Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so calledTAIYO YUDEN
s official sales channel).
It is only applicable to the products purchased from any of TAIYO YUDENs official sales channel.
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
Caution for export
Certain items in this catalog may require specific procedures for export according toForeign Exchange and Foreign Trade Control Lawof Japan,U.S. Export Administration Regulations, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
12
notice_e-01
FEATURES
APPLICATIONS
UMTSW-CDMA
High Attenuation
GSM
CDMA
LTE
Environmentally Conscions
GPS
O ther
ORDERING CODE
A
Previous Rule (applied to products registered on March 31, 2010 or before.)
F A R D 6 N F 1 G 9 6 0 0 P 1 B Z Z
Family
D5
D6
J5
F5
F6
G5
G6
Common sign
Fixation
Package type
Frequency
Product type
Series
Product
Frequency Range
700-1000MHz
Duplexer
Duplexer
1000-5000MHz
700-1000MHz
Dual Duplexer
Filter
700-1000MHz
Filter
1000-5000MHz
700-1000MHz
Dual Filter
Dual Filter
1000-5000MHz
Common sign
Fixation
Common sign
Fixation
Serial Number
Design
Custom, Status
Packing
B
New Rule (applied to products registered on April 1, 2010 or later.)
D 6 N F 1 G 9 6 0 P 1 B Z Z _ S
D5
D6
J5
F5
F6
G5
G6
Series
Product
Frequency Range
700-1000MHz
Duplexer
Duplexer
1000-5000MHz
700-1000MHz
Dual Duplexer
Filter
700-1000MHz
Filter
1000-5000MHz
700-1000MHz
Dual Filter
Dual Filter
1000-5000MHz
Package type
Frequency
Design
Serial Number
Product type
Packing
Custom
Custom, Status
Status, JIG
MP
ES
Nothing
S
2.52.00.6
9pin
0.6max
2.50.1
2.52.00.65
0.6max
2.50.1
2.00.1
2.00.1
index
C0.15
4-0.7375
0.90.375
4-0.7375
index
4-0.9625 2-0.3
Unitmm
4-0.775
0.90.375
4-0.7375
C0.15
C0.15
8-0.375
8-0.425
Unitmm
2-0.325
0.600.30
4-0.575
C0.15
8-0.375
8-0.425
1.60.1
index
4-0.9625 2-0.3
8-0.375
0.5max
2.00.1
2.00.1
index
4-0.9625
2.01.60.5
0.65max
2.50.1
8-0.30
8-0.425
Unitmm
8-0.30
Unitmm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
184
12
sawfilter01_e-01
1.41.00.5
1.400.1
1.10.90.5
1.400.1
0.900.1
0.50
0.40
0.25
index
1.41
0.40
0.25
0.5
Unitmm
0.25
0.25
0.575
0.60
0.325
1.17
0.47
0.20
0.325
1.100.1
index
index
0.50
0.5max
1.500.1
0.5max
1.000.1
index
1.51.10.5
0.5max
1.800.1
1.100.1
0.5max
1.81.40.5
1.00
0.25
0.2
0.25
0.25
0.25
Unitmm
0.39
0.60
0.39
0.78
0.25
0.24 0.23
0.49
0.18
0.18
Unitmm
0.21
0.18 0.21
Unitmm
2G Frequency Allocation
GSM
GSM Band
850
900
1800
1900
Region
US
CN/EU
CN/EU
US
Use
GPRS, EDGE
GPRS, EDGE
GPRS, EDGE
GPRS, EDGE
Tx
MHz
824-849
880-915
1710-1785
1850-1910
Rx
MHz
869-894
925-960
1805-1880
1930-1990
13
9
0-3
NameBlock
2G
1.9G
1800
850
800
2.5G
900
1.7G
1.5G
Lower 700A,B,C
Upper 700C
Upper 700D
Lower 700B,C
New 800
Extended 800
Extended 1.5G
Region
EU, JP, CN
US
EU
US
US
JP
EU
EU
JP
US
JP
US
US
US
US
JP
JP
EU
JP
UseStatus
W-CDMA
W-CDMA
LTE
W-CDMA
W-CDMA
W-CDMA
LTE
W-CDMA
W-CDMA
W-CDMA
W-CDMA/LTE
LTE
LTE
LTE
LTE
CDMA2000 or LTE
W-CDMA or LTE
LTE
LTE
Tx
MHz
1920-1980
1850-1910
1710-1785
1710-1755
824-849
830-840
2500-2570
880-915
1750-1785
1710-1770
1427.9-1452.9
1427.9-1447.9
698-716
777-787
788-798
1900-1920
2010-2025
704-716
815-830
830-845
832-862
1447.9-1462.9
Rx
MHz
2110-2170
1930-1990
1805-1880
2110-2155
869-894
875-885
2620-2690
925-960
1845-1880
2110-2170
1475.9-1500.91475.9-1495.9
728-746
746-756
758-768
2600-2620
2585-2600
734-746
860-875
875-890
791-821
1495.9-1510.9
Name
Region
UseStatus
Tx
MHz
1900-1920
2010-2025
1850-1910
1930-1990
1910-1930
2570-2620
1880-1920
2300-2400
Rx
MHz
1900-1920
2010-2025
1850-1910
1930-1990
1910-1930
2570-2620
1880-1920
2300-2400
3G Frequency Allocation
3GPP/FDD
W-CDMA/LTE
3GPP Band
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
XX
XXI
Name
GSM850
EGSM
DCS
GSM1900
3GPP Band
V
VIII
III
II
3GPP/TDD
3GPP Band
33
34
35
36
37
38
39
40
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
12
185
3G Frequency Allocation
3GPP2
CDMA2000
3GPP2 Band Class 3GPP Band
0
V
0-2
V
0-3
1
II
2
6
I
7
8
III
9
VIII
10
11
12
13
VII
14
II
15
IV
Name
CDMA
J-CDMA6MHz
J-CDMAPlan
PCS
J-CDMA27MHz
K-PCS
CDMA450
J-CDMAIMT
Secondary
PCSG-Band
AWS
Region
US, CN, KR
JP
JP
US
JP
KR
EU
JP
US
US
US
Use
CDMA2000
CDMA2000
CDMA2000 or LTE
CDMA2000
CDMA2000
CDMA2000
CDMA2000
CDMA2000
CDMA2000
CDMA2000
CDMA2000
Tx
MHz
824-849
824-830
815-824
1850-1910
872-909, 880-915
887-925
1750-1780
452-484
1920-1980
776-794
1710-1785
880-915
817-824
452-484
870-876
2500-2570
1850-1915
1710-1755
Rx
MHz
869-894
869-875
860-869
1930-1990
917-954, 925-960
832-870
1840-1870
462-494
2110-2170
746-764
1805-1880
925-960
862-869
462-494
915-921
2620-2690
1930-1995
2110-2155
Name
2G
1.9G
CORE XGP
Region
CN
CN
JP
Use
TD-SCDMA
TD-SCDMA
PHS
Tx
MHz
2010-2025
1880-1920
2545-2575
Rx
MHz
2010-2025
1880-1920
2545-2575
TD-SCDMA, PHS
3GPP Band
OTHERS
Wireless LAN, Bluetooth, GPS
System
Wireless LAN
Wireless LAN
Bluetooth
GPS
Name
Block
IEEE 802.11
IEEE 802.11a
IEEE 802.15.1
Frequency
MHz
2400-2483.5
5150-5350
2400-2483.5
1574.42-1576.42
PART NUMBERS
Duplexers
System
W-CDMA I2G
CDMA/W-CDMA V850
J-CDMABW:27MHz
W-CDMA VIII900
PCS/W-CDMA II1.9G
W-CDMA IVDCS/2G
LTE XIIIUpper C
LTE XVIILower B,C
CDMA BC0+BC10
Part number
FAR-D6JG-2G1400-D3FZ
FAR-D6JH-2G1400-B1BT
D6PE2G140P3AW
FAR-D5NG-881M50-M11Z
FAR-D5PF-881M50-M3E7
FAR-D5NE-881M50-P1A9
FAR-D5NE-881M50-P1A6Q
FAR-D5PE-881M50-P3EZ
FAR-D5PE-881M50-P3EY
FAR-D5PF-911M50-M3J7
FAR-D5NH-942M50-M1Y9
FAR-D5NF-942M50-P1GZ
FAR-D5NF-942M50-P1GWQ
D5NE942M5P1G9
D5PE942M5P3GT
FAR-D6NH-1G9600-M1Z9
FAR-D6NH-1G9600-M1Z6
D6HK1G960DK12
FAR-D6NF-1G9600-P1BT
D6NF1G960P1BR
D6HH1G960BH95
D6HH1G960BH97
FAR-D6JH-2G1325-B1YZ
D6JG2G132D3GZ
D6PE2G132P3DW
D5NE782M0P1D6
D5NG782M0M15Z
FAR-D5NE-740M00-P1C9
D5NG740M0M14Z
D5NF878M0P1ET
Package Size
mm
2.52.00.65
2.52.00.65
2.01.60.5
2.52.00.6
2.01.60.5
2.52.00.6
2.52.00.6
2.01.60.5
2.01.60.5
2.01.60.5
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.6
2.01.60.5
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.52.00.65
2.01.60.5
2.52.00.6
2.52.00.6
2.52.00.6
2.52.00.6
2.52.00.65
Insertion Loss
dB
1.4/1.7
1.4/1.7
1.5/1.6
1.45/1.8
1.5/1.8
1.6/1.8
1.6/1.7
1.4/1.7
1.4/1.7
1.5/1.8
1.8/2.3
1.9/2.3
1.9/2.3
1.7/2.0
1.7/2.2
2.2/3.1
2.3/2.7
2.0/2.3
2.5/2.8
2.5/3.4
2.3/2.5
2.6/2.5
1.5/1.7
1.6/1.9
1.9/1.8
2.2/2.2
2.1/2.7
1.7/2.0
1.6/1.7
1.9/2.5
IsolationdB
Remarks
54/47
58/48
59/47
66/52
58/51
57/51
60/53
59/52
59/52
61/44
58/50
58/50
59/54
60/53
58/54
55/50
55/53
58/52
54/55
56/53
56/53
59/59
57/51
53/52
55/47
60/55
62/57
61/58
62/56
58/50
9 Pin, B Type
9 Pin, B Type Rx : Bal.100ohm STD
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type New
9 Pin, A Type
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type 100ohm, New
9 Pin, B Type Rx : Bal.100ohm
9 Pin, A Type Rx : Bal.100ohm
9 Pin, A Type
9 Pin, B Type
9 Pin, B Type 100ohm, STD
9 Pin, B Type 100ohm, GPS High Att.
9 Pin, B Type 100ohm
9 Pin, B Type 100ohm
9 Pin, B Type
9 Pin, B Type Low Rx IL
9 Pin, B Type
9 Pin, B Type 100ohm, Low Rx IL
9 Pin, B Type 100ohm High GPS Att. & Rx Isol.
9 Pin, B Type 100ohm, STD
9 Pin, B Type 100ohm High GPS Att. & Rx Isol.
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
9 Pin, B Type Rx : Bal.100ohm
9 Pin, B Type
9 Pin B Type Rx : Bal.100ohm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
186
12
sawfilter01_e-01
PART NUMBERS
CDMA/GSM850
System
CDMA Tx
CDMA/GSM850 Tx
CDMA Rx
GSM850/CDMA Rx
GSM850 Rx
Part number
FAR-F5KB-836M50-B4ER
FAR-F5KB-836M50-B4EG
F5QA836M5M2AB
FAR-F5KA-836M50-D4DF
FAR-F5KB-881M50-B4ED
FAR-F5KY-881M50-B4UZ
FAR-F5KB-881M50-B4EJ
F5QG881M5P2KG
FAR-F5KA-881M50-D4DB
FAR-F5QA-881M50-M2AF
FAR-F5KB-881M50-B4EA
FAR-F5QB-881M50-P2BA
Package Size
mm
1.41.00.5
1.41.00.5
1.10.90.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
1.41.00.5
1.10.90.5
1.41.00.5
1.10.90.5
Insertion Loss
dB
1.7
1.6
1.6
1.9
1.5
1.5
1.4
1.5
1.7
1.6
1.7
1.3
Attenuation
dB
44
42
34
44
61
61
64
56
56
46
53
63
Package Size
mm
1.41.00.5
1.10.90.5
1.41.00.5
1.10.90.5
1.41.00.5
1.10.90.5
1.1x0.9x0.5
Insertion Loss
dB
2.2
2.3
2.0
2.2
1.6
1.6
2.2
Attenuation
dB
16
18
34
40
26
28
56
Package Size
mm
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
Insertion Loss
dB
2.5
2.1
1.5
1.6
Attenuation
dB
30
20
14
17
Package Size
mm
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
Insertion Loss
dB
2.4
2.3
2.4
3.4
3.4
2.1
2.6
2.8
2.0
1.8
1.6
1.5
Attenuation
dB
35
28
42
44
43
23
50
50
18
18
18
15
Package Size
mm
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
1.51.10.5
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
1.51.10.5
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
1.51.10.5
1.81.40.5
1.51.10.5
1.51.10.5
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
1.81.40.5
1.51.10.5
Insertion Loss
dB
1.8/1.6
1.6/1.6
1.6/1.8
1.6/1.6
1.5/1.8
1.9/2.2
1.9/2.2
1.8/1.4
1.7/1.4
1.7/2.3
2.2/1.9
2.5/2.0
2.3/1.8
2.4/1.9
1.9/1.7
1.9/1.6
1.7/1.7
1.6/1.2
1.9/1.8
1.9/1.8
1.9/1.8
1.9/1.8
2.5/2.5
2.5/2.5
1.6/1.5
1.6/1.4
Attenuation
dB
31/16
31/17
16/31
17/31
50/29
50/25
48/26
31/54
29/51
52/37
25/52
25/55
35/40
32/37
17/13
14/16
15/16
13/15
13/18
15/18
13/18
15/18
20/12
18/13
15/58
14/54
Remarks
100ohm input
200ohm input
150ohm output
150ohm output
EGSM
System
EGSM Tx
FAR-F5KA-897M50-D4DC
FAR-F5QA-897M50-M2AC
FAR-F5KA-942M50-D4DD
F5QA942M5M2AG
FAR-F5KB-942M50-B4EB
FAR-F5QB-942M50-P2BB
FAR-F5QG-942M50-P2KB
Remarks
High Att. type
150ohm output
150ohm output
100ohm, High Att.
DCS
System
Part number
DCS Tx
FAR-F6KA-1G7475-D4CY
FAR-F6KA-1G8425-D4CK
FAR-F6KB-1G8425-B4GA
FAR-F6QB-1G8425-P2BF
DCS Rx
Remarks
150ohm output
150ohm output
US-PCS/GSM1900
System
US-PCS Tx
US-PCS Rx
GSM1900/US-PCS Rx
GSM1900 Rx
Part number
FAR-F6KA-1G8800-L4AF
FAR-F6KB-1G8800-B4GS
F6KB1G880B4GH
FAR-F6KA-1G9600-D4DQ
FAR-F6KA-1G9600-D4MT
FAR-F6KB-1G9600-B4GP
FAR-F6KY-1G9600-B4UU
F6KY1G960B4NF
FAR-F6KA-1G9600-D4CR
F6KA1G960D4CZ
FAR-F6KB-1G9600-B4GB
F6QB1G960P2BK
Remarks
Full band, High Att.
100ohm input
200ohm input
High Att.
High Att./New
100ohm output
100ohm, High Att.
100ohm output
EGSM Rx
Part number
GSM Dual
System
EGSMDCS Rx
DCSEGSM Rx
GSM850EGSM Rx
GSM850EGSM Rx
Common Input
EGSMGSM850 Rx
EGSMGSM850 Rx
Common Input
EGSMGSM850 Rx
Common Output
DCSGSM1900 Rx
GSM1900DCS Rx
GSM1900DCS Rx
Common Input
DCS+ GSM1900 Rx
(Common Input)
GSM1900DCS Rx
Common Output
GSM1900850 Rx
Part number
FAR-G6KZ-1G8425-Y4WZ
G6QF1G842N2HA
FAR-G6KZ-1G8425-Y4WY
G6QF1G842N2GC
FAR-G5QC-942M50-N2FB
FAR-G5KT-942M50-Y4RW
FAR-G5QD-942M50-N2DZ
FAR-G5KC-942M50-Y4YW
FAR-G5QC-942M50-N2CD
G5QJ942M5M2MA
FAR-G5KT-942M50-Y4RZ
FAR-G5QD-942M50-N2DB
G5KW942M5Y4YF
G5QE942M5N2ED
FAR-G6QC-1G9600-N2FA
FAR-G6KC-1G9600-Y4YY
FAR-G6QC-1G9600-N2CB
G6QC1G960N2CH
FAR-G6KT-1G9600-Y4RY
G6QD1G960N2DA
G6KT1G960Y4RU
G6QD1G960N2DY
G6KW1G960Y4YE
G6QE1G960N2EC
FAR-G6KG-1G9600-Y4ZF
FAR-G6QF-1G9600-N2GA
Remarks
EGSM 150ohm output DCS 150ohm output
EGSM 150ohm output DCS 150ohm output
DCS 150ohm output EGSM 150ohm output
DCS 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
GSM850 150ohm output EGSM 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 50ohm output GSM850 50ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
EGSM 150ohm output GSM850 150ohm output
DCS 150ohm output GSM1900 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
DCS 150ohm output GSM1900 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output DCS 150ohm output
GSM1900 150ohm output GSM850 150ohm output
GSM1900 150ohm output GSM850 150ohm output
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
12
187
PART NUMBERS
GPS
System
GPS
GPSGNSS
Part number
FAR-F6KA-1G5754-L4AA
FAR-F6KA-1G5754-L4AJ
FAR-F6KA-1G5754-L4AB
FAR-F6QA-1G5754-H2JC
F6QA1G575H2JD
F6QA1G575H2JE
FAR-F6KB-1G5754-B4GE
FAR-F6KB-1G5754-B4GU
F6KB1G575B4HQ
FAR-F6KA-1G5859-D4MS
FAR-F6KB-1G5859-B4HR
Package Size
mm
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
1.10.90.5
1.10.90.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
Insertion Loss
dB
0.9
0.9
0.44
1.11
0.87
1.27
1.1
1.2
1.1
1.0
1.2
1.1
1.4
Attenuation
dB
Package Size
mm
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.10.90.5
1.5x1.1x0.5
1.5x1.1x0.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.51.10.5
1.41.00.5
1.41.00.5
1.41.00.5
1.81.40.5
1.81.40.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
Insertion Loss
dB
2.2
1.6
2.1
1.8
1.9
1.9
1.7
1.8
1.7
1.9/3.0
2.0/3.2
1.4
1.5
2.6
1.6
1.9
2.4
2.0
1.6/2.0
1.8
1.8
2.1
1.9/2.4
1.6/1.5
1.5
1.6
1.2
1.4
1.7
2.6
2.7
Attenuation
dB
36
38
34
38
39
48
39
64
55
48/41
53/42
48
44
38
20
53
29
57
56/50
31
40
40
42/43
42/64
55
50
32
60
52
38
37
Package Size
mm
1.10.90.5
1.41.00.5
1.41.00.5
1.41.00.5
1.51.10.5
1.51.10.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
1.41.00.5
Insertion Loss
dB
1.8
1.8
1.6
1.4
1.3/1.4
1.6/2.0
2.6
3.0
1.9
2.5
1.9
2.4
2.8
Attenuation
dB
40
47
35
36
40
Remarks
Low loss type
Low loss, High Att.
Ultra Low loss type
High Att.
Low loss type
High Att.
100ohm, Low loss
100ohm, High Att.
100ohm, High Att.
100ohm output
W-CDMA
System
W-CDMA I2GTx
W-CDMA I2GRx
1900Rx
I
+II
W-CDMA2G
J-CDMA2G/B.W.20MHzRx
W-CDMA IV1.7G/2GTx
W-CDMA VIIIEGSMTx
W-CDMA VIIIEGSMRx
W-CDMA V (850)+ VIII(900) Rx
W-CDMA IX1.7GTx
W-CDMA IX1.7GRx
W-CDMA V850 I2GTx
W-CDMA I2G V850Rx
LTE XIIIUpper CTx
LTE XIIIUpper CRx
LTE XVIILower B,CTx
LTE XVIILower B,CRx
LTE XX
TD LTE XXXVIII Rx
TD LTE XL Rx
Part number
FAR-F6KA-1G9500-D4CD
FAR-F6KA-1G9500-D4DG
FAR-F6KB-1G9500-B4GJ
F6QA1G950M2AA
FAR-F6KA-2G1400-D4CG
F6KA2G140D4DW
FAR-F6KB-2G1400-B4GC
FAR-F6KY-2G1400-B4UY
F6QG2G140P2KA
G6QL2G140M2PA
G6QH2G140N2LA
FAR-F6KB-2G1200-B4GQ
FAR-F6KA-1G7400-D4DE
FAR-F5KA-897M50-D4VW
F5KA897M5D4MH
F5KA942M5D4MYB
FAR-F5KB-942M50-B4ES
FAR-F5KY-942M50-B4UW
G5QH942M5N2LN
FAR-F6KA-1G7675-D4CT
FAR-F6KA-1G8625-D4DH
FAR-F6KB-1G8625-B4GT
FAR-G6KG-1G9500-Y4PG
FAR-G6KG-2G1400-Y4SH
FAR-F5KA-782M00-D4VP
FAR-F5KY-751M00-B4UQ
FAR-F5KA-710M00-D4VQ
FAR-F5KY-740M00-B4UR
F5KA847M0D4ML
F6KB2G595B4HS
F6KB2G350B4HT
Remarks
Low loss, High Att.
100ohm input
Low loss, High Att.
High Att.
100ohm output
100ohm, High Att.
100ohm, High Att.
100ohm output
100ohm output
High Att.
Low Loss
High Att.
100ohm output
100ohm, High Att.
100ohm output
100ohm output
V850200ohm in I2G200ohm in
I2G200ohm out V850200ohm out
100ohm output
100ohm output
150ohm output
150ohm output
Other
System
Part number
ISM900B.W.26MHz
FAR-F5QA-915M00-M2AK
FAR-F6KA-2G0175-D4DR
FAR-F6KA-1G9000-D4DS
FAR-F6KA-1G9000-D4MZ
FAR-G6QJ-2G0175-M2MD
G6QJ2G017M2RD
FAR-F6KA-2G4418-D4CU
FAR-F6KA-2G4418-A4VA
FAR-F6KA-2G4500-A4VD
F6KA2G436A4VE
F6KA2G450A4VF
F6KA2G441A4VG
F6KA2G466A4VJ
TD-SCDMA
TD-SCDMA2G1.9G
TD-SCDMA (1.9G+2G)
Wireless LAN
Remarks
High Att
Low IL
2 IN/2 OUT
1 IN/2 OUT
10dBm
23dBm
Low IL,+19dBm
BW=72MHz,+24dBm
BW=100MHz,+24dBm , Low loss
BW=83.5MHz,+24dBm
BW=68MHz,+24dBm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
188
12
sawfilter01_e-01
ELECTRICAL CHARACTERISTICS
FAR-D5NF-942M50-P1GWQ
Attenuation[dB]
0.0
Mk1: 882.4MHz
S21= 1.869dB
20.0
Mk2: 912.6MHz
S21= 1.895dB
30.0
Mk3: 927.4MHz
S21= 61.812dB
40.0
Mk4: 957.6MHz
S21= 54.141dB
50.0
60.0
4
3
70.0
10.0
Attenuation[dB]
80.0
Tx to Ant, Ant to Rx
0.0
20.0
2.0
30.0
Mk3: 882.4MHz
S32= 64.673dB
3.0
40.0
Mk4: 912.6MHz
S32= 63.538dB
50.0
60.0
70.0
90.0
4.0
Tx to Rx Isolation
0.0
Mk2: 912.6MHz
S21= 1.895dB
S32= 63.538dB
Mk3: 925.0MHz
S21= 68.590dB
S32= 2.815dB
5.0
Mk4: 960.0MHz
S21= 54.051dB
S32= 2.348dB
6.0
7.0
8.0
90.0
Frequency[MHz]
10.0
Mk1: 882.4MHz
S31= 81.875dB
20.0
Mk2: 912.6MHz
S31= 65.043dB
30.0
Mk3: 927.4MHz
S31= 67.022dB
40.0
60.0
70.0
90.0
10.0
870 880 890 900 910 920 930 940 950 960 970
Frequency[MHz]
2 3
1
100.0
820 840 860 860 900 920 940 960 980 1000 1020
Frequency[MHz]
Pass-bandAnt to Rx
Mk4: 957.6MHz
S31= 54.321dB
50.0
80.0
9.0
100.0
820 840 860 860 900 920 940 960 980 1000 1020
Pass-bandTx to Ant
Mk1: 882.4MHz
S21= 1.869dB
S32= 64.673dB
1.0
Mk2: 960.0MHz
S32= 2.348dB
80.0
100.0
820 840 860 860 900 920 940 960 980 1000 1020
Frequency[MHz]
In-band Characteristic
Tx to Rx Isolation
These date include loss that comes from the test board.Approximately 0.05dB
Mk1: 897.5MHz
S21= 1.482dB
20.0
Mk2: 1575.0MHz
S21= 48.665dB
20.0
30.0
Mk3: 1830.0MHz
S21= 52.034dB
30.0
40.0
Mk4: 2500.0MHz
S21= 39.380dB
45
50.0
60.0
Mk5: 2745.0MHz
S21= 37.117dB
70.0
80.0
Mk2: 1045.0MHz
S32= 56.269dB
Mk3: 1750.0MHz
S32= 60.796dB
40.0
60.0
Mk4: 4810.0MHz
S32= 34.991dB
50.0
2
70.0
80.0
90.0
100.0
Mk1: 942.5MHz
S32= 1.916dB
90.0
100.0
0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000
0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000
Frequency[MHz]
Frequency[MHz]
Wide-bandTx to Ant
Wide-bandAnt to Rx
FAR-F6KY-2G1400-B4UY
Mk1: 2110.0MHz
S21= 1.624dB
2.0
Mk2: 2170.0MHz
S21= 1.615dB
30.0
Mk3: 1920.0MHz
S21= 67.953dB
3.0
40.0
Mk4: 1980.0MHz
S21= 73.634dB
50.0
Mk5: 2200.0MHz
S21= 51.021dB
60.0
70.0
3
4
90.0
100.0
1840 1900 1960 2020 2080 2140 2200 2260 2320 2380 2440
4.0
5.0
6.0
0.0
Mk1: 2110.0MHz
VSWR1= 1.542
10.0
Mk1: 2110.0MHz
VSWR2= 1.564
9.0
Mk2: 2170.0MHz
VSWR1= 1.551
9.0
Mk2: 2170.0MHz
VSWR2= 1.525
8.0
8.0
7.0
7.0
6.0
6.0
5.0
5.0
4.0
4.0
8.0
3.0
3.0
9.0
2.0
2.0
Frequency[MHz]
Pass-band Characteristic
11.0
10.0
7.0
10.0
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
Frequency[MHz]
In-band Characteristic
1.0
1
2
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
1.0
1
2
2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200
Frequency[MHz]
Frequency[MHz]
VSWR
INPUT
VSWR
OUTPUT
Mk1: 2140.0MHz
S21= 1.303dB
10.0
11.0
VSWR
Attenuation[dB]
Attenuation[dB]
1.0
Mk2: 2170.0MHz
S21= 1.615dB
80.0
Attenuation[dB]
0.0
Mk1: 2110.0MHz
S21= 1.624dB
VSWR
0.0
20.0
10.0
Attenuation[dB]
Attenuation[dB]
Mk1: 925.0MHz
S32= 2.815dB
Attenuation[dB]
Ant to Rx
0.0
10.0
Attenuation[dB]
Tx to Ant
20.0
Mk2: 925.0MHz
S21= 61.972dB
30.0
Mk3: 1950.0MHz
S21= 69.270dB
40.0
Mk4: 2500.0MHz
S21= 54.864dB
50.0
60.0
Mk5: 6000.0MHz
S21= 45.717dB
70.0
80.0
90.0
100.0
600 1200 1800 2400 3000 3600 4200 4800 5400 6000
Frequency[MHz]
Wide-band Characteristic
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfilter01_e-01
12
189
PACKAGING
Reel size
Minimum Quantity
Size
Type
mm
3.02.5
Duplexer 2.52.0
2.01.6
2.01.6
Single
1.41.0
Filter
1.10.9
2.01.6
Dual
1.81.4
Filter
1.51.1
Code&Quantity
Pieces
Z
Z
Z
Z
Z
3000
3000
3000
3000
3000
Z
Z
3000
3000
U
U
5000
5000
10000
10000
Y
Y
Y
Y
Y
Y
Y
15000
15000
15000
15000
15000
15000
15000
W1
Tape material
W2
1.75/0.1
2.00/0.05
component fixed area
Blank portions
8.0/0.2
Blank portions
Material of Reel
Material : PolystyreneCarbon
Characteristics : Conform to EIAJ-ET-7200A
Color : Black
Surface resistance
reference value:109/sq Max.
3.50/0.05
4.0/0.1
a
c
400mm or more e
15.7inch or more
4.0/0.1
240mm min
Unitmm
Direction of tape feed
Code
Quantity
W1
W2
3,000 pcs
66.0 0.5
13.0 0.2
11.4 1.0
J
U
5,000 pcs
10,000 pcs
66.0 0.5
100.0 1.0
13.0 0.2
13.0 0.2
11.4 1.0
13.4 1.0
15,000 pcs
330.0 2.0
100.0 1.0
13.0 0.2
9.4 1.0
13.4 1.0
Unitmm
Taping dimensions
Size
mm
3.02.5
Duplexer
2.52.0
2.01.6
2.01.6
Single
1.41.0
Filter
1.10.9
2.01.6
Dual Filter 1.81.4
1.51.1
Type
3.40.1
2.80.1
2.40.1
2.40.1
1.70.1
1.30.1
2.40.1
2.20.1
1.80.1
2.850.1
2.30.1
2.00.1
2.00.1
1.30.1
1.10.1
2.0
1.8
1.4
1.050.05
1.5+0.1/0
1.050.05
1.050.05
0.50.05
0.50.05
1.050.05
0.50.05
0.50.05
1.550.05
1.00.1
0.250.05
1.5+0.1/0 1.0+0.1/0.0 0.250.05
1.5+0.1/0 0.90 0.05 0.250.05
1.5+0.1/0 0.90 0.05 0.250.05
1.5+0.1/0 0.630.05 0.200.05
1.550.05 0.630.05 0.200.05
1.5+0.1/0 0.90 0.05 0.250.05
1.550.05
0.80.1
0.300.05
1.5+0.1/0
0.70.1
0.250.05
Reel Label
Unitmm
Material of Tape
Conductive
Tape : Polystyrene
Top cover tape : Polyethylene terephthalate
PET
and Polyethylene
Reel C-Label
Reel side
015
Leading Edge
Tape
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli-PRP1
12
sawfil_reli_e-01
RELIABILITY DATA
Filter
1. Terminal stregth
Specifications
Conditions
No damage to be found.
Bending Test.
according to IEC60068-2-21(JISC60068-2-21)
340
Board
1.60.20
Solder
452
2. Mechanical shock
Specifications
Conditions
Device
452
3. Vibration
Specifications
Conditions
4. Drop 1
Specifications
Conditions
5. Drop 2
Specifications
Conditions
6. Temperature cycling
Specifications
Conditions
. Static humidity
Specifications
Conditions
10. Solderbility 1
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Lead-free Solder paste, ReflowPeak temperature 245
Specifications
Conditions
11. Solderbility 2
Specifications
Conditions
12. Solder heat resistance
Specifications
Conditions
Recommended temperature profile of reflow soldering
Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
Suitable condition for solder heating is differed depending on composition and manufacturing method.
Please contact to solder manufacturer for the details.
Temperature
Ambient temperature
300
250
200
3050sec.
Temperature in heat condition
: 230min. 50sec. max.
Temperature of upper surface of package
and PCB surface.
: 260min. 10sec. max.
rise slope
: 1~4/sec.
Pre-Heating
150~180
150
Ambient temperature
cool slope
: 1~4/sec.
100
50
50~110sec.
10sec.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli-PRP2
12
sawfil_reli_e-01
RELIABILITY DATA
Duplexer
1. Terminal stregth
Specifications
Conditions
No damage to be found.
Bend width 4mm, hold for 5/1 sec.
according to IEC60068-2-21(JISC60068-2-21)
340
Board
1.60.20
Solder
452
2. Mechanical shock
Specifications
Conditions
Device
452
3. Vibration
Specifications
Conditions
4. Drop 1
Specifications
Conditions
5. Drop 2
Specifications
Conditions
6. Temperature cycling
Specifications
Conditions
. Static humidity
Specifications
Conditions
11. Solderbility 1
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Lead-free Solder paste, ReflowPeak temperature 245
Specifications
Conditions
12. Solderbility 2
Specifications
Conditions
13. Solder heat resistance
Specifications
Conditions
Recommended temperature profile of reflow soldering
Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
Suitable condition for solder heating is differed depending on composition and manufacturing method.
Please contact to solder manufacturer for the details.
Temperature
Ambient temperature
300
250
200
3050sec.
Temperature in heat condition
: 230min. 50sec. max.
Temperature of upper surface of package
and PCB surface.
: 260min. 10sec. max.
rise slope
: 1~4/sec.
Pre-Heating
150~180
150
Ambient temperature
cool slope
: 1~4/sec.
100
50
50~110sec.
10sec.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
sawfil_reli_e-01
12
sawfil_reli-PRP3