Está en la página 1de 100

Catalogo de

Productos
2016

EXTINTOR PORTATIL 1 KILO PQS


ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 1 kilo presin interna.
Polvo Qumico Seco multipropsito al 40% (Fosfato Monoamonico).
Certificado Cesmec.
Para el combate de fuegos clase ABC.
Rating apague de 1 A: 2 B: C.

EXTINTOR PORTATIL 2 KILO PQS

ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 2 kilos presin interna.
Polvo Qumico Seco multipropsito al 40%.
Certificado Cesmec.
Para el combate de fuegos clase ABC.
Rating de apague de 2 A: 5 B C.
Incluye soporte.

EXTINTOR PORTATIL 4 KILO PQS


ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 4 kilos
presin interna.
Polvo Qumico Seco multipropsito al 40%.
Certificado Cesmec.
Para el combate de fuegos clase ABC.
Rating de apague de 6 A: 30 B C.
Incluye soporte.

EXTINTOR PORTATIL 6 KILO PQS


ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 6 kilos presin interna.
Polvo Qumico Seco multipropsito al 40%.
Certificado Cesmec.
Para el combate de fuegos clase ABC.
Rating de apague de 10 A: 40 B C.
Incluye soporte.

EXTINTOR PORTATIL 10 KILO PQS

ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 10 kilos presin interna.
Polvo Qumico Seco multipropsito al 40%.
Certificado Cesmec.
Para el combate de fuegos clase ABC.
Rating de apague de 10 A: 40 B C.
Incluye soporte.

repuestos de extintores PQS y CO2

Mangueras PQS de 4 a10 kg :


Mangueras CO2 de 5 kg:
Toberas Co2 de 2 kg:
Abrazaderas:
manometros:
valvulas:

EXTINTOR PORTATIL 2 KILOS DIOXIDO DE CARBONO ( CO2 )


ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 2 kilos
Procedencia RPC
Dixido de Carbono (CO)
Certificado Cesmec
Para el combate de fuegos clase BC
Rating de apague 2 B : C
Incluye soporte

EXTINTOR PORTATIL 5 KILOS DIOXIDO DE CARBONO ( CO2 )


ESPECIFICACIONES TECNICAS:
Extintor porttil capacidad 5 kilos.
Procedencia RPC.
Dixido de Carbono (CO).
Certificado Cesmec.
Para el combate de fuegos clase BC.
Rating de apague 2 B : C.
Incluye soporte.

EXTINTOR PORTATIL ACETATO DE POTASIO 6 LITROS

Los extintores de qumicos hmedos son los mejores extintores porttiles para
cocinas de restaurantes y aprobados por la nueva Clase K enlistada por la UL
especficamente para accidentes de cocinas en restaurantes. Contiene una base
especial de acetato de potasio, un agente de bajo PH desarrollado para el uso en
sistemas de pre-ingeniera de cocinas para restaurantes. La existencia actual de
aparatos de cocina ms complejos y el uso de aceites no saturados, dictan el uso
de extintores porttiles con mayor capacidad para combatir el fuego y el efecto
de enfriamiento para combatir estos difciles y calientes incendios.

EXTINTOR PORTATIL ACETATO DE POTASIO 10 LITROS

Los extintores de qumicos hmedos son los mejores extintores porttiles


para cocinas de restaurantes y aprobados por la nueva Clase K enlistada
por la UL especficamente para accidentes de cocinas en restaurantes.
Contiene una base especial de acetato de potasio, un agente de bajo PH
desarrollado para el uso en sistemas de pre-ingeniera de cocinas para
restaurantes. La existencia actual de aparatos de cocina ms complejos y
el uso de aceites no saturados, dictan el uso de extintores porttiles con
mayor capacidad para combatir el fuego y el efecto de enfriamiento para
combatir estos difciles y calientes incendios.

EXTINTOR PORTATIL ACETATO DE POTASIO 6 LITROS

ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Espuma mecnica


Nombre qumico: AFFF / AR
Contenido porcentual nominal del compuesto activo: 3%
Potencial de extincin: 2-A :10 -B
Contenido nominal : 6 lts
Masa aprox. cargado: 9,2 kg
Masa aprox. Descargado: 3,2 kg

EXTINTOR PORTATIL ACETATO DE POTASIO 10 LITROS


ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Espuma mecnica


Nombre qumico: AFFF / AR
Contenido porcentual nominal del compuesto activo: 3%
Potencial de extincin: 4-A : 20 -B
Contenido nominal : 10 lts
Masa aprox. cargado: 14,2 kg
Masa aprox. Descargado: 4,2 kg

EXTINTOR PORTATIL ACETATO DE POTASIO 6 LITROS

RED LINE cartridge-operated fire extinguishers are the premium


firefighting units preferred by safety directors worldwide in high
fire-risk industries such as chemical, petro-chemical, oil and gas,
mining, aviation, and power generation. Cartridge-operated
means increased reliability, on-the-spot recharge, ease of service, and superior firefighting performance.
Typical applications include fuel loading racks, heavy construction sites, dip tanks, oil pumping stations, mining equipment,
paint lockers, trucks and buses, fuel storage rooms, production
lines and others. Tough, carbon steel shells resist impact, vibration and corrosion; quality components stand up to years of
service; and special polyester powder paints provide superior
protection against cracking and chipping.

Carro Rodante PQS 25 Kg


ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Polvo Qumico Seco


Multipropsito
Nombre qumico: Fosfato mono amnico
Contenido porcentual nominal del compuesto
activo: 90%
Potencial de extincin: 40-A : 60 - B :C
Contenido nominal : 25 kg

Carro Rodante PQS 25 Kg


ESPECIFICACIONES TECNICAS:
Naturaleza del Agente : Polvo Qumico Seco Multipropsito
Nombre qumico: Fosfato mono amnico
Contenido porcentual nominal del compuesto activo: 90%
Potencial de extincin: 40-A : 60 - B :C
Contenido nominal : 25 kg
Masa aprox. cargado: 55,7 kg
Masa aprox. Descargado: 30,7 kg

Carro Rodante PQS 50 Kg


ESPECIFICACIONES TECNICAS:
Naturaleza del Agente :
Polvo Qumico Seco Multipropsito
Nombre qumico: Fosfato mono amnico
Contenido porcentual nominal del compuesto
activo: 90%
Potencial de extincin: 40-A : 80-B:C
Contenido nominal : 50 kg
Masa aprox. cargado: 86,6 kg

Carro Rodante PQS 100 Kg


ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Polvo Qumico Seco Multipropsito


Nombre qumico: Fosfato mono amnico
Contenido porcentual nominal del compuesto activo: 90%
Potencial de extincin: 40 A : 160 B:C
Contenido nominal : 100 kg
Masa aprox. cargado: 147,5 kg
Masa aprox. Descargado: 47,5 kg

Carro Rodante CO2 10 Kg


ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Dixido de Carbono


Nombre qumico: CO2
Contenido porcentual nominal del compuesto activo: 100%
Potencial de extincin: 10-B :C
Contenido nominal : 10 kg
Masa aprox. cargado: 37,5 kg
Masa aprox. Descargado: 27,5 kg

Carro Rodante CO2 25 Kg

ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Dixido de Carbono


Nombre qumico: CO2
Contenido porcentual nominal del compuesto activo: 100%
Potencial de extincin: 20-B :C
Contenido nominal : 25 kg
Masa aprox. cargado: 93 kg
Masa aprox. Descargado: 68 kg

Carro Rodante Espuma 25 Lts


ESPECIFICACIONES TECNICAS:

Naturaleza del Agente : Espuma Mecnica


Nombre qumico: AFFF / AR
Contenido porcentual nominal del compuesto activo: 3%
Potencial de extincin: 10-A : 40-B
Contenido nominal : 25 lts
Masa aprox. cargado: 55,4 kg
Masa aprox. Descargado: 30,4 kg

Carro Rodante Espuma 50 Lts

ESPECIFICACIONES TECNICAS:
Naturaleza del Agente : Espuma Mecnica
Nombre qumico: AFFF / AR
Contenido porcentual nominal del
compuesto activo: 3%
Potencial de extincin: 20-A : 60-B
Contenido nominal : 50 lts
Masa aprox. cargado: 86,3 kg
Masa aprox. Descargado: 36,3 kg

GABINETE DE RED HUMEDA


70X70X30 con carrete de manguera semirgida de 1
de 25 metros con piton incluido de 3 posiciones :
neto $130.000 / iva $24.700 / total $154.700

GABINETE DE RED HUMEDA


70X70X30 con carrete de manguera semirgida de 1
de 30 metros con piton incluido de 3 posiciones :
neto $142.000 / iva $26.980 / total $168.980

GABINETE DE EXTINTOR PQS


Metlico abatible con puerta de vidrio :

Gabinete fabricado con los ms altos estndares de seguridad y Calidad, este


gabinete reforzado esta diseado para dar cuidado a su extintor, resistiendo la
inclemencia del tiempo y la exposicin prolongada. Su diseo lo hace visible y
seguro.
Puerta abatible bisagra pomel con mirilla de inspeccin y terminacin de esmalte termo convertible de color rojo normalizado.

GABINETE DE EXTINTOR PQS


Metlico abatible con LLAVE :

Gabinete fabricado con los ms altos estndares de seguridad y Calidad, este


gabinete reforzado esta diseado para dar cuidado a su extintor, resistiendo la
inclemencia del tiempo y la exposicin prolongada. Su diseo lo hace visible y
seguro.
Puerta abatible bisagra pomel con mirilla de inspeccin y terminacin de esmalte termo convertible de color rojo normalizado. Cierre con llave nica.

GABINETE DE EXTINTOR PQS


Metlico DE QUIEBRE :

Gabinete fabricado con los ms altos estndares de seguridad y Calidad, este


gabinete reforzado esta diseado para dar cuidado a su extintor, resistiendo la
inclemencia del tiempo y la exposicin prolongada. Su diseo lo hace visible y
seguro.
Gabinete fijo de quiebre, incluye martillo de quiebre, soporte y cadena para su
fcil manipulacin. Todo el gabinete tiene una terminacin de esmalte termo
convertible de color rojo normalizado.

GABINETE DE EXTINTOR PQS


Gabinete de policarbonato (CHICO)

GABINETE DE EXTINTOR CO2


Gabinete de policarbonato (GRANDE)

SOPORTE MURAL TIPO L


SOPORTE SIMPLE PARA EXTINTORES DE PQS Y CO2:

SOPORTE MURAL pqs 1KG


mETLICO /PLSTICO /pLSTICO 2 KG

Soporte Metlico para extintor PQS


TIPO ABRAZADERA DE 4 A 10 KG

Soporte reforzado Econmico


para extINTORES Pqs de 4 a 6 kg

Soporte reforzado ROJO TRADICIONAL


para extINTORES Pqs de 6 a 10 kg

Uniones, tuercas. Tapas y traspasos STORZ


VALOR RELATIVO SEGUN LA MEDIDA (CONSULTAR EL REQUERIDO)

UNION Y BIFURCACION DE 3
PARA RED SECA:

PITON NEBLINERO
PARA RED HUMEDa

PITON DE ALUMINIO
TRES POSICIONES

CUBRE VOLANTE
negro con insertos efecto fibra de carbono

FUNDAS CUBRE ASIENTOS


polyester - set para 5 plazas
incluye 4 apoya cabezas

SISTEMA LUZ DIA


conexin positiva (gris) y conexin negativa (morada)

SISTEMA LUZ DIA


Alarma de retroceso 97dB- 12V / 24V / 36V

BOTIQUIN LONCHERO
INCLUYE suministros bsicos ante una emergencia

CHALECO REFLECTANTE
CUMPLE CON TODA LA NORMATIVA

CINTAS REFLECTANTES
COLORES VARIOS

KIT ANTIDERRAMES MARCA 3M


PARA FAENAS MINERAS:
neto $66.000 / iva $12.540 / total $ 78.540

CUAS DE poliuretano ( PU )
cuas para camionetas:
neto $36.000 / iva $6.841 / total $ 42.840

cuas de 20 ton:
neto $42.000 / iva $7.980 / total $ 49.980

cuas de 60 ton:
neto $69.000 / iva $13.110 / total $ 82.110

PORTA CUAS METALICAS


C/U:
neto $11.500 / iva $2.185 / total $ 13.685

PALA ARMABLE
articulada - abierta 24''- cerrada 9,5'':
neto $9.000 / iva $1.710 / total $ 10.710

FOCOS FAENEROS

BALIZAS PARA VEHICULOS MINEROS


BALIZA SYFCO AZUL Y AMBAR

EQUIPO MINERO, OPERACION INVIERNO


SACO YUTE / frasada de polar

CADENAS PARA NIEVE


STANDART

PRTIGAS Y ACCESORIOS
Prtiga Completa de 8 Pies con Led
Prtiga Completa de 10 Pies con Led
Prtiga Completa de 12 Pies con Led
Bandern Prtiga / Ampolleta Led Prtiga
/ Resorte Prtiga

TENSORES PARA CADENAS

Cono Minsafe base negra


18 / 28 / 36

18

28

Estrobos con grilletes


5/8 * 4 metros

TRABATUERCAS
VALOR RELATIVO SEGUN LA MEDIDA
(CONSULTAR EL REQUERIDO):

36

Carrete ataque rpido Con Manguerin


Carrete de manguera semirigida marca AyR Prieto en 1'' por 25
metros con pitn metlico de tres posiciones. Con brazo
abatible en 180 grados. Conexin a red de agua por medio de
manguern. Pintura electro convertible en dos capas de color
rojo. Equipo certificado por IDIEM de la Universidad de Chile
de acuerdo a requerimientos de normativa del RIDDA.
Incluye:
Manguera Semirgida de 1" x largos 25 MT ., fabricada en
caucho sinttico 100 % impermeablePresin de trabajo 225 lbs
Presin de ruptura 710 lbs.
Pitn con patrn de descarga variable, posicin de corte

Carrete ataque rpido Kolling


- Carrete interior importado marca Kolling, procedencia
Malasia, similar modelo Angus MK-II, fabricado en lmina
metlica de 1.2 mm. de espesor, compuesto de dos tapas
laterales de 550 mm. de dimetro estampadas y rodonadas,
sistema de grifera interna que permite el paso del agua en
forma constante a travs del eje sin necesidad de desenrollar la
manguera.
Pintura termo convertible epxico, 90 micras en doble capa
Color Rojo Standard
Certificacin Internacional
Certificacin Chilena por IDIEM
Cumple con norma RIDAA
Incluye:
Manguera Semirgida de 1" x largos 25 MT ., fabricada en caucho
sinttico 100 % impermeable
Presin de trabajo 225 lbs
Presin de ruptura 710 lbs.
Pitn con patrn de descarga variable, posicin de corte

Foam Proportioning & Loose Equipment


Product
Williams High Head Through-the-Pump
1500 Portable Foam System
Description:

The Williams High Head Through-the-Pump 1500 Portable Foam


System was designed to turn any pumper into a foam producing device. This
unit will proportion 3% foam solution up to 1500 GPM. It can work against
hydrant pressure up to 50 PSI with only 150 PSI discharge pressure. This
economical system is easy to use and is completely water driven; there are no
pumps or parts to maintain. Cant get the foam to the pump? Not a problem!
The WTTP was designed to proportion foam from remote locations.

FEATURES:

Operates against 33% Pump Suction Pressure.


(Example: Master Pressure @150 PSI, Suction Pressure @ 50 PSI)
Proportions Class B Foam up to 1500 GPM at 3%.
Proportions Class B Foam up to 750 GPM at 6%.
Positive Shut-Off on Metering Valve.
Requires no maintenance.
Portable.
Water Powered.
Remote Proportioning Capabilities.
Check Valve Prevents Water from Back Flowing
into Concentrate Source.

System Includes:

Base Unit with Jet Pump & Metering Valve.


2.0 Clear Concentrate Pick-Up Hose.
2.0 Valved Drum Stinger.

ThunderStorm

AFFF/ATC

MATERIALS OF CONSTRUCTION:

Brass with Stainless Steel Trim.

Notes:

1. The following table is based on 150 psig operating pressure at the jet pump inlet.
2. At 50 psi water pump inlet, maximum hose lay is 25 ft. of 3.0 hose.
3. For drafting operations or pressure below 10 psi, use the 10 psi numbers shown.

Maximum Hose Lay (ft) For Remote Proportioning Portable WATP 1500 System
PUMP INLET PRESSURE
Solution Rate
1%

3%

30

10 PSI
HOSE SIZE
6%

20 PSI
HOSE SIZE

30 PSI
HOSE SIZE

40 PSI
HOSE SIZE

2.5

2.5

2.5

2.5

12

850

1700

625

1250

400

775

200

325

100

40

825

1675

600

1225

375

750

175

300

400

160

80

800

1625

575

1175

350

725

150

275

1000

400

200

750

1500

525

1050

325

650

125

250

2000

750

375

650

1325

475

950

300

600

100

225

4000

1500

750

525

1050

375

775

250

475

75

200

Foam Proportioning & Loose Equipment


Product:
Williams Pressure Reducing Valve
(WPRV/3, 3P, 4 & 4P)
Description:

Maintains constant pre-set inlet pressure for use in conjunction with the Williams High Head Through/Around The Pump
(or comparable) foam systems. Allows any firewater pump to produce suction side foam at virtually ANY positive inlet pressure.
As such, the WPRV eliminates need for operator intervention to
adjust intake gate valves due to suction pressure fluctuations as a
result of changes in pump discharge flow. Thus, the added burden
of assuring a maximum pump intake pressure (based on pump
discharge pressure) associated with traditional suction side foam
systems simply goes away.

Additional Applications:

Got a CAFS or Balanced Pressure system? The WPRV can provide reduced pump inlet pressures to allow increased
engine/PTO speed to maintain higher compressor or foam pump output when operating with positive pump inlet pressures.
Installed within a discharge line, the WPRV maintains a preset pressure for hand lines or ground monitors independent of
higher pump discharge pressures.

Features:
3 Modes of Operation:

1. AUTOMATIC Controls pre-set pressure from 15-115 PSI


2. OPEN Full flow to rated capacity
WPRV/3 500 GPM w/ 7 PSI drop
WPRV/4 1500 GPM w/ 20 PSI drop
3. CLOSED Bubble tight shut off
NFPA 1901, 14-6 COMPLIANT Exclusive WPRV pilot control also provides bubble tight shut off to comply with
NFPA 1901, 19-3.6, TIA 99-1 preventing foam solution back flow into a potable (hydrant system) water supply
PRESSURE RATINGS 230 PSI Max. 20 PSI Min. (Prevents reducing hydrant system pressures below 20 PSI)
INLET/OUTLET WPRV/3: 2.5 NST; WPRV/4: 5 Storz

Options:
WPRV/3 & 3P (Portable)

In-Truck installation with panel mount control valve, standard 2.5 (F)NST swivel inlet w/ strainer and bleeder port
3 (F) NST inlet w/strainer/outlet
4 Storz inlet w/strainer/outlet WPRV/4 & 4P (Portable)
In-Truck installation with panel mount control valve, standard 5 Storz inlet w/strainer, adjustable intake relief,
bleeder port and mounting hardware
Inlet intake relief valve & bleeder (4P)
4 Storz inlet w/strainer/outlet
6 (F)NST swivel outlet for direct mounting to pump intakes
Inlet/outlet pressure gauges
Carrying handle
5 LDH X 10 Long with 5 Storz couplings (200 PSI operating pressure)

Materials of Construction:

WPRV/3 & 3P Epoxy coated cast iron w/brass and stainless steel trim
WPRV/4 & 4P Epoxy coated & anodized aluminum w/brass and stainless steel trim

Foam Proportioning & Loose Equipment


Product
Tank Farm Fire Fighting Foam System

Old Style 2 x 6 Gun JRCP Hose Lay Comparison


Flow
Rate

Solution
%

Jet
Size

# of Jet
lays

2.0 Hose
Lay (ft) Time (min)

6,000

N/A

6,000

1.5

6,000

2.50 Hose
Lay (ft) Time (min)

3.0 Hose
Lay (ft) Time (min)

N/A

350

1.0

750

2.8

440

1.4

1,300

6.1

2,550

17.4

N/A

N/A

75

0.3

150

0.6

Ambassador JRCP Hose Lay Comparison


Flow
Rate

Solution
%

Jet
Size

# of Jet
lays

2.0 Hose
Lay (ft) Time (min)

2.50 Hose
Lay (ft) Time (min)

3.0 Hose
Lay (ft) Time (min)

6,000

N/A

N/A

350

1.0

750

2.7

6,000

1.5

434

1.3

1,250

6.0

2,550

17.2

6,000

N/A

N/A

150

0.5

300

1.2

Foam Proportioning & Loose Equipment


Product:
Jet Ratio Controllers (Jet Pumps)
Description:

Utilizing a small amount of water, this high efficiency venturi-type device moves foam concentrate from a remote storage
location to a matched Hydro-Foam nozzle. This all-hydraulic
system dramatically simplifies and improves the logistics of
moving the high quantities of foam concentrate required to
extinguish a large flammable liquid fire. Foam concentrate is
delivered from the Jet Ratio Controller to a matched HydroFoam nozzle via fire hose. Depending on nozzle and hose
size, as well as the percentage of foam mixed (1% or 3%), the
distance between the foam supply and Hydro-Foam nozzle
can be up to 2,500 feet.
Jet Ratio Controllers are supplied in conjunction with matched Hydro-Foam nozzles. Foam concentrate inlet on
matched nozzle can be provided with 8 ft. of reinforced clear plastic hose with PVC shut-off valve, and/or metering valve
stinger. This configuration allows foam concentrate to be drawn directly from a foam concentrate drum and then delivered
efficiently to the nozzle via fire hose.

Jet Ratio Controllers are provided with connections at three ports, designated as inlet, discharge and suction. Inlet
(female swivel) and discharge (rigid male) has National Hose thread (NST, NH) connections with NPT (M) connection for
the concentrate inlet port. Foam concentrate inlet is furnished with standard drum kit, which consists of flexible suction hose,
rigid PVC Stinger pipe and shutoff valve. Jet Ratio Controller body is all brass construction. H series jet ratio controllers
are available, on special order, for elevated nozzles, or other high back pressure applications.

Typical Schematic

ThunderStorm

AFFF/ATC

Foam Proportioning & Loose Equipment

1.5
INLET

TYPICAL SCHEMATIC

ThunderStorm
AFFF/ATC

MODEL

3%

Flow Match 1%

DISCHARGE A

SUCTION B

LENGTH C

1.5JP24

750 GPM

2000 gpm

1.5

1.5

12.375

1.5JP30

1000 GPM

2500 gpm

1.5

1.5

12.375

2.0JP60

2000 GPM

5000 gpm

2.5

15.5

NOTE: 6% APPLICATIONS AVAILABLE UPON REQUEST

Foam Proportioning & Loose Equipment


Product:
95 gpm Liquid Eductor
Description:
The Elkhart 242-95 Eductor is a device used for educting a liquid concentrate solution into the water stream of
1-1/2 coupled fire hose lines.
The Eductor is constructed of Armor-Lyte composite
material with stainless steel components for resilience and
durability. Armor-Lyte is impervious to the corrosion
caused by high concentrate detergents, salt water and most
chemicals.
Each eductor comes equipped with a 1-1/2 F NH
female swivel connector input, a 1-1/2 M NH male outlet
and a 3/4 male Garden Hose Thread inlet for the concentrate pick-up hose.
The 242-95 Eductor is factory calibrated for pump flow rates of 95gpm (356 lt/m). The Eductor comes complete with
three different checkvalves for three different concentrate eduction rates. When attached, the Black checkvalve will educt at
a 0.5% rate, the Purple checkvalve will educt at a 1% rate and the Green checkvalve is for educting at a 3% rate.
T o swi tch check val ves on the eductor uni t, gentl y grasp the check val ve body wi th pl i ers or vi se gri ps and unscrew.
Carefully screw alternate checkvalve into eductor body, thread to hand-tight. There is no need to over tighten.
The 242-95 Eductor can be used as either an End-of-the-Line or as a Pump Mounted System. The eductor is designed
for a nominal operating pressure of between 75 and 150 psi. If proportioning 3%, the 242-95s are restricted to a maximum
1.50ID fire hose goes to 200 feet when used with a 95+gpm nozzle.

The Eductor comes complete with


three different checkvalves for three
different concentrate eduction rates.

*Armor-Lyte is a registered trademark of


Williams Fire and Hazard Control, Inc

Foam Proportioning & Loose Equipment


Product:
Spectrum Inline Eductors
Description:

Spectrum Inline Foam Eductors provide the simplest and


most economical method of introducing a controlled flow of
foam concentrate into a pressurized water stream. As opposed to
Hydro-Foam Technology, (which is used in conjunction with
master stream nozzles) these Venturi-Type foam proportioners
are designed to be used in conjunction with a matched constant
flow end-of-line device (nozzle), where adequate water pressure
is available. Inline foam eductors are capable of operating at inlet
pressures as low as 70 psi, but in most cases adequate residual fire
fighting pressure at the nozzle requires that the eductor inlet pressure be at least 100 psi, or greater.
Spectrum Inline Eductors are rated to flow 60, 95, or 125 gpm @ 150 psi inlet. Nominal flow rates at other inlet pressures are listed below. Eductor outlet pressure is approximately 65% of inlet pressure. Eductor components, including body,
venturi jet and metering orifice are constructed of corrosion-resistant brass.

Standard water inlet - NH (F) swivel. Foam solution discharge - NH (M). Complete with clear pvc concentrate pick-up
hose with slotted brass stinger; 1% or 3% fixed orifice; ball check valve.

RIGID

Model

Nominal Flow
@100 PSI

Nominal Flow
@125 PSI

Nominal
@150 PSI

Proportioning

1.5 -60 gpm

49 gpm

55 gpm

60 gpm

1% or 3%

1.5 -95 gpm

78 gpm

87 gpm

95 gpm

1% or 3%

1.5 -125 gpm

102 gpm

114 gpm

125 gpm

1% or 3%

Foam Proportioning & Loose Equipment


Product:
Spectrum Double Action By-Pass Eductor
Description:

The Spectrum Double Action By-Pass Foam Eductor provides the versatility of a full-flow water by-pass foam proportioner
in conjunction with the simplicity and reduced weight of a standard, single waterway inline eductor. This specialty by-pass type
foam venturi transforms any 1.5 handline into a foam proportioning system. Three flow rates are available: 60 gpm; 95 gpm; 125
gpm. Flows are based on 200 psi inlet pressure. The eductor will
proportion foam at lower inlet pressures, provided that discharge
pressure is not excessive. Positive shut-off metering allows foam
proportioning to be adjusted and set from 0.5% to 3%. Body is
constructed of durable 6061 - T6 (black) anodized aluminum.

In operation, foam is produced by simply installing the system in the hose line, emersing the concentrate pickup tube
into an adequate supply of ThunderStorm AFFF foam concentrate and adjusting the eductor to the foam position. When
foam application is no longer needed, there is no need to remove the eductor for application of water only. This conversion
is easily accomplished by simply rotating the foam control sleeve to the water setting. The result is an enlarged waterway
which allows for water only application.

Other Features Include:

Positive Shutoff Metering Valve.


Integral Concentrate Ball Check Valve.
Clear Plastic Concentrate Pick Up Hose with Rigid Stinger.
Lightweight, Compact Design (4 lbs., nominal).

Double Action
Eductor

Nominal Flow
@200 PSi

K-Factor

Inlet

Discharge

Proportioning
Range

60 gpm

60 gpm

4.25

1.5 NH (F) Swivel

1.5 NH (M)

0.5%-6%

95 gpm

95 gpm

6.72

1.5 NH (F) Swivel

1.5 NH (M)

0.5%-6%

125 gpm

125 gpm

8.84

1.5 NH (F) Swivel

1.5 NH (M)

0.5%-6%

PKW Dry Chemical Delivery Manifold


Typical Layouts

Hydro-Chem Technology
Manifolds for Hydro-Chem Systems

Dry Chemical Manifiold - 4 Inlets

Dry Chemical Manifiold - 6 Inlets

Hydro-Chem Technology
Typical Hose Lay For Hydro-Chem Trailer mount Systems
1000 GPM Hose Layout

Patriot II Hose Layout

Monitors
Product:
Daspit Tool
Features:

Patented Daspit Tool tank frame clamp with 5 vertical waterway


Daspit Tool Specialty Flange Monitor Adapter
Daspit Tool Rotator Elbow with Storz inlet and 4.5 (F) NH swivel adapter

Component Weights:

Daspit Tool Tank Clamp = 89 lbs

Accessory Component Weights:

90 Aluminum Rotator Elbow - 4.5 (F) NH Swivel x 5 Storz = 22 lbs 30 Aluminum Rotator Elbow - 4.5 (F) NH
Swivel Elbow x 5 Storz = 9 lbs
4 Aluminum Tiller Bar Monitor w/ 4.5 (F) NH Swivel inlet = 43 lbs
4 Aluminum Dual Hand Wheel Monitor - 4.5 (F) NH Swivel inlet = 50 lbs
Ranger 1.5 Nozzle = 22 lbs

Applications:

Sunken roof
Rim Seal fire
Vapor Suppression/Mitigation

Options:

3 Aluminum Waterway Monitor w/Tiller Bar Control


250-1,000 gpm Automatic Nozzle
4 Aluminum Waterway Monitor w/Dual Hand Wheel Control
500-2,000 gpm Automatic Nozzle
Rim Mounted Model
Truck Mounted Model
Throw-Down Model
Tank Mount Standard Unit

For US and Foreign Patent and Trademark information, please refer to page IP2

Monitors
Product:
Daspit Tool - Truck Mount

For US and Foreign Patent and Trademark information, please refer to page IP2

Monitors
Product:
Daspit Tool - Throw Down Model
Component Weights:

Daspit Tool Throw Down Mount = 113 lbs


8 Stabilizing stakes = 64 lbs

47.875

For US and Foreign Patent and Trademark information, please refer to page IP2

Monitors
Product:
Alpha MA-HV4 Monitor
Description:

Rugged lightweight aluminum construction 4 ID full flow monitor with Quick Acting Tiller-Bar control for vertical
and horizontal movement. Red powder coat anodized aluminum. The single 4 full-flow waterway with internal turning vanes
is designed to provide maximum efficiency. The Easy-Lock brake system insures that the nozzle position stays put with
the simple twist of an ergonomically designed locking bar. Monitor features a 3.50 (M) NH outlet and a 4.0 150# ASA
flat-faced flange inlet. Horizontal articulation is 360 and vertical travel is 75 up and -25 down.

Monitors
Product:
Alpha-E Tiller Bar Montior - 3
Description:

Rugged, corrosion resistant brass construction; unique configuration flows up to 1250 gpm; compact - just 16 high; 3
NPT female, 3 or 4 150# ANSI flange; vertical movement 90 degrees above horizontal to 45 degrees below; full, continuous
360 degree rotation; rugged, stainless steel lock hardware; brass balls in all swivel joints; grease fittings for easy lubricaion;
durable acrylic urethane finish

Alpha-E Tiller Bar


Monitor

Waterway

Inlet

Discharge

Material

Vertical Travel

Horizontal
Rotation

3-4 Flanged

2.5 NH(M)

Cast Brass

90

360

Monitors
Product:
SharpShooter Four Tiller Bar -4
Description:

Superior grade 4 I.D. waterway monitor with tiller bar


control for vertical and horizontal movement. Designed for
use in corrosive atmospheres that require the dependability
and durability of an all brass monitor. Single waterway
with turning vanes providing excellent projection for water
or foam streams. Flows up to 1,500 gpm.
Tiller bar control with brake band swivels, adjusts, then
locks at the vertical and horizontal position. Vertical setting
is from minus (-) 10 to plus (+)70. Full 360 degree horizontal travel. Painted red polyurethane finish. 3.5NH (M)
discharge threads. Base -4 150 # ASA flange.

Sharpshooter
Four

Waterway

Inlet

Discharge

Material

Vertical Travel

Horizontal
Rotation

4 Flange

3.5 NH(M)

Cast Brass

80

360

Monitors
Product:
SharpShooter Four Dual Handwheel -4
Description:

Superior grade 4 I.D. waterway monitor with dual handwheel/worm


gear operation for vertical and horizontal movement. The ultimate monitor
for portable applications or for fixed installations where precise and posi
tive control are needed. Designed for use in corrosive atmospheres that
require the dependability and durability of an all brass monitor. Single
waterway with turning vanes providing excellent projection for water or
foam streams. Flows up to 1,500 gpm.
V erti cal handwheel adj usts traj ectory f rom mi nus ( -) 10 to pl us ( +) 90.
Horizontal handwheel allows for full 360 rotation. Painted red polyure
thane. 3.5NH (M) discharge threads. Base -4 150 # ASA flange.

Sharpshooter
Four

Waterway

Inlet

Discharge

Material

Vertical Travel

Horizontal
Rotation

4 Flange

3.5 NH(M)
Flange

Cast Brass

100

360

Monitors
Product:
Alpha-SHW Single HandWheel Monitor - 3
Description:

Rugged, cast brass construction Full 3.0 unobstructed waterway FLows up to 1250 GPM Handwheel driven worm
gear fully enclosed and protected from the elements Stainless steel worm Vertical travel from 70 above to 70 below
horizontal Gear holds vertical position wherever it is stopped Four ball races with bronze balls and grease zerks for easy
lubrication Full 360 rotation with positive twist lock 2.5 male outlet FM Approved See chart for base options Finish
red urethene enamel.

Model

Alpha-SHW

Waterway

Inlet

Discharge

Material

Vertical Travel

Horizontal
Rotation

3 or 4 Flange

2.5 NH(M)

Cast Brass

90

360

Monitors
Product:
Spectrum Mini- Monitor -2
Description:

Designed for use in corrosive atmospheres that require the


dependability of an all brass monitor. Suitable for most industrial
environments. Flows up to 300 gpm @ 100 psi. Full 2 I.D. waterway, efficiently designed to minimize pressure drop. 2 NPT female
inlet base, 1.5 NH male discharge tip. Tiller bar control handle with
rubber grip. Vertical (110) and horizontal (360) adjustments with
positive quarter-turn locking handles. Natural brass finish.

Model
Mini Monitor

Waterway

Inlet

Discharge

Material

Vertical Travel

Horizontal
Rotation

2NPT (F)

1.5 NH(M)

Cast Brass

110

360

Oscillating Monitors
Product:
Spectrum High Flow Model 4 Oscillating Monitor Tiller Bar Control
Description:

For flows between 750 - 1500 gpm. Spectrum High Flow Model
4 water-powered oscillating monitor is constructed of predominantly
corrosion-resistant materials. Cast brass monitor body with stainless steel trim. 4 I.D. waterway with turning vanes. Controls provided for adjusting vertical trajectory as well as horizontal position.
Reciprocating motion is generated by a two-way high performance
hydraulic actuator. Oscillation is accomplished through the use of
plated sprockets and a heavy duty drive chain. Standard arc of oscillation is from 0-90 and speed of oscillation is from 0-40 per second.
Vertical trajectory is from minus (-)10 to plus (+)70. Standard inlet
flange - 4 150# ASA RF Flange. Monitor is to be used with either
a non air-aspirating or air-aspirating nozzle. Standard 3.5 NH (M)
discharge. Oscillating mechanism is Factory Mutual Approved - File
No. J.I.1R6A3.AF.

(Nozzle shown for


reference only)

Model

Flow @ 100 PSI

Inlet

Discharge

Water I.D.

High Flow Model 4


Tiller Bar Control

Between 750-1400 gpm

4 150# ASA RF flange

3.5 NH (M)

* Minimum operating pressure = 50 psi

Oscillating Monitors
Product:
Spectrum Medium Flow Model 4
Oscillating Monitor
Description:

For flows between 150-750 gpm. Spectrum Medium Flow


Model 4 low profile water-powered oscillating monitor features a
super-compact design, as well as predominantly corrosion resistant
materials of construction. Reciprocating motion is generated by a
two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive
chain. Arc of oscillation is from 0-185 and speed of oscillation is
from 0-40 per second. Nozzle elevation is from 10 below to 70
above horizontal. Single brass 3 I.D. waterway with turning vanes
provided with positive horizontal and vertical locks. Standard inlet
flange - 4 150# ASA RF Flange. Monitor can be used with either a
non air-aspirating or air aspirating nozzle. Oscillating mechanism is
Factory Mutual Approved - File No. J.I.1R6A3.AF.

(Nozzle shown for


reference only)

Model

Flow @ 100 PSI

Inlet

Discharge

Water I.D.

Medium Flow Model 4

Between 150-750 gpm

4 150# ASA RF flange

2.5 NH (M)

* Minimum operating pressure = 50 psi

Oscillating Monitors
Product:
Spectrum Marine Grade Model 4
Oscillating Monitor
Description:

For flows between 150-750 gpm. Spectrum Marine Grade Model 4 low profile water-powered oscillating monitor features a super-compact design, as well as construction of totally corrosion resistant materials to include inlet flange, enclosure
and drive mechanism, sprocket and chain all manufactured in 316 Stainless Steel. Reciprocating motion is generated by a
two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy
duty drive chain. Arc of oscillation is from 0-185 and speed of oscillation is from 0-40 per second. Nozzle elevation is from
10 below to 70 above horizontal. Single brass 3 I.D. waterway with turning vanes provided with positive horizontal and
vertical locks. Standard inlet flange - 4 150# ASA RF Flange. Monitor can be used with either a non air-aspirating or air
aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.

Model

Flow @ 100 PSI

Inlet

Discharge

Water I.D.

Marine Grade
Model 4

Between 150-750 gpm

4 150# ASA RF flange

2.5 NH (M)

* Minimum operating pressure = 50 psi

Oscillating Monitors
Product:
Spectrum Low Flow Model 4 Oscillating Monitor
Description:

For flows between 100-350 gpm. Spectrum Low Flow Model 4 low
profile water-powered oscillating monitor features a super-compact design,
as well as corrosion resistant materials of construction. Reciprocating
motion is generated by a two-way high performance hydraulic actuator.
Oscillation is accomplished through the use of plated sprockets and a heavy
duty drive chain. Arc of oscillation is from 0-185 and speed of oscillation
is from 0-40 per second. Nozzle elevation is from 30 below to 80 above
horizontal. Single brass 2 I.D. waterway. Provided with positive horizontal
and vertical locks. Standard inlet flange -4 150#. Monitor can be used with
either a non air-aspirating or air-aspirating nozzle. Oscillating mechanism is
Factory Mutual Approved - File No. J.I.1R6A3.AF.
(Nozzle shown for
reference only)

Model

Flow @ 100 PSI

Inlet

Low Flow Model 4

Between 100 - 350 gpm

4 150# ASA RF flange

* Minimum operating pressure = 50 psi

Discharge
1.5 NH(M)

Water I.D.
2

Oscillating Monitors
Product:
Durham Oscillating Monitor Conversion Kit
Description:

The Durham Conversion Kit transforms an existing manual station monitor into an oscillator. Designed for use with most 2.5 or 3
I.D. single waterway monitors, flowing up to 750 gpm. Upgrading
foam or water monitor coverage in any area is now as easy as unbolting the existing monitor and inserting the conversion kit between
the flanges. Oscillating mechanism is identical to the one used on
the Spectrum Model 4 Oscillating Monitor and is Factory Mutual
Approved - File No. J.I.1R6A3.AF. Standard inlet and discharge
flange is -4 ASA RF Flange 150#. Optional inlet and discharge
flanges available upon request.

Model

Flow @ 100 PSI

Inlet

Discharge

Water I.D.

Durham
Conversion Kit

up to 750 gpm

4 150# ASA RF flange

4 150# ASA RF flange

2.5 or 3

Remote Control Monitors


Product:
Spectrum Direct-Mounted Electric Actuated Monitor
Description:

Flows water or foam from 500 to 6,000 gpm. The Spectrum Direct-Mounted
Electric Actuated High Volume/Remote Control Monitor has a programmable
oscillation capability, but may also be overridden with a matched Hydro-Foam
nozzle operated remotely through the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through
the use of handwheels. Foam concentrate can be proportioned at the nozzle
through the use of a jet ratio controller and atmospheric concentrate storage tank.
All electric actuators are reversible, NEMA 7 explosion proof, refinery grade,
F.M. Approved and C.S.A. certified. No external controls, starters, or starters in
motor control center are needed. Only power and control conductors are required.
Monitor can be programmed to return to home position (horizontal, vertical,
nozzle to wide angle fog) after use, automatically, whether P.L.C. controlled or
hard wired.
Two direct mounted electric actuators with speed reducing gear drives installed on the motor enable remote control of
horizontal position, as well as vertical trajectory. Field-adjustable limit switches on each actuator allow 340 horizontal rota
tion and from minus (-)70 to plus (+)70 vertical travel. Monitor traversing speed is a least 10 per second. A third directmounted electric actuator enables remote operation for the nozzles discharge pattern, from wide fog to straight stream.
Weather protective cowlings are provided over all gears and shafts. Monitor and controls are designed for minus
(-)20 F operation. Maximum working pressure is 200 psi.
Stainless Steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel
swivels with stainless steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Standard motor voltage is 480/3/60
Standard Control voltages is 120 Vac. Other voltages are available when required.

Model

Nominal flow range

Inlet

Pressure Drop

4 Waterway Monitor

500-1500 gpm

4 flange

@ 1500 gpm-9 psi

6 Waterway Monitor

1500-3000 gpm

6 flange

@ 3000 gpm-7 psi

8 Waterway Monitor

2500-6000 gpm

8 flange

@ 6000 gpm-10 psi

Remote Control Monitors

Spectrum Direct-Mounted
Electric Actuated Monitor

Remote Control Monitors


Product:
Spectrum Electro/Hydraulic Actuated Monitors
Description:

Flows water or foam from 500 to 3,000 gpm. The Spectrum Electro/
Hydraulic High Volume/Remote Control Monitor is operated remotely through
the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through the use of handwheels.
Two hydraulic actuators installed on the monitor enable remote control of
horizontal position, as well as vertical trajectory. Maximum travel is limited to
340 degrees horizontal travel and from minus (-)70 degree to plus (+)70 degree
vertical travel. Monitor traversing speed is at least 8 degrees per second. A
direct-mounted linear hydraulic actuator enables remote operation for the
nozzles discharge pattern, from wide fog to straight stream. Weather protective
cowlings are provided over all gears and shafts.

Equipped with a standard non air aspirating fog-to-straight stream nozzle.


With a matched Hydro-Foam nozzle, foam concentrate can be proportioned at
the nozzle through the use of a jet ratio controller and atmospheric concentrate
storage tank.
Stainless steel monitor (waterway) with red epoxy finish. Includes lifting
lug for handling and mounting. Stainless steel swivels with stainless steel ball
bearings. Steel/bronze gears. Nickel plated brass shaft. Anodized aluminum
fog/straight stream nozzle.

Model

Nominal flow range


@ 100 psi

Inlet

Pressure Drop

4 Waterway Monitor

500-1500 gpm

4 flange

@ 1500 gpm-9 psi

6 Waterway Monitor

1500-3000 gpm

6 flange

@ 3000 gpm-7 psi

Remote Control Monitors

Spectrum Electro/Hydraulic
Actuated Monitor

Monitor Accessories
Product:
Hydrant Monitor Stand
Description:

For mounting monitor station (Hydro-Foam or water only)


onto any fire hydrant. Standard configuration: water inlet is 2.5
NH(F) brass swivel; 3 waterway with 90 degree elbow; bolted vertical support stanchions; flanged discharge (specify either 3 or 4
150# ASA). Red polyurethane finish.

Monitor Stand shown with Hydrant and Optional


Monitor and Nozzle.
Note: hydrant not included.

Ranger3 Nozzle
Product:
Ranger3 Monitor/Nozzle
The Ranger3, featuring Smart Nozzle Technology, was designed for todays
Industrial fire fighting and protection needs. Hazards involving flammable liquids in
storage and liquids under pressure have met their match with the New Millennium
Equipment from Williams Fire & Hazard Control, Inc.
The Ranger3 nozzle combination is capable of not only self-educting foam
concentrate, but can do so while maintaining a nearly constant pressure (+/-10%)
and a constant foam percentage (1% or 3% selectable) regardless of the flow rate.
Discharge flow rates from 1000-3000 USGPM (3800-11356 LPM) can be water only,
Hydro-Foam (using jet pumps or automatic constant/selectable metering) or HydroChem for extinguishing liquids and gases under pressure.

Advancing the Fire Fighters Ability with Equipment and


Knowledge.
This Hybrid nozzle has the unique capability to perform as an automatic pressure or fixed gallonage nozzle. During
automatic operation the nozzle will respond to varying flows to maintain a nearly constant tip pressure, thus maximizing effective range for a given discharge flow. Once the nozzle reaches the fixed gallonage set point (1000-3000 GPM), it performs
as a conventional fixed gallonage nozzle. This is desirable for foam proportioning operations on storage tank fires or other
hazards requiring specific application rates. This nozzle is capable of Hydro-Foam proportioning at rates up to 3000 GPM
@ 3%. It can automatically maintain a nearly constant foam percentage (1% or 3%) throughout the entire flow range while
self-educting. It can optionally be configured to proportion foam from remote locations using jet pump technology (thus forfeiting the constant/selectable metering feature). The extensive Ranger3 options list allows this nozzle to be Hydro-Chem
capable (without Hydro-Foam capability) with PKW flow rates from 25 lbs/s to 50 lbs/s. Pattern control from straight
stream to full fog is accomplished via a full wrap-around handle attached to the outer sleeve.
*See Williams Nozzle Range Chart on page D5

Standard Features List:

Dual Mode Automatic/Fixed Operation


Fixed Gallonage plugs: 1K, 2K, 3K
Hydro-Foam Constant/Selectable
1% or 3% Nozzle
Wrap-around handle design for pattern control

For US and Foreign Patent and Trademark information, please refer to page IP2

Options:

Hydro-Chem Tip conversion


Choke tubes (25 and 50 lbs/s)
Dry chemical manifolds (4 inlet or 7 inlet)
1.5JP30 Jet Pump w/stinger (one)
2.0JP60 Jet Pump w/stinger (one)
2.5 x 10 Dry Chemical Hose
3-2.5 FNST x 3.0 MNPSH Siamese
(Jet to Monitor Supply)
1-2.5 FNST x 3-1.5 MNST Wye
(Jet Pump Supply)

Hydro-Foam Nozzles
Product:
Ranger Lightning
Description:

Ranger Lightning is the latest in a series of innovative lightweight Hydro-Foam, self-contained foam systems as defined by
NFPA standard 1901, Section A-8-3.22.
This rugged design is the first in a series of master stream nozzles to feature Williams Fire & Hazard Controls Armor-Lyte
construction.
Armor-Lyte is a composite of lightweight, non-corrosive materials that provide years of trouble-free service.

Features

Self-educts foam concentrate directly from an atmospheric source.


Selectable gallonage with matched foam proportioning of 1% and 3% at 350, 500, or 750 gpm at 100 psi operating
pressure.
Flush setting as recommended per NFPA 1964.
Change flow rate, proportion rate, or flush without the need to
shutdown.
Positive lock feature for rate selection!
Self-contained internal stream straightner to maximize range!
T-handle for pattern control for full fog to straight stream.
Complete unit weighs only 6 lbs!
1.00 MNPT foam inlet port.
2.50 FNST Swivel inlet connection.

Options
Available in Hydro-Chem and Master Stream (water only) versions.
Actuated pattern control in 12vdc, 24vdc, pneumatic, or hydraulic.
Nickel-plated brass swivel inlet.
Nozzles available at: .5% & 1% proportioning selections
Special inlet threads available upon request.

Inlet view

Selectable gallonage with matched foam


proportioning of 1% and 3%

Hydro-Foam Nozzles
Product:
HF Ranger Select - Automatic/Constant Metering
Foam Nozzle
Description:

Introducing the most advanced foam fire fighting nozzle ever made! The
Hydro-Foam Ranger Select Nozzle combines the effective range of
an automatic nozzle, while incorporating the exclusive combination of self
educting/selectable constant metering foam proportioning. It is capable of
accurate foam proportioning (Selectable 1% or 3%) over a broad range of
flows (250 - 1500 gpm), while maintaining automatic control of tip pressure
(100 psi +/- 10%) over the entire flow range. This constant nozzle pressure
capability maximizes the effective discharge reach for any given flow. The
discharge pattern is adjustable from full fog to straight stream. Constructed of
anodized aluminum with wrap around control handle and protective rubber
bumper. Water inlet is available in nickel plated brass as an option. Manually
operated nozzle is available with automatic controls: 12v; 24v; or hydraulic.

Options:

2.5 or 3.5 swivel


Nickel plated brass swivel
12v, 24v or hydraulic pattern activation

Model
Ranger Hydro-Foam

Ranger HFR 1.0 M 2.5*

Ranger HFR 1.5 M 3.5*

Water Inlet *

2.5 (F) NH Swivel

3.5 (F) NH Swivel

Foam Concentrate Inlet *

1.50 M/NPT
w/1.5 x 8 Flexible Pickup
Hose & 1.5 Rigid PVC
Drum Stinger

2.00 (M) NPT


w/2 x 8 Flexible Pickup
Hose & 1.5 Rigid PVC
Drum Stinger

Foam/Water Flow
(@ 100 psi)

250-1000 gpm

250-1500 gpm

Proportioning
(Selectable)

1% or 3%

1% or 3%

Application

Class B Liquid Fires

*Refer to page D14 for complete part# and ordering information


For US and Foreign Patent and Trademark information, please refer to page IP2

Hydro-Foam Nozzles
Product:
Constant Flow Ranger 750, 1000, 1250 & 1500 GPM
Description:

Water powered nozzle system that proportions and delivers either water
or foam to the hazard area. Fully adjustable from straight stream to full fog.
Constructed of hard anodized aluminum alloy with stainless steel trim. Water inlet
is available in nickel plated brass as an option. Nozzle is supplied with flexible 8
ft. pick-up hose with 1.5 rigid pvc drum stinger. Built in select feature provides
proportioning at either 1% or 3%. Fixed foam proportioning may be proportioned
directly from atmospheric source. Manually operated nozzle is also available with
automatic controls: 12v; 24v; or hydraulic. Optional Jet Pump is available for
remote proportioning.

Nominal Flow
@100psi
K-Factor
Nominal Range
@ 100psi
(straight stream)
Water inlet standard
Concentrate Inlet
Proportioning
without jet

Fixed Ranger
750

Fixed Ranger
1000

Fixed Ranger
1250

Fixed Ranger
1500

750 gpm

1000 gpm

1250 gpm

1500 gpm

75

100

125

150

215 ft.

250 ft.

260 ft.

275 ft.

2.5NH (F)

2.5NH (F)

3.5NH (F)

3.5NH (F)

1.5 NPT(M)

1.5 NPT(M)

2 NPT(M)

2 NPT(M)

1% / 3%

1% / 3%

1% / 3%

1% / 3%

For US and Foreign Patent and Trademark information, please refer to page IP2

Monitor Foam Nozzles, Air Aspirating


Product:
Hydro-Air Foam Monitor Nozzles, Medium (Not shown)
& Big Body
Description:

Exclusive super-compact, air aspirating foam nozzle with adjustable stream


from full fog to straight stream! Has the appearance of a standard fog/straight
stream monitor nozzle, yet the Hydro-Air venturi provides foam expansion ratios
of up to 6:1 by actually inducting air into the center of the master stream. Medium
Body Nozzles are available in lightweight anodized aluminum. Standard flow
rates from 350 to 1500 gpm at 100 psi. As an option, nozzles can be factory modified to flow from 200 to 1500 gpm at specific inlet pressures.

Big Body Ranger


Hydro-Air Nozzle
750-1500 GPM

Air Inlet

Foam Inlet
(F) NH Swivel

Medium Body
HA-350

Medium Body
HA-500

Medium Body
HA-700

Big Body
HA-1000*

Big Body
HA-1250

Big Body
HA-1500*

Flow @100 psi

350

500

700

1,000

1,250

1,500

Standard inlet

2.5NH(F)

2.5NH(F)

2.5NH(F)

2.5 or 3.5

2.5 or 3.5

2.5 or 3.5

Material

Brass

Brass

Brass

Aluminum

Aluminum

Aluminum

*Refer to page D14 for complete part# and ordering information


For US and Foreign Patent and Trademark information, please refer to page IP

Monitor Nozzles
Product:
Ranger Automatic - Master Stream Nozzle
Description:

The Ranger Automatic Master Stream Nozzle is made for use


on monitors, ladder pipes, deluge guns and aerial platforms. This nozzles uniquely-designed constant-pressure feature assures maximum
effective reach for either water or foam/water solution. The tip pressure is automatically controlled to maintain a constant pressure (100 psi
+/- 10%) over the nozzle flow range, which is from 250 gpm to 1,500
gpm.
(Other maximum flow stops available). The nozzle pattern is
adjustable from full fog to straight stream. Constructed of anodized
aluminum with exclusive wrap-around control handle and protective bumper. Water/foam solution inlet is available in nickel plated brass
as an option. Nozzle is used in conjunction with an independent foam
proportioning system when applicable. Manually operated nozzle is also available with automatic controls: 12v; 24v; or hydraulic.

Model

Nozzle Pattern
Control

Solution Inlet*

Solution Rate
(GPM)

Material of
Construction

MSR1.O M 2.5

Manual

2.5

250-1,000

Anodized Alum.

MSR1.5 M 3.5

Manual

3.5

250-1,500

Anodized Alum.

MSR1.O A 2.5

12 vdc electric

2.5

250-1,000

Anodized Alum.

MSR1.5 A 3.5

12 vdc electric

3.5

250-1,500

Anodized Alum.

MSR1.O B 2.5

24 vdc electric

2.5

250-1,000

Anodized Alum.

MSR1.5 B 3.5

24 vdc electric

3.5

250-1,500

Anodized Alum.

MSR1.O H 2.5

Hydraulic

2.5

250-1,000

Anodized Alum.

MSR1.5 H 3.5

Hydraulic

3.5

250-1,500

Anodized Alum.

For US and Foreign Patent and Trademark information, please refer to page IP2

Hydro-Chem Technology
The most effective method for extinguishing large pressure and flowing fuel fires.*
By using foam solution as the means to propel, Hydro-Chem Systems project dry chemical approximately three to four
times farther than that of conventional dry chemical equipment. Hydro-Chem technology gives the firefighter a safer and
more efficient integrated system of delivering dry chemical onto large pressure and flowing fuel fires.
In operation, ground fires are extinguished using foam only. The foam solution applied then ties-up or harnesses the
three dimensional fire, greatly reducing flame intensity. After this reduction in heat, dry chemical is then injected into the
foam stream, resulting in a more proficient extinguishment of the fire. Each system is used in conjunction with customerprovided dry chemical storage equipment.

*Not normally intended for use on liquefied petroleum gas fires.

For US and Foreign Patent and Trademark information, please refIP2

Hydro-Chem Nozzle
Product:
HC Ranger-Automatic Hydro-Chem Nozzle
Description:

The Hydro-Chem Ranger Nozzle combines the effective range


of an automatic nozzle, while incorporating the dry chemical/foam solution delivery capabilities of Hydro-Chem Technology. Designed to
extinguish three dimensional and oxygenated fuel fires. This unique
nozzle projects dry chemical (@ 20 lbs./sec.) through the center of the
foam/water stream, resulting in an effective range not possible with conventional dry chemical equipment. The constant pressure feature assures
maximum effective reach of the foam/water solution. The tip pressure
is automatically controlled to maintain a constant pressure (100 psi
+/- 10%) over the nozzle flow range, which is from 250 gpm to 1,500
gpm. The discharge pattern is adjustable from full fog to straight stream.
Constructed of anodized aluminum, with wrap-around control handle and
protective rubber bumper. Foam solution/water inlet is available in nickel
plated brass as an option. Nozzle is used in conjunction with an independent foam proportioning and dry chemical delivery system.

Basic Model# *

Nozzle Pattern
Control

Water Solution Inlet*

Solution Rate (GPM)

Material of
Construction

HCR1.O M 2.5

Manual

2.5

250-1,000

Anodized Alum.

HCR1.5 M 3.5

Manual

3.5

250-1,500

Anodized Alum.

HCR1.O A 2.5

12 vdc electric

2.5

250-1,000

Anodized Alum.

HCR1.5 A 3.5

12 vdc electric

3.5

250-1,500

Anodized Alum.

HCR1.O B 2.5

24 vdc electric

2.5

250-1,000

Anodized Alum.

HCR1.5 B 3.5

24 vdc electric

3.5

250-1,500

Anodized Alum.

HCR1.O H 2.5

Hydraulic

2.5

250-1,000

Anodized Alum.

HCR1.5 H 3.5

Hydraulic

3.5

250-1,500

Anodized Alum.

*Refer to page D14 for complete part# and ordering information


For US and Foreign Patent and Trademark information, please refer to page IP2

Hydro-Chem Nozzles
Product:
Handgun Hydro-Chem Variable Flow Nozzle
Description:

Dual-agent pistol grip handline nozzle incorporates a foam solution or water application with simultaneous Hydro-Chem Technology
which projects dry chemical through the center of the foam/water stream
to achieve ranges not possible with conventional equipment. Used in conjunction with a separate foam proportioning system.
The foam/water stream is adjustable from full fog to straight stream.
Collar mounted ring adjustment allows quick selection of 60, 95 or 125
gpm flow rates also features a flush setting. The nozzle features separate flow valves for water/foam and dry chemical operations. Constructed
of hard anodized aluminum alloy. Total nozzle weight 7 lbs.

Options Include:
Three inlet valved dry chemical inlet manifold (not shown); flat lay
dry chemical inlet hose, 1.5 x 50, coupled 1.5 (M) NH; cross-over
adapter (for Ansul 350 lb wheeled unit) 1.25 (F) NPSH X 1.5 (M) NH

NOTE: 1.0 NH (F) Swivel connections also available for


water/foam and dry chemical

* Varies depending on dry chemical delivery system and


length of hose lay
For US and Foreign Patent and Trademark information,
please refer to page IP2

Part #
Water/Foam Flow

HCHG-S
60, 95, 125 gpm

Dry Chemical Flow*

5, 7.5, 10 lbs / sec

Water/Foam Solution
Inlet NH (F)

1.5 Swivel NH (F)

Dry Chemical Inlet

1.5 Swivel NH (F)

Ranger AUTOMATIC NOZZLE


HF / HC / MS PART NUMBERING SYSTEM
R
VERSION:
HF HC MS -

Hydro-Foam
Hydro-Chem (1.5 (F)NPT CHEMICAL INLET STD.)
MASTER STREAM

FLOW RANGE:
1.0
250-1000 USGPM - Automatic
1.5
250-1500 USGPM - Automatic
X
Special - Fixed Flow or Automatic
(Requires Engineering Approval - Specify As Option)
PROPORTIONING METHOD:
N
None (Required for HC & MS Versions)
F
Fixed Rate (HF Only)
S
Selectable Rate (HF Only)
J
Jet Pump (HF Only - Requires Engineering Approval Limited to 750 GPM for 3% Proportioning)
PROPORTIONING RATE:
0
None (Required for HC & MS Versions)
.5
.5% (Fixed Only) (1 MNPT Foam Inlet Std)
1
1% (Fixed), .5% (Selectable) (1.5 MNPT Foam Inlet Std)
3
3% (Fixed), 1-3% (Selectable) (2 MNPT Foam Inlet Std)
X
Special (Requires Engineering Approval)
PATTERN CONTROL:
M
Manual
A
12VDC Actuated
B
24VDC Actuated
H
Hydraulic
X
Special
INLET CONNECTIONS:
2.5
2.5 FNST (Standard on 1.0 Flow Range)
3.5
3.5 FNST (Standard on 1.5 Flow Range)
64
64MM (2.5) FBSP
89
89MM (3.5) FBSP
X
Special (Requires Engineering Approval)
OPTIONS:
0
1
2
3
4
5
6
7
A
F
X

None
90 Swivel w/1.5 FNPT Foam/Chemical Inlet Port (Not recommended for HF1.5)
90 Swivel w/1.5 FNST Swivel Foam/Chemical Inlet Port (Not recommended for HF1.5)
Nickel Plated Brass Inlet Nut in Lieu of Standard Anodized Aluminum
Straight 1.5 FNST Swivel Foam/Chemical Inlet Port (Not recommended for HF1.5)
Straight 1.5 FNPT Rigid Foam/Chemical Inlet Port (Standard on HC - Not recommended for HF1.5)
Male Cam-Lock Foam/Chemical Inlet Port (Same as Standard Size for Nozzle Configuration)
Manual ON/OFF 1-3% Metering Valve
Automatic w/Maximum Flow Stop (Requires Engineering Approval)
Fixed Flow Maximum Stop Non-Automatic (Requires Engineering Approval)
Special (Requires Engineering Approval)

NOTE:
All X Selections Require Engineering Approval Prior to Ordering
A Detailed Description Must be Provided When Placing Order

Monitor Nozzles
Product:
Monitor Nozzle - BTM Series
Description:

Standard industrial grade master stream nozzle. Fully adjustable from


straight stream to full fog. Cast brass construction. Standard flow rates of 350,
500, and 700 gpm at 100 psi nozzle pressure. As an option, nozzle can be factory modified to any flow between 100 to 700 gpm at 100 psi (i.e. any K Factor
between 10 and 70). Abbreviated style cast control handles. Standard jam nut
locks foam or water stream at desired pattern. 2.5 NH (F) rigid inlet.

Model

Flow @100 psi

K-Factor

Inlet

Range Straight
Stream

Material

BTM-350

350

35

2.5 NH (F)

150 ft.

Cast Brass

BTM-500

500

50

2.5 NH (F)

190 ft.

Cast Brass

BTM-700

700

70

2.5 NH (F)

200 ft.

Cast Brass

Monitor Nozzles
Product:
Premium Monitor Nozzle - Big Tee
Description:

Premium grade industrial master stream nozzle with exclusive


flush feature. In flush position, nozzle will purge particulates up
to .25 diameter. Fully adjustable from straight stream to full fog.
Large composite rubber covered brass handles for positive stream
control. All brass construction. Standard flow rates are 350 and
500 at 100 psi nozzle pressure.

Model

Flow @100 psi

K-Factor

Inlet

Range Straight
Stream

Material

BT-350

350 gpm

35

2.5 NH (F) Swivel

135 ft.

Cast Brass

BT-500

500 gpm

50

2.5 NH (F) Swivel

150 ft.

Cast Brass

Monitor Nozzles
Product:
High Volume Monitor Nozzle - WBB Big Boy
Description:

High-volume, industrial-grade, master stream nozzle. Fully adjustable from straight stream to full fog. Cast brass construction. Standard
flow rates of 750, and 1000 gpm at 100 psi. Abbreviated style cast
control handles. Standard jam nut locks foam or water stream at desired
pattern. Available with either 2.5 or 3.5 NH (F) inlet.

Model

Flow @100 psi

K-Factor

Inlet(s)

Range Straight
Stream

Material

WBB-750

750 gpm

75

2.5 / 3.5 NH (F)

175 ft.

Cast Brass

WBB-1000

1000 gpm

100

2.5 / 3.5 NH (F)

200 ft.

Cast Brass

Hydro-Foam Nozzles
Product:
Hydro-Foam Monitor Nozzles
Small Body LW Series
Description:

Patented water powered nozzle system that proportions and delivers


either water or foam to the hazard area. Fully adjustable from straight
stream to full fog with flows of 150 or 225 gpm. Brass construction with
stainless steel trim. Foam is proportioned directly from an atmospheric
source at 1%, 3% or 6%.

Model #
Flow
Hydro-Foam @100psi
Nozzle

Range
@100psi
(straight
stream)

Range@100psi
(narrow fog)

Water inlet

Concentrate
inlet

K-factor

Proportioning

Small Body
LW150

150 gpm

110 ft.

60 ft.

1.5NH
(F)swivel

1NPT(M)

15

1%, 3% or 6%

Small Body
LW225

225 gpm

115 ft.

65 ft.

1.5NH
(F)swivel

1NPT(M)

22.5

1%, 3% or 6%

For US and Foreign Patent and Trademark information, please refer to page IP2

Hydro-Foam Nozzles
Product:
Hydro-Foam Monitor Nozzles
Medium Body HF Series - Elkhart
Description:

Patented water powered nozzle system that proportions and delivers either water
or foam to the hazard area. Fully adjustable from straight stream to full fog with
flows of 350 or 500 gpm. Brass construction with stainless steel trim. Nozzle comes
complete with 1 X 8 ft. flexible pick-up hose. Optional 1% or 3% selector provides
dual proportioning capability. Foam concentrate is proportioned directly from an
atmospheric source.

Model #
Hydro-Foam
Nozzle

Flow
@100psi

Range
@100psi
(straight
stream)

Range
@100psi
(narrow fog)

Water
inlet

Concentrate
inlet

K-factor

Proportioning

HF 350

350 gpm

145 ft.

65 ft.

2.5NH
(F)swivel

1NPT(M)

35

1%, 3%

HF 500

500 gpm

155 ft.

75 ft.

2.5NH
(F)swivel

1NPT(M)

50

1%, 3%

Hydro-Foam Nozzles
Product:
Hydro-Foam Monitor Nozzles
Medium Body LW 700
Description:

Patented water powered nozzle system that proportions and delivers


either water or foam to the hazard area. Fully adjustable from straight
stream to full fog with a flow of 700 GPM @100 PSI. Brass construction
with stainless steel trim. 1% or 3% proportioning. Nozzle is supplied with
a 1 x 8 ft. flexible pick-up hose. Foam is proportioned directly from an
atmospheric storage tank.

Model #
Hydro-Foam
Nozzle

Flow
@100psi

Range @100psi
(straight stream)

Water
inlet

Concentrate
inlet

K-factor

Proportioning

Medium Body
LW700

700 gpm

160 ft.

2.5NH
(F)swivel

1NPT(M)

70

1% or 3%

For US and Foreign Patent and Trademark information, please refer to page IP2

Hydro-Foam Nozzles
Product:
Hydro-Foam Monitor Nozzles Medium Body LWNS 350, 500 & 750
Description:

Patented water powered nozzle system that proportions and delivers either
water or foam to the hazard area. Fully adjustable from straight stream to
full fog. Brass construction with stainless steel trim. Flows 350, 500 or 750
gpm @100 psi, with 1% or 3% (6% @ 350 and 500 gpm) proportioning. An
optional 1% / 3% (3% / 6% @ 350 and 500 gpm) selector valve provides dual
proportioning. Foam concentrate is proportioned directly from an atmospheric
storage tank or from a remote foam concentrate supply in conjunction with a
matched Jet Ratio Controller at 1% or 3% only. Nozzle is supplied with 1.5
X 8 ft. flexible pick-up hose.

Model
Hydro-Foam Nozzle

LWNS 350

LWNS 500

LWNS 750

Nominal Flow @100psi

350 gpm

500 gpm

750 gpm

Nominal Range @ 100psi


(straight stream)

135 ft.

150 ft.

160 ft.

Water Inlet

2.5NH (F) Swivel

2.5NH (F) Swivel

2.5NH (F) Swivel

Foam Concentrate Inlet

1.5 NPT(M)

1.5 NPT(M)

1.5 NPT(M)

Proportioning

1% / 3% / 6%

1% / 3% / 6%

1% / 3%

For US and Foreign Patent and Trademark information, please refer to page IP2

Handline Nozzles
Product:
HYDROJET HANDLINE NOZZLES
Viper Select Series
Description:

Superior quality fire fighting handline nozzles. Created from performance data gained through extensive research, as well
as from actual field exposure on a multitude of large fires in anger.
Multiple Gallonage/Constant Flow design.
Compact and Lightweight Design in Extruded E-Lite Alloy.
Molded Composite Rubber Pistol Grip for Precise Control.
Durable Construction Provides Superior Impact Resistance.

Standard Features Include:

Constant Flow feature Allows for use with Matched Foam Eductor.
Factory Installed spinning teeth for Maximum Stream Break-up.
Combination Full Fog to Straight Stream.
Independent Pattern Selection with Indication.
Heavy Duty Rubber Bumper.
Fully Machined Waterway for Flow Efficiency.
Excellent for use with ThunderStorm ATC Foam
Concentrates.
Horseshoe Shutoff Provides Positive Flow Control.
Change Flow without Changing Pattern.
Full Flush Feature.

Model
HydroJet Nozzle

Nominal Flow

Inlet

Length

Weight

SG-3012

30,60,95,125

1.5 NH (F)

8.9

4.25 lbs.

SG-7515

75,100,125,150

1.5 NH (F)

8.9

4.25 lbs.

SG-9520

95,125,150,200

1.5 NH (F)

10.6

6.5 lbs.

Handline Nozzles
Product:
HYDROJET HANDLINE NOZZLES

Viper Select Series

Standard Viper Nozzle


SG-3012
SG-7515

Viper Midrange Nozzle


SG-9520

Air Aspirating Foam Nozzle


Model AFN-1
General Description

Constructed of hard anodized aluminum with stainless steel fasteners


and adjustment rod, this air aspirating foam nozzle offers minimum weight
with durability. Stream pattern is adjustable in the field from an even fan type
to a full straight stream.
Flow rates are specifically tailored to individual protection by the insertion of a pre-engineered stainless steel orifice plate.
Orifice plates can be sized for flows from 250 to 1000 gpm (946 to
3785 Lpm) within K-factors of 35 to 125 based on flowing nozzle inlet pressure. (Monitor friction loss must be deducted from monitor inlet pressure to
use those K-factors.)
Connector is a female swivel, 2.5 7.5 TPI NHT.

Ordering Information
Part No.
400200
400336
400380
400326

Description
AFN-1 Nozzle
AFN-1M Nozzle with Lever Operator
AFN-1-SS Stainless Steel Nozzle
AFN-1M-SS Stainless Steel

AFN-1 Nozzle
48.125
(122.2 cm)

2.5 - 7.5 NHT


Swivel Coupling

4.5 (11.4 cm)


Diameter

Adjustable Control
Rod

Adjustable Jaws

AFN-1 Nozzle
48.125
(122.2 cm)

Lever Operator
Control Rod

2.5 - 7.5 NHT


Swivel Coupling

Nozzle Flow and Range


Pressure
psi
(kPa)
_________
50
(345)
100
(690)
150
(1034)

Flow Rate
gpm (Lpm)
__________
385
(1457)
534
(2021)
656
(2483)

4.5 (11.4 cm)


Diameter

Range at
30 Elev.
ft.
(m)
________
135
(41)
175
(53)
190
(58)

Adjustable Jaws

Range at
22.5 Elev.
ft.
(m)
________
135
(41)
175
(53)
190
(58)

NOTE: Above based on orifice sized for 500 gpm @ 100 psi (1893 Lpm @ 690 kPa).

Range at
15 Elev.
ft.
(m)
________
115
(35)
170
(52)
190
(58)

Range at
0 Elev.
ft.
(m)
________
50 (15)
80 (24)
100 (30)

Air Aspirating Handline Nozzles


Features

Stainless Steel Construction for Use in


Corrosive Environments
Nominal Flow Rates of 60, 95, or 120 gpm
(227, 360, or 454 Lpm)
Compatible with Ansul PL-60, PL-95, and
PL-120 Line Proportioners
Optional Pistol-Grip Shutoff Available
(Anodized Aluminum)
Lightweight, Portable Design for Maximum
Mobility

23.1
(58.7 cm)
19
(48.3 cm)

2.5
(6.4 cm)
19
(48.3 cm)

3
(7.6 cm)

Nozzle
Optional
Shutoff

Application

Ansul (HL) foam handline nozzles can be used with all low expansion foam agents: protein foam, fluoroprotein foam,
and AFFF. These portable, air aspirating nozzles can be used in a variety of flammable liquid hazard areas. Typical applications include use by municipal fire departments and crash-fire-rescue vehicles; or for handline applications around tank farms,
loading racks, aircraft hangars, and chemical plants.

Description

Ansul handline nozzles are available in three sizes (HL-60, HL-95, and HL-120) with or without pistol-grip shutoff. The
nozzles are constructed of stainless steel; the pistol-grip shutoff is anodized aluminum. Lightweight and compact, they maximize fire fighting mobility and ease of use.

Typical Foam Quality/Range Data


Protein/
Fluoroprotein
______

AFFF
____

3%
ARC
_______

Foam
Expansion
Ratio

8:1

10:1

7:1

Drain Time
(25%)

7 min.

3 min.

8 min.

Stream Range
@ 50 psi
(345 kPa)

50 ft.
(15.2 m)

50 ft.
50 ft.
(15.2 m) (15.2 m)

Stream Range
@ 75 psi
(517 kPa)

65 ft.
(19.8 m)

65 ft.
65 ft.
(19.8 m) (19.8 m)

Stream Range
@ 100 psi
(690 kPa)

75 ft.
(22.9 m)

75 ft.
75 ft.
(22.9 m) (22.9 m)

Hose Length/Size Data


Handline Line
Nozzle
Proportioner
_____
__________

Hose
Size
in.
____

Maximum
Hose
Length*
ft.
(m)
________

HL-60
HL-95
HL-120

1.5
1.5
1.5

200
100
100

PL-60
PL-95
PL-120

(61.0)
(30.5)
(30.5)

* Maximum hose length is based on nozzle being elevated a maximum of 8 ft. (2.4 m) above line proportioner.

Ordering Information

The models listed below are provided with 1.5 NHT female inlet threads. Other thread types are available upon request.
The flow rates listed are nominal; see Flow Rate Data for actual flow rates based on inlet pressure.

Part
No.

Description

Approx
Shipping
Weight
lb. (kg)

Part
No.

Description

Approx
Shipping
Weight
lb. (kg)

Part
No.

Description

Approx
Shipping
Weight
lb. (kg)

77796* HL-60 Nozzle


without Shutoff,
60 gpm (227 Lpm)

(2.3)

77797* HL-95 Nozzle


without Shutoff,
95 gpm (360 Lpm)

(2.3)

77981

HL-120 Nozzle
without Shutoff,
120 gpm (454 Lpm)

(2.3)

77792* HL-60S Nozzle


with Shutoff,
60 gpm (227 Lpm)

(3.2)

77793* HL-95S Nozzle


with Shutoff,
95 gpm (360 Lpm)

(3.2)

78419

HL-120S Nozzle
with Shutoff,

(3.2)

Air Aspirating Handline Nozzles

INLET PRESSURE

Flow Rate Data


(kPa)
____

psi
___

(1034)

150

(827)

120

(690)

100

(621)

90

(552)

80

(483)

70

(414)

60

(345)

50

(276)

40

40
(151)

HL-60

50
(189)

60
(227)

70
(265)

80
90 100
(303) (341) (379)

HL-95 HL-120

120
(454)

150 gpm
(568) (Lpm)

FLOW RATE
001224

Foam Nozzles
Product:
Foam Wand
Description:

The Foam Wand is designed to expand and deliver foam into remote/
hazardous areas where either logistics or safety considerations dictate that
the foam nozzle be unattended. The wand delivers high quality foam
onto hard-to-access flammable liquid fires. Flow rate is 95 gpm @ 100
psi (K=9.5). Works in conjunction with a standard 95 gpm inline eductor or other foam proportioning system. Nominal foam expansion is 4:
1. Assembly includes 1.5 NH (F) brass swivel
foam solution inlet; carbon steel distribution piping; foam nozzle; detachable horizontal standoff, canvas carrying case.

Typical Application
Foam Wand assembly

Model
Foam Wand

Nominal Flow
@ 100 PSI

K-factor

Inlet

Body

95 gpm

95 gpm

9.5

1.5 NH(F) Swivel

Schedule 40
Carbon Steel

Balanced Pressure Proportioning Systems


Product:
Spectrum Bladder Tanks-Horizontal Configuration
Description:

Spectrum Horizontal Bladder tanks provide dependable and cost


effective foam fire protection for a wide variety of flammable/combustible
liquid hazards. Used in conjunction with either one, or multiple ratio flow
controllers (installed adjacent to the tank), the all-hydraulic balanced pressure proportioning system stores, delivers and proportions foam without
dependence on external foam concentrate pumping. Only water under
pressure is required for system operation.
The Spectrum Horizontal Bladder Tank is a cylindrical carbon steel
ASME pressure vessel containing a flexible polymeric elastomer inner bladder which encapsulates the foam concentrate. This
bladder physically separates stored foam concentrate from the water supply. When the system is activated, water is directed
into the tank shell, which then pressurizes the space between the flexible bladder and the interior tank wall. This water pressure causes the bladder to collapse, which then dispenses foam concentrate out through distribution piping and (ultimately)
into the ratio controller(s). The ratio controllers modified venturi creates a metering pressure drop in the fire water line,
allowing foam concentrate to pass through a fixed orifice plate and enter the fire water piping at the designated proportioning
rate. In installations where the bladder normally is under pressure (wet pipe, reaction, or when the deluge valve is downstream
from the ratio controller), a normally-closed actuated concentrate valve (electric or hydraulic) isolates the foam concentrate
until energized. Interior/exterior finished in red enamel.

Standard Spectrum Bladder tank trim includes:


1. ASME Code Pressure Vessel
2. Flexible Concentrate Bladder
3. Shell Side (water) Vent Valve
4. Bladder (concentrate) Vent Valves
5. Shell Side (water) Fill/Drain Valve
6. Bladder (concentrate) Fill/Drain Valve
7. Water Balancing Nozzle (screened)
8. Vessel Skirt with Anchors
9. Concentrate Discharge Pipe, Perforated
10. Concentrate Discharge Nozzle
11. Lifting Lugs included (not shown)

Spectrum Bladder Options:


12. Sight Gauge Assembly
13. Epoxy Interior/Exterior Finish (For use in
marine or corrosive environments)
14. Pressure Relief Valve (Not Shown)

Horizontal Bladder Tank


Tank Size

Saddle
Width

Gal.

(L)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

in.

(cm)

100

(379)

16.0

(41)

32

(81)

35.5

(90)

0.75

(1.9)

(13)

10

(25)

18

(46)

0.63

(1.6)

(7.6)

150

(568)

18.0

(46)

36

(91)

35.0

(89)

0.75

(1.9)

(20)

16

(41)

24

(61)

0.63

(1.6)

(7.6)

200

(757)

20.0

(51)

40

(101)

44.0

(112)

0.75

(1.9)

(20)

16

(41)

24

(61)

0.63

(1.6)

(7.6)

300

(1136)

21.0

(53)

42

(107)

46.0

(117)

0.75

(1.9)

11

(28)

22

(56)

30

(76)

0.63

(1.6)

(7.6)

400*

(1514)

21.0

(53)

40

(107)

44.5

(113)

0.75

(1.9)

14

(36)

28

(71)

36

(91)

0.75

(1.9)

(10.2)

400

(1514)

17.12

(43)

34.25

(87)

36.5

(93)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

500*

(1893)

24.0

(61)

48

(122)

53.0

(135)

0.75

(1.9)

14

(36)

28

(71)

36

(91)

0.75

(1.9)

(10.2)

500

(1893)

20.62

(52)

41.25

(105)

43.0

(109)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

600

(2271)

22.5

(57)

45

(114)

49.5

(126)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

700

(2650)

26.0

(66)

52

(132)

56.5

(144)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

800

(3028)

30.62

(78)

61.25

(156)

63.5

(161)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

800*

(3028)

24.0

(61)

48

(122)

52.2

(133)

0.88

(2.2)

20

(51)

40

(102)

48

(122)

1.0

(2.5)

(10.2)

900

(3407)

34.12

(87)

68.25

(173)

70.5

(179)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

0.88

(2.2)

(10.2)

900*

(3407)

26.0

(66)

52

(132)

57.7

(147)

0.88

(2.2)

20

(51)

40

(102)

48

(122)

1.0

(2.5)

(10.2)

1000

(3785)

37.62

(96)

75.25

(191)

77.5

(197)

0.88

(2.2)

17

(43)

34

(86)

42

(107)

1.0

(2.5)

(10.2)

1000*

(3785)

28.0

(71)

56

(142)

63.2

(160)

0.88

(2.2)

20

(51)

40

(102)

48

(122)

1.0

(2.5)

(10.2)

1100

(4164)

28.0

(71)

56

(142)

60.0

(152)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1200

(4542)

30.5

(78)

61

(155)

64.5

(164)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1300

(4921)

32.5

(83)

65

(165)

69.0

(175)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1400

(5299)

35.0

(89)

70

(178)

73.5

(187)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1500

(5678)

37.0

(94)

74

(188)

78.0

(198)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1600

(6057)

39.5

(100)

79

(201)

88.0

(234)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1700

(6435)

42.0

(107)

84

(213)

87.5

(222)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1800

(6814)

44.0

(112)

88

(224)

92.0

(233)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

1900

(7182)

46.5

(118)

93

(236)

96.5

(245)

0.88

(2.2)

23

(58)

46

(117)

54

(137)

1.0

(2.5)

(10.2)

2000

(7571)

36.0

(91)

72

(183)

72.2

(183)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

2200

(8328)

39.0

(99)

78

(198)

81.7

(208)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

2400

(9085)

42.5

(108)

85

(216)

88.2

(224)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

2600

(9842)

45.5

(116)

91

(231)

94.7

(241)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

2800

(10599)

48.5

(123)

97

(246)

100.7

(256)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

3000

(11356)

52.0

(132)

104

(264)

107.2

(272)

0.88

(2.2)

29

(74)

58

(147)

66

(168)

1.0

(2.5)

(10.2)

*To be phased out after June 1996.

B
C

F
G

Foam Concentrate Tanks


Product:
Vertical Polyethylene Storage Tanks
Description:

Atmospheric High Density, Cross-Linked Polyethylene Storage Tanks are


an industry standard for storing foam concentrate. They are typically used in
conjunction with pumped balanced pressure systems or self-educting HydroFoam monitor stations. Polyethylene is an exceptionally stable and durable
material when used to store foam concentrates. These rotationally molded,
corrosion/impact resistant upright tanks are available in nominal storage
capacities ranging from 55 to 12,000 gallons.

Bill of Materials

Vertical
Poly Tank

Pressure Vacuum Vent.

PVC Bulkhead Fitting.

10 Threaded Inspect Hatch (tank sizes


up to 400 gallons).

19 Bolted Manway (tank sizes >400 gallons).

Top Mounted Fill Connection with PVC


Drop Tube (option).

Liquid Level Indication-Molded.

Tank Drain/Fill Fitting, Stainless Steel


Valved.

Pump Supply Fittings, Stainless Steel


with Siphon Pickup.

Return Fitting, Stainless Steel with


Siphon Discharge.

10

Fittings (only) for tank liquid level contacts.

Material

Pigments,
Vapor Space

Fittings

Fittings,
Liquid Space

Liquid Level
Indication

High Density
Cross Linked
Polyethylene

<0.5% by weight

PVC or Stainless
Steel

Stainless Steel

Molded into side


of (translucent)
tank

Foam Concentrate Tanks


Vertical Polyethylene Storage Tanks- Dimensional Data
Nominal Vessel
Size in Gallons

Capacities
Str. Wall

Capacities
Total

Diameter

Height

Wall Thickness
(bottom third)

Weight
(less fittings)

Top
Opening

55

55

55

1 11

3 5

.250

35#

10

100

100

100

1 1

5 4

.250

55#

10

150

150

150

2 7

4 6

.250

67#

10

200

200

200

2 7

5 10

.250

70#

10

300

300

300

3 10

4 4

.250

90#

10

305

305

305

2 10

6 10

.250

90#

10

400

400

400

3 10

.250

120#

10

525

497

557

5 4

3 10

.250

185#

19

550

550

574

6 7

.250

187#

19

800

798

822

9 6

.250

200#

19

805

805

865

5 4

5 10

.250

200#

19

1000

929

988

5 4

6 8

.313

205#

19

1100

1025

1178

7 1

4 6

.250

190#

19

1200

1156

1215

5 4

.313

260#

19

1450

1325

1475

7 1

.313

280#

19

1500

1458

1518

5 4

9 10

.344

300#

19

2000

1722

1945

5 11

.313

300#

19

2500

2286

2508

7 4

.375

390#

19

3000

2755

2977

8 9

.359

470#

19

4000

3955

4159

7 10

12 5

.500

720#

24

4250

4120

4407

8 6

11 3

.500

795#

19

4300

4274

4905

11 11

6 9

.375

1025#

24

5000

5038

5241

7 10

15 7

.656

1170#

24

5500

5154

5509

9 2

13

.594

950#

24

5500

5153

5508

9 2

12 7

.594

950#

24

6400

6056

6424

10

12

.500

960#

24

6800

6835

7466

11 11

10

.625

1610#

19

7000

7089

7665

10

14 3

.734

1310#

19

8000

8317

8947

11 11

11 8

.703

1650#

24

10000

10120

10750

11 11

14

.906

2445#

24

12000

12324

1294

11 11

16 8

1.047

3150#

24

Foam Concentrate Tanks


Product:
Horizontal Polyethylene Storage Tanks
Description:

Atmospheric High Density, Cross-Linked Polyethylene


Storage Tanks are an industry standard for storing foam concentrate. They are typically used in conjunction with transportable foam trailers, pumped balanced pressure systems or
self-educting Hydro-Foam monitor stations. Polyethylene
is an exceptionally stable and durable material when used
to store foam concentrates. These rotationally molded,
corrosion/impact resistant horizontal/cylindrical tanks are
available in sizes ranging from 110 gallons to 2,500 gallons. Tanks are mounted on carbon steel support saddles and
secured with support bands.

Bill of Materials

Horizontal Poly
Tank

Pressure Vacuum Vent.

PVC Bulkhead Fitting.

10 Threaded Inspect Hatch (tank sizes <


1000 gallons).

19 Bolted Manway (tank sizes >1000 gallons).

Top Mounted Fill Connection with PVC Drop


Tube (option).

Liquid Level Indication-Molded.

Tank Drain/Fill Fitting, Stainless Steel Valved.

Pump Supply Fittings, Stainless Steel with


Siphon Pickup.

Tank Return Fitting, Stainless Steel with


Siphon Discharge.

10

Tank Return Fitting, Stainless Steel with


Siphon Discharge.

11

Fittings (only) for tank liquid level contacts.

Material

Pigments

Fittings,
Vapor Space

Fittings,
Liquid Space

Liquid Level
Indication

High Density
Cross Linked
Polyethylene

<0.5% by weight

PVC or Stainless
Steel

Stainless Steel

Molded into side of


(translucent) tank

Foam Concentrate Tanks


Horizontal Polyethylene Storage Tanks- Dimensional Data

Tank Configuration A (150-1000 Gallon Capacity)


Nominal
Capacity
(US Gallons)

Diameter

Length

Total
Weight

Fill
Opening

150

2 8

4 10

190

10

200 x 32

2 8

5 8

245

10

200 x 38

3 2

4 4

245

10

300

3 2

6 3

305

10

400

5 3

330

10

500

6 4

350

10

750

4 6

7 1.5

585

10

1000

5 4

7 2

770

10 or 19

Support Saddle A1 - (150-500 Gallon Capacity)


Tank Size

Width

Length

150

31.5

48

200 x 32

31.5

60

200 x 38

37.5

38.5

300

37.5

60

400

48

48

500

48

50

Support Saddle A2 - (750-1000 Gallon Capacity)

Tank Size

Width

Length

750

48.5

65

1000

57

60

Foam Concentrate Tanks


Horizontal Polyethylene Storage Tanks- Dimensional Data
Tank Configuration B (1025-2500 Gallon Capacity)

Nominal Capacity
(US Gallons)

Diameter

Length

Total Weight

Fill Opening

1025

12 4

1065

19

1625

5 4

11 3

1433

19

2000

5 4

13 1

1550

19

2500

5 4

15 11

1942

19

Support Saddle B

Tank Size

Width

Length

1025

3 8.75

9 10

1625

4 10

9 3

2000

4 10

10

2500

4 10

14 6

Foam Systems - Around The Pump Eductors


Product:
Spectrum ATP Eductors, 2 & 3 - Grooved Type
Description:

The Spectrum Around The Pump Eductor is a fundamental, economical, yet proven way to produce foam on a fire truck. In operation a
portion of the fire water discharge is diverted to the eductor. The eductor picks up foam concentrate from the on-board atmospheric foam tank
and delivers it to the suction side of the water pump. A metering valve
such as the Spectrum Multiport Metering Valve controls the amount of
concentrate entering the system. This, along with the rate of discharge,
determines the solution flow rate; typically from 1% to 6%. All discharges in this type of system will produce foam solution. Eductors are
constructed of brass to provide years of trouble free service.

7.5

10

3.875

5.0625

2.8125

2.6875

2.625

3.3125

1.5

10

15

*Minimum straight pipe lengths


required upstream of controller

Minimum Operating Pressure = 75 psi


Maximum Operating Pressure = 225 psi
Maximum
Proportioning
Rates (gpm)

Part #

Ratio
Controller Size

Configuration

Nominal
Concentrate Flow

Drive Water
Flow @ 200 psi

3%

6%

2.0EDCT-75

Grooved

75 gpm

2500

1250

85 gpm

3.0EDCT-150

Grooved

150 gpm

5000

2500

150 gpm

Foam Systems - Multi Port Metering Valve


Product:
Spectrum Multi-Port Metering Valve Air Actuated
Description:

The Spectrum Multi-Port Metering Valve offers the simplicity


and reliability of fixed orifice metering coupled with the flexibility
of eight (8) air actuated ports. The valve can be custom configured
to have from 1 to 8 ports. Each port can be selected to meter solution flows from 30 gpm @ 3% up to 750 gpm @ 6%. Each orifice
can easily be removed, replaced, added or changed in the field.
Each active port features a single acting spring loaded air actuator.
This air actuator features a manual over-ride that will allow the
system to manually function in the event of air system loss. The
construction is Red Brass with Stainless Steel trim and positive
rubber valve seats.

This valve is used in conjunction with the proper Spectrum


Eductor in an Around The Pump (ATP) Foam System. Primarily
used in Airport Crash Trucks, this system offers economic reliability. As each discharge is opened an air signal is sent to the associated metering valve port. As each valve opens, more
predetermined amounts of concentrate enter the system to maintain either a 1, 3 or 6% proportioning rate.

Maximum Positive Pressure Rating is 25 psig


Part #

Description

MVM01

Valve Body & Orifice Plate

Bronze

MVM02

Air Actuated Valve

Bronze

Orifice Insert

Brass

*MVM03-(Port#)-(Diameter)
*Contact Factory for Orifice Sizing

Material

Foam Systems- Balanced Pressure Components


Product:
Spectrum Ratio Controllers, 2 & 2.5 -Threaded Type
Description:

Ratio Controllers are modified venturi foam proportioners that


accurately meter pressurized foam concentrate into the firewater stream.
These foam proportioners are used in conjunction with balanced pressure systems, such as bladder tanks and pumped proportioning skids. In
operation, firewater flows through the modified venturi, creating an area
of lower pressure, which is referred to as the metering pressure drop.
This metering pressure drop is directly effected by the firewater velocity
as it flows through the venturi. The (1%, 3% or 6%) concentrate-to-water
ratio is maintained over the entire flow range of each size ratio controller. However, each size ratio controller has a minimum flow rate/velocity
requirement, and these minimums must be maintained for proper ratio
controller operation.
Each Spectrum Ratio Controller consists of the following components: body; metering orifice; inlet nozzle. These components are constructed of ASTM 85-5-5-5 bronze. The inlet nozzle
is tapered and machined to a smooth finish to maximize water stream efficiency through the venturi. The foam concentrate
metering orifice is sized to the exact type and percentage of foam concentrate to be used. Both the inlet nozzle and metering
orifice are secured by a stainless steel retaining ring.

2.5

2.375

2.875

2.0625

2.0625

3.75

4.125

10

13

*Minimum straight pipe lengths


required upstream/downstream of
controller.

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning
(Fixed)

Concentrate Inlet

Threaded

80-200 gpm

40-200 gpm

1%/3%/6%

1NPT (M)

2.5

Threaded

160-500 gpm

80-500 gpm

1%/3%/6%

1NPT (M)

Foam Systems- Balanced Pressure Components


Product:
Spectrum Ratio Controllers, 5 Grooved
Description:

The Spectrum 5 Grooved Ratio Controller is a modified


venturi foam proportioner that accurately meters pressurized foam
concentrate into the firewater stream. This foam proportioner is
used in conjunction with balanced pressure systems, such as bladder tanks and pumped proportioning skids. In operation, water
flows through the modified venturi, creating an area of lower pressure, which is referred to as the metering pressure drop. This
metering pressure drop is directly effected by the firewater velocity
as it flows through the venturi. The (1%, 3% or 6%) concentrateto-water ratio is maintained over the entire flow range of the ratio
controller. However, each size ratio controller has a minimum flow
rate/velocity requirement, and these minimums must be maintained
for proper ratio controller operation.

The Spectrum Ratio Controller consists of the following components: body; metering orifice; inlet nozzle. These components are constructed of ASTM 85-5-5-5 bronze. The inlet nozzle is tapered and machined to a smooth finish to maximize
water stream efficiency through the venturi. The foam concentrate metering orifice is sized to the exact type and percentage
of foam concentrate to be used. Both the inlet nozzle and metering orifice are secured by a stainless steel retaining ring.

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning
(Fixed)

Concentrate Inlet

Victaulic or
Gruv-Lok

400-1800 gpm

200-1800 gpm

1%/3%/6%

2NPT (F)

Foam Systems- Balanced Pressure Components


Product:
Spectrum Ratio Controllers, 3,4,6,8- Wafer Style
Description:

Spectrum Ratio Controllers are modified venturi foam proportioners


that accurately meter pressurized foam concentrate into the firewater stream.
These foam proportioners are used in conjunction with balanced pressure
systems, such as bladder tanks and pumped proportioning skids. In operation, firewater flows through the modified venturi, creating an area of lower
pressure, which is referred to as the metering pressure drop. This metering
pressure drop is directly effected by the firewater velocity as it flows through
the venturi. The (1%, 3% or 6%) concentrate-to-water ratio is maintained
over the entire flow range of each size ratio controller. However, each size
ratio controller has a minimum flow rate/velocity requirement, and these
minimums must be maintained for proper ratio controller operation.

Designed to be installed between two 150# F.F. flanges, each Spectrum


Ratio Controller consists of the following components: body; metering orifice; inlet nozzle. These components are constructed of ASTM 85-5-5-5
bronze. The inlet nozzle is tapered and machined to a smooth finish to maximize water stream efficiency through the venturi.
The foam concentrate metering orifice is sized to the exact type and percentage of foam concentrate to be used. Both the inlet
nozzle and metering orifice are secured by a stainless steel retaining ring. F.M. approved, File No. J.I.1R6A3.AF.

2.375

2.5

3.25

3.5

6.0625

12

12

2.625

3.125

4.125

5.25

1.25

1.5

2.5

E*

15

20

30

40

WEIGHT

10 lbs.

16 lbs.

32 lbs.

3 lbs.

*Minimum straight pipe length required upstream/


downstream of controller.

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning
(Fixed)

Wafer, Between Flange

200-700 gpm

100-700 gpm

1%/3%/6%

Wafer, Between Flange

300-1250 gpm

175-1250 gpm

1%/3%/6%

Wafer, Between Flange

500-2500 gpm

350-2500 gpm

1%/3%/6%

Wafer, Between Flange

950-4500 gpm

700-4500 gpm

1%/3%/6%

Foam Systems- Balanced Pressure Components


Ratio Controller Detail

Threaded - 2 and 2.5

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning
AFFF Flow

Concentrate Inlet

Threaded

80-200 gpm

40-200 gpm

1% / 3% / 6%

1 NPT (M)

2.5

Threaded

160-500 gpm

80-500 gpm

1% / 3% / 6%

1 NPT (M)

Grooved - 5

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning
AFFF Flow

Concentrate Inlet

Victaulic or
Gruv-Lok

400-1800 gpm

200-1800 gpm

1% / 3% / 6%

2 NPT (F)

Wafer Style - 3, 4, 6, 8

Ratio
Controller Size

Configuration

Nominal
ATC Flow

Nominal
AFFF Flow

Proportioning

Wafer, Between Flange

200-700 gpm

100-700 gpm

1% / 3% / 6%

1.25

Wafer, Between Flange

300-1250 gpm

175-1250 gpm

1% / 3% / 6%

1.5

Wafer, Between Flange

500-2500 gpm

350-2500 gpm

1% / 3% / 6%

Wafer, Between Flange

950-4500 gpm

700-4500 gpm

1% / 3% / 6%

2.5

Foam Systems Components


Product:
Hydraulically Actuated Foam Concentrate Control ValveStandard Port Waterway
Description:

The Spectrum Standard Port Hydraulically Actuated Foam Concentrate Control


Valve is typically installed in the concentrate piping between the foam concentrate
storage tank and ratio controller (proportioner). When used in a balanced pressure
proportioning system, as well as most other foam concentrate applications, the valve
position is normally closed, preventing foam concentrate from entering into the
ratio controller. Upon system actuation, the valve will automatically open, supplying
foam concentrate to the specific (flowing) ratio controller.

Actuator Features

Operating Medium- Water


Connections-.25 (F) NPT
Seal Material- O-Rings, Buna-N
Rotational Arc, Max- 94 degrees
Max Operating Pressure- 175 psi
Position Indicator with Manual Override

Installation/Operation

The actuator is opened by introduction of system water pressure, and (therefore) requires no electrical power for operation. In most installations system water pressure is supplied to the actuator via .25 I.D. copper tubing, which is typically
connected to the trim of an automatic system valve (deluge, dry pipe, preaction).

Valve Features

Ball valve, quarter-turn type with mounting pad.


600 psi WOG, cold, non-shock
Threaded NPT (F) both ends.
Reinforced TFE seats and stuffing box.
Bronze body (standard) with stainless steel ball.

Std. Port
Model No.

Valve
Size

Waterway
(port)
Diameter

Minimum
Pressure
(actuator)

HBVS-1.0

.875

25 psi

3.625

2.5

4.625

3.25

10.125

HBVS-1.25

1.25

40 psi

3.625

2.5

4.875

10.375

HBVS-1.5

1.5

1.25

50 psi

3.625

2.5

4.375

10.625

HBVS-2.0

1.5

60 psi

3.625

2.5

5.125

4.6875

10.875

Foam Systems Components


Product:
Hydraulically Actuated Foam Concentrate Control ValveFull Port Waterway
Description:

The Spectrum Full Port Hydraulically Actuated Foam Concentrate Control


Valve is typically installed in the foam concentrate piping between the foam concentrate storage tank and ratio controller (proportioner). When used in a balanced pressure proportioning system, as well as most other foam concentrate applications, the
valve position is normally closed, preventing foam concentrate from entering into
the ratio controller. Upon system actuation, the valve will automatically open, supplying foam concentrate to the specific (flowing) ratio controller.

Actuator Features

Operating Medium- Water


Connections-.25 (F) NPT
Seal Material- O-Rings, Buna-N
Rotational Arc, Max- 94 degrees
Max Operating Pressure- 175 psi
Position Indicator with Manual Override

Valve Features

Ball valve, quarter-turn type with mounting pad.


600 psi WOG, cold, non-shock
Threaded NPT (F) both ends.
Reinforced TFE seats and stuffing box.
Bronze body (standard) with stainless steel ball.

Installation/Operation

The actuator is opened by introduction of system


water pressure, and (therefore) requires no electrical
power for operation. In most installations system water
pressure is supplied to the actuator via .25 I.D. copper
tubing, which is typically connected to the trim of an
automatic system valve (deluge, dry pipe, preaction).

Std. Port
Model No.

Valve
Size

Waterway
(port)
Diameter

Minimum
Pressure
(actuator)

HBVF-1.0

50 psi

3.625

2.5

3.625

10.375

HBVF-1.25

1.25

1.25

60 psi

3.625

2.5

5.125

4.25

10.625

HBVF-1.5

1.5

1.5

75 psi

3.625

2.5

5.375

4.75

10.9375

HBVF-2.0

130 psi

3.625

2.5

5.625

5.375

11.375

Foam Systems Components


Product:
Electrically Actuated Foam Concentrate Control ValveStandard Port Waterway
Description:

The Spectrum Standard Port Electrically Actuated Foam Concentrate


Control Valve is typically installed in the foam concentrate piping between the
foam concentrate storage tank and ratio controller (proportioner). When used
in a balanced pressure proportioning system, as well as most other foam concentrate applications, the valve position is normally closed, preventing foam
concentrate from entering into the ratio controller. Upon system actuation, the
valve will automatically open, supplying foam concentrate to the specific (flowing) ratio controller.

Actuator Features

Unidirectional through shafted design.


Manual override, with valve position indicator.
Permanently lubricated fully closed gear train.
Water tight NEMA 4 enclosure.
Prewired terminal strip.
Maximum current requirements for open position
control - 11 amp @ 115V- 15 amp @ 24VDC.
AC Voltages- (50 or 60 Hz), 24, 115, 220V.
DC Voltages - 12, 24V.

Valve Features

Ball valve, quarter-turn type with mounting pad.


600 psi WOG, cold, non-shock
Threaded NPT (F) both ends.
Reinforced TFE seats and stuffing box.
Bronze body (standard) with stainless steel ball.

Standard Port
Model No.

Valve Size Waterway


(port)
Diameter

Standard
Voltage

EBVS-1.0

.875

24 VDC

3.375

8.75

EBVS-1.25

1.25

24 VDC

4.25

9.125

EBVS-1.5

1.5

1.25

24 VDC

4.75

9.375

EBVS-2.0

1.5

24 VDC

5.375

9.75

Williams Flow Solution

Low Pressure Drop / Wide-Range Proportioner


The Williams Flow Solution Proportioner Redefines Accurate/ Wide Range Balanced Pressure Foam
Proportioning and Control!
The Williams Flow Solution has been developed to
address the Special Hazards Fire Protection Industrys need
for an accurate wide-flow balanced pressure foam propor
tioner which incorporates both low and constant pressure loss
with minimum water inlet pressure throughout its entire flow
range. In addition, these features are integrated into an assem
bly, which also includes precise water and foam concentrate
control. The Flow Solution proportioner is configured as
an assembly which consolidates the following system com
ponents: ratio controller; water control valve and (optional)
foam concentrate control valve with integral concentrate
check valve. Specifically suited for all closed head and
deluge foam sprinkler systems including auxiliary handline
discharges, the Flow Solution proportioners revolutionary
design provides the following features:
Low, 8 PSI (nominal) Constant Pressure Loss
Throughout Entire Flow Range.
Wide Flow Range of 25gpm to 2500+gpm for Single Sprinkler Head to Total System Activation.
Low Minimum Inlet Pressure Requirement of 25 PSI Across Entire Flow Range
Configurable as Alarm Check or Water Control Valve
Fixed Proportioning of 1% or 3% with External Adjustment to Accommodate a Wide Range
of Foam Concentrate Viscosities.
Convertible 150# ANSI Flange / Grooved Water, Foam & Solution Connections
Nickel Plated Ductile Iron Body with Brass & Stainless Steel Trim

Balanced Pressure Proportioning Systems


Product:
Pump Injection Type, with Ratio Controller on Skid
Description:

The Spectrum Pump Injection Type Balanced Pressure


Proportioning Skid is a completely self-contained system which
automatically proportions foam concentrate over a wide range of
flows and pressures, without manual adjustment. The skid is installed
adjacent to an atmospheric foam concentrate storage tank, and consists of the following major components: positive displacement foam
concentrate pump; electric (or diesel) driver; pump starter/controller;
pressure balancing valve; ratio controller(s); duplex gauge; interconnecting pipe, valves, and fittings. In operation, foam liquid is drawn
from the atmospheric concentrate storage tank and pumped to the
skid-mounted ratio controller. The back-pressure type balancing
valve, installed on the tank return line regulates the amount of foam
concentrate which is returned to the storage tank, and balances the
foam concentrate pressure to match the water pressure at the ratio
controller. Water and foam pressures are monitored by a duplex
pressure gauge. Manual override of the system is accomplished through the use of a manual globe valve, installed in piping
which bypasses the diaphragm control valve. Field connections on the skid are limited to: water inlet to ratio controller; foam
solution discharge from ratio controller; electrical service to the pump motor starter/controller; foam concentrate suction and
return connections to the foam storage tank. All piping connections on the skid are 150# flanges.

Foam Storage Tank

Pump Type

Skid Concentrate
Piping

Ratio Controller
Size(s)

Standard
Proportioning

High Density
Polyethylene

Positive
Displacement

1.5-4

3-8

1% / 3%

Balanced Pressure Proportioning Systems


Product:
Pump Injection Type, with Ratio Controller on Skid

Piping Standard Piping Options Pump Standard Pump Options Standard Pump/Motor -

Schedule 40 Carbon Steel


Brass, Stainless Steel
Ductile Iron, Bronze Fitted
Bronze, Stainless Steel
Open Drip Proof 230 VAC/60/3

Model

Nominal
Solution
Flow ATC
(gpm)

Nominal
Solution
flow AFFF
(gpm)

Ratio
Controller Size
AFFF (gpm)

BPS-3L

200-600

100-600

BPS-3H

200-800

BPS-4

Pump Capacity gpm


(@200 PSI)

Bronze
Stainless Steel
1% or 3%
Limited Service, NEMA II
Enclosure

Horsepower
(pump motor)

Pipe
Size

1%

3%

1%

3%

10

20

1.5

100-800

12

30

7.5

1.5

300-1250

175-1250

15

40

10

1.5

BPS-5

400-1800

200-1800

20

60

15

BPS-6L

500-2200

350-2200

25

70

7.5

20

BPS-6H

600-2500

350-2500

30

80

7.5

25

BPS-8L

950-2900

700-2900

35

90

1.0

25

2.5

BPS-8M

950-3800

700-3800

45

120

10

30

2.5

BPS-8H

950-4500

700-4500

55

140

15

30

2.5

Required Ordering Information:

1.
2.
3.
4.

Valve Standard Valve Options Standard Proportioning Standard Pump Controller -

Tank Capacity/Configuration
Tank Material
Type/Percentage of Foam Concentrate
System Water Pressures (static/residual)
@Ratio Controller(s)

5. Available Power Supply (voltage/cycle/phase)


6. Piping Specification
7. Valve Specification
8. Paint Specification
9. Foam System Flow Rate(s) - Minimum/Maximum
Demand

Balanced Pressure Proportioning Systems


Product:
Inline Balanced Pressure Proportioning Modules
Description:

Spectrum Inline Balanced Pressure Proportioners (ILBPs) comprise a complete foam storage, delivery and proportioning system,
when used in conjunction with properly sized atmospheric foam
tanks, foam pumps, back-pressure control valves and concentrate
distribution piping. When supplied with foam concentrate under
adequate pressure, they are designed to accurately introduce the
foam concentrate into the water stream over a wide range of flows
and pressures by automatically responding to variations in system
demand. ILBPs provide accurate foam concentrate introduction
at either single/local, or multiple/remote system proportioning
location(s). Each ILBP system riser is calculated for system
demand and then equipped with the properly sized proportioner.

InLine Balanced Pressure System Schematic


Operation:

The Inline Balanced Pressure Proportioning System utilizes a foam pump, which pressurizes the distribution piping and
ultimately supplies foam concentrate to each ILBP. Foam concentrate is stored in an atmospheric foam tank. Pumped foam
concentrate that is not delivered to the system is returned to the storage tank via a back-pressure control valve. Concentrate
discharge pressure is regulated into the system by this control valve, which can be adjusted to assure that foam concentrate is
supplied at pressures that exceed system static water pressure. Concentrate supply piping should be designed and sized so that
residual concentrate pressure exceeds (15 psi minimum) the residual water pressure at the respective inlet of each ILBP.
A pressure throttling valve is located on the concentrate inlet trim of each ILBP. The pressure throttling valve senses
foam concentrate residual pressure and automatically modulates, resulting in the balancing of the concentrate pressure with
the water pressure. A duplex gauge provides the comparative readings of concentrate and water pressure at the ILBP inlets.
Foam concentrate is then introduced to the ratio controller (proportioner) at a pressure that is equal to (balanced with) the inlet
water pressure. A modified venturi in the ratio controller body creates a temporary pressure drop in the water stream, which
then meters the proper amount of foam concentrate into the system.

Foam Systems-Balanced Pressure Components


Product:
Inline Balanced Pressure Pump Skid - Typical Schematic

Piping Standard Piping Options Pump Standard Pump Options -

Schedule 40 Carbon Steel


Brass, Stainless Steel
Ductile Iron, Bronze Fitted
Bronze, Stainless Steel

Model

Pump Capacity
(GPM)@ 200 PSI

IBPS-40

Maximum-3%
Solution Flow (gpm)

Bronze
Stainless Steel
1% / 3%
Per Schedule, NEMAII
Open Drip Proof Enclosure
230 VAC/60/3

Horse power
(pump motor)

Piping Size
(concentrate)

Type of Pump
Controller

1%

3%

40

4000

1320

10

1.5

Limited Service

IBPS-60

60

6000

1980

15

Limited Service

IBPS-80

80

8000

2640

25

Limited Service

IBPS-100

100

10000

3300

25

Limited Service

IBPS-120

120

12000

3960

30

2.5

Limited Service

IBPS-140

140

14000

4620

30

2.5

Limited Service

IBPS-150

150

15000

4950

30

Limited Service

IBPS-200

200

20000

6600

50

Full Service

IBPS-225

225

22000

7425

50

Full Service

IBPS-250

250

25000

8250

60

Full Service

IBPS-275

275

27500

9075

60

Full Service

IBPS-300

300

30000

9900

75

Full Service

Required Ordering Information:

1.
2.
3.
4.

Valve Standard Valve Options Standard Proportioning Standard Pump Controller Standard Pump/Motor -

Tank Capacity/Configuration
Tank Material
Type/Percentage of Foam Concentrate
System Water Pressures (static/residual)
@Ratio Controller(s)

5.
6.
7.
8.
9.

Available Power Supply (voltage/cycle/phase)


Piping Specification
Valve Specification
Paint Specification
Foam System Flow Rate(s) - Minimum/Maximum demand

Balanced Pressure Proportioning Systems


Product:
Inline Balanced Pressure Proportioning Modules
Description:

Spectrum Inline Balanced Pressure Proportioners (ILBPs) comprise a complete foam storage, delivery and proportioning system,
when used in conjunction with properly sized atmospheric foam
tanks, foam pumps, back-pressure control valves and concentrate
distribution piping. When supplied with foam concentrate under
adequate pressure, they are designed to accurately introduce the
foam concentrate into the water stream over a wide range of flows
and pressures by automatically responding to variations in system
demand. ILBPs provide accurate foam concentrate introduction
at either single/local, or multiple/remote system proportioning
location(s). Each ILBP system riser is calculated for system
demand and then equipped with the properly sized proportioner.

InLine Balanced Pressure System Schematic


Operation:

The Inline Balanced Pressure Proportioning System utilizes a foam pump, which pressurizes the distribution piping and
ultimately supplies foam concentrate to each ILBP. Foam concentrate is stored in an atmospheric foam tank. Pumped foam
concentrate that is not delivered to the system is returned to the storage tank via a back-pressure control valve. Concentrate
discharge pressure is regulated into the system by this control valve, which can be adjusted to assure that foam concentrate is
supplied at pressures that exceed system static water pressure. Concentrate supply piping should be designed and sized so that
residual concentrate pressure exceeds (15 psi minimum) the residual water pressure at the respective inlet of each ILBP.
A pressure throttling valve is located on the concentrate inlet trim of each ILBP. The pressure throttling valve senses
foam concentrate residual pressure and automatically modulates, resulting in the balancing of the concentrate pressure with
the water pressure. A duplex gauge provides the comparative readings of concentrate and water pressure at the ILBP inlets.
Foam concentrate is then introduced to the ratio controller (proportioner) at a pressure that is equal to (balanced with) the inlet
water pressure. A modified venturi in the ratio controller body creates a temporary pressure drop in the water stream, which
then meters the proper amount of foam concentrate into the system.

Foam Systems-Balanced Pressure Components


Product:
Inline Balanced Pressure Pump Skid - Typical Schematic

Piping Standard Piping Options Pump Standard Pump Options -

Schedule 40 Carbon Steel


Brass, Stainless Steel
Ductile Iron, Bronze Fitted
Bronze, Stainless Steel

Model

Pump Capacity
(GPM)@ 200 PSI

IBPS-40

Maximum-3%
Solution Flow (gpm)

Bronze
Stainless Steel
1% / 3%
Per Schedule, NEMAII
Open Drip Proof Enclosure
230 VAC/60/3

Horse power
(pump motor)

Piping Size
(concentrate)

Type of Pump
Controller

1%

3%

40

4000

1320

10

1.5

Limited Service

IBPS-60

60

6000

1980

15

Limited Service

IBPS-80

80

8000

2640

25

Limited Service

IBPS-100

100

10000

3300

25

Limited Service

IBPS-120

120

12000

3960

30

2.5

Limited Service

IBPS-140

140

14000

4620

30

2.5

Limited Service

IBPS-150

150

15000

4950

30

Limited Service

IBPS-200

200

20000

6600

50

Full Service

IBPS-225

225

22000

7425

50

Full Service

IBPS-250

250

25000

8250

60

Full Service

IBPS-275

275

27500

9075

60

Full Service

IBPS-300

300

30000

9900

75

Full Service

Required Ordering Information:

1.
2.
3.
4.

Valve Standard Valve Options Standard Proportioning Standard Pump Controller Standard Pump/Motor -

Tank Capacity/Configuration
Tank Material
Type/Percentage of Foam Concentrate
System Water Pressures (static/residual)
@Ratio Controller(s)

5.
6.
7.
8.
9.

Available Power Supply (voltage/cycle/phase)


Piping Specification
Valve Specification
Paint Specification
Foam System Flow Rate(s) - Minimum/Maximum demand

Foam Systems-Balanced Pressure Components


Product:
Spectrum Back Pressure Control Valve
Description:

The Spectrum #108-2WF Back Pressure Control Valve is typically


installed on the foam concentrate pump-to-tank return line of a pumped balanced pressure proportioning system. The pilot operated, diaphragm actuated
150# globe valve is designed to control foam concentrate pressure at the inlet
and is set to maintain a regulated pressure in the concentrate distribution piping which supplies one or more (remote or local) Inline Balanced Pressure
Proportioning Modules (ILBPs). The valves diaphragm is nylon fabricated
(bonded with synthetic rubber), and forms a sealed chamber in the upper portion of the valve, separating operating pressure from line pressure. The valve
automatically opens to relieve any pressure above its (adjustable) set point
and foam concentrate that is not delivered to the ILBP(s) is returned to the
concentrate storage tank. Standard inlet/discharge - 150# FF flange.

Basic Control Valve

Pressure Relief Pilot

Ejector, Fixed Restriction

Flow Control Valve

Sense Line Drain Orifice

Ball Valve- Sense Line Flush

Size

Ductile Iron/
Epoxy Coated

Bronze

Stainless Steel

1.5

108-2WF-1.5 DI

108-2WF-1.5 B

108-2WF-1.5 SS

8.5

2.5

12.375

108-2WF-2.0 DI

108-2WF-2.0 B

108-2WF-2.0 SS

9.375

12.375

2.5

108-2WF-2.5 DI

108-2WF-2.5 B

108-2WF-2.5 SS

10.5

3.5

14.375

108-2WF-3.0 DI

108-2WF-3.0 B

108-2WF-3.0 SS

10.5

3.75

14.625

108-2WF-4.0 DI

108-2WF-4.0 B

108-2WF-4.0 SS

13.5

4.5

16.375

También podría gustarte