Está en la página 1de 2

05430

DIAGNOSTICS AIR CONDITIONING SYSTEM


0540O01

DIAGNOSTIC TROUBLE CODE CHART


If malfunction code is displayed during the DTC check (sensor check), check the circuit listed for that code
in the table below (Proceed to the page given for that circuit).
DTC No.
Detection Item Trouble Area Memory*4
(See Page)

00 Normal
Room temperature sensor circuit S Cooler (room temp. sensor) thermistor
B1411/11*1 S Harness or connector between cooler (room temp. sensor) f
(05438) thermistor and A/C amplifier assy (8.5 min. or more)
S A/C amplifier assy

Ambient temperature sensor circuit S Cooler (ambient temp. sensor) thermistor


S Harness or connector between cooler (ambient temp. sensor
B1412/12*2 ) thermistor and ECM f
(05441) S ECM (8.5 min. or more)
S Multiplex communication circuit
S A/C amplifier assy
Evaporator temperature sensor circuit S Cooler thermistor No. 1
B1413/13 S Harness or connector between cooler thermistor No. 1 and f
(05444) A/C amplifier assy (8.5 min. or more)
S A/C amplifier assy

Exhaust gas sensor circuit S Cooler (sensor thermistor smog ventilation)


B1418/18
S Harness or connector
(05447)
S A/C amplifier assy
Solar sensor circuit (short) S Automatic light control sensor f
B1421/21*3 S Harness or connector between automatic light control sen- (8.5 min. or more)
(05450) sor and A/C amplifier assy
Solar sensor circuit (open) S A/C amplifier assy

All conditions below are detected for 3 S Cooler compressor assy


sec. or more S Cooler compressor assy drive belt
(a) Engine speed: 450 rpm or more S Cooler compressor and magnetic clutch lock sensor
B1422/22*5 (b) Ratio between engine and compres- S Harness and connector between ECM and cooler compres-

(05453) sor rpm deviates 20 % or more in com- sor assy, cooler compressor assy and body ground
parison to normal operation. S Multiplex communication circuit
S ECM
S A/C amplifier assy
Pressure switch circuit S Pressure No. 1 switch
S Harness or connector between pressure No. 1 switch and
ECM, Pressure No. 1 switch and body ground
B1423/23 f
S Multiplex communication circuit
(05455) (8.5 min. or more)
S Refrigerant pipe line
S ECM
S A/C amplifier assy

Solar sensor circuit (short) S Automatic light control sensor f


B1424/24*3 S Harness or connector between automatic light control sen- (8.5 min. or more)
(05458) sor and A/C Amplifier assy
Solar sensor circuit (open) S A/C amplifier assy

Air mix damper position sensor circuit S Damper position sensor


B1431/31 (Passenger side) S Harness or connector between damper servo subassy and
(05461) A/C amplifier assy f
S A/C amplifier assy (1 min. or more)

Air inlet damper position sensor circuit S Damper position sensor


B1432/32 S Harness or connector between damper servo subassy and f
(05465) A/C amplifier assy (1 min. or more)
S A/C amplifier assy

LEXUS SC430 REPAIR MANUAL (RM858E)


05431
DIAGNOSTICS AIR CONDITIONING SYSTEM

Air outlet damper position sensor circuit S Damper position sensor


B1433/33 S Harness or connector between damper servo subassy and f
(05469) A/C amplifier assy (1 min. or more)
S A/C amplifier assy

Air mix damper position sensor circuit S Damper position sensor


B1436/36 (Driver side) S Harness or connector between damper servo subassy and f
(05473) A/C amplifier assy (1 min. or more)
S A/C amplifier assy

Air mix control servo motor circuit S Damper servo subassy


(Passenger side) S Damper position sensor
B1441/41 f
S Harness or connector between damper servo subassy and
(05477) (15 sec.)
A/C amplifier assy
S A/C amplifier assy
Air inlet damper control servo motor cir- S Damper servo subassy
cuit S Damper position sensor
B1442/42 f
S Harness or connector between damper servo subassy and
(05481) (15 sec.)
A/C amplifier assy
S A/C amplifier assy
Air outlet control servo motor circuit S Damper servo subassy
S Damper position sensor
B1443/43 f
S Harness or connector between damper servo subassy and
(05485) (15 sec.)
A/C amplifier assy
S A/C amplifier assy
Air mix damper control servo motor cir- S Damper servo subassy
cuit (Driver side) S Damper position sensor
B1446/46 f
S Harness or connector between damper servo subassy and
(05489) (15 sec.)
A/C amplifier assy
S A/C amplifier assy
B1499/99 Multiplex communication circuit S Open in multiplex communication circuit

(05493)

HINT:
S *1: If the room temp. is approx. 18.6C (3.7F) or lower, trouble code B1411/11 may be output even
though the system is normal.
S *2: If the ambient temp. is approx. 52.9C (61.4F) or lower, a malfunction code may be output even

though the system is normal.


S *3: If the check is being performed in a dark place, DTC B1421/21 or B1424/24 (solar sensor circuit

abnormal) could be displayed.


S *4: The A/C amplifier memorizes the DTC of the respective malfunction it has occurred for the period

of the time indicated in the brackets.


S *5: Compressor lock (DTC B1422/22) is indicated only for a current malfunction. (See page 05453)

To confirm DTC B1422/22, preform the following steps.


(1) With the engine ON, enter the DTC check mode.
(2) Press the R/F switch to enter actuator check mode, and set the operation to Step No. 3.
(3) Press the AUTO switch to return to DTC check mode.
(4) The DTC is displayed after approx. 3 secs.

LEXUS SC430 REPAIR MANUAL (RM858E)

También podría gustarte