gprs Initial access rate

Abbreviation GprsIniAccRate

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates a bandwidth use for initial access and admission
Description when the GPRS channel is activated.

Instance Cell

Value Range and Step 1..22

Unit kb/s

Default Value 22

Default Value
Configuration Reason Set the parameter based on the bandwidth of MCS6 with normal rate.

Set this parameter based on the network's radio quality and bandwidth.
Configuration Rule and
A greater initial access and admission bandwidth indicates a higher
Adjustment Suggestion
initial access rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.48 Downlink Delay Signal TBF Time


Full Name Downlink Delay Signal TBF Time

2-1442

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation DlSigDelayTime

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter indicates downlink delay time of Temporary Block Flow


Description (TBF).

Instance Cell

Value Range and Step 0..4000

Unit ms

Default Value 2000

Default Value The downlink delay time of TBF is consistent with the setting of the
Configuration Reason previous parameter "downlink delay time".

Configuration Rule and The parameter should not be modified. If the value is modified, it will
Adjustment Suggestion affect QoS.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.49 Extended uplink Signal TBF time


Full Name Extended uplink Signal TBF time

Abbreviation ExtUlSigTBFTime

Managed Object GPRS Configuration

3GPP Name None

2-1443

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS44.060

Description This parameter indicates uplink extended time of TBF.

Instance Cell

Value Range and Step 0..3000

Unit ms

Default Value 1500

Default Value The uplink extended time of TBF is consistent with the setting of the
Configuration Reason previous parameter "uplink extended timer".

Configuration Rule and The parameter should not be modified. If the value is modified, it will
Adjustment Suggestion affect QoS.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.50 Support splitting uplink tcp ack datagram


Full Name Support splitting uplink tcp ack datagram

Abbreviation SuppTcpAckSplit

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter enables or disables an uplink TCP acknowdelgement


Description message to be split in TCP optimization.

Instance Cell

2-1444

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

Configuration Rule and


Adjustment Suggestion The function is enabled or disabled as required.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.51 Support copying uplink tcp ack datagram


Full Name Support copying uplink tcp ack datagram

Abbreviation SuppTcpAckCopy

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter enables or disables an uplink TCP acknowdelgement


Description message to be copied in TCP optimization.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

2-1445

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

Configuration Rule and


Adjustment Suggestion The function is enabled or disabled as required.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.52 Support discarding duplicate uplink tcp ack datagram


Full Name Support discarding duplicate uplink tcp ack datagram

Abbreviation SuppDupTcpAckDisc

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference 3GPP TS44.060

This parameter enables or disables an uplink TCP acknowledgment mes-


Description sage to be repeatedly discarded in TCP optimization.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Attribute function. The function is disabled by default.

2-1446

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and


Adjustment Suggestion The function is enabled or disabled as required.

Change Mode Offline

Related features ZGB-03-05-013 Delayed TBF Release in DL

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.53 TrxPSBusyThs
Full Name TrxPSBusyThs

Abbreviation TrxPSBusyThs

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

This parameter indicates the threshold of PS idleness on the carrier.


The PS idleness on the carrier is calculated as follows:
Suppose that the carrier has channels available for PS services in both
uplink and downlink, byUpNum represents the number of available
UL channels, and byDwNum represents the number of available DL
channels.
The total idleness of all available UL PS channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
This is the total of idleness of byUpNum UL channels.
The total idleness of all available DL PS channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
This is the total of idleness of byDwNum DL channels.
Description Among the formula above,

2-1447

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abis indicates the amount of Abis resources assigned on the channel (ip
Abis bandwidth or E1 Abis timeslot);
AbisMax indicates the maximum number of Abis resources allowed to
be assigned (ip Abis bandwidth or E1 Abis timeslot, e.g., at most 4 E1
Abis timeslots can be assigned on the PS channel of EDGE carrier);
Qos indicates the quota of Qos on the channel (the initial available
quota is 16);
Usermax indicates the maximum number of subscribers allowed for
multiplexing.
Usenum indicates the current number of subscribers on the channel.
The carrier idleness TrxIdle (value range: 0 to 100) is calculated as
follows:
If byUpNum == 0, byDwNum != 0,
Then TrxIdle = The total idleness of all available DL PS channels /
byDwNum
If byUpNum != 0, byDwNum == 0,
Then TrxIdle = The total idleness of all available UL PS channels /
byUpNum
If byUpNum != 0, byDwNum != 0,
Then TrxIdle = (The total idleness of all available DL PS channels
* byDwNum + The total idleness of all available UL PS channels *
byUpNum / (2 * byDwNum * byUpNum)
If byUpNum == 0, byDwNum == 0,
Then TrxIdle = 0 (Both UL and DL on the carrier have no idle channels,
so the idleness is 0)
The TRX selection principles when only PS idleness control is
considered are as follows:
1. If all TRX is relatively idle for PS services, a TRX is selected randomly.
This TRX is always preferred until its idleness is less than the specified
threshold. This principle is the concentrated assignment of PS services.
2. If the selected TRX idleness is less than the specified threshold, the
TRX is considered overloaded, and, to keep the balance among TRX,
another relatively idle TRX is selected until its PS service is overloaded.
3. If all TRX carriers are overloaded with PS services, a carrier with
more PS idleness is selected to meet the TRX balance principle for
PS services.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 80

2-1448

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When the default value is set to 50, PFC users occupy half channel Qos.
Default Value For non-PFC users, the number of current users on the channels is half
Configuration Reason the maximum number of users. In this way, the channel expansion is
controlled within a reasonable speed.

When there are sufficient PS channel resources


Configuration Rule and and high rates are required for PS services, you can set this parameter
Adjustment Suggestion to a lower value to expand the PS service channels to new carriers
as quickly as possible. Otherwise, set it to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.54 Cn
Full Name Cn

Abbreviation Cn

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

2-1449

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter sets the statistical value to increase the coding mode
level.
Unlike the unified coding mode of the circuit channel, the GPRS data
block may employ the CS-1 to CS-4 coding modes, whose data rates
are 9.05 kbps, 13.4 kbps, 15.6 kbps, and 21.4 kbps respectively. The
low level coding mode has a higher error correction capability and
lower data throughput. Different coding modes can be chosen for each
timeslot or even each TBF.
The network selects the coding mode dynamically according to the data
rate requirement and radio transmission quality at the transmission
of GPRS data, to reach the largest radio throughput. Good radio
transmission quality means that the probability of the retransmission of
the error radio blocks is small. In this case, the coding mode that carries
large data volume (that is, high level coding mode) can be used.
The coding mode for TBF (uplink and downlink) in the channel coding
mode CSn (1=<n=<3) increases to one level up, if the number of data
blocks transmitted consecutively and correctly exceed the predefined
parameter Cn[n-1].
The footnotes 1, 2, and 3 on the interface are coding conversion
parameters between CS1 and CS2, between CS2 and CS3, and
Description between CS3 and CS4 respectively.

Instance BSC

Value Range and Step 0..255

Unit N/A

Default Value [85,85,85]

Default Value A 15% to 25% BLER is acceptable as per the system simulation. A
Configuration Reason BLER lower than 15% has a positive influence on the rate.

A greater value increases the difficulty of upgrading the coding mode to


ensure that the adjustment is necessary and appropriate. This avoids
rate deterioration and reduces the GPRS TBF call drop rate.
Configuration Rule and A smaller value decreases the difficulty of upgrading the coding mode.
Adjustment Suggestion It is recommended to use a comparatively great value so that the
coding mode is upgraded only when the BLER is very low. This helps
improve the performance indexes related to GPRS (not EDGE) service
throughput .

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

2-1450

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2.33.55 Nn
Full Name Nn

Abbreviation Nn

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

This parameter sets the statistical value to decrease the coding mode
level.
Unlike the unified coding mode of the circuit channel, the GPRS data
block may employ the CS-1 to CS-4 coding modes, whose data rates
are 9.05 kbps, 13.4 kbps, 15.6 kbps, and 21.4 kbps respectively. The
low level coding mode has a higher error correction capability and
lower data throughput. Different coding modes can be chosen for each
timeslot or even each TBF.
The network selects the coding mode dynamically according to the data
rate requirement and radio transmission quality at the transmission
of GPRS data, to reach the largest radio throughput. When the
radio transmission quality is bad, the coding mode with a stronger
anti-interference capability (that is, low level coding mode) shall be
used. The coding level decreases by one level if Nn[n-2] data blocks
are transmitted and the number of consecutive data blocks losses in
the coding mode CSn (2=<n=<4) for the TBF (downlink and uplink) is
Xn[n-2]%.
The footnotes 1, 2, and 3 on the interface are coding conversion
parameters between CS1 and CS2, between CS2 and CS3, and
Description between CS3 and CS4 respectively.

Instance BSC

Value Range and Step 0..255

2-1451

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value [20,20,20]

Default Value The value 20 is appropriate to ensure sensitivity and correctness of


Configuration Reason rate adjustment.

A greater value indicates that the system adjusts the coding mode with a
more consideration of the number of the transmitted data blocks.
Configuration Rule and A smaller value helps the system adjust the coding mode to suit the
Adjustment Suggestion radio environment change in a timely manner.
An appropriate setting can improve the performance indexes related to
GPRS (not EDGE) service throughput.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.56 Xn
Full Name Xn

Abbreviation Xn

Managed Object GPRS Configuration

3GPP Name None

3GPP Reference N/A

2-1452

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter sets the threshold for determining a decrease in the level
of the coding mode. It is used at the RLC/MAC layer of BRP.
Unlike the unified coding mode of the circuit channel, the GPRS data
block may employ the CS-1 to CS-4 coding modes, whose data rates
are 9.05 kbps, 13.4 kbps, 15.6 kbps, and 21.4 kbps respectively. The
low level coding mode has a higher error correction capability and
lower data throughput. Different coding modes can be chosen for each
timeslot or even each TBF.
The network selects the coding mode dynamically according to the data
rate requirement and radio transmission quality at the transmission
of GPRS data, to reach the largest radio throughput. When the
radio transmission quality is bad, the coding mode with a stronger
anti-interference capability (that is, low level coding mode) shall be
used. The coding level decreases by one level if Nn[n-2] data blocks
are transmitted and the number of consecutive data blocks losses in
the coding mode CSn (2=<n=<4) for the TBF (downlink and uplink) is
Xn[n-2]%.
The footnotes 1, 2, and 3 on the interface are coding conversion
parameters between CS1 and CS2, between CS2 and CS3, and
Description between CS3 and CS4 respectively.

Instance BSC

Value Range and Step 0..100

Unit N/A

Default Value [25,25,25]

Default Value A 15% to 25% retransmission rate is acceptable in normal radio


Configuration Reason environment.

A greater value indicates that the coding mode is more difficult to be


downgraded.
It is recommended to use a comparatively low value so that the coding
Configuration Rule and
mode can be downgraded once the BLER becomes great. This
Adjustment Suggestion
avoids rate deterioration due to untimely code mode adjustment and
improves the performance indexes related to GPRS (not EDGE) service
throughput.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1453

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.57 One phase access initial code seletion


Full Name One phase access initial code seletion

Abbreviation OnePhaAccIniCodSet

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

Description One-phase access initial code selection by configuration or by signal level

Instance Cell

Value Range and Step 0:by configuration 1:by signal level

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

To increase the initial service rate by selecting a code scheme and rate
Configuration Rule and
according to the level measured over network, set this parameter to "by
Adjustment Suggestion
signal level".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

2-1454

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.58 Initial GPRS code schem at one phase access


Full Name Initial GPRS code schem at one phase access

Abbreviation OnePhaAccIniGCodSch

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

When the value of "OnePhaAccIniCodSet" (one-phase access initial code


Description selection) is 0, this parameter determines the GPRS initial code scheme.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 1

Default Value
Configuration Reason Keep it the same as that in the previous version.

This parameter affects the initial access code scheme of all MSs in
Configuration Rule and
the cell. Increase the value of this parameter while ensuring the link
Adjustment Suggestion
establishment success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

2-1455

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

Downlink RLC Window Size value


2.33.59 Indicate Uplink and
Full Name Indicate Uplink andDownlink RLC Window Size value

Abbreviation RLCMaxWinInd

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the window size value of uplink EGPRS RLC data
that the system notifies the MS to send, and the window size values when
the system sends downlink EGPRS RLC data and receive uplink EGPRS
Description RLC data.

Instance Cell

Value Range and Step 0:average 1:Maximum

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and This parameter can be set to 1, so as to improve the throughout at the
Adjustment Suggestion RLC layer.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1456

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.33.60 DTM MultiSlot Class 11 extended dynamic assign


Full Name DTM MultiSlot Class 11 extended dynamic assign

Abbreviation DTM11EDASup

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

Description DTM multislot 11 MSs support the extended dynamic assignment switch.

Instance Cell

Value Range and Step 0: Not Support 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.61 Two phase access initial code seletion


Full Name Two phase access initial code seletion

Abbreviation TwoPhaAccIniCodSet

Managed Object GPRS Configuration

2-1457

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Two-phase access initial code selection by configuration or by signal level

Instance Cell

Value Range and Step 0:by configuration 1:by signal level

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

To increase the initial service rate by selecting a code scheme and rate
Configuration Rule and
according to the level measured over network, set this parameter to "by
Adjustment Suggestion
signal level".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.62 Support downlink five timeslots


Full Name support downlink five timeslots

Abbreviation SuppDlFiveTs

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

2-1458

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether a cell allocates five timeslots for MSs
Description in the downlink direction.

Instance Cell

Value Range and Step 0: Not Support 1: Support

Unit N/A

Default Value 1

By default, the original version supports the function of allocating downlink


Default Value
five timeslots for MSs. The switch is on by default, which is the same as
Configuration Reason
that in the original version.

Configuration Rule and


Adjustment Suggestion Not validated temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.33.63 Sending PSI13 or not


Full Name Sending PSI13 or not

Abbreviation PSI13SendInd

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the system sends PSI13 messages over
Description the PACCH channel.

Instance Cell

2-1459

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0:not send 1:send

Unit N/A

Default Value 1

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Not available temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

Cell Data message sending times


2.33.64 Packet Neighbour
indication
Full Name Packet NeighbourCell Data message sending times indication

Abbreviation PNCDSendInd

Managed Object GPRS Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of times that the system sends the
"packet neighbour cell information" messages to the MS during cell rese-
Description lection over network. If the value is 1, the message format is 11223344.

Instance Cell

Value Range and Step 0:once 1:twice

2-1460

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and This parameter can be set to 1, so as to improve the probability of MSs in
Adjustment Suggestion receiving "packet neighbour cell information" messages.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34 PS Channel Schedule


Configuration(GPsChannelSchedule)
2.34.1 PS Channel Schedule Configuration ID
Full Name PS Channel Schedule Configuration ID

Abbreviation GPsChannelSchedule

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

Description PS Channel Schedule Configuration ID

Instance None

Value Range and Step N/A

2-1461

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.2 Minimal number of idle CS channel


Full Name Minimal number of idle CS channel

Abbreviation csChansThs

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

Idle CS channels (including the idle and dynamic TCH channel, and the
static TCH channel) are reserved in the cell for reducing CS call failure
rate.After the CS channel has been applied for successfully, if the number
of idle CS channels in the current cell is smaller than the threshold, try to
perform such operations as starting intelligent powerup or releasing the
PS channel forcibly, so as to ensure the number of idle CS channels is
Description greater than the threshold.

Instance Cell

2-1462

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..255

Unit N/A

Default Value 2

The default value is used to reduce CS call


Default Value
failure rate, and ensure that each time idle channels are available
Configuration Reason
for CS request to access successfully.

Configuration Rule and


Adjustment Suggestion The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.3 PS preempt CS support


Full Name PS preempt CS support

Abbreviation psPrmpCsSupport

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

This parameter indicates when the dynamic channel with preferred PDCH
Description is occupied, to determine if the channel can be preempted by PS service.

Instance Cell

0: Not Support
Value Range and Step 1: Support

2-1463

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value This is a functional switch which supports


Configuration Reason PS in preempting CS and is disabled by default.

Configuration Rule and If radio resources are limited, this switch


Adjustment Suggestion can be enabled to ensure the number of necessary PS channels.

Change Mode Offline

Related features N/A

Related Parameters PDCHPrecedence

PSservice can only the channel configured with


Relationship the PDCHPrecedence attribute, so this parameter is valid only when
the channel is configured with this attribute.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.4 CS subscriber moving support


Full Name CS subscriber moving support

Abbreviation AllowCsMove

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

2-1464

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter describes whether to support moving in the CS-service


cell on a dynamic channel when resources are idle and the CS chan-
nel is released, to make the continuity of available PS timeslot group
maximized. The following determins whether resources are idle: All
idle CS-service channels (including static and dynamic TCHs) in the
cell/ number of available service channels in the cell <= alarm threshold
Description (ResLimit[3] )for cell channel resources.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is disabled by default.

This function can be enabled when radio resources


Configuration Rule and
are comparatively sufficient, so as to ensure the maximum continuity
Adjustment Suggestion
of the PS channel and the rate of PS service.

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.5 EDGE initial downlink allocation by multislot class1


Full Name EDGE initial downlink allocation by multislot class1

Abbreviation edgeInitDlClass

2-1465

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the initial downlink timeslot is allocated


in consistent with MS multi-slot class 1 or not.
YES: Initial timeslot allocation is in consistent with MS multi-slot class 1.
Description NO: Initial timeslot allocation is in consistent with MS real multi-slot class.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason ensure the burst and small package servie throughput

If the PDCHs and Abis resources are enough,


Configuration Rule and
set the value as No; if the PDCHs and Abis resources are not enough,
Adjustment Suggestion
set the value as Yes.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.6 GPRS initial downlink allocation by multislot class1


Full Name GPRS initial downlink allocation by multislot class1

2-1466

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation gprsInitDlClass

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

This parameter is to indicate whether the initial channel allocation on the


downlink is based on multislot capability 1 (i.e. uplink 1 downlink 1) or
based on the MS' actual multislot capability specified in downlink assign-
ment. It is recommended to allocate in accordance with the multislot ca-
pability 1 when the channels or ABIS transmission resources are inade-
Description quate, to prevent rapid expansion of channels.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value The value is 1 by default, to prevent rapid


Configuration Reason expansion of channels.

Configuration Rule and If radio resources and ABIS resources are adequate,
Adjustment Suggestion this value can be set as "No" to reduce the times of resource adjustment.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1467

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.34.7 PS channel expand support


Full Name PS channel expand support

Abbreviation psChlExpandSupport

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether PS channel expansion is supported.


For example, if the number of channels that MS uses currently is 2+1
and MS can use more timeslots, then the channel mode is automatically
expanded to 3+1 or 4+1 after adjacent CS channel is released.
When the PS channel expansion is enabled to be supported, and the
ratio of idle TCH channels in the cell is greater than the idle TCH channel
threshold when the PS channel is expanded, PS channel expansion is
performed. After this function is enabled, The PS service of some radio
channels preempted can be resumed to use more radio channels, to
Description improve the radio channel utilization and PS service throughput.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If there are many cases that the CS services grab the PS service
Configuration Rule and
channels, this function can be enabled.
Adjustment Suggestion
This function can resume more radio channels for PS services.

Change Mode Offline

Related features ZGO-03-02-012 PS Channel Extension

Related Parameters N/A

Set the switch of channel extension to "Yes", and the TCH channel
Relationship
threshold will be effective during PS channel extension.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1468

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.8 Threshold of idle tch for PS channel expand


Full Name Threshold of idle tch for PS channel expand

Abbreviation tchIdleThsForPSExp

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

When the ratio of idle TCHs of the cell is greater than this threshold, PS
channel expansion will be performed.
The ratio ofdile TCH channels in the cell is calculated as follows: (
number of idle TCH/F channels in the cell + number of TCH/H channels (
2 TCH/H channels are regarded as 1 TCH/F channel))/ available service
Description channels in the cell.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

Default Value
Configuration Reason Low threshold is good for PS channel extension.

Low threshold is good for the start of PS channel


Configuration Rule and extension that starts when there are more CS services. High threshold
Adjustment Suggestion will delay the start PS channel extension that starts when there are
less CS services.

Change Mode Offline

Related features ZGO-03-02-012 PS Channel Extension

Related Parameters psChlExpandSupport

Set the switch of channel extension to "Yes",


Relationship and the TCH channel threshold will be effective during PS channel
extension.

2-1469

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.9 PS busy threshold


Full Name PS busy threshold

Abbreviation psBusyThs

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

If the cell busyness is greater than this threshold, a maximum of one


dynamic TCHF channel of new PS services is allowed to be converted
into PD.Cell busyness is calculated in accordance with the formula: the
numerator: "TCHF channels occupied + TCHH channel occupied" / "2
+ non-blocked static PD channel + busy dynamic PD channel", the de-
nominator: "all available TCH/H/2" + "available dynamic and static PDCH
Description channels in current status").

Instance Cell

Value Range and Step 1..100

Unit %

Default Value 80

If over 80% of the channels are occupied, the


Default Value
cell has large traffic. In this case, it is recommended not to expand
Configuration Reason
PS channels.

Configuration Rule and The smaller the value is, the more the expansion
Adjustment Suggestion of PS services in the cell is limited.

Change Mode Offline

Related features N/A

2-1470

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.10 Maximum PS uplink user per ts


Full Name Maximum PS uplink user per ts

Abbreviation MaxPsUserPerTsUl

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

This parameter describes maximum PS uplink user per ts.


If on site the packet traffic is large, hardware load is high, and capacity
expansion is impossible temporally, the user can modify this parameter
to reduce the number of downlink packet users supported by the
channel. In this way, the packet traffic volume is actually reduced, which
helps reduce hardware load.
If this value is decreased, the KPI indexes of the packet service, such as
Description downlink TBF link success rate, are reduced indirectly.

Instance Cell

Value Range and Step 1..7

Unit N/A

Default Value 7

Default Value The default value 4 ensures to balance the


Configuration Reason channel congestion rate and resource utilization rate.

2-1471

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the value is small, it causes radio resources congestion when the data
traffic is busy, thereby the uplink TBF establishment success rate is
Configuration Rule and influenced.
Adjustment Suggestion If the value is large, PDTCH supported by users is not limited manually,
but users' feeling may be influenced because the PDTCH is multiplexed
too much.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.11 Max PS downlink user per TS


Full Name Max PS downlink user per TS

Abbreviation MaxPsUserPerTsDl

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

This parameter describes the maximum PS downlink users allowed


by a single timeslot.
The PS with a single timeslot supports a maximum of 16 users at
downlink. The traffic is medium. The default value is 6. Adjust the
value according to the traffic volume. If this value is decreased, the KPI
indexes of the packet service, such as downlink TBF link success rate,
are reduced indirectly. If the downlink TBF link setup success rate of
packet service is low and the packet channel resources are sufficient as
Description required by the user, a high value is recommended.

2-1472

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 1..16

Unit N/A

Default Value 16

Default Value The default value 6 ensures to balance the


Configuration Reason channel congestion rate and resource utilization rate.

If the value is small, it causes radio resources congestion when the data
traffic is busy, thereby the uplink TBF establishment success rate is
Configuration Rule and influenced.
Adjustment Suggestion If the value is large, PDTCH supported by users is not limited manually,
but users' feeling may be influenced because the PDTCH is multiplexed
too much.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.12 Multislot allocation of extended range cell support


Full Name Multislot allocation of extended range cell support

Abbreviation MultiTsOfExtendCell

Managed Object PS Channel Schedule Configuration

3GPP Name None

3GPP Reference N/A

2-1473

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates whether an extended cell supports multi-timeslot


allocation. The extended cell can allocate 1 to 3 channels in accordance
Description with MS' multi-timeslot capability.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is not enabled at the suggestion.

Configuration Rule and This is a special functional switch, which


Adjustment Suggestion is not enabled at the suggestion.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->PS Channel Schedule
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.13 Support CS preempt PS optimization


Full Name Support CS preempt PS optimization

Abbreviation CSPreemptPSOpti

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

When the switch is on and CS-PS preemption exists, call drop does not
Description occur in PS services in case of not RRBP or TA timeslots.

2-1474

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 0: Not Support 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason New function. By default, it is disabled.

In the case of preemption from CS to PS, determine the usage of dynamic


Configuration Rule and PS channels. After this function is enabled, non-RRBP and non-TA
Adjustment Suggestion timeslots are preempted with priority. Determine whether to enable this
function as required on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Channel Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.14 Initial piority direction of multislot capability


Full Name Initial piority direction of multislot capability

Abbreviation InitMultiSlotPriDir

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

Uplink priority, downlink priority or uplink extended dynamic priority of initial


Description assignment

Instance Cell

Value Range and Step 0:uplink priority 1:downlink priority 2:uplink extended dynamic priority

2-1475

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 1

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and It is not recommended to adjust this value in existing networks. The uplink
Adjustment Suggestion priority is only used for test purpose.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Channel Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.34.15 Support the discontinuous PDTCH allocation


Full Name Support the discontinuous PDTCH allocation

Abbreviation DisContinuAllocSup

Managed Object PS Channel Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

Discontinuous PDTCH allocation, helping allocate PS users with more


Description PDTCH channels

Instance Cell

Value Range and Step 0: Not Support 1: Support

Unit N/A

Default Value 0

2-1476

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason New function. By default, it is disabled.

Discontinuous PDTCH allocation is supported. In the case of dynamic


channel allocation, discontinuous PDTCH allocation may occur due to the
preemption from CS to PS. For timeslots 3, 4 and 6, only two channels
Configuration Rule and are allocated for PS services if discontinuous channel allocation is not
Adjustment Suggestion supported. Otherwise, three channels can be allocated. When more
channels are allocated for PS services, the probability of preemption from
CS to PS increases. Therefore, determine whether to enable this function
as required on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Channel Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.35 GPRS-EDGE Schedule


Configuration(GGprsEdgeSchedule)
2.35.1 GPRS-EDGE Schedule Configuration ID
Full Name GPRS-EDGE Schedule Configuration ID

Abbreviation GGprsEdgeSchedule

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

Description GPRS-EDGE Schedule Configuration ID

2-1477

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.35.2 Subscriber occupying other preference channel support


Full Name Subscriber occupying other preference channel support

Abbreviation HybridOccuSupp

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name None

3GPP Reference N/A

GPRS and EGPRS are available to properties of PreferPsService of the


static PD channel and dynamic channnels. This parameter describes
whether to support GPRS subscriber occupying the EGPRS preference
channel, and whether EDGE subscribers can occupy the GPRS prefer-
Description ence channel.

2-1478

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value GPRS users can occupy EDGE preference channel by default.
Configuration Reason EDGE users can occupy GPRS preference channel by default.

The value is set as "No", to ensure the access


rate of EDGE users and to prevent the GPRS users from interfering
Configuration Rule and the rate of EDGE users. If the radio resources are limited, to a certain
Adjustment Suggestion extent, the rate is allowed to be decreased, and set the value as
"Yes" to allow the EGPRS users, together with the EDGE users, occupy
the preference channel.

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters PreferPsService

This parameter is valid only when the attribute


Relationship PreferPsService of the channel is configured as GPRS preferred or
EDGE preferred.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.35.3 PS subscriber moving out of other preference channel


support
Full Name PS subscriber moving out of other preference channel support

Abbreviation AllowPsMove

Managed Object GPRS-EDGE Schedule Configuration

2-1479

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name None

3GPP Reference N/A

This parameter describes whether to support the subscriber moving out


of other preference channel. That is to say, if a GPRS subscriber oc-
cupies the EDGE preference channel and there is GPRS subscriber re-
leased on iother channel, the system will try to move GPRS subscribers
out of the EDGE preference channel. If the EDGE subscriber occupies
the GPRS preference channel and there is EDGE subscriber released on
other channel, the system will try to move EDGE subscribers out of the
Description GPRS preference channel.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is not enabled at the suggestion.

Configuration Rule and This is a special functional switch, which


Adjustment Suggestion is not enabled at the suggestion.

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1480

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving


Full Name Threshold of GPRS/GPRS,EDGE/EDGE service moving

Abbreviation sfPreferBusyThs

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name None

3GPP Reference N/A

During this PS application, on the gained preferential channel on this


side, it is better that existing QoS quota / total available QoS quota
is lower than allocated result for this percentage, to calculate target
evaluation target function in combination with un-congeneric occupying
threshold.
If the AllowPsMove switch is enabled, and one GPRS subscriber on the
GPRS preferential channel is released, the system will try to initiate
the moving of GPRS subscribers on the EDGE preferential channel. If
the number of GPRS subscribers occupying on the EDGE preferential
channel exceeds OpPreferBusyThs (un-congeneric occupying
threshold)., and SfPreferBusyThs (congeneric occupying threshold) is
lower than the threshold after moving, the system will initiate PS moving.
If EDGE subscribers occupy the GPRS preferntial channel, after EDGE
subscribers on other channel are released, the system will try to move
Description EDGE subscribers out of the GPRS oreferential channel.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 100

Default Value It is recommended not to adjust the default


Configuration Reason value but set it as 100 (that is, this parameter is invalid).

It is recommended not to adjust the value but set it as 100 (that is, this
parameter is invalid).
This parameter is valid until the GPRS preference channel and EDGE
preference channel are set.
When the idle channels are unavailable, the GPRS users can be
allocated to the non-congeneric preference channel, to prevent the
Configuration Rule and
GPRS users and EDGE users from multiplexing channels, which
Adjustment Suggestion
influences the user rate.
If the value is 100%, it prevents the GPRS users and EDGE users from
multiplexing channels, thereby relative index of EDGE user throughput
can be improved.
It is recommended to adjust the value as 80 if the proportion of the
GPRS users to the EDGE users in the cell fluctuates greatly.

2-1481

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

You can adjust the value if the GPRS and EDGE preference channels
are inadequate.

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters AllowPsMove


OpPreferBusyThs

This parameter, which should be used with the


Relationship parameter SfPreferBusyThs, is valid until the AllowPsMove switch is
enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.35.5 Threshold of GPRS/EDGE service moving


Full Name Threshold of GPRS/EDGE service moving

Abbreviation opPreferBusyThs

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name None

3GPP Reference N/A

During this PS application, on the gained preferential channel on the


opposiste side, it is better that existing QoS quota / total available QoS
quota is lower than allocated result for this percentage, to calculate target
evaluation target function in combination with congeneric occupying
threshold.
If the AllowPsMove switch is enabled, and one GPRS subscriber on the
GPRS preferential channel is released, the system will try to initiate
the moving of GPRS subscribers on the EDGE preferential channel. If
the number of GPRS subscribers occupying on the EDGE preferential

Description channel exceeds OpPreferBusyThs (un-congeneric occupying

2-1482

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

threshold)., and SfPreferBusyThs (congeneric occupying threshold) is


lower than the threshold after moving, the system will initiate PS moving.
If EDGE subscribers occupy the GPRS preferntial channel, after EDGE
subscribers on other channel are released, the system will try to move
EDGE subscribers out of the GPRS oreferential channel.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 0

Default Value It is recommended not to adjust the default


Configuration Reason value but set it as 0 (that is, this parameter is invalid).

Configuration Rule and It is recommended not to adjust the value but


Adjustment Suggestion set it as 0 (that is, this parameter is invalid).

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters AllowPsMove


PDCHPrecedence
SfPreferBusyThs

This parameter, which should be used with the


Relationship parameter SfPreferBusyThs, is valid until the AllowPsMove switch is
enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell


Full Name Use parameter of 'EGPRS Prior to GPRS' in Cell

Abbreviation UseCellEGPRSPriPara

2-1483

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to use the parameter of 'EGPRS


Prior to GPRS' in the cell. When the EGPRS prior to GPRS function is
enabled and this parameter is set to Yes, the cell-level allocating weights
of EGPRS parameter is used.
The number of blocks allocated to EGPRS and GPRS are adjusted
Description according to a certain ratio.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason decide by fact on demand

If it is necessary to set customized parameters


Configuration Rule and for the cell, set this parameter to 1; if the BSC-level parameters
Adjustment Suggestion are used rather than the customized parameters, set this parameter
to 0.

Change Mode Offline

Related features N/A

Related Parameters N/A

This parameter is valid until the Info_4_6


parameter is enabled; The Info1_7_6 parameter is valid until the
Relationship
Info_4_6
parameter and this parameter are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1484

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.35.7 Allocating weights of EGPRS


Full Name Allocating weights of EGPRS

Abbreviation EGPRSAllocW

Managed Object GPRS-EDGE Schedule Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the allocating weight of EGPRS for cell. When
the EGPRS prior to GPRS function is enabled and the cell uses the
EGPRS prior to GPRS parameter, the cell-level allocating weight of
EGPRS parameter is used. The number of blocks allocated to EGPRS
and GPRS are adjusted according to a certain ratio.
If the value is 0, the cell EGPRS service fails to get blocks. If the value is
Description 100, the cell GPRS service fails to get blocks.

Instance Cell

Value Range and Step 0..100

Unit N/A

Default Value 70

Default Value
Configuration Reason consider speed of EDGE and GPRS in Cell

If it is necessary to set the customized parameters


for the cell, enable the setting of cell-level customized parameters.When
EDGE and GPRS share the same channel, this parameter value is larger,
Configuration Rule and the EDGE user gets more radio blocks and the EDGE service rate is
Adjustment Suggestion higher. The smaller this parameter value is, the less radio blocks
the EDGE user gets, and the lower the EDGE service rate is. This
parameter
acts on the dynamic and static data service channels.

Change Mode Offline

Related features N/A

Related Parameters UseCellEGPRSPriPara

This parameter takes effect until the parameters


Relationship
Info_4_6 and Info1_7_5 are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1485

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell


OMC Access Path Information Configuration->GPRS Configuration->EDGE
Configuration->GPRS-EDGE Schedule Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.36 NACC Configuration(GNACC)


2.36.1 NACC Configuration ID
Full Name NACC Configuration ID

Abbreviation GNACC

Managed Object NACC Configuration

3GPP Name N/A

3GPP Reference N/A

Description NACC Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1486

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NACC Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.36.2 CCN mode support


Full Name CCN mode support

Abbreviation ccnActive

Managed Object NACC Configuration

3GPP Name CCN_ACTIVE

3GPP Reference 3GPP TS 44.060

Through the CCN_ACTIVE parameter carried in GPRS Cell Options IE


of SI13 on BCCH, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM adjacent cell. The
CCN mode refers to that the reselection requirement is notified to the
network side through the PACKET CELL CHANGE NOTIFICATION
message when the MS determines to perform cell reselection.
When the CCN_ACTIVE parameter is not carried in the GPRS Cell
Options IE or it is disabled, the MS will not enter the CCN mode. When
the CCN_ACTIVE parameter of the local cell is enabled, and the MS
determines to perform reselecteion to other GSM adjacent cell, user
should also check whether the CCN_SUPPORTED parameter of the
adjacent cell exists. If it does not exist, the MS is supposed to enable the
CCN mode towards all adjacent cells. If it exists, set the CCN mode as
disabled, then the MS cannot enter the mode. If the CCN_SUPPORTED
parameter exists, set the CCN mode as enabled, then the MS can
enter the mode.
Through the PACKET MEASUREMENT ORDER message the
network side can indicate the MS whether to enable the CCN_ACTIVE
parameter in the serving cell. It, through the PACKET CELLl CHANGE
ORDER or PS HANDOVER COMMAND message to indicate the MS
whether to enable the CCN_ACTIVE parameter in the target cell. The
setting of the CCN_ACTIVE parameter of the message on the PACCH
channel takes priority over that of the CCN_ACTIVE parameter in the
broadcast system message. The MS only uses the CCN mode under
Description the NC0 and NC1 modes.

Instance Cell

2-1487

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value Enabling of the function helps reduce the interval of cell reselection, and
Configuration Reason reduce the impact on PS implemented.

If the function is enabled, it helps reduce


Configuration Rule and
the interval of cell reselection and brings less impact on the current
Adjustment Suggestion
packet services. Therefore, it is recommended to enable the function.

Change Mode Offline

Related features ZGO-02-02-010 Network-assisted Cell Change

Related Parameters NACCSupport


CCNActive
SIStatusInd

NACC should be enabled simultaneously with CCNActive/SISta-


Relationship
tusInd/CCNSupport.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NACC Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail Update

2.36.3 Cell support system message status flow


Full Name Cell support system message status flow

Abbreviation siStatusInd

Managed Object NACC Configuration

3GPP Name SI_STATUS_IND

3GPP Reference 3GPP TS 44.060

2-1488

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether the cell supports the system message
status flow. It is broadcast to the MS through SI13 and PSI13, describing
whether the network supports Packet SI Status flow. Through sending the
Packet SI Status message on PACCH, the MS notifies the current recev-
ing status of the SI message saved to the network side. Upon receiving
the Packet SI Status message, the network side sends the SI message
required by the MS through the Packet Serving Cell Data message in ac-
cordance with the SI receiving indication carried in the message. In the
process of network supporting cell reselection, when the MS in the old
cell receives the desired system message of the new cell and gains an
access to the new cell, if the new cell supports the Packet SI Status flow,
the MS obtains the system message of the new cell in accordance with
Description the above procedures.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value Enabling of the function helps restore services immediately after
Configuration Reason reselection to a new cell.

If the function is enabled, it helps restore


Configuration Rule and
services as soon as possible after the MS reselects to a new cell.
Adjustment Suggestion
Therefore, it is recommended to enable the function.

Change Mode Offline

Related features ZGO-02-02-010 Network-assisted Cell Change

Related Parameters NACCSupport


CCNSupport
CCNActive

NACC should be enabled simultaneously with CCNActive/SISta-


Relationship
tusInd/CCNSupport.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NACC Configuration

Parameter Modifying
Version UR11.2 A

2-1489

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail Update

2.36.4 3G NACC support


Full Name 3G NACC support

Abbreviation support3GCCN

Managed Object NACC Configuration

3GPP Name 3G_CCN_ACTIVE

3GPP Reference 3GPP TS 44.060

The network uses the parameter 3G_CCN_ACTIVE on the BCCH


(SI2quater) to indicate the cell whether CCN is enabled for cell reselection
towards 3G cells.If 3G_CCN_ACTIVE is not provided or it indicates that
CCN is disabled in the cell, the mobile stations shall not follow the CCN
procedures towards 3G cells. 3G_CCN_ACTIVE can also be individually
sent to the mobile station in either a PACKET MEASUREMENT ORDER
or a PACKET CELL CHANGE ORDER message. In the latter case, the
Description setting applies in the target cell.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Enabling of the functiion is subject to the actual condition during 2/3G


Default Value
operations. The function is applied when the MS needs to be reselected
Configuration Reason
to a 3G cell and enter CCN mode.

This function can be enabled according to the


Configuration Rule and
inter-operation of 2/3G. If you prefer the MS to perform reselection
Adjustment Suggestion
towards 3G cells when it enters CCN mode, use this function.

Change Mode Offline

Related features ZGO-02-02-011 Inter-BSC NACC

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1490

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NACC Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail Update

2.37 NC2 Configuration(GCellPsNc2)


2.37.1 NC2 Configuration ID
Full Name NC2 Configuration ID

Abbreviation GCellPsNc2

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description NC2 Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

2-1491

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.2 Cell reselection offset in idle


Full Name Cell reselection offset in idle

Abbreviation reselOff1

Managed Object NC2 Configuration

3GPP Name GPRS_RESELECT_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is broadcast to MS via system


message by BTS. In the GPRS system, C32 is used as the standard
for cell reselection. Similar to the C2 standard in GSM, there is a
cell reselection offset parameter (ReselOff) for calculation of the C32
standard. When the offset represented by this parameter is 0dB, it need
not be indicated in the packet system message.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1492

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.3 Cell reselection temporary offset in idle


Full Name Cell reselection temporary offset in idle

Abbreviation tempOffset1

Managed Object NC2 Configuration

3GPP Name GPRS_TEMPORARY_OFFSET

3GPP Reference 3GPP TS 45.008

This parameter used at the MS side. It is broadcast to the MS via system


message by BTS. In the GPRS system, C32 is used as the standard for
cell reselection. Similar to the C2 standard in GSM, there is a temporary
offset parameter TempOffset for calculation of the C32 standard and it
provides the C32 standard with a negative offset.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1493

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.4 Penalty time of cell reselection in idle


Full Name Penalty time of cell reselection in idle

Abbreviation penalTime1

Managed Object NC2 Configuration

3GPP Name GPRS_PENALTY_TIME

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is broadcast to the MS via


system message by BTS. In the GPRS system, C32 is used as the
standard for cell reselection. There is a temporary offset in C32 that
provides a negative offset, similar to C2 in GSM system. The effective
time depends on the PENAL TIME parameter of cell reselection.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1494

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.5 Interval of reselecting the same cell in idle


Full Name Interval of reselecting the same cell in idle

Abbreviation t_Resel1

Managed Object NC2 Configuration

3GPP Name T_RESEL

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is broadcast to the MS via


system message by BTS. When the MS performs a cell reselection
that causes abnormal release of this cell, it is not allowed to reselect
this cell again within the T_RESEL period, unless there is no other
cells for selection. When the time represented by this parameter is the
default value (5s), it does not need to be broadcast to the MS in the
PSI3 message.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1495

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.6 Threshold of HSC signal level in idle


Full Name Threshold of HSC signal level in idle

Abbreviation hcs_Thr1

Managed Object NC2 Configuration

3GPP Name HCS_THR

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to HCS parameter,


which is broadcast to the MS via system message by BTS, to indicate
the HCS signal strength threshold of the cell.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

2-1496

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.7 HCS Priority in idle


Full Name HCS Priority in idle

Abbreviation prioClass1

Managed Object NC2 Configuration

3GPP Name PRIORITY_CLASS

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to HCS parameter,


which is broadcast to the MS via system message by BTS, to specify
the HCS priority of the cell.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1497

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.8 C31 hysteresis in idle


Full Name C31 hysteresis in idle

Abbreviation c31_Hyst1

Managed Object NC2 Configuration

3GPP Name C31_HYST

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is broadcast to the MS


through system message by BTS, to indicate if CellReselHys parameter
functions on C31 standard.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1498

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.9 GPRS cell reselection hysteresis in idle


Full Name GPRS cell reselection hysteresis in idle

Abbreviation reselHys1

Managed Object NC2 Configuration

3GPP Name GPRS_CELL_RESELECT_HYSTERESIS

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is broadcast to the MS via


system message by BTS.
When the MS performs GPRS cell reselection, if the source cell and
the target cell belong to different location areas, the MS must start a
location updating process after performing cell reselection. C32 values
obtained at the boundary for two adjacent cells are different because of
fading characteristic of radio channel, which causes the MS to select
cell frequently.
Although the interval of two cell reselections performed by the MS is not
less than 15 s, 15 s is too short for location updating. Consequently,
The signalling traffic of the network increases greatly, radio resources
cannot be used completely, and the accessibility is reduced due to the
MS cannot make a response to a paging during location updating.
In this case, The CELL RESELECTION HYSTERESIS parameter
is specified in the specification, to require that the MS initiates cell
reselection until the signal level of the adjacent cell (the location area
and the local cell are different) is greater than that of the local cell, and
the difference between them is greater than the value specified by the
CELL RESELECTION HYSTERESIS parameter.
When the traffic in one area is large with signalling traffic always
overloaded, it is recommended to increase the value of the CELL
RESELECTION HYSTERESIS parameter that belongs to different LAC
Description adjacent cells in this area.

2-1499

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the overlapped coverage scope of adjacent cells that belong to


different location areas is large, it is recommended to increase the CELL
RESELECTION HYSTERESIS parameter value.
If the coverage at the boundary for adjacent cells that belong to different
location areas is poor (that is, a coverage gap occurs), or the boundary
is on the express way or at the area where there is less motion objects,
it is recommended to set the CELL RESELECTION HYSTERESIS
parameter value as 1 to 3 (that is, the hysteresis level is from 2 dB to 6
dB).
This parameter indicates the parameters used during reselection on idle
status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason Recommended value from field experience

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.10 Routing reselection hysteresis in idle


Full Name Routing reselection hysteresis in idle

2-1500

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation raReselHys1

Managed Object NC2 Configuration

3GPP Name RA_RESELECT_HYSTERESIS

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is broadcast to the MS through


system message by BTS, to specify the extra hysteresis value used in
selecting a cell in another routing area when the MS is in STANDBY
or READY mode. When this parameter has the same value as
CellReselHys, it does not need to be broadcast in the PSI3 message.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 4

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1501

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.37.11 Random access attempt permitted in idle


Full Name Random access attempt permitted in idle

Abbreviation radAcRetry1

Managed Object NC2 Configuration

3GPP Name None

3GPP Reference N/A

This parameter is used at the MS side. It is broadcast to the MS through


system message by BTS, which indicates if the MS is allowed to attempt
to access another cell (if any).
If there is abnormal release in the packet transmission, the MS will
discard all running TBFs. If MS is allowed to access other cells, it should
perform abnormal cell reselection, and establish TBF after initializing
new cell. If there are other suitable cells, the MS cannot reselect the
original cell within T_RESEL seconds.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason Recommended value from field experience

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

2-1502

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.37.12 Usage of cell reselection offset in idle


Full Name Usage of cell reselection offset in idle

Abbreviation c32_Qual1

Managed Object NC2 Configuration

3GPP Name C32_QUAL

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is broadcast to the MS through


system message by BTS, which indicates to use the exceptional rule
when adopting ReselOff.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

2-1503

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.37.13 GPRS access minimal signal level in idle


Full Name GPRS access minimal signal level in idle

Abbreviation rxLevAsMin1

Managed Object NC2 Configuration

3GPP Name GPRS_RXLEV_ACCESS_MIN

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is informed to the MS on


PACCH.
It indicates the minimum receiving level for the MS to access the GPRS
system. To prevent the MS from accessing the system at a low receiving
signal level (usually, the poor communication quality cannot guarantee
normal communications after accessing) and from unreasonably wasting
radio sources of the network, it is stipulated in the GSM system that
the receiving level be more than a threshold level for MS to access the
network, that is, Min RxLev Needed (the minimum receiving level that
allows MS to access the cell).
In addition, it is also one of the standards for MS to make cell selection
and reselection (a parameter to calculate C31 and C32).
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 12

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1504

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.14 HCS exist in idle


Full Name HCS exist in idle

Abbreviation hcs_Exist1

Managed Object NC2 Configuration

3GPP Name None

3GPP Reference N/A

This parameter is used at the MS side. This parameter belongs to


Hierarchical Cell Structure (HCS) and is broadcast to MS via system
message by BTS. This parameter indicates whether the HCS parameters
(PriorityClass and HCSTHr) exist in the cell. If the local cell does not use
HCS parameters, the HCS parameters of other cells will also be ignored,
that is, all the cells use the HCS signal strength threshold of infinity.
This parameter indicates the parameters used during reselection on idle
Description status, which only functions while configuring PBCCH.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1505

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.15 GPRS MAX initial access signal level in idle


Full Name GPRS MAX initial access signal level in idle

Abbreviation msTxMaxCCH1

Managed Object NC2 Configuration

3GPP Name GPRS_MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is broadcast to the MS via


system message by BTS.
In the process of the MS communicating with the BTS, the MS' power is
controlled by the networkl through a power command. That is, the MS
must output power in accordance with the transmission power specified
by the network. If the MS' power level cannot meet the requirement for
outputing the power value, it putputs the power approximately close
to the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, being involved in the calculation of C1 and C2.
If this parameter value is too large, the MS nearby the BTS will interfere
in the adjacent channel. If it is too small, the successful accessibility of
the MS on the cell edge will be low.
This parameter is set in accordance with the following: In case the
MS on the cell edge has certain successful accessibility, try to reduce
the MS' receiving level to a great extent. Obviously, the larger the cell
coverage is, the higher the MS' output power level. Generally, it is
recommended to set this parameter to 5 (corresponding to GSM900MS)
and 2 (corresponding to GSM1800MS).
In the actual application, user can determine to raise or lower this
parameter value through an experiment after this parameter is set.

Description That is, make a dial-up experiment on the cell edge, and test the MS'

2-1506

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

successful accessibility and access time under different parameter


settings.
This parameter value is same as the appendix.
This parameter indicates the parameters used during reselection on idle
status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Recommended value from field experience

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.16 Cell reselection offset in transfer


Full Name Cell reselection offset in transfer

Abbreviation reselOff2

Managed Object NC2 Configuration

3GPP Name GPRS_RESELECT_OFFSET

3GPP Reference 3GPP TS 45.008

2-1507

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Thia parameter is used at the MS side, informing the MS on PACCH.


In the GPRS system, C32 is used as the standard for cell reselection.
Similar to the C2 standard in GSM, there is a cell reselection offset
parameter (ReselOff) for calculation of the C32 standard. When the
offset represented by this parameter is 0 dB, it needs not be indicated in
the packet system message.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.17 Cell reselection temporary offset in transfer


Full Name Cell reselection temporary offset in transfer

Abbreviation tempOffset2

Managed Object NC2 Configuration

3GPP Name GPRS_TEMPORARY_OFFSET

2-1508

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side, informing the MS on PACCH.


In the GPRS system, C32 is used as the standard for cell reselection.
Similar to the C2 standard in GSM, there is a temporary offset parameter
TempOffset for calculation of the C32 standard and it provides the
C32 standard with a negative offset.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.18 Penalty time of cell reselection in transfer


Full Name Penalty time of cell reselection in transfer

Abbreviation penalTime2

Managed Object NC2 Configuration

2-1509

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name GPRS_PENALTY_TIME

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side, informing the MS on PACCH.


In the GPRS system, C32 is used as the standard for cell reselection.
There is a temporary offset (TempOffset) in C32 that provides a negative
offset, similar to C2 in GSM system. The effective time depends on
Penalty Time of cell reselection.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.19 Interval of reselecting the same cell in transfer


Full Name Interval of reselecting the same cell in transfer

Abbreviation t_Resel2

2-1510

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object NC2 Configuration

3GPP Name T_RESEL

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side, to inform the MS on PACCH.


When MS performs a cell reselection that causes abnormal release of
this cell, it is not allowed to reselect this cell again within the T_RESEL
period, unless there is no other cells for selection. When the time
represented by this parameter is the default value (5s), it does not need
to be broadcast to the MS in the PSI3 message.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The period of time indicated by this parameter


Configuration Rule and
determines the period during which the MS is not allowed to re-select
Adjustment Suggestion
this cell.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1511

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.37.20 Threshold of HSC signal level in transfer


Full Name Threshold of HSC signal level in transfer

Abbreviation hcs_Thr2

Managed Object NC2 Configuration

3GPP Name HCS_THR

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to HCS parameter,


which is informed to MS on PACCH. It indicates the HCS signal strength
threshold of the cell.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

The parameter indicates the minimum access


Configuration Rule and electricity level threshold. It is easier to access a cell when the
Adjustment Suggestion threshold gets lower. Increase the threshold to limit the MS access
to a cell.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1512

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.21 HCS Priority in transfer


Full Name HCS Priority in transfer

Abbreviation prioClass2

Managed Object NC2 Configuration

3GPP Name PRIORITY_CLASS

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to HCS parameter,


which is informed to MS on PACCH, speciyings the HCS priority of the
cell.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and The priority of an HCS cell gets higher with
Adjustment Suggestion the increase of the parameter value.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1513

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.37.22 C31 hysteresis in transfer


Full Name C31 hysteresis in transfer

Abbreviation c31_Hyst2

Managed Object NC2 Configuration

3GPP Name C31_HYST

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is informed to the MS on


PACCH and specifies whether to use the parameter CellReselHys
on the C31 standard.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This is a NC2 reset parameter. Set the parameter
Adjustment Suggestion "Yes" to function the reset hysteresis with the C31 standard.

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1514

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.23 GPRS cell reselection hysteresis in transfer


Full Name GPRS cell reselection hysteresis in transfer

Abbreviation reselHys2

Managed Object NC2 Configuration

3GPP Name GPRS_CELL_RESELECT_HYSTERESIS

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is informedt to the MS on


PACCH.
When the MS performs GPRS cell reselection, if the source cell and
the target cell belong to different location areas, the MS must start a
location updating process after performing cell reselection. C32 values
obtained at the boundary for two adjacent cells are different because of
fading characteristic of radio channel, which causes the MS to select
cell frequently.
Although the interval of two cell reselections performed by the MS is not
less than 15 s, 15 s is too short for location updating. Consequently,
The signalling traffic of the network increases greatly, radio resources
cannot be used completely, and the accessibility is reduced due to the
MS cannot make a response to a paging during location updating.
In this case, The CELL RESELECTION HYSTERESIS parameter
is specified in the specification, to require that the MS initiates cell
reselection until the signal level of the adjacent cell (the location area
and the local cell are different) is greater than that of the local cell, and
the difference between them is greater than the value specified by the
CELL RESELECTION HYSTERESIS parameter.
When the traffic in one area is large with signalling traffic always
overloaded, it is recommended to increase the value of the CELL
RESELECTION HYSTERESIS parameter that belongs to different LAC
adjacent cells in this area.
If the overlapped coverage scope of adjacent cells that belong to
different location areas is large, it is recommended to increase the CELL
RESELECTION HYSTERESIS parameter value.
If the coverage at the boundary for adjacent cells that belong to different
location areas is poor (that is, a coverage gap occurs), or the boundary
is on the express way or at the area where there is less motion objects,
it is recommended to set the CELL RESELECTION HYSTERESIS
parameter value as 1 to 3 (that is, the hysteresis level is from 2 dB to 6
dB).
This parameter is used at the MS side. It is informed to the MS on
Description PACCH.

Instance Cell

2-1515

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

When the rraffic in a certain area is large and the signalling traffic
is always overloaded, it is recommended to increase the CELL
RESELECTION PARAMETER of the adjacent cell of different LACs.
If the overlapped coverage scope of adjacent cells in different location
areas is large, it is recommended to increase the CELL RESELECTION
Configuration Rule and
HYSTERESIS parameter.
Adjustment Suggestion
If the coverage at the boundary of adjacent cells in different LAC is poor,
(that is, a coverage gap occurs), or the boundary is on the express way
where slow motion objects seldom exist, it is recommended to set the
CELL RESELECTION HYSTERESIS parameter value as 1 to 3 (that is,
the reselection hysteresis level is from 2 dB to 6 dB).

Change Mode Offline

Related features ZGO-02-02-009 Support of C31 and C32 Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.24 Routing reselection hysteresis in idle


Full Name Routing reselection hysteresis in idle

Abbreviation raReselHys2

Managed Object NC2 Configuration

3GPP Name RA_RESELECT_HYSTERESIS

2-1516

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is informed to the MS on


PACCH, specifying the extra hysteresis value used in selecting a cell
in another routing area when the MS is in STANDBY or READY mode.
When this parameter has the same value as CellReselHys, it does not
need to be broadcast in the PSI3 message.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 4

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

Configuration Rule and When adjacent cells in different routing zone have a large overlapped
Adjustment Suggestion coverage area, increase the value of the cell re-selection parameters.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.25 Random access attempt permitted in transfer


Full Name Random access attempt permitted in transfer

Abbreviation radAcRetry2

Managed Object NC2 Configuration

2-1517

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name None

3GPP Reference N/A

This parameter is used at the MS side. It is informed to the MS on


PACCH, indicating whether the MS is allowed to attempt to access
another cell (if it exists).
If there is abnormal release in the packet transmission, the MS will
discard all running TBFs. If the MS is allowed to access other cells,
it should perform abnormal cell reselection, and establish TBF after
initializing a new cell. If there are other suitable cells, the MS cannot
reselect the original cell within T_RESEL seconds.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration according to the range starting value

Configuration Rule and This parameter is relevant to PBCCH, and is


Adjustment Suggestion not recommended to be used.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1518

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.26 Usage of cell reselection offset in transfer


Full Name Usage of cell reselection offset in transfer

Abbreviation c32_Qual2

Managed Object NC2 Configuration

3GPP Name C32_QUAL

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is informed to the MS on


PACCH, specifying whether to use the exceptional rule for ReselOff.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value This parameter only functions while configuring PBCCH, but PBCCH is
Configuration Reason not configured by default

This parameter should be set on demand of user needs. If it is set "Yes",


Configuration Rule and
ReselOff will be set with a suggested default value according to the rules
Adjustment Suggestion
described in protocol 45008 10.1.3 Cell Re-selection Algorithm.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1519

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.37.27 GPRS access minimal signal level in idle


Full Name GPRS access minimal signal level in idle

Abbreviation rxLevAsMin2

Managed Object NC2 Configuration

3GPP Name GPRS_RXLEV_ACCESS_MIN

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is informed to the MS on


PACCH.
It indicates the minimum receiving level for the MS to access the GPRS
system. To prevent the MS from accessing the system at a low receiving
signal level (usually, the poor communication quality cannot guarantee
normal communications after accessing) and from unreasonably wasting
radio sources of the network, it is stipulated in the GSM system that
the receiving level be more than a threshold level for MS to access the
network, that is, Min RxLev Needed (the minimum receiving level that
allows MS to access the cell).
In addition, it is also one of the standards for MS to make cell selection
and reselection (a parameter to calculate C31 and C32).
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 12

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

Configuration Rule and


Adjustment Suggestion This parameter is used for cell re-selection.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1520

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.28 HCS exist in transfer


Full Name HCS exist in transfer

Abbreviation hcs_Exist2

Managed Object NC2 Configuration

3GPP Name None

3GPP Reference N/A

This parameter is used at the MS side, belonging to Hierarchical Cell


Structure (HCS). It is informed to the MS on PACCH, to indicate whether
the HCS parameters (PriorityClass and HCSTHr) exist in the cell. If
the local cell does not use HCS parameters, the HCS parameters of
other cells will also be ignored, that is, all the cells use the HCS signal
strength threshold of infinity.
This parameter indicates the parameter used during reselection in
Description transmission state.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Recommended value from field experience

When the radio network have different cell


reselection priority, set this parameter "Yes" if the C31 judgment
Configuration Rule and
criteria for the priority cell reselection and signal level threshold
Adjustment Suggestion
are applied. When more than one cell has the highest priority, C32
judgment criteria should be used for the cells with a same priority.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

2-1521

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.29 GPRS MAX initial access signal level in transfer


Full Name GPRS MAX initial access signal level in transfer

Abbreviation msTxMaxCCH2

Managed Object NC2 Configuration

3GPP Name GPRS_MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

This parameter is used at the MS side. It is broadcast to the MS via


system message by BTS.
In the process of the MS communicating with the BTS, the MS' power is
controlled by the networkl through a power command. That is, the MS
must output power in accordance with the transmission power specified
by the network. If the MS' power level cannot meet the requirement for
outputing the power value, it putputs the power approximately close
to the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, being involved in the calculation of C1 and C2.
If this parameter value is too large, the MS nearby the BTS will interfere
in the adjacent channel. If it is too small, the successful accessibility of
the MS on the cell edge will be low.
This parameter is set in accordance with the following: In case the
MS on the cell edge has certain successful accessibility, try to reduce
the MS' receiving level to a great extent. Obviously, the larger the cell
coverage is, the higher the MS' output power level. Generally, it is
recommended to set this parameter to 5 (corresponding to GSM900MS)
and 2 (corresponding to GSM1800MS).
In the actual application, user can determine to raise or lower this
parameter value through an experiment after this parameter is set.

Description That is, make a dial-up experiment on the cell edge, and test the MS'

2-1522

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

successful accessibility and access time under different parameter


settings.
This parameter indicates the parameters used during reselection on idle
status, which only functions while configuring PBCCH.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The setting for this parameter should follow


this principle: guarantee a certain success rate of MS access at the
Configuration Rule and cell edge while decreasing the access level of MS as much as possible.
Adjustment Suggestion Obviously, the coverage area increases with the uplift of MS output
power. It is recommended to set this parameter 5 (for GSM900MS) and
2 (for GSM1800MS).

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.30 NC hold time in non-drx mode


Full Name NC hold time in non-drx mode

Abbreviation ncNoDrxPer

Managed Object NC2 Configuration

3GPP Name NC_ NON_DRX_PERIOD

2-1523

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to network control


survey parameter. It is broadcast to the MS through the SI2Quater
system message on BCCH when the network operates in NC1 or NC2
mode. On PACCH, this parameter can also be sent to a certain MS
through the PACKET MEASUREMENT ORDER or the PACKET CELL
Description CHANGE ORDER message, functioning on the target cell.

Instance Cell

Value Range and Step 0..7

Unit s

Default Value 2

Default Value compromise saving battery and cutting down the TBF establishment
Configuration Reason period, the value is 0.48s.

In non-DRX mode, MS consumes more power. Therefore,


when DRX_Timer_Max is large, TBF establishment time can be reduced,
Configuration Rule and but the power consumption of MS increases. When the value is small,
Adjustment Suggestion the power of MS is saved, but the signalling load of the system increases
and data transmission delay increases because paging process is added
in DRX mode.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters CtrlOrder

If NC1 or NC2 is enabled, this parameter is


Relationship
valid.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1524

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.31 Packet idle mode


Full Name Packet idle mode

Abbreviation ncRepPerI

Managed Object NC2 Configuration

3GPP Name NC_REPORTING_PERIOD_I

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to network control sur-


vey parameter. When the network operates in NC1 or NC2 mode, It is
broadcast to the MS through the SI2Quater system message on BCCH,
indicating the period of reporting the cell reselection measurement report
when the MS is in dile mode. On PACCH, this parameter can also be
sent to a certain MS through the PACKET MEASUREMENT ORDER or
the PACKET CELL CHANGE ORDER message, functioning on the target
Description cell.

Instance Cell

0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
Value Range and Step 7: 61.44

Unit s

Default Value 7

Default Value
Configuration Reason Protocol Recommended Value

Configuration Rule and NC2 function is not enabled currently, so it


Adjustment Suggestion is better not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters CtrlOrder

If NC1 or NC2 is enabled, this parameter is


Relationship
valid.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1525

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.32 Packet transmission mode


Full Name Packet transmission mode

Abbreviation ncRerPerT

Managed Object NC2 Configuration

3GPP Name NC_REPORTING_PERIOD_T

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It belongs to network control sur-


vey parameter. When the network operates in NC1 or NC2 mode, It is
broadcast to the MS through the SI2Quater system message on BCCH,
indicating the period of reporting the cell reselection measurement report
when the MS is in packet transmission mode. When ETWORK_CON-
TROL_ORDER is 0, this parameter may not be broadcast in the PSI5
message. On PACCH, this parameter can also be sent to a certain MS
through the PACKET MEASUREMENT ORDER or the PACKET CELL
Description CHANGE ORDER message, functioning on the target cell.

Instance Cell

0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
Value Range and Step 7: 61.44

Unit s

Default Value 3

Default Value
Configuration Reason Protocol Recommended Value

2-1526

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

the lower the value is, the more frequently


the measurement reported, and the more accuracy of measurement
Configuration Rule and
calculation
Adjustment Suggestion
and cell reselection, but the more the signalling load is.Set the
value in accordance with the actual network load.

Change Mode Offline

Related features ZGO-02-02-012 Network Controlled Cell Reselection

Related Parameters CtrlOrder

If NC1 or NC2 is enabled, this parameter is


Relationship
valid.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.33 Extended measurement report order


Full Name Extended measurement report order

Abbreviation exMeaOrder

Managed Object NC2 Configuration

3GPP Name EXT_MEASUREMENT_ORDER

3GPP Reference 3GPP TS 44.060 V5.19.0R6

This parameter is used at the MS side. It belongs to the extended


measurement parameters, and
is broadcast to the MS in the PSI5 message, indicating whether the
MS can perform extended measurement, and how to inrerpret the
left extended measurement parameters (such as ExtRepType, and
ExtRepPer) . This parameter value is as follows:
EMO: The MS should not perform extended measurement
EM1: The MS should send the extended measurement report to the
Description network

Instance Cell

2-1527

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

Configuration Rule and This parameter is related to the configuration


Adjustment Suggestion of PBCCH channel, so it is recommended not to use the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.34 Type of extended measurement report


Full Name Type of extended measurement report

Abbreviation extRepType

Managed Object NC2 Configuration

3GPP Name EXT_REPORTING_TYPE

3GPP Reference 3GPP TS 44.060 V5.19.0R6

2-1528

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used at the MS side. It belongs


to the extended survey parameters, and is broadcast to the MS in
the PSI5 message on PBCCH, indicating the type of the extended
survey report
of MS. The system sends the parameter information through the PSI5
message
when the extended measurement report order is EM1.
The values are as follows:
Type I: This type of report must be extended if the frequency
points for the extended survey are among the six strongest carrier
frequencies, even if the BSIC decoding is successful. The report should
cover the receiving signal level and the successfully decoded BSIC
(if any);
Type2: This type of report must be extended if all the frequency
points for the extended survey are located in the six strongest carrier
frequencies, the BSIC decoding is successful and the NCC part is
allowed
for survey. The report should cover the receiving signal level and
the successfully decoded BSIC.
Type3: Use this type of report to report all the frequency
points for the extended survey. No BSIC decoding is necessary. The
report should contain the receiving signal level. Besides, the interference
Description of each carrier frequency shall be reported.

Instance Cell

Value Range and Step 0..2

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

Configuration Rule and This parameter is related to the configuration


Adjustment Suggestion of PBCCH channel, so it is recommended not to use the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1529

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.35 Report period of extended measurement


Full Name Report period of extended measurement

Abbreviation extRepPer

Managed Object NC2 Configuration

3GPP Name EXT_REPORTING_PERIOD

3GPP Reference 3GPP TS 44.060 V5.19.0R6

This parameter is used at the MS side.


It belongs to the extended survey parameters and is broadcast to
the MS in the PSI5 message on PBCCH, indicating the interval of
extended survey
report. The system sends the parameter information through the PSI5
Description message when the extended measurement report order is EM1.

Instance Cell

0: 60
1: 120
2: 240
3: 480
4: 960
5: 1920
6: 3840
Value Range and Step 7: 7680

Unit s

Default Value 5

Default Value
Configuration Reason the parameter is proposed disable owning to relative to PBCCH

Configuration Rule and This parameter is related to the configuration


Adjustment Suggestion of PBCCH channel, so it is recommended not to use the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1530

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.36 The size of test report's slip window


Full Name The size of test report's slip window

Abbreviation wnd

Managed Object NC2 Configuration

3GPP Name None

3GPP Reference N/A

When NC2 network controls the cell reselection, this parameter is used.
When the number of measurement reports reaches this parameter setting
Description value, average processing is done for measurement report.

Instance Cell

Value Range and Step 1..8

Unit N/A

Default Value 4

Default Value
Configuration Reason Considering the functional effects and implementation

The smaller the window size is, the greater


Configuration Rule and the random interference is. If the window size is too large, the
Adjustment Suggestion real-time-change
of radio signal cannot be reflected.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1531

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.37 Minimum measurement reports in slip window to avoid


penalty
Full Name Minimum measurement reports in slip window to avoid penalty

Abbreviation allowedRepNum

Managed Object NC2 Configuration

3GPP Name None

3GPP Reference N/A

When NC2 network controls the cell reselection, this parameter is used.
When the adjacent cell receives the average level, and the number of valid
measurement reports received in slip window is lower than the setting
Description value, this calculation shall be punished.

Instance Cell

Value Range and Step 1..6

Unit N/A

Default Value 3

Default Value
Configuration Reason Considering the functional effects and implementation

The larger this parameter value is, the more


is the number of penalties performed by the adjacent cell, the higher
Configuration Rule and the reselection threshold is. In that case, the network is unable
Adjustment Suggestion to notify the MS of reselection, which may lead to TBF failure occurs.
The smaller the parameter value is, the lower the reselection threshold
is, which may cause frequent reselection.

Change Mode Offline

Related features N/A

2-1532

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.38 Enable uplink interference decision in NC2


Full Name Enable uplink interference decision in NC2

Abbreviation nc2UlInterControl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable


uplink interference decision in NC2.
0: Disabled
Description 1: Enabled

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Based on the signal strength, enable this function if quality is expected
Adjustment Suggestion to be taken into consideration during decision.

Change Mode Offline

Related features N/A

Related Parameters CtrlOrder

2-1533

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.39 Enable downlink interference decision in NC2


Full Name Enable downlink interference decision in NC2

Abbreviation nc2DlInterControl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable


downlink interference decision in NC2.
0: Disabled
Description 1: Enabled

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and Based on the signal strength, enable this function if quality is expected
Adjustment Suggestion to be taken into consideration during decision.

Change Mode Offline

Related features N/A

Related Parameters CtrlOrder

Relationship N/A

2-1534

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.40 P of uplink interference decision in NC2


Full Name P of uplink interference decision in NC2

Abbreviation nc2UlLevP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the P value of uplink


interference decision. Uplink interference is made if more than P out of
N AvRxQualUL value satify AvRxQualULs<InterfFQSS(s). Where,
AvRxQualUL(s) is the average uplink bit error rate (MEAN_BEP),
and InterfFQSS(s) is the bit error rate threshold FQSS calculated by
Description AvRxLevUL(s).

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value The purpose is to ensure that the decisions can be made quickly and
Configuration Reason correctly.

A greater value indicates more accurate reselection decision and worse


Configuration Rule and
real-time performance. A lower value indicates reduced reselection
Adjustment Suggestion
decision accuracy and improved real-time performance.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

2-1535

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.41 N of uplink interference decision in NC2


Full Name N of uplink interference decision in NC2

Abbreviation nc2UlLevN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the P value of uplink


interference decision. Uplink interference is made if more than P out of
N AvRxQualUL value satify AvRxQualULs<InterfFQSS(s). Where,
AvRxQualUL(s) is the average uplink bit error rate (MEAN_BEP),
and InterfFQSS(s) is the bit error rate threshold FQSS calculated by
Description AvRxLevUL(s).

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value This parameter is recommended to be set to ensure correct and fast
Configuration Reason decision.

A greater value indicates more accurate reselection decision and worse


Configuration Rule and
real-time performance. A lower value indicates reduced reselection
Adjustment Suggestion
decision accuracy and improved real-time performance.

Change Mode Offline

Related features N/A

2-1536

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.42 P of downlink interference decision in NC2


Full Name P of downlink interference decision in NC2

Abbreviation nc2DlLevP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the P value of downlink


interference decision. Downlink interference is made if more than P
out of N AvRxQualUL value satify AvRxQualDLs<InterfFQSS(s).
Where, AvRxQualDL(s is the average downlink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold FQSS
Description calculated by AvRxLevDL(s) (that is, C value).

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value The purpose is to ensure that the decisions can be made quickly and
Configuration Reason correctly.

A greater value indicates more accurate reselection decision and worse


Configuration Rule and
real-time performance. A lower value indicates reduced reselection
Adjustment Suggestion
decision accuracy and improved real-time performance.

Change Mode Offline

2-1537

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.43 N of downlink interference decision in NC2


Full Name N of downlink interference decision in NC2

Abbreviation nc2DlLevN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the N value of downlink


interference decision. Downlink interference is made if more than P
out of N AvRxQualUL value satify AvRxQualDLs<InterfFQSS(s).
Where, AvRxQualDL(s is the average downlink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold FQSS
Description calculated by AvRxLevDL(s) (that is, C value).

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value This parameter is recommended to be set to ensure correct and fast
Configuration Reason decision.

A greater value indicates more accurate reselection decision and worse


Configuration Rule and
real-time performance. A lower value indicates reduced reselection
Adjustment Suggestion
decision accuracy and improved real-time performance.

2-1538

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.44 Uplink interference quality offset


Full Name Uplink interference quality offset

Abbreviation qoffSetUl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

For uplink interferencethe formula of FQSS is as shown in .


XOffset and YOffset mean SOffSetUl and QOffSetUl.
This parameter is used to check the relation between level and quality to
judge whether there is any interference in service
judgment channel when handover occurs in the cell.
rxqual-ul QoffSetUl + FQSS (RXLEV_UL+SOffSetUl) or rxqual-dl
QOffSetDl + FQSS (RXLEV_DL+SoffSetDl). Where, rxqual-xx is
uplink/downlink quality, QoffSetxx is uplink/downlink quality offset,
RXLEV_XX is uplink/downlink level, SoffSetxx is uplink/downlink level
offset.
After interference is confirmed, when service party requests channel
from database, which shall tell original occupation condition of database,
Description then the database selects proper channels based on this information.

Instance Cell

2-1539

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: -8 dB
1: -7 dB
2: -6 dB
3: -5 dB
4: -4 dB
5: -3 dB
6: -2 dB
7: -1 dB
8: 0 dB
9: 1 dB
10: 2 dB
11: 3 dB
12: 4 dB
13: 5 dB
14: 6 dB
15: 7 dB
Value Range and Step 16: 8 dB

Unit dB

Default Value 8

Default Value Setting of the default value is in accordance


Configuration Reason with the common uplink interference environment.

The larger the value is, the higher the quality


Configuration Rule and tolerability under the corresponding level is, and it is more difficult
Adjustment Suggestion to initiate quality handover which should be adjusted in accordance
with the actual network situation.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1540

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.45 Uplink interference level offset


Full Name Uplink interference level offset

Abbreviation soffSetUl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

For uplink interferencethe formula of FQSS is as shown in .


XOffset and YOffset mean SOffSetUl and QOffSetUl.
This parameter is used to check the relation between level and quality
to judge whether there is any interference in service judgment channel
when handover occurs in the cell.
rxqual-ul QoffSetUl + FQSS (RXLEV_UL+SOffSetUl) or rxqual-dl
QOffSetDl + FQSS (RXLEV_DL+SoffSetDl). Where, rxqual-xx is
uplink/downlink quality, QoffSetxx is uplink/downlink quality offset,
RXLEV_XX is uplink/downlink level, SoffSetxx is uplink/downlink level
offset.
After interference is confirmed, when service party requests channel
from database, which shall tell original occupation condition of database,
Description then the database selects proper channels based on this information.

Instance Cell

0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
Value Range and Step 20: 10 dB

2-1541

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit dB

Default Value 10

Default Value Setting of the default value is in accordance


Configuration Reason with the common uplink interference environment.

The larger the value is, the higher the requirement


on quality handover is, and it is more difficult to initiate quality
Configuration Rule and
handover which should be adjusted in accordance with the actual
Adjustment Suggestion
network
situation.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.46 Downlink interference quality offset


Full Name Downlink interference quality offset

Abbreviation qoffSetDl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1542

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Downlink interference, the formula of FQSS is shown in .


XOffset and YOffset mean SOffSetDl and QOffSetDl.
This parameter is used to check the relation between level and quality to
judge whether there is any interference in service
judgment channel when handover occurs in the cell.
rxqual-ul QoffSetUl + FQSS (RXLEV_UL+SOffSetUl) or rxqual-dl
QOffSetDl + FQSS (RXLEV_DL+SoffSetDl). Where, rxqual-xx is
uplink/downlink quality, QoffSetxx is uplink/downlink quality offset,
RXLEV_XX is uplink/downlink level, SoffSetxx is uplink/downlink level
offset.
After interference is confirmed, when service party requests channel
from database, which shall tell original occupation condition of database,
Description then the database selects proper channels based on this information.

Instance Cell

0: -8 dB
1: -7 dB
2: -6 dB
3: -5 dB
4: -4 dB
5: -3 dB
6: -2 dB
7: -1 dB
8: 0 dB
9: 1 dB
10: 2 dB
11: 3 dB
12: 4 dB
13: 5 dB
14: 6 dB
15: 7 dB
Value Range and Step 16: 8 dB

Unit dB

Default Value 8

Default Value Setting of the default value is in accordance


Configuration Reason with the common downlink interference environment.

The larger the value is, the higher the quality


Configuration Rule and tolerability under the corresponding level is, and it is more difficult
Adjustment Suggestion to initiate quality handover which should be adjusted in accordance
with the actual network situation.

Change Mode Offline

Related features N/A

2-1543

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.47 Downlink interference level offset


Full Name Downlink interference level offset

Abbreviation soffSetDl

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Downlink interference, the formula of FQSS is shown in .


XOffset and YOffset mean SOffSetDl and QOffSetDl.
This parameter is used to check the relation between level and quality
to judge whether there is any interference in service judgment channel
when handover occurs in the cell.
rxqual-ul QoffSetUl + FQSS (RXLEV_UL+SOffSetUl) or rxqual-dl
QOffSetDl + FQSS (RXLEV_DL+SoffSetDl). Where, rxqual-xx is
uplink/downlink quality, QoffSetxx is uplink/downlink quality offset,
RXLEV_XX is uplink/downlink level, SoffSetxx is uplink/downlink level
offset.
After interference is confirmed, when service party requests channel
from database, which shall tell original occupation condition of database,
Description then the database selects proper channels based on this information.

Instance Cell

2-1544

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
Value Range and Step 20: 10 dB

Unit dB

Default Value 10

Default Value Setting of the default value is in accordance


Configuration Reason with the common downlink interference environment.

The larger the value is, the higher the requirement


on quality handover is, and it is more difficult to initiate quality
Configuration Rule and
handover which should be adjusted in accordance with the actual
Adjustment Suggestion
network
situation.

Change Mode Offline

Related features N/A

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

2-1545

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.48 Num of samples that calculates average of uplink signal


level in NC2
Full Name Num of samples that calculates average of uplink signal level in NC2

Abbreviation nc2UlLevWindow

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used to calculate the


Description average value of uplink signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 12

Sufficient samples should be provided to ensure that reselection


Default Value
decisions are accurate and calls can initiate reselection as early as
Configuration Reason
possible when signal quality is bad.

If the parameter is set too low, few reselection decision samples can be
provided and thus the reselection decision is not accurate.
Configuration Rule and
If the parameter is set too high, the reselection decision requires too
Adjustment Suggestion
long time and thus call drops may occur because reselection cannot
be done in time.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1546

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.49 Num of samples that calculates average of downlink signal


level in NC2
Full Name Num of samples that calculates average of downlink signal level in NC2

Abbreviation nc2DlLevWidow

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used to calculate the


Description average value of downlink signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

Sufficient samples should be provided to ensure that reselection


Default Value
decisions are accurate and calls can initiate reselection as early as
Configuration Reason
possible when signal quality is bad.

If the parameter is set too low, few reselection decision samples can be
provided and thus the reselection decision is not accurate.
Configuration Rule and
If the parameter is set too high, the reselection decision requires too
Adjustment Suggestion
long time and thus call drops may occur because reselection cannot
be done in time.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1547

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.50 Num of samples that calculates average of uplink quality


level in NC2
Full Name Num of samples that calculates average of uplink quality level in NC2

Abbreviation nc2UlQualWindow

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used to calculate the


Description average value of uplink signal quality.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 12

Sufficient samples should be provided to ensure that reselection


Default Value
decisions are accurate and calls can initiate reselection as early as
Configuration Reason
possible when signal quality is bad.

If the parameter is set too low, few reselection decision samples can be
provided and thus the reselection decision is not accurate.
Configuration Rule and
If the parameter is set too high, the reselection decision requires too
Adjustment Suggestion
long time and thus call drops may occur because reselection cannot
be done in time.

Change Mode Offline

Related features N/A

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1548

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.51 Num of samples that calculates average of downlink quality


level in NC2
Full Name Num of samples that calculates average of downlink quality level in NC2

Abbreviation nc2DlQualWindow

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used to calculate the


Description average value of downlink signal quality.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

Sufficient samples should be provided to ensure that reselection


Default Value
decisions are accurate and calls can initiate reselection as early as
Configuration Reason
possible when signal quality is bad.

If the parameter is set too low, few reselection decision samples can be
provided and thus the reselection decision is not accurate.
Configuration Rule and
If the parameter is set too high, the reselection decision requires too
Adjustment Suggestion
long time and thus call drops may occur because reselection cannot
be done in time.

Change Mode Offline

Related features N/A

Related Parameters nc2DlInterControl

Relationship N/A

Related Interfaces N/A

2-1549

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.52 NC2 mode between 2G and 3G


Full Name NC2 mode between 2G and 3G

Abbreviation NC2For23G

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable the NC2 function between


2G and 3G. The value 0 indicates that the NC2 function is not enabled for
interoperation between 2G and 3G. The value 1 indicates that the NC2
function is enabled between 2G and 3G. For the reselection mode applied
between 2G and 3G, perform an OR operation according to this functional
switch and the NC2 functional switch of CtrlOrder. That is, when CtrlOrder
is configured to NC2, the NC2 mode is applied for 2G-2G and 2G-3G.
When CtrlOrder is configured to NC0 and NC2For23G is configured to 1,
the NC0 mode is applied for 2G-2G and the NC2 mode is applied for 2G
Description and 3G. This functional switch is the subset of CtrlOrder.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

If the parameter is set too high, the reselection decision requires too
Configuration Rule and
long time and thus call drops may occur because reselection cannot
Adjustment Suggestion
be done in time.

Change Mode Offline

2-1550

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.37.53 Serving Cell Load Threshold


Full Name Serving Cell Load Threshold

Abbreviation ServCellLoadThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates that the system triggers reselection for network
control when the load of a 2G cell exceeds a certain threshold. The load
Description is calculated based on channel usage.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason general value

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to network operation planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1551

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.37.54 Serving Cell Capacity Threshold


Full Name Serving Cell Capacity Threshold

Abbreviation ServCellCapaThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates that the system triggers reselection for network
control when the remaining access capacity of a 2G cell is lower than a
certain threshold. The remaining access capacity is the subtraction of the
Description total capacity from the used capacity.

Instance Cell

Value Range and Step 1..100

Unit %

Default Value 30

Default Value
Configuration Reason general value

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to network operation planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

2-1552

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.37.55
Cell reselection control switch
by serving cell traffic busy
Cell reselection control switch
Full Name by serving cell traffic busy

Abbreviation PsTrafResel

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to enable reselection for the PS


service of a cell. When this function is enabled, the system triggers
reselection for network control if the load of this cell exceeds the 2G
threshold. If this function is not enabled, the system does not reference
the load of this cell.
Description 0: This function is not enabled; 1: This function is enabled.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and To trigger reselection for network control


Adjustment Suggestion according to the congestion of a 2G cell, enable this switch.

Change Mode Offline

Related features N/A

2-1553

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.37.56 Is Dual-Frequency NC2 Support


Full Name Is Dual-Frequency NC2 Support

Abbreviation DualFreqNC2Sup

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to support dual-frequency NC2. Only


Description the load-based NC2 is involved.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason A function required by China Mobile

2-1554

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

For load-based Network Controlled Cell Reselection (NCCR), this


parameter is independent of other decisions on triggering conditions.
Specifically, this parameter is used to set a pair of dual-frequency NC2
related cells by using the neighbor cell parameter IsDualFreqRltCell (The
Configuration Rule and
restrictions are: only one pair is allowed; the cells are mutually related;
Adjustment Suggestion
the related cell must be located in the same module) when the load (in
uplink or downlink) in servicing cell A reaches the threshold defined by
DualCellPsChanThr and the load in related cell B of dual-frequency NC2
is lower than the threshold defined by the parameter DualCellPsChanThr.

Change Mode Offline

Related features N/A

Related Parameters CtrlOrder

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.57 Dual-Frequency NC2 Parameter N


Full Name Dual-Frequency NC2 Parameter N

Abbreviation DualFreqNC2N

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter sets the N value for determining dual-frequency NC2


Description based on level, quality, and TA.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 4

2-1555

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason To ensure correct and rapid reselections

A great value can eliminate the affects of signal fluctuation but may result
in hysteresis. A low value leads to quick decision but the correctness
Configuration Rule and
cannot be guaranteed.
Adjustment Suggestion
Note: This function is newly added to iBSC V6.20.713 and has only
experiment data.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.58 Dual-Frequency NC2 Parameter P


Full Name Dual-Frequency NC2 Parameter P

Abbreviation DualFreqNC2P

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter sets the P value for determining dual-frequency NC2


Description based on level, quality, and TA.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 3

2-1556

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason To ensure correct and rapid reselection

A great value can eliminate the affects of signal fluctuation but may result
in hysteresis. A low value leads to quick decision but the correctness
Configuration Rule and
cannot be guaranteed.
Adjustment Suggestion
Note: This function is newly added to iBSC V6.20.713 and has only
experiment data.

Change Mode Offline

Related features N/A

Related Parameters nc2UlInterControl

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.59 Dual-Frequency NC2 TA Threshold


Full Name Dual-Frequency NC2 TA Threshold

Abbreviation DualFreqNC2TAThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter sets the dual-frequency NC2 TA decision threshold. It is


Description used in TA-based reselection algorithms.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

2-1557

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

If the serving cell TA is larger than the threshold, the TA-based Network
Controlled Cell Reselection (NCCR) decision is triggered.
It is recommended to set the threshold to a large value, which helps
Configuration Rule and avoid unnecessary TA-based forced NCCR.
Adjustment Suggestion If the threshold is set to a small value, unnecessary TA-based forced
NCCR may occur, which will result in incorrect cell reselection.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.60 Dual-Frequency NC2 load Threshold


Full Name Dual-Frequency NC2 load Threshold

Abbreviation DualCellPsChanThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1558

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter sets the dual-frequency load-based NC2 decision


threshold. The load-based NC2 decision is triggered when the following
conditions are satisfied:
The uplink/downlink load of serving cell A reaches the threshold defined
by the DualCellPsChanThr parameter of A.
The uplink and downlink load of the dual-frequency NC2 associated
cell B is lower than the threshold defined by the DualCellPsChanThr
paraemeter of B.
The level of cell B satisfies the minimum access level (C1>0).
This parameter helps distinguish whether uplink services or downlink
services occupy TBFs. The decision formula is as follows: PS uplink
Description NC2 busyness = 100 all occupied TBFs

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

If the threshold is set to a large value, it will cause the load-based NC2
decision unabled to be implemented in a timely manner, but it can help
avoid unncessary load-based NC2.
Configuration Rule and If the threshold is set to a small value, it will cause the load-based NC2
Adjustment Suggestion decision to be implemented too early, and it will cause unnecessary
load-based NC2.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

2-1559

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.37.61 NC2 UL RxLevel Threshold


Full Name NC2 UL RxLevel Threshold

Abbreviation ULRxLevThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 uplink level decision threshold. It is


Description used in uplink-level-based reselection algorithms.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

If the uplink level of the serving cell is smaller than the threshold, the
Network Controlled Cell Reselection (NCCR) decision based on uplink
level is triggered.
It is recommended to set the threshold to a small value, which helps
Configuration Rule and
avoid unnecessary uplink-level-based NCCR.
Adjustment Suggestion
If the threshold is set to a large value, unnecessary uplink-level-based
NCCR may occur, which will result in incorrect cell reselection.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

2-1560

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.62 NC2 DL RxLevel Threshold


Full Name NC2 DL RxLevel Threshold

Abbreviation DLRxLevThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 downlink level decision threshold. It


Description is used in downlink-level-based reselection algorithms.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

If the downlink level of the serving cell is smaller than the threshold,
the Network Controlled Cell Reselection (NCCR) decision based on
downlink level is triggered.
It is recommended to set the threshold to a small value, which helps
Configuration Rule and
avoid unnecessary downlink-level-based NCCR.
Adjustment Suggestion
If the threshold is set to a large value, unnecessary downlink-level-based
NCCR may occur, which will result in incorrect cell reselection.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1561

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.63 NC2 UL RxQual Threshold


Full Name NC2 UL RxQual Threshold

Abbreviation ULRxQualThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 uplink quality decision threshold. It is


Description used in uplink-quality-based reselection algorithms.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 4

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

If the parameter value mapped from the uplink MEAN_BEP of the


serving cell is larger than the threshold, the Network Controlled Cell
Reselection (NCCR) decision based on uplink quality is triggered. The
corresponding relationship between MEAN_BEP and the parameter
value range is described as follows:
MEAN_BEP Parameter Value
0-3 7
Configuration Rule and 4-7 6
Adjustment Suggestion 8-11 5
12-15 4
16-19 3
20-23 2
24-27 1
28-31 0
It is recommended to set the threshold to a large value, which helps
avoid unnecessary uplink-quality-based NCCR.

2-1562

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.64 NC2 DL RxQual Threshold


Full Name NC2 DL RxQual Threshold

Abbreviation DLRxQualThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 downlink quality decision threshold.


Description It is used in downlink-quality-based reselection algorithms.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 4

Default Value This parameter ensures that the reselection can be implemented
Configuration Reason accurately and efficiently.

2-1563

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If the parameter value mapped from the downlink MEAN_BEP of the


serving cell is larger than the threshold, the Network Controlled Cell
Reselection (NCCR) decision based on downlink quality is triggered.
The corresponding relationship between MEAN_BEP and the value
range is described as follows:
MEAN_BEP Parameter Value
0-3 7
Configuration Rule and 4-7 6
Adjustment Suggestion 8-11 5
12-15 4
16-19 3
20-23 2
24-27 1
28-31 0
It is recommended to set the threshold to a large value, which helps
avoid unnecessary downlink-quality-based NCCR.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.65 avoid Ping-Pang cell reselection Timer


Full Name avoid Ping-Pang cell reselection Timer

Abbreviation TPingPang

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1564

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is the timer for avoiding ping-pong in cell reselection. After
a mobile phone reselects a cell, it cannot return to the original cell before
Description the timer expires.

Instance Cell

Value Range and Step 0..65535

Unit s

Default Value 100

Default Value This parameter helps avoid ping-pong in cell reselection, and ensures
Configuration Reason good service performance and efficient resource utilization.

If this parameter is set to a large value, it may cause the Network


Controlled Cell Reselection (NCCR) unable to be implemented in a
timely manner, and it also affects performance indexes such as speed
and TBF occupation failure rate.
Configuration Rule and If this parameter is set to a small value, it may cause ping-pong
Adjustment Suggestion network-controlled cell reselection.
If Network Controlled Cell Reselection (NCCR) is enabled, it is
recommended to set this parameter to 10 s.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.66 NC2 Reselection hysteresis Threshold


Full Name NC2 Reselection hysteresis Threshold

2-1565

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation NC2ResHys

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 reselection hysteresis level. It helps


Description reselect a better cell.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value This parameter ensures that the reselection based on better neighbor
Configuration Reason cell can be implemented accurately and efficiently.

The priority of NCCR based on better neighbor cell is higher than


that of NCCR based on level. If the serving cell level is between the
NC2ResThr parameter value and the DLRxLevThr parameter value, and
if the result of subtracting the service cell C2 from the neighbor cell C2
is larger than the NC2ResHys parameter value, the NCCR based on
Configuration Rule and
better neighbor cell can be triggered.
Adjustment Suggestion
If this parameter is set to a large value, it helps avoid ping-pong NCCR,
but it may cause NCCR based on better neighbor cell unable to be
implemented in a timely manner.
If this parameter is set to a small value, it helps implement NCCR based
on better neighbor cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1566

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.67 NC2 reselection DL RxLevel Threshold


Full Name NC2 reselection DL RxLevel Threshold

Abbreviation NC2ResThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter represents the NC2 reselection downlink level threshold.


Description It helps reselect a better neighbor cell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value This parameter ensures that the reselection based on better neighbor
Configuration Reason cell can be implemented accurately and efficiently.

The priority of NCCR based on better neighbor cell is higher than


that of NCCR based on level. If the serving cell level is between the
NC2ResThr parameter value and the DLRxLevThr parameter value, and
if the result of subtracting the service cell C2 from the neighbor cell C2
is larger than the NC2ResHys parameter value, the NCCR based on
Configuration Rule and
better neighbor cell can be triggered.
Adjustment Suggestion
If this parameter is set to a large value, the range of NCCR based on
better neighbor cell is enlarged, which helps trigger NCCR towards cells
with better C2.
If this parameter is set to a small value, it helps limit the number of
unnecessary cells when the C2 value is large.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

2-1567

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.37.68 NC2 Distance Windows


Full Name NC2 Distance Windows

Abbreviation NC2DistanceWindow

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Sets the window size of NC2 based on TA.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 4

Default Value
Configuration Reason None

If the parameter value is set higher, more measurement reports are


Configuration Rule and needed for an average distance calculation, which avoids the impact of
Adjustment Suggestion signal influatuation. However, a high parameter value is likely to delay
the calculation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1568

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.37.69 Downlink RxQual N Value


Full Name Downlink RxQual N Value

Abbreviation DLRxQualN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers downlink quality reselection when P of N measured


Description downlink quality meets the downlink quality threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.70 Downlink RxQual Criteria


Full Name Downlink RxQual Criteria

2-1569

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation NC2RxQualDLCriteria

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on downlink quality criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.71 Downlink RxLev P Value


Full Name Downlink RxLev P Value

Abbreviation DLRxLevP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1570

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The system triggers uplink level reselection when P of N measured downlink


Description levels meets the downlink level threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.72 Downlink RxLev N Value


Full Name Downlink RxLev N Value

Abbreviation DLRxLevN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers uplink level reselection when P of N measured downlink


Description levels meets the downlink level threshold.

Instance Cell

2-1571

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.73 Downlink RxLev Criteria


Full Name Downlink RxLev Criteria

Abbreviation NC2RxlevDLCriteria

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on downlink level criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

2-1572

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.74 Distance P Value


Full Name Distance P Value

Abbreviation DistanceP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers distance reselection when P of N measured distances


Description meets the distance threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

2-1573

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.75 Distance N Value


Full Name Distance N Value

Abbreviation DistanceN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers distance reselection when P of N measured distances


Description meets the distance threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

2-1574

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.76 Distance Criteria


Full Name Distance Criteria

Abbreviation DistanceCriteria

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on distance criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1575

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.77 Cell reselection by traffic


Full Name cell reselection by traffic

Abbreviation CellReselByTraffic

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Cell reselection by traffic

Instance Cell

Value Range and Step 0: Not Support 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1576

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.78 Cell change failure penalty time


Full Name Cell change failure penalty time

Abbreviation TCellChangeFailPenal

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

When cell reselection fails, a penalty is made for the whole target cell with
the failure cause of cell congestion. During the penalty period, MSs are
forbidden to use the target cell. If the failure is not caused by cell congestion,
a neighbor cell penalty is made during the penalty period according to the
Description failure times and penalty offset.

Instance Cell

Value Range and Step 1..100

Unit s

Default Value 5

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1577

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.79 Cell change failure penalty level offset


Full Name cell change failure penalty level offset

Abbreviation PenalLevOffset

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

When the target cell fails to be reselected and makes another attempt, the
penalty offset "PenalLevOffset" is deducted during PBGT calculation if the
cell priorities are the same. If the cell is still ranked first, another attempt
is made. When an offset penalty is made for the target cell and meanwhile
the "NTCellChangeFailPenal" counter is enabled and set to 1, the counter
increases by 1 and the offset level increases by the value of "PenalLevOff-
set" in case of another failure. When the failure times reach the maximum
value 3 but the cell is in the penalty period ("TcellChangeFailPenal"), the
Description cell is filtered and no attempt is made to the cell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 15

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1578

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.80 Uplink RxQual P Value


Full Name Uplink RxQual P Value

Abbreviation ULRxQualP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers uplink quality reselection when P of N measured uplink


Description quality meets the uplink quality threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1579

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.81 Uplink RxQual N Value


Full Name Uplink RxQual N Value

Abbreviation ULRxQualN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers uplink quality reselection when P of N measured uplink


Description quality meets the uplink quality threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

2-1580

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.82 Uplink RxQual Criteria


Full Name Uplink RxQual Criteria

Abbreviation NC2RxQualULCriteria

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on uplink quality criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1581

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.37.83 Uplink RxLev P Value


Full Name Uplink RxLev P Value

Abbreviation ULRxLevP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers uplink level reselection when P of N measured uplink


Description levels meets the uplink level threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.84 Uplink RxLev N Value


Full Name Uplink RxLev N Value

2-1582

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation ULRxLevN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers uplink level reselection when P of N measured uplink


Description levels meets the uplink level threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.85 Uplink RxLev Criteria


Full Name Uplink RxLev Criteria

Abbreviation NC2RxLevULCriteria

Managed Object NC2 Configuration

2-1583

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on uplink level criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.86 Traffic cell change threshold


Full Name Traffic cell change threshold

Abbreviation TrafficThr

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1584

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

When the traffic reselection switch of the serving cell is on and its load
reaches the value of this parameter, the system triggers reselection from
Description this cell to other cells.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason The load of a serving cell should not be too high.

Configuration Rule and The load of a serving cell can be controlled through this parameter. To
Adjustment Suggestion make the load of this cell not too high, decrease the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.87 PBGT P Value


Full Name PBGT P Value

Abbreviation PBGTP

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers PBGT reselection when P of continuous N measured


Description PBGT values meets the PBGT threshold.

Instance Cell

2-1585

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.88 PBGT N Value


Full Name PBGT N Value

Abbreviation PBGTN

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

The system triggers PBGT reselection when P of continuous N measured


Description PBGT values meets the PBGT threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

2-1586

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 7

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.89 PBGT Criteria


Full Name PBGT Criteria

Abbreviation PBGTCriteria

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Description Reselection based on PBGT criteria

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

2-1587

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.90 Invalid reassign time


Full Name invalid reassign time

Abbreviation TInvalidIReassign

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

Penalty for intra-cell resource changes caused by interference: When in-


tra-cell interference occurs for the first time after timeslots are reassigned,
the MS enables the TInvalidIReassign timer. If timeslot reassignment reoc-
curs before the timer times out, it indicates that the previous timeslot reas-
signment does not improve the interference. The NInvalidIReassign timer
increases by 1 and meanwhile the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs after the timer times out, it indicates that
the previous time reassignment is valid. The NInvalidIReassign timer is
reset to 0 and meanwhile the MS enables the TInvalidIReassign timer. If
the NInvalidIReassign timer reaches the value of "NMaxInvalidIReassign",
it is unnecessary to improve interference by timeslot reassignment. In this
Description case, cell reselection should be made.

Instance Cell

2-1588

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0..31

Unit s

Default Value 3

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.91 Invalid reassign maximum times


Full Name invalid reassign maximum times

Abbreviation NMaxInvalidIReassign

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

2-1589

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Penalty for intra-cell resource changes caused by interference: When in-


tra-cell interference occurs for the first time after timeslots are reassigned,
the MS enables the TInvalidIReassign timer. If timeslot reassignment reoc-
curs before the timer times out, it indicates that the previous timeslot reas-
signment does not improve the interference. The NInvalidIReassign timer
increases by 1 and meanwhile the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs after the timer times out, it indicates that
the previous time reassignment is valid. The NInvalidIReassign timer is
reset to 0 and meanwhile the MS enables the TInvalidIReassign timer. If
the NInvalidIReassign timer reaches the value of "NMaxInvalidIReassign",
it is unnecessary to improve interference by timeslot reassignment. In this
Description case, cell reselection should be made.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 3

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Set as required

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.92 Indication for sending PNCD before NC2 PCCO


Full Name Indication for sending PNCD before NC2 PCCO

2-1590

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation NC2PNCDSendInd

Managed Object NC2 Configuration

3GPP Name N/A

3GPP Reference N/A

In NC2 mode, this parameter determines whether to send a system mes-


sage of the target cell to the MS before sending the "Packet cell change
Description order" message.

Instance Cell

Value Range and Step 0:No 1:Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason Keep it the same as that in the previous version.

Configuration Rule and In NC2 mode, this parameter can be modified to shorten the access rate
Adjustment Suggestion in new cells.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.37.93 Downlink RxQual P Value


Full Name Downlink RxQual P Value

Abbreviation DLRxQualP

Managed Object NC2 Configuration

2-1591

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

The system triggers downlink quality reselection when P of N measured


Description downlink quality meets the downlink quality threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

The smaller the value, the more timely the measurement report
Configuration Rule and
determination, the more sensitive the reselection and the greater the
Adjustment Suggestion
impact brought by instantaneous fluctuation.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->NC2 Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.38 DTM Configuration(GDTM)


2.38.1 DTM Configuration ID
Full Name DTM Configuration ID

Abbreviation GDTM

Managed Object DTM Configuration

2-1592

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description DTM Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->DTM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.38.2 DTM support


Full Name DTM support

Abbreviation DTMSupport

Managed Object DTM Configuration

3GPP Name N/A

3GPP Reference N/A

2-1593

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is broadcast to the MS in GPRS Cell options of SI13 and


PSI13, to indicate whether the cell supports the dual transfer mode (DTM).
Under this function, the A-category MS is allowed to initialize the packet
Description requirement process under the dedicated mode.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

If CN supports Common ID, whether to enable


Configuration Rule and the DTM function is dependent upon users' requirement of the current
Adjustment Suggestion network. The function supports concurrent services and users' felling
can be improved.

Change Mode Offline

Related features ZGO-01-03-005 Dual Transfer Mode

Related Parameters GttpLapdmNum

GttpLapdmNum is valid after the DTMSupport


Relationship
function is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->DTM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.38.3 Support enhanced DTM capability


Full Name Support enhanced DTM capability

Abbreviation DTMEnhanceCapa

Managed Object DTM Configuration

3GPP Name None

2-1594

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

This parameter indicates whether the cell supports DTM enhanced capa-
bility. If yes, then:1, The MS enters the DTM transmission state without
releasing PS when it receives a paging request from CS. 2, The MS en-
ters the Packet Transfer state without releasing PS resources when CS
Description is released under DTM.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value These functions are not provided in the current


Configuration Reason version.

It is required to configure this parameter


Configuration Rule and
according to the DTM settings and the functions supported by the current
Adjustment Suggestion
version.

Change Mode Offline

Related features N/A

Related Parameters DTMEnhanceCap

This parameter is valid when the Support Enhanced DTM parameter of


Relationship
BSC-level is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->DTM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.38.4 Max number of GTTP lapdm frame


Full Name Max number of GTTP lapdm frame

Abbreviation gttpLapdmNum

Managed Object DTM Configuration

2-1595

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name MAX_LAPDm

3GPP Reference 3GPP TS 44.018

This parameter indicates the maximum number of GTTP Lapdm frames.


It specifies the maximum number of Lapdm frames of GPRS signalling
message transmitted on the main DCCH.If MS and the network side sup-
port DYM, MS is in the dedicated mode, and MS or the network side needs
to transparently transmit the upper layer information at the Um interface,
use GPRS transparent procedure on the main DCCH when: 1, the infor-
mation to transmit is GPRS signalling; 2, length of the GTTP message is
Description smaller than the setting value of this parameter.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason defaut value 3 is enough for general GMM signalling transfer

Configuration Rule and the higher the value, the longer the GPRS signalling is beared and the
Adjustment Suggestion more the LAPDm is effected.So the value should not be set too much.

Change Mode Offline

Related features ZGO-01-03-005 Dual Transfer Mode

Related Parameters DTMSupport

GttpLapdmNum is valid after the DTMSupport


Relationship
function is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->DTM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1596

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39 PS Power Control(GPsPowerControl)


2.39.1 PS Power Control ID
Full Name PS Power Control ID

Abbreviation GPsPowerControl

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

Description PS Power Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.2 Uplink power control strategy


Full Name Uplink power control strategy

2-1597

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation ulPwCtrl

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the uplink power control policy of GPRS., in-
cluding the following four modes: No control, open-loop control, close-
Description loop control, and control based on quality.

Instance Cell

0: No control
1: Open-loop control
2: Close-loop control
Value Range and Step 3: Control based on quality

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Currently, only the open-loop control is supported.


Configuration Rule and This parameter value can be set to 1 when the uplink open-loop power
Adjustment Suggestion control should be enabled on site.If this function is enabled, uplink
intra-network interference can be reduced.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1598

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.3 Downlink power control strategy


Full Name Downlink power control strategy

Abbreviation dlPwCtrl

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the downlink power control policy of GPRS.,


including the following four modes: No control, open-loop control, close-
Description loop control, and control based on quality.

Instance Cell

0: No control
1: Open-loop control
2: Close-loop control
Value Range and Step 3: Control based on quality

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1599

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.4 Expected signal intensity of MS


Full Name Expected signal intensity of MS

Abbreviation ss_bts

Managed Object PS Power Control

3GPP Name SSb

3GPP Reference 3GPP TS 45.008

This parameter is used for the uplink open loop power control.
SSb = P - L = T0 - TCH - PBTS - 48
where
PBTS = BTS maximum output power
P = MS output power
L = path loss
TCH is an MS and channel specific power control parameter, sent to the
MS in an RLC control message .
T0 = 39 dBm for GSM 400, GSM 700, GSM 850 and GSM900
Description = 36 dBm for DCS1 800 and PCS 1900

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 40

If the signal strength received by the MS is


Default Value
close to -70dBm, it ensures PS services are performed in a normal
Configuration Reason
case.

If the transmitting power of the MS should


Configuration Rule and
be reduced, and interference which is caused by PS services should
Adjustment Suggestion
be alleviated, reduce the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1600

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.5 Downlink Power Control Mode


Full Name Downlink Power Control Mode

Abbreviation pwCtrlMode

Managed Object PS Power Control

3GPP Name BTS_PWR_CTRL_MODE

3GPP Reference 3GPP TS 45.008

This parameter determines the BTS downlink power control mode. BTS
has two power control modes: A and B. Under mode A, The power of
each radio block on the channel is calculated in accordance with the cor-
responding MS to which the block beongs. Under mode B, the radio block
that belogs to different MS on the channel uses the same transmission
Description power.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1601

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.6 Power Control Level


Full Name Power Control Level

Abbreviation pwCtrlLev

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the power control precision of GPRS, describ-


ing the nominal output power and power control precision (dB) sent by the
MS under each power control level.Currently, this parameter is not used
Description and does not need to be adjusted.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Configuration Rule and Currently, this parameter is not used and need
Adjustment Suggestion not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

2-1602

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.39.7 Power descending of PDCH to BCCH in a mode


Full Name Power descending of PDCH to BCCH in a mode

Abbreviation p0

Managed Object PS Power Control

3GPP Name P0

3GPP Reference 3GPP TS 44.060

This parameter is an optional downlink power control parameter, included


in the PACKET UPLINK ASSIGNMENT and PACKET DOWNPLINK
ASSIGNMENT messages. If P0 is present, then downlink power control
is used. Otherwise, downlink power control is not used. Under the
packet transmission mode, P0 value is not allowed to be changed
unless rthe reassignment or a new assignment is established, and the
Description assignment does not include any PDCHsassigned previously.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 0

Default Value the parameter is a feature parameter, default value is 0-not apply power
Configuration Reason control.

The parameter is used when downlink power control


Configuration Rule and is enabled. The higher the P0 value, the lower the BTS transmission
Adjustment Suggestion power; the lower the P0 value, the higher the BTS transmission power.
Set it based on the actual condition.

Change Mode Offline

Related features ZGO-03-02-008 EGPRS on BCCH-TRX Configurable

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1603

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.8 Power control parameter


Full Name Power control parameter

Abbreviation Alpha

Managed Object PS Power Control

3GPP Name ALPHA

3GPP Reference 3GPP TS 44.060

This parameter is used at MS side. It is one of the global power control


and GPRS power control parameters, and is broadcast to an MS in the
PSI1, PSI13 and SI13 messages. This parameter determines the MS
Description transmission power control parameter Alpha ().

Instance Cell

Value Range and Step 0..10

Unit N/A

Default Value 6

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

Configuration Rule and Lower the value of this power control parameter
Adjustment Suggestion to decrease the MS transmission power reliance on the downlink level.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

2-1604

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.39.9 Filter period in the packet idle mode


Full Name Filter period in the packet idle mode

Abbreviation T_AVG_W

Managed Object PS Power Control

3GPP Name T_AVG_W

3GPP Reference 3GPP TS 44.060

This parameter is used at MS side. It is one of the global power control and
GPRS power control parameters, and is broadcast to an MS in the PSI1,
PSI13 and SI13 messages. This parameter indicates the filter period of a
Description signal intensity for power control in packet idle mode.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

This parameter is used when an MS surveys the downlink signal intensity


in packet idle mode, and calculates the C value. The formula is: Cn =
Configuration Rule and
(1-a) Cn-1 + a Cblock, n, , a = 1/MIN(n, MAX(5, TAVG_W*NDRX))..
Adjustment Suggestion
For the details, see 45008 10.2.3.1.1. Currently this parameter is not
supported and it is 0 by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1605

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.10 Filter period in packet transmission mode


Full Name Filter period in packet transmission mode

Abbreviation T_AVG_T

Managed Object PS Power Control

3GPP Name T_AVG_T

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is one of the global power con-
trol and GPRS power control parameters, and is broadcast to an MS in
the PSI1, PSI13 and SI13 messages. This parameter indicates the filter
period of the signal intensity for power control in the packet transmission
Description mode.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 0

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

This parameter is used when an MS surveys the downlink signal


intensity in packet transmission mode, and calculates the C value. The
Configuration Rule and
formula is: Cn = (1-b) Cn-1 + b SS n, , b = 1/(6*TAVG_T).. For the
Adjustment Suggestion
details, see 45008 10.2.3.1.2. Currently this parameter is not supported
and it is 0 by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1606

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.11 Power control measurement channel


Full Name Power control measurement channel

Abbreviation PcMeasChan

Managed Object PS Power Control

3GPP Name PC_MEAS_CHAN

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is one of the global power control
and GPRS power control parameters, and is broadcast to an MS in the
PSI1, PSI13 and SI13 messages. This parameter indicates the position
Description where the downlink power strength is surveyed for uplink power control.

Instance Cell

0: BCCH
Value Range and Step 1: PDCH

Unit N/A

Default Value 0

Default Value
Configuration Reason Configuration based on actual demand

Configuration Rule and Set it with the default value. MS surveys the
Adjustment Suggestion BCCH uplink power.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1607

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.12 Filter constant of power control


Full Name Filter constant of power control

Abbreviation N_AVG_I

Managed Object PS Power Control

3GPP Name N_AVG_I

3GPP Reference 3GPP TS 44.060

This parameter is used at the MS side. It is one of the global power control
and GPRS power control parameters, and is broadcast to an MS in the
PSI1, PSI13 and SI13 messages. This parameter is a filter constant used
Description to optimize the interference signal intensity in power control.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 0

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

This parameter is used at MS side. It is a


Configuration Rule and
factor used to calculate the downlink signal intensity. The default
Adjustment Suggestion
value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1608

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.13 Max power reduction of CS1


Full Name Max power reduction of CS1

Abbreviation CodePwrDecLmt1

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is CS1.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 26

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1609

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.14 Max power reduction of CS2


Full Name Max power reduction of CS2

Abbreviation CodePwrDecLmt2

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is CS2.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 20

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

2-1610

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail New

2.39.15 Max power reduction of CS3


Full Name Max power reduction of CS3

Abbreviation CodePwrDecLmt3

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is CS3.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 16

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1611

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.16 Max power reduction of CS4


Full Name Max power reduction of CS4

Abbreviation CodePwrDecLmt4

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is CS4.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 12

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.17 Max power reduction of MCS1


Full Name Max power reduction of MCS1

2-1612

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation CodePwrDecLmt5

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS1.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 26

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.18 Max power reduction of MCS2


Full Name Max power reduction of MCS2

Abbreviation CodePwrDecLmt6

Managed Object PS Power Control

2-1613

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS2.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 24

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.19 Max power reduction of MCS3


Full Name Max power reduction of MCS3

Abbreviation CodePwrDecLmt7

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

2-1614

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS3.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 22

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.20 Max power reduction of MCS4


Full Name Max power reduction of MCS4

Abbreviation CodePwrDecLmt8

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS4.

Instance Cell

2-1615

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..40

Unit N/A

Default Value 20

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.21 Max power reduction of MCS5


Full Name Max power reduction of MCS5

Abbreviation CodePwrDecLmt9

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS5.

Instance Cell

Value Range and Step 0..40

Unit N/A

2-1616

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 18

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.22 Max power reduction of MCS6


Full Name Max power reduction of MCS6

Abbreviation CodePwrDecLmt10

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS6.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 16

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

2-1617

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.23 Max power reduction of MCS7


Full Name Max power reduction of MCS7

Abbreviation CodePwrDecLmt11

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS7.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 14

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

2-1618

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.24 Max power reduction of MCS8


Full Name Max power reduction of MCS8

Abbreviation CodePwrDecLmt12

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS8.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 12

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

2-1619

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.25 Max power reduction of MCS9


Full Name Max power reduction of MCS9

Abbreviation CodePwrDecLmt13

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the maximum decreased power during power


Description control when the service encoding mode is MCS9.

Instance Cell

Value Range and Step 0..40

Unit N/A

Default Value 10

Default Value The maximum signal strength supported by the


Configuration Reason encoding mode must be taken into consideration.

If this parameter is configured too large,


Configuration Rule and
the QoS will be affected. If this parameter is configured too smaller,
Adjustment Suggestion
the range for power control adjustment will be restricted.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

2-1620

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.26 Window of averaging uplink signal


Full Name Window of averaging uplink signal

Abbreviation ulLevPSPwrMeaWnd

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the number of samples used for average cal-
culation on the uplink signal strength measured during uplink power con-
Description trol judgment.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 10

Default Value Considering that uplink measurement report is comparatively submitted


Configuration Reason quickly, each radio block can be reported once.

A greater value indicates a better performance of filter burst


Configuration Rule and measurement report but reduced power control decision sensitivity.
Adjustment Suggestion A lower value indicates more sensitive power control decision but
decreased accuracy.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1621

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.27 Window of averaging downlink signal


Full Name Window of averaging downlink signal

Abbreviation dlLevPSPwrMeaWnd

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used for average calcu-
lation on the downlink signal strength measured during downlink power
Description control judgement.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value Considering that downlink measurement report is comparatively


Configuration Reason submitted slowly, multiple radio blocks can be reported once.

A greater value indicates a better performance of filter burst


Configuration Rule and measurement report but reduced power control decision sensitivity.
Adjustment Suggestion A lower value indicates more sensitive power control decision but
decreased accuracy.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1622

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.28 Window of averaging uplink quality


Full Name Window of averaging uplink quality

Abbreviation ulQuaPSPwrMeaWnd

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the number of samples used for average cal-
culation on the uplink signal quality measured during uplink power control
Description judgment.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 10

Default Value Considering that uplink measurement report is comparatively submitted


Configuration Reason quickly, each radio block can be reported once.

A greater value indicates a better performance of filter burst


Configuration Rule and measurement report but reduced power control decision sensitivity.
Adjustment Suggestion A lower value indicates more sensitive power control decision but
decreased accuracy.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1623

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.29 Window of averaging downlink quality


Full Name Window of averaging downlink quality

Abbreviation dlQuaPSPwrMeaWnd

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the number of samples used for average cal-
culation on the downlink signal quality measured during downlink power
Description control judgment.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value Considering that downlink measurement report is comparatively


Configuration Reason submitted slowly, multiple radio blocks can be reported once.

A greater value indicates a better performance of filter burst


Configuration Rule and measurement report but reduced power control decision sensitivity.
Adjustment Suggestion A lower value indicates more sensitive power control decision but
decreased accuracy.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1624

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.39.30 Threshold of uplink signal for increasing power


Full Name Threshold of uplink signal for increasing power

Abbreviation ulIncPSPwrThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are lower than this
threshold during uplink power control judgment, the system considers
Description this case as low level.

Instance Cell

20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
Value Range and Step 30: -80

Unit dBm

Default Value 22

Default Value The signal strength for normal operation of


Configuration Reason the PS service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low level and thus the
Configuration Rule and higher the possibility of power increase during power judgment. The
Adjustment Suggestion smaller the value of this parameter, the lower the possibility of
being considered as low level and thus the lower the possibility of
power increase during power judgment.

2-1625

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.31 Threshold of downlink signal for increasing power


Full Name Threshold of downlink signal for increasing power

Abbreviation dlIncPSPwrThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are lower than this
threshold during downlink power control judgment, the system considers
Description this case as low level.

Instance Cell

20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
Value Range and Step 30: -80

2-1626

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit dBm

Default Value 25

Default Value The signal strength for normal operation of


Configuration Reason the PS service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low level and thus the
Configuration Rule and higher the possibility of power increase during power judgment. The
Adjustment Suggestion smaller the value of this parameter, the lower the possibility of
being considered as low level and thus the lower the possibility of
power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.32 Threshold of uplink signal for decreasing power


Full Name Threshold of uplink signal for decreasing power

Abbreviation ulDecPSPwrThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are higher than this
threshold during uplink power control judgment, the system considers this
Description case as high level.

Instance Cell

2-1627

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
Value Range and Step 45: -65

Unit dBm

Default Value 36

Default Value The signal strength for normal operation of


Configuration Reason the PS service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high level and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high level and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1628

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.33 Threshold of downlink signal for decreasing power


Full Name Threshold of downlink signal for decreasing power

Abbreviation dlDecPSPwrThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are higher than this
threshold during downlink power control judgment, the system considers
Description this case as high level.

Instance Cell

32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
Value Range and Step 45: -65

Unit dBm

Default Value 40

Default Value The signal strength for normal operation of


Configuration Reason the PS service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high level and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high level and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

2-1629

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.34 Threshold of uplink MEAN_BEP for increasing power in


GPRS
Full Name Threshold of uplink MEAN_BEP for increasing power in GPRS

Abbreviation ulIncMeanBepGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink MEAN_BEP averages are lower than this thresh-
old during uplink power control judgment, the system considers this case
Description as low quality.

Instance Cell

Value Range and Step 12..24

Unit N/A

Default Value 18

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

2-1630

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS


Full Name Threshold of uplink CV_BEP for increasing power in GPRS

Abbreviation ulIncCvBepGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink CV_BEP averages are lower than this threshold
during uplink power control judgment, the system considers this case as
Description low quality. This parameter is currently not available.

Instance Cell

Value Range and Step 2..5

Unit N/A

Default Value 4

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

2-1631

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.36 Threshold of downlink quality for increasing power in GPRS


Full Name Threshold of downlink quality for increasing power in GPRS

Abbreviation dlIncQuaGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 2..5

Unit N/A

Default Value 3

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

2-1632

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.37 Threshold of uplink MEAN_BEP for decreasing power in


GPRS
Full Name Threshold of uplink MEAN_BEP for decreasing power in GPRS

Abbreviation ulDecMeanBepGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink MEAN_BEP averages are higher than this thresh-
old during uplink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 27..30

Unit N/A

Default Value 29

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

2-1633

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS


Full Name Threshold of uplink CV_BEP for decreasing power in GPRS

Abbreviation ulDecCvBepGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink CV_BEP averages are higher than this threshold
and P out of N uplink MEAN_BEP averages are higher than the corre-
sponding MEAN_BEP threshold during uplink power control judgment of
the GPRS service, the system considers this case as high quality. This
Description parameter is currently not available.

Instance Cell

Value Range and Step 5..6

Unit N/A

Default Value 6

2-1634

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.39 Threshold of downlink quality for decreasing power in


GPRS
Full Name Threshold of downlink quality for decreasing power in GPRS

Abbreviation dlDecQuaGprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 1..2

2-1635

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 1

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.40 Threshold of uplink MEAN_BEP for increasing power in


EDGE
Full Name Threshold of uplink MEAN_BEP for increasing power in EDGE

Abbreviation ulIncMeanBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink MEAN_BEP averages are lower than this thresh-
old during uplink power control judgment of the EDGE service, the system
Description considers this case as low quality.

2-1636

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 12..24

Unit N/A

Default Value 18

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE


Full Name Threshold of uplink CV_BEP for increasing power in EDGE

Abbreviation ulIncCvBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

2-1637

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When P out of N uplink CV_BEP averages are lower than this threshold
during uplink power control judgment of the EDGE service, the system
considers this case as low quality. This parameter is currently not avail-
Description able.

Instance Cell

Value Range and Step 2..5

Unit N/A

Default Value 4

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.42 Threshold of downlink MEAN_BEP for increasing power in


EDGE
Full Name Threshold of downlink MEAN_BEP for increasing power in EDGE

Abbreviation dlIncMeanBepEgprsThr

Managed Object PS Power Control

2-1638

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the EDGE service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 12..24

Unit N/A

Default Value 18

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.43 Threshold of downlink CV_BEP for increasing power in


EDGE
Full Name Threshold of downlink CV_BEP for increasing power in EDGE

2-1639

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation dlIncCvBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink CV_BEP averages are lower than this threshold
during downlink power control judgment of the EDGE service, the system
considers this case as high quality. This parameter is currently not avail-
Description able.

Instance Cell

Value Range and Step 2..5

Unit N/A

Default Value 4

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The larger the value of this parameter, the


higher the possibility of being considered as low quality and thus
Configuration Rule and the higher the possibility of power increase during power judgment.
Adjustment Suggestion The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1640

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.44 Threshold of uplink MEAN_BEP for decreasing power in


EDGE
Full Name Threshold of uplink MEAN_BEP for decreasing power in EDGE

Abbreviation ulDecMeanBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink MEAN_BEP averages are higher than this thresh-
old during uplink power control judgment of the EDGE service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 27..30

Unit N/A

Default Value 29

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1641

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE


Full Name Threshold of uplink CV_BEP for decreasing power in EDGE

Abbreviation ulDecCvBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink CV_BEP averages are higher than this threshold
and P out of N uplink MEAN_BEP averages are higher than the corre-
sponding MEAN_BEP threshold during uplink power control judgment of
the EDGE service, the system considers this case as high quality. This
Description parameter is currently not available.

Instance Cell

Value Range and Step 5..6

Unit N/A

Default Value 6

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1642

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.46 Threshold of downlink MEAN_BEP for decreasing power in


EDGE
Full Name Threshold of downlink MEAN_BEP for decreasing power in EDGE

Abbreviation dlDecMeanBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink MEAN_BEP averages are higher than this


threshold during downlink power control judgment of the EDGE service,
Description the system considers this case as high quality.

Instance Cell

Value Range and Step 27..30

Unit N/A

Default Value 29

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1643

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.47 Threshold of downlink CV_BEP for decreasing power in


EDGE
Full Name Threshold of downlink CV_BEP for decreasing power in EDGE

Abbreviation dlDecCvBepEgprsThr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink CV_BEP averages are higher than this thresh-
old and P out of N downlink MEAN_BEP averages are higher than the
corresponding MEAN_BEP threshold during downlink power control judg-
ment of the EDGE service, the system considers this case as high quality.
Description This parameter is currently not available.

Instance Cell

Value Range and Step 5..6

Unit N/A

Default Value 6

Default Value The quality for normal operation of the PS


Configuration Reason service must be taken into consideration.

The smaller the value of this parameter, the


higher the possibility of being considered as high quality and thus
Configuration Rule and the higher the possibility of power decrease during power judgment.
Adjustment Suggestion The larger the value of this parameter, the lower the possibility
of being considered as high quality and thus the lower the possibility
of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

2-1644

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail New

2.39.48 N of uplink signal for increasing power


Full Name N of uplink signal for increasing power

Abbreviation ulIncPSPwrLevN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are lower than this
threshold during uplink power control judgment, the system considers
Description this case as low level.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1645

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.49 N of downlink signal for increasing power


Full Name N of downlink signal for increasing power

Abbreviation dlIncPSPwrLevN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are lower than this
threshold during downlink power control judgment, the system considers
Description this case as low level.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1646

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.50 N of uplink signal for decreasing power


Full Name N of uplink signal for decreasing power

Abbreviation ulDecPSPwrLevN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are higher than this
threshold during uplink power control judgment, the system considers this
Description case as high level.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1647

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.51 N of downlink signal for decreasing power


Full Name N of downlink signal for decreasing power

Abbreviation dlIDecPSPwrLevN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are higher than this
threshold during downlink power control judgment, the system considers
Description this case as high level.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1648

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.52 N of uplink quality for increasing power in GPRS


Full Name N of uplink quality for increasing power in GPRS

Abbreviation ulIncPSPwrGprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are lower than this threshold
during uplink power control judgment of the GPRS service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1649

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.53 N of downlink quality for increasing power in GPRS


Full Name N of downlink quality for increasing power in GPRS

Abbreviation dlIncPSPwrGprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

2-1650

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.54 N of uplink quality for decreasing power in GPRS


Full Name N of uplink quality for decreasing power in GPRS

Abbreviation ulDecPSPwrGprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are higher than this threshold
during uplink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

2-1651

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.55 N of downlink quality for decreasing power in GPRS


Full Name N of downlink quality for decreasing power in GPRS

Abbreviation dlIDecPSPwrGprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

2-1652

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.56 N of uplink quality for increasing power in EDGE


Full Name N of uplink quality for increasing power in EDGE

Abbreviation ulIncPSPwrEgprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are lower than this threshold
during uplink power control judgment of the EDGE service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

Change Mode Offline

2-1653

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.57 N of downlink quality for increasing power in EDGE


Full Name N of downlink quality for increasing power in EDGE

Abbreviation dlIncPSPwrEgprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the EDGE service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.

2-1654

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.58 N of uplink quality for decreasing power in EDGE


Full Name N of uplink quality for decreasing power in EDGE

Abbreviation ulDecPSPwrEgprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are higher than this threshold
during uplink power control judgment of the EDGE service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 30

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

2-1655

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.59 N of downlink quality for decreasing power in EDGE


Full Name N of downlink quality for decreasing power in EDGE

Abbreviation dlIDecPSPwrEgprsQuaN

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the EDGE service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 4

2-1656

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.60 P of uplink signal for increasing power


Full Name P of uplink signal for increasing power

Abbreviation ulIncPSPwrLevP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are lower than this
threshold during uplink power control judgment, the system considers
Description this case as low level.

Instance Cell

Value Range and Step 5..50

Unit N/A

2-1657

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.61 P of downlink signal for increasing power


Full Name P of downlink signal for increasing power

Abbreviation dlIncPSPwrLevP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are lower than this
threshold during downlink power control judgment, the system considers
Description this case as low level.

Instance Cell

Value Range and Step 2..15

2-1658

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.62 P of uplink signal for decreasing power


Full Name P of uplink signal for decreasing power

Abbreviation ulDecPSPwrLevP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink signal strength averages are higher than this
threshold during uplink power control judgment, the system considers this
Description case as high level.

Instance Cell

2-1659

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 5..50

Unit N/A

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.63 P of downlink signal for decreasing power


Full Name P of downlink signal for decreasing power

Abbreviation dlIDecPSPwrLevP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink signal strength averages are higher than this
threshold during downlink power control judgment, the system considers
Description this case as high level.

2-1660

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.64 P of uplink quality for increasing power in GPRS


Full Name P of uplink quality for increasing power in GPRS

Abbreviation ulIncPSPwrGprsQuaP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

2-1661

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When P out of N uplink quality averages are lower than this threshold
during uplink power control judgment of the GPRS service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.65 P of downlink quality for increasing power in GPRS


Full Name P of downlink quality for increasing power in GPRS

Abbreviation dlIncPSPwrGprsQuaP

Managed Object PS Power Control

3GPP Name N/A

2-1662

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.66 P of uplink quality for decreasing power in GPRS


Full Name P of uplink quality for decreasing power in GPRS

Abbreviation ulDecPSPwrGprsQuaP

Managed Object PS Power Control

2-1663

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are higher than this threshold
during uplink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.67 P of downlink quality for decreasing power in GPRS


Full Name P of downlink quality for decreasing power in GPRS

Abbreviation dlIDecPSPwrGprsQuaP

2-1664

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the GPRS service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.68 P of uplink quality for increasing power in EDGE


Full Name P of uplink quality for increasing power in EDGE

2-1665

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation ulIncPSPwrEgprsQuaP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are lower than this threshold
during uplink power control judgment of the EDGE service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1666

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.69 P of downlink quality for increasing power in EDGE


Full Name P of downlink quality for increasing power in EDGE

Abbreviation dlIncPSPwrEgprsQuaP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are lower than this threshold
during downlink power control judgment of the EDGE service, the system
Description considers this case as low quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The smaller the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power increase during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power increase during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1667

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.70 P of uplink quality for decreasing power in EDGE


Full Name P of uplink quality for decreasing power in EDGE

Abbreviation ulDecPSPwrEgprsQuaP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N uplink quality averages are higher than this threshold
during uplink power control judgment of the EDGE service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 5..50

Unit N/A

Default Value 25

Default Value In the uplink direction, the measurement report


Configuration Reason is reported quickly. Therefore, each radio module can report it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1668

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.71 P of downlink quality for decreasing power in EDGE


Full Name P of downlink quality for decreasing power in EDGE

Abbreviation dlIDecPSPwrEgprsQuaP

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the EDGE service, the system
Description considers this case as high quality.

Instance Cell

Value Range and Step 2..15

Unit N/A

Default Value 3

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


lower the requirements of power judgment and thus the higher the
Configuration Rule and possibility
Adjustment Suggestion of power decrease during power judgment. The smaller the value of
this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power decrease during power judgment.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1669

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.72 Step of uplink power increase


Full Name Step of uplink power increase

Abbreviation ulIncPSPwrChgStep

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the step of power increase during uplink power
Description control.

Instance Cell

Value Range and Step 2, 4

Unit dB

Default Value 2

Default Value The power adjusted each time must not be too
Configuration Reason large, so as to avoid fluctuation.

The smaller the value of this parameter, the


smaller the power increased and thus the smoother the adjustment.
Configuration Rule and
The larger the value of this parameter, the larger the power increased
Adjustment Suggestion
and thus the faster the adjustment. However, this is easy to cause
fluctuation.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1670

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.73 Step of uplink power decrease


Full Name Step of uplink power decrease

Abbreviation ulDecPSPwrChgStep

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the step of power decrease during uplink


Description power control.

Instance Cell

Value Range and Step 2, 4

Unit dB

Default Value 2

Default Value The power adjusted each time must not be too
Configuration Reason large, so as to avoid fluctuation.

The smaller the value of this parameter, the


smaller the power decreased and thus the smoother the adjustment.
Configuration Rule and
The larger the value of this parameter, the larger the power decreased
Adjustment Suggestion
and thus the faster the adjustment. However, this is easy to cause
fluctuation.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1671

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.74 Step of downlink power increase


Full Name Step of downlink power increase

Abbreviation dlIncPSPwrChgStep

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the step of power increase during downlink


Description power control.

Instance Cell

1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
Value Range and Step 8: 4dB

Unit N/A

Default Value 2

Default Value The power adjusted each time must not be too
Configuration Reason large, so as to avoid fluctuation.

The smaller the value of this parameter, the


smaller the power increased and thus the smoother the adjustment.
Configuration Rule and
The larger the value of this parameter, the larger the power increased
Adjustment Suggestion
and thus the faster the adjustment. However, this is easy to cause
fluctuation.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

2-1672

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.75 Step of downlink power decrease


Full Name Step of downlink power decrease

Abbreviation dlDecPSPwrChgStep

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the step of power decrease during downlink


Description power control.

Instance Cell

1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
Value Range and Step 8: 4dB

Unit N/A

Default Value 2

Default Value The power adjusted each time must not be too
Configuration Reason large, so as to avoid fluctuation.

The smaller the value of this parameter, the


smaller the power decreased and thus the smoother the adjustment.
Configuration Rule and
The larger the value of this parameter, the larger the power decreased
Adjustment Suggestion
and thus the faster the adjustment. However, this is easy to cause
fluctuation.

Change Mode Offline

Related features ZGO-04-02-016 PS

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1673

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.76 Mode of downlink closed loop power control


Full Name Mode of downlink closed loop power control

Abbreviation dlClosePwrCtrlMode

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the downlink closed-loop power control


Description uses the rate first or power decrease mode.

Instance Cell

0: velocity prior mode


Value Range and Step 1: power fall mode

Unit N/A

Default Value 0

Default Value Try to lower the impact on speed when decreasing


Configuration Reason power.

In the rate first mode, try to lower the impact


on the speed of subscribers when decreasing power. The higher the
condition for power control judgment, the smaller the decreased power.
Configuration Rule and
In the power decrease mode, try to decrease the transmit power of
Adjustment Suggestion
the BTS. The looser the condition for power control judgment, the
larger the decreased power. In this mode, the speed of subscribers
may be decreased. Select the required mode according to requirements.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1674

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.39.77 lowest CS of enabling downlink power control in GPRS


Full Name lowest CS of enabling downlink power control in GPRS

Abbreviation PSPwrCtrlGprsLowCS

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

In the case of power decrease during downlink PS power control, this pa-
rameter determines the lowest encoding format allowed for power control
Description in GPRS mode.

Instance Cell

1: CS1
2: CS2
3: CS3
Value Range and Step 4: CS4

Unit N/A

Default Value 3

Default Value
Configuration Reason Power must be decreased in good radio environments.

2-1675

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is configured to a small


value, it indicates that downlink power control can be implemented
with the low encoding format in GPRS mode. In this case, the possibility
and scale of power decrease are high, and the speed loss is high.
Configuration Rule and
If this parameter is configured to a large value, it indicates that
Adjustment Suggestion
downlink power control can be implemented with the high encoding
format
in GPRS mode. In this case, the possibility and scale of power decrease
are low, and the speed loss is low.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.39.78 lowest MCS of enabling downlink power control in EDGE


Full Name lowest MCS of enabling downlink power control in EDGE

Abbreviation PSPwrCtrlEgprsLowCS

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

In the case of power decrease during downlink PS power control, this pa-
rameter determines the lowest encoding format allowed for power control
Description in the EDGE mode.

Instance Cell

2-1676

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

1: MCS1
2: MCS2
3: MCS3
4: MCS4
5: MCS5
6: MCS6
7: MCS7
8: MCS8
Value Range and Step 9: MCS9

Unit N/A

Default Value 8

Default Value
Configuration Reason Power must be decreased in good radio environments.

If this parameter is configured to a small


value, it indicates that downlink power control can be implemented
with the low encoding format in EDGE mode. In this case, the possibility
and scale of power decrease are high, and the speed loss is high.
Configuration Rule and
If this parameter is configured to a large value, it indicates that
Adjustment Suggestion
downlink power control can be implemented with the high encoding
format
in EDGE mode. In this case, the possibility and scale of power decrease
are low, and the speed loss is low.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2-1677

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.39.79 try to decrease downlink power


Full Name try to decrease downlink power

Abbreviation TryDecDlPSPwr

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

In the case of power decrease during downlink PS power control, this


parameter determines whether to apply the power control result directly
Description to decease power without considering the auto-adaptive judgment result.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value Decrease much power in the case of downlink


Configuration Reason power decease.

It is required to configure this parameter


Configuration Rule and
according to the requirements on site. To decrease much power, select
Adjustment Suggestion
"Yes". To consider both speed and power decrease, select "No".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2-1678

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.39.80 reduced power of dummy usf in good uplink radio condition


Full Name reduced power of dummy usf in good uplink radio condition

Abbreviation DummyUsfPwr1

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the deteriorated power of the downlink dummy


block with USF when the downlink power control is enabled and the radio
Description quality of the uplink TBF is good.

Instance Cell

0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
Value Range and Step 20: 10

Unit dB

Default Value 8

Default Value Power decrease in normal cases is implemented


Configuration Reason when the uplink signal quality is good.

It is required to configure this parameter


according to the requirements on site. To decrease much power,
Configuration Rule and
configure
Adjustment Suggestion
this parameter to a large value. To consider both speed and power
decrease, configure this parameter to a small value.

2-1679

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.39.81 reduced power of dummy usf in general uplink radio


condition
Full Name reduced power of dummy usf in general uplink radio condition

Abbreviation DummyUsfPwr2

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the deteriorated power of the downlink dummy


block with USF when the downlink power control is enabled and the radio
Description quality of the uplink TBF is normal.

Instance Cell

0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
Value Range and Step
10: 5

2-1680

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10

Unit dB

Default Value 6

Default Value Power decrease in normal cases is implemented


Configuration Reason when the uplink signal quality is normal.

It is required to configure this parameter


according to the requirements on site. To decrease much power,
Configuration Rule and
configure
Adjustment Suggestion
this parameter to a large value. To consider both speed and power
decrease, configure this parameter to a small value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.39.82 reduced power of dummy usf in bad uplink radio condition


Full Name reduced power of dummy usf in bad uplink radio condition

Abbreviation DummyUsfPwr3

2-1681

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object PS Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the deteriorated power of the downlink dummy


block with USF when the downlink power control is enabled and the radio
Description quality of the uplink TBF is poor.

Instance Cell

0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
Value Range and Step 20: 10

Unit dB

Default Value 4

Default Value Power decrease in normal cases is implemented


Configuration Reason when the uplink signal quality is poor.

It is required to configure this parameter


according to the requirements on site. To decrease much power,
Configuration Rule and
configure
Adjustment Suggestion
this parameter to a large value. To consider both speed and power
decrease, configure this parameter to a small value.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-1682

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Power Control

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail New

2.40 EDGE Configuration(GCellEdge)


2.40.1 EDGE Configuration ID
Full Name EDGE Configuration ID

Abbreviation GCellEdge

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

Description EDGE Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1683

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.2 EGPRS packet channel request access program support


Full Name EGPRS packet channel request access program support

Abbreviation egprsPacketChReq

Managed Object EDGE Configuration

3GPP Name EGPRS_PACKET_CHANNEL_REQUEST

3GPP Reference 3GPP TS 44.060

This parameter is broadcast to an MS in GRPS CELL OPTIONS


of SI13, PSI1 and PSI13, indicating whether the cell supports EG-
PRS_PACKET_CHANNEL_REQUEST access flow. If the cell supports
EGPRS and this flow, the EGPRS terminal is able to originate EGPRS
Description packet access flow on RACH or PRACH (if PBCCH exists).

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason New features, consistent with the original

The network side hopes MS adopts one phase


Configuration Rule and access to enable this function. For the cell without forcible two
Adjustment Suggestion phase access, the MS supporting EGPRS will trigger one-phase access
procedure.

Change Mode Offline

Related features ZGO-03-05-003 EGPRS Packet Channel Request on CCCH

Related Parameters N/A

Relationship N/A

2-1684

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Um

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.3 Uplink LA+IR quality control support


Full Name Uplink LA+IR quality control support

Abbreviation irSupportUp

Managed Object EDGE Configuration

3GPP Name RESEGMENT

3GPP Reference 3GPP TS 44.060

This parameter indicates whether the cell supports "uplink IR quality con-
trol". If it does, the network could set the RESEGMENT in PACKET UP-
LINK ACK/NACK, PACKET UPLINK ASSIGNMENT and PACK TIMES-
LOT RECONFIGURE message as FALSE to inform MS system of using
IR quality control mode, and MS uplink retransmission could not be seg-
Description mented.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason New features, consistent with the original

If this switch is enabled, the uplink throughput


Configuration Rule and
can be improved, and MS uplink retransmission is not segmented but
Adjustment Suggestion
occupies BTS memory.

Change Mode Offline

ZGO-03-05-002 EGPRS Link Adaptation


Related features ZGO-03-05-006 Incremental Redundancy in UL

2-1685

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.4 Take Preemptive transmit bit function


Full Name Take Preemptive transmit bit function

Abbreviation preEmptiveTrans

Managed Object EDGE Configuration

3GPP Name PRE_EMPTIVE_TRANSMISSION

3GPP Reference 3GPP TS 44.060

This parameter indicates whether the cell employs "Preemptivetrans bit".


If the cell supports that function, the network indicates the MS whether
to send the RLC data of PENDING-ACK when there is no data in NACK
status and no new RLC data block to be transmitted or the transmission
window is full by PRE_EMPTIVE_TRANSMISSION in PACKET UPLINK
ACK/NACK message.
The values are as follows:
Yes: Use preemptive transmission. The MS should not send the data
block in PENDING-ACK status. But for the last piece of current TBF,
even if its status is PENDING ACK, it should be transmitted.
No: Do not use preemptive transmission. The MS should send the oldest
data in PENDING-ACK status, then the second oldest data. If all data in
Description PENDING-ACK status have been sent, repeated from the oldest one.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

2-1686

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason New features, consistent with the original

If the cell supports that function, network


indicates MS whether to send the RLC data of PENDING-ACK when
there
is no data in NACK status and no new RLC data block to be transmitted
Configuration Rule and
or the transmission window is full by PRE_EMPTIVE_TRANSMISSION
Adjustment Suggestion
in
PACKET UPLINK ACK/NACK message.Enabling the preemptive
transmit function
can improve throughput to a certain extent.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.5 Average filter period for uplink BEP


Full Name Average filter period for uplink BEP

Abbreviation bepPeriodUp

Managed Object EDGE Configuration

3GPP Name BEP_PERIOD

3GPP Reference 3GPP TS 45.008

This parameter is the internal parameter of PCU. The meaning of this


parameter is the same as BEPPeriodDown, but it is to calculate the uplink
Description measurement data inside of PCU.

Instance Cell

2-1687

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..15

Unit N/A

Default Value 4

Default Value Protocol recommended the forgetting factor is 0.4, corresponding to


Configuration Reason this parameter is 4

The relatively large value helps increase the weight of the previous
measurement report. Consequently, it brings a positive impact on the
Configuration Rule and related index of throughput and the actual calculated BEP is more
Adjustment Suggestion reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.6 Average filter period for downlink BEP


Full Name Average filter period for downlink BEP

Abbreviation bepPeriodDown

Managed Object EDGE Configuration

3GPP Name BEP_PERIOD

3GPP Reference 3GPP TS45.008

2-1688

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is broadcast to an MS in GRPS CELL OPTIONS of


SI13, PSI1 and PSI13. In EGPRS system, EGPRS MS will determine
to report the MEAN_REP_AV (average error bit rate of the radio block)
and CV_BEP_AV (variance coefficient of radio block error bit rate) under
the whole TBF, or the measurement data per time slot MEAN_BEP_TNx
(0-7).
The specification defines the formula of these measurement data (refer
to 05.08 10.2.3.2.1). There is an oblivion factor e, whose value is defined
Description by the average period of BEP filter.

Instance Cell

Value Range and Step 0..10

Unit N/A

Default Value 4

Default Value
Configuration Reason Consider Protocol Recommended Value and MS measure time

The relatively large value helps increase the weight of the previous
measurement report. Consequently, it brings a positive impact on the
Configuration Rule and related index of throughput and the actual calculated BEP is more
Adjustment Suggestion reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1689

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.40.7 EGPRS phone quality measure mode


Full Name EGPRS phone quality measure mode

Abbreviation linkQuaMeaMode

Managed Object EDGE Configuration

3GPP Name LINK_QUALITY_MEASUREMENT_MODE

3GPP Reference 3GPP TS 44.060

This parameter is sent to MS in the PACKET DOWNLINK ASSIGNMENT


or PACKET TIMESLOT RECONFIGURE message. It indicates the
measurement report mode of EGPRS
MS in the cell. EGPRS measurement could be performed based on
each impulse, which is to measure by the granularity of BURST. The
feature of rapid EGPRS measurement makes the network side be able
to respond the change of radio environment quickly, so as to choose the
most proper coding mode and perform power control.
This parameter sets the measurement content in EGPRS Timeslot Link
Quality Measurements IE. The following defines the parameter values:
0: The MS reports MEAN-BEP rather than I_LEVEL in accordance with
the TBF.
1: The MS reports MEAN-BEP in accordance with the TBF, and reports
I_LEVEL obtained from the slot 0 to 7.
2. The MS reports MEAN-BEP (rather than I_LEVEL) to which a timeslot
is allocated.
3. The MS reports MEAN-BEP to which a timeslot is allocated, and
Description reports I_LEVEL of which the number of timeslots is no more than 4.

Instance Cell

Value Range and Step 0..3

Unit N/A

Default Value 0

Default Value
Configuration Reason in theory, the performance is best when report on each timeslots

If the value is 123, the MS shall report on each timeslot.In live


Configuration Rule and network, some MS may report abnormal value so that adaptive schedule
Adjustment Suggestion of coding scheme is effected.On the other hand, MEAN_BEP and
CV_BEP reporting is more reasonable, so the proposed value is 0.

Change Mode Offline

Related features ZGO-03-05-002 EGPRS Link Adaptation

Related Parameters N/A

Relationship N/A

2-1690

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.8 EGPRS uplink init. Coding scheme


Full Name EGPRS uplink init. Coding scheme

Abbreviation egprsCodecInitUl

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter defines the EGPRS uplink initial coding scheme of a cell.

Instance Cell

0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
Value Range and Step 8: MCS9

Unit N/A

Default Value 5

Default Value MCS6 is sufficient to meet data transmission requirement in normal


Configuration Reason radio conditions.

Configuration Rule and Set this parameter based on the radio signal quality. If the radio quality
Adjustment Suggestion is good, use a higher initial rate..

Change Mode Offline

Related features N/A

2-1691

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.9 EGPRS downlink init. Coding scheme


Full Name EGPRS downlink init. Coding scheme

Abbreviation egprsCodecInitDl

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter defines the EGPRS downlink initial coding scheme of a


Description cell.

Instance Cell

0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
Value Range and Step 8: MCS9

Unit N/A

Default Value 5

Default Value
Configuration Reason MCS6 is sufficient to meet data transmission requirement

2-1692

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and Set this parameter based on the radio signal quality. If the radio quality
Adjustment Suggestion is good, use a higher initial rate..

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.10 EGPRS uplink max. coding scheme


Full Name EGPRS uplink max. coding scheme

Abbreviation egprsCodecMaxUl

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter defines the EGPRS uplink maximum coding scheme of a


Description cell.

Instance Cell

0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
Value Range and Step 8: MCS9

Unit N/A

2-1693

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 8

Default Value
Configuration Reason Set it to the maximum MCS9.

Configuration Rule and Set this parameter based on the radio signal quality. If the radio quality
Adjustment Suggestion is good, use a higher initial rate..

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.11 EGPRS downlink max. coding scheme


Full Name EGPRS downlink max. coding scheme

Abbreviation egprsCodecMaxDl

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter defines the EGPRS downlink maximum coding scheme


Description of a cell.

Instance Cell

2-1694

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
Value Range and Step 8: MCS9

Unit N/A

Default Value 8

Default Value
Configuration Reason Set this parameter to the maximum MCS9.

Configuration Rule and Set this parameter based on the radio signal quality. If the radio quality
Adjustment Suggestion is good, use a higher initial rate..

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.12 edge Initial access rate


Full Name edge Initial access rate

Abbreviation EdgeIniAccRate

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

2-1695

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter identifies the bandwidth occupied by service access when


Description the EDGE channel is activated.

Instance Cell

Value Range and Step 1..122

Unit kbps

Default Value 32

Default Value
Configuration Reason Set the parameter based on the bandwidth of MCS6 with normal rate.

A greater initial access and admission bandwidth indicates a greater


Configuration Rule and
initial access rate. Set this parameter based on the network's radio
Adjustment Suggestion
quality and bandwidth.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.13 EGPRS phones init. Code can be changed


Full Name EGPRS phones init. Code can be changed

Abbreviation initAttachExchEgprs

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

2-1696

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether the coding mode used by the GPRS
MS in a cell can be dynamically changed.
0: the coding ,mode cannot be dynamically changed.
Description 1: the coding mode can be dynamically changed.

Instance Cell

1: Yes
Value Range and Step 0: No

Unit N/A

Default Value 1

Default Value
Configuration Reason The adaptive coding scheme can improve the data throughput

The value is better set to Yes in accordance


Configuration Rule and
with the adaptive coding scheme of radio environment, so as to improve
Adjustment Suggestion
the packet transmission rate.

Change Mode Offline

Related features ZGO-03-05-002 Initial Coding Scheme per Cell Settable

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.14 Bep_Period2 of uplink


Full Name Bep_Period2 of uplink

Abbreviation ulBepPeriod2

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

2-1697

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The protocol (45.008) stipulates the calculation formula of the measure-


ment data. The oblivion factor e whose value is defined by the average
period of the BEP filter is used in the formula. This parameter is used to
calculate the uplink measurement data of a certain MS inside of PCU and
takes priority over the general parameter BEPperiodUp. If this parameter
Description is unavailable, use the parameter BEPperiodUp.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

Default Value
Configuration Reason Protocol Recommended Value

Configuration Rule and Currently, this parameter is not used and does
Adjustment Suggestion not need to be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.15 Bep_Period2 of downlink


Full Name Bep_Period2 of downlink

Abbreviation dlBepPeriod2

Managed Object EDGE Configuration

3GPP Name BEP_PERIOD2

3GPP Reference 3GPP TS 45.008

2-1698

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is sent to the MS. The protocol (45.008) stipulates the
calculation formula of the measurement data. The oblivion factor e
whose value is defined by the average period of the BEP filter is used in
the formula. This parameter is applied to a certain MS and takes priority
over the BEPperiodDown parameter broadcast in the system message
13 or the packet system message 13. If this parameter is unavailable,
the MS uses the BEPperiodDown parameter. If this parameter is
Description available, the MS uses the Through PACCH/DL parameter.

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value 4

Default Value
Configuration Reason Protocol Recommended Value

Configuration Rule and Currently, this parameter is not used and does
Adjustment Suggestion not need to be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.16 Interval number of downlink EGPRS TBFs RRBP


Full Name Interval number of downlink EGPRS TBFs RRBP

Abbreviation egprsDlRRBPInterval

Managed Object EDGE Configuration

3GPP Name N/A

2-1699

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates the interval that downlink EGPRS TBF requires
Description MS to send EGPRS Packet Donwlink Ack/Nack.

Instance Cell

Value Range and Step 6..60

Unit N/A

Default Value 10

Default Value It is recommended to set it to 10 in a radio network with the ratio of


Configuration Reason downlink speech RQ0-5 as around 97%.

If this parameter is set to a low value, for EDGE service, MS's downlink
receiving bitmap information can be notified to BSC in a faster way, but
more uplink signaling blocks are occupied. If this parameter is set to a
Configuration Rule and
great value, MS's downlink receiving bitmap information are notified
Adjustment Suggestion
to BSC slowly and less uplink signaling blocks are occupied. In this
case, re-transmission rate at RLC layer is reduced. The value needs no
modification unless specially required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.17 Interval number of uplink EGPRS TBFs ACK


Full Name Interval number of uplink EGPRS TBFs ACK

Abbreviation egprsUlAckInterval

Managed Object EDGE Configuration

2-1700

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the interval that the uplink EGPS TBF network
Description sends packet uplink Ack/Nack to the MS.

Instance Cell

Value Range and Step 3..20

Unit N/A

Default Value 8

Default Value It is recommended to set the default value as 8 when the percentage
Configuration Reason of the downlink voice RQ0~5 is around 97%.

The smaller the value is, the fewer the EDGE


services are, the faster the uplink received bitmap information of
the MS can be notified to BSC, and the more the downlink signalling
Configuration Rule and blocks are occupied. The larger the value is, the more the EDGE
Adjustment Suggestion services
are, the slower the uplink received bitmap information of the MS can
be notified to BSC, and the fewer the downlink signalling blocks are
occupied. If no special requirement, the value should not be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.40.18 Initial EGPRS code schem at one phase access


Full Name Initial EGPRS code schem at one phase access

Abbreviation OnePhaAccIniECodSch

2-1701

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

When the value of "OnePhaAccIniCodSet" (one-phase access initial code


Description selection) is 0, this parameter determines the EGPRS initial code scheme.

Instance Cell

Value Range and Step 0..8

Unit N/A

Default Value 1

Default Value
Configuration Reason Keep it the same as that in the previous version.

This parameter affects the initial access code scheme of all MSs in
Configuration Rule and
the cell. Increase the value of this parameter while ensuring the link
Adjustment Suggestion
establishment success rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41 Enhanced EDGE Configuration(GEhancedEdge)


2.41.1 Enhanced EDGE Configuration ID
Full Name Enhanced EDGE Configuration ID

Abbreviation GEhancedEdge

2-1702

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

Description Enhanced EDGE Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.2 EGPRS2-A uplink initial coding scheme


Full Name EGPRS2-A uplink initial coding scheme

Abbreviation egprs2ACodecInitUl

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

2-1703

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the coding scheme initially used by EGPRS2A


Description MS in the uplink.

Instance Cell

4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
Value Range and Step 17: UAS11

Unit N/A

Default Value 15

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters egprs2ACodecMaxUl

The value of EGPRS2AInitAttSelt_0 is not greater


Relationship
than that of EGPRS2AInitAttSelt_2.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1704

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.41.3 EGPRS2-A downlink initial coding scheme


Full Name EGPRS2-A downlink initial coding scheme

Abbreviation egprs2ACodecInitDl

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the coding scheme initially used by EGPRS2A


Description MS in the downlink.

Instance Cell

4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
Value Range and Step 20: DAS12

Unit N/A

Default Value 17

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1705

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.4 EGPRS2-A uplink maximum coding scheme


Full Name EGPRS2-A uplink maximum coding scheme

Abbreviation egprs2ACodecMaxUl

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum coding scheme that can be used
Description by EGPRS2A MS in the uplink.

Instance Cell

4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
Value Range and Step 17: UAS11

Unit N/A

Default Value 17

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters egprs2ACodecInitUl

2-1706

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The value of EGPRS2AInitAttSelt_1 is not greater


Relationship
than that of EGPRS2AInitAttSelt_3.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.5 EGPRS2-A downlink maximum coding scheme


Full Name EGPRS2-A downlink maximum coding scheme

Abbreviation egprs2ACodecMaxDl

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum coding scheme that can be used
Description by EGPRS2A MS in the downlink.

Instance Cell

4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
Value Range and Step 20: DAS12

Unit N/A

Default Value 20

2-1707

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.6 FANR TBF support


Full Name FANR TBF support

Abbreviation TBFFanrSupport

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the cell supports the fast


acknowledgement report (FANR) function. If the network and the MS
support this function, the MS can receive messages through donwlink
radio blocks carried in the uplink radio block, and the network can
receive messages through uplink radio blocks carried in the downlink
radio block. In this case, they can timely know the receiving condition of
uplink/downlink radio blocks, and the retransmission of uplink/downlink
radio blocks that are improperly received is accelerated. The FANR is
Description one of the EDGE evolution functions.

Instance Cell

2-1708

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason This function is newly added in the protocol and is not enabled by default.

Configuration Rule and Enable this function if FANR function needs to be provided on site.
Adjustment Suggestion Otherwise, disable the function.

Change Mode Offline

Related features N/A

Related Parameters FanrSupport

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.7 DLDC support


Full Name DLDC support

Abbreviation dlDCSupport

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the cell supports downlink dual carrier.If
the network and MS support the downlink dual carrier, two carriers can be
Description allocated to the downlink.

Instance Cell

2-1709

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters refGTrx

Relationship refGTrx of GTrx needs to be configured when this parameter is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.8 RTTI support


Full Name RTTI support

Abbreviation rttiSupport

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference N/A

2-1710

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether the reduced transmission time Interval


(RTTI) function is supported.
RTTI is a concept relative to BTTI. BTTI is short for basic transmission
time interval, that is, using four consecutive Bursts on a channel
to transmit a radio block, and it takes 20 ms to transmit a radio block. For
RTTI, two consecutive Bursts on two channels (PDCH-pair) respectively
Description are used, and it takes only 10 ms to transmit a radio block.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters RTTIPrefer

The RTTIPrefer parameter should be configured until this parameter


Relationship
is enabled.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.9 Enable event-based FANR in downlink TBF


Full Name Enable event-based FANR in downlink TBF

Abbreviation dlEventBasedFanr

2-1711

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Enhanced EDGE Configuration

3GPP Name event-based FANR

3GPP Reference 3GPP TS 44.060

This parameter is issued to MS in packet downlink assignment, indicating


whether MS uses event-based FANR. That is, upon detecting that the
downlink block is lost or in disorder, the MS actively carries the bitmap
Description message of downlink block in the uplink radio block data.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.10 Enable reduced latency access


Full Name Enable reduced latency access

Abbreviation RttiAccess

2-1712

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.060

This parameter is broadcast to the MS through tSI13/PSI13, indicating


Description the MS whether to use RTT to access.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason It is a newly added function in the protocol and disabled by default.

Configuration Rule and Enable this function if FANR function needs to be provided on site.
Adjustment Suggestion Otherwise, disable the function.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.41.11 Encoding mode of PAN in uplink TBF


Full Name Encoding mode of PAN in uplink TBF

Abbreviation ulPanEncodingMode

Managed Object Enhanced EDGE Configuration

3GPP Name N/A

2-1713

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter is issued to MS in packet uplink assignment, indicating


whether uplink TBF uses SSN-based encoding. That is, the received
bitmap uses the format similar to the received block bitmap format in the
Description downlink acknowledgment message.

Instance Cell

0: SSN-based encoding
Value Range and Step 1: time-based encoding

Unit N/A

Default Value 0

Default Value
Configuration Reason only implement encode based on SSN

Configuration Rule and Currently, this parameter is always 0 and does


Adjustment Suggestion not need to be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->EDGE Configuration->Enhanced
EDGE Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42 Serving Cell CRRM Configuration(GCrrmCellLd)


2.42.1 Serving Cell CRRM Configuration ID
Full Name Serving Cell CRRM Configuration ID

Abbreviation GCrrmCellLd

2-1714

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

Description Serving Cell CRRM Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.2 Uplink Load Low Threshold


Full Name Uplink Load Low Threshold

Abbreviation ulLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

2-1715

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the threshold for GSM to judge whether the up-
Description link load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.3 Uplink Load Medium Threshold


Full Name Uplink Load Medium Threshold

Abbreviation ulLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link load of the local serving cell is mediocre.

Instance BSC

2-1716

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.4 Uplink Load High Threshold


Full Name Uplink Load High Threshold

Abbreviation ulLoadHighThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

2-1717

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.5 Downlink Load Low Threshold


Full Name Downlink Load Low Threshold

Abbreviation dlLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

2-1718

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.6 Downlink Load Medium Threshold


Full Name Downlink Load Medium Threshold

Abbreviation dlLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink load of the local serving cell is mediocre.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

2-1719

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.7 Downlink Load High Threshold


Full Name Downlink Load High Threshold

Abbreviation dlLoadHighThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

2-1720

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.8 Real Time Uplink Load Low Threshold


Full Name Real Time Uplink Load Low Threshold

Abbreviation ulRtLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link real-time load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1721

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.9 Real Time Uplink Load Medium Threshold


Full Name Real Time Uplink Load Medium Threshold

Abbreviation ulRtLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link real-time load of the local serving cell is mediocre.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1722

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.10 Real Time Uplink Load High Threshold


Full Name Real Time Uplink Load High Threshold

Abbreviation ulRtLoadHighThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link real-time load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1723

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.11 Real Time Downlink Load Low Threshold


Full Name Real Time Downlink Load Low Threshold

Abbreviation dlRtLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink real-time load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

2-1724

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.12 Real Time Downlink Load Medium Threshold


Full Name Real Time Downlink Load Medium Threshold

Abbreviation dlRtLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink real-time load of the local serving cell is mediocre.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

2-1725

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.42.13 Real Time Downlink Load High Threshold


Full Name Real Time Downlink Load High Threshold

Abbreviation dlRtLoadHighThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the
Description downlink real-time load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1726

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.42.14 Not Real Time Uplink Load Low Threshold


Full Name Not Real Time Uplink Load Low Threshold

Abbreviation ulNRtLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link non-real-time load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.15 Not Real Time Uplink Load Medium Threshold


Full Name Not Real Time Uplink Load Medium Threshold

2-1727

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation ulNRtLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link non-real-time load of the local serving cell is mediocre

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.16 Not Real Time Uplink Load High Threshold


Full Name Not Real Time Uplink Load High Threshold

Abbreviation ulNRtLoadHighThs

Managed Object Serving Cell CRRM Configuration

2-1728

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link non-real-time load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.17 Not Real Time Downlink Load Low Threshold


Full Name Not Real Time Downlink Load Low Threshold

Abbreviation dlNRtLoadLowThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

2-1729

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the threshold for GSM to judge whether the
Description downlink non-real-time load of the local serving cell is low.

Instance BSC

Value Range and Step 1..100

Unit %

Default Value 20

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.18 Not Real Time Downlink Load Medium Threshold


Full Name Not Real Time Downlink Load Medium Threshold

Abbreviation dlNRtLoadMidThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link non-real-time load of the local serving cell is mediocre.

Instance BSC

2-1730

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..100

Unit %

Default Value 50

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.42.19 Not Real Time Downlink Load High Threshold


Full Name Not Real Time Downlink Load High Threshold

Abbreviation dlNRtLoadHighThs

Managed Object Serving Cell CRRM Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for GSM to judge whether the up-
Description link non-real-time load of the local serving cell is high.

Instance BSC

Value Range and Step 1..100

Unit %

2-1731

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 80

Default Value
Configuration Reason general value

Adjust this parameter based on the network operating load and


Configuration Rule and
balancing policy. When GSM load is not high and GSM is expected to
Adjustment Suggestion
absorb traffic, set the threshold to a higher value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Serving Cell CRRM Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.43 SubCell(GSubCell)
2.43.1 SubCell ID
Full Name SubCell ID

Abbreviation GSubCell

Managed Object SubCell

3GPP Name N/A

3GPP Reference N/A

Description SubCell ID

Instance None

Value Range and Step 1..2

Unit N/A

Default Value NA

2-1732

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.43.2 SubCell Sequence


Full Name SubCell Sequence

Abbreviation GSubCellSeq

Managed Object SubCell

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the subcell sequence.

Instance Cell

Value Range and Step 1..2

Unit N/A

Default Value 1

Default Value
Configuration Reason CoBCCH is not used by default.

Configuration Rule and


Adjustment Suggestion Create sub-cell 2 by using a cell with the CoBCCH structure.

2-1733

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.43.3 Frequency Band of SubCell


Full Name Frequency Band of SubCell

Abbreviation subFreqBand

Managed Object SubCell

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the frequency band of subcells.

Instance Cell

0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
Value Range and Step 7: GSM850\(128..251\)(GSM850\(128..251\))

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

2-1734

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

If "Subcell used" is set to "Yes", this parameter can be configurable.


Relationship The value of DCS1800/PCS1900 supported (FuncExt) has influence on
the value range of this parameter.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44 Subcell Handover Control(GScHandoverControl)


2.44.1 COBCCH Handover Control ID
Full Name COBCCH Handover Control ID

Abbreviation GScHandoverControl

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description COBCCH Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

2-1735

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.2 PBGT handover start threshold of subcell2


Full Name PBGT handover start threshold of subcell2

Abbreviation PbgtHoStartThsSC2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

When the MS operates in the subcell 2, PBGT handover decision is mde


until the donwlink level of the current cell s lower than the start level thresh-
Description old for PBGT handover decision.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The value of field experience

Set this parameter to a low value if unnecessary handovers need to be


Configuration Rule and
reduced. Set this parameter to a high value if timely handovers are
Adjustment Suggestion
required.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

2-1736

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.44.3 The load of HO from AMR FR to AMR HR in subcell2


Full Name The load of HO from AMR FR to AMR HR in subcell2

Abbreviation FrToAmrHrHoLoadThSC2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

When the load of the subcell 2 reaches a certain level, FR->HR(V3) han-
dover needs to be initiated, to obtain more channel resources and improve
system capacity. This parameter indicates the load threshold for initiating
FR->HR(V3) handover. This parameter value should be greater than or
equal to FrToHrHoLoadThrSC2. The load is calculated as follows: Load =
number of busy channels in the subcell * 100 / (number of busy channels
Description in the subcell + number of idle channels in the subcell)

Instance Cell

Value Range and Step 20..100

Unit %

Default Value 80

Default Value When the second sub-cell load reaches 80%, it is regarded as busy and
Configuration Reason can perform an FR-to-HR(V3) handover to improve system capacity.

2-1737

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter is validated when FRTHRHOSupport is enabled in the


cell.
A greater value indicates that heavier load is required for the second
sub-cell to initiate an FR-to-HR(V3) handover, which leads to less
Configuration Rule and
opportunities.
Adjustment Suggestion
A lower value indicates that lower load is required for the second sub-cell
to initiate an FR-to-HR(V3) handover, which leads to more opportunities.
If the parameter is set too low, the times of intra-cell handovers in the
second sub-cell are improved.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters FrToHrHoLoadThrSC2

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.44.4 The load of HO from FR to HR(V1) in subcell2


Full Name The load of HO from FR to HR(V1) in subcell2

Abbreviation FrToHrHoLoadThrSC2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

When the load of the subcell 2 reaches a certain level, FR->HR(V1) han-
dover needs to be initiated, to obtain more channel resources and improve
system capacity. This parameter indicates the load threshold for initiat-
ing FR->HR(V1) handover. This parameter value should be greater than
or equal to FrToAmrHrHoLoadThSC2. The load is calculated as follows:
Load = number of busy channels in the subcell * 100 / (number of busy
Description channels in the subcell + number of idle channels in the subcell)

2-1738

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 20..100

Unit %

Default Value 90

Default Value When the second sub-cell load reaches 90%, it is regarded as busy and
Configuration Reason can perform an FR-to-HR(V1) handover to improve system capacity.

This parameter is validated when FRTHRHOSupport is enabled in the


cell.
A greater value indicates that heavier load is required for the second
sub-cell to initiate an FR-to-HR(V1) handover, which leads to less
Configuration Rule and
opportunities.
Adjustment Suggestion
A lower value indicates that lower load is required for the second sub-cell
to initiate an FR-to-HR(V1) handover, which leads to more opportunities.
If the parameter is set too low, the times of intra-cell handovers in the
second sub-cell are improved.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters FrToAmrHrHoLoadThSC2

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.44.5 SubCell handover algorithm(High Speed)


Full Name SubCell handover algorithm(High Speed)

Abbreviation hoControlScHoOpt_H

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1739

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates two handover modes of inter-subcell handover


algorithm in the case of high speed: One is based on C/I, and the other
Description is based on path loss and TA.

Instance Cell

0: Concentric handover
Value Range and Step 1: Handover based on path loss and TA

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

It is recommended that the handover mode be


Configuration Rule and changed to handover based on path loss and TA. Currently, this
Adjustment Suggestion handover
algorithm is widely used for COBCCH handovers on site.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.44.6 SubCell handover algorithm(Middle Speed)


Full Name SubCell handover algorithm(Middle Speed)

Abbreviation hoControlScHoOpt_M

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1740

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates two handover modes of inter-subcell handover


algorithm in the case of medium speed: One is based on C/I, and the
Description other is based on path loss and TA.

Instance Cell

0: Concentric handover
Value Range and Step 1: Handover based on path loss and TA

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

It is recommended that the handover mode be


Configuration Rule and changed to handover based on path loss and TA. Currently, this
Adjustment Suggestion handover
algorithm is widely used for COBCCH handovers on site.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version iBSCV6.20.615b

Parameter Modifying
Detail New

2.44.7 SubCell handover algorithm(Low Speed)


Full Name SubCell handover algorithm(Low Speed)

Abbreviation hoControlScHoOpt_L

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1741

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates two handover modes of subcell handover algo-


Description rithm: One is based on C/I, and the other is based on path loss and TA.

Instance Cell

0: Concentric handover
Value Range and Step 1: Handover based on path loss and TA

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

It is recommended that the handover mode be


Configuration Rule and changed to handover based on path loss and TA. Currently, this
Adjustment Suggestion handover
algorithm is widely used for COBCCH handovers on site.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.8 The MAX of path loss


Full Name The MAX of path loss

Abbreviation pathLossMax

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1742

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is one of the subcell handover parameters and is the


maximum threshold for path loss. During assignment, if byPathLoss
PathLossMin and TASubCellTAMin, select the channel in the subcell
2 with priority. If byPathLossPathLossMin or TASubCellTAMin, only
select the channel in the subcell 1. During handover, if the current
call is in the subcell 1, the TA value is smaller than the SubCellTAMin
threshold set by cell parameters. Meanwhile, the path loss calculated
by the downlink level is lower than the PathLossMin threshold set
by cell parameters. That is, byPathLossPathLossMin and TA
SubCellTAMin. If SubCellP in SubCellN satisfies byPathLoss
PathLossMin and TASubCellTAMin, and the MS supports the
frequency band of subcell 2, handover to the subcell can be performed
from subcell 1 to subcell 2.
If the current call is in the subcell 2, and SubCellN PathLoss
and SubCellP in TA values satisfy PathLossPathLossMax or
TASubCellTAMax, path loss ls made and TA handover is performed
Description from subcell 2 to subcell 1.

Instance Cell

Value Range and Step 0..150

Unit dB

Default Value 126

Default Value
Configuration Reason Due to the practical application of the net

The larger the value is, it is more difficult


Configuration Rule and
to initiate handover from subcell 2 to subcell 1 due to pass loss,
Adjustment Suggestion
and vice versa it is easier.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

2-1743

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.44.9 The MIN of path loss


Full Name The MIN of path loss

Abbreviation pathLossMin

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is one of the subcell handover parameters. It is the mini-


Description mum path loss.For its description, refer to PathLossMax.

Instance Cell

Value Range and Step 0..150

Unit dB

Default Value 120

Default Value
Configuration Reason Due to the practical application of the net

The larger the value is, it is easier to initiate


Configuration Rule and
handover in subcell 2 and handover is easier to be performed from
Adjustment Suggestion
subcell 1 to subcell 2. Otherwise, it is more difficult.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1744

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.44.10 The MAX of time advance


Full Name The MAX of time advance

Abbreviation SubCellTAMax

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is one of the subcell handover parameters. It is the max-


Description imum threshold of TA. For its description, refer to PathLossMax.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 63

Default Value
Configuration Reason Due to the practical application of the net

The larger the value is, it is more difficult


Configuration Rule and
for TA to initiate handover from subcell 2 to subcell 1, and vice
Adjustment Suggestion
versa it is easier.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.11 The MIN of time advance


Full Name The MIN of time advance

2-1745

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation SubCellTAMin

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is one of the subcell handover parameters. It is the mini-


Description mum threshold of TA. For its description, refer to PathLossMax.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 62

Default Value
Configuration Reason Due to the practical application of the net

The larger the value is, it is easier to initiate


Configuration Rule and
handover in subcell 2 and handover is easier to be performed from
Adjustment Suggestion
subcell 1 to subcell 2. Otherwise, it is more difficult.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.12 Inter Site handover to SubCell2 permitted


Full Name Inter Site handover to SubCell2 permitted

Abbreviation HoToInnerSc

Managed Object Subcell Handover Control

2-1746

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

This parameter decides whether it is allowed to perform direct handover


from other sites to the Subcell2 of this cell. Here, other sites include the
Description sites of external BSC.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value This is a special functional switch, which


Configuration Reason is disabled by default.

If the subcell is available and it is better


for the subcell 2 to share more traffic, this function should be
Configuration Rule and
enabled.After
Adjustment Suggestion
this function is enabled, capability of absorbing traffic of the subcell
2 can be enhanced, but handover success rate will be influenced.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.13 Measure BCCH when in subcell2


Full Name Measure BCCH when in subcell2

Abbreviation SubCell2MeasureBcch

2-1747

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If this parameter is configured to "Yes", the system adds a BCCH fre-


quency point for broadcasting this cell in the SACCH system message
of the subcell 2. After the MS reports measurement reports, the system
collects statistics on the sampling distribution of level difference between
the subcell 1 and the subcell 2. If the MR function is enabled, the system
Description reports the level difference in the MR.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Enable this function according to operator


Configuration Reason requirements or network optimization requirements.

Configuration Rule and Enable this function according to operator


Adjustment Suggestion requirements or network optimization requirements.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.44.14 Good C/I


Full Name Good C/I

2-1748

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation goodCiThs

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained.
The judgement process is discribed as follows: the current call is on the
common TRX(frequency), if there is P fulfil the condition in the latest N
average values, handover should happen and the reason is Good C/I.
Handover happens from common TRX to the special TRX.
GoodCiThs defines the value of the related threshold , GoodCiN defines
Description the related N value, and GoodCiP defines the related P value.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 133

Default Value
Configuration Reason Due to the practical application of the net

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1749

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.44.15 Good value P


Full Name Good value P

Abbreviation goodCiP

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained.
The judgement process is discribed as follows: the current call is on the
common TRX(frequency), if there is P fulfil the condition in the latest N
average values, handover should happen and the reason is Good C/I.
Handover happens from common TRX to the special TRX.
GoodCiThs defines the value of the related threshold , GoodCiN defines
Description the related N value, and GoodCiP defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason Due to the practical application of the net

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

2-1750

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.44.16 Good value N


Full Name Good value N

Abbreviation goodCiN

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained.
The judgement process is discribed as follows: the current call is on the
common TRX(frequency), if there is P fulfil the condition in the latest N
average values, handover should happen and the reason is Good C/I.
Handover happens from common TRX to the special TRX.
GoodCiThs defines the value of the related threshold , GoodCiN defines
Description the related N value, and GoodCiP defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason Due to the practical application of the net

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1751

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.17 Bad C/I


Full Name Bad C/I

Abbreviation badCiThs

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained. The C/I of the frequency
of the current special layer is one of the causes for concentric handover.
The judgement process is discribed as follows: the current call is on the
special TRX(frequency), if there is P fulfil the condition in the latest N
average values of C/I, handover should happen and the reason is Bad
C/I. Handover happens from special TRX to the common TRX.
BadCiThs defines the value of the related threshold , BadCiN defines
Description the related N value, and BadCiP defines the related P value.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 130

Default Value
Configuration Reason Due to the practical application of the net

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

2-1752

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.18 Bad value P


Full Name Bad value P

Abbreviation badCiP

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained. The C/I of the frequency
of the current special layer is one of the causes for concentric handover.
The judgement process is discribed as follows: the current call is on the
special TRX(frequency), if there is P fulfil the condition in the latest N
average values of C/I, handover should happen and the reason is Bad
C/I. Handover happens from special TRX to the common TRX.
BadCiThs defines the value of the related threshold , BadCiN defines
Description the related N value, and BadCiP defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason Due to the practical application of the net

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

2-1753

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.19 Bad value N


Full Name Bad value N

Abbreviation badCiN

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the system uses concentric handover, handover judgement happens


after a series of the average values is obtained. The C/I of the frequency
of the current special layer is one of the causes for concentric handover.
The judgement process is discribed as follows: the current call is on the
special TRX(frequency), if there is P fulfil the condition in the latest N
average values of C/I, handover should happen and the reason is Bad
C/I. Handover happens from special TRX to the common TRX.
BadCiThs defines the value of the related threshold , BadCiN defines
Description the related N value, and BadCiP defines the related P value.

Instance Cell

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason Due to the practical application of the net

2-1754

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is valid till the system is


configured as concentric structure and employs the handover algorithm
Configuration Rule and
based on C/I. The smaller the value is, the easier it is to satisfy
Adjustment Suggestion
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.

Change Mode Offline

Related features ZGO-05-02-009 Concentric Circle Technology

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.20 Handover Parameter N of SubCell1


Full Name Handover Parameter N of SubCell1

Abbreviation SubCell1N

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for inter-subcell handover decision. For details,


Description refer to the description of PathLossMax.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 3

Default Value
Configuration Reason Empirical value in normal radio environment

2-1755

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and This parameter is used in combination with the Handover Parameter P
Adjustment Suggestion of SubCell1. A greater P/N indicates a stricter handover requirement.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.21 Handover Parameter P of SubCell1


Full Name Handover Parameter P of SubCell1

Abbreviation SubCell1P

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for inter-subcell handover decision. For details,


Description refer to the description of PathLossMax.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 2

Default Value
Configuration Reason Empirical value in normal radio environment

Configuration Rule and This parameter is used in combination with the Handover Parameter N
Adjustment Suggestion of SubCell1. A greater P/N indicates a stricter handover requirement.

Change Mode Offline

2-1756

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.22 Handover Parameter N of SubCell2


Full Name Handover Parameter N of SubCell2

Abbreviation SubCell2N

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the N value of subcell2 handover parameter.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 3

Default Value
Configuration Reason To guarantee stable and reliable handover decision

Configuration Rule and


Adjustment Suggestion Set a lower value if a quicker handover decision is required.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters SubCell2P

Relationship SubCell2N>=SubCell2P

Related Interfaces N/A

2-1757

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.23 Handover Parameter P of SubCell2


Full Name Handover Parameter P of SubCell2

Abbreviation SubCell2P

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the P value of subcell2 handover parameter.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 2

Default Value
Configuration Reason To guarantee stable and reliable handover decision

Configuration Rule and


Adjustment Suggestion Set a lower value if a quicker handover decision is required.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters SubCell2N

Relationship SubCell2N>=SubCell2P

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1758

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.24 SubCell2 To SubCell1 Handover Threshold


Full Name SubCell2 To SubCell1 Handover Threshold

Abbreviation SubCellHoDLThs

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter sets the level threshold of handovers between subcells.

Instance Cell

0:< -110dBm
1:-110~-109 dBm
2:-109~-108dBm
3:-108~-107dBm
4:-107~-106dBm
5:-106~-105dBm
6:-105~-104dBm
7:-104~-103dBm
8:-103~-102dBm
9:-102~-101dBm
10:-101~-100dBm
11:-100~-99dBm
12:-99~-98dBm
13:-98~-97dBm
14:-97~-96dBm
15:-96~-95dBm
16:-95~-94dBm
17:-94~-93dBm
18:-93~-92dBm
19:-92~-91dBm
20:-91~-90dBm
21:-90~-89dBm
22:-89~-88dBm
Value Range and Step
23:-88~-87dBm

2-1759

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

24:-87~-86dBm
25:-86~-85dBm
26:-85~-84dBm
27:-84~-83dBm
28:-83~-82dBm
29:-82~-81dBm
30:-81~-80dBm
31:-80~-79dBm
32:-79~-78dBm
33:-78~-77dBm
34:-77~-76dBm
35:-76~-75dBm
36:-75~-74dBm
37:-74~-73dBm
38:-73~-72dBm
39:-72~-71dBm
40:-71~-70dBm
41:-70~-69dBm
42:-69~-68dBm
43:-68~-67dBm
44:-67~-66dBm
45:-66~-65dBm
46:-65~-64dBm
47:-64~-63dBm
48:-63~-62dBm
49:-62~-61dBm
50:-61~-60dBm
51:-60~-59dBm
52:-59~-58dBm
53:-58~-57dBm
54:-57~-56dBm
55:-56~-55dBm
56:-55~-54dBm
57:-54~-53dBm
58:-53~-52dBm
59:-52~-51dBm
60:-51~-50dBm
61:-50~-49dBm
62:-49~-48dBm
63:> -48dBm

Unit N/A

Default Value 25

2-1760

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The level to ensure proper operation of a cell

Configuration Rule and Set a higher threshold if the QoS is not improved after the handover to
Adjustment Suggestion sub-cell 1.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.25 Traffic Threshold of Handover in SubCell1


Full Name Traffic Threshold of Handover in SubCell1

Abbreviation SC1LoadThs1

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the terminal is located in subcell2 and subcell1 is preferred to be se-


lected, the terminal is handed over to subcell1 when the inter-subcell han-
dover conditions are met and the traffic in subcell1 is lower than the pa-
Description rameter value.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 50

Default Value
Configuration Reason Empirical value

2-1761

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and For subcell1 preference in channel allocation, set a greater value if
Adjustment Suggestion subcell1 s expected to absorb more traffic during assignment.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.44.26 Traffic Threshold of Handover out SubCell1


Full Name Traffic Threshold of Handover out SubCell1

Abbreviation SC1LoadThs2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

If the terminal is located in subcell1 and subcell1 is preferred to be se-


lected, the terminal is handed over to subcell2 when the inter-subcell han-
dover conditions are met and the traffic in subcell1 is higher than the pa-
Description rameter value.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason Empirical value

Configuration Rule and For subcell1 preference in channel allocation, set a greater value if
Adjustment Suggestion subcell1 s expected to absorb more traffic during assignment.

2-1762

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

V1
2.44.27 The load of HO from HR to FR for Subcell2
Full Name The load of HO from HRV1 to FR for Subcell2

Abbreviation HrToFrHoLoadThrSC2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Load (low threshold) of the subcell2 that triggers an HR (V1)-FR handover.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 30

The parameter value is determined by the user experience and the load
Default Value
on a channel. For example, if the load on a channel is lower than 30, the
Configuration Reason
full rate mode can be applied to improve the user experience.

After a handover to the FR mode, the load on the current channel is


increased, and it is possible to reach the load threshold triggering a
Configuration Rule and
handover to the dynamic HR mode. This parameter must be set to a
Adjustment Suggestion
value that can not only improve the user experience, but also
avoid frequent handovers.

Change Mode Offline

2-1763

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-04-02-005 Co-BCCH

Related Parameters AmrHrToFrHoLoadThSC2

AmrHRThs >HrToFrHoLoadThrSC2> =AmrHrToFrHoLoadThSC2


Relationship
FrToHrHoLoadThrSC2> HrToFrHoLoadThrSC2

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

V3
2.44.28 The load of HO from HR to FR for Subcell2
Full Name The load of HO from HRV3 to FR for Subcell2

Abbreviation AmrHrToFrHoLoadThSC2

Managed Object Subcell Handover Control

3GPP Name N/A

3GPP Reference N/A

Description Load (low threshold) of the subcell2 that triggers an HR (V3)-FR handover.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 20

The parameter value is determined by the user experience and the load
Default Value
on a channel. For example, if the load on a channel is lower than 20, the
Configuration Reason
AMR full rate mode can be applied to improve the user experience.

After a handover to the AMR FR mode, the load on the current channel
is increased, and it is possible to reach the load threshold triggering a
Configuration Rule and
handover to the dynamic HR mode. This parameter must be set to a
Adjustment Suggestion
value that can not only improve the user experience, but also avoid
frequent handovers.

Change Mode Offline

2-1764

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGO-04-02-005 Co-BCCH

Related Parameters HrToFrHoLoadThrSC2

AmrHRThs >HrToFrHoLoadThrSC2>= AmrHrToFrHoLoadThSC2


Relationship
FrToAmrHrHoLoadThSC2> AmrHrToFrHoLoadThSC2

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Subcell Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.45 SubCell PS Channel Allocation


Configuration(GSubCellPsAlloc)
2.45.1 SubCell PS Channel Allocation Configuration ID
Full Name SubCell PS Channel Allocation Configuration ID

Abbreviation GSubCellPsAlloc

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

Description SubCell PS Channel Allocation Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

2-1765

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.45.2 SubCell selection of PS channel allocation


Full Name SubCell selection of PS channel allocation

Abbreviation psAllocSc

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name None

3GPP Reference N/A

After one subcell is configured, user can control the subcell selection
strategy by this parameter. The strategy includes preferring the first
subcell, preferring the second subcell, and only selecting the first
subcell. Setting of this parameter affects the parameter strategy when
the control plane applies for channels to the database. In accordace
with the parameter strategy, the user plane determines to uise which
strategy.The strategy is described as follows:
Only selecting the first subcell: The parameter strategy sent from
the control plane to the database can only be the first subcell. This
parameter should be configured if the current network only needs the
first subcell to support PS services.
Preferring the first subcell: When the user can camp either on the first
subcell or the second subcell (determined by the level and TA value),
the allocation strategy transmitted to the database is preferring the
second subcell.
The principle for the databse to allocate these three parameters is as
Description
follows:

2-1766

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Only selecting the first subcell: PS services can only be allocated to the
channel of the first subcell with no repect to any channel of the second
subcell.
Preferring the first subcell: PS services are preferentially allocated to the
first subcell until the number of PFC users is unsatisfied or the number
of available channels in the first subcell is inadequate.
Preferring the second subcell: PS services are preferentially allocated to
the second subcell until the number of PFC users is unsatisfied or the
number of available channels in the first subcell is inadequate.

Instance Cell

0: Prefer subcell 1
1: Prefer subcell 2
Value Range and Step 2: Only subcell 1

Unit N/A

Default Value 0

Default Value The first subcell aborbs PS traffic by default,


Configuration Reason so PS channels are preferentially allocated in the first subcell.

If the PS channels that can be used are configured only for the first
subcell, this parameter can be adjusted as "the first subcell only".
Configuration Rule and
If congestion occurs to the PS service in the first subcell on site, and
Adjustment Suggestion
the PS channels in the second subcell are idle, this parameter can be
adjusted as " the second subcell preferred".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1767

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.45.3 RXLEV threshold in SubCell 1


Full Name RXLEV threshold in SubCell 1

Abbreviation rxLevThs1

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name None

3GPP Reference N/A

After subcell is configured, this parameter is used to control the level


threshold for selecting the first subcell. When PS channel is in the
second subcell, if the level is smaller than PSALLOCSC_1 and TA is
larger than PagBlkRes, then it is necessary to move to the first subcell.
If the channel allocation strategy configured at the background is
preferring the second subcell, apply for the channel that reselects
preferring the first subcell to the databse.
If the channel allocation strategy configured at the background is
preferring the first subcell, apply for the channel that reselects preferring
Description the first subcell to the databse

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value The default value is dependent upon the actual


Configuration Reason request on site.

The value can be adjusted in accordance with


Configuration Rule and
the actual on-site condition. If the PS traffic in the first subcell
Adjustment Suggestion
is considered as too much, increase the value appropriately.

Change Mode Offline

Related features N/A

Related Parameters N/A

This parameter is valid only when the parameter


Relationship PSALLOCSC_0 is configured as the second subcell preferred or the first
subcell preferred.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

2-1768

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.45.4 RXLEV threshold in SubCell 2


Full Name RXLEV threshold in SubCell 2

Abbreviation rxLevThs2

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name None

3GPP Reference N/A

After subcell is configured, this parameter is used to control the level


threshold for selecting the second subcell. When PS channel is in the
first subcell, if the level is smaller than PSALLOCSC_1 and TA is larger
than PagBlkRes, then it is necessary to move to the first subcell.
If the channel allocation strategy configured at the background is
preferring the second subcell, apply for the channel that reselects
preferring the first subcell to the databse.
If the channel allocation strategy configured at the background is
preferring the first subcell, apply for the channel that reselects preferring
Description the first subcell to the databse.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 40

Default Value The default value is dependent upon the actual


Configuration Reason request on site.

The value can be adjusted in accordance with


Configuration Rule and
the actual on-site condition. If the PS traffic in the second subcell
Adjustment Suggestion
is considered as too much, increase the value appropriately.

Change Mode Offline

Related features N/A

Related Parameters N/A

This parameter is valid only when the parameter


Relationship PSALLOCSC_0 is configured as the second subcell preferred or the first
subcell preferred.

Related Interfaces Um

2-1769

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.45.5 RxLev P Value


Full Name RxLev P Value

Abbreviation RxLevP

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the P value of the level after subcell handover
judgment. If P out of N signal strengths meet this threshold, handover is
Description required.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 2

Default Value
Configuration Reason general value

This value of this parameter affects the sensitivity


Configuration Rule and of subcell judgment. The larger the value of this parameter, the lower
Adjustment Suggestion the sensitivity. Usually, it is recommended that the value of this
parameter be not modified.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

2-1770

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.6 RxLev N Value


Full Name RxLev N Value

Abbreviation RxLevN

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the N value of the level after subcell handover
judgment. If P out of N signal strengths meet this threshold, handover is
Description required.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 3

Default Value
Configuration Reason general value

This value of this parameter affects the sensitivity


Configuration Rule and of subcell judgment. The larger the value of this parameter, the lower
Adjustment Suggestion the sensitivity. Usually, it is recommended that the value of this
parameter be not modified.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1771

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.7 TA threshold for PS channel allocate in SubCell1


Full Name TA threshold for PS channel allocate in SubCell1

Abbreviation TaLevelThs1

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the minimum TA threshold when the channel is


allocated on the first subcell.
When the TA value is higher than this threshold, the channel will be
Description allocated to the first subcell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 5

Default Value
Configuration Reason according to general subcell coverage area

The larger the value of this parameter, the


Configuration Rule and harder the operation of allocating the channel to the first subcell.
Adjustment Suggestion When the coverage of the second subcell is good, it is required to
properly increase this value. Otherwise, decrease this value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1772

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.8 TA threshold for PS channel allocate in SubCell2


Full Name TA threshold for PS channel allocate in SubCell2

Abbreviation TaLevelThs2

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum TA threshold when the channel


is allocated on the second subcell.
When the TA value is lower than this threshold, the channel will be
Description allocated to the second subcell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 2

Default Value
Configuration Reason according to general subcell coverage area

The smaller the value of this parameter, the


Configuration Rule and harder the operation of allocating the channel to the second subcell.
Adjustment Suggestion When the coverage of the second subcell is good, it is required to
properly increase this value. Otherwise, decrease this value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1773

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.9 TA P Value
Full Name TA P Value

Abbreviation TaP

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the TAP value for subcell handover judgment. If
Description P out of N TA values meet this threshold, handover is required.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 2

Default Value
Configuration Reason general value

This value of this parameter affects the sensitivity


Configuration Rule and of subcell judgment. The larger the value of this parameter, the lower
Adjustment Suggestion the sensitivity. Usually, it is recommended that the value of this
parameter be not modified.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1774

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.10 TA N Value
Full Name TA N Value

Abbreviation TaN

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the TA N value for subcell handover judgment.


Description If P out of N TA values meet this threshold, handover is required.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 3

Default Value
Configuration Reason general value

This value of this parameter affects the sensitivity


Configuration Rule and of subcell judgment. The larger the value of this parameter, the lower
Adjustment Suggestion the sensitivity. Usually, it is recommended that the value of this
parameter be not modified.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

2-1775

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.11 SubCell1 PS Busy Threshold


Full Name SubCell1 PS Busy Threshold

Abbreviation SubCell1PsChanThs

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the busyness threshold of the first subcell. When
the channel busyness of the first subcell exceeds this threshold, the sys-
Description tem triggers reselection to the second subcell.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

It is required to configure this parameter


Configuration Rule and according to the actual network operation. To hope that the load in
Adjustment Suggestion the first subcell is not excessively high, it is required to properly
lower the busyness threshold.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

2-1776

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.45.12 SubCell2 PS Busy Threshold


Full Name SubCell2 PS Busy Threshold

Abbreviation SubCell2PsChanThs

Managed Object SubCell PS Channel Allocation Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the busyness threshold of the second subcell.


When the channel busyness of the second subcell exceeds this threshold,
Description the system triggers reselection to the first subcell.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason general value

It is required to configure this parameter


Configuration Rule and according to the actual network operation. To hope that the load in
Adjustment Suggestion the second subcell is not excessively high, it is required to properly
lower the busyness threshold.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship None

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->SubCell PS Channel Allocation Configuration

2-1777

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version iBSCV6.20.710c

Parameter Modifying
Detail Update

2.46 Power Control(GPowerControl)


2.46.1 Power Control ID
Full Name Power Control ID

Abbreviation GPowerControl

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Power Control ID

Instance None

Value Range and Step 1..2

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

2-1778

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.46.2 GSubCell DN
Full Name GSubCell DN

Abbreviation refGSubCell

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter references to the subcell DN.

Instance Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason Sub-cell structure is not used by default.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1779

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.3 Uplink level Sample count


Full Name Uplink level Sample count

Abbreviation pcUlLevWindow

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 6

Enough number of samples are needed to ensure


Default Value the correctness of power control decisions. Meanwhile, a handover
Configuration Reason should be conducted as early as possible when the uplink level is
weak.

BTS uses the average value of measurement data to avoid adverse


influences caused by abrupt changes in measurement data due to
Configuration Rule and complex radio transmission.
Adjustment Suggestion The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1780

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.4 Uplink level Weight


Full Name Uplink level Weight

Abbreviation pcUlLevWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, discontinuous transmission (DTX)


refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
This parameter determines the weight for the first type of measurement
data when averaging uplink signal quality for power control. Weight for
Description the second type of measurement data is set to 1 by default.

Instance Cell

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value
Configuration Reason More precise

In the same period, FULL value is calculated from more sampling points
Configuration Rule and
and it is more precise. SUB value is calculated from few sampling points,
Adjustment Suggestion
so it is less precise. This parameter is not recommended to be modified.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

2-1781

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.5 Downlink level Sample count


Full Name Downlink level Sample count

Abbreviation pcDlLevWindow

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the window size (that is, the number of samples)
Description used to calculate the average value of uplink signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 6

Enough number of samples are needed to ensure


Default Value the correctness of power control decisions. Meanwhile, a handover
Configuration Reason should be conducted as early as possible when the uplink level is
weak.

BTS uses the average value of measurement data to avoid adverse


influences caused by abrupt changes in measurement data due to
Configuration Rule and complex radio transmission.
Adjustment Suggestion The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

2-1782

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.6 Downlink level Weight


Full Name Downlink level Weight

Abbreviation pcDlLevWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, discontinuous transmission (DTX)


refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
This parameter determines the weight for the first type of measurement
data when averaging uplink signal quality for power control. Weight for
Description the second type of measurement data is set to 1 by default.

Instance Cell

2-1783

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value
Configuration Reason More precise

In the same period, FULL value is calculated from more sampling points
Configuration Rule and
and it is more precise. SUB value is calculated from few sampling points,
Adjustment Suggestion
so it is less precise. This parameter is not recommended to be modified.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.7 Uplink quality Sample count


Full Name Uplink quality Sample count

Abbreviation pcUlQualWindow

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

2-1784

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 6

Enough number of samples are needed to ensure


Default Value the correctness of power control decisions. Meanwhile, a handover
Configuration Reason should be conducted as early as possible when the uplink level is
weak.

BTS uses the average value of measurement data to avoid adverse


influences caused by abrupt changes in measurement data due to
Configuration Rule and complex radio transmission.
Adjustment Suggestion The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.8 Uplink quality Weight


Full Name Uplink quality Weight

Abbreviation pcUlQualWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the weight for the first type of measurement
data when averaging uplink signal quality for power control.
Description Weight for the second type of measurement data is set to 1 by default.

Instance Cell

2-1785

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value
Configuration Reason More precise

In the same period, FULL value is calculated from more sampling points
Configuration Rule and
and it is more precise. SUB value is calculated from few sampling points,
Adjustment Suggestion
so it is less precise. This parameter is not recommended to be modified.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.9 Downlink quality Sample count


Full Name Downlink quality Sample count

Abbreviation pcDlQualWindow

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description signal strength.

Instance Cell

Value Range and Step 1..31

Unit N/A

2-1786

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 6

Enough number of samples are needed to ensure


Default Value the correctness of power control decisions. Meanwhile, a handover
Configuration Reason should be conducted as early as possible when the uplink level is
weak.

BTS uses the average value of measurement data to avoid adverse


influences caused by abrupt changes in measurement data due to
Configuration Rule and complex radio transmission.
Adjustment Suggestion The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.10 Downlink quality Weight


Full Name Downlink quality Weight

Abbreviation pcDlQualWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines the weight for the first type of measurement
data when averaging downlink signal quality for power control.
Description Weight for the second type of measurement data is set to 1 by default.

Instance Cell

2-1787

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 1..3

Unit N/A

Default Value 2

Default Value
Configuration Reason More precise

In the same period, FULL value is calculated from more sampling points
Configuration Rule and
and it is more precise. SUB value is calculated from few sampling points,
Adjustment Suggestion
so it is less precise. This parameter is not recommended to be modified.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.11 Uplink power control allowed


Full Name Uplink power control allowed

Abbreviation pwrControlUl

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to different demands from the network, object for the power
control can be chosen. If the MS transmission power needs to be adjusted
Description dynamically, enable this parameter Uplink Power Control.

Instance Cell

0: Off
Value Range and Step 1: On

2-1788

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 1

Adjust the output power of MS to make BTS obtain


Default Value
the steady receiving signal strength. Therefore, the interference
Configuration Reason
from the same frequency can be decreased and the power will be saved.

Applicable scenario: decrease uplink interference and MS power


consuming. In environments except for high-speed railway, this function
is recommended to be enabled.
Functions: After the uplink power control is enabled, BTS will obtain the
steady receiving signal strength. Therefore, the uplink interference from
Configuration Rule and the same frequency can be decreased and the MS power consuming
Adjustment Suggestion will be reduced.
Risks: If the uplink power control is not conducted in time, or the
parameter is not configured properly, voice quality problem will be
brought up and call drops will happen.
The initial power control rate for SDR base station is slow. It is
recommended to start fast average (fastavg) function.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters FastAvg

If fastavg function is enabled, the initial


Relationship
power control will speed up.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.12 Downlink power control allowed


Full Name Downlink power control allowed

Abbreviation pwrControlDl

Managed Object Power Control

2-1789

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to different demands from the network, object for the power
control can be chosen. If the BTS transmission power needs to be ad-
Description justed dynamically, enable this parameter Downlink Power Control.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value BTS transmit with the highest power to ensure


Configuration Reason proper coverage and downlink receiving level.

Applicable scenario: decrease downlink interference and BTS power


consuming. This function is recommended to be enabled in the
dense-populated area and places with strong inner network signal
interference.
Functions: After the downlink power control is enabled, an MS will
obtain the steady receiving signal strength. Therefore, the downlink
Configuration Rule and
interference from the same frequency can be decreased and the BTS
Adjustment Suggestion
power consuming will be reduced.
Risks: If the downlink power control is not conducted in time, or the
parameter is not configured properly, voice quality problem will be
brought up and call drops will happen.
The initial power control rate for SDR base station is slow. It is
recommended to start fast average (fastavg) function.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters FastAvg


PwrDynShare

1. Open the fastavg function to speed up the power control;


Relationship 2.If the BTS type is SDR and the "downlink power control"needs to be
enabled, choose "Yes" to make this parameter configurable.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

2-1790

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.13 Increase step of uplink power control


Full Name Increase step of uplink power control

Abbreviation pwrIncStep

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the power increasing step. It is the value of each
power control variation, and is used in both directions uses this parameter.
In addition, it falls into the following four types: FR, HR, AMR FR, and
Description AMR HR.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit dB

Default Value [1,1,1,1,1,1,1]

Default Value The principle of quick increase and slow decrease


Configuration Reason is followed.

If this parameter is configured too small,


Configuration Rule and the uplink power increases slowly. As a result, the voice quality
Adjustment Suggestion is deteriorated or even call drops occur. Therefore, it is recommended
that the value be not configured too small.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1791

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version iBSCV6.20.710e

Parameter Modifying
Detail Update

2.46.14 Decrease step of uplink power control


Full Name Decrease step of uplink power control

Abbreviation pwrRedStep

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the power decreasing step. It is the value of


each power control variation, and is used in both directions uses this pa-
rameter. In addition, it falls into the following four types: FR, HR, AMR
Description FR, and AMR HR.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit dB

Default Value [0,0,0,0,0,0,0]

Default Value The principle of quick increase and slow decrease


Configuration Reason is followed.

If this parameter is configured too large,


Configuration Rule and
the uplink power may be decreased sharply in some special cases. As
Adjustment Suggestion
a result, the KPIs such as call drop will be affected.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1792

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version iBSCV6.20.710e

Parameter Modifying
Detail Update

2.46.15 Increase uplink level Threshold


Full Name Increase uplink level Threshold

Abbreviation pcUlInclLevThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power increased in the
uplink direction. If P out of N recent uplink signal strength averages are
lower than the related thresholds, the uplink transmission power of MS
Description should be increased, because the strength of uplink signals is too weak.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [22,22,22,22,22,22,22]

Under the general scenario, when the uplink level is 88 dbm~-80 dbm,
Default Value
the signal strength is able to ensure normal CS, and does not bring
Configuration Reason
about uplink interference.

If this threshold is configured too low, the


uplink receiving strength is weak but the power is not controlled.
In this case, it is easy to cause poor voice quality or call drop.
Configuration Rule and
If the threshold is configured too high, the uplink interference will
Adjustment Suggestion
increase. In the case of weak indoor coverage, it is recommended that
this threshold be properly increased to avoid poor voice quality caused
by rapid signal attenuation.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

2-1793

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.16 Decrease uplink level Threshold


Full Name Decrease uplink level Threshold

Abbreviation pcUlRedLevThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power decreased in
the uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be decreased, because the
Description strength of uplink signals is too strong.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [30,30,30,30,30,30,30]

Under the general scenario, when the uplink level is 88dbm~-80dbm,


Default Value
the signal strength is able to ensure normal CS, and does not bring
Configuration Reason
about uplink interference

2-1794

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If this threshold is configured too low, the


MS power will be decreased when the uplink receiving strength is weak.
If this threshold is configured too high, the uplink receiving strength
Configuration Rule and
is too strong but the power lowering will not be decreased. In this
Adjustment Suggestion
case, interference exists. In the case of weak indoor coverage, it
is recommended that this threshold be properly increased to avoid
poor voice quality caused by rapid signal attenuation.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.17 Increase uplink quality Threshold


Full Name Increase uplink quality Threshold

Abbreviation pcUlInclQualThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power increased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be increased, because the
Description strength of uplink signals is too weak.

Instance Cell

2-1795

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0..7

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value Under the general scenario, the signal quality (0 to 2) is able to ensure
Configuration Reason CS voice quality.

If this threshold is configured too high, call drop occurs because the
receiving quality is too poor, and downlink RQ ratio is influenced.
If this threshold is configured too low, MS' power increases resulting
from a slight interference, and the interference increases.
The quality threshold can be changed in accordance with the
uplink/downlink radio environment. It can be adjusted as 0, 1when
Configuration Rule and
the radio environment is poor. The transmission power of uplink signals
Adjustment Suggestion
increases and mutual interference increases with the improvement of
quality threshold. The ratio of networtk performance index RQ=03
and the power increases because of power control. Therefore, when
this parameter is set or optimized, it needs to keep a balance among
the network performance index (RQ=0~3%) improvement, power
incremenet, and interferemce increment.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.18 Decrease uplink quality Threshold


Full Name Decrease uplink quality Threshold

Abbreviation pcUlRedQualThs

Managed Object Power Control

2-1796

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power decreased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal quality averages are lower than the related thresholds, the
uplink transmission power of MS should be decreased, because the
Description quality of uplink signals is too good.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [0,0,0,0,0,0,0]

Default Value Under the general scenario, the signal quality (0 to 2) is able to ensure
Configuration Reason CS voice quality.

If this value is adjusted excessively, the


Configuration Rule and power will not increase if the interference exists and call drops
Adjustment Suggestion occur due to poor quality. Therefore, it is recommended that this
value be not modified.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1797

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.19 Increase downlink level Threshold


Full Name Increase downlink level Threshold

Abbreviation pcDlInclLevThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power increased in the
downlink direction. If P out of N recent downlink signal strength averages
are lower than the related thresholds, the downlink transmission
power of the BTS should be increased, because the downlink signals
Description are too weak.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [32,32,32,32,32,32,32]

Default Value Under the general scenario, when the level is 84dbm~-76dbm dbm, the
Configuration Reason signal strength is able to ensure normal CS.

If this threshold is configured too low, the


receiving strength of the MS is weak but the power is not controlled.
If the threshold is configured too high, the downlink interference
will increase. For the sites that have requirements on the downlink
Configuration Rule and coverage level, increase the threshold of downlink power control
Adjustment Suggestion according
to the coverage requirements. For example, for the sites that have
requirements on the downlink -75dBm coverage, it is recommended that
the threshold for downlink power increase or decrease be changed to
36 or 42 respectively.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1798

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.20 Decrease downlink level Threshold


Full Name Decrease downlink level Threshold

Abbreviation pcDlRedLevThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power decreased
in the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description decreased, because the downlink signals are too strong.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [42,42,42,42,42,42,42]

Default Value Under the general scenario, when the level is 84dbm~-76dbm dbm, the
Configuration Reason signal strength is able to ensure normal CS.

If this threshold is configured too low, the


receiving strength of the MS is weak but the power is not controlled.
If the threshold is configured too high, the downlink interference
will increase. For the sites that have requirements on the downlink
Configuration Rule and coverage level, increase the threshold of downlink power control
Adjustment Suggestion according
to the coverage requirements. For example, for the sites that have
requirements on the downlink -75dBm coverage, it is recommended that
the threshold for downlink power increase or decrease be changed to
36 or 42 respectively.

2-1799

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.21 Increase downlink quality Threshold


Full Name Increase downlink quality Threshold

Abbreviation pcDlInclQualThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power increased in
the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description increased, because the downlink signals are too weak.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [1,1,1,1,1,1,1]

Default Value Under the general scenario, the signal quality (0 to 2) is able to ensure
Configuration Reason CS voice quality.

2-1800

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

If this threshold is configured too high, call drop occurs because the
receiving quality is too poor, and downlink RQ ratio is influenced.
If this threshold is configured too low, MS' power increases resulting
from a slight interference, and the interference increases.
The quality threshold can be changed in accordance with the
uplink/downlink radio environment. It can be adjusted as 0, 1when
Configuration Rule and
the radio environment is poor. The transmission power of uplink signals
Adjustment Suggestion
increases and mutual interference increases with the improvement of
quality threshold. The ratio of networtk performance index RQ=03
and the power increases because of power control. Therefore, when
this parameter is set or optimized, it needs to keep a balance among
the network performance index (RQ=0~3%) improvement, power
incremenet, and interferemce increment.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.22 Decrease downlink quality Threshold


Full Name Decrease downlink quality Threshold

Abbreviation pcDlRedQualThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1801

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter falls into the following seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power decreased
in the downlink direction. The judge process is as follows: If P out of
N recent downlink signal quality averages are lower than the related
thresholds, the downlink transmission power of the BTS should be
Description decreased, because the downlink signals are too good.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [0,0,0,0,0,0,0]

Default Value Under the general scenario, the signal quality (0 to 2) is able to ensure
Configuration Reason CS voice quality.

If this value is adjusted excessively, the


Configuration Rule and power will not increase if the interference exists and call drops
Adjustment Suggestion occur due to poor quality. Therefore, it is recommended that this
value be not modified.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.23 Increase uplink level Value P


Full Name Increase uplink level Value P

Abbreviation pcUlInclLevP

2-1802

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power increased in the
uplink direction. If P out of N recent uplink signal strength averages are
lower than the related thresholds, the uplink transmission power of MS
Description should be increased, because the strength of uplink signals is too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.24 Increase uplink level Value N


Full Name Increase uplink level Value N

2-1803

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation pcUlInclLevN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power increased in the
uplink direction. If P out of N recent uplink signal strength averages are
lower than the related thresholds, the uplink transmission power of MS
Description should be increased, because the strength of uplink signals is too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1804

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.25 Increase downlink level Value P


Full Name Increase downlink level Value P

Abbreviation pcDlInclLevP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power increased in the
downlink direction. If P out of N recent downlink signal strength averages
are lower than the related thresholds, the downlink transmission power
of the BTS should be increased, because the downlink signals are too
Description weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1805

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.26 Increase downlink level Value N


Full Name Increase downlink level Value N

Abbreviation pcDlInclLevN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power increased in the
downlink direction. If P out of N recent downlink signal strength averages
are lower than the related thresholds, the downlink transmission power
of the BTS should be increased, because the downlink signals are too
Description weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1806

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.27 Decrease uplink level Value P


Full Name Decrease uplink level Value P

Abbreviation pcUlRedLevP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power decreased in
the uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be decreased, because the
Description strength of uplink signals is too strong.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1807

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.28 Decrease uplink level Value N


Full Name Decrease uplink level Value N

Abbreviation pcUlRedLevN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power decreased in
the uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be decreased, because the
Description strength of uplink signals is too strong.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1808

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.29 Decrease downlink level Value P


Full Name Decrease downlink level Value P

Abbreviation pcDlRedLevP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power decreased in
the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description decreased, because the downlink signals are too strong.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1809

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.30 Decrease downlink level Value N


Full Name Decrease downlink level Value N

Abbreviation pcDlRedLevN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power decreased in
the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description decreased, because the downlink signals are too strong.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1810

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.31 Increase uplink quality Value P


Full Name Increase uplink quality Value P

Abbreviation pcUlInclQualP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power increased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be increased, because the
Description strength of uplink signals is too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1811

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.32 Increase uplink quality Value N


Full Name Increase uplink quality Value N

Abbreviation pcUlInclQualN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power increased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be increased, because the
Description strength of uplink signals is too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1812

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.33 Increase downlink quality Value P


Full Name Increase downlink quality Value P

Abbreviation pcDlInclQualP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power increased in
the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description increased, because the downlink signals are too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1813

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.34 Increase downlink quality Value N


Full Name Increase downlink quality Value N

Abbreviation pcDlInclQualN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power increased in
the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description increased, because the downlink signals are too weak.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1814

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.35 Decrease uplink quality Value P


Full Name Decrease uplink quality Value P

Abbreviation pcUlRedQualP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power decreased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal quality averages are lower than the related thresholds, the
uplink transmission power of MS should be decreased, because the
Description quality of uplink signals is too good.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1815

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.36 Decrease uplink quality Value N


Full Name Decrease uplink quality Value N

Abbreviation pcUlRedQualN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
quality is one of the factors that may lead to MS power decreased in the
uplink direction. The judge process is as follows: If P out of N recent
uplink signal quality averages are lower than the related thresholds, the
uplink transmission power of MS should be decreased, because the
Description quality of uplink signals is too good.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1816

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.37 Decrease downlink quality Value P


Full Name Decrease downlink quality Value P

Abbreviation pcDlRedQualP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the following seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power decreased in the
downlink direction. The judge process is as follows: If P out of N recent
downlink signal quality averages are lower than the related thresholds,
the downlink transmission power of the BTS should be decreased,
Description because the downlink signals are too good.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1817

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.38 Decrease downlink quality Value N


Full Name Decrease downlink quality Value N

Abbreviation pcDlRedQualN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter falls into the following seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Downlink receiving
quality is one of the factors that may lead to BTS power decreased in the
downlink direction. The judge process is as follows: If P out of N recent
downlink signal quality averages are lower than the related thresholds,
the downlink transmission power of the BTS should be decreased,
Description because the downlink signals are too good.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value The accuracy and sensitivity of the power control


Configuration Reason should be guaranteed.

Configuration Rule and If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion the preciseness. However the sensitivity will be lowered.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1818

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.39 MAX power level of MS


Full Name MAX power level of MS

Abbreviation msTxPwrMax

Managed Object Power Control

3GPP Name MS_TXPWR_MAX_CCH

3GPP Reference 3GPP TS 45.008

During the communication between the MS and the BTS, the


transmission power is controlled by the network. The network sets
the power for MS through the power command and the command is
transmitted on SACCH (SACCH has 2 header bytes, one is the power
control byte and the other is the timing advance byte).
MS must extract the power control header from downward SACCH and
takes the specified transmission power as output power. If the power
level of MS cannot output the power value, it will output the closest
transmission power that can be output. During BSC power control, this
parameter determines the maximum transmission power available for
MS in the cell. BSC also uses it to calculate PBGT value. The maximum
power level of the MS falls into the following types: FR, HR, AMR FR,
Description and AMR HR.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value [5,5,5,5,5,5,5]

Default Value This is to maximize the initial transmission


Configuration Reason power of the MS.

The weak uplink receiving power level will impact the TCH and the
Configuration Rule and success ratio of SD designation.
Adjustment Suggestion When the radio environment is good, MS normal access can be ensured
even if the parameter is set lower.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1819

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.40 MIN power level of MS


Full Name MIN power level of MS

Abbreviation msTxPwrMin

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

During the communication between the MS and the BTS, the


transmission power is controlled by the network. The network sets
the power for MS through the power command and the command is
transmitted on SACCH (SACCH has 2 header bytes, one is the power
control byte and the other is the timing advance byte).
The MS must extract the power control header from downward SACCH
and takes the specified transmission power as output power. If the
power level of MS cannot output the power value, it will output the
closest transmission power that can be output. When BSC is performing
power control, this parameter is the minimal transmission power (that
is, lower limit of power control) that can be used by MS in the cell. The
minimum power level of the MS falls into the following four types: FR,
Description HR, AMR FR, and AMR HR.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value [16,16,16,16,16,16,16]

Default Value The uplink level and the MS power consumption


Configuration Reason are ensured simultaneously.

If this parameter is set too low, the uplink receiving power will be weak;
if it is set too high, MS transmission power will be high and the uplink
Configuration Rule and
interference will be brought up.
Adjustment Suggestion
This parameter should be set higher to ensure the uplink receiving
signal strength.

2-1820

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.41 MIN power level of BS


Full Name MIN power level of BS

Abbreviation bsTxPwrMin

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

During the communication between the MS and the BTS, the


transmission power is controlled by the network. The network sets
the power for the BTS through the power command. The BTS must
take the transmittion power stipulated by the power command as the
output power. During BSC power control, this parameter is the minimal
transmission power used by the BTS in a cell.
If the maximum transmission power of the BTS is Pn, then:
l 0Pn
l 1Pn-2 dB
....
Description l 15Pn-30 dB

Instance Cell

Value Range and Step 0..15

Unit N/A

Default Value [10,10,10,10,10,10,10]

2-1821

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value The BTS power is adjusted within a high power


Configuration Reason range.

This parameter indicates the range of power


Configuration Rule and
adjustment for the BTS. A high value does not help reduce the downlink
Adjustment Suggestion
network interference.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.42 Uplink rapid power control


Full Name Uplink rapid power control

Abbreviation ulRapidPcInd

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the availability of the rapid power control


process. The rapid power control process is an optional process of BSC.
It reduces the interference of the whole BSS radio system and satisfies
the dynamic power control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
Description parameter power control step (increase and decrease).

Instance Cell

0: Off
Value Range and Step 1: On

2-1822

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value MS power can be adjusted quickly to reduce


Configuration Reason interference. Then BTS can get a steady level.

Configuration principle: The configuration


can be adjusted based on the real-time receiving signal level and
the value difference between quality and the expected threshold. This
Configuration Rule and
power control mode can meet the needs of dynamic power control for
Adjustment Suggestion
rapid moving MS. However, it will cause the transmission power for
BTS or MS to adjust too quickly, which will result in unsteady receiving
signals.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.43 Downlink rapid power control


Full Name Downlink rapid power control

Abbreviation dlRapidPcInd

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1823

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the availability of the rapid power control


process. The rapid power control process is an optional process of BSC.
It reduces the interference of the whole BSS radio system and satisfies
the dynamic power control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
Description parameter power control step (increase and decrease).

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Default Value Enabling downlink rapid power control is likely


Configuration Reason to cause the deterioration of RQ.

This power control mode can meet the needs


Configuration Rule and of dynamic power control for rapid moving MS. However, it will cause
Adjustment Suggestion the BTS transmission power to adjust too quickly, which will result
in unsteady receiving signals.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.44 MIN interval of power control


Full Name MIN interval of power control

Abbreviation pcMinInterval

2-1824

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the minimum interval of power control. Usually,


MS still sends two measurement reports with the original power to BSC
after enabling the power control. Signal level information contained in the
reports is inaccurate and can be ignored (information such as adjacent
cell information is still valid). Thus a minimum interval of power control is
Description needed and signal level information during the interval can be ignored.

Instance Cell

Value Range and Step 1..32

Unit N/A

Default Value [2,2,2,2,2,2,2]

SDR base station will abandon the wrong measurement reports and
Default Value ensure the correctness of power control.
Configuration Reason V3 base station will at the same time ensure the correctness of power
control and the speed of initial power control.

For the SDR base station, two inaccurate measurement reports are
Configuration Rule and discarded between two uplink power controls. It is recommended not
Adjustment Suggestion to modify this parameter.
For V base station, it is also recommended not to modify this parameter.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version iBSCV6.20.710e

Parameter Modifying
Detail Update

2-1825

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.45 Power control PwrDecrLimit


Full Name Power control PwrDecrLimit

Abbreviation pwrDecrLimit

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter is set for preventing MS from call drop due to fast
power control. It corresponds to different quality levels. For example,
PwrDecrLimit [0] determines the maximum power decrease limit for
calls with receiving quality level 0 (Bit Error rate (BER) <0.2%). This
Description parameter is valid for both uplink and downlink.

Instance Cell

Value Range and Step 0..38

Unit N/A

Default Value [24,22,20,18,16,14,12,10]

When the rapid power control is conducted,


Default Value
get the middle value to ensure the speed and to prevent the power
Configuration Reason
from decreasing too quickly.

If the value adjusted higher, the power changing


Configuration Rule and amplitude becomes bigger and there will risks of call drops; if the
Adjustment Suggestion value is adjusted lower, the power changing sensitivity will be smaller
and the impact of power control will be reduced.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1826

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.46 Report period of measurement for power control


Full Name Report period of measurement for power control

Abbreviation pwrCtrlReportPrd

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

Power control is performed at BTS side and BSC implements relevant


performance statistics. BTS uses this parameter to decide the periodicity
to send the preprocessed power measurement to BSC as an input for
power control analysis. This parameter is in the unit of SACCH multi-
Description frame.

Instance Cell

Value Range and Step 1..254

Unit 51 mf

Default Value 240

Default Value BTS will report the control performance measurement


Configuration Reason result each 240 51-double frames or 26 double frames.

The default value should be applied. This parameter


Configuration Rule and
controls the frequency of power performance measurement report from
Adjustment Suggestion
BTS to iBSC.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1827

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.47 BCCH power control downlink


Full Name BCCH power control downlink

Abbreviation BCCHPwrControlDL

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to implement power control for the ded-
icated channel on the BCCH carrier according to various network require-
Description ments.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Downlink power control is not implemented for


Default Value
the BCCH carrier, so as to ensure that the MS can correctly measure
Configuration Reason
the downlink level of this cell.

Whether to enable this parameter is determined by users. Enabling this


Configuration Rule and parameter reduces the power consumption of BTS, the downlink level
Adjustment Suggestion measured in this cell decreases. Consequently, the reselection, and the
handover judgement at the network side are influenced.

Change Mode Offline

Related features ZGO-04-04-00 BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1828

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.48 BCCH maxim power decrease


Full Name BCCH maxim power decrease

Abbreviation BCCHMaxPwrDec

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

When the BCCH carrier participates in the downlink power control, this
parameter determines the maximum deteriorated value of the dedicated
Description channel on the BCCH carrier.

Instance Cell

Value Range and Step 0..60

Unit 0.5db

Default Value 6

The value of this parameter defines the range


Default Value of downlink BCCH power control. As a caution, this parameter is
Configuration Reason configured
to 3 dB.

The value is valid only when the downlink power control on BCCH
Configuration Rule and
carrier is enabled. If the value is configured too large, the downlink level
Adjustment Suggestion
measured in this cell and adjacent cells is too low.

Change Mode Offline

Related features ZGO-04-04-00 BCCH

Related Parameters BCCHPwrControlDL

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1829

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.49 BCCH idle burst power


Full Name BCCH idle burst power

Abbreviation BCCHIdleBurstPwr

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to decrease the output power of idle


Description timeslots on the BCCH carrier according to various network requirements.

Instance Cell

0:Not to cut power output


1:0.5Db
2:1Db
3:1.5Db
4:2Db
5:2.5Db
6:3Db
7:3.5Db
8:4Db
9:4.5Db
10:5Db
11:5.5Db
12:6Db
13:6.5Db
14:7Db
15:7.5Db
16:8Db
17:8.5Db
18:9Db
19:9.5Db
20:10Db
21:10.5Db
22:11Db
23:11.5Db
24:12Db
25:12.5Db
26:13Db
27:13.5Db
28:14Db
29:14.5Db
30:15Db
31:15.5Db
Value Range and Step
32:16Db

2-1830

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

33:16.5Db
34:17Db
35:17.5Db
36:18Db
37:18.5Db
38:19Db
39:19.5Db
40:20Db
41:20.5Db
42:21Db
43:21.5Db
44:22Db
45:22.5Db
46:23Db
47:23.5
48:24Db
49:24.5Db
50:25Db
51:25.5Db
52:26Db
53:26.5Db
54:27Db
55:27.5Db
56:28Db
57:28.5Db
58:29Db
59:29.5Db
60:30Db
61:(Turn off power)

Unit N/A

Default Value 0

Do not decrease the output power of idle timeslots


Default Value
on the BCCH carrier, so as to ensure correct measurement on the level
Configuration Reason
of this cell.

Whether to reduce the output power in idle slots of BCCH carrier is


determined by users, to reduce the power consumption of BTS.
Configuration Rule and
If the value is configured too large, the downlink level measured in
Adjustment Suggestion
this cell is too low. Consequently, the reselection, and the handover
judgement at the network side are influenced.

Change Mode Offline

Related features ZGO-04-04-00 BCCH

Related Parameters N/A

2-1831

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.50 Uplink exponential filter


Full Name Uplink exponential filter

Abbreviation ULExpFilter

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to process the uplink level and qual-
ity through exponential filtering during uplink power control and use the
Description processed data for uplink power control judgment.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Exponential filtering has good effect on eliminating


Default Value
burr. The disadvantage is that is cannot adapt to sharp fluctuation
Configuration Reason
of radio environments. By default, this function is disabled.

After the exponential filtering function is


enabled, the impact of the latest measurement samples will be
Configuration Rule and
weakened,
Adjustment Suggestion
which helps prevent power control jitter. However, the sensitivity
of power control is also decreased.

Change Mode Offline

Related features ZGO-04-02-018

2-1832

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.51 Downlink exponential filter


Full Name Downlink exponential filter

Abbreviation DLExpFilter

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to process the downlink level and


quality through exponential filtering during downlink power control and
Description use the processed data for downlink power control judgment.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

Exponential filtering has good effect on eliminating


Default Value
burr. The disadvantage is that is cannot adapt to sharp fluctuation
Configuration Reason
of radio environments. By default, this function is disabled.

After the exponential filtering function is


enabled, the impact of the latest measurement samples will be
Configuration Rule and
weakened,
Adjustment Suggestion
which helps prevent power control jitter. However, the sensitivity
of power control is also decreased.

Change Mode Offline

2-1833

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-04-02-018

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.52 Uplink level optimize


Full Name Uplink level optimize

Abbreviation ULLevOptim

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to use the optimized uplink level as the
expected level for uplink power control. The optimized uplink level is a
value between the threshold of uplink power increase and the threshold
Description of uplink power decrease.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

After the optimized uplink level is used as


the expected uplink strength value, the system can prevent extra power
Default Value
control caused by a close value between the target level and the
Configuration Reason
threshold
of power increase or the threshold of power decrease.

Configuration Rule and If this function is enabled, the system can


Adjustment Suggestion prevent ping-pong power control caused by level.

2-1834

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features ZGO-04-02-018

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.53 Downlink level optimize


Full Name Downlink level optimize

Abbreviation DLLevOptim

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicares whether to use the optimized downlink level as


the expected level for downlink power control. The optimized downlink
level is a value between the threshold of downlink power increase and
Description the threshold of downlink power decrease.

Instance Cell

0: Off
Value Range and Step 1: On

Unit N/A

Default Value 0

After the optimized downlink level is used


Default Value as the expected uplink strength value, the system can prevent extra
Configuration Reason power control caused by a close value between the target level and
the threshold of power increase or the threshold of power decrease.

2-1835

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and If this function is enabled, the system can


Adjustment Suggestion prevent ping-pong power control caused by level.

Change Mode Offline

Related features ZGO-04-02-018

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.54 Minimize Interval of downlink power control


Full Name Minimize Interval of downlink power control

Abbreviation DLPcMinInterval

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the minimum interval of power control. Usually,


MS still sends two measurement reports with the original power to BSC
after enabling the power control. Signal level information contained in the
reports is inaccurate and can be ignored (information such as adjacent
cell information is still valid). Thus a minimum interval of power control is
Description needed and signal level information during the interval can be ignored.

Instance Cell

Value Range and Step 1..32

Unit N/A

Default Value [2,2,2,2,2,2,2]

Default Value Incorrect measurement reports will be abandoned


Configuration Reason to ensure correct power control.

2-1836

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and Two incorrect measurement reports are abandoned


Adjustment Suggestion during two times of uplink power control.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.55 Increase step of downlink power control


Full Name Increase step of downlink power control

Abbreviation DLPwrIncStep

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the power increasing step in the downlink direc-
tion. It is the value of downlink power control increase. In addition, it falls
Description into the following four types: FR, HR, AMR FR, and AMR HR.

Instance Cell

1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
Value Range and Step 12: 6dB

Unit N/A

Default Value [8,8,8,8,8,8,8]

2-1837

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

To implement smaller sharing granularity after


the power sharing function is enabled, it is recommended that this
Default Value
parameter be configured to 1 (0.5 dB). If the power sharing function
Configuration Reason
is not enabled, it is recommended that this parameter be configured
to 4 (2 dB).

If this parameter is configured too small,


Configuration Rule and the downlink power increases slowly. As a result, the voice quality
Adjustment Suggestion is deteriorated or even call drops occur. Therefore, it is recommended
that the value be not configured too small.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.56 Decrease step of downlink power control


Full Name Decrease step of downlink power control

Abbreviation DLPwrRedStep

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter indicates the power decreasing step in the downlink di-
rection. It is the value of downlink power control decrease. In addition, it
Description falls into the following four types: FR, HR, AMR FR, and AMR HR.

Instance Cell

2-1838

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
Value Range and Step 12: 6dB

Unit N/A

Default Value [4,4,4,4,4,4,4]

To implement smaller sharing granularity after


the power sharing function is enabled, it is recommended that this
Default Value
parameter be configured to 1 (0.5 dB). If the power sharing function
Configuration Reason
is not enabled, it is recommended that this parameter be configured
to 4 (2 dB).

If this parameter is configured too large,


Configuration Rule and
the downlink power may be decreased sharply in some special cases.
Adjustment Suggestion
As a result, the KPIs such as call drop will be affected.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.57 Urgent Rescue Switch


Full Name Urgent Rescue Switch

Abbreviation UrgentRescueInd

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1839

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to enable the uplink/downlink level


and quality urgent rescue function. The urgent rescue function is optional.
When this function is enabled, power can be rapidly improved when the
level or quality is too low, and thus the proportion of low level and low
Description quality signals is decreased in the entire network.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value To rapidly improve power to guarantee conversation quality when the
Configuration Reason level or quality is too low

Configuration Rule and The urgent rescue function is used to rapidly increase power when the
Adjustment Suggestion level or quality is too low. It is recommended to enable this function.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.58 Uplink Initial State Effectively Switch


Full Name Uplink Initial State Effectively Switch

Abbreviation ULINITStateInd

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1840

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether to enable the initial state function for
uplink power control. The uplink initial state function can rapidly decrease
Description the MS transmitting power and save resources. It is optional.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value To rapidly reduce the transmitting power during the initial phase of a
Configuration Reason conversion, thus reducing the MS power consumption.

The uplink power control initial status function is used to rapidly decrease
Configuration Rule and
the MS's transmitting power and reduce resources. It is recommended
Adjustment Suggestion
to enable this function.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.59 Initial State MR Number


Full Name Initial State MR Number

Abbreviation PcINITMRNum

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1841

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

When the Uplink Initial State Effectively Switch is enabled, the channel
power control status is set to the initial state. Normal power control is
started after one power decrease or the number of measurement reports
Description indicating no power decrease reaches this parameter value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 6

Default Value
Configuration Reason Recommended value from experiments

Configuration Rule and A greater value indicates a longer retention in the initial status if the
Adjustment Suggestion uplink power is no reduced.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.60 High Level High Quality Effectively Switch


Full Name High Level High Quality Effectively Switch

Abbreviation GoodLevBadQuaInd

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1842

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter determines whether to enable the High Level High Quality
Effectively switch. If the switch is enabled, the power is unchanged in the
power control decision in case of high level and high quality. If the switch
Description is disabled, the power is increased in the power control decision.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value The power level should remain unchanged for high-level high-quality
Configuration Reason due to co-frequency interference.

High level and high quality (bad quality) may be caused by co-frequency
Configuration Rule and or adjacent frequency interference. Increasing the power may lead to
Adjustment Suggestion deterioration. It is recommended to enable this function to keep the
power level unchanged.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.61 Uplink Exponential Filter Cycle


Full Name Uplink Exponential Filter Cycle

Abbreviation PcULExpFiltCycleK

Managed Object Power Control

3GPP Name N/A

2-1843

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter is used to calculate the weight (a) of the previous expo-
nential filtering measurement report in the uplink exponential filter algo-
rithm. The weight of the current measurement report is 1-a. If K=0, then
Description a=0; if K>0, then a=1/(2^(PcULExpFiltCycleK/2)).

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 3

Default Value
Configuration Reason Recommended value from experiments

Configuration Rule and A greater value indicates a smaller a value and a higher weight of the
Adjustment Suggestion current measurement report.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.62 Downlink Exponential Filter Cycle


Full Name Downlink Exponential Filter Cycle

Abbreviation PcDLExpFiltCycleK

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1844

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter is used to calculate the weight (a) of the previous ex-
ponential filtering measurement report in the downlink exponential filter
algorithm. The weight of the current measurement report is 1-a. If K=0,
Description then a=0; if K>0, then a=1/(2^(PcULExpFiltCycleK/2)).

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 3

Default Value
Configuration Reason Recommended value from experiments

Configuration Rule and A greater value indicates a smaller a value and a higher weight of the
Adjustment Suggestion current measurement report.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.63 Uplink Window Filter Weight Sequence


Full Name Uplink Window Filter Weight Sequence

Abbreviation PcULWinFiltWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1845

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter sets the weight of the measurement report in the corre-
sponding position when weighedt filter is done in the uplink measurement
report window. PcULWinFiltWeight[0] represents the weight of the fist
measurement report in the window, PcULWinFiltWeight[1] represents the
Description weight of the second measurement report in the window, and so on.

Instance Cell

Value Range and Step 0..32

Unit N/A

Default Value [1,3,5,7,9,11,13,15]

Default Value
Configuration Reason Recommended value from experiments

Configuration Rule and A greater value indicates a higher weight of the window filter of the
Adjustment Suggestion corresponding measurement report in uplink power control.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.64 Downlink Window Filter Weight Sequence


Full Name Downlink Window Filter Weight Sequence

Abbreviation PcDLWinFiltWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1846

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter sets the weight of the measurement report in the corre-
sponding position when weighedt filter is done in the downlink measure-
ment report window. PcDLWinFiltWeight[0] represents the weight of the
fist measurement report in the window, PcDLWinFiltWeight[1] represents
Description the weight of the second measurement report in the window, and so on.

Instance Cell

Value Range and Step 0..32

Unit N/A

Default Value [1,3,5,7,9,11,13,15]

Default Value
Configuration Reason Recommended value from experiments

Configuration Rule and A greater value indicates a higher weight of the window filter of the
Adjustment Suggestion corresponding measurement report in downlink power control.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.65 Uplink Level Urgent Rescue Threshold


Full Name Uplink Level Urgent Rescue Threshold

Abbreviation PcULRescueLevThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1847

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. When the uplink receiving level in the current
measurement report is lower than the threshold, uplink level urgent rescue
Description is implemented.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [20,20,20,20,20,20,20]

Default Value In normal scenarios, if the uplink signal strength is lower than -90 dbm,
Configuration Reason the CS conversation quality may be affected.

A greater value indicates that urgent rescue for uplink level is more
Configuration Rule and
probable to be triggered and the proportion of low levels is decreased in
Adjustment Suggestion
the entire network.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters R_POC.PcUlInclLevThs


R_HOC.HoUlLevThs

R_HOC.HoUlLevThs <= PcULRescueLevThs <= R_POC.PcUlIn-


Relationship
clLevThs;

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.66 Downlink Level Urgent Rescue Threshold


Full Name Downlink Level Urgent Rescue Threshold

Abbreviation PcDLRescueLevThs

Managed Object Power Control

3GPP Name N/A

2-1848

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. When the downlink receiving level in the cur-
rent measurement report is lower than the threshold, downlink level urgent
Description rescue is implemented.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value [25,25,25,25,25,25,25]

Default Value In normal scenarios, if the downlink signal strength is lower than -85
Configuration Reason dbm, the CS conversation quality may be affected.

A greater value indicates that urgent rescue for downlink level is more
Configuration Rule and
probable to be triggered and the proportion of low levels is decreased in
Adjustment Suggestion
the entire network.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters R_POC.PcDlInclLevThs


R_HOC.HoDlLevThs

R_HOC.HoDlLevThs <= PcDLRescueLevThs <= R_POC.PcDlIn-


Relationship
clLevThs;

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.67 Uplink Quality Urgent Rescue Threshold


Full Name Uplink Quality Urgent Rescue Threshold

Abbreviation PcULRescueQualThs

Managed Object Power Control

2-1849

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. When the uplink receiving quality in the cur-
rent measurement report is lower than the threshold, uplink quality urgent
Description rescue is implemented.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value In normal scenarios, if the signal quality is higher than 3, the CS
Configuration Reason conversation quality may be affected.

A greater value indicates that urgent rescue for uplink quality is more
Configuration Rule and
probable to be triggered and the proportion of low levels is decreased in
Adjustment Suggestion
the entire network.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters R_POC.PcUlInclQualThs


R_HOC.HoUlQualThs

1. R_POC.PcUlInclQualThs <= PcULRescueQualThs


Relationship
2. PcULRescueQualThs * 10 <= R_HOC.HoUlQualThs

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version iBSCV6.20.710e

Parameter Modifying
Detail Update

2.46.68 Downlink Quality Urgent Rescue Threshold


Full Name Downlink Quality Urgent Rescue Threshold

Abbreviation PcDLRescueQualThs

2-1850

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. When the downlink receiving quality in the
current measurement report is lower than the threshold, downlink quality
Description urgent rescue is implemented.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value [3,3,3,3,3,3,3]

Default Value In normal scenarios, if the signal quality is higher than 3, the CS
Configuration Reason conversation quality may be affected.

A greater value indicates that urgent rescue for downlink quality is more
Configuration Rule and
probable to be triggered and the proportion of low levels is decreased in
Adjustment Suggestion
the entire network.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters R_POC.PcDlInclQualThs


R_HOC.HoDlQualThs

1. R_POC.PcDlInclQualThs <= PcDLRescueQualThs


Relationship
2. PcDLRescueQualThs * 10 <= R_HOC.HoDlQualThs

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version iBSCV6.20.710e

Parameter Modifying
Detail Update

2.46.69 N of Urgent Rescue


Full Name N of Urgent Rescue

2-1851

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation PcUrgentRescueN

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter is applicable for all voice versions. If among the average
numbers of recent N uplink or downlink receiving level or quality values,
there are P average numbers lower than the corresponding urgent rescue
threshold, the corresponding urgent rescue process is started and the
Description BTS (MS) power is improved.

Instance Cell

Value Range and Step 1..3

Unit N/A

Default Value 3

Default Value
Configuration Reason To guarantee the accuracy and sensitivity of the power control

Greater N and P values indicate that more level samples can be


Configuration Rule and
averaged and higher accuracy can be obtained with burr interference
Adjustment Suggestion
filtered out. However, the sensitivity is decreased.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PcUrgentRescueP

Relationship PcUrgentRescueP <= PcUrgentRescueN

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.70 P of Urgent Rescue


Full Name P of Urgent Rescue

2-1852

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation PcUrgentRescueP

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter is applicable for all voice versions. If among the average
numbers of recent N uplink or downlink receiving level or quality values,
there are P average numbers lower than the corresponding urgent rescue
threshold, the corresponding urgent rescue process is started and the
Description BTS (MS) power is improved.

Instance Cell

Value Range and Step 1..2

Unit N/A

Default Value 2

Default Value
Configuration Reason To guarantee the accuracy and sensitivity of the power control

Greater N and P values indicate that more level samples can be


Configuration Rule and
averaged and higher accuracy can be obtained with burr interference
Adjustment Suggestion
filtered out. However, the sensitivity is decreased.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PcUrgentRescueN

Relationship PcUrgentRescueP <= PcUrgentRescueN

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.71 Uplink Power Reduce Level Margin


Full Name Uplink Power Reduce Level Margin

2-1853

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation PcULRedLevMargin

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. This threshold accomplishes a dynamic
downlink power control decision. It enables the system to adjust power
control direction in different sections. For medium level and low quality, if
the average of the filtered level is lower than " uplink signal for increasing
power+uplink power level margin", the system does not decrease the
power.
The footnotes 0-3 correspond to 0-FR,1-FP, 2-AMR FR, and 3-AMR
Description HR respectively.

Instance Cell

Value Range and Step 0..38

Unit N/A

Default Value [6,6,6,6,6,6,6]

Default Value
Configuration Reason Required by the SDR power control algorithm

A greater value indicates a higher level to cause reduction of uplink


Configuration Rule and power for medium level and low quality signals. It is recommended to
Adjustment Suggestion set this parameter to (uplink signal for decreasing powe - uplink signal
for increasing power)/2

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PcUlRedLevThs


PcUlInclLevThs

Relationship PcULRedLevMargin <= PcUlRedLevThs - PcUlInclLevThs

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

2-1854

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.46.72 Downlink Power Reduce Level Margin


Full Name Downlink Power Reduce Level Margin

Abbreviation PcDLRedLevMargin

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. This threshold accomplishes a dynamic
downlink power control decision. It enables the system to adjust power
control direction in different sections. For medium level and low quality,
if the average of the filtered level is lower than " downlink signal for
increasing power+downlink power level margin", the system does not
decrease the power.
The footnotes 0-3 correspond to 0-FR,1-FP, 2-AMR FR, and 3-AMR
Description HR respectively.

Instance Cell

Value Range and Step 0..38

Unit N/A

Default Value [6,6,6,6,6,6,6]

Default Value
Configuration Reason Required by the SDR power control algorithm

A greater value indicates a higher level to cause reduction of downlink


Configuration Rule and power for medium level and low quality signals. It is recommended to
Adjustment Suggestion set this parameter to (uplink signal for decreasing powe - uplink signal
for increasing power)/2

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PcDlRedLevThs


PcDlInclLevThs

Relationship PcDLRedLevMargin <= PcDlRedLevThs - PcDlInclLevThs

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

2-1855

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.73 Initial State Power Decrease Limit


Full Name Initial State Power Decrease Limit

Abbreviation PcINITDecrLimit

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions.
This parameter sets the uplink power decrease threshold when the
Uplink Initial State Effectively Switch is enabled.
The footnotes 0-3 correspond to 0-FR,1-FP, 2-AMR FR, and 3-AMR
Description HR respectively.

Instance Cell

0:2dB
1:4dB
2:6dB
3:8dB
4:10dB
5:12dB
6:14dB
Value Range and Step 7:16dB

Unit N/A

Default Value [5,5,5,5,5,5,5]

Default Value
Configuration Reason To prevent excessively large initial state power decrease steps.

Configuration Rule and A greater value indicates a larger uplink power change amplitude in
Adjustment Suggestion initial status and greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

2-1856

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.74 Uplink Power Decrease Limit of Quality rank


Full Name Uplink Power Decrease Limit of Quality rank

Abbreviation ULPwrDecrLimit

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the uplink power decrease threshold corresponding


to different quality levels. ULPwrDecrLimit[0] represents the maximum
power decrease value for quality level 0, ULPwrDecrLimit[1] represents
Description the maximum power decrease value for quality level 1, and so on.

Instance Cell

Value Range and Step 0..38

Unit N/A

Default Value [24,22,20,18,16,14,12,10]

Default Value To guarantee the power control speed and prevent rapid power decrease
Configuration Reason in rapid uplink power control, use the middle value.

Configuration Rule and A greater value indicates a larger uplink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

2-1857

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.75 Downlink Power Decrease Limit of Quality rank


Full Name Downlink Power Decrease Limit of Quality rank

Abbreviation DLPwrDecrLimit

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the downlink power decrease threshold correspond-


ing to different quality levels. DLPwrDecrLimit[0] represents the maximum
power decrease value for quality level 0, DLPwrDecrLimit[1] represents
Description the maximum power decrease value for quality level 1, and so on.

Instance Cell

Value Range and Step 0..38

Unit N/A

Default Value [24,22,20,18,16,14,12,10]

Default Value To guarantee the power control speed and prevent rapid power decrease
Configuration Reason in rapid uplink power control, use the middle value.

Configuration Rule and A greater value indicates a larger downlink power change amplitude in
Adjustment Suggestion initial status and greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-1858

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.76 Uplink Power decrease Maximum Step of Quality 0


Full Name Uplink Power decrease Maximum Step of Quality 0

Abbreviation PwrULDecrbyLevStep0

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum uplink power decrease step for quality
Description level 0 in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 1

Default Value
Configuration Reason When the signal quality is 0, set an appropriate large value.

Configuration Rule and A greater value indicates a larger uplink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1859

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.77 Downlink Power decrease Maximum Step of Quality 0


Full Name Downlink Power decrease Maximum Step of Quality 0

Abbreviation PwrDLDecrbyLevStep0

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum downlink power decrease step for qual-
Description ity level 0 in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 1

Default Value
Configuration Reason When the signal quality is 0, set an appropriate large value.

Configuration Rule and A greater value indicates a larger downlink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

2-1860

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2


Full Name Uplink Power decrease Maximum Step of Quality 1 and 2

Abbreviation PwrULDecrbyLevStep1

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum uplink power decrease step for quality
Description level 1 or 2 in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 0

Default Value When the signal quality is 1 or 2, set a not large value to avoid affecting
Configuration Reason CS services.

Configuration Rule and A greater value indicates a larger uplink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PwrULDecrbyLevStep0

Relationship PwrULDecrbyLevStep1 <= PwrULDecrbyLevStep0

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

2-1861

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2


Full Name Downlink Power decrease Maximum Step of Quality 1 and 2

Abbreviation PwrDLDecrbyLevStep1

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum downlink power decrease step for qual-
Description ity level 1 or 2 in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 0

Default Value When the signal quality is 1 or 2, set a not large value to avoid affecting
Configuration Reason CS services.

Configuration Rule and A greater value indicates a larger downlink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters PwrDLDecrbyLevStep0

Relationship PwrDLDecrbyLevStep1 <= PwrDLDecrbyLevStep0

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1862

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.80 Uplink Power decrease Maximum Step of other Quality


Full Name Uplink Power decrease Maximum Step of other Quality

Abbreviation PwrULDecrbyLevStep2

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum uplink power decrease step for quality
Description level 3 or higher in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 0

Default Value When the signal quality is bad, it is recommended to set a low value to
Configuration Reason avoid affecting CS services.

Configuration Rule and A greater value indicates a larger uplink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-001 Dynamic BTS Power Control

Related Parameters PwrULDecrbyLevStep1

Relationship PwrULDecrbyLevStep2 <= PwrULDecrbyLevStep1

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1863

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.81 Downlink Power decrease Maximum Step of other Quality


Full Name Downlink Power decrease Maximum Step of other Quality

Abbreviation PwrDLDecrbyLevStep2

Managed Object Power Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

This parameter sets the maximum downlink power decrease step for qual-
Description ity level 3 or higher in non-rapid power control.

Instance Cell

0: 2dB
1: 4dB
Value Range and Step 2: 6dB

Unit N/A

Default Value 0

Default Value When the signal quality is bad, it is recommended to set a low value to
Configuration Reason avoid affecting CS services.

Configuration Rule and A greater value indicates a larger downlink power change amplitude and
Adjustment Suggestion greater probability of call drops, but higher sensitivity.

Change Mode Offline

Related features ZGO-04-02-002 Dynamic MS Power Control

Related Parameters PwrDLDecrbyLevStep1

Relationship PwrDLDecrbyLevStep2 <= PwrDLDecrbyLevStep1

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1864

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.82 Downlink power control RQ target


Full Name Downlink power control RQ target

Abbreviation DLPCRQTarget

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering target quality

Instance BSC

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason The target quality during power control is 3.

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.83 Downlink power control RQ length


Full Name Downlink power control RQ length

Abbreviation DLFilterRQLenth

Managed Object Power Control

2-1865

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering quality length

Instance BSC

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason Exponential filtering algorithmquality length

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.84 Downlink power control rescue


Full Name Downlink power control rescue

Abbreviation DLPCRescue

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink rescuable power control function switch

Instance BSC

2-1866

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 0:Off 1:On

Unit N/A

Default Value 0

Default Value
Configuration Reason The downlink rescuable power control switch is off.

Configuration Rule and


Adjustment Suggestion Downlink rescuable power control switch

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.85 Downlink power control new filter interval


Full Name Downlink power control new filter interval

Abbreviation DLPCNewFilterInterv

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink new exponential filtering interval

Instance BSC

Value Range and Step 0..12

Unit N/A

Default Value 2

2-1867

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value There is an interval of one measurement report between two power
Configuration Reason control actions.

Configuration Rule and The interval should be larger than or equal to 2. The recommended value
Adjustment Suggestion is 2.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.86 Downlink power control new filter


Full Name Downlink power control new filter

Abbreviation DLPCNewFilter

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink new exponential filtering function switch

Instance BSC

Value Range and Step 0:Off 1:On

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the downlink exponential filtering switch is off.

Configuration Rule and


Adjustment Suggestion 0:Off; 1:On

2-1868

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.87 Downlink power control level weight


Full Name Downlink power control level weight

Abbreviation DLPCLevWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering level weight

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 5

Default Value The exponential filtering function adjusts the transmit power according to
Configuration Reason the level and quality. The level weight is 5%.

Configuration Rule and


Adjustment Suggestion The level weight should be smaller than the quality weight.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1869

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.88 Downlink power control level target


Full Name Downlink power control level target

Abbreviation DLPCLevTarget

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering target level

Instance BSC

0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Value Range and Step dBm 60:-51 ~ -50 dBm 61:-50 ~ -49 dBm 62:-49 ~ -48dBm 63:> -48 dBm

Unit N/A

Default Value 20

2-1870

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason The target level during power control is 20, that is, -90 dBm.

This parameter should be adjusted according to the actual level on site.


Configuration Rule and
It is recommended to set this parameter to a smaller value such as 20
Adjustment Suggestion
and 15.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.89 Downlink power control level length


Full Name Downlink power control level length

Abbreviation DLFilterLevLenth

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Exponential filtering algorithm level length

Instance BSC

Value Range and Step 3..15

Unit N/A

Default Value 3

Default Value
Configuration Reason Exponential filtering algorithmlevel length

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

2-1871

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.90 Downlink power control increase decrease


Full Name Downlink power control increase decrease

Abbreviation DLPCINCDecRation

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering increase and decrease proportion

Instance BSC

Value Range and Step 1..7

Unit N/A

Default Value 3

Default Value The value helps implement fast power increase and slow power decrease
Configuration Reason during power control.

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1872

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.91 Downlink good level bad quality


Full Name Downlink good level bad quality

Abbreviation DLGoodLevBadQua

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Downlink power control disabled due to good level and bad quality function
Description switch

Instance BSC

Value Range and Step 0:Off 1:On

Unit N/A

Default Value 0

Default Value The switch of downlink power control disabled due to good level and bad
Configuration Reason quality is off.

Configuration Rule and Downlink power control disabled due to good level and bad qualityfunction
Adjustment Suggestion switch

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1873

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.92 Uplink power control RQ weight


Full Name Uplink power control RQ weight

Abbreviation ULPCRQWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering quality weight

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 75

Default Value The exponential filtering function adjusts the transmit power according to
Configuration Reason the level and quality. The level weight is 75%.

Configuration Rule and


Adjustment Suggestion The level weight should be smaller than the quality weight.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

2-1874

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.93 Uplink power control RQ target


Full Name Uplink power control RQ target

Abbreviation ULPCRQTarget

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering target quality

Instance BSC

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason The target quality during power control is 3.

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1875

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.46.94 Uplink power control RQ length


Full Name Uplink power control RQ length

Abbreviation ULFilterRQLenth

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering quality length

Instance BSC

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value
Configuration Reason Exponential filtering algorithmquality length

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.95 Uplink power control new filter interval


Full Name Uplink power control new filter interval

Abbreviation ULPCNewFilterInterv

Managed Object Power Control

2-1876

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description Uplink new exponential filtering interval

Instance BSC

Value Range and Step 0..12

Unit N/A

Default Value 3

Default Value There is an interval of two measurement reports between two power
Configuration Reason control actions.

Configuration Rule and The recommended interval is 3 because the MS power control can be
Adjustment Suggestion validated after at least three measurement reports are generated.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.96 Uplink power control new filter


Full Name Uplink power control new filter

Abbreviation ULPCNewFilter

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink new exponential filtering function switch

Instance BSC

2-1877

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step 0:Off 1:On

Unit N/A

Default Value 0

Default Value
Configuration Reason By default, the uplink exponential filtering switch is off.

Configuration Rule and


Adjustment Suggestion 0: Off; 1: On

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.97 Uplink power control level weight


Full Name Uplink power control level weight

Abbreviation ULPCLevWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering level weight

Instance BSC

Value Range and Step 0..100

Unit %

Default Value 6

2-1878

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value The exponential filtering function adjusts the transmit power according to
Configuration Reason the level and quality. The level weight is 6%.

Configuration Rule and


Adjustment Suggestion The level weight should be smaller than the quality weight.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.98 Uplink power control level target


Full Name Uplink power control level target

Abbreviation ULPCLevTarget

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering target level

Instance BSC

2-1879

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Value Range and Step dBm 60:-51 ~ -50 dBm 61:-50 ~ -49 dBm 62:-49 ~ -48dBm 63:> -48 dBm

Unit N/A

Default Value 20

Default Value
Configuration Reason The target level during power control is 20, that is, -90 dBm.

This parameter should be adjusted according to the actual level on site.


Configuration Rule and
It is recommended to set this parameter to a smaller value such as 20
Adjustment Suggestion
and 15.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1880

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.46.99 Uplink power control level length


Full Name Uplink power control level length

Abbreviation ULFilterLevLenth

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering level length

Instance BSC

Value Range and Step 3..15

Unit N/A

Default Value 3

Default Value
Configuration Reason Exponential filtering algorithmlevel length

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.100 Uplink power control increase decrease


Full Name Uplink power control increase decrease

Abbreviation ULPCINCDecRation

Managed Object Power Control

2-1881

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Uplink exponential filtering increase and decrease proportion

Instance BSC

Value Range and Step 1..7

Unit N/A

Default Value 3

Default Value The value helps implement fast power increase and slow power decrease
Configuration Reason during power control.

Configuration Rule and


Adjustment Suggestion The recommended value is 3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.101 Uplink good level bad quality


Full Name Uplink good level bad quality

Abbreviation ULGoodLevBadQua

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Uplink power control disabled due to good level and bad quality function
Description switch

2-1882

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance BSC

Value Range and Step 0:Off 1:On

Unit N/A

Default Value 0

Default Value The switch of uplink power control disabled due to good level and bad
Configuration Reason quality is off.

Configuration Rule and Uplink power control disabled due to good level and bad qualityfunction
Adjustment Suggestion switch

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.102 The different increase downlink level threshold of SAIC


MS and NON-SAIC MS
The different increase downlink level threshold of SAIC MS and NON-SAIC
Full Name MS

Abbreviation pcSaicDlIncLevDif

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1883

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

SAIC MSs feature high receptivity. Their receive sensitivity is higher than
that of ordinary MSs. Therefore, the receive level required is lower than
that of ordinary MSs. This parameter indicates that the difference between
downlink level thresholds of SAIC MSs is lower than that of ordinary MSs
Description when the power increases.

Instance BSC

Value Range and Step 0..4

Unit dB

Default Value 0

Default Value By default, the receive levels of SAIC MSs and ordinary MSs are
Configuration Reason considered the same. No special action is required.

Configuration Rule and This parameter should be adjusted according to the actual conditions
Adjustment Suggestion of SAIC MSs on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.103 The different decrease downlink level threshold of SAIC


MS and NON-SAIC MS
The different decrease downlink level threshold of SAIC MS and NON-SAIC
Full Name MS

Abbreviation pcSaicDlRedLevDif

Managed Object Power Control

3GPP Name N/A

2-1884

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

SAIC MSs feature high receptivity. Their receive sensitivity is higher than
that of ordinary MSs. Therefore, the receive level required is lower than
that of ordinary MSs. This parameter indicates that the difference between
downlink level thresholds of SAIC MSs is lower than that of ordinary MSs
Description when the power decreases.

Instance BSC

Value Range and Step 0..4

Unit dB

Default Value 0

Default Value By default, the receive levels of SAIC MSs and ordinary MSs are
Configuration Reason considered the same. No special action is required.

Configuration Rule and This parameter should be adjusted according to the actual conditions
Adjustment Suggestion of SAIC MSs on site.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.104 Power control new filter para2


Full Name Power control new filter para2

Abbreviation PCNewFilter_2

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

2-1885

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Description Exponential filtering parameter 2 reserved for new functions

Instance BSC

Value Range and Step 0..100

Unit N/A

Default Value 0

Default Value
Configuration Reason It has no meaning temporarily.

Configuration Rule and


Adjustment Suggestion It has no meaning temporarily.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.105 Power control new filter para1


Full Name Power control new filter para1

Abbreviation PCNewFilter_1

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Exponential filtering parameter 1 reserved for new functions

Instance BSC

Value Range and Step 0..100

Unit N/A

2-1886

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason It has no meaning temporarily.

Configuration Rule and


Adjustment Suggestion It has no meaning temporarily.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.106 Downlink rescue quality threshold


Full Name Downlink rescue quality threshold

Abbreviation DLRescueQualThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink rescuable power control quality threshold

Instance BSC

Value Range and Step 0..7

Unit N/A

Default Value 5

Default Value The downlink rescuable power control can be enabled when the current
Configuration Reason quality is lower than the threshold.

2-1887

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion The recommended value is 5.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.107 Downlink rescue level threshold


Full Name Downlink rescue level threshold

Abbreviation DLRescueLevelThs

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink rescuable power control level threshold

Instance BSC

0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~

Value Range and Step -67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~

2-1888

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
dBm 60:-51 ~ -50 dBm 61:-50 ~ -49 dBm 62:-49 ~ -48dBm 63:> -48 dBm

Unit N/A

Default Value 15

Default Value The downlink rescuable power control can be enabled when the current
Configuration Reason level is lower than the threshold.

Configuration Rule and


Adjustment Suggestion The recommended value is 15, that is, -95 dBm.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.46.108 Downlink power control RQ weight


Full Name Downlink power control RQ weight

Abbreviation DLPCRQWeight

Managed Object Power Control

3GPP Name N/A

3GPP Reference N/A

Description Downlink exponential filtering quality weight

Instance BSC

Value Range and Step 0..100

Unit %

2-1889

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 55

Default Value The exponential filtering function adjusts the transmit power according to
Configuration Reason the level and quality. The level weight is 55%.

Configuration Rule and


Adjustment Suggestion The level weight should be smaller than the quality weight.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.47 Power Share(GPwShare)


2.47.1 Power Share ID
Full Name Power Share ID

Abbreviation GPwShare

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

Description Power Share ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

2-1890

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.47.2 Cell enable power dynamic sharing or not


Full Name Cell enable power dynamic sharing or not

Abbreviation pwrDynShare

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the cell enables power dynamic sharing
Description or not.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

2-1891

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

To enable the function of dynamic power sharing


in this cell, enable this switch. This helps increase the usage of
Configuration Rule and cell power resources by sharing unused power of the carriers that
Adjustment Suggestion have small transmit power with the carriers that require large transmit
power. In this way, the maximum transmit power of each carrier is
increased.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters PwrControlDl

This parameter cannot be set to Yes if the downlink power control switch
Relationship is not enabled in the first subcell of this cell, or the first subcell of this
cell is not an SDR base station.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.47.3 Power adjustment methods priority


Full Name Power adjustment methods priority

Abbreviation pwrAdjPriority

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the dynamic power sharing function used. It is


the congextion control method for power congestion. The method that
Description ranks higher takes priority.

Instance Cell

0: Invalid algorithm, no congestion control


1: Outgoing handover of CS services
Value Range and Step 2: Reduce PDTCH power

2-1892

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value [1,2,0,0,0]

Default Value Generally, the power congestion control algorithm should be enabled so
Configuration Reason that power congestion can be relieved immediately.

Performing CS service handover outgoing affects the call quality, and


Configuration Rule and reducing PDTCH power affects PS performance. The subscribers can
Adjustment Suggestion adjust the parameter. Generally, the CS service handover outgoing
function is enabled.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.47.4 Power reserved for present users


Full Name Power reserved for present users

Abbreviation pwrPres

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the reserved power volume, that is, the gain
level with the current used power as the reference. The available values
are 0, 1, 2, 3, and 4, representing gains 0 dB, 0.5 dB, 1 dB, 1.5 dB, and
Description 2 dB.

Instance Cell

2-1893

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0:0
1:0.5
2:1
3:1.5
Value Range and Step 4:2

Unit Db

Default Value 2

Default Value
Configuration Reason By default, the power gain is 1 dB.

Configuration Rule and It is recommended that the default value be


Adjustment Suggestion used.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.47.5 Power Adjusting Threshold


Full Name Power Adjusting Threshold

Abbreviation pwrAdjustThreshold

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the power congestion control threshold. When


BSC detects that the percentage of power occupied by a TS's current
service in RRU to the total power has reached this value, it starts
Description congestion control, such as perform CS outgoing handover.

2-1894

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 50..100

Unit N/A

Default Value 100

Default Value By default, 100% is a value considered as congestion.


Configuration Reason If this parameter is not configured properly, services may be affected.

Configuration Rule and It is recommended that the default value be


Adjustment Suggestion used.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship pwrAdmitThrldPunish < pwrAdmitThreshold < pwrAdjustThreshold

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.47.6 Threshold for Increase 8PSK Power


Full Name Threshold for Increase 8PSK Power

Abbreviation Inc8PskPwrThs

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

2-1895

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter determines whether to increase the power usage


threshold of 8PSK. The value 0 indicates that the threshold is
not allowed to be increased. If the iBSC detects that the value of
R_BTS2.Inc8PskPwrThs is not 0, it indicates that the interval of
increasing or decreasing the 8PSK power on this RRU or this cell in the
RRU exceeds the value of R_BTS2.Inc8PskPwrDelay.
If there are still PDTCH channels for power increase and the
increased power on the RRU does not exceed the value of
R_BTS2.Inc8PskPwrThs,
the system increases the 8PSK power for the PDTCH
channel. If the power on the RRU exceeds the value of
R_BTS2.Inc8PskPwrThs+R_BTS2.Inc8PskPwrHys, the system cancels
Description the power increase this time.

Instance Cell

Value Range and Step 0..100

Unit N/A

Default Value 0

Default Value By default, this function is disabled. Enable


Configuration Reason it as required.

Configuration Rule and This parameter cannot be configured too high,


Adjustment Suggestion so as to avoid power congestion.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters Inc8PskPwrHys,pwrAdjustThreshold

Relationship Inc8PskPwrThs + Inc8PskPwrHys < pwrAdjustThreshold

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-1896

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.47.7 Hysteresis for Increase 8PSK Power


Full Name Hysteresis for Increase 8PSK Power

Abbreviation Inc8PskPwrHys

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to increase the delay of 8PSK


power. If the iBSC detects that the value of R_BTS2.Inc8PskPwrThs
is not 0, it indicates that the interval of increasing or decreasing the
8PSK power on this RRU or this cell in the RRU exceeds the value of
R_BTS2.Inc8PskPwrDelay. If there are still PDTCH channels for power
increase and the increased power on the RRU does not exceed the
value of R_BTS2.Inc8PskPwrThs, the system increases the 8PSK power
for the PDTCH channel. If the power on the RRU exceeds the value of
R_BTS2.Inc8PskPwrThs+R_BTS2.Inc8PskPwrHys, the system cancels
Description the power increase this time.

Instance Cell

Value Range and Step 0..100

Unit N/A

Default Value 20

Default Value The value 20% can generally avoid frequent


Configuration Reason power increase or restoration.

This parameter cannot be configured too low,


Configuration Rule and
so as to avoid frequent power increase or restoration. This parameter
Adjustment Suggestion
cannot be configured too high, so as to avoid power congestion.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters Inc8PskPwrThs,pwrAdjustThreshold

Relationship Inc8PskPwrThs + Inc8PskPwrHys < pwrAdjustThreshold

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

2-1897

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail New

2.47.8 Delay for Increase 8PSK Power


Full Name Delay for Increase 8PSK Power

Abbreviation Inc8PskPwrDelay

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether to increase the delay time of 8PSK


power. If the iBSC detects that the value of R_BTS2.Inc8PskPwrThs
is not 0, it indicates that the interval of increasing or decreasing the
8PSK power on this RRU or this cell in the RRU exceeds the value of
R_BTS2.Inc8PskPwrDelay.
If there are still PDTCH channels for power increase and the
increased power on the RRU does not exceed the value of
R_BTS2.Inc8PskPwrThs, the system increases the 8PSK power for
Description the PDTCH channel.

Instance Cell

Value Range and Step 0, 5..255

Unit s

Default Value 60

Default Value The value 60s can generally avoid frequent


Configuration Reason power increase or restoration.

Configuration Rule and This parameter cannot be configured too low,


Adjustment Suggestion so as to avoid frequent power increase or restoration.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

2-1898

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.47.9 Delay for Resume PDTCH Power


Full Name Delay for Resume PDTCH Power

Abbreviation PdPwrResumeDelay

Managed Object Power Share

3GPP Name N/A

3GPP Reference N/A

Sets the delay time for PDTCH power resume. When the network is in
power congestion, the BSC must wait a period of time before the PDTCH
Description power is resumed.

Instance Cell

Value Range and Step 5..255

Unit s

Default Value 60

Default Value
Configuration Reason The change of channel power occupation is completed in 60 seconds.

Configuration Rule and Generally the default value is applied. If the maximum power on the
Adjustment Suggestion PDTCH channel fluctuates frequently, set this parameter higher.

Change Mode Offline

Related features ZGO-04-01-007 Dynamic Power Sharing

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Power Share

Parameter Modifying
Version iBSCV6.20.710a

2-1899

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail Update

2.48 PS Handover Control(GPsHandoverControl)


2.48.1 PS Handover Control ID
Full Name PS Handover Control ID

Abbreviation GPsHandoverControl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

Description PS Handover Control ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1900

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.2 PS handover support


Full Name PS handover support

Abbreviation handoverSupp

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the cell supports the MS to perform PS


Description handover.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters RlcStateReset


EnablePCCNTrigHO

The service function parameters used by the PS handover are valid until
Relationship
this parameter is enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1901

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.3 ACK of PS handover command


Full Name ACK of PS handover command

Abbreviation hoCommandAck

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether PS HANDOVER COMMAND requires


Description acknowledgement.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.4 Blind transmission support


Full Name Blind transmission support

2-1902

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation blindTransSupp

Managed Object PS Handover Control

3GPP Name Blind Transmission

3GPP Reference 3GPP TS 43.129

This parameter indicates whether the cell supports blind transmission.


The blind transmission means the target cell begins to transmit downlink
Description data before the MS accesses to the cell.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.5 Optimized handover support


Full Name Optimized handover support

Abbreviation optimizeHOSupp

Managed Object PS Handover Control

2-1903

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether optimized handover is supported in


the cell that supports PS handover.
If optimized handover is allowed, it is necessary to decide whether the
service cell and the destination cell have the same NSE and RA. If they
have, then perform optimized handover, and relevant QoS information
is required including PFI, PFT, ABQP, and ARP. Otherwise, perform
Description normal handover.

Instance Cell

0: Not Support
Value Range and Step 1: Support

Unit N/A

Default Value 1

Default Value
Configuration Reason based on field pritical request

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.6 Send handover access in synchronized handover


Full Name Send handover access in synchronized handover

Abbreviation sendAccessSync

2-1904

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object PS Handover Control

3GPP Name PS Handover Access

3GPP Reference 3GPP TS 43.129

This parameter indicates whether the handover access message should


be sent during synchronised handover. After the MS receives the PS
handover message, it performs handover to the channel allocated in the
new cell. For example, the PS HANDOVER COMMAND message carries
Handover Reference, and the MS will send the PS HANDOVER ACCESS
Description message to BSS.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.7 Send handover access in pre-synchronized handover


Full Name Send handover access in pre-synchronized handover

2-1905

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Abbreviation sendAccessPreSync

Managed Object PS Handover Control

3GPP Name PS Handover Access

3GPP Reference 3GPP TS 43.129

This parameter indicates whether the PS HANDOVER ACCESS mes-


sage should be sent during pre-synchronized handover. After the MS
receives the PS handover message, it performs handover to the channel
allocated in the new cell. For example, the PS HANDOVER COMMAND
message carries Handover Reference, and the MS will send the PS HAN-
Description DOVER ACCESS message to BSS.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1906

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.8 Reset RLC


Full Name Reset RLC

Abbreviation rlcStateReset

Managed Object PS Handover Control

3GPP Name RLC_RESET

3GPP Reference 3GPP TS 44.060

This parameter indicates whether the state of RLC should be reset. That
is, the related variables of the RLC layer entity keep the same when the
Description MS performs handover from the source cell to the target cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value
Configuration Reason Holding rlc state is not implementation in PS Handover.

Configuration Rule and Currently, this parameter is displayed only


Adjustment Suggestion and does not need to be adjusted.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1907

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.9 Trigger PS handover by PCCN


Full Name Trigger PS handover by PCCN

Abbreviation enablePCCNTrigHO

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to use PCCN to trigger PS handover.


That is, upon receiving the PCCN Packet Cell Change Notification)
Description messgae sent from the MS, BSC triggers PS handover judgement.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

A PS Handover is triggered by the BSC based on the received


Default Value
measurement reports or initiated by the reception of the Packet Cell
Configuration Reason
Change Notification message from the mobile station.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1908

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.10 Number of zero allowed in AV


Full Name Number of zero allowed in AV

Abbreviation zeroAllowed

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, MS can report to BSS the


measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell .
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description (NCellWindow - the count of 0s).

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 1

Default Value
Configuration Reason experience value

Excessive occurrences of zero indicate that


Configuration Rule and the adjacent cells are of poor signal strength. It is recommended
Adjustment Suggestion to set the value as small as possible, in order to select the adjacent
cell with good signal.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1909

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.11 Uplink power level Sample count


Full Name Uplink power level Sample count

Abbreviation hoUlLevWindow

Managed Object PS Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter is the window size (number of sample values) used to
Description calculate average value of uplink signal intensity.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 12

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

Related features N/A

2-1910

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.12 Downlink power level Sample count


Full Name Downlink power level Sample count

Abbreviation hoDlLevWindow

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of samples used for average calcu-
lation on the downlink signal strength measured during downlink power
Description control judgement.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

In the downlink direction, the measurement


Default Value
report is reported slowly. Therefore, multiple radio modules can report
Configuration Reason
it once.

The larger the value of this parameter, the


more the number of samples required for average calculation and thus
Configuration Rule and the smaller the fluctuation of the average value. However, the sensitivity
Adjustment Suggestion decreases. The smaller the value of this parameter, the less the number
of samples required for average calculation and thus the higher the
sensitivity. However, the fluctuation of the average value is large.

Change Mode Offline

2-1911

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.48.13 Uplink quality Sample count


Full Name Uplink quality Sample count

Abbreviation hoUlQualWindow

Managed Object PS Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC determines whether to perform power


control according to measurement data. BSC uses the average value
of measurement data to avoid adverse influences caused by abrupt
changes in measurement data due to complex radio transmission.
BTS uses this parameter to calculate the window size for the average
value of uplink signal quality, i.e. to calculate the average value of the
Description number of used samples.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 12

Default Value
Configuration Reason experience value

2-1912

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.14 Downlink quality Sample count


Full Name Downlink quality Sample count

Abbreviation hoDlQualWindow

Managed Object PS Handover Control

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (i.e. the number of sample
Description values) used to calculate the average value of downlink signal quality.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

2-1913

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.15 Distance
Full Name Distance

Abbreviation distanceWindow

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of distance (timing advance) between
Description MS and BTS.

Instance Cell

2-1914

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 1..31

Unit N/A

Default Value 4

Default Value
Configuration Reason experience value

Changing the parameter value can impact the


Configuration Rule and sensitivity of the target cell selection by handover decision. The
Adjustment Suggestion neighbor cell is not likely to be chosen as the target cell if the
parameter value is big.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.16 Neighboring cell


Full Name Neighboring cell

Abbreviation ncellWindow

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1915

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

In the GSM system, BSC makes handover decision according to the


measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
Description used to calculate average value of signal intensity for adjacent cells.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

Default Value
Configuration Reason experience value

Changing the parameter value can impact the


Configuration Rule and sensitivity of the target cell selection by handover decision. The
Adjustment Suggestion neighbor cell is not likely to be chosen as the target cell if the
parameter value is big.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.17 Uplink receive level Threshold


Full Name Uplink receive level Threshold

Abbreviation hoUlLevThs

Managed Object PS Handover Control

2-1916

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving strength is one of the
causes for handover. The decision process is as follows: For the latest N
average values of uplink signal strength, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
strength. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 18

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1917

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.18 Uplink receive level Value P


Full Name Uplink receive level Value P

Abbreviation hoUlLevP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving strength is one of the
causes for handover. The decision process is as follows: For the latest N
average values of uplink signal strength, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
strength. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1918

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.19 Uplink receive level Value N


Full Name Uplink receive level Value N

Abbreviation hoUlLevN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving strength is one of the
causes for handover. The decision process is as follows: For the latest N
average values of uplink signal strength, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
strength. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

2-1919

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.20 Downlink receive level Threshold


Full Name Downlink receive level Threshold

Abbreviation hoDlLevThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving strength is one
of the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal strength, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal strength. This parameter (HoUlQua) defines the related
threhold value. The default value of this parameter can be 15 (that is,
-96 dBm~-95 dBm). It should be 3 dB more than the minimum access
level (RxLevAccessMin) of the cell.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 18

2-1920

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.21 Downlink receive level Value P


Full Name Downlink receive level Value P

Abbreviation hoDlLevP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1921

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving strength is one
of the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal strength, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal strength. This parameter (HoUlQua) defines the related
threhold value. The default value of this parameter can be 15 (that is,
-96 dBm~-95 dBm). It should be 3 dB more than the minimum access
level (RxLevAccessMin) of the cell.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1922

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.22 Downlink receive level Value N


Full Name Downlink receive level Value N

Abbreviation hoDlLevN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving strength is one
of the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal strength, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal strength. This parameter (HoUlQua) defines the related
threhold value. The default value of this parameter can be 15 (that is,
-96 dBm~-95 dBm). It should be 3 dB more than the minimum access
level (RxLevAccessMin) of the cell.
Usually the value of "HoUlQualThs" shall be lower than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1923

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.23 Uplink receive quality Threshold


Full Name Uplink receive quality Threshold

Abbreviation hoUlQualThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving quality is one of the
causes for handover. The decision process is as follows: For the latest
N average values of uplink signal quality, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
quality. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 15

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

2-1924

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.24 Uplink receive quality Value P


Full Name Uplink receive quality Value P

Abbreviation hoUlQualP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving quality is one of the
causes for handover. The decision process is as follows: For the latest
N average values of uplink signal quality, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
quality. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

2-1925

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.25 Uplink receive quality Value N


Full Name Uplink receive quality Value N

Abbreviation hoUlQualN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1926

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Uplink receiving quality is one of the
causes for handover. The decision process is as follows: For the latest
N average values of uplink signal quality, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
quality. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1927

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.26 Downlink receive quality Threshold


Full Name Downlink receive quality Threshold

Abbreviation hoDlQualThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving quality is one of
the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal quality, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal quality. Ths parameter (HoUlQual) defines the related
threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 15

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1928

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.27 Downlink receive quality Value P


Full Name Downlink receive quality Value P

Abbreviation hoDlQualP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving quality is one of
the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal quality, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal quality. Ths parameter (HoUlQual) defines the related
threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
(the PcDlInclQualThs parameter in the R_POC tabel) for downlink power
control (increase). That is, perform power control first. If power control
does not work, perform handover. The HoUlQualN parameter defines the
Description related N value. The HoUlQualP parameter defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

2-1929

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.28 Downlink receive quality Value N


Full Name Downlink receive quality Value N

Abbreviation hoDlQualN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink receiving quality is one of
the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal quality, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal quality. Ths parameter (HoUlQual) defines the related
threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
(the PcDlInclQualThs parameter in the R_POC tabel) for downlink power
control (increase). That is, perform power control first. If power control
does not work, perform handover. The HoUlQualN parameter defines the
Description related N value. The HoUlQualP parameter defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

2-1930

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 3

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.29 Uplink receive level of intra-ho Threshold


Full Name Uplink receive level of intra-ho Threshold

Abbreviation intraHoUlLevThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1931

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

According to GSM specifications, handover decisions depend upon


a series of average values obtained. Uplink interference with same
frequency is one of the causes for handover. The decision process is as
follows: For the latest N average values of uplink signal strength, if P
of the N values rise above relevant threshold value, perform handover
to reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be greater than the
threshold for causing uplink power control. The IntraHoUlLevN
parameter defines the related N value. The IntraHoUlLevP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1932

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.30 Uplink receive level of intra-ho Value P


Full Name Uplink receive level of intra-ho Value P

Abbreviation intraHoUlLevP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


a series of average values obtained. Uplink interference with same
frequency is one of the causes for handover. The decision process is as
follows: For the latest N average values of uplink signal strength, if P
of the N values rise above relevant threshold value, perform handover
to reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be greater than the
threshold for causing uplink power control. The IntraHoUlLevN
parameter defines the related N value. The IntraHoUlLevP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1933

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.31 Uplink receive level of intra-ho Value N


Full Name Uplink receive level of intra-ho Value N

Abbreviation intraHoUlLevN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon


a series of average values obtained. Uplink interference with same
frequency is one of the causes for handover. The decision process is as
follows: For the latest N average values of uplink signal strength, if P
of the N values rise above relevant threshold value, perform handover
to reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be greater than the threshold
for causing uplink power control (decrease). The IntraHoUlLevN
parameter defines the related N value. The IntraHoUlLevP parameter
Description defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 7

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

2-1934

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.32 Downlink receive level of intra-ho Threshold


Full Name Downlink receive level of intra-ho Threshold

Abbreviation intraHoDlLevThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink interference with same
frequency is one of the causes for handover. The decision process is as
follows: When the handover condition of downlink quality is satisfied,
for the latest N average values of downlink signal strength, if P of the
N values rise above relevant threshold value, perform handover to
reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be lower than or
equal to the threshold for causing uplink power control (decrease).
The IntraHoUlLevN parameter defines the related N value. The
Description IntraHoUlLevP parameter defines the related P value.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 40

2-1935

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.33 Downlink receive level of intra-ho Value P


Full Name Downlink receive level of intra-ho Value P

Abbreviation intraHoDlLevP

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

2-1936

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink interference with same
frequency is one of the causes for handover. The decision process is as
follows: When the handover condition of downlink quality is satisfied,
for the latest N average values of downlink signal strength, if P of the
N values rise above relevant threshold value, perform handover to
reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be lower than or
equal to the threshold for causing uplink power control (decrease).
The IntraHoUlLevN parameter defines the related N value. The
Description IntraHoUlLevP parameter defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1937

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.34 Downlink receive level of intra-ho Value N


Full Name Downlink receive level of intra-ho Value N

Abbreviation intraHoDlLevN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference 3GPP TS 45.008

According to GSM specifications, handover decisions depend upon a


series of average values obtained. Downlink interference with same
frequency is one of the causes for handover. The decision process is as
follows: When the handover condition of downlink quality is satisfied,
for the latest N average values of downlink signal strength, if P of the
N values rise above relevant threshold value, perform handover to
reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be lower than or
equal to the threshold for causing uplink power control (decrease).
The IntraHoUlLevN parameter defines the related N value. The
Description IntraHoUlLevP parameter defines the related P value.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value
Configuration Reason experience value

The period to submit an uplink measurement


Configuration Rule and report is 20 ms and the period to submit an downlink measurement report
Adjustment Suggestion is 200 ms, so the average value of the uplink is larger than that
of the downlink.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1938

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.35 Rapid handover Threshold


Full Name Rapid handover Threshold

Abbreviation rapidHoThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold fot signal strength. When


the measurement value of the called signal strength is continuously
lower than this threshold, fast fading handover can be performed. The
candidate cell is the special related cell among adjacent cells.
The default value of this parameter can be set to 15 (that is -96 dBm~-95
dBm), same as the level threshold for common handover. RapdiHoN is
a counter value. That is, the numer of times that the measurement value
Description of the called signal strength is continuously lower than the threshold.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 15

Default Value
Configuration Reason experience value

Rapid handover is characterized by fast speed,


Configuration Rule and so the handover threshold should not be too large. MS will move to
Adjustment Suggestion the area with high cell level soon. N value cannot be too large, otherwise
the timeliness of handover judgement will be influenced.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-1939

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.36 Rapid handover Value N


Full Name Rapid handover Value N

Abbreviation rapidHoN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold fot signal strength. When


the measurement value of the called signal strength is continuously
lower than this threshold, fast fading handover can be performed. The
candidate cell is the special related cell among adjacent cells.
The default value of this parameter can be set to 15 (that is -96 dBm~-95
dBm), same as the level threshold for common handover. RapdiHoN is
a counter value. That is, the numer of times that the measurement value
Description of the called signal strength is continuously lower than the threshold.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 4

Default Value
Configuration Reason experience value

Rapid handover is characterized by fast speed,


Configuration Rule and so the handover threshold should not be too large. MS will move to
Adjustment Suggestion the area with high cell level soon. N value cannot be too large, otherwise
the timeliness of handover judgement will be influenced.

Change Mode Offline

Related features N/A

2-1940

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.37 Macro to micro handover Threshold


Full Name Macro to micro handover Threshold

Abbreviation macroMicroHoThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

During macro-micro handover, some parameters shall be used. Tha is,


a signal strength threshold and a counter value. Macro-micro handover
threshold is a value of signal intensity threshold. If the measured signal
intensity of an adjacent micro cell is higher than MacroMicroHoThs
(threshold value) for certain times, then it triggers handover to the
adjacent micro-cell.
In this way, it could move slow moving MS into micro cell layer. The
times can be determined by MacroMicroHoN parameter in each adjacent
cell. The setting of parameter "MacroMicroHoN" in the local micro cell
is related to the local cell size and the standard used in measuring the
Description MS moving speed.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 20

Default Value
Configuration Reason experience value

2-1941

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The higher the threshold is, it is more likely


to perform macro-micro handover. The setting of the parameter
Configuration Rule and
"MacroMicroHoN"
Adjustment Suggestion
in the cell is related to this cell size and the standard used in
measuring the MS moving speed.

Change Mode Offline

Related features ZGO-02-02-001 Handover Between Macro- and Micro-cells

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.38 Macro to micro handover Value N


Full Name Macro to micro handover Value N

Abbreviation macroMicroHoN

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

During macro-micro handover, some parameters shall be used. Tha is,


a signal strength threshold and a counter value. Macro-micro handover
threshold is a value of signal intensity threshold. If the measured signal
intensity of an adjacent micro cell is higher than MacroMicroHoThs
(threshold value) for certain times, then it triggers handover to the
adjacent micro-cell.
In this way, it could move slow moving MS into micro cell layer. The
times can be determined by MacroMicroHoN parameter in each adjacent
cell. The setting of parameter "MacroMicroHoN" in the local micro cell
is related to the local cell size and the standard used in measuring the
Description MS moving speed.

2-1942

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 1..255

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

The higher the threshold is, it is more likely


to perform macro-micro handover. The setting of the parameter
Configuration Rule and
"MacroMicroHoN"
Adjustment Suggestion
in the cell is related to this cell size and the standard used in
measuring the MS moving speed.

Change Mode Offline

Related features ZGO-02-02-001 Handover Between Macro- and Micro-cells

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.39 Max time advance threshold between MS and BTS


Full Name Max time advance threshold between MS and BTS

Abbreviation distanceThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1943

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The distance from the MS to the BTS is also one of the causes for
handover. The decision process is as follows: For the latest N average
values of TA (distance), if P of the N values rises above relevant
threshold value, perform handover.
Description The handover is due to MS being out of the serving range of the cell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 60

Default Value When the TA reaches the maximum TA that the


Configuration Reason cell supports, handover is initiated.

After the distance handover algorithm is enabled,


Configuration Rule and configuration of this parameter is dependent upon the actual requirement.
Adjustment Suggestion Generally, the distance handover algorithm is seldom used, so it is
recommended to reserve the default value.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.40 Distance handover Value P


Full Name Distance handover Value P

Abbreviation distanceP

Managed Object PS Handover Control

3GPP Name N/A

2-1944

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter indicates the value P in the distance handover of PS han-


dover. In the handover, if there are P values of N TA satisfying the han-
dover determination condition, the dstance handover conditions are sat-
Description isfied.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value The purpose is to ensure that the handover can be quickly and correctly
Configuration Reason triggered.

In normal situations, adjust the parameter, which affects the times of


Configuration Rule and handover attempts and implementations. A greater value indicates that
Adjustment Suggestion handovers are more difficult to be performed and the call drop rate is
increased.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.41 Distance handover Value N


Full Name Distance handover Value N

Abbreviation distanceN

Managed Object PS Handover Control

3GPP Name N/A

2-1945

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 45.008

This parameter indicates the value N in the distance handover of PS han-


dover. In the handover, if there are P values of N TA satisfying the han-
dover determination condition, the dstance handover conditions are sat-
Description isfied.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value The purpose is to ensure that the handover can be quickly and correctly
Configuration Reason triggered.

In normal situations, adjust the parameter, which affects the times of


Configuration Rule and handover attempts and implementations. A greater value indicates that
Adjustment Suggestion handovers are more difficult to be performed and the call drop rate is
increased.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.42 PBGT handover Value P


Full Name PBGT handover Value P

Abbreviation pbgtHoP

Managed Object PS Handover Control

3GPP Name N1..N8,P1..P8

2-1946

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference 3GPP TS 45.008

This parameter indicates the values N and P in the PBGT handover of


PS handover. In the handover, if there are P values of PBGT in N PBGT
satisfying the handover determination condition, the PBGT handover con-
Description ditions are satisfied.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.43 PBGT handover Value N


Full Name PBGT handover Value N

Abbreviation pbgtHoN

Managed Object PS Handover Control

2-1947

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N1..N8,P1..P8

3GPP Reference 3GPP TS 45.008

This parameter indicates the values N and P in the PBGT handover of


PS handover. In the handover, if there are P values of PBGT in N PBGT
satisfying the handover determination condition, the PBGT handover con-
Description ditions are satisfied.

Instance Cell

Value Range and Step 1..31

Unit N/A

Default Value 3

Default Value
Configuration Reason experience value

Usually, if the value is too small, times of


Configuration Rule and handover attempts and execution will be influenced. The larger the
Adjustment Suggestion value is, it is more difficult to perform handover, and the higher
the call drop risk is.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.44 MIN interval between inter-cell handover


Full Name MIN interval between inter-cell handover

Abbreviation hoMinInterval

2-1948

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the inter-cell handover, but not common intra-cell or inter-cell
concentric handover. In addition, micro-cell has its own handover policy,
so this parameter is only effective for macro-cell layer and its above layer.
For macro-cell, the Default Value can be 5; for micro-cell, the Default
Description Value can only be 0.

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

The value is to keep the MS from handover to


Configuration Rule and
the original cell. The longer the time is, the longer is the handover
Adjustment Suggestion
to the original cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1949

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.45 Prior layer selecting parameter on signal level/quality


Full Name Prior layer selecting parameter on signal level/quality

Abbreviation layerPriority

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the priority to select and sequence the


candidate cells for handover. Received signal level and signal quality
decides the candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell, then
to those at the same layer, and finally to other adjacent cells;
First hand over to adjacent cells at the same layer of the local cell, then
to those at the upper layer, and finally to other adjacent cells;
All adjacent cells are treated in the same way.
This parameter determines to select one of above three methods.
During handover control process, this parameter has higher priority than
normal adjacent cells.
Value Range:
1 (UPPER_LAYER): adjacent cell at above layer first, same layer
next,other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at same layer first, above layer next,
other adjacent cells finally;
3 (ALL_LAYER): all adjacent cells are same.
Note: In general, micro cell adopts option 1 and macro cell adopts
Description option 2.

Instance Cell

1: UPPER_LAYER
2: SAME_LAYER
Value Range and Step 3: ALL_LAYER

Unit N/A

Default Value 2

Default Value
Configuration Reason experience value

Configuration Rule and Generally, the adjacent cells at the same layer
Adjustment Suggestion take priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-1950

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.46 Handover to same layer other band neighbour cell for


PBGT permitted
Full Name Handover to same layer other band neighbour cell for PBGT permitted

Abbreviation pbgtHoLayerSame

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether it is allowed to perform PBGT handover


Description to the same layer adjacent cell with different frequency band.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason experience value

Configuration Rule and Generally, PBGT handover is performed to the


Adjustment Suggestion same layer or is performed to the adjacent cell with no layer relationship.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-1951

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.47 Handover to neighbour cell with no Layer Relation for


PBGT permitted
Full Name Handover to neighbour cell with no Layer Relation for PBGT permitted

Abbreviation pbgtHoLayerUndefine

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether it is allowed to perform PBGT handover


Description to adjacent cell with no layer relationship.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 1

Default Value
Configuration Reason experience value

Configuration Rule and Generally, PBGT handover is performed to the


Adjustment Suggestion same layer or is performed to the adjacent cell with no layer relationship.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1952

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.48 Handover to upper layer neighbour cell for PBGT permitted


Full Name Handover to upper layer neighbour cell for PBGT permitted

Abbreviation pbgtHoLayerUp

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the PBGT handover to the upper layer
Description adjacent cell is allowed.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason experience value

Configuration Rule and Generally, PBGT handover is performed to the


Adjustment Suggestion same layer or is performed to the adjacent cell with no layer relationship.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

2-1953

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.48.49 Handover to under layer neighbor cell for PBGT permitted


Full Name Handover to under layer neighbor cell for PBGT permitted

Abbreviation pbgtHoLayerLow

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether the PBGT handover to the lower layer
Description adjacent cell is allowed.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason experience value

Configuration Rule and Generally, PBGT handover is performed to the


Adjustment Suggestion same layer or is performed to the adjacent cell with no layer relationship.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1954

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.50 Synchronism
Full Name Synchronism

Abbreviation hoSyncInd

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow synchronous handover in this


cell. If the TA of the target cell obtained by the BSC is equal to that of
the source cell, the synchronous handover can be performed towards the
Description target cell.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason based on field pritical request

Configuration Rule and Synchronization handover is enabled for the


Adjustment Suggestion cell which supports intra-cell handover.

Change Mode Offline

Related features ZGB-02-02-003 Handover Mode

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1955

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.51 Asynchronism
Full Name Asynchronism

Abbreviation hoNSyncInd

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow asynchronous handover


in this cell. If the BSC cannot obtain the TA of the target cell, only
Description asynchronous handover can be performed towards the target cell.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason based on field pritical request

Configuration Rule and Generally, asynchronous handover is enabled


Adjustment Suggestion in the cell.

Change Mode Offline

Related features ZGB-02-02-003 Handover Mode

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1956

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.52 Pseudo-synchronism (HoPatternInd_2)


Full Name Pseudo-synchronism (HoPatternInd_2)

Abbreviation hoFSyncInd

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow asynchronous handover


in this cell. If the MS can calculate the target cell's TA and supports
asynchronous handover, the synchronous handover can be performed
Description towards the target cell.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason based on field pritical request

Configuration Rule and Currently, this function is not supported and


Adjustment Suggestion is disabled.

Change Mode Offline

Related features ZGB-02-02-003 Handover Mode

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1957

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.53 Pre-synchronism (HoPatternInd_3)


Full Name Pre-synchronism (HoPatternInd_3)

Abbreviation hoPSyncInd

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow pre-synchronous handover in


this cell. If the BSC knows the target cell's TA, and the TA is considered
when the handover command is issued, the pre-synchronous handover
Description can be performed.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason based on field pritical request

Configuration Rule and Currently, this function is not supported and


Adjustment Suggestion is disabled.

Change Mode Offline

Related features ZGB-02-02-003 Handover Mode

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1958

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.54 Allow intra-Cell handover attempt due to uplink interference


Full Name Allow intra-Cell handover attempt due to uplink interference

Abbreviation psHoControlIntfUl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow inter-cell handover due to up-


link interference. The value is the 1st bit of the HoControl parameter of
Description DWORD type.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason based on field pritical request

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1959

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.55 Allow intra-Cell handover attempt due to downlink


interference
Full Name Allow intra-Cell handover attempt due to downlink interference

Abbreviation psHoControlIntfDl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow inter-cell handover due to


downlink interference. The value is the 2nd bit of the HoControl parame-
Description ter of DWORD type.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason based on field pritical request

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1960

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.56 Allow standard PBGT handover


Full Name Allow standard PBGT handover

Abbreviation psHoControlPbgt

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates whether to allow standard PBGTPS handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 1

Default Value
Configuration Reason Due to the practical application of the net

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.57 Allow handover due to distance


Full Name Allow handover due to distance

Abbreviation psHoControlDistance

2-1961

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates whether to allow PS handover due to distance.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.58 Allow automatic handover based on traffic


Full Name Allow automatic handover based on traffic

Abbreviation psHoControlLoad

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1962

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether to allow automatic handover based on


traffic. The value is the 5th bit of the HoControl parameter of DWORD
Description type.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The functional Switch, default: close

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.59 Enable rapid handover


Full Name Enable rapid handover

Abbreviation psHoControlRapid

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to allow handover due to rapid level


Description fading.

2-1963

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value
Configuration Reason The handover needs not be enabled in normal situation.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.60 Enable macro to micro handover


Full Name Enable macro to micro handover

Abbreviation psHoControlMacroMicro

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to do the delay waiting in the macro-


Description micro PS handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

2-1964

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value
Configuration Reason The handover needs not be enabled in normal situation.

Configuration Rule and This function is not in commercial use in this version. No modification
Adjustment Suggestion is required.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.61 Enable queue in handover


Full Name Enable queue in handover

Abbreviation queInHo

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether it is allowed to jump the queue in PS


Description handover.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

2-1965

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value There are many target cells for handovers and
Configuration Reason the time interval between handover attempts is short.

Configuration Rule and Enabling this function can relieve channel


Adjustment Suggestion congestions in busy hours.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.62 Enable queue in handover preemption in handover


Full Name Enable queue in handover preemption in handover

Abbreviation preeptInHo

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether it is allowed to preempt the channel


Description occupied by the low-priority user.

Instance Cell

0: not allowed
Value Range and Step 1: allowed

Unit N/A

Default Value 0

Default Value Preemption brings an impact on the low-priority


Configuration Reason user. Usually, the default value can be disabled.

2-1966

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The value can be enabled if you wish the high-priority


Configuration Rule and
user to obtain channels easily during handover, the function can be
Adjustment Suggestion
enabled.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN Yes

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.63 Penalty time for handover failure


Full Name Penalty time for handover failure

Abbreviation hoFailPenalTime

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the penalty time for the target cell if the MS fails
to handover to the target cell. During the penalty time, the priority of in-
ter-cell handoverwithin BSC is reduced. This parameter determines the
Description penalty duration.

Instance Cell

Value Range and Step 1..100

Unit N/A

Default Value 5

Default Value
Configuration Reason experience value

2-1967

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The longer the time is set, the longer is the


Configuration Rule and
penalty on the cell, the longer is the failure of handover to the
Adjustment Suggestion
cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.64 Layer control value for handover on traffic


Full Name Layer control value for handover on traffic

Abbreviation trafficHoLayrCtl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

Layer selecting parameter on service quality handover. This parameter,


together with frequency control value for handover on traffic, decides the
adjacent cells frequency band and layer selected during traffic handover.
When traffic handover condition is satisfied, as for the layer relation,
four choices are available for call selection and candidate cell
arrangement. This parameter decides which choice shall be made.
When implementing traffic-based handover control in traffic process, this
parameter has higher priority than that of adjacent cells.
The values are as follows:
0: N, Not defined;
1: SAME, Adjacent cell and this cell are in the same layer (PBGT
Description handover is possible);

2-1968

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2: UPPER, Adjacent cell is upper layer of this cell (when this cell is
micro-cell);
3: LOWER, Adjacent cell is lower layer of this cell (when this cell is
macro-cell)

Instance Cell

0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
Value Range and Step 3: Lower layer of the home cell

Unit N/A

Default Value 1

Default Value
Configuration Reason normal setting

Usually, handover is performed to the cell


Configuration Rule and
in the same layer. Traffic handover can be performed to the cell in
Adjustment Suggestion
the different layer as needed.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.65 Frequency control value for handover on traffic


Full Name Frequency control value for handover on traffic

Abbreviation trafficHoFreqCtl

Managed Object PS Handover Control

3GPP Name N/A

2-1969

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates the control value of layer for traffic handover,
i.e. which frequency band shall be handed over to.
0: GSM900 frequency band P-GSM (ARFCN = 1 ~ 124)
1: EXT900 frequency band E-GSM (ARFCN = 0 ~ 124, 975 ~ 1023)
2: DCS1800 frequency band DCS1800 (ARFCN = 512 ~ 885)
PCS1900 frequency band PCS1900 (ARFCN = 512 ~ 810)
Description GSM850 frequency band (ARFCN = 128 ~ 251)

Instance Cell

0: GSM900
1: EXT900
2: DCS1800
4: PCS1900
Value Range and Step 7: GSM850

Unit N/A

Default Value 0

Default Value
Configuration Reason based on actual scene setting

Configuration Rule and Setting of the value is dependant on the actual


Adjustment Suggestion circumstances.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1970

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.66 Threshold of traffic for handover


Full Name Threshold of traffic for handover

Abbreviation trafficThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

If TCH occupation rate of a cell is greater than this parameter value (num-
ber of occupied TCH channels / number of total TCH channels, not includ-
ing blocked idle channels), then it indicates the cell is too busy, and traffic
Description handover is triggered for the cell.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 80

Default Value
Configuration Reason experience value

Configuration Rule and The traffic threshold of the cell cannot be


Adjustment Suggestion too high, so as to prevent congestion in the cell.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1971

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.48.67 Traffic handover threshold


Full Name Traffic handover threshold

Abbreviation trafficLevThs

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

This parameter is used for traffic handover during PS services. If the adja-
cent cell' s level is higher than this threshold (that is, RxLevelNcell-Dwlin-
kLevel>=TrafficLevThs), and the adjacent cell's level satisfies its minimum
Description access level, handover can be performed to the adjacent cell.

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 24

If the target cell's level is not lower than


Default Value the serving cell, traffic handover can be performed to balance traffic.
Configuration Reason If this threshold is too high, it is difficult to select a user for
outgoing handover.

When the outgoing handover is prefered to be performed on the cell


with large traffic, the value should be adjusted as small. Otherwise,
Configuration Rule and the value should be adjusted as large.This threshold must be less than
Adjustment Suggestion the PBGT threshold in reverse direction. Otherwise, it may result in
toggle handover.
For the scenario with dense traffic, the value can be reduced properly.

Change Mode Offline

Related features ZGO-02-02-007 Traffic Based Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

2-1972

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.48.68 Level offset during penalty


Full Name Level offset during penalty

Abbreviation penaltyLevOffset

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

When the MS is performing PS services, if the target cell is in the penalty


for handover failure, an offset is made on the downlink level of the target
Description cell.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 15

Generally, the cell in penalty can be no longer


Default Value
ordered in the front of the handover list if other adjacent cells
Configuration Reason
with good signal are available.

If many adjacent cells to which handover can


Configuration Rule and
be performed are available, the value should be large. Otherwise,
Adjustment Suggestion
the value should be small.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

2-1973

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.48.69 Uplink interference quality offset


Full Name Uplink interference quality offset

Abbreviation qoffSetUl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

The value is 0~6, and the quality offset is -3~3. The uplink receiving
quality is poor during PS services, and the level is high. Consequently,
the MS camps on the interference area predefined. Uplink interference
handover can be performed if AvRxQualUL(s)<InterfFQSS(s). Where,
AvRxQualUL(s) is the average uplink bit error rate (MEAN_BEP),
InterfFQSS(s) is the bit error rate threshold FQSS calculated by the
average uplink level AvRxLevUL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+7 if XOffset+30<=AvRxLevUL(s)<XOffset+40
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
Where, XOffset and YOffset respectively represent the level offset
(SOffSetUl) and quality offset (QOffSetUl) of uplink interference
Description judgement stipulated by cell parameters.

Instance Cell

Value Range and Step 0..6

Unit N/A

Default Value 3

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the lower is the quality


Configuration Rule and tolerability under the corresponding level, and it is easier to initiate
Adjustment Suggestion quality handover which should be adjusted in accordance with the actual
network situation.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

2-1974

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.70 Uplink interference level offset


Full Name Uplink interference level offset

Abbreviation soffSetUl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

The value is 0~20, and the level offset is -10~10dB. The uplink receiving
quality is poor during PS services, and the level is high. Consequently,
the MS camps on the interference area predefined. Uplink interference
handover can be performed if AvRxQualUL(s)<InterfFQSS(s). Where,
AvRxQualUL(s) is the average uplink bit error rate (MEAN_BEP),
InterfFQSS(s) is the bit error rate threshold FQSS calculated by the
average uplink level AvRxLevUL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+7 if XOffset+30<=AvRxLevUL(s)<XOffset+40
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
Where, XOffset and YOffset respectively represent the level offset
(SOffSetUl) and quality offset (QOffSetUl) of uplink interference
Description judgement stipulated by cell parameters.

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 15

2-1975

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the lower the requirement


Configuration Rule and
on quality handover is, and it is easier to initiate quality handover
Adjustment Suggestion
which should be adjusted in accordance with the actual network situation.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.71 Downlink interference quality offset


Full Name Downlink interference quality offset

Abbreviation qoffSetDl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

The value is 0~6, and the quality offset is -3~3. The downlink receiving
quality is poor during PS services, and the level is high. Consequently,
the MS camps on the interference area predefined. Downlink interference
handover can be performed if AvRxQualDL(s)<InterfFQSS(s. Where,
AvRxLevDL(s) is the average downlink bit error rate (MEAN_BEP),
InterfFQSS(s) is the bit error rate threshold FQSS calculated by the
average downlink level AvRxLevDL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevDL(s)<XOffset+30
Description =YOffset+7 if XOffset+30<=AvRxLevDL(s)<XOffset+40

2-1976

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

=YOffset+5 if XOffset+40<=AvRxLevDL(s)
Where, XOffset and YOffset respectively represent the level offset
(SOffSetDI) and quality offset (QOffSetDl) of downlink interference
judgement stipulated by cell parameters.

Instance Cell

Value Range and Step 0..6

Unit N/A

Default Value 3

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the lower is the quality


Configuration Rule and tolerability under the corresponding level, and it is easier to initiate
Adjustment Suggestion quality handover which should be adjusted in accordance with the actual
network situation.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.48.72 Downlink interference level offset


Full Name Downlink interference level offset

Abbreviation soffSetDl

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

2-1977

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The value is 0~20, and the quality offset is -10~10dB. The downlink
receiving quality is poor during PS services, and the level is
high. Consequently, the MS camps on the interference area
predefined. Downlink interference handover can be performed if
AvRxQualDL(s)<InterfFQSS(s. Where, AvRxLevDL(s) is the average
downlink bit error rate (MEAN_BEP), InterfFQSS(s) is the bit error rate
threshold FQSS calculated by the average downlink level AvRxLevDL(s).
The calculation formula is as follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevDL(s)<XOffset+30
=YOffset+7 if XOffset+30<=AvRxLevDL(s)<XOffset+40
=YOffset+5 if XOffset+40<=AvRxLevDL(s)
Where, XOffset and YOffset respectively represent the level offset
(SOffSetDI) and quality offset (QOffSetDl) of downlink interference
Description judgement stipulated by cell parameters.

Instance Cell

Value Range and Step 0..20

Unit N/A

Default Value 10

Default Value This parameter should be set on demand of radio


Configuration Reason environment.

The larger the value is, the lower the requirement


Configuration Rule and
on quality handover is, and it is easier to initiate quality handover
Adjustment Suggestion
which should be adjusted in accordance with the actual network situation.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1978

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.48.73 Invalid intra-handover time


Full Name Invalid intra-handover time

Abbreviation tMaxIHo

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

When the MS performs PS services, the timer TMaxIHo starts after


the MS performs interference handover in the cell for the first time.
If handover occurs again before the counter ecxpires, the previous
handover is considered to have no influence on interference, the counter
HoCount increases by 1 and the counter TMaxIHo restarts. If handover
occurs after the counter expires, the previous handover is considered
valid, clear the counter IHoCount to 0 and restart the counter TMaxIHo.If
the counter reaches MaxIHo, it indicates that no more attempt is needed,
Description and the inter-cell handover shoudl be performed.

Instance Cell

Value Range and Step 1..100

Unit N/A

Default Value 3

Default Value If the handover occurs continuously within


Configuration Reason 3 seconds, it is considered as too frequent.

If the default value is set as too small, the invalid handover is easily to
Configuration Rule and be judged as valid handover.
Adjustment Suggestion If the value is set as too large, the valid handover is easily to be judged
as invalid handover.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

2-1979

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.48.74 MAX count of invalid intra-handover


Full Name MAX count of invalid intra-handover

Abbreviation maxIHo

Managed Object PS Handover Control

3GPP Name N/A

3GPP Reference N/A

When the MS performs PS services, the timer TMaxIHo starts after


the MS performs interference handover in the cell for the first time.
If handover occurs again before the counter ecxpires, the previous
handover is considered to have no influence on interference, the counter
HoCount increases by 1 and the counter TMaxIHo restarts. If handover
occurs after the counter expires, the previous handover is considered
valid, clear the counter IHoCount to 0 and restart the counter TMaxIHo.If
the counter reaches MaxIHo, it indicates that no more attempt is needed,
Description and the inter-cell handover shoudl be performed.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 3

Default Value Usually, if the handover occurs three times


Configuration Reason continuously, it is considered as too frequent.

If the value is too small, the handover is easily to be judged as invalid


Configuration Rule and and the MS is performed on penalty, which is likely to cause call drop.
Adjustment Suggestion If the value is too large, the handover is difficult to be judged as invalid
interference handover and the number of invalid handover increases.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1980

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->GPRS Configuration->PS Handover Control

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49 Trx(GTrx)
2.49.1 TRX ID
Full Name TRX ID

Abbreviation GTrx

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

Description TRX ID

Instance None

Value Range and Step 1..60

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

2-1981

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.2 TRX Sequence


Full Name TRX Sequence

Abbreviation GTrxSeq

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

Description TRX ID

Instance Trx

Value Range and Step 1..60

Unit N/A

Default Value NA

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1982

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.49.3 GBtsPanel DN
Full Name GBtsPanel DN

Abbreviation refGBtsPanel

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the DN that refers to the carrier panel.

Instance Trx

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter is applicable for base stations with the versions earlier
Configuration Reason than V3.

Configuration Rule and This parameter is applicable for base stations with the versions earlier
Adjustment Suggestion than V3.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.4 GSubCell DN
Full Name GSubCell DN

Abbreviation refGSubCell

Managed Object Trx

2-1983

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description This parameter references to the subcell DN.

Instance Trx

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.5 TRX type


Full Name TRX type

Abbreviation trxType

Managed Object Trx

3GPP Name None

3GPP Reference N/A

2-1984

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Common TRX is suitable for common cells. Extended TRX is suitable


for extended cells.
In a common cell, TRX type shall be configured as normal TRX.
When a subcell is not supported under the extended cell, TRX type shall
be configured as the extended TRX. When the subcell is supported
under the extended cell, subcell 1 shall be configured as the extended
Description TRX, and there are no special requirements for subcell 2.

Instance TRX

0: Common TRX
Value Range and Step 1: Extended TRX

Unit N/A

Default Value 0

Default Value
Configuration Reason This parameter has a fixed configuration.

Configuration Rule and


Adjustment Suggestion This parameter has a fixed configuration.

Change Mode Offline

Related features ZGO-04-01-001 Extended Cell Coverage

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.6 Static power level


Full Name Static power level

Abbreviation pwrReduction

Managed Object Trx

3GPP Name N/A

2-1985

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference N/A

This parameter indicates the static power level of transceiver. Usually


a static power control is added on the basis of TRX transmission power
specified by static power level. Namely, a restriction is added based on
the maximum transmission power, thus to get the actual maximum trans-
mission power Pn of the TRX. The dynamic power control is implemented
based on the maximum transmission power Pn. When this value is set to
Description a minus value, SDR's power shares gains.

Instance TRX

0: Max output power


1: Max output power -2dB
2: Max output power -4dB
3: Max output power -6dB
4: Max output power -8dB
5: Max output power -10dB
6: Max output power -12dB
250: Max output power +3dB
251: Max output power +2.5dB
252: Max output power +2dB
253: Max output power +1.5dB
254: Max output power +1dB
Value Range and Step 255: Max output power +0.5dB

Unit N/A

Default Value 0

Default Value
Configuration Reason Due to the practical application of the net

If the static power of the weak coverage cell is configured relatively high,
it helps reduce calldrop rate and improve communication quality.
If the static power of the over-coverage cell is reduced by 2-4dB, which
helps reduce intra-network interference and improve communication
quality. For the over-coverage cell in the dense-populated urban area,
the static power can be reduced by 2-6dB, and the setting of all carriers
Configuration Rule and in the same cell must be same.
Adjustment Suggestion For rural areas and areas with complex topography, relatively high static
power level helps improve the success rate of SD/TCH assignment, the
success rate of call setup, coverage rate, and the paging success rate of
CN. For SDR sites, the static power level is adjusted on OMCB. Here, a
minus value represents the shared gain, with a maximum of 3 dB. The
more the carriers on RRU, the greater the gained value can be set. The
less the carriers on RRU, the smaller the gained value can be set.

Change Mode Offline

2-1986

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features ZGB-04-02-002 Static BTS Power Control

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail Update

2.49.7 Assign Priority of the Trx


Full Name Assign Priority of the Trx

Abbreviation trxPriority

Managed Object Trx

3GPP Name None

3GPP Reference N/A

This parameter indicates priorities for allocating carriers of the same type.
1 represents the highest priority. Select channels on carriers with high
Description priority when allocating CS channels.

Instance TRX

Value Range and Step 1..5

Unit N/A

Default Value 3

Default Value The common carriers takes lower priority than


Configuration Reason BCCH carrier.

The CS channel allocation refers to carrier


Configuration Rule and
priority. The common carriers takes lower priority than BCCH carrier.
Adjustment Suggestion
If some carriers need to accept the CS traffic, level up their priorities.

Change Mode Offline

Related features ZGO-03-02-002 Enhancement on Channel Allocation

Related Parameters N/A

2-1987

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.8 Power level


Full Name Power level

Abbreviation powerClass

Managed Object Trx

3GPP Name power class45.005

3GPP Reference 3GPP TS 45.005

This parameter indicates the power level of carrier. The value can be
converted to an actual power value used to calculate path loss and CI
Description value in measurement report.

Instance TRX

Value Range and Step 1..8

Unit N/A

Default Value 3

Default Value
Configuration Reason The level 3 carrier is frequently used.

Configuration Rule and Set this parameter according to the BTS configuration.
Adjustment Suggestion The combiner loss should also be considered.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um interfaceAbis interface

2-1988

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.9 Pair Trx


Full Name Pair Trx

Abbreviation refGTrx

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

This parameter indicates a pair of allocatable carriers during DLDC ser-


Description vices.

Instance Trx

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1989

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.10 RTTI preference


Full Name RTTI preference

Abbreviation rttiPrefer

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the carrier is preferentially selected


by RTTI MS. If this parameter is configured as RTT preferred carrier, this
carrier is allocated to perform services when the MS that supports RTT
establishes RTTI TBF. When the MS that does not support RTT performs
PS services, this carrier is selected for allocation only when no other car-
Description rier can be allocated.

Instance TRX

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason It's not basic function and decided on demand.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features N/A

Related Parameters RTTISupport

This parameter is valid after the BSC-level


Relationship
switch and cell-level switch with RTTIfunction are enabled.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-1990

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.11 TSC
Full Name TSC

Abbreviation tsc

Managed Object Trx

3GPP Name Training Sequence Code

3GPP Reference 3GPP TS 45.002

This parameter indicates the training serial code (TSC) of the timeslot.
There are eight types of TSC, with low mutual dependency. It is used
for reference of delay compensation for adaptive balance circuit at the
receiving side. For the timeslot which BCCH occupies, this parameter
Description must be equal to BCC of a cell.

Instance TS

Value Range and Step 0..7

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

Related features N/A

Related Parameters BCC

Relationship TSC value on BCCH channel shall be same as BCC value.

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

2-1991

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.12 TSC2
Full Name TSC2

Abbreviation tsc2

Managed Object Trx

3GPP Name Training Sequence Code

3GPP Reference 3GPP TS 45.002

This parameter is used for pairing of two non-VAMOS MSs. One MS uses
Description TSC and the other MS uses TSC2.

Instance TS

Value Range and Step 0..7

Unit N/A

Default Value NA

Default Value
Configuration Reason None

When the VAMOS function is disabled, this parameter


Configuration Rule and
is invalid. When the VAMOS function is enabled, the value configured
Adjustment Suggestion
must be different from that of TSC.

Change Mode Offline

Related features ZGO-04-05-003 VAMOS

Related Parameters SupportVAMOS,


TSC

This parameter is valid only when SupportVAMOS is enabled. The value


Relationship
is different from that of TSC.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-1992

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.49.13 ARFCN
Full Name ARFCN

Abbreviation arfcn

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the frequency point of this transceiver.

Instance TRX

Value Range and Step 0..1023

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

2-1993

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.49.14 GHoppingFrequency DN
Full Name GHoppingFrequency DN

Abbreviation refGHoppingFrequency

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

When configuring RF hopping, select the hopping mode configured in the


hopping system as the hopping system ID. During hopping, the tranceiver
Description uses the MA frequency point list configured in the hopping system.

Instance TRX

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

Related features ZGO-04-03-001 Synthesized Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1994

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.49.15 GHoppingBaseband DN
Full Name GHoppingBaseband DN

Abbreviation refGHoppingBaseband

Managed Object Trx

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the DN referring to the baseband hopping sys-


Description tem.

Instance Trx

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.16 BCCH Mark


Full Name BCCH Mark

Abbreviation BCCHMARK

2-1995

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Trx

3GPP Name None

3GPP Reference N/A

One BCCH carrier frequency must be configured in a cell and it should


Description be the only one.

Instance TRX

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value NA

Default Value The fixed attributes generated when the BCCH


Configuration Reason carrier has been configured.

Configuration Rule and


Adjustment Suggestion No need to modify.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.49.17 Combiner Loss


Full Name Combiner Loss

Abbreviation CombinerLoss

Managed Object Trx

3GPP Name N/A

2-1996

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

Description This parameter indicates the combiner loss of the carrier.

Instance TRX

Value Range and Step 0..48

Unit dB

Default Value 0

Default Value This parameter is configured according to the


Configuration Reason actual condition.

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to the actual combiner loss of the carrier.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version iBSCV6.20.710b

Parameter Modifying
Detail New

2.49.18 HoppingFrequency MAIO


Full Name HoppingFrequency MAIO

Abbreviation maio

Managed Object Trx

3GPP Name Mobile Allocation Index Offset

3GPP Reference 3GPP TS 44.018

2-1997

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

During communication, the carrier number adopted on air interface is an


element of the MA set. Mobile Allocation Index (MAI) (0 MAI n-1) is a
variable for determining a definite element in the MA set.
According to the FH algorithm in GSM 05.02 specification, MAI is
function of the following aspects:
TDMA Frame Number (FN) or Reduced TDMA Frame Number (RFN),
frequency Hopping Serial Number (HSN), and Mobile Allocation Index
Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels to contend for the same carrier at the same moment.
Generally, several basic FH units (timeslot or TDMA frame) constitute an
FH group. They have the same MA and HSN and the only difference
among them is MAIO. Thus the same MA and HSN are put in FHS/MA
table.
When the FH group corresponding to the timeslot has no frequency
Description hopping, MAIO of the timeslot is invalid.

Instance TRX

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail New

2-1998

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.49.19 Support TS freq-hopping


Full Name Support TS freq-hopping

Abbreviation TsFHSupport

Managed Object Trx

3GPP Name None

3GPP Reference N/A

Enables/Disables the TS frequency hopping function (The TS frequency


hopping function can be enabled even if the carrier frequency is config-
ured not to conduct frequency hopping). Each TS can be configured to
enable or disable the frequency hopping function. If the frequency hop-
ping function is disabled, the time slot use the frequency point configured
Description for the carrier frequency.

Instance TRX

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The TS frequency hopping function is seldom used.

Configuration Rule and Set this parameter as required by the operator. The function is generally
Adjustment Suggestion used for test.

Change Mode Offline

Related features ZGO-04-01-001 Extended Cell Coverage

Related Parameters siteType

The TS frequency hopping function can only be enabled on an SDR


Relationship
base station.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-1999

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.50 Ts(GTs)
2.50.1 Ts ID
Full Name Ts ID

Abbreviation GTs

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

Description Ts ID

Instance None

Value Range and Step 0..7

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.2 TS Sequence
Full Name TS Sequence

2-2000

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation GTsSeq

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the timeslot number.

Instance Ts

Value Range and Step 0..7

Unit N/A

Default Value NA

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.3 TS Channel Combination


Full Name TS Channel Combination

Abbreviation tsChannelComb

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

2-2001

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter defines combined types of timeslot channel. Correlation


with the following several parameters is as follows:
CBC supported (SmsCbUsed).
If "CBC support (SmsCbUsed)" is No, that is, CBC is not supported, the
system automatically searches all timeslot channel combinations in the
cell. If CBC channel exists, it is changed to SDCCH.
If "CBC support (SmsCbUsed)" is Yes, that is, CBC is supported, the
system automatically searches all timeslot channel combinations in
the cell. If a non-BCCH channel is found for a carrier, it is changed to
SDCCH+CBCH.
GPRS service support (PsSupport)
If "GPRS Supported (PsSupport)" is No, that is, GPRS is not supported,
the system automatically changes all timeslot channels whose type is
PS in the cell to TCH.
Common control channel configuration (CcchConf)
When CCCH Channel (CcchConf) is configured as "a basic physical
channel used by CCCH, along with SDCCH". In channel information
parameters,
timeslot 0 channel combination shall be one of these two combined
channels: BCCH+SDCCH/4 and BCCH+SDCCH/4+CBCH.
When CCCH Channel (CcchConf) is configured as "a basic physical
channel used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0 channel combination shall be one of these two
combined channels: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
When CCCH Channel (CcchConf) is configured as "two basic physical
channels used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0 and 2 channel combination shall be these two
combined channels: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
When CCCH Channel (CcchConf) is configured as "three basic physical
channels used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0, 2, and 4 channel combination shall be these two
combined channels: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
When CCCH Channel (CcchConf) is configured as "four basic physical
channels used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0, 2, and 4 channel combination shall be these two
Description combined channels: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.

Instance TS

2-2002

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0:Full rate traffic channel(Full rate traffic channel)


1:TCH/H\(0,1\)+FACCH/H\(0,1\)+SACCH/TH\(0,1\)(TCH/H\(0,1\)+FA-
CCH/H\(0,1\)+SACCH/TH\(0,1\))
3:SDCCH/8+SACCH/C8(SDCCH/8+SACCH/C8)
4:FCCH+SCH+BCCH+CCCH(FCCH+SCH+BCCH+CCCH)
5:BCCH+SDCCH/4(BCCH+SDCCH/4)
6:BCCH+CCCH(BCCH+CCCH)
7:BCCH+SDCCH/4+CBCH(BCCH+SDCCH/4+CBCH)
8:SDCCH + CBCH(SDCCH + CBCH)
Value Range and Step 14:PDTCH+PACCH+PTCCH(PDTCH+PACCH+PTCCH)

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGB-03-02-005 Static Channel Management


ZGB-03-02-006 Dynamic Channel Management
Related features ZGO-03-02-008 EGPRS on BCCH-TRX Configurable

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.4 MAIO
Full Name MAIO

Abbreviation maio

Managed Object Ts

2-2003

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name Mobile Allocation Index Offset

3GPP Reference 3GPP TS 44.018

During communication, the carrier number adopted on air interface is an


element of the MA set. Mobile Allocation Index (MAI) (0 MAI n-1) is a
variable for determining a definite element in the MA set.
According to the FH algorithm in GSM 05.02 specification, MAI is
function of the following aspects:
TDMA Frame Number (FN) or Reduced TDMA Frame Number (RFN),
frequency Hopping Serial Number (HSN), and Mobile Allocation Index
Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels to contend for the same carrier at the same moment.
Generally, several basic FH units (timeslot or TDMA frame) constitute an
FH group. They have the same MA and HSN and the only difference
among them is MAIO. Thus the same MA and HSN are put in FHS/MA
table.
When the FH group corresponding to the timeslot has no frequency
Description hopping, MAIO of the timeslot is invalid.

Instance TS

Value Range and Step 0..63

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and This parameter should be set according to the


Adjustment Suggestion radio network planning.

Change Mode Offline

ZGO-04-03-001 Synthesized Frequency Hopping


Related features ZGO-04-03-004 Baseband Frequency Hopping

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

2-2004

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.5 Dynamic TS
Full Name Dynamic TS

Abbreviation changeable

Managed Object Ts

3GPP Name None

3GPP Reference N/A

YES: this timeslot is a dynamic timeslot that either changes the PDCH
channel into implementing PS services as needed, or is used for CS
services.
NO: the fixedly configured timeslot. It corresponds to the dynamic
timeslot, only used fot the timeslot with fixed configuration.
This parameter is used for all timeslots configured in batches in a carrier,
Description as well as used fot a single timeslot during configuration.

Instance TS

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

The time slot attribute is dynamic by default.


Default Value
The attribute can be changed to static TCH channel or PDCH channel
Configuration Reason
based on the needs of CS or PS services, or on the needs of customer.

The attribute can be changed to static TCH


Configuration Rule and channel or PDCH channel based on the needs of CS or PS services, or
Adjustment Suggestion on the needs of customer. Dynamic half rate can be enabled with this
parameter being set "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

2-2005

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.6 Ps Service Preference Property


Full Name Ps Service Preference Property

Abbreviation preferPsService

Managed Object Ts

3GPP Name None

3GPP Reference N/A

This parameter indicates preferential properties of the GPRS, EDGE,


and EDGE2 services during PS services.
255: No preferred. All PS service types can be occupied.
0: GPRS preferred. When HybridOccuSupp is disabled, EDGE services
cannot occupy this channel. When HybridOccuSupp is enabled, the
EDGE can occupy this channel but the priority is low.
1: EDGE preferred. When HybridOccuSupp is disabled, GPRS cannot
occupy this channel. When it is enabled, the GPRS can occupy this
channel but the priority is low.
2: only for EDGE. GPRS services cannot occupy this channel.
3: EGPRRS2-A preferred. The priority for common GPRS and EDGE
services occupying this channel is low.
4: only for EGPRRS2-A . Common GPRS and EDGE cannot occupy
this channel.
This parameter is used for all timeslots configured in batches in a carrier,
Description as well as used fot a single timeslot during configuration.

Instance TS

0: GPRS preference
1: EDGE preference
2: EDGE dedicated
Value Range and Step 255: No preference

Unit N/A

Default Value 255

2-2006

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value GPRS amd EDGE services can share one dynamic
Configuration Reason timeslot.

If an EDGE service needs a high transmission


rate, it is recommended to configure a certain number of static
Configuration Rule and
EDGE-dedicated
Adjustment Suggestion
channel. Also EDGE-preferred and GPRS-preferred can be configured
to separate the two types of services.

Change Mode Offline

Related features ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version UR11.2 D

Parameter Modifying
Detail Update

2.50.7 Pair No.


Full Name Pair No.

Abbreviation pairNo

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the pair No. to which timeslots belong.

Instance Ts

2-2007

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

{GTsSeq==0}[1][255],
{GTsSeq==1}[1][255],
{GTsSeq==2}[2][255],
{GTsSeq==3}[2][255],
{GTsSeq==4}[3][255],
{GTsSeq==5}[3][255],
{GTsSeq==6}[4][255],
Value Range and Step {GTsSeq==7}[4][255]

Unit N/A

Default Value 255

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.8 USF Mode Used In RTTI


Full Name USF Mode Used In RTTI

Abbreviation usfMode

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

2-2008

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter indicates whether the USF mode used by RTT is RTTI
Description USF or BTTI USF.

Instance Ts

0: BTTI USF
1: RTTI USF
Value Range and Step 255: Not Valid

Unit N/A

Default Value 255

Default Value
Configuration Reason By default, the channel is used for assigning BTTI.

Set this parameter to 1 when the channel is used for RTTI USF
Configuration Rule and assignment under RTTI. Set this parameter to 0 when the channel is
Adjustment Suggestion used for BTTI USF assignment under RTTI. Use the default value 255
when the channel is used for normal BTTI channel assignment.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.50.9 PDCH Precedence


Full Name PDCH Precedence

Abbreviation pdchPrecedence

Managed Object Ts

3GPP Name None

3GPP Reference N/A

2-2009

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

For dynamic timeslots, if the precedence is configured as TRUE, and


these timeslots are occupied by PS services, then this channel is not
preempted by CS services. In this case, the CS services preempting the
throughput in the cell with frequent PDTCH, and the access index related
to congestion will be improved. If PS can preempt CS services, and PS
services fail to apply for channels due to inadequate radio resources, the
PS can preempt the CS services on this channel.
This parameter is used for all timeslots configured in batches in a carrier,
Description as well as used fot a single timeslot during configuration.

Instance TS

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Usually this type of dynamic channel does not


Configuration Reason need to be configured.

If this attribute of a dynamic timeslot is set as TRUE and is occupied by


PS services, the corresponding channel cannot used by CS services.
Configuration Rule and This configuration can improve the access performance index.
Adjustment Suggestion To ensure a certain amount of PS services running on the channel when
there are not enough channel resources, the PSPrmpCSSupport switch
can be turned on to make PS services grab resources from CS services.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2010

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.50.10 GHoppingFrequency DN
Full Name GHoppingFrequency DN

Abbreviation refGHoppingFrequency

Managed Object Ts

3GPP Name N/A

3GPP Reference N/A

Sets the frequency hopping system for a time slot when the TsFHSupport
Description parameter is configured to enable the TS frequency hopping function.

Instance TRX

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason No default value. The frequency hopping system is configured by users.

Configuration Rule and Set this parameters in accordance with the frequency hopping systems
Adjustment Suggestion planned by the operator.

Change Mode Offline

Related features ZGO-04-03-001 Synthesized Frequency Hopping

Related Parameters MAIOTSFHSIDtsChannelCombChangeable

When the RFID frequency hopping (or TS frequency hopping) function is


enabled, TSs of TCH carrier frequencies in the same cell cannot have
Relationship the same frequency hopping system, and the same MAIO. For example,
the TS0 of TRX1 and TS0 of TRX2 cannot both use the frequency
hopping system 1 and MAIO0.

Related Interfaces Um

Impact on Equipment 1

Impact on service 2

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Trx->Ts

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2011

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51 Adjacent GSM Cell Configuration(GGsmRelation)


2.51.1 Relation type
Full Name Relation type

Abbreviation RelationType

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the relation type of the adjacent cell and the
source cell. It is one of the handover cell, reselection cell, and han-
Description dover/reselection cell.

Instance GsmRelation

0: Handover and reselect


1: Reselect
Value Range and Step 2: Handover

Unit N/A

Default Value 0

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2012

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.51.2 Adjacent GSM Cell Configuration ID


Full Name Adjacent GSM Cell Configuration ID

Abbreviation GGsmRelation

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Adjacent GSM Cell Configuration ID

Instance None

Value Range and Step 1..192

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.3 DN of source Gsmcell


Full Name DN of source Gsmcell

Abbreviation refGGsmCell

2-2013

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Users can click Select to select cell or external cell in displayed interface,
check Mutual Configuration, you can mutually configure it as reselection
Description and handover cell.

Instance GsmRelation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.4 DN of source ExternalGsmcell


Full Name DN of source ExternalGsmcell

Abbreviation refGExternalGsmCell

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

2-2014

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Reference N/A

Users can click Select to select cell or external cell in displayed interface,
check Mutual Configuration, you can mutually configure it as reselection
Description and handover cell.

Instance GsmRelation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.5 Relation Sequence


Full Name Relation Sequence

Abbreviation GGsmRelationSeq

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2015

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the adjacent cell sequence used inside IBSC, to
Description manage adjacent cells.

Instance GsmRelation

{RelationType==1}[1..64],
{RelationType==2}[65..128],
Value Range and Step {RelationType==0}[129..192]

Unit N/A

Default Value NA

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.6 Priority of handover


Full Name Priority of handover

Abbreviation HoPriority

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2016

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, cell priority should be considered in


sequencing candidate cells.
Therefore, there are three decisive factors to sequence candidate cells:
priority, traffic, and radio communication environment. Priority and traffic
have the most impact on cell sequencing. If they lead to the same result,
sequence cells by radio conditions. The priority of a cell is higher if this
Description value is set higher.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason normal setting

Configuration Rule and In most cases, this parameter is set to 3,


Adjustment Suggestion and the cell priority are the same.

Change Mode Offline

Related features ZGO-02-02-002 Dynamic Handover Priority Algorithm

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.7 MIN power level for handover access


Full Name MIN power level for handover access

Abbreviation RxLevMin

Managed Object Adjacent GSM Cell Configuration

3GPP Name RXLEV_ACCESS_MIN

2-2017

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 45.008

This parameter indicates the minimum receiving intensity level (on


BCCH) required for MS to handover to this cell. It is one of parameters
to decide preferred cells during handover control. MS in the serving
cell constantly monitors the signal intensity on BCCH of adjacent cells.
Adjacent cells with the minimum receiving intensity level higher than this
parameter are potential candidates for handover.
MS with receiving level larger than minimum receiving level indicates
that MS is at the edge of the serving cell.
Recommended value is usually approximated according to MS receiving
sensitivity. When network observes uneven traffic distribution in certain
cells, MIN access level increases the resulting C1 and C2 to decrease
the cell effective coverage range. However, the value of this parameter
cannot be too large. Otherwise, large value change can bring void area
across cell boundaries to result in sudden call drop problem. The value
of this parameter must not exceed -90 dBm for cell traffic balancing
conditions. Define the parameter value to 10 (that is, from -101 dBm ~
-100 dBm) at initial network rollout stage or lower, which is higher than
the receiving sensitivity of MS (that is, -102 dBm). However, the 2 dB
increase in parameter value is allowable in situations where network
Description coverage is not a problem.

Instance Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
Value Range and Step
21:-90~-89

2-2018

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

2-2019

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 15

Default Value
Configuration Reason Due to the practical application of the net

The value of this parameter must be higher than the minimum access
Configuration Rule and level of the corresponding adjacent cell, and the value should also be
Adjustment Suggestion higher or equal to the dowmlink level handover threshold, otherwise
frequent handover or reselection will happen.

Change Mode Offline

ZGB-02-02-001 Basic Handover


Related features ZGB-02-02-002 Basic Handover Decision Criteria

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.8 MIN threshold of signal level for handover on PBGT


Full Name MIN threshold of signal level for handover on PBGT

Abbreviation HoMarginPbgt

Managed Object Adjacent GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

2-2020

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
PBGT value of an adjacent cell is also one of the causes for handover.
The decision process is as follows: If the PBGT value of an adjacent
cell is greater than the relevant threshold of this cell, handover shall be
performed to find a more suitable cell.
This parameter indicates the threshold used to determine PBGT
Description handover from an adjacent cell to local cell.

Instance Cell

Value Range and Step 0..100

Unit dB

Default Value 30

Default Value
Configuration Reason Target cell to be slightly higher

If the vaue is large, it is hard to hand over to the target cell.


If the value is smaller than 24 ( a minus value), handover can be triggered
even the signal level of the target cell is lower than that of the source cell.
In areas with frequent handover, the value should be improved
appropriately to reduce frequent handover.
In areas with blockings and shades, the value should be reduced
appropriately, to make handover occur as soon as possible, and to avoid
calldrop or poor quality because of fast fading.
The value can be set asymmetrically when the dual-band network shares
traffic or the traffic needs to be shared during single-band networking.
Configuration Rule and
Such as, the value from high traffic cell A to the low traffic cell B is
Adjustment Suggestion
configured small, and the value from the low traffic cell A to the high
traffic cell A is configured large, to balance the traffic between the cell A
and the cell B, and to reduce the cell A from congestion.
The value of CRO in the cell B corresponding to the cell A minus 24
should be greater than C2 of the cell B minus C2 of the cell A. Otherwise,
handover from the cell B to the cell A is triggered immediately after a call
is initiated at the cell B, which causes unshared traffic.
Unreasonable setting of the value has such impact on the handover,
calldrop, and road test coverage as ping-pong handover, and frequent
handover.

Change Mode Offline

ZGB-02-02-001
Related features ZGB-02-02-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-2021

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.9 MIN threshold of signal level for handover on power level


Full Name MIN threshold of signal level for handover on power level

Abbreviation HoMarginRxLev

Managed Object Adjacent GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

According to GSM specifications, handover decisions will be made after a


series of average values have been obtained. In handover caused by the
level, adjacent cells shall be screened and sequenced. The value should
be higher or equal to the threshold. This parameter defines the signal
Description strength threshold to determine handover from adjacent cell to local cell.

Instance Cell

Value Range and Step 0..100

Unit dB

Default Value 27

Default Value
Configuration Reason Target cell to be slightly higher

A handover based on signal strength is a kind of rescue handover. The


Configuration Rule and
threshold should be set lower (lower than PBGT threshold) to ensure a
Adjustment Suggestion
handover can be conducted in time.

Change Mode Offline

ZGB-02-02-001
Related features ZGB-02-02-002

Related Parameters N/A

Relationship N/A

2-2022

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.10 MIN threshold of signal level for handover on quality


Full Name MIN threshold of signal level for handover on quality

Abbreviation HoMarginRxQual

Managed Object Adjacent GSM Cell Configuration

3GPP Name None

3GPP Reference N/A

According to GSM specifications,handover decisions will be made after a


series of average values have been obtained. In handover based on qual-
ity, adjacent cells shall be screened and sequenced. The value should be
higher or equal to the threshold. This parameter defines the signal quality
Description threshold to determine handover from an adjacent cell to the local cell.

Instance Cell

Value Range and Step 0..100

Unit dB

Default Value 26

Default Value
Configuration Reason Target cell to be slightly higher

A handover based on signal quality is a kind of rescue handover. The


Configuration Rule and
threshold should be set lower (lower than the strength threshold) to
Adjustment Suggestion
ensure a handover can be conducted in time.

Change Mode Offline

ZGB-02-02-001
Related features ZGB-02-02-002

Related Parameters N/A

2-2023

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.11 Is related cell


Full Name Is related cell

Abbreviation IsRelatedCell

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Only the cell related to the serving cell can be a candidate in rapid fading
handover. This is a parameter of adjacent cell and is used to indicate
Description whether adjacent cell is related to the serving cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value It is a functional parameter and is configured


Configuration Reason to "No" by default.

Configuration Rule and This switch is enabled if it is planned as


Adjustment Suggestion a candidate in rapid fading handover as needed.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

2-2024

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.12 Neighboring cell layer


Full Name Neighboring cell layer

Abbreviation NCellLayer

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter provides the handover policies in multilayer network


technology and dual-frequency network technology. Multilayer radio
coverage can be formed in the same physical area.
The PBGT handover defined in the specifications at one layer can reduce
the number of handovers during the call, thus improving the system
reliability and communication quality. The policy of handover between a
macro cell layer and a micro cell layer mainly depends on the moving
speed of MS. An MS at higher moving speed will try to stay at the macro
cell layer (upper layer of the micro cell layer), and an MS at lower moving
speed will try to enter the micro cell layer (lower layer of the macro cell
layer). Only in the case of PBGT handover and emergency, will the
undefined cell of the service area be considered as a candidate cell.
Same layer of the home cell: Adjacent cell and local cell are in the same
layer (PBGT handover possible); Upper layer of the home cell: Adjacent
cell is the upper layer of local cell (local cell is a micro cell); Lower layer
of the home cell: Adjacent cell is the lower layer of local cell (local cell
Description is a macro cell).

Instance Cell

2-2025

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
Value Range and Step 3: Lower layer of the home cell

Unit N/A

Default Value 1

Default Value
Configuration Reason Generally, the network is a single layer network.

This layer, which belongs to the logic layer, has nothing to do with
the actual coverage and network frequency band. For example,
900M->900M can be set to the same layer, upper layer, or lower layer,
and 1800M->900M can also be set to the same layer, upper layer, or
lower layer.
Layer relationship brings an impact on the priority of target cell
Configuration Rule and selection and sequence (referring to Handover Algorithm Application
Adjustment Suggestion Guide). Usually, handover with layer relationship includes PBGT
handover, macro-micro handover, and traffic handover. Among which,
the macro-micro handover can be triggered only when adjacent cell
relationship (handover from upper layer to lower layer) is set.
As each Layer is able to share some traffic, it is suggested to flexibly
set layers for different adjacent cells to share traffic, so as to improve
congestion rate.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2026

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.51.13 Is handover forced neighbor cell


Full Name Is handover forced neighbor cell

Abbreviation IsHoForceNcell

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of 1800M and 900M network sharing site, it is better to


handover subscribers of 900M network to 1800M network. At this time,
you can do directional handover traffic.
Forced handover is a method for on-site traffic adjustment. The forced
handover direction is definite, i.e. 1800M sector in the same direction.
To avoid influence on other cells, the forced handover is performed only
Description for a specific object cell.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason normal setting

Configuration Rule and This parameter should be set for the target
Adjustment Suggestion cell in a handover including force traffic transfer.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2027

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.14 MAX level difference of force handover


Full Name MAX level difference of force handover

Abbreviation MaxForceHoDiff

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Force traffic transfer handover is performed only for one designated cell
and it is restricted by a tolerable level difference MaxLevDiff. This level
difference is lower than PBGT handover threshold in reverse direction,
Description thus to avoid oscillating handover.

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 9

Default Value
Configuration Reason experience value

The lower the level difference. the more likely


Configuration Rule and the handover will happen. The parameter cannot be set too low,
Adjustment Suggestion otherwise
frequent ping-pong handovers will be caused.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2028

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.51.15 Handover force resource threshold


Full Name Handover force resource threshold

Abbreviation HoForceResThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Directed handover should not cause congestion in the destination cell.


When resource of object cell is lower than the congestion threshold,
forced handover can be implemented.
The resource threshold is calculated as follows:
100-current TCH load in a cell>= threshold for transferring reserved
resources current TCH load in a cell = number of busy TCHs (static
and idle)*100/(number of busy TCHs (static and idle) +number of
Description idleTCHs(static and idle).

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 40

Default Value
Configuration Reason normal radio environment experience value

Configuration Rule and The threshold cannot be set too high to avoid
Adjustment Suggestion force transfer of overloaded traffic in a cell.

Change Mode Offline

Related features ZGO-02-02-003 Directed-Shift Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2029

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.16 Macro to micro handover Threshold


Full Name Macro to micro handover Threshold

Abbreviation MacroMicroHoThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the signal strength threshold for macro-micro


Description handover.

Instance Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
Value Range and Step
32:-79~-78

2-2030

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

Default Value 20

Default Value
Configuration Reason experience value

Configuration Rule and In most cases, it will be easier to trigger


Adjustment Suggestion a macro-micro handover if the threshold is set higher.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-2031

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.17 Macro to micro handover Value N


Full Name Macro to micro handover Value N

Abbreviation MacroMicroHoN

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

During a process of macro to micro handover judgement, if N consecutive


times of measurement reports meet the conditions to conduct a macro to
Description micro handover, the handover will be conducted.

Instance Cell

Value Range and Step 1..255

Unit N/A

Default Value 4

Default Value
Configuration Reason experience value

If the level an adjacent cell is higher than the macro to micro handover
for consecutive Ntimes, a handover will be triggered.
If the parameter is set too high, handover will not be conducted in time
Configuration Rule and
and overloaded traffic cannot be transferred;
Adjustment Suggestion
If the parameter is set low, wrong or frequent handover will happen, thus
number of call drops will increase.
This parameter configures adjacent cells.

Change Mode Offline

Related features N/A

2-2032

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.18 Target cell traffic threshold


Full Name Target cell traffic threshold

Abbreviation TargetCellTrafficThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for the target cell's traffic. The
system decides whether to perform handover to the cell according to
this parameter's value. If the traffic of the target cell is higher than the
threshold, handover is not made to the cell.
Description This parameter is used for 2G handover and reselecting adjacent cells.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 75

Default Value The resources should be obtained and at the


Configuration Reason same time the congestion in target cell should be avoided.

Configuration Rule and If the parameter is set too high, congestion


Adjustment Suggestion will be likely to happen in the target cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

2-2033

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.19 CS adjacent cell report priority


Full Name CS adjacent cell report priority

Abbreviation RepPrioCS

Managed Object Adjacent GSM Cell Configuration

3GPP Name REP_PRIORITY

3GPP Reference 3GPP TS 45.008

Priorities of the adjacent cell are as follows:


Adjacent cell with same frequency band. have the following features:
BSIC of color code is valid; Its measured field intensity ranks high among
cells in the same frequency band and is larger than or equal to the lower
limit specified by RprtThoCSXXX. Here, XXX represents frequency band
of serving cell.
Adjacent cell in the frequency band different from that of the serving
cell must have the following features: BSIC of color code is valid.
Its measured field intensity ranks high among cells in the same
frequency band and is larger than or equal to the lower limit specified
by RprtThoCSXXX. Here, XXX represents the frequency band different
from that of serving cell.
Other access technologies, such as UTRAN/FDD adjacent cells. These
cell shall have the following features: the cells scramble is correct. Its
measured field intensity ranks high among cells with the same access
technologies and is larger than or equal to the lower limit specified
by XXXRprtThoCS. Here, XXX represents access technologies like
Description
UTRAN/FDD.

2-2034

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

For above priorities, if the prioritys location has surplus, then leave
it to adjacent cell of the next priority. For access technology such
as UTRAN/FDD, or frequency band such as GSM 900, the cell with
high RepPrioCS is preferred. For cells with same RepPrioCS, the
cell with greater sum of RprtThoCSXXX (or XXXRprtThoCS) and
RprtOffsetCSXXX (or XXXRprtOffsetCS) is preferred.

Instance Cell

0: low
Value Range and Step 1: high

Unit N/A

Default Value 0

Default Value
Configuration Reason normal setting

Configuration Rule and No modification after configuration if there


Adjustment Suggestion is no special demands.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.20 PS adjacent cell report priority


Full Name PS adjacent cell report priority

Abbreviation RepPrioPS

Managed Object Adjacent GSM Cell Configuration

3GPP Name REP_PRIORITY

2-2035

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Reference 3GPP TS 45.008

This parameter indicates the priority of measurements reports. It is


broadcast to the MS in SI2quater.
Priorities of the adjacent cell are as follows:
Adjacent cell with same frequency band. have the following features:
BSIC of color code is valid; Its measured field intensity ranks high among
cells in the same frequency band and is larger than or equal to the lower
limit specified by RprtThoCSXXX. Here, XXX represents frequency band
of serving cell.
Adjacent cell in the frequency band different from that of the serving
cell must have the following features: BSIC of color code is valid.
Its measured field intensity ranks high among cells in the same
frequency band and is larger than or equal to the lower limit specified
by RprtThoCSXXX. Here, XXX represents the frequency band different
from that of serving cell.
Other access technologies, such as UTRAN/FDD adjacent cells. These
cell shall have the following features: the cells scramble is correct. Its
measured field intensity ranks high among cells with the same access
technologies and is larger than or equal to the lower limit specified
by XXXRprtThoCS. Here, XXX represents access technologies like
UTRAN/FDD.
For above priorities, if the prioritys location has surplus, then leave
it to adjacent cell of the next priority. For access technology such
as UTRAN/FDD, or frequency band such as GSM 900, the cell with
high RepPrioCS is preferred. For cells with same RepPrioCS, the
cell with greater sum of RprtThoCSXXX (or XXXRprtThoCS) and
Description RprtOffsetCSXXX (or XXXRprtOffsetCS) is preferred.

Instance Cell

0: low
Value Range and Step 1: high

Unit N/A

Default Value 0

Default Value
Configuration Reason refer to CS parameter SearchPrioPS3G

For the last priority setting of the measurement


report from adjacent cells, if the cells with higher priorities are
expected to report, RepPrioPS for an adjacent cell should be set high.
Configuration Rule and
Then the measurement results will be reported every time. In most
Adjustment Suggestion
cases every adjacent cell is treated the same. Cells with low priorities
does not report frequently (when ReportRatePS is set to 1), RepPrioPS
is recommended to be set with the default value.

Change Mode Offline

2-2036

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.21 The direction of neighbour cell for downlink rapid handover


Full Name The direction of neighbour cell for downlink rapid handover

Abbreviation NCellDir

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the direction of an adjacent cell to the current


Description cell. Every adjacent cell can be configured with direction information.

Instance Neighbor Cell

0: no direction
1: Direction A
Value Range and Step 2: Direction B

Unit N/A

Default Value 0

Default Value
Configuration Reason not High Railway scene set no direction

Configuration Rule and In high-speed railway environment, the direction


Adjustment Suggestion of an adjacent cell should be selected according to the network design.

Change Mode Offline

Related features N/A

2-2037

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.22 Minimum RX level(PS)


Full Name Minimum RX level(PS)

Abbreviation RxLevMin_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the minimum receiving strength level (on


PBCCH) required by MS to handover to this cell. It is one of the param-
eters to decide preferred cells during handover control. MS in a serving
cell constantly monitors the signal strength on PBCCH of adjacent cells.
Adjacent cells with the receiving intensity level higher than the minimum
value defined by this parameter are candidates for handover. When the
MS' minimum receiving strength required by the adjacent cell is greater
than that required by the local cell, it may cause handover and indicates
Description that the MS is on the border of the cell.

Instance Neighbor Cell

2-2038

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
Value Range and Step
43:-68~-67

2-2039

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

Unit dBm

Default Value 15

Default Value
Configuration Reason None

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

2-2040

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.51.23 Margin of PBGT handover(PS)


Full Name Margin of PBGT handover(PS)

Abbreviation HoMarginPbgt_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

PS handover decision can be made at receiving a series of average val-


ues. The PBGT_PS value of an adjacent cell is also one of the causes
for PS handover. The decision process is as follows: If the PBGT_PS
value of an adjacent cell is higher than the relevant threshold of this cell,
PS handover should be performed to find a more suitable cell. This pa-
rameterr is the threshold that must be used in the PS handover decision
Description to hand over from an adjacent cell to the local cell through PBGT.

Instance Neighbor Cell

Value Range and Step 0..48

Unit dB

Default Value 30

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2041

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.24 Margin of RX handover(PS)


Full Name Margin of RX handover(PS)

Abbreviation HoMarginRxLev_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

PS handover decision can be made at receiving a series of average val-


ues. In a handover caused by level changes, adjacent cells shall be
screened and sequenced. This parameter is the threshold that must be
used in the handover decision for a PS handover from the adjacent cell
Description to the local cell through signal strength.

Instance Neighbor Cell

Value Range and Step 0..48

Unit dB

Default Value 30

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2042

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.25 Margin of quality handover(PS)


Full Name Margin of quality handover(PS)

Abbreviation HoMarginRxQual_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

PS handover decision can be made at receiving a series of average val-


ues. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description cell through signal quality.

Instance Neighbor Cell

Value Range and Step 0..48

Unit dB

Default Value 30

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2043

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.26 Is related cell(PS)


Full Name Is related cell(PS)

Abbreviation IsRelatedCell_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Only the cell related to the serving cell can be a candidate in rapid fading
PS handover. This is a parameter of an adjacent cell and is used to indi-
Description cate whether an adjacent cell is related to the serving cell.

Instance Neighbor Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2044

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.27 Handover priority(PS)


Full Name Handover priority(PS)

Abbreviation HoPriority_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Cell priorities should be taken into consideration when candidate cells are
sequenced during PS handover. Therefore, there are three decisive fac-
tors to sequence candidate cells: priority, traffic, and radio communication
environment. Priority and traffic have the most impact on cell sequencing.
If they lead to the same result, sequence cells by radio conditions. The
Description priority of a cell becomes higher with the increasing of this value.

Instance Neighbor Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-2045

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.28 Max TX power of MS(PS)


Full Name Max TX power of MS(PS)

Abbreviation MsTxPwrMax_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum power allowed by an MS in an


Description adjacent cell when on PBCCH.

Instance Neighbor Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason None

Configuration Rule and This parameter is related to PBCCH. It is recommended


Adjustment Suggestion not to adjust the value.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2046

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.29 Traffic threshold of target cell(PS)


Full Name Traffic threshold of target cell(PS)

Abbreviation TargetTrafficThs_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold of the traffic in a target cell. The PS
handover arbitration is made on based on this value. If the traffic of this
target cell is higher than the threshold value, there will be no PS handover
Description to this cell.

Instance Neighbor Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2047

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.30 Threshold of macro to micro handover(PS)


Full Name Threshold of macro to micro handover(PS)

Abbreviation MacroMicroHoThs_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The handover from macro-cell to micro-cell is mainly applied to a two-


layer network. That is, the slowly moving MS hands over from the macro-
cell layer to the micro-cell layer. It judges whether the condition allows
the MS moving slowly performs PS handover to a cell one-layer lower
than the current cell. The condition is the level of adjacent cell exceeds
the threshold for N times. This parameter is the threshold for cell signal
strength when PS handover occurs between the macro cell and the mico
Description cell.

Instance Neighbor Cell

0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
Value Range and Step
19:-92~-91

2-2048

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48

2-2049

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit dBm

Default Value 20

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.31 Counter of macro to micro handover(PS)


Full Name Counter of macro to micro handover(PS)

Abbreviation MacroMicroHoN_PS

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The handover from macro-cell to micro-cell is mainly applied to a two-layer


network. That is, the slowly moving MS hands over from the macro-cell
layer to the micro-cell layer. It judges whether the condition allows the
MS moving slowly performs PS handover to a cell one-layer lower than
the current cell. The condition is the level of adjacent cell exceeds the
threshold for N times. This parameter is to count the adjacent cell level
higher than the threshold when PS handover occurs between the macro
Description cell and the mico cell.

2-2050

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Neighbor Cell

Value Range and Step 1..255

Unit N/A

Default Value 2

Default Value It is recommended to set the default value


Configuration Reason to 2, so as to ensure the accuracy and rapidness of handover.

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.32 The number of C/I limited cell


Full Name The number of C/I limited cell

Abbreviation CILimitedNum

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the number of adjacent cells to which handover


from the serving cell is limited. If the number is 0, handover from the
Description serving cell to this adjacent cell is not limited by other adjacent cells.

Instance Cell

Value Range and Step 0..5

2-2051

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Unit N/A

Default Value 0

Default Value The handover algorithm is used under the special


Configuration Reason scenario, so the default value 0 is disabled.

Generally, it is recommended not to set C/I


limited cell for the adjacent cell.At such areas as the intersection
Configuration Rule and
and crossing, the coverage cells are configured with C/I limited cell,
Adjustment Suggestion
to prevent handover from being performed to these cells because the
signal is unstable.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.33 The objectID list of C/I limited cell


Full Name The objectID list of C/I limited cell

Abbreviation LimitedObjectId

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the objectID list of C/I limited cell.

Instance Cell

Value Range and Step 0..255

Unit N/A

2-2052

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value [0,0,0,0,0]

Default Value The default value can be configured as required.


Configuration Reason 0 is the initial value, so it is taken as the default value.

According to actual condition on site, you


Configuration Rule and
can configure the adjacent cell object ID of C/I limited cell in the
Adjustment Suggestion
serving cell for one adjacent cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.34 The threshold list of C/I limited cell


Full Name The threshold list of C/I limited cell

Abbreviation CILimitedThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold list of C/I limited cell. When the C/I
value of the limited adjacent cell and serving cell of this adjacent cell is
greater than the limited threshold of the limited adjacent cell, this adjacent
Description cell will be limited. That is, handover towards this adjacent cell is limited.

Instance Cell

Value Range and Step 0..63

Unit N/A

2-2053

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value [63,63,63,63,63]

The handover algorithm is the algorithm used


Default Value in special condition, so the default value is set to a maximum value.
Configuration Reason That is, the restriction does not take effect. It can be adjusted
to a smaller value according to the on-site conditions.

The higher the threshold is, the more difficult


it is for limited cell to restrict the adjacent cell, and the easier
Configuration Rule and handover is towards the adjacent cell.Generally, the purpose of setting
Adjustment Suggestion limited cell for an adjacent cell is to avoid handover towards the
adjacent cell. Therefore, it is suggested to set the threshold to
a relatively low value.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.35 Downlink rapid handover threshold


Full Name Downlink rapid handover threshold

Abbreviation DLRapidHoThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2054

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

The downlink rapid handover is one of the causes for handover. The
decision process is as follows: do the handover if the latest downlink
level values (without average processing) is higher than the sum of
relevant threshold values and offset values. The handover reason is
Description downlink rapid handover. DLRapidHoThs defines the threshold value.

Instance GsmRelation

Value Range and Step 0..63

Unit N/A

Default Value 30

Default Value -80dbm can be considered as a sign for determining whether the level
Configuration Reason is good or not.

A larger value indicates greater difficulty for performing handovers. A


smaller value indicates less difficulty for performing handovers. A too
Configuration Rule and
large value may increase the possibility of call drops. A too small value
Adjustment Suggestion
may cause handover failures and call drops. Adjust this parameter
based on the network coverage.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.36 Downlink rapid handover N


Full Name Downlink rapid handover N

Abbreviation DLRapidHoN

Managed Object Adjacent GSM Cell Configuration

2-2055

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

The downlink rapid handover is one of the causes for handover. The
decision process is as follows: do the handover if the latest downlink
level values (without average processing) is higher than the sum of
relevant threshold values and offset values. The handover reason is
Description downlink rapid handover. DLRapidHoN defines the value N.

Instance GsmRelation

Value Range and Step 1..20

Unit N/A

Default Value 3

Default Value The purpose is to ensure that the handover can be quickly and correctly
Configuration Reason triggered.

A larger value leads to improved handover decision accuracy and worse


Configuration Rule and
real-time performance. A smaller value leads to reduced handover
Adjustment Suggestion
decision accuracy and better real-time performance.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.37 exclusive cell fro high speed


Full Name exclusive cell fro high speed

Abbreviation IsDLRapidHoNcell

2-2056

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter is one parameter for the adjacent cell, indicating whether
the adjacent cell is the high railway dedicated-network cell that can be the
Description target cell for downlink rapid handover.

Instance GsmRelation

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason A parameter related to features, so the default is no.

Configuration Rule and Set this parameter based on the network planning. For example, enable
Adjustment Suggestion this parameter the cell is planned in a high-speed scenario.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.38 CCN support


Full Name CCN support

Abbreviation CCNSUPPORT

Managed Object Adjacent GSM Cell Configuration

2-2057

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name CCN_ACTIVE

3GPP Reference 3GPP TS 44.060

Through the CCN_ACTIVE parameter carried in GPRS Cell Options IE


of SI13 on BCCH, the network side indicates the local cell whether to
enable CCN mode during the reselection to other GSM adjacent cell.
When the CCN_ACTIVE parameter is not carried in GPRS Cell Options
IE, or the CCN_ACTIVE parameter is disabled, the MS does not enter
the CCN mode. When the CCN_ACTIVE parameter is enabled, and the
cell is determined to reselect to other GSM cell, users should also check
whether the CCN_SUPPORTED parameter exists in the adjacent cell.
If it does not exist, the MS is supposed to use the CCN mode towards all
adjacent cells.
If it exists, set it as disabled, and the MS does not enter the CCN mode.
If it exists, set it as enabled, the MS enters the CCN mode.
Through the Packet Measurement Order message, the network
siide can also indicates the special MS that whether to enable the
CCN_ACTIVE parameter in the serving cell. In addition, through the
Packet Cell Change Order or PS Handover Command messgae, the
network side can also indicate the special MS that whether to enable
the CCN_ACTIVE parameter in the target cell. The setting of the
CCN_ACTIVE parameter carried in the message on PACCH take
spriority over that of the system message broadcast. The MS uses the
Description CCN mode when it is nearly under NC0 and NC1 modes.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Normally proposed value is yes.If the serving cell's CCN active is


enabled, and the neighbour cell's CCN support is enabled, the CCN
Configuration Rule and
mode is used when reselect to the neighbour cell;If the neighbour cell's
Adjustment Suggestion
CCN support is not enabled, the CCN mode is not used when reselect to
the neighbour cell.

Change Mode Offline

Related features ZGO-02-02-010 Network-assisted Cell Change

Related Parameters NACCSupport


CCNActive
SIStatusInd

2-2058

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

NACC should be enabled simultaneously with CCNActive/SISta-


Relationship
tusInd/CCNSupport.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.39 Is the directed retry ncell


Full Name Is the directed retry ncell

Abbreviation DirectRetryCell

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The parameter is used to indicate whether the neighbor cell is the directed
Description retry cell. It is one of the neighbor cell parameters.

Instance Neighbor Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value This parameter is related to special functions, so the default value is
Configuration Reason set as "Yes".

Configuration Rule and If the network planning requires the cell to


Adjustment Suggestion be a directed retry cell, set the parameter to "Yes".

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-2059

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.51.40 PBGT handover margin of subcell2


Full Name PBGT handover margin of subcell2

Abbreviation HoMarginPbgtSC2

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions depend upon


received average value of uplink and downlink signal strength. The
PBGT value of an adjacent cell is also one of the causes for handover.
The decision process is as follows: If the PBGT value of an adjacent
cell is greater than the relevant threshold of this cell, handover shall be
performed to find a more suitable cell.
This parameter indicates the threshold used to determine PBGT
Description handover from the second subcell of an adjacent cell to local cell.

Instance Neighbor Cell

Value Range and Step 0..100

Unit N/A

Default Value 40

According to the on-site experiences, when minimum PGBT handover


threshold is set to 30, the service can be handed over to a neighbor cell
Default Value
with better level and handover times are reasonable.
Configuration Reason
The second sub-cell is generally 10 dB weaker than the first sub-cell,
so the default value is 40.

2-2060

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This parameter affects the difficulty of initiating PBGT handovers. A


Configuration Rule and lower value indicates that PBGT handovers are easier to be initiated.
Adjustment Suggestion If the parameter is set too low, pingpang handovers may occur. If the
parameter is set too high, handovers may not be performed in time.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.51.41 Rx level handover margin of subcell2


Full Name Rx level handover margin of subcell2

Abbreviation HoMarginRxLevSC2

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

According to GSM specifications, handover decisions will be made after a


series of average values have been obtained. In handover caused by the
level, adjacent cells shall be screened and sequenced. The value should
be higher or equal to the threshold. This parameter defines the signal
Description strength threshold to determine handover from adjacent cell to local cell.

Instance Neighbor Cell

Value Range and Step 0..100

Unit N/A

Default Value 40

2-2061

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

The target handover cell generally has a higher level than the local
cell. To avoid being handed over to a worse cell, the quality handover
Default Value
threshold of the first sub-cell is 30 by default.
Configuration Reason
The second sub-cell is generally 10 dB weaker than the first sub-cell,
so the default value is 40.

Strength handover is a relief handover. Set this parameter to a suitable


low value (lower than PBGT threshold) so that handovers based on
Configuration Rule and signal strength can be triggered in time.
Adjustment Suggestion If this parameter is set too low, pingpang or frequent handovers may be
caused. If this parameter is set too high, handover may be delayed and
as a result, the quality becomes worse or call drops may occur.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.51.42 Rx quality handover margin of subcell2


Full Name Rx quality handover margin of subcell2

Abbreviation HoMarginRxQualSC2

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2062

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

PS handover decision can be made at receiving a series of average val-


ues. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description cell through signal quality.

Instance Neighbor Cell

Value Range and Step 0..100

Unit N/A

Default Value 40

The target handover cell generally has a higher level than the local
cell. To avoid being handed over to a worse cell, the quality handover
Default Value
threshold of the first sub-cell is 30 by default.
Configuration Reason
The second sub-cell is generally 10 dB weaker than the first sub-cell,
so the default value is 40.

Quality handover is a relief handover. Set this parameter to a suitable


low value (lower than strength threshold) so that handovers based on
quality can be triggered in time. When the quality is bad, handover is
Configuration Rule and
recommended.
Adjustment Suggestion
If this parameter is set too low, pingpang or frequent handovers may be
caused. If this parameter is set too high, handover may be delayed and
as a result, the quality becomes worse or call drops may occur.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2-2063

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.43 Min Rx level of Neighbour Cell for subcell2


Full Name Min Rx level of Neighbour Cell for subcell2

Abbreviation RxLevMinSC2

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the minimum receiving strength level (on


BCCH) for the MS handover to this cell when the user is working in
the second subcell. It is one of the parameters for determining the
preferential cell during the handover control. The MS in the cell always
monitors the signal strength on BCCH in the adjacent cell, but the cell
can be the candidate for handover until the adjacent cell whose receiving
level is greater than the minimum receiving strength. When the minimum
receiving strength of the MS required by the adjacent cell is greater
than that required by the local cell, handover may occur. In this case,
the MS is on the edge of this cell.
Generally, the value should be close to the receiving sensitivity of the
MS. For the cell with overloaded traffic, you can improve the minimum
access level of the cell, to reduce the C1 and C2 vlaues of the cell.
Consequently, the effective coverage scope is reduced. But the
minimum access level cannot be too large. Otherwise, a bind area
will occur to the boundary between two cells. The level is better to be
no more than -90 dB. During the initial operation of the network, the
value can be set to -101 dBm~-100 dBm or even lower, higher than the
receiving sensitivity -102 dBm of the MS. After the network is expanded
or radio coverage can take place in some areas, the value of some
Description related cells can be increased by 2.

Instance Neighbor Cell

0:< -110dBm
1:-110 ~ -109 dBm
2:-109 ~ -108 dBm
3:-108 ~ -107 dBm
4:-107 ~ -106 dBm
5:-106 ~ -105 dBm
6:-105 ~ -104 dBm
7:-104 ~ -103 dBm
8:-103 ~ -102 dBm
9:-102 ~ -101 dBm
10:-101 ~ -100 dBm
11:-100 ~ -99 dBm
12:-99 ~ -98 dBm
Value Range and Step
13:-98 ~ -97 dBm

2-2064

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

14:-97 ~ -96 dBm


15:-96 ~ -95 dBm
16:-95 ~ -94 dBm
17:-94 ~ -93 dBm
18:-93 ~ -92 dBm
19:-92 ~ -91 dBm
20:-91 ~ -90 dBm
21:-90 ~ -89 dBm
22:-89 ~ -88 dBm
23:-88 ~ -87 dBm
24:-87 ~ -86 dBm
25:-86 ~ -85 dBm
26:-85 ~ -84 dBm
27:-84 ~ -83 dBm
28:-83 ~ -82 dBm
29:-82 ~ -81 dBm
30:-81 ~ -80 dBm
31:-80 ~ -79 dBm
32:-79 ~ -78 dBm
33:-78 ~ -77 dBm
34:-77 ~ -76 dBm
35:-76 ~ -75 dBm
36:-75 ~ -74 dBm
37:-74 ~ -73 dBm
38:-73 ~ -72 dBm
39:-72 ~ -71 dBm
40:-71 ~ -70 dBm
41:-70 ~ -69 dBm
42:-69 ~ -68 dBm
43:-68 ~ -67 dBm
44:-67 ~ -66 dBm
45:-66 ~ -65 dBm
46:-65 ~ -64 dBm
47:-64 ~ -63 dBm
48:-63 ~ -62 dBm
49:-62 ~ -61 dBm
50:-61 ~ -60 dBm
51:-60 ~ -59 dBm
52:-59 ~ -58 dBm
53:-58 ~ -57 dBm
54:-57 ~ -56 dBm
55:-56 ~ -55 dBm
56:-55 ~ -54 dBm
57:-54 ~ -53 dBm

2-2065

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

58:-53 ~ -52 dBm


59:-52 ~ -51 dBm
60:-51 ~ -50 dBm
61:-50 ~ -49 dBm
62:-49 ~ -48dBm
63:> -48 dBm

Unit N/A

Default Value 15

Default Value
Configuration Reason general value

The parameter value should be greater than the minimum cell-level


access power of the corresponding neighbor cell, and be greater than
or equal to the download level handover threshold of the corresponding
neighbor cell. Otherwise, frequent handovers or reselections may occur.
Configuration Rule and In actual condition, properly increase the parameter value to reduce
Adjustment Suggestion the times of frequent handovers. To shorten the handover speed,
for example, in scenarios where the movement is fast, decrease the
parameter value. In a dual-frequency network, to prevent services being
handed over from 900M to 1800M when signal quality is low, increase
the parameter value of the 1800M neighbor cell.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2-2066

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.51.44 Target cell traffic threshold of Subcell2


Full Name Target cell traffic threshold of Subcell2

Abbreviation TargetTrafficThsSC2

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the traffic threshold of the target cell when the
MS operates in the second subcell. It determines whether to perform
handover to this cell. If the traffic in the target cell is greater than this
threshold, do not perform handover to this cell. This parameter is used
Description for 2G handover and reselecting the adjacent cell.

Instance Neighbor Cell

Value Range and Step 0..100

Unit %

Default Value 65

Default Value
Configuration Reason The purpose is to get the resource as well as avoid target cell congestion.

If this parameter is set too high, the target cell may be congested. If this
Configuration Rule and
parameter is set too low, the neighbor cell may get the channel and
Adjustment Suggestion
cannot perform handover.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2-2067

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.45 Handover Priority Indication when serve cell shuttingdown


Full Name Handover Priority Indication when serve cell shuttingdown

Abbreviation PwDownHoPriInd

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates a handover priority of traffic neighbor cell when


Description the serving cell is powered down.

Instance Neighbor Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason The system automatically selects a target handover cell.

Configuration Rule and


Adjustment Suggestion If the users need to customize a target handover cell, the value is set to 1.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2-2068

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.51.46 Is The Related Cell In dual- Frequency Network


Full Name Is The Related Cell In dual- Frequency Network

Abbreviation IsDualFreqRltCell

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter determines whether the related cell is located in an en-


Description hanced dual-frequency network.

Instance Cell

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value Neighbor cells should not be set as the related cell in a dual-frequency
Configuration Reason network.

Configuration Rule and If the neighbor cell has balanced traffic and the same coverage as the
Adjustment Suggestion local cell, it can be set as the related cell in a dual-frequency network.

Change Mode Offline

ZGO-04-01-005 IRC
Related features ZGO-04-01-009 STIRC

Related Parameters N/A

1.
A local cell is associated with only one cell in a dual-frequency network.
2.The two cells are set as a neighbor cell of each other, and the local cell
Relationship
is also set as the related cell of the other cell in a dual-frequency network.
3.The two cells must be located in one control main processor (CMP)
board.

Related Interfaces Abis

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

2-2069

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail New

2.51.47 Downlink rapid handover threshold for SDCCH


Full Name Downlink rapid handover threshold for SDCCH

Abbreviation SDDLRapidHoThs

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Sets the threshold for a downlink rapid SDCCH handover. A series of


measurement reports retermine whether a downlink rapid SDCCH han-
Description dover is triggered.

Instance Neighbor Cell

0:< -110dBm
1:-110 ~ -109 dBm
2:-109 ~ -108 dBm
3:-108 ~ -107 dBm
4:-107 ~ -106 dBm
5:-106 ~ -105 dBm
6:-105 ~ -104 dBm
7:-104 ~ -103 dBm
8:-103 ~ -102 dBm
9:-102 ~ -101 dBm
10:-101 ~ -100 dBm
11:-100 ~ -99 dBm
12:-99 ~ -98 dBm
13:-98 ~ -97 dBm
14:-97 ~ -96 dBm
15:-96 ~ -95 dBm
16:-95 ~ -94 dBm
17:-94 ~ -93 dBm
18:-93 ~ -92 dBm
19:-92 ~ -91 dBm
20:-91 ~ -90 dBm
21:-90 ~ -89 dBm
22:-89 ~ -88 dBm
23:-88 ~ -87 dBm
24:-87 ~ -86 dBm
25:-86 ~ -85 dBm
Value Range and Step
26:-85 ~ -84 dBm

2-2070

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

27:-84 ~ -83 dBm


28:-83 ~ -82 dBm
29:-82 ~ -81 dBm
30:-81 ~ -80 dBm
31:-80 ~ -79 dBm
32:-79 ~ -78 dBm
33:-78 ~ -77 dBm
34:-77 ~ -76 dBm
35:-76 ~ -75 dBm
36:-75 ~ -74 dBm
37:-74 ~ -73 dBm
38:-73 ~ -72 dBm
39:-72 ~ -71 dBm
40:-71 ~ -70 dBm
41:-70 ~ -69 dBm
42:-69 ~ -68 dBm
43:-68 ~ -67 dBm
44:-67 ~ -66 dBm
45:-66 ~ -65 dBm
46:-65 ~ -64 dBm
47:-64 ~ -63 dBm
48:-63 ~ -62 dBm
49:-62 ~ -61 dBm
50:-61 ~ -60 dBm
51:-60 ~ -59 dBm
52:-59 ~ -58 dBm
53:-58 ~ -57 dBm
54:-57 ~ -56 dBm
55:-56 ~ -55 dBm
56:-55 ~ -54 dBm
57:-54 ~ -53 dBm
58:-53 ~ -52 dBm
59:-52 ~ -51 dBm
60:-51 ~ -50 dBm
61:-50 ~ -49 dBm
62:-49 ~ -48dBm
63:> -48 dBm

Unit N/A

Default Value 10

Default Value In terms of the configuration experience, the handover is performed in


Configuration Reason time if the parameter value is set to 10.

Configuration Rule and When an MS is moving rapidly, a handover is triggered if the electricity
Adjustment Suggestion level of a neighbor cell reaches the threshold.

2-2071

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.51.48 Downlink rapid handover N for SDCCH


Full Name Downlink rapid handover N for SDCCH

Abbreviation SDDLRapidHoN

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Sets the threshold for a downlink rapid SDCCH handover. A series of


measurement reports determine whether a downlink rapid SDCCH han-
Description dover is triggered.

Instance Neighbor Cell

Value Range and Step 1..20

Unit N/A

Default Value 2

Default Value
Configuration Reason The handover is performed in time if the parameter value is set to 2.

Configuration Rule and A rapid handover is performed when an MS is moving rapidly. A


Adjustment Suggestion handover decision is made in a shorter time if the N value is set lower.

Change Mode Offline

Related features ZGO-04-02-005 Co-BCCH

2-2072

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters ShoEnable

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version UR11.2 B

Parameter Modifying
Detail New

2.51.49 Good level and bad quality handover NCell MARGIN


Full Name Good level and bad quality handover NCell MARGIN

Abbreviation GoodLevBadRQoffSet

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

During good level and bad quality handover, this parameter indicates how
much the downlink level of a neighbor cell drops from that of the serving
cell. The unit is dB. It describes the mapping relationship with the downlink
level of the serving cell. The downlink level range is (>= -60, -60 to -70, -70
Description to -75, -75 to -85, < -85).

Instance Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value [20,15,10,5,0]

Default Value The level offset is calculated according to the data of call drop due to
Configuration Reason bad voice quality.

When it is difficult to initiate a handover due to good level and bad quality,
Configuration Rule and
decrease the offset. After enabling this function, pay attention to the call
Adjustment Suggestion
drop rate. If the call drop rate deteriorates, increase the offset.

Change Mode Offline

2-2073

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.50 Forbid Period For non-Emergency Handover


Full Name Forbid Period For non-Emergency Handover

Abbreviation ForbidNonEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of non-emergency handover, the forbid period of handover to


the neighbor cell is counted from the time when the system measures the
cell for the first time. The unit is the period of generating a measurement
report. For preprocessing measurement reports, the unit is converted into
the period of generating an ordinary measurement report according to the
preprocessing period. In the forbid period, the neighbor cell is not selected
for non-emergency handover. When failing to measure the neighbor cell,
the system does not record it in the neighbor cell list. When measuring the
Description neighbor cell again, the system validates the forbid period.

Instance Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value is 0 (off).

2-2074

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

This function is usually applied in the high-speed rail scenario. In


dedicated cells of high-speed rails, public cells are configured as their
neighbor cells. To avoid the forbid period set during a handover from MSs
in the dedicated network to the public network, the system forbids the
Configuration Rule and MSs to migrate to the neighbor cell through a non-emergency handover
Adjustment Suggestion within a certain period, which is used as a supplement to inaccurate speed
measurement. The forbid period can be set according to the time for the
MSs to pass through the cell. This function can also be applied in other
scenarios. When using this function, pay attention to the KPIs such as
handover success rate and call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.51 Forbid Period For Emergency Handover


Full Name Forbid Period For Emergency Handover

Abbreviation ForbidEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2075

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

In the case of emergency handover, the forbid period of handover to the


neighbor cell is counted from the time when the system measures the cell for
the first time. The unit is the period of generating a measurement report. For
preprocessing measurement reports, the unit is converted into the period of
generating an ordinary measurement report according to the preprocessing
period. In the forbid period, the neighbor cell is not selected for emergency
handover. When failing to measure the neighbor cell, the system does not
record it in the neighbor cell list. When measuring the neighbor cell again,
Description the system validates the forbid period.

Instance Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value is 0 (off).

This function is usually applied in the high-speed rail scenario. In


dedicated cells of high-speed rails, public cells are configured as their
neighbor cells. To avoid the forbid period set during a handover from
MSs in the dedicated network to the public network, the system forbids
Configuration Rule and the MSs to migrate to the neighbor cell through an emergency handover
Adjustment Suggestion within a certain period, which is used as a supplement to inaccurate speed
measurement. The forbid period can be set according to the time for the
MSs to pass through the cell. This function can also be applied in other
scenarios. When using this function, pay attention to the KPIs such as
handover success rate and call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

2-2076

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.51.52 Cell reselection priority


Full Name Cell reselection priority

Abbreviation CellChangePriority

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter describes the priority of the neighbor cell reselected. The
Description higher the value, the higher the priority.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and When some cells are expected to be used for reselection, increase their
Adjustment Suggestion priority.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2077

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.53 Avoid Ping-Pang cell reselection Timer


Full Name avoid Ping-Pang cell reselection Timer

Abbreviation TPingPang

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Avoid NC2 ping-pang cell reselection timer

Instance Cell

Value Range and Step 0..31

Unit s

Default Value 15

Default Value The value is set to 15s by the principle of 15s of previous cell reselection
Configuration Reason minus hysteresis.

Configuration Rule and


Adjustment Suggestion Not available temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.54 Target cell traffic threshold


Full Name target cell traffic threshold

Abbreviation TargetCellTrafficThr

2-2078

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Maximum traffic load threshold of MSs reselected to the target cell

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason The load of a target cell should not be too high.

Configuration Rule and The smaller the value, the higher the requirement on the load of the target
Adjustment Suggestion cell. To select a cell with small load, decrease the value.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.55 Penalty Period For non-Emergency Handover


Full Name Penalty Period For non-Emergency Handover

Abbreviation PenaltyNonEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2079

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

In the case of non-emergency handover, the penalty period of handover to


the neighbor cell is counted from the time when the system measures the
cell for the first time. The unit is the period of generating a measurement
report. For preprocessing measurement reports, the unit is converted into
the period of generating an ordinary measurement report according to the
preprocessing period. In the penalty period, the neighbor cell is not se-
lected for non-emergency handover. When sorting neighbor cells, the sys-
tem takes the penalty level "PenaltyLevNonEmergHo" into consideration.
For the penalty level, a negative number refers to penalty and a positive
number refers to award. When failing to measure the neighbor cell, the
system does not record it in the neighbor cell list. When measuring the
Description neighbor cell again, the system validates the penalty period.

Instance Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value is 0 (off).

This function is usually applied in the high-speed rail scenario. In


dedicated cells of high-speed rails, public cells are configured as their
neighbor cells. To avoid the penalty period set during a handover
from MSs in the dedicated network to the public network, the system
Configuration Rule and reduces the probability of MSs in migrating to the neighbor cell through
Adjustment Suggestion a non-emergency handover within a certain period, which is used as a
supplement to inaccurate speed measurement. The penalty period can be
set according to the time for the MSs to pass through the cell. This function
can also be applied in other scenarios. When using this function, pay
attention to the KPIs such as handover success rate and call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2080

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.56 Penalty Period For Emergency Handover


Full Name Penalty Period For Emergency Handover

Abbreviation PenaltyEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of emergency handover, the penalty period of handover to the


neighbor cell is counted from the time when the system measures the cell
for the first time. The unit is the period of generating a measurement re-
port. For preprocessing measurement reports, the unit is converted into
the period of generating an ordinary measurement report according to the
preprocessing period. In the penalty period, the neighbor cell is not se-
lected for emergency handover. When sorting neighbor cells, the system
takes the penalty level "PenaltyLevNonEmergHo" into consideration. For
the penalty level, a negative number refers to penalty and a positive num-
ber refers to award. When failing to measure the neighbor cell, the system
does not record it in the neighbor cell list. When measuring the neighbor
Description cell again, the system validates the penalty period.

Instance Neighbor Cell

Value Range and Step 0..65535

Unit N/A

Default Value 0

Default Value
Configuration Reason The default value is 0 (off).

This function is usually applied in the high-speed rail scenario. In


dedicated cells of high-speed rails, public cells are configured as their
neighbor cells. To avoid the penalty period set during a handover from MSs
Configuration Rule and in the dedicated network to the public network, the system reduces the
Adjustment Suggestion probability of MSs in migrating to the neighbor cell through an emergency
handover within a certain period, which is used as a supplement to
inaccurate speed measurement. The penalty period can be set according
to the time for the MSs to pass through the cell. This function can also be

2-2081

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

applied in other scenarios. When using this function, pay attention to the
KPIs such as handover success rate and call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.57 Penalty Level For non-Emergency Handover


Full Name Penalty Level For non-Emergency Handover

Abbreviation PenaltyLevNonEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of non-emergency handover, this parameter indicates the


penalty level during a penalty period. For the penalty level, a negative
number refers to penalty and a positive number refers to award. For
Description details, refer to PenaltyLevNonEmergHo.

Instance Neighbor Cell

2-2082

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0:-48dB 1:-47dB 2:-46dB 3:-45dB 4:-44dB 5:-43dB 6:-42dB 7:-41dB


8:-40dB 9:-39dB 10:-38dB 11:-37dB 12:-36dB 13:-35dB 14:-34dB
15:-33dB 16:-32dB 17:-31dB 18:-30dB 19:-29dB 20:-28dB 21:-27dB
22:-26dB 23:-25dB 24:-24dB 25:-23dB 26:-22dB 27:-21dB 28:-20dB
29:-19dB 30:-18dB 31:-17dB 32:-16dB 33:-15dB 34:-14dB 35:-13dB
36:-12dB 37:-11dB 38:-10dB 39:-9dB 40:-8dB 41:-7dB 42:-6dB 43:-5dB
44:-4dB 45:-3dB 46:-2dB 47:-1dB 48:0dB 49:+1dB 50:+2dB 51:+3dB
52:+4dB 53:+5dB 54:+6dB 55:+7dB 56:+8dB 57:+9dB 58:+10dB 59:+11dB
60:+12dB 61:+13dB 62:+14dB 63:+15dB 64:+16dB 65:+17dB 66:+18dB
67:+19dB 68:+20dB 69:+21dB 70:+22dB 71:+23dB 72:+24dB 73:+25dB
74:+26dB 75:+27dB 76:+28dB 77:+29dB 78:+30dB 79:+31dB 80:+32dB
81:+33dB 82:+34dB 83:+35dB 84:+36dB 85:+37dB 86:+38dB 87:+39dB
88:+40dB 89:+41dB 90:+42dB 91:+43dB 92:+44dB 93:+45dB 94:+46dB
Value Range and Step 95:+47dB 96:+48dB

Unit N/A

Default Value 48

Default Value The default value is 48 (0 dB). The specific penalty level is determined
Configuration Reason as required.

This parameter is usually set to a negative value. To make a penalty on


Configuration Rule and
a neighbor cell, forbid MSs to migrate to the cell and meanwhile pay
Adjustment Suggestion
attention to the call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2083

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.58 Penalty Level For Emergency Handover


Full Name Penalty Level For Emergency Handover

Abbreviation PenaltyLevEmergHo

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

In the case of emergency handover, this parameter indicates the penalty


level during a penalty period. For the penalty level, a negative number
refers to penalty and a positive number refers to award. For details, refer
Description to PenaltyEmergHo.

Instance Neighbor Cell

0:-48dB 1:-47dB 2:-46dB 3:-45dB 4:-44dB 5:-43dB 6:-42dB 7:-41dB


8:-40dB 9:-39dB 10:-38dB 11:-37dB 12:-36dB 13:-35dB 14:-34dB
15:-33dB 16:-32dB 17:-31dB 18:-30dB 19:-29dB 20:-28dB 21:-27dB
22:-26dB 23:-25dB 24:-24dB 25:-23dB 26:-22dB 27:-21dB 28:-20dB
29:-19dB 30:-18dB 31:-17dB 32:-16dB 33:-15dB 34:-14dB 35:-13dB
36:-12dB 37:-11dB 38:-10dB 39:-9dB 40:-8dB 41:-7dB 42:-6dB 43:-5dB
44:-4dB 45:-3dB 46:-2dB 47:-1dB 48:0dB 49:+1dB 50:+2dB 51:+3dB
52:+4dB 53:+5dB 54:+6dB 55:+7dB 56:+8dB 57:+9dB 58:+10dB 59:+11dB
60:+12dB 61:+13dB 62:+14dB 63:+15dB 64:+16dB 65:+17dB 66:+18dB
67:+19dB 68:+20dB 69:+21dB 70:+22dB 71:+23dB 72:+24dB 73:+25dB
74:+26dB 75:+27dB 76:+28dB 77:+29dB 78:+30dB 79:+31dB 80:+32dB
81:+33dB 82:+34dB 83:+35dB 84:+36dB 85:+37dB 86:+38dB 87:+39dB
88:+40dB 89:+41dB 90:+42dB 91:+43dB 92:+44dB 93:+45dB 94:+46dB
Value Range and Step 95:+47dB 96:+48dB

Unit N/A

Default Value 48

Default Value The default value is 48 (0 dB). The specific penalty level is determined
Configuration Reason as required.

This parameter is usually set to a negative value. To make a penalty on


Configuration Rule and
a neighbor cell, forbid MSs to migrate to the cell and meanwhile pay
Adjustment Suggestion
attention to the call drop rate.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-2084

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.59 NC2 RxQual margin


Full Name NC2 RxQual margin

Abbreviation NC2MarginRxQual

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Minimum quality threshold of MSs selected to the neighbor cell according


Description to quality criteria

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 30

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and The larger the value, the higher the quality of the selected target cell and
Adjustment Suggestion the better the user experience. However, it is difficult to find a qualified cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-2085

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.60 NC2 RxLev margin


Full Name NC2 RxLev margin

Abbreviation NC2MarginRxLev

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Minimum level threshold of MSs selected to the neighbor cell according to


Description level criteria

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 30

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and The larger the value, the higher the level of the selected target cell and the
Adjustment Suggestion better the user experience. However, it is difficult to find a qualified cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2086

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.61 NC2 Reselection hysteresis Threshold


Full Name NC2 Reselection hysteresis Threshold

Abbreviation NC2ResHys

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Hysteresis level when the downlink level of the target cell that can be
switched to this cell through reselection is higher than that of the serving
Description cell

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 3

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Not available temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

2-2087

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Detail None

2.51.62 NC2 reselection DL RxLevel Threshold


Full Name NC2 reselection DL RxLevel Threshold

Abbreviation NC2ResThr

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Downlink level threshold of the target cell that can be switched to a better
cell through reselection. The threshold is higher than the level threshold
Description that triggers cell reselection.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 35

Default Value
Configuration Reason The threshold is higher than the downlink level threshold.

The smaller the value, the higher the probability of initiating PBGT
Configuration Rule and
reselection, selecting a better neighbor cell for MSs and improving user
Adjustment Suggestion
experience. However, the reselection times increase.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

2-2088

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Detail None

2.51.63 NC2 PBGT margin


Full Name NC2 PBGT margin

Abbreviation NC2MarginPBGT

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Minimum PBGT threshold of MSs selected to the neighbor cell according


Description to PBGT criteria

Instance Cell

Value Range and Step 0..48

Unit N/A

Default Value 30

Default Value
Configuration Reason Set according to normal cases

The larger the value, the higher the PBGT value of the selected target
Configuration Rule and
cell and the better the user experience. However, it is difficult to find
Adjustment Suggestion
a qualified cell.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2089

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.51.64 NC2 neighbour cell RXLEV_ACCESS_MIN


Full Name NC2 neighbour cell RXLEV_ACCESS_MIN

Abbreviation NC2RxLevMin

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Minimum receive level of MSs selected to the neighbor cell

Instance Cell

0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Value Range and Step dBm 60:-51 ~ -50 dBm 61:-50 ~ -49 dBm 62:-49 ~ -48dBm 63:> -48 dBm

Unit N/A

Default Value 15

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Not available temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-2090

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.51.65 NC2 neighbour cell MS_TXPWR_MAX


Full Name NC2 neighbour cell MS_TXPWR_MAX

Abbreviation NC2MsTxPwrMax

Managed Object Adjacent GSM Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Maximum output power of MSs in the neighbor cell

Instance Cell

Value Range and Step 0..31

Unit N/A

Default Value 5

Default Value
Configuration Reason Set according to normal cases

Configuration Rule and


Adjustment Suggestion Not available temporarily

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent GSM Cell
Configuration

2-2091

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.52 Interfere Gsm Cell


Configuration(GGsmIntfRelation)
2.52.1 Interfere Gsm Cell Configuration ID
Full Name Interfere Gsm Cell Configuration ID

Abbreviation GGsmIntfRelation

Managed Object Interfere Gsm Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Interfere Gsm Cell Configuration ID

Instance None

Value Range and Step 1..6

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Interfere Gsm Cell
Configuration

2-2092

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.52.2 GsmIntfRelation Sequence


Full Name GsmIntfRelation Sequence

Abbreviation GGsmIntfRelationSeq

Managed Object Interfere Gsm Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the No. of the interference adjacent cell.

Instance GsmRelation

Value Range and Step 1..6

Unit N/A

Default Value 0

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Interfere Gsm Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2093

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.52.3 GGsmCell DN
Full Name GGsmCell DN

Abbreviation refGGsmCell

Managed Object Interfere Gsm Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the quoted GSM source cell.

Instance GsmRelation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Interfere Gsm Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.52.4 GExternalGsmCell DN
Full Name GExternalGsmCell DN

Abbreviation refGExternalGsmCell

2-2094

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Managed Object Interfere Gsm Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the quoted external GSM source cell.

Instance GsmRelation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Interfere Gsm Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.53 Visit Paging Cell(GGsmVpcRelation)


2.53.1 Visit Paging Cell ID
Full Name Visit Paging Cell ID

Abbreviation GGsmVpcRelation

Managed Object Visit Paging Cell

2-2095

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

3GPP Name N/A

3GPP Reference N/A

Description Visit Paging Cell ID

Instance None

Value Range and Step 1..128

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Adjacent Relation Configuration->Visit Paging Cell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.53.2 VPC Id
Full Name VPC Id

Abbreviation GGsmVpcRelationSeq

Managed Object Visit Paging Cell

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the VPC cell ID.

Instance GsmRelation

2-2096

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Value Range and Step 2..128

Unit N/A

Default Value 1

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Adjacent Relation Configuration->Visit Paging Cell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.53.3 DN of GGsmCell
Full Name DN of GGsmCell

Abbreviation refGGsmCell

Managed Object Visit Paging Cell

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the quoted GSM source cell.

Instance GsmRelation

Value Range and Step None

Unit N/A

Default Value NA

2-2097

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features ZGO-02-01-002

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Adjacent Relation Configuration->Visit Paging Cell

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54 Adjacent UTRAN Cell


Configuration(GUtranRelation)
2.54.1 UTRAN Relation type
Full Name UTRAN Relation type

Abbreviation RelationType

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the UTRAN adjacent cell to which the handover
and reselection are performed, only reselction is performed, or only han-
Description dover is performed.

Instance External Utran Relation

2-2098

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: Handover and reselect


1: Reselect
Value Range and Step 2: Handover

Unit N/A

Default Value 0

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.2 Adjacent UTRAN Cell Configuration ID


Full Name Adjacent UTRAN Cell Configuration ID

Abbreviation GUtranRelation

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Adjacent UTRAN Cell Configuration ID

Instance None

Value Range and Step 1..192

Unit N/A

2-2099

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.3 DN of UTRAN FDD source cell


Full Name DN of UTRAN FDD source cell

Abbreviation refGExternalUtranCellFDD

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the quoted DN of UTRAN TDD source cell.

Instance External Utran Relation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

2-2100

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.4 DN of UTRAN TDD source cell


Full Name DN of UTRAN TDD source cell

Abbreviation refGExternalUtranCellTDDLcr

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the quoted DN of UTRAN TDD source cell.

Instance External Utran Relation

Value Range and Step None

Unit N/A

Default Value NA

Default Value This parameter should be configured according


Configuration Reason to radio parameter planning.

Configuration Rule and This parameter should be configured according


Adjustment Suggestion to radio parameter planning.

Change Mode Offline

2-2101

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.5 UTRAN Relation Sequence


Full Name UTRAN Relation Sequence

Abbreviation GUtranRelationSeq

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the UTRAN adjacent cell number.

Instance External Utran Relation

{RelationType==1}[1..64],
{RelationType==2}[65..128],
Value Range and Step {RelationType==0}[129..192]

Unit N/A

Default Value NA

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

2-2102

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.6 RSCP offset handover to UTRAN adjacent cell


Full Name RSCP offset handover to UTRAN adjacent cell

Abbreviation HoRSCPOffset3G

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name TDD_Qoffset FDD_Qoffset

3GPP Reference 3GPP TS 45.008

Handover from GSM to UTRAN being triggered only indicates that


UTRAN adjacent cell satisfies the minimum requirement for normal UE
communication within it.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
UE to handover to different adjacent cells.
When the adjacent cell is the cell to which the handover and reselection
Description are performed, set this parameter.

Instance Cell

Value Range and Step 0..63

Unit N/A

Default Value 5

Default Value This parameter should be set according to the


Configuration Reason radio environment of the border area of 2/3G.

2-2103

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

If this parameter is set too low, it is easy to trigger a handover to a 3G


Configuration Rule and adjacent cell;
Adjustment Suggestion If this parameter is set too high, it is difficult to trigger a handover to
a 3G adjacent cell.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters FDDRepQntCS

Relationship This parameter takes effect only when FDDRepQntCS is 0;

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.7 Ec/No offset handover to UTRAN adjacent cell


Full Name Ec/No offset handover to UTRAN adjacent cell

Abbreviation HoEcNoOffset3G

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name FDD_Qmin_Offset

3GPP Reference 3GPP TS 45.008

Handover from GSM to UTRAN being triggered only indicates that


UTRAN adjacent cell satisfies the minimum requirement for normal UE
communication within it.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
UE to handover to different adjacent cells.
When the adjacent cell is the cell to which the handover and reselection
Description are performed, set this parameter.

Instance Cell

Value Range and Step 0..49

2-2104

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 5

Default Value This parameter should be set according to the


Configuration Reason radio environment of the border area of 2/3G.

If this parameter is set too low, it is easy to trigger a handover to a 3G


Configuration Rule and adjacent cell;
Adjustment Suggestion If this parameter is set too high, it is difficult to trigger a handover to
a 3G adjacent cell.

Change Mode Offline

Related features ZGO-02-03-002 GSM/WCDMA Interworking Phase I

Related Parameters FDDRepQntCS

This parameter takes effect only when FDDRepQntCS


Relationship
is 1;

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.8 CS adjacent cell report priority


Full Name CS adjacent cell report priority

Abbreviation RepPrioCS

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

2-2105

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

This parameter indicates the priority of measurement reports reported.


It is broadcast to the MS in SI2quater, PSI3ter, and PSI3quater. The
priorityt of adjacent cells reported is as follows:
1. Adjacent cells with the same frequency band. These cells must meet
the following requirements: a. The BSIC color code is valid. b. The
measured field strength ranks highly in cells with the same frequency
band, is equal to or greater than the lower limit of RprtThoPSXXX (XXX
indicates the frequency band of a serving cell).
2. Adjacent cells with different frequency bands . These cells must meet
the following requirements: a. The BSIC color code is valid. b. The
measured field strength ranks highly in cells with the same frequency
band, is equal to or greater than the lower limit of RprtThoPSXXX (XXX
indicates that the frequency band is different from that of the serving cell).
3. Other access technologies, such as adjacent cells of UTRAN/FDD.
These cells must meet the following requirements: a. The cell's scramble
code is correct. b. The measured field stength of cells with the same
access technology (such as UTRAN/FDD) ranks highly, is greater than
or equal to the lower limit of XXXRprtThoPS (XXX indicates the access
technology, such as WCDMA/FDD).
For the three priorities mentioned above, if there are remainling adjacent
cells in one priority, they will be transformed to adjacent cells in the next
priority. Cells with access technologies (such as UTRAN/FDD), with
high RepPrioCS, and a tfrequency bands (such as GSM900M) takes
priority). For cells with the same RepPrioCS, the large cell and the
cell of RprtThoCSXXX (or XXXRprtThoCS) and RprtOffsetCSXXX (or
Description XXXRprtOffsetCS) take the priority.

Instance Cell

0: low
Value Range and Step 1: high

Unit N/A

Default Value 0

Default Value
Configuration Reason normal setting

Configuration Rule and No modification after configuration if there


Adjustment Suggestion is no special demands.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

2-2106

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.9 PS adjacent cell report priority


Full Name PS adjacent cell report priority

Abbreviation RepPrioPS

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name REP_PRIORITY

3GPP Reference 3GPP TS 45.008

This parameter indicates the priority of measurement reports reported.


It is broadcast to the MS in SI2quater, PSI3ter, and PSI3quater. The
priorityt of adjacent cells reported is as follows:
1. Adjacent cells with the same frequency band. These cells must meet
the following requirements: a. The BSIC color code is valid. b. The
measured field strength ranks highly in cells with the same frequency
band, is equal to or greater than the lower limit of RprtThoPSXXX (XXX
indicates the frequency band of a serving cell).
2. Adjacent cells with different frequency bands . These cells must meet
the following requirements: a. The BSIC color code is valid. b. The
measured field strength ranks highly in cells with the same frequency
band, is equal to or greater than the lower limit of RprtThoPSXXX (XXX
indicates that the frequency band is different from that of the serving cell).
3. Other access technologies, such as adjacent cells of UTRAN/FDD.
These cells must meet the following requirements: a. The cell's scramble
code is correct. b. The measured field stength of cells with the same
access technology (such as UTRAN/FDD) ranks highly, is greater than
or equal to the lower limit of XXXRprtThoPS (XXX indicates the access
technology, such as WCDMA/FDD).
For the three priorities mentioned above, if there are remainling adjacent
cells in one priority, they will be transformed to adjacent cells in the

Description next priority. The remaining cells, after each priority is reported, will

2-2107

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

be transformed to other GSM cells and other access technology. The


remaing adjacent cells can also be reported even their signal strength
does not meet the threshold. Except for cells with high reporting priority
as indicated by the parameter RepPrioPS, these cells may be reported
less frequently (if ReportRate is 1), if indicated by the parameter
REPORTING_RATE, but at least once in four consecutive measurement
reports.

Instance Cell

0: low
Value Range and Step 1: high

Unit N/A

Default Value 0

Default Value
Configuration Reason recommended in 3GPP, default value isnormal

For the last priority setting of the measurement


report from adjacent cells, if the cells with higher priorities are
expected to report, RepPrioPS for an adjacent cell should be set high.
Configuration Rule and
Then the measurement results will be reported every time. In most
Adjustment Suggestion
cases every adjacent cell is treated the same. Cells with low priorities
does not report frequently (when ReportRatePS is set to 1), RepPrioPS
is recommended to be set with the default value.

Change Mode Offline

Related features N/A

Related Parameters ReportRatePS

The parameter RepPrioPS configures every adjacent


cell; the parameter RepRatePS configures the current cell. The two
Relationship
parameters determines the measurement report hand-in frequency in
the adjacent cell.

Related Interfaces Um

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2108

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.54.10 Target cell traffic threshold


Full Name Target cell traffic threshold

Abbreviation TargetCellTrafficThs

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indciates the threshold for the target cell traffic. It deter-
mines whether to perform handover to this cell. If the target cell traffic is
higher than this threshold, then the handover is not performed to this cell.
Description This parameter is used for UTRAN handover and selecting adjacent cells.

Instance Cell

Value Range and Step 0..100

Unit %

Default Value 75

Default Value The resources should be obtained and at the


Configuration Reason same time the congestion in target cell should be avoided.

Configuration Rule and If the parameter is set too high, congestion


Adjustment Suggestion will be likely to happen in the target cell.

Change Mode Offline

Related features ZGB-02-02-001 Basic Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2109

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.54.11 RSCP offset


Full Name RSCP offset

Abbreviation HoRSCPOffset3G_PS

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

If the handover from GSM to UTRAN is triggered, it indicates that UE can


communicate properly in the neighbor cells of UTRAN. This parameter
is specified as the prerequisite for 2G/3G PS handover, to ensure that
the uplink and downlink of UTRAN neighbor cells can get enough field
strengh, and the priority of UE performing PS handover to different neigh-
Description bor cells is controlled.

Instance External Neighbor Cell

Value Range and Step 0..63

Unit N/A

Default Value 5

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2110

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.54.12 EcNo offset


Full Name EcNo offset

Abbreviation HoEcNoOffset3G_PS

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

If the handover from GSM to UTRAN is triggered, it indicates that UE can


communicate properly in the neighbor cells of UTRAN. This parameter
is specified as the prerequisite for 2G/3G PS handover, to ensure that
the uplink and downlink of UTRAN neighbor cells can get enough field
strengh, and the priority of UE performing PS handover to different neigh-
Description bor cells is controlled.

Instance External Neighbor Cell

Value Range and Step 0..49

Unit N/A

Default Value 5

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2111

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.54.13 Target cell traffic threshold(PS)


Full Name Target cell traffic threshold(PS)

Abbreviation TargetCellTraThs_PS

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the threshold for the traffic of the target 3G cell
during 2G/3G handover. It determines whether to perform PS handover
to this cell. If the traffic in the target cell is higher than this threshold, then
Description the PS handover is not performed towards this cell.

Instance External Neighbor Cell

Value Range and Step 0..100

Unit %

Default Value 70

Default Value
Configuration Reason configure by normal wireless environment

Configuration Rule and This function is not in commercial use in this


Adjustment Suggestion version. The default value is recommended.

Change Mode Offline

Related features ZGO-02-02-016 PS Handover

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2112

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.54.14 CCN support


Full Name CCN support

Abbreviation CCNSUPPORT

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name CCN_ACTIVE

3GPP Reference 3GPP TS 44.060

Through the CCN_ACTIVE parameter carried in GPRS Cell Options IE


of BCCHSI13, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM neighbor cell.
When the CCN_ACTIVE parameter is not carried in the GPRS Cell
Options IE or it is disabled, the MS will not enter the CCN mode. When
the CCN_ACTIVE parameter of the local cell is enabled, and the cell is
bound to be reselected to other GSM neighbor cell, user should also
check whether the CCN_SUPPORTED parameter of the neghbor cell
exists. If it does not exist, the MS is supposed to enable the CCN
mode towards all neighbor cells. If it exists, set the CCN mode as
disabled, then the MS cannot enter the mode. If the CCN_SUPPORTED
parameter exists, set the CCN mode as enabled, then the MS can
enter the mode.
Through the PACKET MEASUREMENT ORDER message the
network side can indicate the MS whether to enable the CCN_ACTIVE
parameter in the serving cell. It, through the PACKET CELLl CHANGE
ORDER or PS HANDOVER COMMAND message to indicate the MS
whether to enable the CCN_ACTIVE parameter in the target cell. The
setting of the CCN_ACTIVE parameter of the message on the PACCH
channel takes priority over that of the CCN_ACTIVE parameter in the
broadcast system message. The MS only uses the CCN mode under
Description the NC0 and NC1 modes.

Instance Cell

Value Range and Step 0..1

Unit N/A

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Normally proposed value is yes.If the serving cell's CCN active is


enabled, and the neighbour cell's CCN support is enabled, the CCN
Configuration Rule and
mode is used when reselect to the neighbour cell;If the neighbour cell's
Adjustment Suggestion
CCN support is not enabled, the CCN mode is not used when reselect to
the neighbour cell.

Change Mode Offline

2-2113

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related features ZGO-02-02-010 Network-assisted Cell Change

Related Parameters NACCSupport


CCNActive
SIStatusInd

NACC should be enabled simultaneously with CCNActive/SISta-


Relationship
tusInd/CCNSupport.

Related Interfaces Um

Impact on Equipment 0

Impact on service 1

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.54.15 the priority of Utran Cell


Full Name the priority of Utran Cell

Abbreviation UtranCellPrio

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name UTRAN_PRIORITY

3GPP Reference 3GPP TS 44.018

Description This parameter indicates the priority of UTRAN neighbor cells.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 1

Default Value The value of this parameter is the same as


Configuration Reason that of UtranDefaultPrio.

When the MS uses the reselection algorithm with high priority, the value
Configuration Rule and should be greater than that of ServCellPrio.
Adjustment Suggestion When the MS uses the reselection algorithm with low priority, the value
should be smaller than that of ServCellPrio.

2-2114

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters PrioReselSupportServCellPrioUtranDefaultPrio

When the PrioReselSupport switch is enabled,


Relationship the value of UtranCellPrio cannot be the same as that of ServCellPrio,
and the default value equals to that of UtranDefaultPrio.

Related Interfaces Um interface

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.54.16 Is the directed retry ncell


Full Name Is the directed retry ncell

Abbreviation DirectRetryCell

Managed Object Adjacent UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

The parameter is used to indicate whether the neighbor cell is the directed
Description retry cell. It is one of the neighbor cell parameters.

Instance External Utran Relation

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 1

Default Value This parameter is related to special functions, so the default value is
Configuration Reason set as "Yes".

Configuration Rule and If the network planning requires the cell to


Adjustment Suggestion be a directed retry cell, set the parameter to "Yes".

2-2115

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell
Configuration

Parameter Modifying
Version UR11.2 A

Parameter Modifying
Detail New

2.55 Adjacent E-UTRAN Cell


Configuration(GEutranRelation)
2.55.1 Adjacent E-UTRAN Cell Configuration ID
Full Name Adjacent E-UTRAN Cell Configuration ID

Abbreviation GEutranRelation

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description Adjacent E-UTRAN Cell Configuration ID

Instance None

Value Range and Step 1..64

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-2116

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.2 DN of E-UTRAN FDD source cell


Full Name DN of E-UTRAN FDD source cell

Abbreviation refGExternalEutranCellFDD

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

User can select an internal cell identified by siteid-btsid or an external cell


Description identified by ECID.

Instance External EUtran Neighbor Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

2-2117

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.3 DN of E-UTRAN TDD source cell


Full Name DN of E-UTRAN TDD source cell

Abbreviation refGExternalEutranCellTDD

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

User can select an internal cell identified by siteid-btsid or an external cell


Description identified by ECID.

Instance External EUtran Neighbor Cell

Value Range and Step None

Unit N/A

Default Value NA

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

2-2118

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.4 UTRAN Relation Sequence


Full Name UTRAN Relation Sequence

Abbreviation GEutranRelationSeq

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the No. of E-UTRAN neighbor cells.

Instance External Utran Relation

Value Range and Step 1..64

Unit N/A

Default Value NA

Default Value
Configuration Reason The value is generated by the system by default.

Configuration Rule and


Adjustment Suggestion The value is generated by the system by default.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

2-2119

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.5 the PRIORITY of E-UTRAN cells for the specified EARFCN


Full Name the PRIORITY of E-UTRAN cells for the specified EARFCN

Abbreviation arfcnLtePrio

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name E-UTRAN_PRIORITY

3GPP Reference 3GPP TS 44.018

Description This parameter indicates the priority of E-UTRAN cells.

Instance Cell

Value Range and Step 0..7

Unit N/A

Default Value 1

Default Value
Configuration Reason The default value is consistent with the value of EUtranDefaultPrio.

When the MS uses the reselection algorithm with high priority, the value
Configuration Rule and should be greater than that of ServCellPrio.
Adjustment Suggestion When the MS uses the reselection algorithm with low priority, the value
should be smaller than that of ServCellPrio.

Change Mode Offline

Related features N/A

Related Parameters PrioReselSupportServCellPrioEUtranDefaultPrio

When PrioReselSupport is supported, EUtranCellPrio must not be equal


Relationship
to ServCellPrio and the default value equals to that of EUtranDefaultPrio.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

2-2120

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.6 CCN support


Full Name CCN support

Abbreviation ccnSupport

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name CCN_ACTIVE

3GPP Reference 3GPP TS 44.018

Through the CCN_ACTIVE parameter carried in GPRS Cell Options IE


of BCCHSI13, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM neighbor cell.
When the CCN_ACTIVE parameter is not carried in the GPRS Cell
Options IE or it is disabled, the MS will not enter the CCN mode. When
the CCN_ACTIVE parameter of the local cell is enabled, and the cell is
bound to be reselected to other GSM neighbor cell, user should also
check whether the CCN_SUPPORTED parameter of the neghbor cell
exists. If it does not exist, the MS is supposed to enable the CCN
mode towards all neighbor cells. If it exists, set the CCN mode as
disabled, then the MS cannot enter the mode. If the CCN_SUPPORTED
parameter exists, set the CCN mode as enabled, then the MS can
enter the mode.
Through the PACKET MEASUREMENT ORDER message the
network side can indicate the MS whether to enable the CCN_ACTIVE
parameter in the serving cell. It, through the PACKET CELLl CHANGE
ORDER or PS HANDOVER COMMAND message to indicate the MS
whether to enable the CCN_ACTIVE parameter in the target cell. The
setting of the CCN_ACTIVE parameter of the message on the PACCH
channel takes priority over that of the CCN_ACTIVE parameter in the
broadcast system message. The MS only uses the CCN mode under
Description the NC0 and NC1 modes.

Instance Cell

Value Range and Step 0..1

Unit N/A

2-2121

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 0

Default Value
Configuration Reason the parameter is a feature switch, default value is No.

Normally proposed value is yes.If the serving cell's CCN active is


enabled, and the neighbour cell's CCN support is enabled, the CCN
Configuration Rule and
mode is used when reselect to the neighbour cell;If the neighbour cell's
Adjustment Suggestion
CCN support is not enabled, the CCN mode is not used when reselect to
the neighbour cell.

Change Mode Offline

Related features N/A

Related Parameters NACCSupport


CCNActive
SIStatusInd

NACC should be enabled simultaneously with CCNActive/SISta-


Relationship
tusInd/CCNSupport.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.55.7 The re-selecting forbid flag of LTE Ncell


Full Name The re-selecting forbid flag of LTE Ncell

Abbreviation ncelBlackListInd

Managed Object Adjacent E-UTRAN Cell Configuration

3GPP Name N/A

3GPP Reference 3GPP TS 44.018

This parameter indicates whether the MS can be reselected to the neigh-


Description bor cell.

Instance Cell

2-2122

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

0: No
Value Range and Step 1: Yes

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and It is required to configure this parameter


Adjustment Suggestion according to actual network configuration.

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN
Cell Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.56 User and Service Resource


Schedule(GUserAndSrvBasedSche)
2.56.1 User and Service Based Resource Schedule ID
Full Name User and Service Based Resource Schedule ID

Abbreviation GUserAndSrvBasedSche

Managed Object User and Service Resource Schedule

3GPP Name N/A

3GPP Reference N/A

Description User and Service Based Resource Schedule ID

2-2123

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.56.2 Support resource optimizing by service


Full Name Support resource optimizing by service

Abbreviation SuppResOpByService

Managed Object User and Service Resource Schedule

3GPP Name N/A

3GPP Reference N/A

This parameter indicates whether to support the resource optimization


Description function based on user service types.

Instance Cell

0: Not Support
Value Range and Step 1: Support

2-2124

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Unit N/A

Default Value 0

Default Value This parameter is a functional switch, which


Configuration Reason is disabled by default.

Configuration Rule and


Adjustment Suggestion Enable this switch as required.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.56.3 Threshold of PS resource congestion


Full Name Threshold of PS resource congestion

Abbreviation PSResourceThr1

Managed Object User and Service Resource Schedule

3GPP Name N/A

3GPP Reference N/A

After the resource adjustment function based on user service type is en-
abled, and the occupancy of PS resources in the current cell exceeds this
threshold, the maximum number of downlink channels allocated of each
Description service is limited.

Instance Cell

Value Range and Step 2..95

Unit N/A

2-2125

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Default Value 35

The maximum number of channels allocated is


Default Value
controlled based on service type when the PS resource usage reaches
Configuration Reason
a certain percentage.

When this parameter is configured to a large


value, the system restricts the maximum number of channels allocated
Configuration Rule and based on service type when the PS resource usage is relatively high.
Adjustment Suggestion When this parameter is configured to a small value, the system restricts
the maximum number of channels allocated based on service type when
the PS resource usage is relatively low.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2.56.4 Threshold of relieving PS resource congestion


Full Name Threshold of relieving PS resource congestion

Abbreviation PSResourceThr2

Managed Object User and Service Resource Schedule

3GPP Name N/A

3GPP Reference N/A

After the resource adjustment function based on user service type is en-
abled, and the occupancy of PS resources in the current cell is lower than
this threshold, the maximum number of downlink channels allocated of
Description each service is not limited.

2-2126

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Instance Cell

Value Range and Step 1..90

Unit N/A

Default Value 25

The maximum number of channels allocated is


Default Value not controlled based on service type when the PS resource usage
Configuration Reason reaches
a certain percentage.

When this parameter is configured to a large


value, the system does not restrict the maximum number of channels
Configuration Rule and allocated based on service type when the PS resource usage is relatively
Adjustment Suggestion high. When this parameter is configured to a small value, the system
does not restrict the maximum number of channels allocated based on
service type when the PS resource usage is relatively low.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters PSResourceThr0

The value of PSResourceThr1 should be smaller


Relationship
than the value of PSResourceThr0.

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule

Parameter Modifying
Version iBSCV6.20.710a

Parameter Modifying
Detail New

2-2127

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.57 User Priority and Service Type


Configuration(GPsUserAndSrvType)
2.57.1 User Priority and Service Type Configuration ID
Full Name User Priority and Service Type Configuration ID

Abbreviation GPsUserAndSrvType

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

Description User Priority and Service Type Configuration ID

Instance None

Value Range and Step 1..12

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2128

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.57.2 User Type


Full Name User Type

Abbreviation userType

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the following three types of users performing


Description services: gold medal, silver medal, and copper medal.

Instance Cell

0: gold user
1: silver user
Value Range and Step 2: bronze user

Unit N/A

Default Value 0

Default Value
Configuration Reason The value is fixed and needs no modification.

Configuration Rule and


Adjustment Suggestion The parameter value is fixed and needs to modification.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2129

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.57.3 Service Type


Full Name Service Type

Abbreviation ServType

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the following four types of services imple-


mented::self-owned services , browsed services, downloaded services,
Description and special services.

Instance Cell

0: own service
1: browse service
2: download service
Value Range and Step 3: IM service

Unit N/A

Default Value 0

Default Value
Configuration Reason The type is fixed and no modification is required.

Configuration Rule and


Adjustment Suggestion The parameter value is fixed and needs to modification.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2130

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.57.4 Schedule Priority


Full Name Schedule Priority

Abbreviation SchedulePriority

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the scheduling priority of different services. It


Description determins the scheduling duration of services.

Instance Cell

Value Range and Step 1..10

Unit N/A

Default Value 1

Default Value
Configuration Reason It is a recommended value for three user types and four service types.

Adjust this parameter only when specially required. A smaller value


Configuration Rule and indicates a longer duration for scheduling the services corresponding
Adjustment Suggestion to the user priority. A larger value indicates a shorter duration for
scheduling the services corresponding to the user priority.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2131

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.57.5 Downlink delay time


Full Name Downlink delay time

Abbreviation DlDelayTimeOfService

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the downlink delay time of different services.

Instance Cell

Value Range and Step 50..4000

Unit N/A

Default Value 2000

Default Value
Configuration Reason It is a recommended value for three user types and four service types.

Adjust this parameter only when specially required. A smaller value


indicates a longer duration for keeping the services corresponding to the
Configuration Rule and
user priority after downlink TBF data is transmitted completely. A larger
Adjustment Suggestion
value indicates a shorter duration for keeping the services corresponding
to the user priority after downlink TBF data is transmitted completely.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2132

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.57.6 TBF occupancy


Full Name TBF occupancy

Abbreviation TBFNum

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the TBF occupancy of different services.

Instance Cell

1: 0.5 TBF occupancy


2: 1 TBF occupancy
Value Range and Step 4: 2 TBF occupancy

Unit N/A

Default Value 2

Default Value
Configuration Reason It is a recommended value for three user types and four service types.

Adjust this parameter only when specially required. A smaller value


Configuration Rule and indicates that more service types are allowed for the user on the channel.
Adjustment Suggestion A larger value indicates that less service types are allowed for the user
on the channel.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version UR11.2 E

Parameter Modifying
Detail Update

2-2133

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.57.7 Max PDTCH num


Full Name Max PDTCH num

Abbreviation MaxPdtchNum

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the maximum allowable number of channels al-


Description located during the congestion of different services.

Instance Cell

Value Range and Step 1..5

Unit N/A

Default Value 4

Default Value Set it to the recommended configuration value for three user types and
Configuration Reason four service types.

Adjust this parameter only when specially required. A smaller value


indicates that less channels can be assigned when user services of
Configuration Rule and
the specified type are congested. A larger value indicates that more
Adjustment Suggestion
channels can be assigned when user services of the specified type are
congested.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2134

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

2.57.8 Preempt priority


Full Name Preempt priority

Abbreviation PreemptPriority

Managed Object User Priority and Service Type Configuration

3GPP Name N/A

3GPP Reference N/A

This parameter indicates the preemption accessed when different ser-


Description vices are congestioned.

Instance Cell

Value Range and Step 0..11

Unit N/A

Default Value 11

Default Value
Configuration Reason It is a recommended value for three user types and four service types.

Adjust this parameter only when specially required. A smaller value


Configuration Rule and indicates a lower preemption priority for the specified user service type.
Adjustment Suggestion A larger value indicates a higher preemption priority for the specified
user service type.

Change Mode Offline

Related features ZG0-01-02-007

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path Configuration->GPRS Configuration->User and Service Resource
Schedule->User Priority and Service Type Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2135

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.58 Cell Reserved Configuration(GCellRsv)


2.58.1 Cell Reserved Configuration ID
Full Name Cell Reserved Configuration ID

Abbreviation GCellRsv

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description Cell Reserved Configuration ID

Instance None

Value Range and Step N/A

Unit N/A

Default Value N/A

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.2 Cell Reserved Parameter 1


Full Name Cell Reserved Parameter 1

2-2136

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Abbreviation reserved1

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 1.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.3 Cell Reserved Parameter 2


Full Name Cell Reserved Parameter 2

Abbreviation reserved2

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

2-2137

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Description This parameter indicates the cell reserved parameter 2.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.4 Cell Reserved Parameter 3


Full Name Cell Reserved Parameter 3

Abbreviation reserved3

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 3.

Instance Cell

Value Range and Step 0..255

Unit N/A

2-2138

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.5 Cell Reserved Parameter 4


Full Name Cell Reserved Parameter 4

Abbreviation reserved4

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 4.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

2-2139

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.6 Cell Reserved Parameter 5


Full Name Cell Reserved Parameter 5

Abbreviation reserved5

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 5.

Instance Cell

Value Range and Step 0..255

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

2-2140

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.7 Cell Reserved Parameter 6


Full Name Cell Reserved Parameter 6

Abbreviation reserved6

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 6.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

2-2141

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.8 Cell Reserved Parameter 7


Full Name Cell Reserved Parameter 7

Abbreviation reserved7

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 7.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

2-2142

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.9 Cell Reserved Parameter 8


Full Name Cell Reserved Parameter 8

Abbreviation reserved8

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 8.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2-2143

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

2.58.10 Cell Reserved Parameter 9


Full Name Cell Reserved Parameter 9

Abbreviation reserved9

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 9.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.11 Cell Reserved Parameter 10


Full Name Cell Reserved Parameter 10

Abbreviation reserved10

Managed Object Cell Reserved Configuration

2-2144

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 10.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.12 Cell Reserved Parameter 11


Full Name Cell Reserved Parameter 11

Abbreviation reserved11

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 11.

Instance Cell

2-2145

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.13 Cell Reserved Parameter 12


Full Name Cell Reserved Parameter 12

Abbreviation reserved12

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 12.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

2-2146

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


Chapter 2 GSM Radio Parameters

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.14 Cell Reserved Parameter 13


Full Name Cell Reserved Parameter 13

Abbreviation reserved13

Managed Object Cell Reserved Configuration

3GPP Name N/A

3GPP Reference N/A

Description This parameter indicates the cell reserved parameter 13.

Instance Cell

Value Range and Step None

Unit N/A

Default Value 0

Default Value
Configuration Reason None

Configuration Rule and


Adjustment Suggestion None

2-2147

SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential


ZXUR 9000 GSM Radio Parameter Reference

Change Mode Offline

Related features N/A

Related Parameters N/A

Relationship N/A

Related Interfaces N/A

Impact on Equipment 0

Impact on service 0

Negotiation With CN No

GUI: Managed Element->GSM Logical Configuration->Cell Information


OMC Access Path
Configuration->Cell Reserved Configuration

Parameter Modifying
Version N/A

Parameter Modifying
Detail None

2.58.15 Cell Reserved Parameter 14

También podría gustarte