Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Formulae: cell D5, although displaying 5,000 could actually contain the formula
=D3 D4
Formulae give spreadsheets their great power because calculations can be automatically
updated. Therefore, in the example above if the contents of cell D3 were changed to 21,000
then cell D5 would automatically display 6,000
Formulae can be complex and can contain ready-made functions such functions to average
the contents of cells or to add up a column or row.
Formulae always start with =. This tells the program that what follows is a formula and not
a word beginning D3., in cell D5 above.
For example:
Budgeting: budgets are always subject to estimates and changes. Because formulae
automatically update calculations, new budgets can quickly be produced.
What-if queries: for example, what-if sales decrease by 5%. Again these experiments
can be carried out very quickly.
Variance analysis: comparison of actual and budgeted results and teh highlighting of
variances.
Production of graphics: all spreadsheets allow fast production of graphs and charts.
They are not suitable for large amounts of data, such as all the information held on
customers. There, a database package would be more suitable.
1) Estimates
2) Definite data
For example:
The sales revenues and gross profits are calculated data. Here the formulae underlying the
numbers displayed are shown in small type in each cell, but the formulae would not be
displayed like this on a real spreadhseet.
Never enter the same figure more than once. So here, the GP% is recorded once only.
That means it will be consistently used and will be easy to change.
Do not type in any figure that could be calculated from others on the spreadsheet.
Information is usually entered by clicking on the cell then typing in the data.
However, spreadsheets allow information to be copied from one cell to others. So 1,000 can
be entered into B7 then copied across to the other months.
Particularly useful is that when formulae are copied, their references are automatically
updated. Therefore if =B6 B7 is entered in B8 and copied to C8 and D8, the formulae will
automatically become =C6 C7 and =D6 D7.
Information in cells can be easily changed by clicking on the cell and re-entering or
amending its contents.
Whole ranges of cells can be specified for data entry, copying or formatting by their top left
and bottom right corners. So copying a cell content to the range G3:J9 would copy into the 28
cells specified by those coordinates: G3, H3, I3, J3, all the way down to G9, H9, I9, J9.
Formatting tools
Correct formatting can greatly improve the usability of a spreadsheet and, indirectly its
accuracy because errors should be easier to spot.
Spreadsheet Formulae
The following formulae are shown in the spreadsheet extracts shown below
Here is the spreadsheet again, Showing the formulae behind the amounts displayed.
Spreadsheet Errors
Most spreadsheets have error reporting facilities. The more sophisticated tools allow
formulae to be traced from cell to cell. However, even as data is entered into spread sheet
cells some errors will be reported.
In the extract below from an Excel spreadsheet, the small triangles at the top left of B2, B4
and so on indicate that there could be a problem. The second spreadsheet shows the formulae
that lie behind the problem cells.
Cell B2 Contains a calculation using cells that have no values yet; C2 and D2 are empty
Cell B8 Contents too large to be shown in the cell. This is easily fixed by making the column
wider.
=C12 + D12
Then the answer to cell C12 depends on the contents of cell C12 and the spreadsheet would
warn you about that, or not permit that formula to be entered.
1. Simple copying. In the spreadsheet highlight the range of cells you are interested in.
Press Ctrl C to copy these. Then in the word processor document, press Ctrl V. This
pastes a copy of the figures into the report, but there is no spreadsheet functionality
there: they are just like typed figures. This can be inefficient if the spreadsheet figures
change later and you have to make sure the report is brought up to date accurately.
2. Embedding. As before, copy from the spreadsheet, but select Paste Special in the
word processor. This copies the selected range into the report but maintains the
functionality of the spreadsheet. Its like having a mini-spreadsheet within the report.
However, there are two copies of the cells one in the spreadsheet and one in the
word processor file. These are now quite separate and changes in one will not affect
the other.
3. Linking. As above but in Paste Special choose the link option. This keeps the two
copies of the spreadsheet cells linked so that updating the spreadsheet can be
automatically reflected in the word processor
Save as allows you to select a different name for the spread sheet. This can be useful if you
want to keep several editions of the spreadsheet.
Retrieving is a simple matter of navigating to the folder where the spreadsheet was stored and
clicking, or double-clicking, on it.