Documentos de Académico
Documentos de Profesional
Documentos de Cultura
FEATURES
RECOMMENDED USES
METALLIC
STRUCTURES
The ES301 final scheme
adhesion is maximized and
after cutting and after
welding surface preparation
needs are decreased (when
ES301 is to be used).
Specification Data
Binder Type / Pigment Type
Colors
Finish
Mate
Mixing ratio
Curing agent
CA48.
30 % (Theoretical).
Pot Life
Base: > -4C (> 25F); Curing Agent: > -18C (> 39.2F).
Application method
Thinner
>340 grams/Lt.
Drying time
Surface dry: 3 to 5 minutes (at 23C (73.4F) and 50% relative humidity).
Overcoating time
Recommended primers
Not applicable.
Ambient temperature
Substrate temperature
Packing
Product is a two pack component, available in 1L, 5L, 20L combined packs.
The product must be stored in accordance with national regulations. The product
should be kept in a cool well ventilated places protected from high temperatures
Containers MUST BE kept tightly closed. Shelf life: 1 year
Approvals
Euronavy Laboratory
Application guide
SURFACE PREPARATION
EURO-shop PE31, is designed for application directly to iron/steel surfaces pre-treated by Blast cleaning to Sa 2,5 of the Swedish
Standard SIS 055900.
EURO-shop PE31, is designed for application over surfaces free of grease, dry spray, dust, moisture and other foreign matters.
APPLICATION
EURO-shop PE31, can be applied by airless and conventional spray.
Airless application: nozzle: 12 21 thous; pressure: 140 210 bar.
Ventilation
It is very important for the safety of the applicator that good ventilation be provided to all portions of the application area.
SAFETY
WARNING: Cause eye and skin irritation. Vapours may cause respiratory irritation in sensitive individuals. May cause allergic skin
reaction. Avoid breathing vapours. Do not get in eyes on skin or clothing. ear eye and skin protective equipment. Use appropriate
respirator, it is recommended to avoid potential respiratory irritation. Wash skin thoroughly after use and water. Call a physician.
Launder clothing before reuse. If not breathing give artificial respiration, preferably mouth-to-mouth, and call physician.
FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated
clothing and shoes. Wash skin contact area with soap.
DISCLAIMER: This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the
product formula, unless otherwise mentioned, and can deviate from laboratory measurements using standard methods that may be not applicable,
giving the nature of the products. If requested, Euronavy can inform any internal measurement method used to determinate any given value presented.
This Technical Data Sheet content can be changed without previous notice. Since conditions of use are beyond the manufacturers control information
contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use
contemplated, the manner of use and whether there is any infringement of patents is the sole responsibility of user. The product is intended for
professional use only. Manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or
injury. For application in special conditions please consult Euronavy for detailed recommendations.