Documentos de Académico
Documentos de Profesional
Documentos de Cultura
DECLARATION .................................................................................................................................................................. 2
ABSTRACT OF THE REPORT ................................................................................................................................................ 3
EXECUTIVE SUMMARY: ..................................................................................................................................................... 4
A.
B.
C.
BUILDING CONFIGURATION:................................................................................................................................................... 4
SERVICEABILITY: ................................................................................................................................................................... 4
STRUCTURAL MEMBER: ....................................................................................................................................................... 4
I.
II.
III.
IV.
V.
VI.
VII.
Page 1 of 46
Declaration
We declare that this assessment has been done based on collected data and test results by field
investigation, following mainly ACI Code, BNBC 2006 and ACCORD Guideline. The objective is to
support the ACCORD program.
All rights reserved. This report and all other documents related to this project are confidential and may
contain information that is privileged or otherwise protected from disclosure and are only for the
intended recipient.
Page 2 of 46
On 14 December 2013, Arup carried out a visual structural survey of this project. They
have major concern about the following conditions in this factory.
Design check all columns, beams and slabs. Create loading plans and heights to match
We carried out a Detailed Engineering Assessment of this structure especially considering the
conditions described above and step by step carried out the remediation criteria.
A detailed calculation and analysis has been described in the rest of the report.
Page 3 of 46
Executive Summary:
Our company was engaged to perform a detailed structural engineering assessment of Proposed 09 (nine)
storied factory building for a factory building located at Konabari, Nilnagar, Gazipur, Bangladesh. The main
purpose of this analysis is to determine, whether the factory building, in its current condition, has sufficient
capacity to support the anticipated vertical and lateral loads as per Bangladesh National Building Code (BNBC)
- 2 0 0 6. According to NTPA reduced load combination and live load 42 psf, this assessment has been summarized
in this report.
Few observations based on DEA report are stated as follows:
A.
Building Configuration:
Torsional Irregularity: This is a torsional regular building.
B.
Serviceability:
Drift limit is within allowable limit for code prescribed lateral load in both direction which can be verified in
the serviceability check section.
C.
Structural Member:
This building is essentially composed of RC frame structure, beam, column, shear wall moment frame
system.
I.
Columns: PMM ratio of 98.5% of the columns is within the limit (compliant) based on structural analysis
considering 2KPa (42psf) live load along with code prescribe lateral load.
II.
Beam: Almost all the beams found adequate in size and reinforcement for both flexure and shear can be
verified from the visuals of ETABS for beam design. Check the model file before retrofitting.
III.
Slab: Existing slab thickness and reinforcement of typical slab floor is adequate enough to resist code
prescribed vertical load all these are represented through the well processed SAFE analysis based on
ETABS analysis value.
IV.
Foundations: Building is supported by isolated footing foundation system. Thus a FEM analysis has been
performed to determine the design load; and then checked with available bearing area in order to determine
safe bearing capacity; plus punching is also checked against governed load in order to determine section
adequacy of footing against punching. Reinforcement provide for foundation is safe against its developed
load. Provided footing area is adequate as per soil test report.
Page 4 of 46
Page 5 of 46
The RCC structure has been observed visually to identify the physical distresses or any other
findings. Summary of the findings has been tabulated below.
Physical Observation
Table 2-1:
Physical
Observation SL
01
02
Observations
Remedial Plan
03
04
Page 6 of 46
The following Table 1.1 shows the basic information of the building.
Table 1.1: Basic information of the building
Information
Description
Structural
System
Floor Area
Number of
Stories
09 Storied building
Construction Year
Started in 2006
Foundation Type
Isolated footing
Construction
materials
Stone chips has been used for concrete in footing, columns up to 6th floor,
brick chips for columns in 7th,8th and roof. Brick chips has been used for
concrete in beam and slab.
As built architectural & structural drawings are available.
Architectural &
structural drawing
Floor usage
fy
60,000
psi
fc
4297 psi
fc
3469 psi
fc
2873 psi
fc
2873 psi
Page 7 of 46
Ec
57000fc
Table 2.2: Concrete cylindrical result for column, beam & slab by using equation ACI 562.
Page 8 of 46
Ground Floor
Basement
Mezzanine floor
Live Load
Live Load
1st Floor
Live Load
2nd Floor
Live Load
3rd Floor
Live Load
4th Floor
Live Load
5th Floor
Live Load
6th floor
Live Load
7th floor
Live Load
8th floor
Live Load
Roof
Live Load
1.5
Live Load
14.94
Page 9 of 46
Live Load
210 kmph
Exposure category
This calculation presents the automatically generated lateral wind loads for load pattern WL X according
to UBC 94, as calculated by ETABS.
Exposure Parameters
Exposure From = Diaphragms
Exposure Type = Exposure B
Wind Direction = 0;90 degrees
Basic Wind Speed, V
Windward Coefficient, Cq,wind [UBC Table 16-H]
Leeward Coefficient, Cq,lee [UBC Table 16-H]
V = 130.5 mph
Cq,wind = 0.8
Cq,lee = 0.5
IW = 1
Lateral Loading
Wind Stagnation Pressure, qs [UBC
qs = 43.59744
qs = 0.00256V 2 10psf
Table 16-F]
Design Wind Pressure, P [UBC Eq. 18P = (Ce,wind Cq,wind + Ce,lee Cq,lee )qs Iw
1]
Page 10 of 46
Story6
Eleva
tion
ft
135.2
5
126.7
5
120.7
5
111.2
5
101.2
5
91.08
33
81
Story5
71
Story4
61
Story3
50.66
67
39.83
34
27.66
67
8.5
0
MRT
MRB
OHWTB
Roof
Story8
Story7
Story2
Story1
G.F
Base
X-Dir
Y-Dir
kip
9.884
kip
0
47.28
1
49.52
9
68.28
2
68.87
7
68.15
7
65.41
9
64.16
3
63.02
9
64.17
5
65.24
5
81.74
1
43.71
0
0
0
0
0
0
0
0
0
0
0
0
0
0
This calculation presents the automatically generated lateral wind loads for load pattern WL Y according
to UBC 94, as calculated by ETABS.
Exposure Parameters
Exposure From = Diaphragms
Exposure Type = Exposure B
Wind Direction = 90;180 degrees
Basic Wind Speed, V
Windward Coefficient, Cq,wind [UBC Table 16-H]
Leeward Coefficient, Cq,lee [UBC Table 16-H]
V = 130.5 mph
Cq,wind = 0.8
Cq,lee = 0.5
Page 11 of 46
IW = 1
Lateral Loading
Wind Stagnation Pressure, qs [UBC
qs = 43.59744
qs = 0.00256V 2 10psf
Table 16-F]
Design Wind Pressure, P [UBC Eq. 18P = (Ce,wind Cq,wind + Ce,lee Cq,lee )qs Iw
1]
Elevatio
n
ft
135.25
126.75
X-Dir
Y-Dir
kip
0
0
OHW
TB
Roof
120.75
111.25
Story8
101.25
Story7
91.0833
Story6
81
Story5
71
Story4
61
Story3
50.6667
Story2
39.8334
Story1
27.6667
G.F
8.5
Base
kip
6.703
72.12
8
75.55
8
95.13
6
95.96
5
94.96
3
91.14
7
89.39
7
87.81
8
89.41
4
90.90
5
113.8
89
66.92
2
0
MRT
MRB
are of rectangular (or quadrilateral) and triangular shape. The quadrilateral element has four nodes at its four
corners. Each node has six degrees of freedom three translations and three rotations in a 3D space
configuration. The frame elements are used to model the columns while the plate/shell elements are used to
model the ribs and the roof shell etc. At base level, the columns are assumed to be held fixed.
Load Case 1:
Load Case 2:
Load Case 3:
Load Case 4:
Load Case 5:
Load Case 6:
Type
Self Weight
Multiplier
Dead
Dead
Live
Live
FF
Superimposed Dead
PW-Full
Superimposed Dead
PW-8"BW
Superimposed Dead
Parapet
Superimposed Dead
RLL
Roof Live
WL X
Wind
UBC 94
WL Y
Wind
UBC 94
Auto Load
Where D stands for total dead load i.e. D = (FF+SW+BW+SW), L stands for live load i.e. L=LL, W (Wx, Wy)
stands for wind load. When these basic load cases are combined accordingly considering the direction of
lateral loads, we obtain, after simplification.
The above combinations are factored combinations, i.e. factors like 1.2 or 1.6 are used to multiply the basic
load cases before they are added. These combinations are useful for the purpose of reinforcement design
checking using USD method. In the above combinations Wx mean wind force acting in from north towards
south direction while Wx means the same force acting in the opposite direction i. e from south towards north
direction. Similar explanation applies for other lateral loads. The above load combination is considered for
the assessment of factory Building.
Page 13 of 46
Drift evaluation
Torsional irregularity check
Foundation evaluation (SAFE analysis)
Column & Shear wall evaluation
Floor beam evaluation
Floor slab evaluation
Page 14 of 46
Height
Load Case/Combo
Maximum
Drift
Allowable
Drift
in
in
1.471169
3.24
Compliant
1.379411
3.04
Compliant
0.340751
2.89
Compliant
1.545464
2.67
Compliant
1.418241
2.43
Compliant
Direction
ft
Accord - 3 ( 1.05 DL + 1.25 LL +
1.0 WX)
Accord - 5 ( 1.05 DL + 1.25 LL 1.0 WY)
Accord - 3 ( 1.05 DL + 1.25 LL +
1.0 WX)
Accord - 5 ( 1.05 DL + 1.25 LL 1.0 WY)
Remarks
MRT
135.25
MRB
126.75
OHWTB
120.75
Roof
111.25
Story8
101.25
Story7
91.0833
1.274757
2.18
Compliant
Story6
81
1.118626
1.944
Compliant
Story5
71
0.951794
1.704
Compliant
Story4
61
0.773642
1.464
Compliant
Story3
50.6667
0.58053
1.216
Compliant
Story2
39.8334
0.377887
0.95
Compliant
Story1
27.667
0.189513
0.66
Compliant
G.F
8.5
0.038125
0.204
Compliant
Page 15 of 46
Height
Load Case/Combo
Direction
ft
Maximum
Drift
Allowable
Drift
in
in
Remarks
MRT
135.25
1.41
3.24
Compliant
MRB
126.75
1.35
3.04
Compliant
OHWT
B
120.75
2.11
2.89
Compliant
Roof
111.25
2.01
2.67
Compliant
Story8
101.25
1.88
2.43
Compliant
Story7
91.08
1.72
2.18
Compliant
Story6
81
1.53
1.944
Compliant
Story5
71
1.32
1.704
Compliant
Story4
61
1.084232
1.464
Compliant
Story3
50.6667
0.813415
1.21
Compliant
Story2
39.8334
0.95
Compliant
0.66
Compliant
0.204
Compliant
Story1
G.F
27.667
8.5
Y
0.519997
Y
0.256146
Y
0.071364
Page 16 of 46
II.
E-S
Corner
x - max
2.08
S-W
Corner
y- max
0.25
1.84
2.08
1.6
1.84
0.245
3.16
3.15
3.155
Remarks
Torsional
Regular
Remarks
Torsional
Regular
Page 17 of 46
III.
Foundation Evaluation
Note: Soil bearing capacity is considered 4.84 KSF (F.S=2.75) as per soil test report, considering bore hole 1 and 3, (lowest value have been considered)
Column ID
Arch.Grid
&
Sizes
Footing ID
&
Footing Size,
BxLxt
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
ft x ft x in
Kip
Psi
Psi
2/A
C1 (12 x
17)
F1
6.5 x 5.5 x 26
277.5
80.43
131.10
OK
11/A
C2 (14 x
17)
F2
8.5 x 6.5 x 26
256
72.28
131.10
11/B
C3 (14 x
17)
F2
8.5 x 6.5 x 26
305
86.11
11/C
C4 (14 x
17)
F2
8.5 x 6.5 x 26
281.5
11/D
C5 (14 x
17)
F2
8.5 x 6.5 x 26
11/E
C6 (14 x
17)
11/G
4/A
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
Not Reqd.
7.76
13.31
1.56
OK
OK
Not Reqd.
4.63
13.31
2.61
OK
131.10
OK
Not Reqd.
5.52
13.31
2.19
OK
79.47
131.10
OK
Not Reqd.
5.1
13.31
2.37
OK
283
79.90
131.10
OK
Not Reqd.
5.12
13.31
2.36
OK
F2
8.5 x 6.5 x 26
307
86.67
131.10
OK
Not Reqd.
5.56
13.31
2.18
OK
C7 (14 x
17)
F2
8.5 x 6.5 x 26
274
77.36
131.10
OK
Not Reqd.
4.96
13.31
2.44
OK
C8 (17 x
24)
F3
13 x 6.5 x 28
577
126.81
131.10
OK
28 inches
6.83
13.31
1.77
OK
Page 17 of 46
Column ID
&
Sizes
Footing ID
&
Footing Size,
BxLxt
B
C9 (17 x
24)
ft x ft x in
F3
13 x 6.5 x 28
6/A
C10 (17 x
24)
7/A
Arch.Grid
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
Kip
Psi
Psi
487.5
107.14
131.10
OK
F3
13 x 6.5 x 28
485
106.59
131.10
C11 (17 x
24)
F3
13 x 6.5 x 28
482
105.93
8/A
C12 (17 x
24)
F3
13 x 6.5 x 28
461
9/A
C13 (17 x
24)
F3
13 x 6.5 x 28
10/A
C14 (17 x
24)
4/G
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
25 inches
5.77
13.31
2.1
OK
OK
25 inches
5.74
13.31
2.11
OK
131.10
OK
25 inches
5.7
13.31
2.12
OK
101.32
131.10
OK
25 inches
5.46
13.31
2.22
OK
429.5
94.40
131.10
OK
Not Reqd.
5.08
13.31
2.38
OK
F3
13 x 6.5 x 28
456
100.22
131.10
OK
Not Reqd.
5.4
13.31
2.24
OK
C15 (17 x
24)
F3
13 x 6.5 x 28
187.5
41.21
131.10
OK
Not Reqd.
2.22
13.31
5.45
OK
5/G
C16 (17 x
24)
F3
13 x 6.5 x 28
563
123.74
131.10
OK
28 inches
6.66
13.31
1.82
OK
6/G
C17 (17 x
24)
F3
13 x 6.5 x 28
579
127.25
131.10
OK
28 inches
6.85
13.31
1.77
OK
5/A
Page 18 of 46
Column ID
&
Sizes
Footing ID
&
Footing Size,
BxLxt
B
C18 (17 x
24)
ft x ft x in
F3
13 x 6.5 x 28
8/G
C19 (17 x
24)
9/G
Arch.Grid
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
Kip
Psi
Psi
588
129.23
131.10
OK
F3
13 x 6.5 x 28
568
124.84
131.10
C20 (17 x
24)
F3
13 x 6.5 x 28
549.5
120.77
10/G
C21 (17x
24)
F3
13 x 6.5 x 28
528
4/B
C22 (22 x
30)
F5
14 x 10 x 38
4/C
C23 (22 x
30)
4/D
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
28 inches
6.96
13.31
1.74
OK
OK
28 inches
6.72
13.31
1.8
OK
131.10
OK
27 inches
6.5
13.31
1.86
OK
116.04
131.10
OK
27 inches
6.25
13.31
1.94
OK
888
103.98
131.10
OK
Not Reqd.
6.34
13.31
1.91
OK
F5
14 x 10 x 38
660
77.28
131.10
OK
Not Reqd.
4.71
13.31
2.57
OK
C24 (22 x
30)
F5
14 x 10 x 38
636
74.47
131.10
OK
Not Reqd.
4.54
13.31
2.67
OK
4/E
C25 (22 x
30)
F5
14 x 10 x 38
658.5
77.11
131.10
OK
Not Reqd.
4.7
13.31
2.57
OK
5/B
C26 (27 x
30)
F4
13.5 x 12 x 38
740
83.24
131.10
OK
Not Reqd.
4.57
13.31
2.65
OK
5/C
C27 (27 x
30)
F4
13.5 x 12 x 38
703
79.08
131.10
OK
Not Reqd.
4.34
13.31
2.79
OK
7/G
Page 19 of 46
Column ID
&
Sizes
Footing ID
&
Footing Size,
BxLxt
B
C28 (27 x
30)
ft x ft x in
F4
13.5 x 12 x 38
5/E
C29 (27 x
30)
6/B
Arch.Grid
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
Kip
Psi
Psi
675
75.93
131.10
OK
F4
13.5 x 12 x 38
714.5
80.37
131.10
C30 (27 x
30)
F4
13.5 x 12 x 38
739.5
83.18
6/C
C31 (27 x
30)
F4
13.5 x 12 x 38
700.5
6/D
C32 (27 x
30)
F4
13.5 x 12 x 38
6/E
C33 (27 x
30)
7/B
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
Not Reqd.
4.17
13.31
2.9
OK
OK
Not Reqd.
4.41
13.31
2.74
OK
131.10
OK
Not Reqd.
4.56
13.31
2.65
OK
78.80
131.10
OK
Not Reqd.
4.32
13.31
2.8
OK
663.5
74.63
131.10
OK
Not Reqd.
4.1
13.31
2.95
OK
F4
13.5 x 12 x 38
695.5
78.23
131.10
OK
Not Reqd.
4.29
13.31
2.82
OK
C34 (27 x
30)
F4
13.5 x 12 x 38
738.5
83.07
131.10
OK
Not Reqd.
4.56
13.31
2.65
OK
7/C
C35 (27 x
30)
F4
13.5 x 12 x 38
702
78.97
131.10
OK
Not Reqd.
4.33
13.31
2.79
OK
7/D
C36 (27 x
30)
F4
13.5 x 12 x 38
664.5
74.75
131.10
OK
Not Reqd.
4.1
13.31
2.95
OK
7/E
C37 (27 x
30)
F4
13.5 x 12 x 38
693.5
78.01
131.10
OK
Not Reqd.
4.28
13.31
2.83
OK
5/D
Page 20 of 46
Column ID
&
Sizes
Footing ID
&
Footing Size,
BxLxt
B
C38 (27 x
30)
ft x ft x in
F4
13.5 x 12 x 38
8/C
C39 (27 x
30)
8/D
Arch.Grid
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
Kip
Psi
Psi
704.5
79.25
131.10
OK
F4
13.5 x 12 x 38
670.5
75.42
131.10
C40 (27 x
30)
F4
13.5 x 12 x 38
633.5
71.26
8/E
C41 (27 x
30)
F4
13.5 x 12 x 38
660
2/C
C42 (D18 =
16 x 16)
F6
8.5 x 6.5 x 26
2/D
C43 (D18 =
16 x 16)
2/E
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
Not Reqd.
4.35
13.31
2.78
OK
OK
Not Reqd.
4.14
13.31
2.92
OK
131.10
OK
Not Reqd.
3.91
13.31
3.09
OK
74.24
131.10
OK
Not Reqd.
4.07
13.31
2.97
OK
304
84.73
131.10
OK
Not Reqd.
5.5
13.31
2.2
OK
F6
8.5 x 6.5 x 26
298
83.05
131.10
OK
Not Reqd.
5.39
13.31
2.24
OK
C44 (D18 =
16 x 16)
F6
8.5 x 6.5 x 26
300.5
83.75
131.10
OK
Not Reqd.
5.44
13.31
2.22
OK
9/B
C45 (26 x
28)
F4
13.5 x 12 x 38
645.5
74.37
131.10
OK
Not Reqd.
3.98
13.31
3.04
OK
9/C
C46 (26 x
28)
F4
13.5 x 12 x 38
610.5
70.33
131.10
OK
Not Reqd.
3.77
13.31
3.21
OK
9/D
C47 (26 x
28)
F4
13.5 x 12 x 38
591
68.09
131.10
OK
Not Reqd.
3.65
13.31
3.32
OK
8/B
Page 21 of 46
Column ID
&
Sizes
Footing ID
&
Footing Size,
BxLxt
B
C48 (26 x
28)
ft x ft x in
F4
13.5 x 12 x 38
10/B
C49 (27 x
28)
10/C
Arch.Grid
2. Punching Check
Service Punching
Load, P
Shear
[From,
Stress,
ETABS]
Vp
Nominal
Shear
Resistance,
Vc
Comments
Kip
Psi
Psi
625
72.00
131.10
OK
F5
14 x 10 x 38
811.5
92.74
131.10
C50 (27 x
28)
F5
14 x 10 x 38
675
77.14
10/D
C51 (27 x
28)
F5
14 x 10 x 38
669
10/E
C52 (27 x
28)
F5
14 x 10 x 38
2/B
C53 (14 x
22)
F2
8.5 x 6.5 x 26
9/E
3. Bearing Check
Ultimate
Required Developed
Soil
Thickness,
Stress,
Bearing
if any
qds
Capacity,
qult
FoS
Remarks
KSF
KSF
Not Reqd.
3.86
13.31
3.13
OK
OK
Not Reqd.
5.8
13.31
2.09
OK
131.10
OK
Not Reqd.
4.82
13.31
2.51
OK
76.46
131.10
OK
Not Reqd.
4.78
13.31
2.53
OK
823.5
94.11
131.10
OK
Not Reqd.
5.88
13.31
2.06
OK
333.5
88.41
131.10
OK
Not Reqd.
6.04
13.31
OK
Page 22 of 46
IV.
Column Evaluation
Story ID
Col.
Labe
l
Section
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
-9.62
-12.3
-10
0.082
OK
15.23
38.22
-84.7
0.169
OK
8.83
-6.95
-26.1
0.243
OK
-18.4
-7.42
26.79
0.178
OK
28.82
41.04
-71
0.154
OK
24.76
-15
7.033
0.128
OK
10.53
20.59
73.57
0.124
OK
-1.04
-3.54
5.55
-1.3
-3.5
22.9
-7.51
14.71
-9.71
0.095
0.095
0.1
OK
OK
OK
-10.5
-17.1
5.007
0.081
OK
-2.99
-14.3
-5.63
0.064
OK
20.63
-58.2
56.54
0.14
OK
30.67
-46.2
-52.7
0.117
OK
3.41
-4.46
-5.39
4.19
-6.05
6.569
-6.14
6.911
-2.4
0.356
-0.43
-2.01
0.068
0.062
0.062
0.071
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
2.36E
-04
OK
OK
OK
OK
MRT
C15
C3-(15x22)
MRT
C25
C5-(28x20)
MRT
C44
C6-(D18)
MRB
C15
C3-(15x22)
MRB
C25
C5-(28x20)
MRB
C44
C6-(D18)
MRB
C116
C5-(28x20)
MRB
MRB
MRB
C118
C119
C120
C1-(15x10)
C9-(20x12)
C3-(15x22)
MRB
C121
C3-(15x22)
MRB
C122
C3-(15x22)
MRB
C123
C8-(26x25)
MRB
C124
C8-(26x25)
MRB
MRB
MRB
MRB
C125
C126
C127
C128
C2-(12x15)
C2-(12x15)
C2-(12x15)
C2-(12x15)
MRB
C129
C3-(15x22)
0.21
0.018
MRB
C130
C3-(15x22)
0.21
0.022
MRB
C131
C3-(15x22)
0.21
0.022
MRB
C132
C3-(15x22)
0.21
0.022
MRB
C133
C3-(15x22)
0.21
0.022
MRB
C134
C3-(15x22)
0.21
-0.02
MRB
C135
C3-(15x22)
0.21
-0.02
MRB
C136
C3-(15x22)
0.21
-0.02
MRB
C137
C3-(15x22)
0.21
0.022
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 23 of 46
Story ID
Col.
Labe
l
Section
Mmajor
Mminor
kip
kip-ft
kip-ft
PMM
Ratio
or
Reba
r%
Remarks
MRB
C138
C3-(15x22)
0.21
0.022
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
MRB
C139
C140
C141
C142
C143
C144
C145
C146
C147
C148
C149
C150
C151
C152
C153
C154
C155
C156
C157
C158
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.48
2.21
2.21
2.21
2.21
-0.28
-0.28
0.279
0.279
-0.28
-0.28
0.279
0.279
-0.28
-0.28
0.279
-0.28
0.279
0.279
0.279
0.279
0.243
0.243
0.243
-0.24
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OHWTB
C1
C1-(15x10)
23.42
-5.72
-25.8
0.341
OK
OHWTB
C2
C2-(12x15)
45.78
-23.5
-12.5
0.303
OK
OHWTB
C3
C2-(12x15)
-4.85
16.68
-6.42
0.189
OK
OHWTB
C4
C2-(12x15)
9.33
8.484
7.295
0.135
OK
OHWTB
C5
C2-(12x15)
9.39
8.612
7.29
0.136
OK
OHWTB
C6
C2-(12x15)
1.79
-19.7
-11
0.251
OK
OHWTB
C7
C2-(12x15)
44.51
16.04
-10.1
0.223
OK
OHWTB
C8
C3-(15x22)
113.3
37.55
-43.5
0.3
OK
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
C9
C10
C11
C12
C13
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
4.13
4.13
4.13
4.13
4.13
0.433
-0.43
0
0.433
-0.43
0
0
-0.36
0
0
0.005
0.005
0.005
0.005
0.005
OK
OK
OK
OK
OK
OHWTB
C14
C3-(15x22)
19.19
32
-38.6
0.245
OK
OHWTB
C15
C3-(15x22)
2.36E
-04
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
-9.51
-35.9
19.41
0.186
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 24 of 46
Story ID
Col.
Labe
l
Section
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
OHWTB
C21
C3-(15x22)
OHWTB
C22
C5-(28x20)
OHWTB
C23
C5-(28x20)
OHWTB
C24
C5-(28x20)
OHWTB
C25
C5-(28x20)
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
OHWTB
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
OHWTB
C42
C6-(D18)
OHWTB
C43
C6-(D18)
OHWTB
C44
C6-(D18)
OHWTB
OHWTB
OHWTB
OHWTB
C45
C46
C47
C48
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
OHWTB
C49
C8-(26x25)
OHWTB
C50
C8-(26x25)
OHWTB
C51
C8-(26x25)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
4.13
4.13
4.13
4.13
4.13
kip-ft
-0.43
0.433
-0.43
0.433
0.433
kip-ft
0
0
0
0
0
0.005
0.005
0.005
0.005
0.005
OK
OK
OK
OK
OK
-20.5
35.83
-3.15
0.156
OK
160
16
81.5
0.16
OK
25.42
27.67
-38
0.092
OK
24.55
23.43
-43.1
0.09
OK
52.57
-26.3
49.69
0.109
OK
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
1.215
1.215
0
0
0
0
1.215
0
0
0
1.215
0
1.215
0
1.215
0
0
0
-1.3
1.296
-1.3
-1.3
0
1.296
-1.3
-1.3
0
-1.3
0
1.296
0
1.296
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
16.08
-6.66
-22.9
0.188
OK
16.87
-6.52
-26.7
0.218
OK
38.02
-3.7
28.96
0.222
OK
9.62
9.62
9.62
9.62
1.059
1.059
1.059
0
0
0
0
1.107
0.006
0.006
0.006
0.006
OK
OK
OK
OK
152.2
-35.4
48.2
0.125
OK
20.44
31.82
-13.9
0.055
OK
20.56
28.23
-20.4
0.057
OK
Page 25 of 46
Story ID
Col.
Labe
l
Section
OHWTB
C52
C8-(26x25)
OHWTB
C54
C9-(20x12)
Roof
C1
C1-(15x10)
Roof
C2
C2-(12x15)
Roof
C3
C2-(12x15)
Roof
C4
C2-(12x15)
Roof
C5
C2-(12x15)
Roof
C6
C2-(12x15)
Roof
C7
C2-(12x15)
Roof
C8
C3-(15x22)
Roof
C9
C3-(15x22)
Roof
C10
C3-(15x22)
Roof
C11
C3-(15x22)
Roof
C12
C3-(15x22)
Roof
C13
C3-(15x22)
Roof
C14
C3-(15x22)
Roof
C15
C3-(15x22)
Roof
C16
C3-(15x22)
Roof
C17
C3-(15x22)
Roof
C18
C3-(15x22)
Roof
C19
C3-(15x22)
Roof
C20
C3-(15x22)
Roof
C21
C3-(15x22)
Roof
C22
C5-(28x20)
Roof
Roof
Roof
C23
C24
C25
C5-(28x20)
C5-(28x20)
C5-(28x20)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
160.3
40.8
-58
0.14
OK
40.26
-16.9
35.31
0.285
OK
51.19
-7.42
-22.6
0.341
OK
71.45
-22.4
-8.07
0.263
OK
25.12
16.04
-6.94
0.192
OK
28.64
10.39
2.291
0.11
OK
28.04
9.265
2.243
0.1
OK
32.85
-15.6
-6.98
0.19
OK
72.03
18.72
-8.06
0.238
OK
169.2
17.76
-37.6
0.263
OK
46.71
24.88
-38
0.229
OK
44.72
15.61
-36.5
0.203
OK
44.79
16.33
-35.4
0.2
OK
42.68
22.4
-34
0.206
OK
41.28
16.69
-34.2
0.194
OK
62.91
15.64
-35.9
0.207
OK
7.34
-60
13.47
0.218
OK
55.4
-23.8
11.11
0.118
OK
56.98
12.76
-10.7
0.092
OK
57.97
13.31
-12.7
0.101
OK
56.35
20.82
-14.3
0.123
OK
54.31
17.55
-12.5
0.106
OK
48.59
21.89
18.71
0.142
OK
239.1
23.91
28.33
0.167
OK
104.7
100.9
140.1
-12.1
-11.1
-15.3
12.56
-5.23
16.81
0.074
0.071
0.099
OK
OK
OK
Page 26 of 46
Story ID
Col.
Labe
l
Section
Roof
C26
C4-(28x25)
Roof
C27
C4-(28x25)
Roof
C28
C4-(28x25)
Roof
C29
C4-(28x25)
Roof
Roof
Roof
C30
C31
C32
C4-(28x25)
C4-(28x25)
C4-(28x25)
Roof
C33
C4-(28x25)
Roof
Roof
Roof
C34
C35
C36
C4-(28x25)
C4-(28x25)
C4-(28x25)
Roof
C37
C4-(28x25)
Roof
C38
C4-(28x25)
Roof
C39
C4-(28x25)
Roof
C40
C4-(28x25)
Roof
C41
C4-(28x25)
Roof
C42
C6-(D18)
Roof
C43
C6-(D18)
Roof
C44
C6-(D18)
Roof
C45
C7-(26x24)
Roof
Roof
C46
C47
C7-(26x24)
C7-(26x24)
Roof
C48
C7-(26x24)
Roof
Roof
Roof
Roof
C49
C50
C51
C52
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Roof
C53
C9-(20x12)
Story8
C1
C1-(15x10)
Story8
C2
C2-(12x15)
Story8
C3
C2-(12x15)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
82.83
30.69
-9.94
0.063
OK
76.58
25.33
-15.4
0.058
OK
76.73
22.12
-16.2
0.056
OK
80.96
20.69
-32.5
0.067
OK
93.21
87.7
87.68
10.49
9.866
9.863
11.83
-3.6
-3.51
0.055
0.052
0.052
OK
OK
OK
78.78
14.62
-31.8
0.062
OK
93.44
87.96
87.94
10.51
9.895
5.599
13.2
-2.09
-10.6
0.056
0.052
0.052
OK
OK
OK
78.86
14.74
-29.8
0.061
OK
89.84
16.98
14.08
0.057
OK
72.29
23.99
-10.7
0.053
OK
72.35
23.78
-8.68
0.052
OK
75.61
21.87
-26.8
0.062
OK
50.73
-10.9
9.792
0.128
OK
47.53
-11.9
-13
0.145
OK
61.26
-7.88
24.33
0.208
OK
73.09
-14.7
24.52
0.062
OK
79.38
79.43
3.207
8.737
9.128
0.049
0.051
0.051
OK
OK
71.56
10.74
-24.4
0.058
OK
229.4
99.7
100.2
259.9
8.083
12.01
11.27
29.23
26.38
11.47
-0.29
-15.9
0.143
0.062
0.062
0.162
OK
OK
OK
OK
76.02
-14.9
24.46
0.228
OK
79.46
-8.5
-23.6
0.369
OK
93.7
-26.6
-7.5
0.306
OK
57.85
18.52
-8.44
0.231
OK
Page 27 of 46
Story ID
Col.
Labe
l
Section
Story8
C4
C2-(12x15)
Story8
C5
C2-(12x15)
Story8
C6
C2-(12x15)
Story8
C7
C2-(12x15)
Story8
C8
C3-(15x22)
Story8
C9
C3-(15x22)
Story8
C10
C3-(15x22)
Story8
C11
C3-(15x22)
Story8
C12
C3-(15x22)
Story8
C13
C3-(15x22)
Story8
C14
C3-(15x22)
Story8
C15
C3-(15x22)
Story8
Story8
Story8
Story8
Story8
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story8
C21
C3-(15x22)
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
55.37
12.82
-4.43
0.162
OK
57.55
-11
-4.6
0.154
OK
66.15
-16.9
-7.14
0.216
OK
98.28
21.67
-9.57
0.292
OK
225
23.63
-41.8
0.32
OK
100.4
20.64
-31.3
0.206
OK
97.68
10.26
-32.6
0.193
OK
97.58
10.25
-31.6
0.189
OK
91.89
19.15
-28.6
0.189
OK
90.16
9.467
-31
0.182
OK
112.4
22.92
-38.1
0.243
OK
35.66
-63.7
15.44
0.229
OK
135.5
142.7
145
141
137.1
-7.45
1.818
2.57
8.803
1.439
11.86
-12.5
-12.7
-12.3
-12
0.157
0.165
0.169
0.163
0.158
OK
OK
OK
OK
OK
109.5
27.45
23.36
0.192
OK
322.7
182
180.8
215.2
186.8
174
174.2
184
181
170.9
170.9
180.3
181.4
171.3
171.3
180.4
3.464
-18.2
-18.1
-21.5
21.01
11.76
9.464
8.491
6.967
5.706
4.972
4.476
7.154
5.697
4.801
20.29
38.72
-0.05
-6.68
5.137
8.893
-20.9
-20.9
-22.1
21.72
-20.5
-20.5
-21.6
21.76
-20.6
-20.6
-17.3
0.225
0.127
0.127
0.15
0.11
0.102
0.103
0.108
0.107
0.101
0.101
0.106
0.107
0.101
0.101
0.106
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 28 of 46
Story ID
Col.
Labe
l
Section
Story8
Story8
Story8
Story8
C38
C39
C40
C41
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
Story8
C42
C6-(D18)
Story8
C43
C6-(D18)
Story8
C44
C6-(D18)
Story8
Story8
Story8
Story8
Story8
Story8
Story8
Story8
C45
C46
C47
C48
C49
C50
C51
C52
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story8
C53
C9-(20x12)
Story7
C1
C1-(15x10)
Story7
C2
C2-(12x15)
Story7
C3
C2-(12x15)
Story7
C4
C2-(12x15)
Story7
C5
C2-(12x15)
Story7
C6
C2-(12x15)
Story7
C7
C2-(12x15)
Story7
C8
C3-(15x22)
Story7
C9
C3-(15x22)
Story7
C10
C3-(15x22)
Story7
C11
C3-(15x22)
Story7
C12
C3-(15x22)
Story7
C13
C3-(15x22)
Story7
C14
C3-(15x22)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
174
164.6
164.6
173.1
kip-ft
19.57
18.52
18.52
10.58
kip-ft
12.08
-0.16
-0.57
-20.8
0.102
0.097
0.097
0.102
OK
OK
OK
OK
83.31
-13.7
10.2
0.172
OK
81.15
-12.9
-14.1
0.18
OK
86.9
-8.26
27.33
0.238
OK
164.9
154.8
154.7
164.6
314.3
182.6
182.2
343.3
18.14
17.03
17.02
-18.1
35.36
11.14
10.08
38.62
11.74
1.436
0.082
-12.1
20.41
20.99
-21
-18.3
0.106
0.1
0.099
0.106
0.196
0.114
0.114
0.214
OK
OK
OK
OK
OK
OK
OK
OK
116.1
-15.8
28.31
0.272
OK
108.4
-10
-23.4
0.415
OK
117.4
-28.5
-9.39
0.352
OK
91.3
22.09
-9.84
0.289
OK
82.47
14.64
-6.6
0.214
OK
84.27
-13
-6.74
0.206
OK
91.04
-21.4
-7.28
0.269
OK
117.6
26.33
-9.41
0.339
OK
281.6
29.57
-42.2
0.374
OK
155.3
16.3
-36.1
0.247
OK
150.4
15.79
-34.9
0.239
OK
150.3
15.78
-34.2
0.237
OK
143.3
15.05
-33.6
0.23
OK
138.7
14.56
-34.5
0.23
OK
162.4
17.05
-41.6
0.273
OK
Page 29 of 46
Story ID
Col.
Labe
l
Section
Story7
C15
C3-(15x22)
Story7
Story7
Story7
Story7
Story7
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story7
C21
C3-(15x22)
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
Story7
C42
C6-(D18)
Story7
C43
C6-(D18)
Story7
C44
C6-(D18)
Story7
Story7
Story7
Story7
Story7
Story7
Story7
Story7
C45
C46
C47
C48
C49
C50
C51
C52
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story7
C53
C9-(20x12)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
49.18
-66.1
15.61
0.242
OK
206.8
217.2
220.9
214.6
208.3
-7.13
1.763
2.362
8.777
21.87
18.1
-19
-19.3
-18.8
-4.05
0.242
0.249
0.255
0.251
0.239
OK
OK
OK
OK
OK
180.3
18.93
28.55
0.244
OK
412.3
261
258.6
290.4
277.2
258.6
258.8
273.4
268.9
253.9
254
268
269.4
254.5
254.5
268.1
258.2
244.4
244.3
257
41.23
-8.78
-9.98
-29
31.18
11.49
9.431
8.491
30.25
28.57
28.57
30.15
30.3
5.585
28.63
30.16
14.01
12.39
11.52
10.68
24.4
31.32
-31
5.612
10.09
-31
-31.1
-32.8
10.09
-2.43
-2.66
-18
11.56
-30.5
-1.44
-16.5
30.98
-29.3
-29.3
-30.8
0.289
0.182
0.18
0.203
0.163
0.152
0.152
0.161
0.158
0.149
0.149
0.158
0.159
0.15
0.15
0.158
0.152
0.144
0.144
0.151
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
116.8
-16.2
11.09
0.223
OK
116.8
-16.1
-11.1
0.223
OK
112.5
-10.7
27.32
0.266
OK
244.8
230.2
229.9
244.4
400
265.1
263.8
427.6
26.93
25.32
25.29
-26.9
45
11.18
10.35
48.11
13.03
1.302
0.326
-11.4
23.33
30.48
-30.3
-16.7
0.158
0.148
0.148
0.157
0.249
0.165
0.165
0.267
OK
OK
OK
OK
OK
OK
OK
OK
156.7
-16.5
28.91
0.313
OK
Page 30 of 46
Story ID
Col.
Labe
l
Section
Story6
C1
C1-(15x10)
Story6
C2
C2-(12x15)
Story6
C3
C2-(12x15)
Story6
C4
C2-(12x15)
Story6
C5
C2-(12x15)
Story6
C6
C2-(12x15)
Story6
C7
C2-(12x15)
Story6
C8
C3-(15x22)
Story6
Story6
C9
C10
C3-(15x22)
C3-(15x22)
Story6
C11
C3-(15x22)
Story6
C12
C3-(15x22)
Story6
C13
C3-(15x22)
Story6
C14
C3-(15x22)
Story6
C15
C3-(15x22)
Story6
Story6
Story6
Story6
Story6
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story6
C21
C3-(15x22)
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
138.1
-12.6
-25.4
0.494
OK
141.2
-32.5
-11.3
0.413
OK
125.6
26.78
-12.7
0.37
OK
116.5
16.66
-9.32
0.278
OK
114.1
15.4
-9.13
0.268
OK
123
-25.8
-9.84
0.344
OK
149.9
29.33
-12
0.405
OK
338.7
-35.6
-46.4
0.439
OK
233.3
227.1
24.5
23.84
-30.2
-28.6
0.298
0.288
OK
OK
203.5
21.37
-36.8
0.287
OK
194.3
20.4
-36.4
0.277
OK
188.4
19.78
-37.2
0.276
OK
214.1
22.47
-46.7
0.33
OK
55.35
-73.7
17.51
0.27
OK
278.4
291.9
296.8
288.4
279.7
-6.85
30.65
2.343
8.903
29.37
24.36
-1.08
-26
-25.2
-3.68
0.325
0.334
0.341
0.337
0.32
OK
OK
OK
OK
OK
242.5
25.46
33.38
0.315
OK
502.1
339.8
336.3
365.8
368.6
343
343.3
362.6
358.1
337
337
355.5
358.6
50.21
-9.65
-10.5
-14
15.33
11.46
9.338
40.79
40.28
37.91
4.868
39.99
40.34
24.86
-40.8
-40.4
43.89
44.23
-41.2
-41.2
-16.3
9.222
-1.51
-40.4
-17.2
11.53
0.353
0.237
0.235
0.255
0.217
0.202
0.202
0.213
0.211
0.198
0.198
0.209
0.211
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 31 of 46
Story ID
Col.
Labe
l
Section
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
C35
C36
C37
C38
C39
C40
C41
C42
C43
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
Story6
C44
C6-(D18)
Story6
Story6
Story6
Story6
Story6
Story6
Story6
Story6
C45
C46
C47
C48
C49
C50
C51
C52
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story6
C53
C9-(20x12)
Story5
C1
C1-(15x10)
Story5
C2
C2-(12x15)
Story5
C3
C2-(12x15)
Story5
C4
C2-(12x15)
Story5
C5
C2-(12x15)
Story5
C6
C2-(12x15)
Story5
C7
C2-(12x15)
Story5
C8
C3-(15x22)
Story5
Story5
Story5
C9
C10
C11
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story5
C12
C3-(15x22)
Story5
C13
C3-(15x22)
Story5
C14
C3-(15x22)
Story5
C15
C3-(15x22)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
337.8
337.7
355.6
343.6
324.2
324
340.8
161
161.4
kip-ft
38
4.67
40
38.65
12.57
11.7
38.34
-10.7
-10.8
kip-ft
-0.91
-40.5
-15.8
11.63
38.9
38.88
-13.7
-15.6
-15.3
0.199
0.199
0.209
0.202
0.191
0.191
0.201
0.28
0.281
OK
OK
OK
OK
OK
OK
OK
OK
OK
138.2
-13.1
29.83
0.307
OK
325.6
305.4
305.1
323.9
483.3
344.5
345
512.5
35.82
33.59
33.56
-35.6
54.37
12.2
11.22
57.66
11.69
1.686
0.704
-10.9
21.92
39.61
39.68
-16.8
0.21
0.196
0.196
0.209
0.301
0.215
0.215
0.32
OK
OK
OK
OK
OK
OK
OK
OK
197.8
-18.9
32.24
0.372
OK
168.8
-14.5
-25.6
0.55
OK
167.9
-34.3
-13.4
0.463
OK
161.1
30.16
-14.9
0.44
OK
146.6
19.17
-11.7
0.342
OK
143.2
17.96
-11.5
0.331
OK
154.8
-28.9
-12.4
0.41
OK
179
31.87
-14.3
0.464
OK
396.2
-41.6
-48.3
0.499
OK
293.4
286
285.4
30.8
30.02
29.96
-33.5
-32.4
-31.4
0.365
0.355
0.352
OK
OK
OK
245.8
25.81
-41.9
0.34
OK
238.1
-25
-42.6
0.334
OK
266.8
28.01
-50.2
0.382
OK
55.01
-76.7
16.95
0.275
OK
Page 32 of 46
Story ID
Col.
Labe
l
Section
Story5
Story5
Story5
Story5
Story5
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story5
C21
C3-(15x22)
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
Story5
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
C6-(D18)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story5
C53
C9-(20x12)
Story4
C1
C1-(15x10)
Story4
C2
C2-(12x15)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
350.5
366.7
373
362.3
351.2
kip-ft
-6.21
38.51
2.201
8.765
36.88
kip-ft
30.66
3.539
34.22
-31.7
-2.93
0.407
0.42
0.429
0.423
0.402
OK
OK
OK
OK
OK
305.4
32.06
36.87
0.384
OK
592.1
418.3
413.9
441.4
458.3
427.4
427.8
451.4
445.7
420
420.1
442.8
446.2
421
420.9
442.9
427.5
403.9
403.7
424.3
197.2
197.4
206.7
405
380.7
380.3
403.1
569.6
426.2
425.8
597.9
-59.2
-41.8
-11.6
-44.1
14.79
48.08
48.12
50.79
50.14
47.25
47.26
49.81
50.2
5.603
47.35
49.83
48.09
12.82
11.89
47.74
-10.8
-10.9
-10.5
44.55
2.686
1.783
-44.3
64.08
12.8
11.75
67.26
25.17
-0.03
-49.7
6.749
54.99
-5.06
-4.02
-19.2
13.83
-4.16
-2.05
-17
12.68
-50.5
-0.78
-15.2
16.2
48.47
48.44
-12.7
-18.7
-18.8
19.63
15.62
43.78
43.73
-9.9
21.22
49.02
48.97
-15.9
0.416
0.292
0.289
0.308
0.27
0.251
0.252
0.266
0.263
0.247
0.247
0.261
0.263
0.248
0.248
0.261
0.252
0.238
0.238
0.25
0.343
0.343
0.359
0.261
0.245
0.244
0.259
0.355
0.266
0.265
0.373
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
239.5
-19.8
33.54
0.429
OK
200.1
-16.1
-25.6
0.605
OK
192.4
-36.9
-15.4
0.516
OK
Page 33 of 46
Story ID
Col.
Labe
l
Section
Story4
C3
C2-(12x15)
Story4
C4
C2-(12x15)
Story4
C5
C2-(12x15)
Story4
C6
C2-(12x15)
Story4
C7
C2-(12x15)
Story4
C8
C3-(15x22)
Story4
Story4
Story4
C9
C10
C11
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story4
C12
C3-(15x22)
Story4
C13
C3-(15x22)
Story4
C14
C3-(15x22)
Story4
C15
C3-(15x22)
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
197.8
33.69
-17.3
0.512
OK
177.6
21.79
-14.2
0.408
OK
177
19.02
-14.2
0.397
OK
186.7
-31.8
-14.9
0.476
OK
216
33.07
-17.3
0.527
OK
454.1
-47.7
-49.9
0.56
OK
356.1
347.6
346.8
37.39
36.49
36.42
-31.8
-30.5
-29.6
0.424
0.413
0.41
OK
OK
OK
300.3
31.53
-42.6
0.393
OK
290.5
-30.5
-43.6
0.386
OK
321
33.7
-53.9
0.442
OK
46.83
-78.4
18.22
0.28
OK
427.8
444.4
451.9
436.6
423.2
395.1
685.7
497
491.9
522
556.4
514.6
517.9
556.2
541.9
506
508.7
538.4
545.1
509.7
509.5
535.6
519.8
-5.16
46.66
47.45
8.388
0.363
22.11
68.57
-49.7
-49.2
-17.3
62.6
10.53
58.26
62.57
60.96
5.403
57.22
60.57
61.33
57.34
57.32
4.495
14.09
37.43
2.463
0.123
-38.2
-37
34.57
23.76
-0.34
-4.45
62.63
9.937
-61.8
-3.22
-15.4
10.86
-60.7
-1.57
-14.7
11.8
-0.25
-0.33
-64.3
62.38
0.494
0.509
0.518
0.508
0.485
0.458
0.481
0.347
0.343
0.364
0.327
0.303
0.305
0.327
0.319
0.298
0.299
0.317
0.321
0.3
0.3
0.315
0.306
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 34 of 46
Story ID
Col.
Labe
l
Section
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
Story4
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
C6-(D18)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story4
C53
C9-(20x12)
Story3
C1
C1-(15x10)
Story3
C2
C2-(12x15)
Story3
C3
C2-(12x15)
Story3
C4
C2-(12x15)
Story3
C5
C2-(12x15)
Story3
C6
C2-(12x15)
Story3
C7
C2-(12x15)
Story3
Story3
Story3
Story3
C8
C9
C10
C11
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story3
C12
C3-(15x22)
Story3
C13
C3-(15x22)
Story3
C14
C3-(15x22)
Story3
C15
C3-(15x22)
Story3
Story3
Story3
Story3
Story3
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
484
483.7
508.1
233.5
233.6
239.5
492.5
456.3
455.7
482.3
659.1
507.8
506.4
683.7
kip-ft
12.56
54.42
57.16
-11
-11.2
-11.2
2.504
50.19
1.598
-1.24
74.14
14.43
13.14
7.063
kip-ft
58.08
0.748
-10.9
-23.9
-22.2
22.75
56.63
2.189
52.41
-55.5
21.15
58.4
58.23
-78.6
0.285
0.285
0.299
0.406
0.406
0.416
0.317
0.293
0.293
0.31
0.411
0.317
0.316
0.426
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
281.5
-22.5
34.46
0.492
OK
231.9
-17.6
-24.9
0.669
OK
216.5
-39.1
17.32
0.565
OK
235.9
36.87
-19.7
0.585
OK
209.4
24.11
-16.8
0.476
OK
208.1
21.79
-16.6
0.464
OK
218.8
-34.4
-17.5
0.539
OK
247.3
35.87
-19.8
0.592
OK
530.7
416.4
406.9
406.1
-55.7
7.323
42.73
5.383
-39.2
-36.4
-29.6
-35.5
0.616
0.484
0.471
0.47
OK
OK
OK
OK
353.1
-37.1
-46.2
0.452
OK
341.4
-35.8
-47.9
0.445
OK
376.4
-39.5
-56.7
0.501
OK
37.31
-80.3
19.03
0.286
OK
501.3
520.1
529
511.5
495.6
-3.71
54.61
1.867
8.106
52.03
43.87
3.531
46.29
-44.8
-0.2
0.575
0.596
0.606
0.593
0.568
OK
OK
OK
OK
OK
Page 35 of 46
Story ID
Col.
Labe
l
Section
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
Story3
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C3-(15x22)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
C6-(D18)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
C8-(26x25)
C8-(26x25)
C8-(26x25)
Story3
C53
C9-(20x12)
Story2
C1
C1-(15x10)
Story2
C2
C2-(12x15)
Story2
C3
C2-(12x15)
Story2
C4
C2-(12x15)
Story2
C5
C2-(12x15)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
462.8
777.1
575.9
570
599
646.4
599.6
602.9
645.3
630.1
589.7
592.4
625.9
633.4
593.6
593.5
623.2
604.3
564.4
564.1
591.8
270
270.1
273.3
572.3
532.3
531.7
561.5
746.3
589.3
586.8
770
kip-ft
20.7
-77.7
-9.71
-57
-59.9
72.71
67.46
67.83
72.59
7.161
66.34
66.65
70.41
71.26
66.78
66.77
70.11
67.98
63.5
63.46
66.58
-11.4
-11.5
-11.4
62.95
58.56
2.145
-61.8
83.95
12.24
66.02
86.62
kip-ft
40.5
26.32
-69.1
-3.75
3.598
8.632
-1.94
-2.59
-12.7
75.61
-0.58
-1.04
-12.5
11.68
0.35
0.261
-11
12.16
1.606
1.479
-8.93
25.65
-25.7
25.96
11.87
2.346
61.14
-6.86
21.37
67.76
2.852
-12.6
0.54
0.545
0.402
0.397
0.418
0.38
0.353
0.355
0.38
0.371
0.347
0.349
0.368
0.373
0.349
0.349
0.367
0.355
0.332
0.332
0.348
0.469
0.469
0.474
0.368
0.342
0.342
0.361
0.465
0.367
0.366
0.48
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
324.2
-25.9
34.2
0.556
OK
263.9
-19.8
-27.5
0.756
OK
240.7
-46.6
-19.3
0.648
OK
274.6
37.6
-22
0.648
OK
242
29.27
-19.4
0.555
OK
240
27.41
-19.2
0.544
OK
Page 36 of 46
Story ID
Col.
Labe
l
Section
Story2
C6
C2-(12x15)
Story2
C7
C2-(12x15)
Story2
C8
C3-(15x22)
Story2
Story2
Story2
Story2
C9
C10
C11
C12
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story2
C13
C3-(15x22)
Story2
C14
C3-(15x22)
Story2
C15
C3-(15x22)
Story2
Story2
Story2
Story2
Story2
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story2
C21
C3-(15x22)
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
Story2
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
kip-ft
kip-ft
251.5
-36.9
-20.1
0.604
OK
278.6
42.3
-22.3
0.677
OK
571.2
-60
-65.9
0.711
OK
477.2
466.9
466
443.2
7.003
49.02
5.405
10.71
-41.8
-32.4
-40.8
-38.8
0.553
0.538
0.538
0.517
OK
OK
OK
OK
392.5
-41.2
-51.6
0.503
OK
432.5
-48.6
-77.8
0.612
OK
253.2
-11.2
22.16
0.295
OK
576.1
596.6
607
587.1
568.7
-60.5
62.64
1.337
8.027
-59.7
7.06
2.259
-57.8
-51.4
-3.03
0.66
0.683
0.698
0.679
0.652
OK
OK
OK
OK
OK
498.1
52.3
64.27
0.636
OK
869.7
655.7
649.2
677.5
737.2
685.7
689.1
735.2
719.3
674.5
677.4
714.3
722.9
678.7
678.7
711.7
689.8
645.9
645.6
676.4
307.3
307.3
86.97
-17.3
-14.4
-17.8
82.93
77.14
9.454
82.71
80.92
7.718
5.754
80.36
81.32
6.619
76.35
80.06
77.6
72.66
72.63
76.1
-12.6
-13.2
13.45
-78.7
-77.9
81.3
9.607
-1.84
-82.7
-11.7
11.05
-80.9
81.28
-10.2
12.85
81.45
2.587
-7.79
15.38
3.651
4.208
-5
-29.2
-29.2
0.607
0.457
0.453
0.472
0.434
0.403
0.405
0.432
0.423
0.397
0.398
0.42
0.425
0.399
0.399
0.419
0.406
0.38
0.38
0.398
0.533
0.533
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 37 of 46
Story ID
Col.
Labe
l
Section
Story2
Story2
Story2
Story2
Story2
C44
C45
C46
C47
C48
C6-(D18)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
Story2
C49
C8-(26x25)
Story2
C50
C8-(26x25)
Story2
C51
C8-(26x25)
Story2
C52
C8-(26x25)
Story2
C53
C9-(20x12)
Story1
C1
C1-(15x10)
Story1
C2
C2-(12x15)
Story1
C3
C2-(12x15)
Story1
C4
C2-(12x15)
Story1
C5
C2-(12x15)
Story1
C6
C2-(12x15)
Story1
C7
C2-(12x15)
Story1
C8
C3-(15x22)
Story1
Story1
Story1
Story1
Story1
C9
C10
C11
C12
C13
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story1
C14
C3-(15x22)
Story1
C15
C3-(15x22)
Story1
Story1
Story1
Story1
Story1
C16
C17
C18
C19
C20
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
Story1
C21
C3-(15x22)
Story1
C22
C5-(28x20)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
307.9
653.1
609.4
608.7
641.4
kip-ft
-13.4
2.771
67.03
66.95
-0.91
kip-ft
29.25
75.1
5.474
5.022
-73.8
0.534
0.42
0.392
0.391
0.412
OK
OK
OK
OK
OK
713.4
153.2
235.6
0.584
OK
570.9
145.3
207.1
0.501
OK
560.6
126.8
207
0.483
OK
750
84.37
-246
0.561
OK
367.7
-29.4
38.55
0.63
OK
301.5
-42.3
-95.3
1.611
Not OK
280.2
-64
-30.2
0.863
OK
328.9
-52
37.88
0.891
OK
298.8
31.98
-41.1
0.776
OK
296.3
31.66
-40.8
0.77
OK
302.3
58.96
33.94
0.877
OK
325.6
59.72
-36.7
0.923
OK
650.7
-75.4
-126
0.954
OK
540.7
529.7
528.8
503.2
483.2
-56.8
-55.6
-55.5
5.25
-50.7
-26.2
-29.4
-28.2
-44
-26.7
0.619
0.607
0.606
0.58
0.554
OK
OK
OK
OK
OK
503
101.3
84.24
0.765
OK
311.6
-11.1
27.27
0.364
OK
654.9
676.5
688.5
666.2
645.4
-0.08
0.011
-0.05
5.437
-1.17
102.6
129.8
149.9
133.8
117.7
0.832
0.928
0.999
0.936
0.867
OK
OK
OK
OK
OK
577.1
66.27
104.6
0.822
OK
888.7
-98.1
-307
0.753
OK
Page 38 of 46
Story ID
Col.
Labe
l
Section
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
Story1
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
Story1
C44
C6-(D18)
Story1
Story1
Story1
Story1
C45
C46
C47
C48
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
Story1
C49
C8-(26x25)
Story1
C50
C8-(26x25)
Story1
C51
C8-(26x25)
Story1
C52
C8-(26x25)
Story1
G.F
C53
C1
C9-(20x12)
C1-(15x10)
G.F
C2
C2-(12x15)
G.F
G.F
G.F
G.F
C3
C4
C5
C6
C2-(12x15)
C2-(12x15)
C2-(12x15)
C2-(12x15)
G.F
C7
C2-(12x15)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
745.1
733.3
761.8
834.1
787.6
781.6
830.6
814.9
775
768.7
808.1
818.7
779.6
770.3
805.6
781.7
742.6
733.5
766.4
346
346.6
kip-ft
-74.5
-73.3
-76.2
-93.8
3.07
87.93
93.44
-91.7
-87.2
-86.5
90.91
-0.29
-87.7
-86.7
-0
87.94
83.54
82.52
86.22
-32.9
-9.37
kip-ft
2.216
0.573
1.419
6.061
-94.5
0.48
-7.56
7.289
2.019
0.113
-8.18
98.25
-1.13
0.078
-96.7
10.08
-1.5
-0.21
-8.22
10.51
-32.9
0.52
0.511
0.531
0.491
0.463
0.46
0.489
0.479
0.456
0.452
0.475
0.482
0.459
0.453
0.474
0.46
0.437
0.431
0.451
0.6
0.6
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
313.2
-10.3
-52.7
0.603
OK
739.6
700.8
691.5
726.2
81.36
77.09
-76.1
-2.23
9.924
2.729
-1.94
-83.5
0.475
0.451
0.445
0.467
OK
OK
OK
OK
802.4
190.2
274.6
0.679
OK
669.7
175.1
265.7
0.611
OK
669.3
164.8
266.1
0.604
OK
845.2
100.2
329.1
0.686
OK
0
357.4
0
-26.8
0
-22.4
O/S
0.963
Not OK
OK
332.5
-16.3
-26.6
0.673
OK
388.6
351.7
353.5
390.4
1.588
-0.6
-0.17
-3.67
-31.1
-28.1
-28.3
-31.2
0.77
0.693
0.694
0.781
OK
OK
OK
OK
355.2
22.62
-28.4
0.739
OK
Page 39 of 46
Story ID
Col.
Labe
l
Section
G.F
G.F
G.F
G.F
G.F
G.F
G.F
C8
C9
C10
C11
C12
C13
C14
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
G.F
C15
C3-(15x22)
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
G.F
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C3-(15x22)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C5-(28x20)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C4-(28x25)
C6-(D18)
C6-(D18)
C6-(D18)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C7-(26x24)
C8-(26x25)
PMM
Ratio
or
Reba
r%
Remarks
Mmajor
Mminor
kip
748
627.5
623.6
620.5
593.4
548.6
584.2
kip-ft
-7.01
-65.9
-65.5
-65.1
62.3
-57.6
7.774
kip-ft
-65.5
-20
-23.8
-22.7
-22.4
-21.3
-51.1
0.861
0.72
0.715
0.711
0.68
0.629
0.676
OK
OK
OK
OK
OK
OK
OK
364.9
15.83
31.93
0.426
OK
719.9
740.7
752.9
727.5
703.9
678.4
1154
851
814.8
838.7
969.4
920.9
876.7
919.6
968
917.9
861.5
896
966.9
919.3
862.9
893.8
922.4
878.1
822.6
850.5
384.5
376.3
378.6
837.5
792.4
764.1
805.8
1042
75.59
77.78
79.05
76.38
-73.9
9.062
115.4
-85.1
-9.86
-83.9
-109
103.6
98.63
2.306
-1.83
-103
96.92
100.8
108.8
103.4
0.342
100.6
103.8
98.78
92.54
95.68
-36.5
-6.37
-5.84
92.13
87.17
-1.38
-88.6
117.2
19.99
19.79
19.97
19.3
18.84
59.36
8.25
-1.11
-97.8
-2.95
-0.56
-4.59
-3.49
-110
-116
-1.65
-3.96
-9.33
0.905
-4.89
-104
-9.72
-0.03
-5.31
-4.3
-9.85
11.55
-35.7
-36
0.896
-4.06
-87.9
-9.2
6.042
0.828
0.852
0.866
0.837
0.81
0.785
0.805
0.593
0.568
0.585
0.57
0.542
0.516
0.541
0.569
0.54
0.507
0.527
0.569
0.541
0.508
0.526
0.543
0.517
0.484
0.5
0.666
0.651
0.655
0.538
0.509
0.491
0.518
0.649
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Page 40 of 46
Story ID
G.F
G.F
G.F
G.F
Col.
Labe
l
C50
C51
C52
C53
Section
C8-(26x25)
C8-(26x25)
C8-(26x25)
C9-(20x12)
Mmajor
Mminor
kip
855.5
848.5
1058
0
kip-ft
96.24
95.46
119
0
kip-ft
-3.62
-1.99
-14.5
0
PMM
Ratio
or
Reba
r%
Remarks
0.533
0.529
0.659
O/S
OK
OK
OK
Not OK
Note: The TABLE: Concrete Column PMM Envelopes red filled cells values indicate the failure of the
corresponding column due to the non-compliance of column load (P)-Moment in Major Axis (M)-Moment
in Minor Axis (M) Ratios or, to the non-compliance of provided Rebar Percentage. Here, column labelled as
C53-section size: 20// x 12//, section ID: C9, has failed in two consecutive stories because of i.) Over stressing
due to provided percentage of rebar as compared to the section & ii.) Governing column load here; both of the
phenomena indicating the corresponding column section needs to be retrofitted to RC9-(28x20) and RC1(23x18). Please, also note that, since, this table has been extracted after design, thats why, the columns P,
Mmajor & Mminor shown with no value caused O/S; specifically, its O/S # 5. In case of type: O/S # 5, P, Mmajor
& Mminor values will be shown zero by ETABS; & this O/S type causes if the column factored axial load
exceeds Eulers force.
Page 41 of 46
V.
Story
/Level
Pier
ID
GF
P1
GF
P2
GF
P3
GF
P4
GF
P5
Load
Combo
Maximum
Ultimate
Axial
Force
from
ETABS
Compressive
strength of
Wall
Materials,
Effectiv
e Area
of shear
wall (AgAs )
Area
of
provi
ded
steel
Yield
strength
of steel
Nominal
Axial
strength
with
bending
Pu
f/m
Ae
As
fy
P0
Kip
Ksi
in2
in2
Ksi
Kip
Bot.
200.6
4.297
4580.6
9.4
60.0
11417.3
Complia
nt
Bot.
286.0
4.297
12836.9
15.1
60.0
31347.2
Complia
nt
Bot.
538.0
4.297
12836.9
15.1
60.0
31347.2
Complia
nt
Bot.
161.0
4.297
12836.9
15.1
60.0
31347.2
Complia
nt
Bot.
189.0
4.297
4580.6
9.4
60.0
11416.5
Complia
nt
Loc.
Accord 3
(1.05 * D.L
+ 1.25 *
L.L + 1.0 *
WX
Accord 2
(1.05 * D.L
+ 1.25 *
L.L - 1.0 *
WX)
Accord 5
(1.05 * D.L
+ 1.25 *
L.L - 1.0 *
Wy)
Accord 2
(1.05 * D.L
+ 1.25 *
L.L - 1.0 *
WX)
Accord 3
(1.05 * D.L
+ 1.25 *
L.L + 1.0 *
WX
Remarks
Story
/Level
GF
GF
GF
GF
GF
Pier
ID
P1
P2
P3
P4
P5
Wall
Length
Wall
Heig
ht
Area
of
provi
ded
steel
ft
ft
in2
3.75
10.5
10.5
10.5
3.75
8.5
8.5
8.5
8.5
8.5
9.42
15.12
15.12
15.12
9.42
Steel
Ratio
0.025
0.014
0.014
0.014
0.025
Modul
ar
Ratio
8
8
8
8
8
Major
Shear
from
ETABS
Shear
Strength
provided
by
Concrete
Shear
Strength
provided
by Rebar
Nominl
Shear
Strength
Kip
Kip
Kip
Kip
63.69
139
145
142
56
947.7
2653.5
2653.5
2653.5
947.7
54236.2
87091.2
87091.2
87091.2
54144.0
55184
89745
89745
89745
55092
Remarks
Compliant
Compliant
Compliant
Compliant
Compliant
Page 42 of 46
VI.
Beam Evaluation
Table: Adequacy of Beams as per ACCORD Standard considering live load of 42 psf
Story
No of Beams
Passed
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
Roof
8th floor
7th floor
6th floor
5th floor
4th floor
3rd floor
2nd floor
1st floor
GF
VII.
Deficient
Nil
Nil
Nil
Nil
Nil
Nil
Nil
Nil
Nil
Nil
Remarks
Ok
Ok
Ok
Ok
Ok
Ok
Ok
Ok
Ok
Ok
Figure: SAFE Slab Analysis Output Moments for ACCORD Load Combination -1
Note: From the above analysis, it can be assessed that the floor slab is safe under live load 42 psf with structural dead
load. Floor slab is restricted to carry below live load 42 psf in all floor. From the legend bar of SAFE slab analysis for
load combination ACCORD -1: (1.2 x DL + 1.6 x LL), its limited to such a way that, it can clearly be seen that, the slab
is OKAY against the governing moment.
Page 43 of 46
Figure: SAFE Slab Analysis Output Punching Design Indications for ACCORD Load Combination -1
Note: The punching shear design also showing theres no concern of shear failure of slab as all the stiffened locations
are showing N/C. So, the slabs provided thickness is OKAY.
Lab
el
C1
C53
C1
C53
Story
Section
Story1
RC1(23x18)
Story1
RC9(28x20)
G.F
RC1(23x18)
G.F
RC9(28x20)
PMM Ratio or
Rebar %
0.588
0.994
0.526
0.542
0.685
0.649
0.542
0.553
Page 44 of 46
9. References:
1. ACI 437R-03, Strength Evaluation of Existing Concrete Buildings, American Concrete Institution.
2. ACI 318-99, Building Code Requirements for Structural Concrete, American Concrete Institution, 1999.
3. ACI 562, Code Requirements for Evaluation, American Concrete Institution.
4. ASTM E2018-08, Standard Guide for Property Condition Assessment: Baseline Property Condition Assessment
Process.
5. American Society for Testing and Materials, 2008.
6. BNBC - 2006, Bangladesh National Building Code.
Page 45 of 46