Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Symbol
Min.
Typical
Max.
Unit
Vcc3
-0.5
+3.6
Storage Temperature
Ts
-5
+85
Operating Humidity
RH
+5
+95
Supply Voltage
Typical Max.
+70
3.3
3.47
300
1.0
10.3125
-
Unit Notes
C
V
mA
W
Gbps
Notes
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter
Symbol
Min.
Typ.
Max.
Units
Notes
Transmitter
Differential Data Input Swing
Input Differential Impedance
Normal
Operation
Tx_Fault
Transmitter
Fault
Normal
Operation
Tx_Disable
Laser Disable
Vin,P-P
ZIN
120
80
100
850
120
mVPP
VOL
0.8
VOH
2.0
VCC
VIL
0.8
VIH
2.0
VCC+0.3
V
V
Receiver
Differential Date Output
Output Differential Impedance
Output Rise Time(20-80%)
Output Fall Time (20-80%)
Normal
Operation
Rx_LOS
Lose Signal
Vout
ZD
TR
TF
100
80
24
24
100
-
800
120
-
mV
ps
ps
VOL
0.8
VoH
2.0
VCC
Optical Characteristics
Table 4-Optical Characteristics
Parameter
Symbol Unit
Min
Typ
Optical transmitter Characteristics
Bit Rate
Center Wavelength
Range
Average Launch power
Tx_off
Launch Optical Power
Max
BR
Gbps
9.953
10.3125
11.3
nm
1290
1310
1330
Poff
dBm
-45
P0
dBm
-7.5
Extinction Ratio
ER
dB
3.8
Jitter P-P
JP
ps
27
Jitter RMS
JR
ps
Tr/tf
ps
100
Eye Diagram
Notes
Bit Rate
BR
Gbps
9.953
10.3125
11.3
Receiver Sensitivity
Overload Input Optical
Power
Center Wavelength
Range
RS
dBm
-14.7
PIN
dBm
nm
1290
1310
1330
LOSD
LOSA
dBm
-24.5
-15.5
-
LOS
LOS Hysteresis
dB
0.5
Note:
1.
2.
31
Pin arrangement
9
10
11
12
13
14
15
16
17
18
19
20
Symbol
Name/Description
VEET
Module Transmitter Ground
TX_FAULT
Module Transmitter Fault
TX_DISABLE Transmitter Disable; Turns off transmitter laser output
SDA
2-Wire Serial Interface Data Line (MOD-DEF2)
SCL
2-Wire Serial Interface Clock (MOD-DEF1)
Module Absent, connected to VEET or VEER in the
MOD_ABS
module
Rate Select 0, optionally
controls SFP+ module
RS0
receiver
as the following when HIGH input Bit Rate>4.25 Gbps
Receiver
Loss
Signal
Indication
FC
and when
LOWofinput
Bit Rate
4.25 (in
Gbps.
RX_LOS
designated as RX_LOS, in SONET designated as
LOS,
Rate
Select
1,
optionally
and in Ethernet designatedcontrols
as NOT SFP+
Signalmodule
Detect)
transmitter as the following when HIGH input
RS1
Bit Rate>4.25 Gbps and when LOW input
Bit Rate 4.25 Gbps.
VEER
Module Receiver Ground
VEER
Module Receiver Ground
RDReceiver Inverted Data Output
RD+
Receiver Non-Inverted Data Output
VEER
Module Receiver Ground
VCCR
Module Receiver 3.3 V Supply
VCCT
Module Transmitter 3.3 V Supply
VEET
Module Transmitter Ground
TD+
Transmitter Non-Inverted Data Input
TDTransmitter Inverted Data Input
VEET
Module Transmitter Ground
Note:
1.
The module ground pins are isolated from the module case.
2.
The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
3.
Notes
1
2
3
1
1
Mechanical
Order Information
Table 6-Order Information
Part No.
Bit Rate
(Gbps)
Laser
TX(nm)
Laser
RX(nm)
Fiber
Type
DDMI
Connector
SOSP-3199-20
10.3125
1310
1310
SMF
YES
LC
l Notice
SINOVO reserves the right to make changes to or discontinue any optical link product or service
identified in this publication, without notice, in order to improve design and/or performance. Applications
that are described herein for any of the optical link products are for illustrative purposes only. SINOVO
makes no representation or warranty that such applications will be suitable for the specified use without
further testing or modification.
l Contact
Shenzhen Sinovo Telecom Co. Ltd
Website:www.sinovocorp.com Email:sales@sinovocorp.com
Tel:+86(0)0755-3295 9919 Fax:+86(0)755 3295 9918
Factory ADD: 5/F Chuang Park,Taoyuan Street,Baoan District,Shenzhen,China 518000
Head Quarter:11/F,Taibang Technology Building,Gaoxin South 4th,Science and Technology Park
South,Nanshan,Shenzhen,China 51804
SFP+ 10G LR
Transceiver
SOSP-3199-20