Documentos de Académico
Documentos de Profesional
Documentos de Cultura
http://www.yeastar.c om
1/14
Contents
1. PREPARATION BEFORE INSTALLATION .................................................................. 3
2. HARDWARE SPECIFICATIONS .............................................................................. 4
2.1 Overview .................................................................................................. 4
2.2 LED Indicators and Ports .............................................................................. 5
2.3 Specifications and Operating Environment ....................................................... 6
3. MYPBX U100 & U200 INSTALLATION ..................................................................... 7
3.1 Placement Instructions ................................................................................ 7
3.2 Installation Instructions ............................................................................... 7
3.2.1 Connection of Ethernet Ports...................................................................... 7
3.2.2 Connection of FXO/GSM/UMTS/BRI ports ..................................................... 8
3.2.3 Connection of FXS ports ............................................................................ 9
3.2.4 Power Connection ...................................................................................10
3.2.5 Overall Flow Chart ..................................................................................10
4. MYPBX U100 & U200 BASIC CONF IGURATIONS ......................................................11
4.1 Factory Defaults ........................................................................................11
4.2 Logging in the Web Configuration Panel .........................................................11
4.3 Network Settings .......................................................................................12
4.4 Extensions Setup and management ..............................................................13
4.5 Conf iguring Terminals ................................................................................13
4.6 Making/Receiving calls ................................................................................13
4.7 Reset to Factory Defaults ............................................................................14
5. CONCLUSION ...................................................................................................14
http://www.yeastar.c om
2/14
Unit
QTY
Description
PC
PC
1
1
Warranty card
CD
PC
PC
1
1
phone line
Network Cable
PC
PC
http://www.yeastar.c om
2
1
3/14
PC
Mounting ear
PC
Screws
PC
2. Hardware Specifications
2.1 Overview
http://www.yeastar.c om
4/14
LED
Power
RUN
1-16
Indication
Power status
Status
Description
On
Off
MyPBX status
Blinking
Not Blinking/Off
Red light
http://www.yeastar.c om
5/14
Red light
port
status
Orange light
Green light
Ports
RJ11 ports
Description
FXO port (red light): For the connection of PSTN lines or FXS ports of traditional PBX.
MyPBX users could make or receive calls via FXO port.
FXS port (green light): For the connection of analog phones.
BRI port (orange light): For the connection of ISDN BRI lines. MyPBX users could make or
receive calls via BRI port.
Note: The sequence number of the ports corresponds to that of the Indicator lights in the
front panel. (I.e. the LED lights in the front indicate the connection status of the
corresponding ports at the back panel.)
Antenna ports
Console port
For debugging.
USB port
Ethernet ports
MyPBX U100 & U200 provides two 10/100 adaptive RJ45 Ethernet ports, marked as LAN
and WAN.
-LAN port: LAN port is for the connection to Local Area Network (LAN).
-WAN port: WAN port is the network port for the connection to internet. It supports DHCP
server, PPPoE/dynamic DNS, and static IP for IP address assignment.
Reset Button
Power port
Power Supply
220 V,5060 Hz
Operating Temperature
0C~50C (32F~122F)
Storage Temperature
Operating Humidity
-10C~65C (14F~149F)
5%~90% (Non-condensing)
http://www.yeastar.c om
6/14
0%~95% (Non-condensing)
Weight
2.1 kg
Ambient Temperature: to avoid overheating, please do not run MyPBX U100 & U200 in the place where
Anti-jamming: there may be some sources of interference that might affect the normal running of
MyPBX U100 & U200. Its highly recommended that the device
Should be placed away from high-power radio, radar transmitters and high frequency, and
high-current devices.
Is using independent power junction box and effective anti-grid interference measures have been
taken.
Mechanical load: Please make sure that the device is placed steadily to avoid any accident that might
cause damage. If placed on the desktop, please ensure it is horizontally placed.
http://www.yeastar.c om
7/14
http://www.yeastar.c om
8/14
http://www.yeastar.c om
9/14
http://www.yeastar.c om
10/14
Fi gure 4-1 MyPBX Web Confi gura tion Panel Login Page
http://www.yeastar.c om
11/14
Via the configuration interface, the admin can make all the system configurations, including network settings
(LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (system prompts, time zone,
password, etc.); internal settings (Web access port, user extension range, business hours, conference room,
paging and intercom, music on Hold, etc.); inbound routes; outbound routes; user account management (add
or delete an extension account, IP restriction, features setup, etc.); extended function management (call
queue, conference room, IVR, etc.); call logs (search, download); firmware update and reset, etc.
Please note that after saving the changes, please remember to click the Apply changes button to make
the changes take effect.
WAN Settings
Click Network Settings->WAN Settings on the left menu bar.
1. If the network that the WAN port is connected to is using DHCP server as connection method, please
select the DHCP (dynamic IP) option.
2. If the network connection method is Static IP address, please select this option and enter the LAN
parameters (IP address, subnet mask, default gateway, DNS, etc.)
3. If MyPBX is connected to ADSL adapter directly, please select PPPoE option and enter the ADSL
http://www.yeastar.c om
12/14
http://www.yeastar.c om
13/14
5. Conclusion
This Installation Guide only explains the installation and basic settings of MyPBX U100 and U200 for making
and receiving calls. For more functionality and advanced settings of MyPBX U100 and U200, please refer to
the relative documents as below:
MyPBX U100 Datasheet
MyPBX U200 Datasheet
MyPBX U100 & U200 Administrators Guide
MyPBX U100 & U200 Users Guide
[The End]
http://www.yeastar.c om
14/14