Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Networking)
Definition of PC Assembly:
A PC computer is a modular type of computer, it can be assembled
using hardware components made by different manufacturers, so as to have
a custom built computer according to one's specific needs.
The following components are available when building a computer:
1. The casing: metal casing which houses the internal components of the
computer. The casing usually comes with its own power supply and a
set of screws, connectors and cables.
2. The motherboard: a large printed circuit board used to connect the
processor, RAM, hard drives and CD/DVD drives, and comes with its
own set of riser connectors.
3. The processor: the computer's main integrated circuit, the true brain
of the computer, performing all the main calculations.
4. RAM modules.
5. Storage devices such as hard drives, CD-ROM and DVD-ROM drives
and burners, and the floppy disk drive.
6. Expansion cards are used to upgrade computer functionality and
performance.
7. The motherboard is the main card, in the form of a large printed circuit
board with connectors for the processor, RAM modules and expansion
cards.
OHS or Organized Health Safety:
White Green, Blue, White Blue, Green, White Brown and Brown and after
aligning them and making them not go to the other direction I pulled some
force and pulled it up using my hands for it to tighten and after it was done I
cut of the wires to make them equal in height so that I can plug it to the
RJ45 head easily so I got my RJ45 head ready and after that I plugged in the
color coded wires inside the head and carefully checked them to make sure
they are aligned properly and after that I got the Crimping tool and plugged
in the RJ45 to the Crimping tool and firmly pushed the crimping tool to give
the gold pins to have in contact with the wires so it would work and after it is
done I repeated the procedure to the other side and when it is done I
plugged them both to a LAN tester and turned it on to see if it is correct and
when it is correct I plugged it in from the computer to the network hub, next I
set up the PC with the name that the instructions gave me and after that I
waited for it to load the desktop and when it loaded to the desktop I ejected
the Installation DVD and replaced it with the Drivers CD and installed them
one at a time after that I installed the rest of the programs and I opened
Word and typed in the words from the Instruction paper and after that I
opened Network and clicked the PC that is connected to the Printer and
double clicked the printer from the other computer and after it is connected I
switched to Word and started it to Print and after that the contest is
complete.