Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Tag N: Service
Erosive Corrosive With Solids Liquid Gas Liquid
Accuracy Class 1 ( 1%) Class 2 ( 2%) Class 3( > 2%)
Service Conditions
Process Data Units Maximum Normal
Flow Rate
Pressure
Temperature
Density
Molecular weight
SP. GR. at base conds.
Viscosity cP
Compressibility factor z
Specific heat ratio K
Pipe line Size INCHES SCH INSIDE DIA.
Meter run Size INCHES SCH INSIDE DIA.
Orifice plate Maximum flow rate
calculations Differencial range
Orifice diameter
ratio
Chart multiplier Reading x = flow rate
Bleed hole Yes No Vent
Plate thickness
ORIFICE PLATE ORIFICE FLANGES
1. Concentric Other: 7. Taps: Flange Pipe
2. ISO-5167 STD Other: 8. Size: 1/2 inch Other:
3. Bore: Exact Nearest 1/8 in 9. Type Weld-neck Slip-on
4. Material: 304 SS 316 SS Other: 10. Material: C.Steel Other:
5. Carrier ring: Yes No Matl. Type 11. Flanges: Yes No
6. MFR. & Model N 12. Flange rating:
Notes:
Planimeter equation if applicable
03/07/2017 MID-VOL.9-II - FORM-ISA - REV.0 - DATE AUG.94 - PAGE 20.21 PDVSA 20.21 (347417699.xls)
OF
REVISED DATE
Steam
Conditions
Minimum
Drain
FLANGES
Other:
Slip-on
Other:
03/07/2017 MID-VOL.9-II - FORM-ISA - REV.0 - DATE AUG.94 - PAGE 20.21 PDVSA 20.21 (347417699.xls)