Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Shutdown SIS
3. Remove the magnets from the housing.
Previous Screen
4. Remove the screen from the housing.
Product: BACKHOE LOADER
Model: 416C BACKHOE LOADER 4ZN 5. Wash the tube and the screen in a clean, nonflammable solvent.
Configuration: 416C Backhoe Loader Center Pivot, Single Tilt 4ZN00001-16043 (MACHINE) POWERED BY 3054 Engine
Transmission Magnetic Screen - Clean 6. Clean the magnets with a cloth, with a stiff bristle brush, or with pressure air.
SMCS - 3030-070-MGS 7. Install the magnets and the tube assembly into the magnetic screen.
1. Drain the transmission oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change". 8. Install the magnetic screen.
9. Clean the cover and inspect the seal. Replace the seal, if the seal is damaged.
11. Fill the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".
Copyright 1993 - 2017 Caterpillar Inc. Fri Feb 17 17:22:19 UTC-0300 2017
All Rights Reserved.
Private Network For SIS Licensees.
Illustration 1 g00293338
Illustration 2 g00293340