Probadores de

Balastos e Ignitores
Testers

220 V
50 Hz

1758300

24

1758200

117

117

38

38

60

24

36

Cdigo

Lmparas

Code

Lamps

Mercurio a alta presin

High pressure mercury

1758100

Sodio a alta presin

High pressure sodium

Halogenuros metlicos
Metal halide

Mercurio a alta presin

High pressure mercury

1758200

Sodio a alta presin

High pressure sodium

Halogenuros metlicos
Metal halide

Sodio a alta presin

High pressure sodium

Metal halide

117

49

60

60

36

36

Potencia
Power

W
50...125W
50...100W
35...100W
250-400W
150...400W

Probadores de Balastos
Los probadores de balastos, se utilizan para medir
balastos sin desarmar la luminaria ni desconectar los balastos,
ya que lo nico que debe hacerse es quitar la lmpara
y colocar en su lugar el probador.
El estado del balasto se visualiza mediante indicadores
luminosos.

150...400W

Ballasts Testers
50...1000W

1758300
Halogenuros metlicos

1758100

HQI-HGMI 35...1000W
HPI 250...2000 (220V)

Probador Universal de Ignitores

Este probador mide los pulsos de alta tensin del ignitor
e indica su estado por medio de indicadores luminosos
de la siguiente manera.

Are used to measure ballast without dismantling the fixture

or disconnecting the ballast itself. It is only necessary to
take the lamp out of the fixture and place the tester instead.
The ballast state is viewing through light indicators.

Ignitor Tester
This tester measures the ignitor high tension pulses,
and it indicates its state through light indicators:

LED 1

Mide pulsos mayores a 600V (Halogenuros metlicos,

tipo HPI de 250-400-1000 y 2000W).

LED 1

It measures pulses higher than 600V

(Metal Halide, HPI type of 250-400-1000 and 2000W).

LED 2

Mide pulsos mayores a 1700V (Sodio de 50 y 70W).

LED 2

It measures pulses higher than 1700V (Sodium 50

and 70W).

LED 3

Mide pulsos mayores a 2800V (Resto de Sodio y

Halogenuros metlicos).

LED 3

It measures pulses higher than 2800V (Remaining

powers of sodium and metal halide).

05/2006