Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ANTENNENTECHNIK
GmbH
b
a
ANTENNENTECHNIK
GmbH
CONTENT
1. Set up of the network connection............................................................................. 3
1.1 WINDOWS XP ......................................................................................................... 3
1.2 WINDOWS 2000 ...................................................................................................... 5
2. Set up of the Web browser ........................................................................................ 7
2.1 Microsoft Internet Explorer ....................................................................................... 7
3. Working with the Headend Controller (HCB 100).................................................... 8
3.1 Call up the Headend Controller ................................................................................ 8
3.2 Selection of the desired Headend overview............................................................... 10
3.3 Selcection of Adjustments and Configurations...........................................................12
3.4 Basic settings of the Headend Controller ..................................................................13
3.4.1 Reset of the HEADEND CONTROLLER ......................................................... 13
3.4.2 Configuration of the HEADEND CONTROLLER .............................................. 13
3.4.3 Manual start of NIT - distribution........................................................................ 14
3.4.4 Timer / Time controlled switching ...................................................................... 14
3.4.5 Adjustment of Date/Time .................................................................................. 20
20
3.4.6 Cold stard of individual/single modules................................................................
3.4.7 Change of User ID, Pass word.......................................................................... 21
3.4.8 Additional NIT - Datas ....................................................................................... 22
3.4.9 Protocoll / Log book .......................................................................................... 23
3.4.10 Update of the HEAEND CONTROLLER............................................................ 24
26
4. Diagramm for the manual operation/management of the HCB 100 ...........................
4.1 Configuration of the HCB 100 .....................................................................................27
4.2 Adjustment possibilities of IP - Numbers ...................................................................27
4.3 General Information for adjustments of the IP - Number ...........................................27
28
5. LCD display at the HCB 100 .........................................................................................
5.1 Initializing of the modules after a RESET ..................................................................28
5.2 Standard Display ...................................................................................................... 28
5.3 Error display, if a module can not be called up ........................................................ 28
b
a
ANTENNENTECHNIK
GmbH
3
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
TCP/IP Protocol
not installed
GmbH
TCP/IP Protocol
installed
b
a
ANTENNENTECHNIK
GmbH
5
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
TCP/IP Protocol
NOT installed
GmbH
TCP/IP Protocol
installed
b
a
ANTENNENTECHNIK
GmbH
General settings
Select No connections
b
a
ANTENNENTECHNIK
GmbH
The Login - window of the HCB 100 will be displayed if all adjustments/settings are correct.
You now can save/secure the operation via a password.
Selecting the configuration Automatic Login allows i Login without password entry (see 3.4.2).
8
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
9
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
The Headend overview (Matrix) displays all the modules of the entire Headend system as a Matrix.
- The first line (horizontaly / here 02 and 03) displays the line-addresses of the Bus-Extender/Power supply
(BEB 100).
- The fist line (verticaly / here 01 - 07) displays the addresses of the individual modules.
as well as additional information like the module type, the synchronisation (SYNC) for digital converters,
channel name(s), respective output band and -frequencyies...
10 Selecting the button Edit gets you to the operation overview of the respective module.
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
The Headend overview table (Button) displays all the modules of the
entire Headend system with various configurtion buttons.
Following functions can be selected:
Edit
Die Bedienoberflche des jeweiligen Moduls wird geffnet
und es knnen Einstellungen vorgenommen werden.
Copy (data page)
The Copy (data page) of the desired module will be processed. It displays
all adjusted parameters and can be saved/stored.
(Store/save within Internet Explorer: Data/File Save target at/as)
The menu All enables the processing of a copy/data page for the entire
Headend system.
NOTICE:
The Copies/data pages will be stored/saved with a new forma and are NOT
downwards compatible. These can not be used with the HCB 100 module types
(9650.01 / 9650.02).
ON / OFF
Ouput attenuation
Selecting Output attenuation enables you to change the output level of the
desired module.
Status
The operating status of the desired module will be called up and displayes.
- Selecting the button Headend read out effects a Scan of the entire Headend system including all
connected modules.
- Selecting the button check-out occurs an automatic log out of the headend system
- Selecting the button Selection gets you to the selection menu of the headend system.
11
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
12
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
GmbH
ANTENNENTECHNIK
NIT - Distribution
ON ... NIT - datas will be exchanged dynamically
OF ... NIT - dats will be switched OFF
a
NIT - Rack A
NIT - Rack B
Notice:
Special adjustments have to be done when interchanging NIT - datas
of two HCB 100 or one HCB 100 with additional NIT - datas
Example:*
HCB 100 with
32 x STB 606**
NIT - Rack A
NIT - Rack B
OFF
OFF
EIN
OFF
OFF
ON
Key lock
ON ... manual settings/adjustments directly at HCB 100 deactivated
OFF ... manual settings/adjustments directly at HCB 100 activated
a
Automatic Login
ON ... Writing protection is deactivated. Access to the Menu without password entry possible.
OFF ... Entry of User ID & Password necessary for access to the menu
A
13
b
a
ANTENNENTECHNIK
GmbH
14
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
15
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
Differences
NOTICE!
Please consider that only the values which are desired to be changed for switchover have to entered
within the configuration window.n.
Also the desired switchtimes for the switchover of the desired programs have to be selected.
NOTICE!
If programs (e. G. KIKA) are to be switchedover
by fixed broadcasting-times, then please to
NOT program the switchover time!!!
16
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
Program selection for the C-LINE headend system (special case via RF - Signal)
Differences
Example
- Currently channel 1 (HSE) is activ
- Output channel for timer controlled switchover is K25
- As desired Sonnenklar-TV will be switched ON and HSE24 will be switche OFF at 20:00 hrs..
activated channel
Only the active channel has to be selected for this configuration. No further entries necessary
This time controlled switchover allows to change/switchover programs of different levels within one modul
without an additional RF - switch.
17
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
bernahme:
Color bar:
When color bar is ON then and datas will be sent to the module then the Farbbalken
will be switched off
TV-picture with
Farbbalken ON
Parameter-List
1. selection box
8. selection box
18
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
GmbH
ANTENNENTECHNIK
b
a
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
CCB 1x1 CTB 1x1 VMB 1x1 ATB 1x1 ADB 109
923x.xx 983x.xx 922x.xx 984x.xx 9861.01
TCB xx1
92xx.xx
x
19
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
* Die Zeitaktualisierung erfolgt bei aktivierten Neustart auch wenn fr kein Modul ein Neustart vereinbart wurde.
b
a
ANTENNENTECHNIK
GmbH
21
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
This function has to be activated at the Configuration menu for the Headend Controller HCB 100.
Then a table for 16 manual entries is available.
The values for output frequency, modulation and QAM symbol rate of the respective channels are known.
The Transport stream - ID and the ORIGINAL Network-ID can be selected/seen with a
QPSK-QAM Transmodulator (STB606/607 or STC696/697) or with a respective test device.
22
65
67
69
71
75
77
81
83
85
Downlink
(MHz)
Symbol rate
(MSps)
SAT-IF
(MHz)
11720
11758
11798
11836
11914
11954
12032
12070
12110
27,500
27,500
27,500
27,500
27,500
27,500
27,500
27,500
27,500
1120
1158
1198
1236
1314
1354
1432
1470
1510
0x0003
0x0011
0x0002
0x044D
0x0006
0x0437
0x0004
0x0005
0x0431
(3)
(17)
(2)
(1101)
(6)
(1079)
(4)
(5)
(1073)
0x0085
0x0085
0x0085
0x0001
0x0085
0x0001
0x0085
0x0085
0x0001
(133)
(133)
(133)
(1)
(133)
(1)
(133)
(133)
(1)
b
a
ANTENNENTECHNIK
GmbH
The Protocoll registers/stores different accesses and its related events to the headend system:
1.
2.
3.
4.
5.
6.
ALL CHANGES WILL BE STORED AND DISPLAYED WITH DATE AND TIME INFORMATION ONLY IF THE
CLOCK OF THE HCB 100 IS SYNCHRONIZED
23
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
Connect PC/Laptop to the Headend Controller HCB 100 (directly connection or via network)
Select the configuration page for the HEADEND CONTROLLER at the selection menu
Search
Search
Upload is running!!!
b
a
ANTENNENTECHNIK
GmbH
Softwareupdate
BLANKOM
Antennentechnik GmbH
ENTER
13:01
25
b
a
GmbH
ANTENNENTECHNIK
BLANKOM
ENTER
Modules/Cassettes
Type / Part N
OK
Change Module
NIT - Distribution
NIT-Verteilung execution
Temperature
Displays
Temperature
Voltage
Displays
Voltage
Current
Displays
Current
Any key
Any key
Any key
Any key
Configuration
Change configuration
11
Contrast
Displays/Selection
Version
Displays
Reset
+/-
Any key
Version
System reset
IP - Number
Back
ENTER
Up
Down
26
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
Change IP - Number
21
b
a
GmbH
ANTENNENTECHNIK
Address selection
NIT - Rack A
NIT - Rack B
End
NIT - distribution
Matrixview
All signs
11
IP - number Webserver
xx or zz
(see fig. on the
right side)
IP - number change
xx or zz
(see fig. on the
right side)
Subnet Mask
NO
xx or zz
(see fig. on the
right side)
Gateway
Change
JA
xx or zz
(see fig. on the
right side)
DHCP - IP
xx or zz
(see fig. on the
right side)
VEA - IP
Trap - IP (SNMP)
4. Byte (MSB)
3. Byte
2. Byte
xx or zz
(see fig. on the
right side)
1. Byte (LSB)
21
21
21
* Option
27
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
IP-Nummer
Start ...
V2.22 / 20.04.06
Pause . . . . . .
8s
Search for BUS-Extenders BEB 100 (used with of the headend system)
==> Displays all found BEB 100
Search. . .
BUS-Extender
BEB 100
ADDR 05
12345 - - - - - - - - - - - -
Search. . .
BEB 100
ADDR 02
Module
ADDR 04
-----------------
Search. . .
BEB 100
ADDR 02
Modules
ADDR - 12345 - - - - - - - - - - - -
ADDR 02
ADDR - 15:23
Suche. . .
BEB 100
ADDR 02
BEB 100
ADDR - NIT - Verteilung
11111
TTT TTT
22222
ZZZZ.ZZ
28
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
GmbH
INFORMATION
A Reset/Restart can be done within the menu of the Headend Controller or at the HCB 100 directly.
==> The headend will also be scanned then
29
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
b
a
ANTENNENTECHNIK
Laptop
or Ethernet
HCB 100
IP-Number 1
IP-Number 2
1. HCB 100
IP-Number 2
Laptop
or Ethernet
2. HCB 100
HUB / SWITCH
IP-Number 3
IP-Number 1
3. HCB 100
IP-Number 4
Laptop
WLAN
card
Ad-hoc
IP-Number 1
Wireless
Access Point
IP-Number 2
1. HCB 100
IP-Number 3
ISDN
HCB 100
ISDN-Router
IP-Number 1
ISDN
ISDN-Router
IP-Number 2
HUB / SWITCH
1. HCB 100
IP-Number 1
30
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
IP-Number 2
GmbH
b
a
ANTENNENTECHNIK
GmbH
analogue
Telephone
connection
analogue
Telephone
connection
Router with
integrated
Modem
HCB 100
IP-Number 1
IP-Number 2
Router with
integrated
Moddem
HUB / SWITCH
IP-Number 1
Example: Prestige 100 MH from ZyXEL
1. HCB 100
IP-Number 2
Laptop
1. HCB 100
IP-Number 2
Ethernet
(LAN / WAN)
HUB / SWITCH
with minimum
6 Ports
2. HCB 100
IP-Number 3
ISDN
ISDN-Router
3. HCB 100
IP-Number 4
31
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Strae 1 D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de