Scribd Logo
Cargar

¡Te damos la bienvenida a Scribd!

  • X-FCM - PUB - 5133460 - 000. Hilty

    Cargado por

    Jhon Sanfra
    15 vistas1 página
    This document provides installation torque specifications for different fastener types and sizes used with X-FCM components. It lists the applicable torque range in Nm for various SF and SFC fasteners between sizes 121-A and 22, and also provides the part numbers for 15mm diameter EM8H socket head cap screws for use with components X-EM8H-15-12 P8 and X-EM8H-15-12 FP10. Tightening should be performed using a torque wrench and ensuring the correct torque value is applied based on the specific fastener size.

    Descripción original:

    X-FCM_PUB_5133460_000. Hilty D.sheet

    Título original

    X-FCM_PUB_5133460_000. Hilty

    Derechos de autor

    © © All Rights Reserved

    Formatos disponibles

    PDF, TXT o lea en línea desde Scribd

    ¿Le pareció útil este documento?

    ¿Este contenido es inapropiado?

    Denunciar este documento
    This document provides installation torque specifications for different fastener types and sizes used with X-FCM components. It lists the applicable torque range in Nm for various SF and SFC fasteners between sizes 121-A and 22, and also provides the part numbers for 15mm diameter EM8H socket head cap screws for use with components X-EM8H-15-12 P8 and X-EM8H-15-12 FP10. Tightening should be performed using a torque wrench and ensuring the correct torque value is applied based on the specific fastener size.

    Copyright:

    © All Rights Reserved
    Descargue como PDF, TXT o lea en línea desde Scribd
    Marcar por contenido inapropiado
    15 vistas1 página

    X-FCM - PUB - 5133460 - 000. Hilty

    Cargado por

    Jhon Sanfra
    This document provides installation torque specifications for different fastener types and sizes used with X-FCM components. It lists the applicable torque range in Nm for various SF and SFC fasteners between sizes 121-A and 22, and also provides the part numbers for 15mm diameter EM8H socket head cap screws for use with components X-EM8H-15-12 P8 and X-EM8H-15-12 FP10. Tightening should be performed using a torque wrench and ensuring the correct torque value is applied based on the specific fastener size.

    Copyright:

    © All Rights Reserved
    Descargue como PDF, TXT o lea en línea desde Scribd
    Marcar por contenido inapropiado
    de 1

    X-FCM

    1 4

    2050226 A1-02.2013
    Tinst
    5-8Nm
    SF 121-A 6-10
    SF 150-A 5-8
    SF 14 5-8
    SFC 14-A 6-10
    SF 18-A 5-8
    SFC 18-A 5-8
    SF 22 5-8

    2 5a
    X-EM8H-15-12 P8
    X-EM8H-15-12 FP10

    3 5b

    Printed: 07.07.2013 | Doc-Nr: PUB / 5133460 / 000 / 00

    También podría gustarte