Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Applic:
Issue No:
Date:
Pumps
covered:
PUMP SPECIFICATION
Rotation:
Governor type:
Governor spring position :
Governor spring position :
Gov. Link Length:
Drive Type:
Scroll plate max. fuel delivery adjustment.
Plunger Diameter:
Transfer pressure adjuster in end plate.
Viscosity compensating device in end plate.
Torque Control Screw.
Advance Type:
Solenoid voltage:
OEM Code:
Clockwise.
Mechanical all-speed.
1 000W
2 001W/008W
41.5 0.5 mm.
Supported shaft.
7.0 mm (4 off).
HA3000/HA2500/HA700/AVM/PGM
ISO 4113 at 40 2C.
0.1 bar
ISO 7440 + YDB288 Edge filter assy.
BDL0S6844
172 + 3 - 0 bar.
6 x 2 x 845 mm (ISO 4093.2).
PRE-TEST NOTES
Screw transfer pressure adjuster fully in and then 9.5 turns
out before commencing test.
Advance Reading:
Torque screw flush with inside of governor cover.
Fit auto-advance gauge and set to zero.
A 2.0mm shim is fitted to the piston spring cap on assembly.
This must NOT be removed.
Operation
1.
Priming
2.
Advance
(S) 900
3.
Max.
Delivery
4.
5.
6.
7.
8.
14.
Advance
S/C 900
15.
Max.
Delivery
16.
17.
18.
19.
20.
Delivery