Documentos de Académico
Documentos de Profesional
Documentos de Cultura
AL
LC
CA
Diivv..
AT
TE
EL
L--L
LU
UC
CE
EN
NT
TE
EnntteerrpprriisseeSSoolluuttiioonnssD
E
Etthheerrnneett &
& IIP
PN
Neettw
woorrkkiinngg P
Poorrttffoolliioo
Table of Contents
Disclaimer ______________________________________________________________________ 4
Trademark Text _________________________________________________________________ 4
Revision History _________________________________________________________________ 4
Alcatel-Lucent Company Background ________________________________________________ 5
About Boilerplate _________________________________________________________________ 6
Introducing OmniSwitch 6400 Series _________________________________________________ 7
Overview _____________________________________________________________________________ 7
Alcatel-Lucent OmniSwitch 6400 Family __________________________________________________ 8
Network Positioning and Applications ____________________________________________________ 9
Internal Architecture__________________________________________________________________ 39
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Disclaimer
The information contained in this document represents the features of the listed Alcatel-Lucent Products.
Alcatel-Lucent makes no claims regarding the accuracy of this published information and specifically disclaims all liability for
loss or damages of any kind resulting from discussions made or actions taken by any party based on this information.
Product information contained in this document is subject to change and frequent updates without prior notice.
Contact your local Alcatel-Lucent representative for the most current information.
Copyright 2008 Alcatel-Lucent Internetworking, Inc. All rights reserved. This document will not be reproduced in
whole or in part without the express written permission of Alcatel-Lucent Internetworking.
Trademark Text
To protect the Alcatel-Lucent trademark, the following legal text must be inserted in the body of all RFPs, RFIs, and
quotations. Alcatel-Lucent is a registered trademark of Alcatel-Lucent, a society anonym organized under the laws of
the Republic of France. The first use of Alcatel-Lucent in any documents must include a "" registered trademark symbol.
Revision History
Rev.
Preliminary
Production
Release
Date:
August 2008
October 2008
Revision Description
Draft A1
Revision B
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
About Boilerplate
This boilerplate provides the information for newly introduced OmniSwitch 6400 series product family. It covers
hardware details of different models 6400 series and provides brief summary of AOS software features supported
on OmniSwitch 6400 series product family. For the details of AOS software features supported on OmniSwitch
6400 series product family users needs to refer generic AOS software features Boilerplate. AOS software features
Boilerplate provides the details of different AOS software features supported on various OmniSwitch products like
6400, 6800, 6850, 9000 series.
It is highly recommended that this Boilerplate document be used along with other Related Documents to
collectively gather the most up-to-date information required for responding to customers RFPs & RFIs proposals.
This document will not contain detailed design/functional/configuration, and/or software/hardware architectural
specifications. It will only provide an overview of such aforementioned specifications.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
POE
Ports
Non-POE
Ports
10 Gig.
Stacking
Ports
OS6400-24
N/A
24
OS6400-48
N/A
48
OS6400-U24
N/A
24
OS6400-U24D
N/A
24
OS6400-P24
20
N/A
OS6400-P24H
20
OS6400-P48
OS6400-P24H
10/100/1000Mbps
,GigE, or
10/100Mbps
Non-PoE Models
20 10/100/1000
Combo
Ports*
POE Power
Budget
Power Supplies
supported
N/A
44 10/100/1000
N/A
N/A
N/A
Powered by 126W
DC (internal)
22 GigE SFP or
100-Base-X
SFP**
22 GigE SFP or
100-Base-X
SFP**
PoE Models
20 10/100/1000
Powered by 126W
AC (internal)
Powered by 126W
AC (internal)
Powered by 126W
AC (internal)
N/A
360W AC
N/A
20 10/100/1000
N/A
510W AC
44
N/A
44 10/100/1000
N/A
360W AC
44
N/A
44 10/100/1000
N/A
510W AC
*Combo ports are ports individually configurable to be 10/100/1000BaseT or 1000BaseX that can support SFP
transceivers for short, long and very long distances.
** Gig fiber interfaces support Gig SFP or 100BaseX SFP optical transceivers.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Simplified manageability
Alcatel.Lucent-ESD
Calabasas/CA./USA
Evolution / Migration
Interoperability
The Alcatel-Lucent Vision, Mission and Values form the cornerstones of our new company.
The statements set the tone for the way the new company will operate.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Extensive Experience
Innovation & Technology & Engineering
With 23,000 technology patents and a history of more than 100 years in the communications field, AlcatelLucent has proven experience. Alcatel-Lucent serves more than 500,000 customers, including many of the
Fortune 500 and leading companies in most sectors.
Alcatel-Lucents century of innovation and engineering has allowed us to provide the enterprise network
with solutions that span the entire IP communications house. This house has at its top story the productivity
enhancing applications, which run on Alcatel-Lucents award winning IP telephony communication
servers. Supporting these products is the IP networking data products - the foundation of the IP
communications house. As you well know, any house is only as strong as its foundation. We understand
that an enterprise network must be able to rely on its infrastructure to deliver the communications and
applications necessary to conduct business and take care of users. The first requirement is availability- we
expect the phone and applications that expand the value of voice communications or integrate voice and
data communications to be available.
Our experience tells us that these networks must also be secure, and easily managed, otherwise valuable
capital is diverted from the business goals of the company, lessening the opportunity to react to market
changes and opportunities.
Alcatel-Lucent also knows that the value to the enterprise can be measured in multiple ways - from the
solutions purchased to the solutions enabled via partnerships and adherence to industry standards.
As you learn more about us and our business philosophy, you will come to know that our greatest benefit
to you and your company is not just the industry leading solutions we provide, but the synergies we create
with the other products and solutions already deployed in your network.
You see, we believe a strong foundation is not just to support the existing building, but to also support
future growth.
High Availability
Your business users demand much, but assume one thing above all: availability. Using a strong hardwaresoftware mix, Alcatel-Lucent IP infrastructure solutions create a single-entity network that is resistant to
configuration errors and doesn't need resetting after changes. Together with highly affordable, redundant
network management and continuous switching capabilities, Alcatel-Lucents IP infrastructure solutions
ensure fail-safe and cost effective business operations.
High Security
With Alcatel-Lucent IP infrastructure solutions, your information assets are really protected, from the core
to the edge. The same security features are embedded in all Alcatel-Lucent IP infrastructure components:
you dont need to go through a programming nightmare when deploying your network security policy or
adding a new switch to the system. Security problems can be isolated and contained; specific security tasks
can be addressed. In a nutshell, with an Alcatel-Lucent IP infrastructure, gaps in the communication
protection system are eliminated, including at the PBX level.
Simplified Management
Alcatel-Lucent IP infrastructure solutions leverage common components and feature sets, running on a
single operating system for centralized management. This simplifies both deployment and day-to-day
operations, while minimizing down time. As a result, total network running costs decrease, and you can
easily anticipate or react to evolving business needs. Last but not least, your IT people will appreciate the
one-touch graphical approach of fully featured yet easy-to-use network management applications, helping
them work more easily and quickly.
Managing Alcatel-Lucents entire suite of solutions and equipment is OmniVista.
OmniVista eases the management burden in many ways:
First, by centralizing the management activities of device discovery, topology / health maps, traps and
health statistics, the LAN manager can quickly ascertain the networks condition at a glance.
Next, through streamlining bulk operations, the IT staff has a mechanism to push configurations, QoS,
security, VLAN memberships, and image files to the devices in the network or to schedule after hours back
up of the configurations and image files.
Finally, OmniVista utilizes self-contained applications - like the Automated Quarantine Manager - to
deliver value added services like malicious behavior containment, or the OneTouch QoS to deliver end-toend QoS policy enforcement.
From this single application, the IT staff can access secure telnet and https GUI sessions with the AlcatelLucent devices, and discover 3rd party equipment through their MIB identity.
OmniVista is the platform, which provides the enterprise with the ease of management necessary to grow
securely.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Product Portfolio
Escalation
Key Partners
The Alcatel-Lucent Internetworking product portfolio consists of a full range of Ethernet based switches
that address the Enterprises entire networking needs.
The family of Alcatel-Lucent Ethernet switches range from entry-level L2+ switches where price is the
main concern all the way up to advanced L3 modular or fixed configuration chassis providing state-of-theart and standard-based features that meet the stringent requirements for an highly available, highly secure
and highly manageable networking infrastructure.
The LAN switches, which support your business communications, come in two sets - entry level, fixed
configuration and AOS advanced featured core to wiring closet.
The entry level, fixed configuration solutions are provided for those customers who do not need to provide
the advance services and security features our AOS switches provide. Typically small businesses, these
solutions do provide great price/performance value for 10/100 and 10/100/1000.
Our AOS advanced services switches deliver on our promise to deliver the industrys best value. Our core
offerings of the OmniSwitch 6800, 6850, 7000 and 9000 family provide features which are important to the
enterprise core - native server load balancing, link aggregation, high density gigabit and 10 gigabit, as well
as support for routing protocols and multicast, classic IP addressing as well as IPv6, hot swappable
modules and full management and power supply redundancy to promote high availability. Our advanced
stackable line runs the same OS, and can be managed just like a chassis - one IP address, with management
module redundancy for high availability. Supporting PoE, standard routing protocols and multicast, classic
and IPv6 addressing as well as a host of other features, our AOS switch line is the easiest to manage in the
industry, with a price to performance relationship unmatched in the industry.
Expanding the IP communications foundation, Alcatel-Lucents OmniAccess WLAN family provides the
enterprise with the industrys most complete WLAN security, availability, and mobility solutions.
Further, the OmniAccess Service Gateways products perform at wire speed even with small packet sizes or
network services enabled and include a wide array of WAN integrated capabilities - eliminating the need to
purchase extra equipment to support additional WAN services.
Alcatel-Lucents enterprise SNMP manager, OmniVista, can manage the entire portfolio.
Alcatel-Lucent is fully committed to providing a comprehensive range of services and programs in support
of its vast array of products.
Alcatel-Lucents ecosystem of more than 1,500 partners helps ensure that solutions will be installed,
integrated, fully supported and maintained according to Alcatel-Lucents high standards, following global
best practices. Alcatel-Lucents Accreditation Program ensures that its partners are fully trained on the
latest technologies and techniques to meet and support customer requirements.
Technical Support
An Alcatel service agreement brings your company the assurance of 7x24 no-excuses technical support.
Youll also receive regular software updates to maintain and maximize your Alcatel products features and
functionality and on-site hardware replacement through our global network of highly qualified service
delivery partners. Additionally, with 24-hour-a-day access to Alcatels Service and Support web page,
youll be able to view and update any case (open or closed) that you have reported to Alcatels technical
support, open a new case or access helpful release notes, technical bulletins, and manuals.
SUPPORTbasic
7 X 24 Technical Response Center (7x24 phone support)
Includes e-service web access, software releases and repair and return of hardware to be completed in 10
business days from receipt for same version only. Excludes NMS & Authentication Services software.
SUPPORTplus
hardware support
Includes 7X24 phone support, software releases for same version only, e-service web access, advance
shipment for next business day arrival of replacement hardware. Excludes NMS & Authentication Services
software.
SUPPORTtotal
hardware support
Includes 7X24 phone support, software releases for same version only, e-service web access, same day
4-hour hardware replacement (labor & parts) 7 days a week 24 hours a day. Allow 30 days lead time from
receipt of sales order. Excludes NMS & Authentication Services software.
Upon opening a case, customers will receive a case number and may review, update, or escalate support
cases on-line. Escalation process is based on the severity level of the issue per the definitions below.
Severity 1: Production network is down resulting in critical impact on businessno workaround
Severity 2: Segment or Ring is down or intermittent loss of connectivity across network.
Severity 3: Network performances are slow or impairedno loss of connectivity or data.
Severity 4: Information or assistance on product feature, functionality, configuration, or installation.
Alcatel-Lucent has created a partnering program that enables it to work with a set of vendors in order to
provide solutions that fall outside of its core competencies. Partnerships provide channels and customers a
catalog of product solutions that are easy to find, evaluate, buy, install, and operate.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Customer Training
Warranty
Service & Support Programs & End Of Life
Lifetime Support
Hardware Warranty
Software Warranty
Life Span
Customers can access customer support 24 x 7 x 365 via toll free number or Internet.
Professional services can be contracted to perform a variety of functions, including customer network
operations center management, network audits, security installation, network design, equipment staging,
configuration and installation, resident engineering, proof of concept, solutions development and
integration. Customers may take advantage of professional services with regard to customizing the network
management system for optimal tuning in a multi-vendor environment. Professional Services also offers
Customer Network Operations Center Service, which proactively monitors the customer network and
responds to alarms and traps.
Alcatel-Lucent offers instruction on its enterprise data products in a variety of modes instructor-led
training (ILT), computer-based training (CBT), web-based training (WBT), and customized
seminars/workshops/webinars. ILT is offered at several locations or on-site at customer locations. All
instructors are Alcatel-Lucent Certified Switch Instructors (ACSIs).
This means they have attended all of the courses, completed all of the certifications and attended the
weeklong Train-the-Trainer program that includes a review of Alcatel-Lucent training policies, procedures,
and practices to assure consistent delivery of information around the world.
Standard Warranty Support
All Alcatel-Lucent's products come with a standard one-year warranty on hardware and a three-month
warranty on software.
Hardware DOA Warranty
If hardware fails within the first 30 days after delivery, call Alcatel-Lucent's Internetworking Division
Customer Service by 2:00 p.m. (Pacific Standard Time) and they will send a replacement part overnight.
One-year Hardware Warranty
After the first 30 days, call Alcatel-Lucent's Internetworking Division Customer Service for a Return
material Authorization (RMA) and ship the part back to them for factory repair. The repaired unit will be
shipped back to you from our facility within 10 business days. Next day, advanced replacement is available
for a small expedited fee.
All-in-One Maintenance: All maintenance fix releases will be provided free of charge during the first 90
days.
Service & Support Programs & End Of Life (EOL)
In accordance with Alcatel-Lucents established Product Life Cycle policy, as well as its customer
satisfaction policy, Alcatel-Lucent will honor its obligations to customers currently under warranty or with
valid purchased service agreements relating to a product line for five (5) years (Software: three (3) years
and Hardware: five (5) years) beyond the EOL (End Of Life) of a product line.
Lifetime Support
All versions of the stackable product families come with a Limited Lifetime Hardware Warranty, limited to
the original owner, and will be provided for up to five (5) years. Faulty parts will be replaced via a five (5)
business days AVR (Advance Replacement) RMA.
Limited Lifetime Warranty does not apply to SFPs.
Hardware Alcatel.Lucent warrants that, for the applicable warranty period of one (1) year for hardware
(a) Equipment shall, under normal use and service, be free from defects in material and workmanship, and
(b) Equipment shall materially conform to Alcatel.Lucents specification therefore in effect on the date of
shipment. The warranty period applicable to any product shall be one (1) year from the date of shipment
except if Alcatel.Lucent performs installation Services for any Product, then the warranty period applicable
to the product shall be one (1) year from the date Purchaser is deemed to have accepted the Product in
accordance with the Agreement. Hardware warranty only includes Standard Repair or Replacement of
Defective Parts (Standard R&R) support.
Lifetime Support
All versions of the stackable product families come with a Limited Lifetime Hardware Warranty, limited to
the original owner, and will be provided for up to five (5) years. Faulty parts will be replaced via a five (5)
business days AVR (Advance Replacement) RMA.
Limited Lifetime Warranty does not apply to SFPs.
Software & Firmware Alcatel.Lucent warrants that, for the applicable warranty period of ninety (90)
days for software, (a) Software media shall, under normal use and service, be free from defects in material
and workmanship, and (b) Software shall materially conform to Alcatel.Lucents specification therefore in
effect on the date of shipment. However, Alcatel.Lucent makes no warranty that any software will operate
uninterrupted or error free. Software warranty includes software bug fixes and patches. Software upgrades
and/or enhancements are not included as a part of Alcatel.Lucents warranty, but can be purchased
separately.
The Alcatel Product Life Span depends on many conditions in the market place and varies from platform to
platform. Historically speaking, some platforms have been out in the market more than seven (7) years and
still continue to exist on our product portfolio, while others may have experienced shorter life spans.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Cost Effectivness
CAPEX savings
Alcatel-Lucents enterprise networking mission is to provide its customers with the industry's best value in
highly available, secure and easy-to-manage network solutions. The industrys best value means having
leading features for availability, security and manageability and simultaneously reducing the total cost of
network ownership. In short, the best network at the best total cost.
Alcatel-Lucent IP infrastructure solutions are not only priced right upfront. They also fit your business
exactly, reducing both operating and upgrade costs. All solutions share common components and feature
sets for deployment flexibility, easy maintenance and upgrading. Highly scalable and able to run on one
operating system to simplify centralized management, they can be reused across your network as it changes
and grows, thus yielding an even higher return on investment.
Delivering the best value to the enterprise, Alcatel-Lucents Enterprise Product Portfolio delivers the best
price/performance/features of any manufacturer in the industry.
Faster fault isolation/restoration
Enhanced engineering and local & remote configuration tools
Alcatel-Lucent offers the best value in port / feature / price ratio of any manufacturer in the industry.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
OS6400-U24D
OS6400-48
OS6400-P48
OS6400-P48H
OS6400-BP
OS6400-BP-P
OS6400-BP-PH
OS6400-BP-D
SFP-GIG-EXTND
SFP-GIG-LH40
SFP-GIG-LH70
SFP-GIG-LX
SFP-GIG-SX
SFP-GIG-T
SFP4-GIG-LX
SFP-GIG-BX-D
SFP-GIG-BX-U
SFP4-GIG-SX
SFP-100-BX20LT
SFP-100-BX20NU
SFP-100-LC-MM
SFP-100-LC-SM15
SFP-100-LC-SM40
be used on a one for one basis. Ethernet optical transceivers (SFP), stacking cable, and backup power supplies can be ordered
separately. Internal AC supply. [ECCN 5A992]
OS6400-U24 chassis Gigabit Ethernet chassis in a 1U form factor with 22 100/1000 Base-X SFP ports, 2 combo ports configurable
to be 10/100/1000 BaseT or 100/1000 Base-X, and two dedicated 10G stacking ports. Combo ports supprt either copper or fiber can
be used on a one for one basis. Ethernet optical transceivers (SFP), stacking cable, and backup power supplies can be ordered
separately. Internal DC power supply. [ECCN 5A992]
OS6400-48 chassis Gigabit Ethernet chassis in a 1U form factor with 44 RJ-45 ports individually configurable to 10/100/1000
BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two dedicated 10G stacking ports. Combo ports
support either copper or fiber can be used on a one for one basis. Ethernet optical transceivers (SFP), stacking cable, and backup
power supplies can be ordered separately. Internal AC supply. [ECCN 5A992]
OS6400-P48 chassis Gigabit Ethernet chassis in a 1U form factor with 44 RJ-45 POE ports individually configurable to
10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two dedicated 10G stacking ports.
Combo ports supprt either copper or fiber can be used on a one for one basis. Ethernet optical transceivers (SFP), stacking cable,
and backup power supplies can be ordered separately. The bundle includes a 360W AC PoE power supply with
power shelf, country specific power cord, user manuals access card, rack mounts and RJ-45 to DB-9 adaptor. [ECCN 5A992]
OS6400-P48 chassis Gigabit Ethernet chassis in a 1U form factor with 44 RJ-45 POE ports individually configurable to
10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two dedicated 10G stacking ports.
Combo ports supprt either copper or fiber can be used on a one for one basis. Ethernet optical transceivers (SFP), stacking cable,
and backup power supplies can be ordered separately. The bundle includes a 510W AC PoE power supply with
power shelf, country specific power cord, user manuals access card, rack mounts and RJ-45 to DB-9 adaptor. [ECCN 5A992]
Power Supplies
OS6400-BP modular 126W AC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable and country specific power cord.
OS6400-BP-P modular 360W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection
cable and country specific power cord.
OS6400-BP-PH modular 510W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis
connection cable, country specific power cord, power shelf and rack mounts.
OS6400-BP-D modular 120W DC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable.
Transceivers
Extended 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm
wavelength (nominal) with an LC connector. Reach of up to 2 km on 62.5/125 m MMF and 50/125 m MMF. Requires
SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.[Formerly known as GE-EXTND-SFP]
1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength
(nominal) with an LC connector. Typical reach of 40 Km on 9/125 m SMF.
1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength
(nominal) with an LC connector. Typical reach of 70 Km on 9/125 m SMF.[Formerly known as MINIGBIC-LH-70]
1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength
(nominal) with an LC connector. Typical reach of 10 Km on 9/125 m SMF.[Formerly known as MINIGBIC-LX]
1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength
(nominal) with an LC connector. Typical reach of 300m on 62.5/125 m MMF or 550m on 50/125 m MMF.[Formerly
known as MINIGBIC-SX]
1000Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP
only works in 1000 Mbit/s speed and full-duplex mode
Pack of four (4) 1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Support single mode fiber over 1310nm
wavelength (nominal) with an LC connector. Typical reach of 10 Km on 9/125 m SMF.
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single
mode fiber optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single
mode fiber optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.
Pack of four (4) 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Support multimode fiber over 850nm
wavelength (nominal) with an LC connector. Typical reach of 300m on 62.5/125 m MMF or 550m on 50/125 m MMF.
100Base-BX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single
mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office
(OLT) transmits 1550nm and receives 1310nm optical signal
100Base-BX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single
mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU)
transmits 1310nm and receives 1550nm optical signal
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic
cable.
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic
cable up to 15KM.
100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic
cable up to 40KM.
Alcatel.Lucent-ESD
Calabasas/CA./USA
OS6400-CBL-150
OS6400-CBL-30
OS6400-CBL-60
OS6400-MNT
Cables andAccessories
OS6400 150 centimeters long stacking cable.
OS6400 30 centimeters long stacking cable.
OS6400 60 centimeters long stacking cable.
Base/wall mounting kit for OS6400 models. Includes 4 brackets and screws.
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-24
The OmniSwitch 6400-24 is a stackable edge/workgroup switch offering 20 unshared 10/100/1000Base-T ports, as well as
four combo ports individually configurable to be 10/100/1000Base-T.
The front panel of the OS6400-24 chassis contains the following major components:
System status and slot indicator LEDs
(20) unshared 10/100/1000Base-T ports
(4) shared combo 10/100/1000Base-T ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
20
4
4
192 (stack of eight switches)
32 (stack of eight switches)
Powered by 126W AC (internal)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches (internal power supplies)
8.94 lbs. (4.65 kg)
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-P24
The OmniSwitch 6400-P24 is a stackable edge/workgroup switch offering 20 unshared 10/100/1000Base-T Power over
Ethernet (PoE) ports, as well as four combo ports individually configurable to be 10/100/1000 Base-T PoE or 1000 Base-X
high speed connections.
The front panel of the OS6400-P24 chassis contains the following major components:
System status and slot indicator LEDs
(20) unshared 10/100/1000Base-T PoE ports
(4) shared combo 10/100/1000Base-T PoE ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
20
4
4
192 (stack of eight switches)
32 (stack of eight switches)
360W system supply (320 watts for PoE)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches without power shelf.
17.56 inches with power supply shelf and backup supply
10.28 lbs. (3.51 kg) without Power Supply
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
Default 15.4 watts per port
Configurable from 3 watts to 15.4 watts per port
It uses 360 watts P/S, the maximum available PoE power is
240 watts (less 1watt per port of overhead) per unit.
Please refer to the Power Supply Specification Section for
more details.
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-P24H
The OmniSwitch 6400-P24H is a stackable edge/workgroup switch offering 20 unshared 10/100/1000Base-T Power over
Ethernet (PoE) ports, as well as four combo ports individually configurable to be 10/100/1000 Base-T PoE or 1000 Base-X
high speed connections. This model comes with High-PoE power supply (510w).
The front panel of the OS6400-P24 chassis contains the following major components:
System status and slot indicator LEDs
(20) unshared 10/100/1000Base-T PoE ports
(4) shared combo 10/100/1000Base-T PoE ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
20
4
4
192 (stack of eight switches)
32 (stack of eight switches)
510W system supply (470 watts for PoE)
Alcatel.Lucent-ESD
Calabasas/CA./USA
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches without power shelf.
17.56 inches with power supply shelf and backup supply
10.28 lbs. (3.51 kg) without Power Supply
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
Default 15.4 watts per port
Configurable from 3 watts to 15.4 watts per port
Using the 510 watts P/S, the maximum available PoE
power is 390 watts (less 1 watt per port of overhead) per
unit.
Please refer to the Power Supply Specification Section for
more details.
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-U24
The OmniSwitch 6400-U24 is a stackable edge/workgroup switch offering 22 MiniGBIC SFP ports (100 or 1000 Base-X),
2 MiniGBIC combo SFP/RJ45 ports.
The front panel of the OS6400-U24 chassis contains the following major components:
System status and slot indicator LEDs
(22) MiniGBIC SFP ports (100 or 1000 Base-X)
(2) MiniGBIC combo SFP/RJ45 ports
Console port (RJ-45)
USB port (USB 2.0)
Alcatel.Lucent-ESD
Calabasas/CA./USA
22
2
192 (stack of eight switches)
32 (stack of eight switches)
Powered by 126W AC (internal)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches
8.94 lbs. (3.7 kg)
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-U24D
The OmniSwitch 6400-U24D is a stackable edge/workgroup switch offering 22 MiniGBIC SFP ports (100 or 1000 BaseX), 2 MiniGBIC combo SFP/RJ45 ports.
The front panel of the OS6400-U24D chassis contains the following major components:
System status and slot indicator LEDs
(22) MiniGBIC SFP ports (100 or 1000 Base-X)
(2) MiniGBIC combo SFP/RJ45 ports
Console port (RJ-45)
USB port (USB 2.0)
Alcatel.Lucent-ESD
Calabasas/CA./USA
22
2
192 (stack of eight switches)
32 (stack of eight switches)
Powered by 126W DC (internal)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches
8.94 lbs. (3.7 kg)
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-48
The OmniSwitch 6400-48 is a stackable edge/workgroup switch offering 44 unshared 10/100/1000Base-T ports, as well as
four combo ports individually configurable to be 10/100/1000Base-T.
The front panel of the OS6400-48 chassis contains the following major components:
System status and slot indicator LEDs
(44) unshared 10/100/1000Base-T ports
(4) shared combo 10/100/1000Base-T ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
44
4
4
384 (stack of eight switches)
32 (stack of eight switches)
Powered by 126W AC (internal)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 13.0D
13 inches
10.28 lbs. (4.65 kg)
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-P48
The OmniSwitch 6400-P48 is a stackable edge/workgroup switch offering 44 unshared 10/100/1000Base-T Power over
Ethernet (PoE) ports, as well as four combo ports individually configurable to be 10/100/1000 Base-T PoE or 1000 Base-X
high speed connections.
The front panel of the OS6400-P48 chassis contains the following major components:
System status and slot indicator LEDs
(44) unshared 10/100/1000Base-T PoE ports
(4) shared combo 10/100/1000Base-T PoE ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
44
4
4
384 (stack of eight switches)
32 (stack of eight switches)
360W system supply (320 watts for PoE)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches without power shelf.
19.93 inches with power supply shelf and backup supply
8.8 lbs. (4.05 kg) without Power Supply
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
Default 15.4 watts per port
Configurable from 3 watts to 15.4 watts per port
It uses 360 watts P/S, the maximum available PoE power is
240 watts (less 1 watt per port of overhead) per unit.
Please refer to the Power Supply Specification Section for
more details.
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
OmniSwitch 6400-P48H
The OmniSwitch 6400-P48H is a stackable edge/workgroup switch offering 44 unshared 10/100/1000Base-T Power over
Ethernet (PoE) ports, as well as four combo ports individually configurable to be 10/100/1000 Base-T PoE or 1000 Base-X
high speed connections.
The front panel of the OS6400-P48H chassis contains the following major components:
System status and slot indicator LEDs
(44) unshared 10/100/1000Base-T PoE ports
(4) shared combo 10/100/1000Base-T PoE ports
(4) Combo SFP slots for 1000Base-X connections
Console port (RJ-45)
USB port (USB 2.0) (Future Release)
Alcatel.Lucent-ESD
Calabasas/CA./USA
44
4
4
384 (stack of eight switches)
32 (stack of eight switches)
510W system supply (470 watts for PoE)
128MB
256MB SDRAM
17.32 inches
1.73 inch
1 RU 1U x 17.32W x 10.63D
10.63 inches without power shelf.
19.93 inches with power supply shelf and backup supply
8.8 lbs. (4.05 kg) without Power Supply
5% o 95% non-condensing
32 to 113 (F) or 0 to 45 (C)
-40 to 167 (F) or 10 to 70 (C)
Operating altitude: sea level at 40 degrees, Celsius and
10000 feet at 0 degrees, Celsius
Storage altitude: sea level to 40000 feet
802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u
10 or 100Mbps (full or half duplex)
1 Gigabit per second (full duplex)
1 Gigabit per second (full duplex)
9,216 bytes
10/100/1000BASE-T and 1000BASE-X
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5,
EIA/TIA 568 or shielded twisted-pair (STP),
Category 5, 100 ohm
1000BaseT: unshielded twisted-pair (UTP), Category 5e
Default 15.4 watts per port
Configurable from 3watts to 15.4watts per port
Using the 510 watts P/S, the maximum available PoE
power is 390 watts (less 1 watt per port of overhead) per
unit.
Please refer to the Power Supply Specification Section for
more details.
100 meters
Alcatel.Lucent-ESD
Calabasas/CA./USA
Status LEDs
LEDs provide visual status information. These status lights are used to indicate conditions, such as hardware and
software status, primary role status (stacked configurations), power supply status, primary and secondary status (stacked
configurations), fan and temperature errors, slot number information, data speed, link integrity, and activity. Refer to the
diagram below for detailed information on LED states.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Internal Architecture
The OmniSwitch 6400-24 Internal Architecture
RS-232
INF
Stack A
Stack B
SDRAM
CPU
FLASH/Boot
HI-GIG
USB
PCI Bus
Packet Processor
Switching chip
Copper
PHY
Phy Combo
x4
1X4
SFP
Copper
PHY
Copper
PHY
23
24
4 x 1G BaseT or
100/1000 BaseX
COMBO PORTS
The base unit provides maximum 20 10/100/1000 Base-T ports and 4 combo ports. It is comprised of 1 Packet Processor
switching chip having different PHYs and is connected to CPU (400MHz) via 66MHz PCI Bus. The Host system includes
256MB SDRAM, 128MB Spansion Flash, RTC, Watchdog timer, Thermal detector, FAN failure detector, LED control
circuit, , and other glue logic. The Base unit used a 12VDC/48VDC output PWR. The on-board DC/DCs are used to
generate 5V/3.3V/2.5V/ 1.5V/1.25V/1.2V/1V from 12VDC.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stack A
Stack B
SDRAM
CPU
FLASH/Boot
HI-GIG
USB
PCI Bus
POE
Control
Board
Packet Processor
Switching chip
Copper
PHY
Phy Combo
x4
1X4
SFP
Copper
PHY
Copper
PHY
23
24
4 x 1G BaseT or
100/1000 BaseX
COMBO PORTS
The base unit provides maximum 20 10/100/1000 Base-T ports and 4 combo ports. It is comprised of 1 Packet Processor
switching chip having different PHYs and is connected to CPU (400MHz) via 66MHz PCI Bus. The Host system includes
256MB SDRAM, 128MB Spansion Flash, RTC, Watchdog timer, Thermal detector, FAN failure detector, LED control
circuit, , and other glue logic. The Base unit used a 12VDC/48VDC output PWR. The on-board DC/DCs are used to
generate 5V/3.3V/2.5V/ 1.5V/1.25V/1.2V/1V from 12VDC. The 48VDC is for POE power supply.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stack A
Stack B
SDRAM
CPU
FLASH/Boot
HI-GIG
USB
PCI Bus
Packet Processor
Switching chip
Packet Processor
Switching chip
HI-GIG
Phy Combo
x4
1X4
SFP
1
2
4 x 1G BaseT or
100/1000 BaseX
COMBO PORTS
Copper
PHY
5
6
Copper
PHY
Copper
PHY
Copper
PHY
23
24
Copper
PHY
25
47
26
48
The base unit provides maximum 44 10/100/1000 Base-T ports and 4 combo ports. It is comprised of 2 Packet Processor
switching chip having different PHYs and is connected to CPU (400MHz) via 66MHz PCI Bus. The Host system includes
256MB SDRAM, 128MB Spansion Flash, RTC, Watchdog timer, Thermal detector, FAN failure detector, LED control
circuit, , and other glue logic. The Base unit used a 12VDC/48VDC output PWR. The on-board DC/DCs are used to
generate 5V/3.3V/2.5V/1.5V/1.25V/1.2V/1V from 12VDC.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stack A
Stack B
SDRAM
CPU
FLASH/Boot
HI-GIG
USB
PCI Bus
POE
Control
Board
Packet Processor
Switching chip
Packet Processor
Switching chip
HI-GIG
Phy Combo
x4
1X4
SFP
Copper
PHY
Copper
PHY
Copper
PHY
Copper
PHY
Copper
PHY
23
25
47
24
26
48
4 x 1G BaseT or
100/1000 BaseX
COMBO PORTS
The base unit provides maximum 44 10/100/1000 Base-T ports and 4 combo ports. It is comprised of 2 Packet Processor
switching chip having different PHYs and is connected to CPU (400MHz) via 66MHz PCI Bus. The Host system includes
256MB SDRAM, 128MB Spansion Flash, RTC, Watchdog timer, Thermal detector, FAN failure detector, LED control
circuit, , and other glue logic. The Base unit used a 12VDC/48VDC output PWR. The on-board DC/DCs are used to
generate 5V/3.3V/2.5V/1.5V/1.25V/1.2V/1V from 12VDC. The 48VDC is for POE power supply.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stack A
Stack B
SDRAM
CPU
FLASH/Boot
HI-GIG
USB
PCI Bus
Packet Processor
Switching chip
Phy Combo
x2
2 RJ-45
Copper
23
24
2 - RJ45/SFP
Triple Speed
COMBO PORTS
Alcatel.Lucent-ESD
Calabasas/CA./USA
OS6400-BP-P
OS6400-BP-PH
OS6400-BP-PH modular 510W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis
connection cable, country specific power cord, power shelf and rack mounts.
OS6400-BP
OS6400-BP-D
OS6400-BP-D modular 120W DC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
A power shelf is used to holds two 360W (primary & backup) or one 510W (primary). PS Shelf/supplies plug directly in
the back of the unit and total unit + shelf depth is 44.6 cm/17.56inch.
Other possibility is power supplies can be connected with a cable for 2U configuration. A power shelf can hold one
backup 126W or 120W supply. The primary and backup PS on top of the unit and total unit + shelf depth is: 27 cm (10.63
inch).
2U configuration: the primary and backup PS on top of the unit Depth: 27 cm (10.63 in)
OS6400 Series Boilerplate Doc. Rev. B / October 2008 Page 49
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Power Cords
Because the power cord is the power supplys main disconnect device, it should be plugged into an easily accessible
outlet. In the event that your power cord is lost or damaged, refer to the specifications below.
Specifications
The power cord to be used with 115-Volt configuration is a minimum type SJT (SVT) 18/3, rated at 250Volts AC, 10 Amps with
a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug and the other end terminates in a NEMA 5-15P
plugs. The power cord to be used with 230-Volt configuration is minimum type SJT (SVT) 18/3, rated 250 Volts AC, 10 Amps
with a maximum length of 15 feet. One end terminates in an IEC 320 attachment plug and the other end terminates as required by
the country where it will be installed. European cords must be Harmonized (HAR) type.
DC-to-DC Power Cords
For DC-to-DC connections please refer to the Hardware Users Manuals for additional guidelines and information.
Refer to the information below for power plug types by region:
North America
United Kingdom / Ireland
Europe
Japan
Australia
India
Italy
Switzerland / Liechtenstein
Denmark / Greenland
Argentina
Temperature Management
The operating temperature of your switch is an important factor in its overall operability. In order to avoid a temperaturerelated system failure, your switch must always run at an operating temperature between 0 and 45 C (32 to 113 F).
To avoid chassis over-temperature conditions, follow these important guidelines:
Be sure that your switch is installed in a well-ventilated environment. To ensure adequate airflow, allow at least six inches of
clearance at the front and back of the chassis. In addition, leave at least two inches of clearance at the left and right sides.
Be sure that blank cover panels are installed at empty slot positions at all times. Blank cover panels help regulate airflow
and thus regulate the overall operating temperature in the switch. To check the switchs current temperature status, use the
show temperature command.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Pass-Through Mode
The pass-through mode is a state in which a switch has attempted to join a stack but has been denied primary, secondary, and idle
status. When a switch is in the pass-through mode, its Ethernet ports are brought down (i.e., they cannot pass traffic). Its stacking
cable connections remain fully functional and can pass traffic through to other switches in the stack. In this way, the pass-through
mode provides a mechanism to prevent the stack ring from being broken. However, note that when a switch comes up in
Pass-through mode, it should not be left unresolved. Pass-through mode is essentially an error state that should be corrected
immediately by the user.
Conditions that can trigger a switch to enter pass-through mode include:
Duplicate slot numbers have been assigned within the stack
The user has manually forced the switch into pass-through mode
Note. If a switch is forced into pass-through mode, the rest of the stack will not be disrupted.
Any elements in the stack not operating in pass-through mode continue to operate normally.
The most common reason for one or more switches to enter pass-through is duplicate slot number assignments within the stack. So,
in order to avoid pass-through mode, it is useful to keep track of the current saved slot numbers on all elements in the stack. Slot
number assignments are stored in the boot.slot.cfg file in the /flash directory of each switch.
If the stack is booted and the same slot number is discovered on two or more switches, the switch with the lowest MAC address is
allowed to come up and operate normally. Meanwhile, switches with the duplicate slot number and a higher MAC address come up
in pass-through mode.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stack Cabling
Switches in a stack are connected to each other by stacking cables. The valid cable lengths are 1.5m (4.9 feet), 60cm (23.6 inches),
and 30cm (11.8 inches). These stacking cables provide high-speed, dual-redundant links between switches in a stack.
Stacking cables for OmniSwitch 6400 Series switches can be connected in any pattern. In other words, the cable connected to
stacking port A of one switch can be connected to either stacking port A or stacking port B of the adjacent switch.
However, it is strongly recommended that the cabling pattern remains consistent across the stack.
In addition, for a stack to have effective redundancy a redundant stacking cable must be installed between the upper-most and
bottom-most switch at all times. This provides effective failover in the event of a stacking link or module failure within the stack.
Note. When planning the stack-cabling configuration, keep in mind that the switch connected to stacking port A of the primary
switch will be assigned the secondary management role by default.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Slot Numbering
For a stack of OmniSwitch 6400 Series switches to operate as a virtual chassis, each module in the stack must be assigned a
unique slot number. To view the current slot assignments for a stack, use the show Ni or show module commands.
The LED located on the left side of the chassis also displays the slot number on the front panel of each switch.
There are two ways stacking modules are assigned slot numbers:
Dynamic slot number assignment by the system software
Manual slot number assignment by the user
Alcatel.Lucent-ESD
Calabasas/CA./USA
Merging Stacks
Merging stacks involves connecting two or more operational stacks and attempting to reboot them as a single virtual chassis. In most
cases, errors will result. To merge stacks without causing errors, select one stack that is to remain up and running and then add
modules from the other stack(s) by following the steps below:
1 Make sure all switches are running the same software version.
2 Clear the saved slot information from all incoming modules. This will ensure that they are each assigned unique slot numbers when
they join the stack.
3 After clearing the saved slot information, power off all incoming modules.
4 Connect the stacking cables for all incoming modules to the existing, operational stack as required.
Be sure to provide stacking cable redundancy.
5 Power on all incoming modules.
Note. No more than eight switches can operate in a single stacked configuration at any time.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Reloading Switches
Reloading is essentially a soft boot of a switch. Users can reload stacked modules operating in any role i.e., primary,
secondary, idle, and pass-through. Refer to the sections below for more information.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Disabled
15.4watts
Default 15.4watts per port
Configurable from 3watts to 15.4watts per port
Using the 360watts P/S, the maximum available PoE power is 240 watts (less 1watt
per port of overhead) per unit.
Using the 510watts P/S, the maximum available PoE power is 390watts (less 1watt per
port of overhead) per unit.
Please refer to the Power Supply Specification Section for more details.
Low
Disabled
Enabled
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Availability Feature
The switch provides a broad variety of availability features. Availability features are hardware- and software-based
safeguards that help to prevent the loss of data flow in the unlikely event of a subsystem failure. In addition, some
availability features allow users to maintain or replace hardware components without powering off the switch or
interrupting switch operations. Combined, these features provide added resiliency and help to ensure that the switch or
virtual chassis is consistently available for day-to-day network operations.
Hardware-related availability features include:
Software Rollback
Backup Power Supplies
Hot Swapping
Hardware Monitoring
Software Rollback
Software rollback (also referred to as image rollback) essentially allows the OmniSwitch 6400 Series switches to return to
a prior last known good version of software in the event of a system software problem.
The switch controls software rollback through its resilient directory structure design (i.e., /flash/ working and /flash/certified).
Hot Swapping
Hot swapping refers to the action of adding, removing, or replacing components without powering off switches or
disrupting other components. This feature facilitates hardware upgrades and maintenance and allows users to easily
replace components in the unlikely event of hardware failure.
The following hardware components can be hot swapped:
Backup power supply
Backup power supply connector cables
SFPs
Alcatel.Lucent-ESD
Calabasas/CA./USA
Simplified Manageability
The OS6400s design provides all the benefits of managing a truly chassis-based switch including: simple and quick
software upgrades and switch configuration changes, single IP address for management, and a common look and feel with
the rest of the OmniSwitch solutions. The AOS-based OS6400 uses an intuitive CLI that is common across the
OmniSwitch line. A common and easy to use interface from the edge to the core can reduce total cost of ownership by
reducing training costs, simplifying and speeding up deployment, and making troubleshooting efforts more routine.
Following are the features on Simplified Manageabilty supported on OS6400:
Dual image and dual configuration file storage provides backup
Intuitive Alcatel-Lucent CLI with familiar interface reducing training costs
Extensive user manuals with examples
Easy to use, point-and-click web based element manager (WebView) with built-in help for easy configuration of
new technology features
Remote telnet management or secure shell access using SSH
Secured file upload using SFTP, or SCP
Human readable ASCII based config files for offline editing and bulk configuration
IGMPv1/v2/v3 snooping to optimize multicast traffic
BootP/DHCP client allows auto-config of switch IP information to simplify deployment
Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
Auto MDI/MDIX automatically configures transmit and receive signals to support straight through and crossover
cabling
DHCP relay to forward client requests to a DHCP server
SNMPv1/v2/v3
Integration with SNMP manager Alcatel-Lucent OmniVista for network wide management
Supports RFC 2819 RMON group (1-Statistics, 2-History, 3-Alarm & 9-Events)
Network Time Protocol (NTP) for network wide time synchronization
Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps within OmniVista
802.1AB Link Layer Discovery Protocol with MED extensions
Port-based mirroring for troubleshooting and lawful interception, supports four sessions with multiple sources-toone destination configuration
Policy based mirroring - Allows selection of the type of traffic to mirror by using QoS policies
Remote port mirroring
Port monitoring feature that allows capture of Ethernet packets to a file, or for on-screen display to assist in
troubleshooting
sFlow v5 support to monitor and effectively control and manage the network usage
Local (on the flash) and remote logging (Syslog)
GVRP for 802.1Q-compliant VLAN pruning and dynamic VLAN creation
Auto QoS for switch management traffic as well as traffic from Alcatel-Lucent IP phones
UDLD for detecting one way connections
Port based, port mirroring for troubleshooting and lawful interception, supporting four sessions with multiple
sources-to-one destination configuration
Port monitoring feature that allows capture of Ethernet packets to a file, or for on-screen display to assist in
troubleshooting
sFlow v5 support to monitor and effectively control and manage the network usage
Local (on the flash) and remote logging (Syslog)
GVRP for 802.1Q-compliant VLAN pruning and dynamic VLAN creation
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel-Lucents Access Guardian is a feature set that enables network-wide and user-based security by automatically detecting and
authenticating the 802.1x and non-802.1x devices associated with a single port, in any combination. This provides users proactive
security by preventing unauthorized network access or restricted access for remediation. In addition to improved network security,
Alcatel-Lucents Access Guardian reduces to zero the time a network administrator spends for adding or moving users.
In addition to proactive security provided by Alcatel-Lucents Access Guardian, the Alcatel-Lucent OmniVista 2770
Quarantine Manager provides reactive security by using alerts from third-party intrusion detection and prevention systems
to identify malicious attacks and then swiftly handling them through automatic containment and remediation.
Alcatel-Lucent CrystalSec is the security framework and architecture for Alcatel-Lucents enterprise networking
devices. CrystalSec provides security that is extended to and deployed through a mixture of technologies, external
appliances and security functions from the network core to the edge. CrystalSec offers the best-in-class VLAN
classification capabilities (MAC, IP subnet, protocol, DHCP, ACLs) and provides plug-and-play security domains
ensuring automatic containment and remediation support. CrystalSec framework consists of network device
hardening for security by default, Access Guardian for proactive security, Alcatel-Lucent OmniVista 2770 Quarantine
manager for reactive security, secure network services to ensure high availability, security certifications of third
parties, and partnerships with leading security application providers such as Fortinet.
WebView
IT person have long ago abandoned web management because it was too slow, inefficient and incapable. WebView
updates happen instantly removing the biggest obstacle to simple fast management. Alcatel-Lucent WebView gives true
real-world capabilities back to web browser element management and allows an IT staff of varying capabilities to
quickly master and configure new features. The web interface provides point and click ease with quick access to help.
WebView is full-featured and can configure and manage all switch features.
CLI
The AOS-based OS6400 uses an intuitive CLI that is common across the OmniSwitch line. A common and easy to use
interface from the edge to the core can reduce total cost of ownership by reducing training costs, simplifying and speeding
up deployment, and making troubleshooting efforts more routine.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Availability Percentage
90%
99%
99.9%
99.99%
99.999%
99.9999%
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Family
Module Name
MTBF-Hr.
MTBF-Yr.
Failure
Rate
OS6400-24
OS6400-24-System
OS6400-24-Power
OS6400-24-Fan
OS6400-24-LED/USB Daughter
OS6400-24-Main Board
187,933
400,000
2,561,265
30,406,453
417,061
21.45
45.66
292.38
3471.06
47.61
5321.0
2,500.0
390.5
32.8
2397.7
OS6400-P24
OS6400-P24-System
OS6400-P24-Power
OS6400-P24-Fan
OS6400-P24-LED/USB Daughter
OS6400-P24-PoE Daughter
OS6400-P24-Main Board
149,166
300,000
2,561,265
34,148,018
4,318,553
367,740
17.03
34.25
292.38
3898.18
492.99
41.98
6703.9
3333.3
390.5
29.3
231.6
2719.3
OS6400-U24
OS6400-U24-System
OS6400-U24-Power
OS6400-U24-Fan
OS6400-U24-LED/USB Daughter
OS6400-U24-SFP Daughter Board
OS6400-U24-Main Board
189,983
400,000
2,561,265
30,406,453
2,172,382
531,919
21.69
45.66
292.38
3471.06
247.99
60.72
5263.6
2,500.0
390.5
32.8
460.3
1879.9
OS6400-U24D
OS6400-U24D-System
OS6400-U24D-Power
OS6400-U24D-Fan
OS6400-U24D-LED/USB Daughter
OS6400-U24D-SFP Daughter Board
OS6400-U24D-Main Board
424,657
400,000
2,561,265
30,406,453
2,172,382
537,164
48.48
45.66
292.38
3471.06
247.99
61.32
2354.8
2,500.0
390.5
32.8
460.3
1861.3
OS6400-48
OS6400-48-System
OS6400-48-Power
OS6400-48-Fan
OS6400-48-LED/USB Daughter
OS6400-48-Main Board
158,837
400,000
3,130,434
30,406,453
265,937
18.13
45.66
357.36
3471.06
30.36
6612.6
2,500.0
319.4
32.8
3760.2
OS6400-P48
OS6400-P48-System
OS6400-48-Power
OS6400-48-Fan
OS6400-48-LED/USB Daughter
OS6400-48-PoE Board
OS6400-48-Main Board
158,837
300,000
3,221,188
29,554,286
3,100,790
177,652
18.13
34.25
367.72
3373.78
353.97
20.28
6295.7
3333.3
310.4
33.8
322.5
5628.9
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Heat Dissipation
The OmniSwitch 6400 Series
Notes: The power consumption measurements were obtained under fully loaded conditions.
Power consumption calculations are based on total power drawn from the AC line, in other words, the
Input Power = Output Power / Power Supply efficiency.
Chassis Pwr Consumption = Chassis Pwr / PS efficiency
1-watt 3.41214 BTU/hr.
Maximum Heat Dissipation for the Non-PoE Models:
OS6400-24: 180
OS6400-48: 269
OS6400-U24: 272
OS6400-U24D: 272
Maximum Heat Dissipation for the PoE Models:
OS6400-P24: 235 (1126)
OS6400-P48: 351 (1126)
Note: To calculate the heat dissipation for the PoE Models the following formula has been used:
Heat Dissipation = (Chassis Power Consumption / PS efficiency + Estimated power required to power
the PoE daughter card / PS efficiency) x 3.41214BTU/hr.
The reason that the PoE power budget has not been fully taken into account here, is that the heat is
dissipated on the PoE devices and not on the OmniSwitch 6400 chassis. Therefore, we only account for
the heat dissipated on the OmniSwitch 6400 chassis plus the heat dissipated on the PoE daughter card
inside the chassis including the P/S efficiency.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Chassis Air-Flow
Electrical Requirements
Name Plates
OS6400-24, OS6400-48 & OS6400-U24 comes with Internal AC power supply (90-220V AC), where
as OS6400-U24D comes with Internal DC power supply (36-72V DC).
OS6400-P24 & OS6400-P48 which are PoE models comes with 360W AC or 510W AC power
supplies.
OS6400 Series Supports redundant hot swappable power supplies. Following are the Backup
Power Supplies supported:
For Non-PoE models, it uses internal main power supplies and external backup power
supplies directly connected to the rear of the unit or remotely mounted.
For Non-PoE models, Backup power supplies use a power shelf to hold one 6400-BP (AC)
or one 6400-BP-D (DC) supply.
For PoE models, Power shelf holds one 510W AC, or two 360W AC power supplies.
A shelf and a remote cable is provided within the shipping box to rack a power supply on
top of the unit
Remotely connected power supply allows for smaller depth space requirement.
The OS6400 product family Backup Power Supplies cannot be used for the OS68xx
product family and vice-versa.
The chassis P/S fail-over to the backup P/S is transparent to the users and without a reboot
of the switch. The fail-over time is negligible.
OS6400-P24 & OS6400-P48 are the models on which PoE capability is supported.
360W (AC) and 510W (AC) power supplies are supposed to be used with PoE models.
Maximum estimated power for PoE with 360W power supply: 240W
Maximum estimated power for PoE with 510W power supply: 390W
Note: Power for all POE ports is defaulted to 15.4 watts per port and each port is configurable between
3watts to 15.4watts (Port setting is in Milliwatts (3000 to 15400)). Please note that the available PoE
power budget must not be exceeded.
Chassis Airflow: The fans pull air from the air intake vent located on the left-hand side of the chassis.
The air is directed horizontally through the chassis and past the circuit board. Airflow is then
exhausted through the fan vents at the right-hand side of the chassis.
Important. Maintain a clearance of at least two inches at the left and right sides. Otherwise, airflow
can become restricted. Restricted airflow can cause your switch to overheat; overheating can lead to
switch failure.
North America: NEMA 5-15-P (US), C22.2, No. 42 (Canada)
United Kingdom / Ireland: BS 1,363, Europe: CEE 7/7
Japan: JIS 8,303, Australia: AS 3,112, India: BS 546, Italy: CIE 2,316
Switzerland / Liechtenstein: SEV 1011
Denmark / Greenland: SRAF 1,962 / D816 / 87, Argentina: AR1-10P
OmniSwitch 6400 switches have the following general electrical requirements:
Each switch requires one grounded electrical outlet for each power supply installed in the.
OmniSwitch 6400 switches offer both AC and DC power supply support.
Refer to the Hardware Users Guide for more information.
For switches using AC power connections, each supplied AC power cord is 2 meters (approximately
6. 5 feet) long. Do not use extension cords.
Redundant AC Power: If possible, it is recommended that each AC outlet reside on a separate circuit.
With redundant AC, if a single circuit fails, the switchs remaining power supplies (on separate
circuits) will likely be unaffected and can therefore continue operating.
For switches using DC power, the user must assemble the DC power cord. Refer to the Hardware
Users Guide for more information.
A nameplate in the front of the chassis will identify the product model name & number and the vendor
(in this case Alcatel-Lucent).
A nameplate in the back will clearly identify the following:
Electric Ratings and U.S. Patent information along with their respective symbols.
PoE Models:
OS6400-P24: under 44dB
OS6400-P48: under 44dB
Non-POE Models:
OS6400-24: under 40dB
Alcatel.Lucent-ESD
Calabasas/CA./USA
FCC CRF Title 47 Subpart B (Class A limits. Note: Class A with UTP cables)
VCCI (Class A limits. Note: Class A with UTP cables)
AS/NZS 3548 (Class A limits. Note: Class A with UTP cables)
CE marking for European countries (Class A Note: Class A with UTP cables)
EN 55022: 1995 (Emission Standard)
EN 61000-3-3: 1995
EN 61000-3-2: 2000
EN 55024: 1998 (Immunity Standards)
EN 61000-4-2: 1995+A1: 1998
EN 61000-4-3: 1996+A1: 1998
EN 61000-4-4: 1995
EN 61000-4-5: 1995
EN 61000-4-6: 1996
EN 61000-4-8: 1994
EN 61000-4-11: 1994
IEEE802.3: Hi-Pot Test (2250 VDC on all Ethernet ports)
US UL 60950
IEC 60950-1:2001; all national deviations
EN 60950-1: 2001; all deviations
CAN/CSA-C22.2 No. 60950-1-03
NOM-019 SCFI, Mexico
AS/NZ TS-001 and 60950:2000, Australia
UL-AR, Argentina
UL-GS Mark, Germany
EN 60825-1 Laser, EN60825-2 Laser
CDRH Laser
China CCC
Alcatel-Lucent is pleased to announce that both the Alcatel-Lucent OmniSwitch 6400 Stackable
LAN switch and the Alcatel-Lucent OmniSwitch 9000 Chassis LAN switch are now Metro Ethernet
Forum (MEF) 9 and 14 certified.
MEF benefits for Alcatel-Lucent
MEF certification strengthens LAN product positioning in Metro Access deployments for residential
and business Ethernet services where the OmniSwitch 6400 and OmniSwitch 9000 switches are used
as customer premises equipment (CPE) in single or multi-tenant unit (STU/MTU) installations.
With this certification, Alcatel-Lucent now offers a fully MEF compliant end-to-end solution for
Ethernet services based on LAN OmniSwitch switches and MPLS Service Routers (7710, 7750, 7450).
What is MEF and what does it mean to be MEF certified?
The Metro Ethernet Forum (MEF) is a global industry alliance comprising more than 120
organizations whose mission is to accelerate the worldwide adoption of carrier-class Ethernet networks
and services. The alliance members develop technical specifications and implementation agreements to
promote interoperability and deployment of carrier Ethernet worldwide.
Test certifications obtained while running on the Alcatel-Lucent Operating System (AOS) version
6.3.1.R01 were:
1. MEF 9 for equipment vendors Ethernet services at the user network interface (UNI)
2. MEF 14 for equipment vendors focused on traffic management, service performance, and quality
of service (QoS)
Certifications tests indicate that the OmniSwitch 6400 and 9000 meet the carrier-class standard for
Ethernet Private Line (EPL), Ethernet Virtual Private Line (EVPL), and Ethernet LAN (E-LAN)
services at the UNI.
Service providers benefit from this certification because it:
Provides immediate assurance that the vendors equipment complies with MEF specifications
Saves money and time on complex testing between vendors, especially on global accounts
Establishes a solid foundation for carrier Ethernet ubiquity and interoperability
Alcatel.Lucent-ESD
Calabasas/CA./USA
JATE
Reliability Tests
Compliancy
RoHS Requirements
RoHS
Restriction on Hazardous Substances
NEBS-Level-3
Electrical Compliance
Electrostatic Discharge (ESD)
ISO-9001:2000 DNV Certification
Capability Maturity Model (CMM)
Mean Time Between Failure (MTBF) Standard
Quality Assurance and Customer Satisfaction
This equipment meets the requirements of the Japan Approvals Institute of Telecommunications
Equipment (JATE).
The OmniSwitch 6400 Series has been rigorously tested for:
Temperature
Humidity
Vibrations
Acoustic Noise
Altitude
Drop
Shock
Bench Handling
Please contact Alcatel-Lucent Internetworking Product Marketing and/or other Alcatel-Lucent
authorized representatives to obtain further data and/or a full test report.
1) RoHS-Alcatel's OmniSwitch 6400 family is among the first hardware to be in compliance with the
new European Community's directive Restriction on Hazardous Substances in Electrical and
Electronic Equipment (RoHS)
2) WEEE (Waste Electrical and Electronic Equipment)
3) NEBS Level 3 Certified All of the models
It is Alcatel-Lucent's position to be in compliance with the European R.O.H.S Directive 2002/95/EC
by the end of 2005. In doing so, all component selection decisions shall be influenced by offerings that
are a) ROHS compliant today or b) have planned date of cutover to ROHS compliance without
impacting the design (i.e. causing a redesign). It is Alcatel-Lucent's intention to choose
environmentally friendly component finishes that are today solder-able with SN63/Pb37 solders
(through late 2005), but can move to SnAgCu chemistries in Jan2006.
Compliance with Environmental procedure 020499-00, primarily focused on Restriction of Hazardous
Substances (ROHS Directive 2002/95/EC) and Waste Electrical and Electronic Equipment (WEEE
Directive 2002/96/EC).
Thus, all assemblies built after Dec. 31, 2005 shall be compliant with hazardous materials
requirements as defined in 020499-00. Upon request, documentation shall be provided certifying
compliance.
First Green switch in the Market RoHS compliancy
With the OmniSwitch 6400 family, Alcatel-Lucent will be the first switch manufacturer to be in
compliance with the new European Communitys directive Restriction on Hazardous Substances in
Electrical and Electronics Equipment (RoHS) which requires electric equipment to be free of six
hazardous substances by July 2006. Although, only required for European Union countries, the rest of
the World will benefit from these green switches by lessening the amount of hazardous substances
that find its way into the environment.
Compliance with regulation given in:
http://europa.eu.int/ISPO/infosoc/legreg/docs/8795eec.html
The product at end of life is subject to separate collection and treatment in the EU Member States,
Norway and Switzerland. Treatment applied at end of life of the product in these countries shall
comply with the applicable national laws implementing directive 2002/96EC on waste electrical and
electronic equipment (WEEE).
NEBS Level-3 Certified All of the OmniSwitch 6400 models supports NEBS Level-3.
The Electrical Compliance requirements are met through the EMC Compliance Standards and the
Safety Compliance Standards as indicated above.
The chassis has been thoroughly tested to withstand ESD test voltage conditions at any point on the
enclosure using the test setups and conditions in accordance with IEC 61000-4-2 (EN61000-4-2).
The OmniSwitch 6400 is compliant with the ISO-9001: 2000 DNV
Alcatel-Lucent's Software Engineering Institute (SEI) Capability Maturity Model (CMM) rating for
software processes meets the Level-2 (CMM-level-2) requirements.
All AOS OmniSwitches support a commercial equivalent of MIL-HDBK-217F-2:
MTBF Predictions are based on Telcordia (Bellcore Handbook Technical Reference) SR-332, Issue 1.
It is the policy of Alcatel-Lucent USA to satisfy the Quality expectations of our customers both
internal and external. Total Quality performance means understanding who the customer is, what the
customer expectations are, and meeting those expectations without error, on time, every time. Total
Quality is doing the right things right today and better tomorrow.
As part of Alcatels overall Quality Assurance process Alcatels Cross-functional team continuously
evaluates Cost, Time to Market, Communication, Customer satisfaction and Process improvements.
Necessary and appropriate actions are subsequently taken as required.
Alcatel-Lucent's Enterprise Solutions Division adheres to the ISO 9001 certification program. It
measures Customer Satisfaction and Key Process Indicators that are reviewed on regular intervals with
the Executive Management Team.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Temperature Sensors
Brownout/Blackout Tolerance or P/S Holt-up Time
Vibration: operating
Vibration: non-operating
The installation site must maintain a temperature between 0 and 45 C (32 and 113 F) and not
exceed 95 percent maximum humidity (non-condensing) at any time.
Standard ambient (outside environment or outside the chassis) operating temperature: 0 C to 45 C
Storage Temperature: -40 F to 167 F (-40C to 75C)
The Show Temperature command displays the current operating chassis ambient temperature, as
well as current temperature threshold settings for each of the modules in the stack.
In over-threshold temperature situations, the switch immediately sends a trap to the user.
Temperature errors LED is also provided in the front panel.
Temperature Sensor National Semi-Conductor LM77
The so-called brownout/blackout tolerance is what we call Power Supply Holdup Time:
The Holdup time across all switching and routing platforms power supplies is guaranteed to be:
20ms per each P/S at 100% load. Depending on the load and the input voltage, the holdup time can be
as high as 120ms to 280ms.
For RFP purposes please provide the Heat Dissipation (BTUs), Temperature, Fans and Chassis Air
Flow information as described elsewhere in this table.
Operating: 5% to 90% Relative Humidity (Non-condensing)
Storage: 0% to 95% Relative Humidity (Non-condensing)
Operating altitude: sea level at 40 degrees Celsius and 10000 feet at 0 degrees Celsius
Storage altitude: sea level at 40000 feet
Packed drop test: per MIL-STD-810 method 516.3 procedure IV from height of 30", one drop on each
side, no drop test at 4 corners is required;
Unpacked: 30G, 1/2 Sine, 11ms, 3 shocks in each direction along the 3 mutually perpendicular axes
(18 shocks total);
Unpacked bench handling: per MIL-STD-810 method 516.3 IV. Using one edge as pivot, lift the
opposite edge until one of the following occurs:
a) Chassis forms 45 angle with horizontal bench top.
b) Lifted edge is raised 4" above horizontal bench top.
c) Lifted edge is just below point of perfect balance.
Let chassis drop freely. Repeat using other practical edges of same horizontal face as pivot points for a
total of 4 drops. Repeat on other faces for a total of 4 times on each face, which the chassis could be
placed on practically during servicing.
0.25G, Sine, 5-500-5 Hz, maximum displacement of 0.060 inches, 1 octave/minute in its 3 mutually
perpendicular axes. Testing shall be repeated 4 times for each axis.
Packed: 1.6G, Sine, 5-500-5 Hz, maximum displacement of 0.060 inches, 1 octave/minute in its 3
mutually perpendicular axes. Testing shall be repeated 4 times for each axis;
Packed random: per Mil-Std-810, Category 1, Basic Transportation, 60 min. duration with vibration
level based on Fig. 514.3-1 through Fig. 514.3-3 in its 3 mutually perpendicular axes.
Warranty
Service & Support Programs & End Of Life
Lifetime Support
One year on Hardware, and 90-days on Software. Additional, optional support is available. Contact
your local Alcatel-Lucent representative for more information.
All versions of the Omni Stackable family come with a Limited Lifetime Hardware Warranty, limited
to the original owner, and will be provided for up to five (5) years. Faulty parts will be replaced via a
five (5) business days AVR (Advance Replacement) RMA.
Limited Lifetime Warranty does not apply to transceivers.
Standard Warranty Support
All Alcatel-Lucent's products come with a standard one-year warranty on hardware and a three-month
warranty on software.
Hardware DOA Warranty
If hardware fails within the first 30 days after delivery, call Alcatel-Lucent's Internetworking Division
Alcatel.Lucent-ESD
Calabasas/CA./USA
Hardware Warranty
Software Warranty
Life Span
Customer Service by 2:00 p.m. (Pacific Standard Time) and they will send a replacement part
overnight.
One-year Hardware Warranty
After the first 30 days, call Alcatel-Lucent's Internetworking Division Customer Service for a Return
material Authorization (RMA) and ship the part back to them for factory repair. The repaired unit will
be shipped back to you from our facility within 10 business days. Next day, advanced replacement is
available for a small expedited fee.
All-in-One Maintenance: All maintenance fix releases will be provided free of charge during the first
90 days.
Service & Support Programs & End Of Life (EOL)
In accordance with Alcatel-Lucents established Product Life Cycle policy, as well as its customer
satisfaction policy, Alcatel-Lucent will honor its obligations to customers currently under warranty or
with valid purchased service agreements relating to a product line for five (5) years (Software: three
(3) years and Hardware: five (5) years) beyond the EOL (End Of Life) of a product line.
Lifetime Support
All versions of the stackaable product families come with a Limited Lifetime Hardware Warranty,
limited to the original owner, and will be provided for up to five (5) years. Faulty parts will be replaced
via a five (5) business days AVR (Advance Replacement) RMA.
Limited Lifetime Warranty does not apply to SFPs.
Hardware Alcatel.Lucent warrants that, for the applicable warranty period of one (1) year for
hardware (a) Equipment shall, under normal use and service, be free from defects in material and
workmanship, and (b) Equipment shall materially conform to Alcatel.Lucents specification therefore
in effect on the date of shipment. The warranty period applicable to any product shall be one (1) year
from the date of shipment except if Alcatel.Lucent performs installation Services for any Product, then
the warranty period applicable to the product shall be one (1) year from the date Purchaser is deemed
to have accepted the Product in accordance with the Agreement. Hardware warranty only includes
Standard Repair or Replacement of Defective Parts (Standard R&R) support.
Lifetime Support
All versions of the stackable product families come with a Limited Lifetime Hardware Warranty,
limited to the original owner, and will be provided for up to five (5) years. Faulty parts will be replaced
via a five (5) business days AVR (Advance Replacement) RMA.
Limited Lifetime Warranty does not apply to SFPs.
Software & Firmware Alcatel.Lucent warrants that, for the applicable warranty period of ninety (90)
days for software, (a) Software media shall, under normal use and service, be free from defects in
material and workmanship, and (b) Software shall materially conform to Alcatel.Lucents specification
therefore in effect on the date of shipment. However, Alcatel.Lucent makes no warranty that any
software will operate uninterrupted or error free. Software warranty includes software bug fixes and
patches. Software upgrades and/or enhancements are not included as a part of Alcatel.Lucents
warranty, but can be purchased separately.
The Alcatel.Lucent Product Life Span depends on many conditions in the market place and varies from
platform to platform. Historically speaking, some platforms have been out in the market more than
seven (7) years and still continue to exist on our product portfolio, while others may have experienced
shorter life spans.
Alcatel.Lucent provides a full suite of maintenance offerings including Technical Assistance Center 24
x 7 x 365, Standard Repair or Replacement of Defective Units, Advanced Repair or Replacement, and
Emergency Call Out to dispatch a qualified Field Engineer to provide on-site support. An overview is
provided below that provides information regarding support options available.
SupportBasic: One year 7x24 phone. Includes e-service Web access, software releases, repair and
return of hardware to be completed in 10 business days from receipt.
SupportPlus: One year - 7x24 phone. Includes e-service Web access, software releases and advanced
shipment for next business day arrival of replacement hardware.
SupportTotal: One year - 7x24 phone. Includes eService Web access, software releases, and same day
4-hour on site hardware replacement (labor and parts) 7 days a week, 24 hours a day. Excludes NMS
and Authentication Services software.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Hardware Architecture
Up to 16 K (16,384) MAC Addresses is supported per system.
For the OmniSwitch 6400 family, the learned port security feature of the Alcatel-Lucent Operating
System allows up to 100 MAC addresses per port to be learned and acted upon, with up to 8,192 per
switch. The maximum number of MAC addresses the switch can learn for Layer 2 forwarding is
16,384 simultaneous MAC addresses.
2K routing table
1024
1024
512
512
128
2K
2K
2K
1 MB of buffering available per system
Each port type regardless of port speed is assigned a minimum and a maximum threshold buffer space.
Buffering is supported per port and there is a shared pool of up to 2MB available per system that is
based on an optimization algorithm that monitors buffer allocation per port. The buffering algorithm
could be optimized to allocate the unused buffering space for the inactive ports to the active ports. In
other words, inactive ports buffer space can be used by those ports that are active and require more
buffering space if need be.
* 1,048,575 bytes of buffering available per system.
* Two buffer allocation thresholds: LwmCosSetLimit and DynCellLimit. There is one of each type of
threshold per queue. Each queue is defined by a {port, COS} combination. There are 8 COS in our
system, the highest COS is reserved for internal traffic while the user can assign the other 7.
* LwmCosSetLimit is the Low Water Mark for buffer allocation per queue. Beyond this mark a queue
will tap into a dynamically shared buffer pool.
* DynCellLimit is the stop threshold for a queue to acquire more buffer from the pool.
CPU
BUS
Memory
Flash
USB Port (Future Release)
Main Switching Fabric ASIC
PHY
Connectors
Stacking
Console Port
Combo Ports
Both of the above thresholds have been pre-determined and calculated for optimal performance under
our benchmark. The default will automatically tap into shared buffer resources whenever the situation
demands it. If the users wish to customize the buffer sizes, we are usually able to accommodate the
request by analyzing their traffic pattern.
Free-scale MPC8248 processor (400MHZ)
Hi-Gig (Hi-Gig+ capable) & 32-bit 66MHZ PCI BUS & I2C BUS
256MB of SDRAM
Flash: 128MB Spansion Flash
Philips ISP1761 USB2.0 port on the front panel
BCM5632x (56322 or 56324)
XFP, SFP, and RJ45 connectors
Supports up to 8 unit stacking topology
Two built-in stacking ports to provide fault tolerant looped stacking configuration
10 Gbps full-duplex bandwidth per stacking port
RS-232 Console Port (RJ-45 connector).
The console-protecting chip SEMTEC LCDA15C-6 is used along with the RJ45 connector.
OS6400-24, -48, -P24, -P48, -P24H, -P48H: four Gigabit Ethernet SFP combo ports
OS6400-U24, -U24D: two Gigabit Ethernet SFP combo ports
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
50-60 Hz
DC power supply: 36 72 V DC (input)
Single main power supply to provide power for
chassis and POE
POE back up power
POE interface compatible with PowerDsine Ron chip
Low POE power (24 ports) 10watts/port
Low POE power (48 ports) 5watts/port
High POE power (24 ports)-16.25watts/port
High POE power (48 ports) 8.125watts/port
Redundant dual hot swappable Power Supplies.
Power supplies are able to attach to the rear of the unit
Insertion or removal of redundant power supply
Remote mounting of backup power supplies
Single BPS for chassis and POE
Modular 510W BPS for POE that fits in the OS6400
BPS shelf.
BPS Power Supply bundle (2.5U power shelf for
BPS, power cord, BPS, chassis connection cable)
Circuit breaker protected OS6400 units
Noise level
Operating Temperature
Storage Temperature
Humidity (Operating & Storage)
Loop protection against loop back
Cisco-like Proprietary UDLD
Support Cat 5, 5e, 6, and 6e
Capability to disable transmit function (or reset) of
each PHY individually
Capability to control the transmit function of the SFP
and XFP ports
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Insertion or removal of redundant power supply does not cause any power or service disruption to the
switch
Supported
Supported
Supported
Power supply bundle is 1U 360W or 510W + shelf_cable+19 Rack mounts ears .BPS can be either
connected at the back of the unit (360W) or on top of the unit (510W).
Supported
All OmniSwitch 6400 platforms: < 44dBa
0 C to 45 C (32 to 113 F)
- 40 C to 75 C (-40 to 167 F)
5% to 95% (non-condensing)
Supported
UDLD is supported.
support for monitoring the physical configuration of cables and detect unidirectional links
Supported
Supported
Supported
Alcatel.Lucent-ESD
Calabasas/CA./USA
Stacking feature
Stacking Guidelines
Stacking Redundancy
1.
Only support 8 stacks in a stacking configuration.
2.
The redundant stacking cable must be in place to support the full virtual Chassis.
3.
Auto Configuration of the stacks
4.
OmniSwitch 6400 units and OmniSwitch 6800 units should not be mixed in the same stack.
If the switches connected in a stack is having duplicate slot numbers one of the units will go into the
pass through mode. When a switch is in pass-through mode, its Ethernet ports are brought down but
stacking cable connections remain fully functional and can pass traffic through to other switches in the
stack. To avoid duplicate slot numbers, make sure that any modules being added to an existing stack
have been cleared of pre-assigned slot information.
When inserting switches into an existing stack, observe the following guidelines:
Once all units have been fully inserted, then close the stacking loop
Time measured for Synchronization of the stack on OS6400 (stack of 8): 7-8 min.
The new images are downloaded to the primary working directory. The reload working no rollback
which updates all the NIs working directories will take an activating time up to 5 minutes (i.e. size of
the configuration file does not impact the time).
After system is up and "copy working certified flash-synchro which synchronizes the whole stack
will take about 2 to 2.5 minutes (i.e. size of the configuration file does not impact the time)
As a remainder, the following features are impacted on takeover
-Spanning Tree may reconvergence after takeover, since base-Mac of the chassis will change (that Mac
change may cause a root bridge change)
-IPv4 routing: the router Mac change on takeover will cause the router to rediscover the new router
Mac
-Same for IPV6 (link local address changes on takeover)
-LACP protocol need to restart causing LACP ports to go down
Supported
Supported
Supported Trap (Sent every 5-min.)
Supported
Supported
Alcatel.Lucent-ESD
Calabasas/CA./USA
Data Plane
IEEE 802.3z & 802.3ab & 802.3u & 802.3
Auto-Detect on both Copper and Fiber
Simultaneous detection configuration priority
Media failure failover capability
802.3af on POE Models
Hot Swappable
Auto-negotiation/Auto sensing 10/100/1000
Auto-Detect the insertion and removal of the SFP
Hardware to operate at HiGig and HiGig+ speeds
UNH (or equivalent) operation standards
Supported
Supported
Supported
Supported
Supported: Power over Ethernet is supported on 10/100/1000BASE-T ports only
SFP and XFP optical transceivers are hot swappable
Supported
Supported
Supported (currently the HiGig operation is implemented, but the hardware is HiGig+ capable)
Supported
Ethernet Specifications
Connectors/ Cabling
Connector type
Connectivity
Connections supported
Cable supported
Ports Supported
Switching/Routing Support
Backbone Support
Port Mirroring Support
802.1Q Hardware Tagging
Maximum Transfer Unit -- MTU
Management: 1 RJ-45 console interface configured as DCE/DTE for operation, diagnostics, status,
and configuration information. Ship kit includes RJ-45 to DB-9 connector adaptor
AC power connector
10/1000/1000BASE-T copper ports: RJ-45
10/100/1000BASE-T copper ports with PoE: RJ-45
1000BASE-X SFP ports: LC with Removable/Pluggable transceiver SFP-MSA
24 & 48 x 10/1000/1000BASE-T copper ports: RJ-45
24 & 48 x 10/100/1000BASE-T copper ports with PoE: RJ-45
24 & 48 x 1000BASE-X SFP ports: LC with Removable/Pluggable transceiver SFP-MSA
10BASE-T hub or device; 100BASE-TX hub or device; 1000BASE-T hub or device
1000BASE-X hub or device,
10BASE-T: unshielded twisted-pair (UTP)
100BASE-TX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568 or shielded twisted-pair
(STP), Category 5, 100 ohm
1000BASE-T: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568 or shielded twisted-pair
(STP), Category 5, 100 ohm
Note: Category 6 cabling is also supported on the 10/100/1000BASE-T connections.
On 10/100/1000Mbps triple speed ports:
10Mbps speed: 100 meters on copper
100Mbps speed: 100 meters on copper
1000Mbps speed: 100 meters on copper
On GigE. Fiber:
SFP-GIG-LH70: up to 70km
SFP-GIG-LX: up to 10km
SFP-GIG-SX: up to 550m
802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
Gigabit Ethernet
Gigabit Ethernet
Layer 2 Switching/Layer 3 Routing (RIP only)
10/100/1000Mbps, Gigabit Ethernet ports
10/100/1000Mbps, Gigabit Ethernet ports
10/100/1000Mbps, Gigabit Ethernet ports
MTU parameter for Routers is not configurable.
The ASIC does not include the notion of an MTU that applies to an IP interface. Instead, it uses the
physical long-frame-size of the egress port as the MTU. When the ASIC attempts to forward a packet,
it tests the size of the packet against the physical long-frame-size of the egress port, if the packet is too
large, it forwards the packet to the CPU for fragmentation (or ICMP processing in the case of a packet
with Don't Fragment set).
GigE ports are set with a long-frame-size of 9216 bytes (jumbo frames).
Packets larger than the long-frame-size are dropped at ingress. The above (& default) values are the
maximum configurable values.
Packets that are forwarded from a 10/100 to a 10/100 port cannot ever be reported as too big via ICMP
Alcatel.Lucent-ESD
Calabasas/CA./USA
Inter-Frame Gap
Auto-negotiation
Crossover
Diagnostics
OmniSwitch 6400 Series supports the capability to reboot to support Diagnostics Mode for
Customers for hardware only troubleshooting
Alcatel.Lucent-ESD
Calabasas/CA./USA
P
P
m
Peeerrrfffooorrrm
maaannnccceee
Raw Fabric Capacity
OS6400-24: 48Gbps Full Duplex or 96Gbps aggregate
OS6400-P24: 48Gbps Full Duplex or 96Gbps aggregate
OS6400-U24: 48Gbps Full Duplex or 96Gbps aggregate
OS6400-U24D: 48Gbps Full Duplex or 96Gbps aggregate
OS6400-48: 96Gbps Full Duplex or 192Gbps aggregate
OS6400-P48: 96Gbps Full Duplex or 192Gbps aggregate
Stacking Capacity & Throughput
Throughput Performance:
Or Forwarding Rate
Per Stacked Switch
@64 Byte Packets
Assuming:
All traffic is forwarded through
The Switch Fabric ASIC
And where applicable:
Stacking (Stack A & Stack B) throughput
Theoretical packet per second (pps) rates for Ethernet packets is normally calculated by adding 20
bytes to each packet size to account for the 0.096 microseconds inter frame gap (equivalent to 12
bytes) and the preamble (eight bytes). Thus, the theoretical 10 Mbps, 100 Mbps, Gigabit and 10Gigabit Ethernet packet rate in packets per second (pps) for a packet of X bytes is defined by the
following formulas.
Throughput calculations assume 64 byte packets and the throughput rate is calculated per-port.
(1 Gbps) / ((8 bits/ byte) * (X+20)) = 1,488,095.23 pps
(100 Mbps) / ((8 bits/ byte) * (X+20)) = 148,809.52 pps
(10 Mbps) / ((8 bits/ byte) * (X+20)) = 14,880.95 pps
Since the primary benefit of any switch is speed, the most appropriate performance metric is
throughput, which is typically expressed in millions of packets per second (Mpps). Throughput
measures the number of packets per second (measured in millions) that a switch can process for
outbound (egress direction only) transmission to another device.
Throughput (at Layer-2 or Layer-3) = wire-speed Eth. ports * throughput rate per port
Note: The following assumes that all traffic is forwarded through the Main Switch Fabric ASIC.
The Stacking (Stack A & Stack B) supports 2 x 10-Gigabit Eth ports at wire-speed:
2 * 14,880,952.3 pps = 29,761,904.6pps (approx: 29.8Mpps)
Full Gigabit Ethernet:
The 24 Gigabit Eth ports throughput at wire-speeds:
24 * 1,488,095.23 pps = 35,714,285.52pps (approx: 35.7Mpps)
The 48 Gigabit Eth ports throughput at wire-speeds:
48 * 1,488,095.23 pps = 71,428,571.04pps (approx: 71.4Mpps)
Fast Ethernet with Gigabit Ethernet combo:
The 20 x 10/100Mbps Eth ports throughput at wire-speeds:
20 * 148,809.52 pps = 2,976,190.4pps (approx: 2.97Mpps)
The 44 x 10/100Mbps Eth ports throughput at wire-speeds:
44 * 148,809.52 pps = 6,547,618.88pps (approx: 6.54Mpps)
The 4 Gigabit Eth ports throughput at wire-speeds:
4 * 1,488,095.23 pps = 5,952,380.92pps (approx: 5.95Mpps)
Throughput numbers per models ( in stacked configuration):
OS6400-24/P24/P24H (24 GE ports + 2 10G stacking): 65.5Mpps
OS6400-U24/U24D (24 GE ports + 2 10G stacking): = 65.5Mpps
OS6400-48/P48/P48H (48 GE ports + 2 10G stacking): 101.2Mpps
Notes:
For stand-alone configuration throughput numbers on all models please substract 29.8Mpps
Alcatel.Lucent-ESD
Calabasas/CA./USA
Throughput Performance:
Or Forwarding Rate
Per Stacked Switch
@1518Byte Packets
Assuming:
All traffic is forwarded through
The Switch Fabric ASIC
And where applicable:
Stacking (Stack A & Stack B) throughput
Theoretical packet per second (pps) rates for Ethernet packets is normally calculated by adding 20
bytes to each packet size to account for the 0.096 microseconds inter frame gap (equivalent to 12
bytes) and the preamble (eight bytes). Thus, the theoretical 10 Mbps, 100 Mbps, Gigabit and 10Gigabit Ethernet packet rate in packets per second (pps) for a packet of X bytes is defined by the
following formulas.
Throughput calculations assume 1518 byte packets and the throughput rate is calculated per-port.
(1Gbps) / ((8 bits/ byte) * (X+20)) = 81,274.38 pps
(100 Mbps) / ((8 bits/ byte) * (X+20)) = 8,127.43 pps
(10 Mbps) / ((8 bits/ byte) * (X+20)) = 812.74 pps
Since the primary benefit of any switch is speed, the most appropriate performance metric is
throughput, which is typically expressed in millions of packets per second (Mpps). Throughput
measures the number of packets per second (measured in millions) that a switch can process for
outbound (egress direction only) transmission to another device.
Throughput (at Layer-2 or Layer-3) = wire-speed Eth. ports * throughput rate per port
Note: The following assumes that all traffic is forwarded through the Main Switch Fabric ASIC.
Stacking:
The Stacking (Stack A & Stack B) supports 2 x 10-Gigabit Eth ports at wire-speed:
2 * 812,743.82 pps = 1,625,487.64pps (approx: 1.62Mpps)
Full Gigabit Ethernet:
The 24 Gigabit Eth ports throughput at wire-speeds:
24 * 81,274.38 pps = 1,950,585.12pps (approx: 1.95Mpps)
The 48 Gigabit Eth ports throughput at wire-speeds:
48 * 81,274.38 pps = 3,901,170.24pps (approx: 3.9Mpps)
Fast Ethernet with Gigabit combo ports:
The 20 x 10/100Mbps Eth ports throughput at wire-speeds:
20 * 8,127.43 pps = 162,548.6pps (approx: 162.5Kpps)
The 44 x 10/100Mbps Eth ports throughput at wire-speeds:
44 * 8,127.43 pps = 357,606.92pps (approx: 357.6Kpps)
The 4 Gigabit Eth ports throughput at wire-speeds:
4 * 81,274.38 pps = 325,097.52pps (approx: 325.09Kpps)
Models:
OS6400-24/P24/P24H (24 GE ports + 2 10G stacking): 3.57Mpps
OS6400-U24/U24D (24 GE ports + 2 10G stacking): 3.57Mpps
OS6400-48/P48/P48H (48 GE ports + 2 10G stacking): 5.52Mpps
Notes:
For stand-alone configuration throughput numbers on all models please substract 1.62Mpps
System
Boot time
Management fail-over
Cold boot time in a stand-alone configuration when the switch can join the network and start passing
traffic: approximately 115 sec.
Cold boot time in a stackable configuration of up to 8 units when the switch(s) can join the network
and start passing traffic: approximately 115 sec.
Warm re-boot time in a stand-alone configuration when the switch can join the network and start
passing traffic: approximately 115 sec.
Warm re-boot time in a stackable configuration of up to 8 units when the switch(s) can join the
network and start passing traffic: approximately 115 sec.
The Fail-over time (Primary switch to Secondary switch in a stacked configuration) is:
Layer-2: 20 seconds maximum
Layer-3: 30 seconds maximum
Trap is sent (to the management station for the failure of the primary management) and log event is
logged upon primary management failure and after the redundant management unit takes over.
Approximately 65 sec
Alcatel-Lucent OmniSwitch 6400 switches are designed in such a way that is highly reliable under
extreme stress conditions. The OmniSwitch 6400 switches are rigorously tested to ensure that the
system is able to sustain heavy loads and allow for continued availability of all system resources.
The typical test setups involve:
Alcatel.Lucent-ESD
Calabasas/CA./USA
Running in normal operational mode where system is running under the specified CPU
threshold values.
Running above the CPU threshold values all the time.
Interfaces
Power over Ethernet
Stacking ports
20
N/A
20 10/100/1000
N/A
510W AC
OS6400-P48
44
N/A
44 10/100/1000
N/A
360W AC
OS6400-P24H
44
N/A
44 10/100/1000
N/A
510W AC
Alcatel.Lucent-ESD
Calabasas/CA./USA
*Combo ports are ports individually configurable to be 10/100/1000BaseT or 1000BaseX that can support SFP
transceivers for short, long and very long distances.
** Gig fiber interfaces support Gig SFP or 100BaseX SFP optical transceivers.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Layer-2/Layer-3 Switching
Root bridge priority / path cost:
Rule Precedence:
The bridge priority can only be in multiples of 4096 in the 32-bit mode or in MSTP mode.
Port
MAC
MAC range
Mobile-Tag
Protocol
IP
IPX
DHCP port
DHCP MAC
DHCP Generic
Mobile Tag
DHCP Mac
DHCP Port
DHCP Generic
Mac-Port-IP Binding
Mac-Port Binding
Port-Protocol Binding
Mac
Mac Range
Network Rule
Protocol
253 supported per system
VLAN Range Support
Up to 4094 VLANs for Flat Spanning Tree mode/MSTP and 253 VLANs for 1x1 Spanning Tree mode
are supported. In addition, it is now possible on the OmniSwitch 6400/6800/6850/9000 to specify a
range of VLAN IDs when creating or deleting VLANs and/or configuring VLAN parameters, such as
Spanning Tree bridge values.
Note: Although, up to 4094 VLANs has been configured and tested, we still recommend configuring
up to 1K (1,024) in a flat STP mode.
Is the native (untagged) VLAN required to be a specific VLAN?
Alcatel-Lucent Response: No.
Note: Alcatel-Lucent AOS OmniSwitch product family software refers to a native VLAN (a Cisco
term) as a default VLAN. Therefore, our default VLAN functionality is similar to that of native
VLAN as discussed here.
Is the management VLAN required to be a specific VLAN?
Alcatel-Lucent Response: No.
Can the management VLAN be tagged or untagged?
Alcatel-Lucent Response: YES.
Can the Native VLAN be excluded from an 802.1Q link (i.e., the ability to send only tagged traffic
over an 802.1Q link)?
Alcatel-Lucent Response: YES.
How many VLAN IDs does this device support?
Alcatel-Lucent Response: Comply with up to 4093.
Maximum Number of Tagged VLANs per Port: 4093
Alcatel.Lucent-ESD
Calabasas/CA./USA
VLAN Stacking
& Translation
RSTP Performance
Sub-second performance
Alcatel.Lucent-ESD
Calabasas/CA./USA
Dual protocols Mac-address is supported. The same Mac with both IP protocol (ip-e2) and
IPX protocol (ipx-e2) can be classified into 2 different VLANs.
Duplicate Mac on different mobile vlan is only supported for IP network rules or protocol
rules. For rules falling into the VLAN MAC table, only one Mac/vlan is supported. For
instance, the same Mac with 2 IPX networks 0x111 and 0x222 cannot be classified into 2
VLANs.
Tagged packets on mobile ports are first classified by their VLAN-ID. If you do not have
mobile-tag enabled for that vlan or a mobile rule to classify that packet to that vlan, the
packet is dropped.
1 K (1,024)
Note: Maximum number of MAC rules, Authenticated VLAN Users, Binding Rules, and 802.1x Users
all share the 1,024 MAC Rules
256 (Maximum of 256 IP Subnet rules are supported.)
6 (Note: Support for IP, IPX, DECNet, AppleTalk, SNAP, and Ethertype)
64
1 K (1,024)
Note: Maximum number of MAC rules, Authenticated VLAN Users, Binding Rules, and 802.1x Users
all share the 1,024 MAC Rules
Maximum of 1024 rules of combining MAC-Port-IP binding, MAC-Port binging, MAC, MAC Range,
and IPX Network rules (The available MAC rule pool is also shared by AVLAN and 802.1x)
4K
1 K (1,024)
Note: Maximum number of MAC rules, Authenticated VLAN Users, Binding Rules, and 802.1x Users
all share the 1,024 MAC Rules
Maximum number of 802.1x authenticated user per system: 1 K (1,024)
Maximum number of 802.1x authenticated user per port: 253
The system supports up to 1024 authenticated/mobile mac-addresses.
Note: Maximum number of MAC rules, Authenticated VLAN Users, Binding Rules, and 802.1x Users
all share the 1,024 Mac Rules
128
128
32 aggregates of up to 8 ports each, per stand-alone switch and/or across units
Support for static aggregate (aka OmniChannel)
Support for dynamic aggregate (IEEE 802.3ad)
LOAD BALANCE ALGORITHM
The load balance is the same for static and LACP link aggregation.
The load balance takes the 3 last bits of the source address and the 3 last bits of the destination address
and does an XOR. That gives a number between 0 and 7
Note that Link1 is the lowest port number, then Link2 is next port number
On the 6400's, the multiple ports must be on the same "Stack" of 6400's. They can be on separate
6400's but those 6400's must be cabled together with a Stacking cable and it must be functioning as a
stack.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Auto-negotiation
Traffic Control
Spanning Tree
When you want to flood a routed unicast packet to ALL ports of the egress vlan, which can be
achieved by creating a static ARP with a multicast Mac address.
The flooding is done in hardware (wire speed).
Using a policy rule, you can rate limit the flooding to a specific rate.
The UDP Relay will verify that the forward delay (elapsed boot time specified by the user) has been
met before Relaying the UDP packet.
If the relay is configured with multiple Next Hop addresses, then the packet will be sent to all next-hop
destinations. The UDP Relay shall also verify that the maximum hop count (also set by the user) has
not been exceeded. If either of these conditions is not meet, the UDP Relay will discard the
BOOTP/DHCP packet.
In Release 6.3.3.r01 the NBNS/NBDD and generic service has been added to the UDP port relay.
As indicated in the table for NBNS and NBDD user can specify which vlan the packets are forwarded
to. User can not specify the next hop IP address or the next hop address type.
For all other generic services, user is able to configure which vlan (up to 10 VLANs) the UDP packet
is to be forwarded to. User cannot specify the next hop IP address or the next hop IP address type.
Service
UDP Port Number
Configurable Options
BOOTP/DHCP
67/68 (Request /
1.
Next Hop Address
(Bootstrap Protocol/
Response)
2.
Forward delay
Dynamic Host
3.
Maximum hops
Configuration
Protocol)
NBNS/NBDD
137/138
1.
VLANs to forward
to
Generic services
Any number
1.
VLANs to forward
to
Speed (10, 100, 1000Mbps) and duplex mode (half or full)
IEEE 802.3x
Note: the switch does not support honoring the incoming (RX) IEEE 802.3x pause frames, but it does
support generating outgoing (TX) IEEE 802.3x pause frames
IEEE 802.1s / IEEE 802.1Q 2005 Multiple Spanning Tree Protocol (MSTP)
PVST+
Support of single and multiple instances for STP & RSTP BPDU Watch Guard
How many Multiple Spanning Tree Groups are supported? 253
Is one Spanning Tree per Group supported? Yes only in a STP 1x1 mode
Is one Spanning Tree per port supported? Yes
Is Single Instance Spanning Tree supported? Yes only in a STP flat mode
Does this device support any spanning tree enhancements (e.g., Root Guard, BPDU Guard, BPDU
Filtering, PortFast, etc.)?
Alcatel-Lucent Response: YES.
Note: Alcatel-Lucent AOS OmniSwitch product family software refers to Root Guard as Restricted
Role which is supported.
Note: Alcatel-Lucent AOS OmniSwitch product family software refers to BPDU Guard as BPDU
Shutdown Ports which is supported.
BPDU Filtering is supported.
Note: Alcatel-Lucent AOS OmniSwitch product family software refers to PortFast as EdgePort
which is supported.
Does this device support an instance of spanning tree per 802.1Q VLAN (commonly referred to as
PVST+)?
Alcatel-Lucent Response: Comply.
a) Flat Mode:
STP 1 Instance
RSTP 1 Instance
MSTP 1 CIST and 16 MST Instances
b) 1x1 Mode:
STP 253 Instances
RSTP 8 Instances
Alcatel.Lucent-ESD
Calabasas/CA./USA
Spanning Tree
Root bridge priority / path cost
Port Monitoring
Port Mapping
a)
Default spanning tree mode is RSTP (IEEE 802.1w)
b)
The bridge priority can be any value between 0 and 65535 for STP and RSTP protocol in
the 16 bit mode. By default, spanning tree follows the 16 bit path cost.
c)
The bridge priority can only be in multiples of 4096 in the 32 bit mode or in MSTP mode.
d)
MSTP can support 32 bit mode per standard.
e)
Changing STP protocol to MSTP will reset all priority and path cost of a bridge to default
The default port path costs are: (IEEE Std 802.1D-1998- 16 Bit)
Port Speed
Path cost
10M
100
100M
19
1000 M
4
The default port path costs are: ( IEEE Std. 802.1Q-2005 32 Bit)
Port Speed
Path cost
10M
2000000
100M
200000
1000 M
20000
The default link aggregation path costs are (16 Bit):
Linkagg speed
Linkagg size
Path cost
2
60
10M
4
40
8
30
2
12
100M
4
9
8
7
1000M
N/A
3
The default link aggregation path costs are (32 Bit):
LinkAgg speed
LinkAgg size
Path cost
2
1200000
10M
4
800000
8
600000
2
120000
100M
4
80000
8
60000
1000M
2
12000
4
8000
6000
The same unit cannot support both mirroring and monitoring configuration i.e. a user cannot have a
port monitoring and a port mirroring session on the same unit.
Only one monitoring session at a time across the entire system
Only the first 64 bytes of the packet can be monitored. Due to the port monitoring file size, the system
can only store the first 2K packets (i.e. 140K/64 = 2187)
The port monitoring is not supported on the linkagg ports.
Enabling the monitoring function affects the performance. Consequently, Port Monitoring performance
is not at wire-rate.
Port mapping feature is supported on OS6400/6800/6850/9000. Following are the limitations for the
feature.
An aggregable port of a link aggregation group cannot be a mapped port and vice versa
Alcatel.Lucent-ESD
Calabasas/CA./USA
The main advantage of Loop-back interface is a more reliable Network Management path through
OmniVista or an NMS station.
Loopback0 is the name assigned to an IP interface to identify a consistent address for network
management purposes. The Loopback0 interface is not bound to any VLAN; therefore it always
remains operationally active. This differs from other IP interfaces, such that if there are no active ports
in the VLAN, all IP interfaces associated with that VLAN are not active. In addition, the Loopback0
interface provides a unique IP address for the switch that is easily identifiable to network management
applications.
There are 2 kind of server clusters:
-Server Farm: The traffic is truly destined to the Server Farm and the destination IP is the Virtual IP of
the Server Farm. Each server is also configured with a Loopback Interface for the Virtual IP
-Firewall Cluster: the traffic is not destined to the server, the server simply inspects the packet and
sends it back if accepted by the Firewall policies
Current limit of servers (on a per cluster basis) is 16.
Current limit of cluster (on a per switch basis) is 16.
20 Probes
Sever Load Balancing (SLB) Health monitoring is performed by the CPU of the Primary Management.
LOAD BALANCING HASHING
In both VIP and Condition SLB, the traffic is balanced among the servers using an hash algorithm
based on IPSA and IPDA.
Internally, each active server is seen as a host ECMP route to reach the cluster.
Therefore, the load balancing is the same than the ECMP load balancing.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
IP Routing
Static routing
RIP v1 & v2
Multicast
IGMP v1, v2 & v3 snooping
Network Protocol
TCP/IP stack
ARP
DHCP relay
Generic UDP relay per VLAN
IP Routing
Static routing
RIP/SAP
DHCP Option 82 relay agent information
Q-in-Q (Vlan stacking)
Ethernet OAM compliant with 802.1ag version 7.0
Hardware:
Maximum number of IPv4 routes that can be held in the software routing table: 1024
Maximum number of IPv6 routes that can be held in the software routing table: 512
Maximum number of ARP entries that can be held in software ARP table: 16K
Tested figures:
The IPv4 RIB and the IPv6 RIB are separate tables with different capacities.
RIB:
The RIB is 96K (IPv4).
FIB:
There are actually two IPv4 FIBs and IPv6 FIBs.
One is the software FIB which is separate for IPv4 & IPv6 and the second one is the hardware FIB
which is common for both IPv4 and IPv6.
In the hardware FIB there is room for 1024 IPv4 entries or 512 IPv6 entries.
Static Routes -1k IPv4 / 512 IPv6 and RIP Routes 1k IPv4 / 512 IPv6
1 K (1,024) routes
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
IPv6 routes
Max number of IPv6 static routes
IPv6 interfaces
RIPng
ARP Table: Max number of ARP entries per system
IPv6 REDISTRIBUTION
Layer-3 forwarding, known IP@64 bytes pkt
Layer-3 forwarding, known IP@1518 bytes pkt
Layer-3 forwarding, known IP@ Jumbo pkt
Trunking 2 VLANs, 64 Bytes pkt
Trunking 2 VLANs, 1518 Bytes pkt
IP Routing
Static routing
RIPng
Hardware:
Maximum number of IPv4 routes that can be held in the software routing table: 1024
Maximum number of IPv6 routes that can be held in the software routing table: 512
Maximum number of ARP entries that can be held in software ARP table: 16K
The total number of IPv6 routes supported in hardware (with no IPv4 routes) is 512
512 routes
The recommended number of IPv6 interfaces is 16
The total number of RIPng interfaces is 16.
Up to 8K (8,192) L3 ARP entries are supported.
(a) Maximum number of route-maps that can be created on an OS6400 router: 200
(b) Maximum number of route-map sequences that can be created on an OS6400 router: 400
(c) Maximum number of IPv6 access-lists that can be configured on an OS6400 router: 200
Wire-speed
Wire-speed
Wire-speed
Wire-speed
Wire-speed
Alcatel.Lucent-ESD
Calabasas/CA./USA
Multinetting
Multinetting
This feature allows IP traffic from multiple subnets to
coexist on the same VLAN. A network is said to be
multinetted when multiple IP subnets are brought
together within a single broadcast domain (VLAN). It
is possible to assign up to eight different IP interfaces
per VLAN. Each interface is configured with a
different subnet.
Supported features:
A network is said to be multinetted when multiple IP subnets are brought together within a single
VLAN. For example, one may configure the subnet 192.168.1.0/24 and 194.2.10.0/24 to run on the
same switch interface. In other words, traffic from the 192.168.1.0 subnet and traffic from the
194.2.10.0 subnet would coexist on the same physical VLAN.
Within a Layer 2 environment, the traffic is broadcast between all subnets configured in the same
VLAN. Layer-3 traffic is routed between the configured subnets in the same VLAN.
Possible uses for Multinetting:
Subnet renumbering used during transition from one addressing scheme to another to
maintain connectivity.
Ability to support more hosts on one physical link used to add more hosts to a broadcast
domain than the addressing scheme allows.
Supporting multiple subnets on one interface where configurations do not allow complete
separation of subnet traffic. For example, a college campus may have departments where
users are connected to a switch via hubs. Connected to each of the hubs are users
configured to be in different subnets. The hubs are connected to the switches using portbased vlan configuration. Network administrators use Multinetting so they do not have to
worry about re-cabling or reconfiguring ports for users in different subnets.
All existing dynamic routing protocols, routing between each of the multinetted subnets in
one VLAN and routing between each of the multinetted subnets and other VLANs
DHCP is only supported on the primary interface of the multinetted vlan. All devices are assigned to
the same scope (the one for the primary interface).
1K Routes
1K Host entries
64 IPX interfaces
Static routing (256 routes)
RIP/SAP, 1K routes
5000 RIP and SAP entries each are supported.
IPX routing is limited to 1900 packets per second per NI.
Each NI can independently route up to 1900 p/s.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Policy/QoS
QoS / ACLs
Priority Queues
Traffic Prioritization
Bandwidth Management
Queue Management
Features summary:
802.1p classification
TOS/DSCP classification
Ethertype classification
IP protocol classification
TCP Flag classification and established for implicit reflexive tcp flows
Port disable rules to shutdown a port when incoming packets matches a rule
Rule logging
User port profiles to filter and shutdown ports for BPDUs, IP spoofing and routing
protocols
IGMP ACLs
L1 conditions: source port, destination port, source port group, destination port group
L2 conditions: source mac, source mac group, destination mac, destination mac group,
802.1p, ethertype, and source vlan (Destination vlan is not supported).
L3 conditions: ip protocol, source ip, source network group, destination ip, destination
network group, TOS, DSCP, ICMP type, ICMP code.
L4 conditions: source TCP/UDP port, source TCP/UDP port range, destination TCP/UDP
port, destination TCP/UDP port range, service, service group, tcp flags
The following actions are available:
Priority
802.1p/TOS/DSCP Stamping
802.1p/TOS/DSCP Mapping
Maximum bandwidth
Redirect Port
Note: Condition combinations and Action combinations are also supported.
Eight hardware based queues per port
Flow based QoS
Internal & External (aka remarking) prioritization
Port & Flow based ingress policing with 64kbps granularity
Port based egress shaping, with 64kbps granularity
Configurable de-queuing algorithm
Strict Priority
Alcatel.Lucent-ESD
Calabasas/CA./USA
More than one packet can be logged depending on the rate of the traffic (because of time
required by the CPU to stop the sampling).
Log interval less than 5 seconds will be accepted by CLI , but logging will be done every 5
sec
Alcatel.Lucent-ESD
Calabasas/CA./USA
Servicing
SPQ or W
SPQ or W
SPQ or W
SPQ or W
SPQ or W
SPQ or W
SPQ or W
SPQ or W
Port shaping
Shaping limits the bandwidth on the egress port. Shaping implies that the shaping function controls the
rate at which the egress port sends the packets, regardless of egress queues. The granularity is 64Kbps.
Queue shaping
You can also configure maximum and minimu bandwidth on a per egress queue basis.
Configuring an egress queue max bandwidth will shape priority traffic mapped to that queue.
Configuring an egress queue min bandwidth will guarantee that bandwidth for priority traffic mapped
to that queue.
When a queue has a minimum bandwidth configured, traffic within that bandwidth has the HIGHEST
priority, regardless the servicing mode or the priority of that queue.
Limitation:
The egress bandwidth shaping is only on a per port basis; the system cannot do a per flow basis egress
bandwidth shaping.
Using policy rule with maximum bandwidth action, you can limit the bandwidth on the ingress.
Policing implies dropping the traffic when the programmed rate is exceeded. Policing is on a per flow
basis. The granularity is 64kpbs.
You can do the following:
Ingress flow based rate limiting by configure a policy defining that flow
Ingress rate limiting is done at the ingress NI. Policies spread out on multiple NIs will make
the total egressing rate to be higher than the configured value (up to the N time the limit
where N is the number of NI being spread)
Show active policy rule will count the packets that exceed the rate limiting, not the
packets that matches the rule
On untrusted ports the priority/queue of the incoming packet is based on the port default 802.1p
value. By default, the port default 802.1p value is 0 making traffic to be mapped to Q0 (best effort).
Also, regardless or bridging or routing:
Change the priority of all traffic from that port. That is like a port priority
Set the 802.1p value in the packet to that port default 802.1p
Changing the port default DSCP will:
Set the DSCP value in the packet to that of the port default DSCP
Notes:
On untrusted port, the default 802.1p defines the default internal priority for all packets.
Untagged packets on untrusted ports get an 802.1p value from the port default 802.1p (if going out on
tagged interface).
Limitation:
On untrusted ports, if the packet matches a policy rule, the DSCP in the packet is unchanged; it is not
set to the port default dscp
On trusted ports the priority/queue of the incoming packet is based on the ingress packet 802.1p or
ToS/DSCP value.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Regardless the condition or classification, the following stamping/mapping actions are allowed
Stamp 802.1p
Stamp DSCP
Internal Priority is always based on the new 802.1p or TOS/DSCP being stamped/mapped
Stamp/map TOS/DSCP also gives internal priority for non IP packets matching the rule
Mapping rules takes one TCAM rule entry for each entry in the map group
If both 802.1p and TOS/DSCP are stamped in a policy rule, priority is based on the stamped
802.1p value
Notes:
On trusted ports, stamping/mapping a tos/dscp also change the 802.1p value in the packet to the packet
ToS value.
If the policy rule has both a 802.1p stamp/map action and a priority action, the packet priority comes
from the stamped/mapped 802.1p value, not the priority action.
Policy Based Routing (PBR) allows a network administrator to define QoS policies that will override
the normal routing mechanism for traffic matching the policy condition.
Note. When a PBR QoS rule is applied to the configuration, it is applied to the entire switch, unless
you specify a built-in port group in the policy condition. Policy Based Routing may be used to redirect
traffic to a particular gateway based on source or destination IP address, source or destination network
group, source or destination TCP/UDP port, a service or service group, IP protocol, or built-in source
port group. Traffic may be redirected to a particular gateway regardless of what routes are listed in the
routing table.
Note that the gateway address does not have to be on a directly connected VLAN; the address may be
on any network that is learned by the switch.
Note. If the routing table has a default route of 0.0.0.0, traffic matching a PBR policy will be redirected
to the route specified in the policy. Policy Based Routing may be used to redirect untrusted traffic to a
firewall. In this case, note that reply packets will be not be allowed back through the firewall.
Policy Based Routing may be used to redirect traffic to a particular gateway based on source or
destination IP address, source or destination network group, source or destination TCP/UDP port, a
service or service group, IP protocol, or built-in source port group. Traffic may be redirected to a
particular gateway regardless of what routes are listed in the routing table.
Note that the gateway address does not have to be on a directly connected VLAN; the address may be
on any network that is learned by the switch.
Multiple policy actions can be combined together within a single rule. The policy actions that can be
combined in the same rule are:
Priority
Stamping/mapping
Max BW
Redirect Port
A flow can match multiple rules but ONLY the action for the highest precedence-matching rule is then
enforced. When rule are configured without precedence (default precedence is 0), the first created rule
has the highest precedence.
Alcatel.Lucent-ESD
Calabasas/CA./USA
IPv6 Actions
Port Disable
Next header. Policies specifying the NH parameter, classify based on the first NH value
present in the V6 header of the IPV6 packet
Flow label
ToS/DSCP
source vlan
802.1p
source Mac
destination Mac
source port
Priority
802.1p/TOS/DSCP Stamping
802.1p/TOS/DSCP Mapping
Maximum bandwidth/depth
TOS, DSCP
Source vlan
Source slot/port
Alcatel.Lucent-ESD
Calabasas/CA./USA
High Availability
High Availability
The switch provides a broad variety of availability
features. Availability features are hardware- and
software-based safeguards that help to prevent the
loss of data flow in the unlikely event of a subsystem
failure. In addition, some availability features allow
users to maintain or replace hardware components
without powering off the switch or interrupting switch
operations. Combined, these features provide added
resiliency and help to ensure that the switch or virtual
chassis is consistently available for day-to-day
network operations.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Security
Advanced Security
Partitioned Management PM: Protected multiple user access control (i.e. the switch
provides a full suite of commands that allow the user to create and modify User IDs and
Passwords (multiple administrative profiles) for access to switch management). The PM
feature utilizes an on-board database, or RADIUS, LDAP authentication servers (user
profiles are stored within these servers).
Authenticated Switch Access (ASA): the ASA feature (user access control or device access
control) with Secure Access Logging (AAA service) utilizes an on-board database,
RADIUS, LDAP, or ACE authentication servers
IEEE 802.1x industry standard port based authentication challenges users with a password bef
allowing network access
o
IEEE 802.1x multi-client, multi-VLAN support for per-client authentication and
VLAN assignment
Port Binding
Authenticated VLAN that challenges users with username and password and supports
dynamic VLAN access based on user
Learned Port Security or MAC address lockdown allows only known devices to have
network access preventing unauthorized network device access
Secure Shell (SSH), Secure Socket Layer (SSL) for HTTPS and SNMPv3 for encrypted
remote management communication
Access Control Lists (ACLs) to filter out unwanted traffic including denial of service
attacks; Access control lists (ACLs) are per port, MAC SA/DA, IP SA/DA, TCP/ UDP
port; Flow based filtering in hardware (L1-L4)
Alcatel.Lucent-ESD
Calabasas/CA./USA
IP security enhancement
802.1X/Device Authentication
The following type of packets are processed in software and will increase the CPU usage:
BPDUs
RIPv2
Detect multicast packets with a Unicast destination IP and Multicast destination MAC
address
Alcatel.Lucent-ESD
Calabasas/CA./USA
ACLMAN
DHCP Snooping
Traffic Filtering
User Authentication
Switch protocol security
Switch management
User-port shutdown profile
Port Disable
3.Alcatel-Lucent dynamic
First packet is untagged, second packet onward is tagged.
ACLMAN is a function of the QoS subsystem in AOS. ACLMAN allows a network administrator to
manage ACLs using default industry standard syntax on Alcatel-Lucent switches. To enforce the
ACLs, ACLMAN translates default industry standard syntax into Alcatel-Lucent QoS filtering policies
in a manner transparent to the ACLMAN user.
ACLMAN provides the following:
The ability to import text files from flash containing default industry standard ACL syntax
An interactive shell emulating the default industry standard CLI ACL command syntax
ACLMAN supports the following default industry standard ACL types:
Standard ACLs
Extended ACLs
Numbered ACLs
Named ACLs
Number of DHCP Bindings per ASIC: 126
Number of DHCP Bindings per port: 126
Flow based filtering in hardware (L1-L4)
IEEE 802.1x, with Group Mobility & Guest VLAN support
MAC based Authentication for non-802.1x host
Authenticated VLAN (web & telnet based authentication)
MD5 for RIPv2 and SNMPv3
SSH for secure CLI session and SSL for secure HTTP session
Local authentication database
Remote authentication RADIUS, LDAP & ACE servers
Instead of filtering packets, you can configure a user-port profile to administratively disable an
interface upon reception of spoof/BPDUs/rip packets. To make the interface operational again, the port
must be unplugged/plugged back or disabled/enabled using interfaces s/p admin down and
interfaces s/p admin up. Also, a SNMP trap will be sent when an interface goes down because of the
user-port shutdown profile.
You can configure a Port Disable rule to administratively disable an interface when matching a
policy rule. To make the interface operational again, the port must be unplugged/plugged back or
disabled/enabled using interfaces s/p admin down and interfaces s/p admin up.
Also, a SNMP trap will be sent when an interface goes down when matching a port disable rule
Alcatel.Lucent-ESD
Calabasas/CA./USA
The system sustained Denial of Services attacks from Nessus and no switch anomalies (crash or
service interruptions) were observed while running the attacks. Nessus has reported the following
vulnerabilities:
alya.cgi (Backdoors)
AnalogX denial of service (Denial of Service)
cisco http DoS (Denial of Service)
AnalogX denial of service by long CGI name (Denial of Service)
Jigsaw webserver MS/DOS device DoS (Denial of Service)
Trend Micro OfficeScan Denial of service (Denial of Service)
BadBlue invalid GET DoS (Denial of Service)
DCShop exposes sensitive files (General)
OpenSSH < 3.0.1 (Gain a shell remotely)
Quicktime/Darwin Remote Admin Exploit (Gain a shell remotely)
OpenSSL overflow via invalid certificate passing (Gain a shell remotely)
TESO in.telnetd buffer overflow (Gain root remotely)
OpenSSH AFS/Kerberos ticket/token passing (Gain root remotely)
OpenSSH <= 3.3 (Gain root remotely)
OpenSSH < 3.7.1 (Gain root remotely)
Oracle Application Server Overflow (Gain Root Remotely)
AliBaba path climbing (Remote file access)
Note:
The Nessus suite was tested under the following platform.
The following are the versions of Nessus and the Linux platform used.
Nessus version: 2.2.0
Linux OS: Fedora Core Release 1
The reported failures are not a threat but a check against the switch which the test Nessus suite
reported as vulnerable. For example, when running port scan Nessus will report failures against ports
that should not respond or be open but are internal ports leveraged by the subsystem. As the report
stated there is no anomalies detected or crashes from the scan.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Management
Simplified Manageability
Configuration Mode
The following is only a highlight of the advanced network and switch management features supported
by the OmniSwitch 6400 Series:
OmniVista NMS: Alcatel-Lucents Single voice, data and services network management
including OneTouch QoS and SecureView.
Through the application of a comprehensive QoS feature set, the AOS OmniSwitch product
family is capable of supporting converged applications such as the VoIP
Logging into the Switch through Telnet, FTP, HTTP, SSH, SSL, and SNMPv1&v2&v3
o
Remote telnet management or secure shell access using SSH
o
Secured file upload using SFTP, or SCP
o
SNMPv1/v2/v3
Policy Servers; Authentication Servers such as RADIUS, LDAP, and ACE servers
Intuitive Alcatel-Lucent CLI for familiar interface and reduced training costs
WebView Element Mgmt: Easy to use point & click web based element manager with
built-in help for easy configuration of new technology features
Human readable ASCII based config files for offline editing and bulk configuration
Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
Auto MDI/MDIX automatically configures transmit and receive signals to support straight
thru and crossover cabling
Alcatel.Lucent-ESD
Calabasas/CA./USA
System Maintenance
SNMP Traps
Port Monitoring
Port Mirroring
Serial Console port for local & remote (modem dial up) access (RJ45)
Console Port / Serial Connection:
The console port, located on the chassis front panel, provides a console connection to the switch
and is required when logging into the switch for the first time. By default, this RJ-45 connector
provides a DTE console connection.
Working Directory
Certified Directory
XModem and FTP (File Transfer Protocol) / SFTP (Secure FTP) / SCP
65
Greater than 1000
50
50
4
4
4
4 concurrent sessions
Syslog to Multiple Hosts: You can send Syslog files to multiple hosts, up to a maximum of 4 servers.
8
13
30
48
You can configure a Port Disable rule to administratively disable an interface when matching a
policy rule. To make the interface operational again, the port must be unplugged/plugged back or
disabled/enabled using interfaces s/p admin down and interfaces s/p admin up.
Also, a SNMP trap will be sent when an interface goes down when matching a port disable rule.
A pktDrop SNMP trap will be sent out to the SNMP station when a port goes down because of a
user-port shutdown profile or a port disable rule.
The same unit cannot support both mirroring and monitoring configuration i.e. a user cannot have a
port monitoring and a port mirroring session on the same unit
Only one monitoring session at a time across the entire system
Only the first 64 bytes of the packet can be monitored. Due to the port monitoring file size, the system
can only store the first 2K packets (i.e. 140K/64 = 2187)
Enabling the monitoring function affects the performance. As every single monitored packet is
enqueued to the CPU, the Q-Dispatcher has to de-queue and look at each and every packet to
determine if the destination is PMM (port monitoring module). The performance will be limited by the
efficiency of Q-Dispatcher de-queuing speed and also the speed at which PMM can get the packets
from Q-Dispatcher through IPC. Due to the performance limitations, monitoring wire rate traffic is not
possible at this time.
The packets coming to CPU are always tagged and undergo the same FFP modifications as mirroring
Port Monitoring not supported on Link Aggregation
The N-to-1 port mirroring allows the user to specify multiple numbers of ports, range of ports as
mirrored source in a single command. However the maximum number of mirror source ports could be
set to 128 for the current release. A user can mirror multiple 10GigE towards 1 port GigE. Of course if
more than 1 GigE of traffic we don't expect one to mirror more that the port can deliver
Aggregate ports are allowed to be mirrored on the physical ports. Mirroring on the logical link
aggregated port ID is not supported.
In mirroring, the packet coming out of mirroring port may be different from the ingress packet, based
on the type of switching. For all types of mirroring, the mirrored packet carries the FFP (Fast Filtering
Processor) modification, mirrored packet may get modified.
To mirror port 1/1 to port 1/4, you can choose the following options:
In-port
Out-port
Bi-directional
Alcatel.Lucent-ESD
Calabasas/CA./USA
Port Mapping
(AKA Private VLAN)
Allows traffic segregation at L2
User ports in the same session cannot talk
to each other
Note: this feature is part of
Residential bridging features
SFLOW
Port Mapping is a security feature that controls peer users from communicating with each other. A Port
Mapping session comprises a session ID and a set of user ports and/or a set of network ports. User
ports within a session cannot communicate with each other and can only communicate via network
ports. In a Port Mapping session with user port set A and network port set B, ports in set A can only
communicate with ports in set B. If set B is empty, ports in set A can communicate with rest of the
ports in the system. A port mapping session can be configured in unidirectional or bidirectional mode.
In the unidirectional mode, the network ports can communicate with each other within the same
session. In the bidirectional mode, the network ports cannot communicate with each other. Network
ports of a unidirectional port mapping session can be shared with other unidirectional sessions, but
cannot be shared with any sessions configured in bidirectional mode. Network Ports of different
sessions can communicate with each other.
Port Mapping Specifications:
Ports Supported: Ethernet (10 Mbps)/Fast Ethernet (100 Mbps)/Gigabit Ethernet (1 Gb/1000 Mbps).
Mapping Sessions: Eight sessions supported per standalone switch and stack.
Port Mapping Defaults:
Mapping Session: Creation: No mapping sessions
Mapping Status configuration: Disabled
Port Mapping Direction: Bi-directional
SCP command can be used to get/put the file from/to the server.
The scp CLI command is available for copying files in a secure manner between hosts on the network.
The scp utility performs encrypted data transfers using the Secure Shell (SSH) protocol. In addition,
scp uses available SSH authentication and security features, such as prompting for a password if one is
required. Since OS6400/OS6800/OS6850 does not have any SCP-daemon running on the switch,
therefore this feature only works when OS6400/OS6800/OS6850 works as a client instead of the
server. This feature has been validated with SSH 4.0 on Solaris and Linux platforms. Since SSH 4.0
contains SCP, SFTP and SSH features, therefore the system allows the network administrator to create
the local user database to specify all domain or family of features (i.e. the family of feature that a user
can have access). When a user is being created, all allowed access need to be defined.
SFlow is a network monitoring technology that gives visibility to the activity of the network, by
providing network usage information. It provides the data required to effectively control and manage
the network usage. SFlow is a sampling technology that meets the requirements for a network traffic
monitoring solution.
SFlow is a sampling technology embedded within switches/routers defined in RFC 3176. It provides
the ability to monitor the traffic flows. It requires an sFlow Agent running in the Switch/Router and a
sFlow collector which receives and analyses the monitored data.
SFlow agent running on the OS6400, combines interface counters and traffic flow (packet) samples on
all the configured interfaces into sFlow Datagrams that are sent across the network to an sFlow
collector (3rd Party software). Packet sampling is done in hardware and is non-CPU intensive.
Current release (6.1.3r01) will not support IPv6 as Collector.
The switch sends the first 128 bytes of the sampled packet from which the entire layer 2/3/4
information can be extracted by the receiver. This could include:
- Source/Destination Mac address
- Source IP/ Destination IP
- Source/Destination TCP/UDP/ICMP port
- Source/Destination Physical port (Gigabit Port)
- IPv4/IPv6
- RIP (OK, but if this info. falls within the first 128Bytes of the packet)
- VLAN
- QoS 802.1Q, ToS and DiffServ (DSCP)
- Data Payload (OK, but if this information falls within the first 128 Bytes of the packet)
- Others (If this information falls within the first 128 Bytes of the packet)
Given an IP Address the SFLOW sampling information can be sent to a Collector such as the InMon
and/or the Crannog.
Alcatel.Lucent-ESD
Calabasas/CA./USA
TACACS+
Since the CPU of switch is involved in the datagram processing, there is a built in back-off algorithm
which will automatically adjust the sampling rate in the case of CPU congestion on switch.
This back-off mechanism is not user-configurable in Release 6.1.3r01. If CPU is congested it
automatically continues to double the sampling rate, and will continue to do so up to a very low rate of
1 sample in 2147483647 (2exp31)-1. For a 1Gig interface, the bit rate is 1,000,000,000 bits per second.
The back-off algorithm is designed to take effect when the sample rate exceeds 10 samples per second
on any interface. Since each sample is configured by default for 128bytes this is 10x128x8 or 10
samples/sec x 1024 bits/sample or 10x1024 bps
1Gbps / 10x1024 bps = 97656 sampling rate.
Sampling with all available slot/ports at 10G wire-rates on OS9000 and all ports at 1G on the OS6850
keep backing-off up to 2,147,483,647 and stay fixed at this value until the traffic generation is halted
or reduced. That is even running only one 1G interface at wire rate on the OS6850 will back-off to
2147483647 and stay at this (maximum, safe) sampling rate.
Recommended sampling rates for various speeds at various load:
Link Speed
Sampling Rates
Medium
Heavy
Light Load Load
Load
10Mb/s
256
512
8192*
100Mb/s
512
1024
65536*
1Gb/s
1024
2048
Max*
10Gb/s
2048
4096
Max*
*8192 is the empirical value found in the lab for 10Mbs, 65536 for 100 Mbps
*Max: because the OS6850 always backs-off to a max sampling rate of 2147483647 for wire rate at
these rates. All other values are those recommended by Inmon. Whatever the configured sampling rate,
the back-off mechanism will set the meanskipcount higher or lower depending on what is the
unaffecting sampling rate for the CPU.
Release 6.3.3.R01 is the first release to support TACACS+ AAA.
AOS implementation is based on the Tacacs+ Protocol: draft-grant-tacacs-02.txt, January 1997.
Overview:
ASA or Authenticated Switch Access to AOS OmniSwitch running 6.1.3.R01 can be configured to add
servers and forward AAA requests to TACACS+. TACACS+ servers are configured similar to
RADIUS or LDAP servers; however, (MD5) encryption key is optional.
AAA authentication and accounting services must be configured to point to the desired TACACS+
server. It is possible to set authentication and authorization to one TACACS+ server and accounting
requests to a different server.
The number of configurable servers and fail over to second server is uniform across all AAA server
types: Up to 4 servers can be configured and all queries will be sent to the 1st server only. If 1st server
is online and user exists on 2nd server, the result will be failed authentication. If the 1st server is down,
authentication and authorization requests will only be sent to next available server. If all servers are
down, all logins will fail.
Different AAA services can be configured to query different authentication servers. All services may
use a common authentication protocol or mix of supported protocols: Telnet service may be configured
to query RADIUS while http/ftp may be configured to query TACACS+. Or all may query RADIUS.
Or all may query TACACS+. In all cases accounting server protocol must match
authentication/authorization server protocol.
AOS TACACS+ does not support authentication for network or windows domain access. Only AOS
switch access with Partition Management type domain family attribute/value pairs is supported.
This to say different users or groups of users may be assigned various levels of AOS switch
management privileges.
The TACACS+ servers run as an external server on Unix or Windows. We have tested with CISCO
TACACS+ freeware for Unix and Ciscos Secure ACSv4.0
TACACS+ uses TCP instead of UDP. Each login and supported command is queried back to the server
for authorization.
TACACS+ configuration is fully supported with AOS WebView.
Notes:
Tacacs+ supports Authenticated Switch Access and cannot be used for user authentication.
Authentication and Authorization operations are combined together and cannot be performed
independently. This implies that when Tacacs+ authentication is enabled, Tacacs+ authorization is also
enabled. Disabling Tacacs+ authentication automatically disables authorization.
A maximum of 50 simultaneous Tacacs+ sessions can be supported, when no other authentication
mechanism is activated. This is a limit enforced by the AAA application.
Alcatel.Lucent-ESD
Calabasas/CA./USA
In IEEE 802.3af standard, POE transmits power over the same pair as the data.
This method is called the resistive detection method.
In non-802.3af or pre-802.3af standard, POE transmits power over a spare pair (not the
same pair as the data). This method is called the capacitor detection method.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Source Learning
Source Learning
Hardware Learning
Transparent bridging relies on a process referred to as source learning to handle traffic flow. Network
devices communicate by sending and receiving data packets that each contains a source MAC address
and a destination MAC address. When packets are received on switch network interface (NI) module
ports, source learning examines each packet and compares the source MAC address to entries in a
MAC address database table. If the table does not contain an entry for the source address, then a new
record is created associating the address with the port it was learned on. If an entry for the source
address already exists in the table, a new one is not created.
Packets are also filtered to determine if the source and destination address are on the same LAN
segment. If the destination address is not found in the MAC address table, then the packet is forwarded
to all other switches that are connected to the same LAN. If the MAC address table does contain a
matching entry for the destination address, then there is no need to forward the packet to the rest of the
network. Source learning builds and maintains the MAC address table on each switch. New MAC
address table entries are created in one of two ways: they are dynamically learned or statically
assigned. Dynamically learned MAC addresses are those that are obtained by the switch when source
learning examines data packets and records the source address and the port and VLAN it was learned
on. Static MAC addresses are user-defined addresses that are statically assigned to a port and VLAN.
Accessing MAC Address Table entries is useful for managing traffic flow and troubleshooting network
device connectivity problems. For example, if a workstation connected to the switch is unable to
communicate with another workstation connected to the same switch, the MAC address table might
show that one of these devices was learned on a port that belonged to a different VLAN or the source
MAC address of one of the devices may not appear at all in the address table.
The ASIC is capable of Hardware Learning where the unknown source address of a packet could be
learned by the ASIC without software intervention. The advantage of Hardware Learning is to
eliminate excessive flooding problem due to the slow learning rate of Software Learning.
Default Chassis source learning mode is Hardware Learning.
Default Chassis source learning mode is Hardware Learning. New CLI commands are available to
allow user a choice of switching back to Software Learning mode. Mode will also change when the
user configures to be mobile, authentication, and/or LPS port.
2674 - Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering and
Virtual LAN Extensions
802.1Q - Virtual Bridged Local Area Networks
802.1D - Media Access Control Bridges
Source learning builds and maintains the MAC address table on each switch. New MAC address table
entries are created in one of two ways: they are dynamically learned or statically assigned.
Dynamically learned MAC addresses are those that are obtained by the switch when source learning
examines data packets and records the source address and the port and VLAN it was learned on. Static
MAC addresses are user-defined addresses that are statically assigned to a port and VLAN.
In addition, Source Learning also tracks MAC address age and removes addresses from the MAC
address table that have aged beyond the configurable aging timer value.
Accessing MAC Address Table entries is useful for managing traffic flow and troubleshooting network
device connectivity problems. For example, if a workstation connected to the switch is unable to
communicate with another workstation connected to the same switch, the MAC address table might
show that one of these devices was learned on a port that belonged to a different VLAN or the source
MAC address of one of the devices may not appear at all in the address table.
There are two types of source learning modes currently available: software and hardware. The software
mode performs all source learning using switch software. The hardware mode takes advantage of
hardware resources that are now available to perform source learning tasks. At the present time, it is
possible to select the mode that is active for the chassis and/or a given set of ports.
By default, hardware source learning mode is active for the switch. The exception to this is that
hardware source learning is not supported on mobile or Learned Port Security (LPS) ports. As a result,
only software source learning is performed on these types of ports.
16K
8K
Alcatel.Lucent-ESD
Calabasas/CA./USA
Static MAC addresses are configured using the Mac-address-table command. These addresses direct
network traffic to a specific port and VLAN. They are particularly useful when dealing with silent
network devices. These types of devices do not send packets, so their source MAC address is never
learned and recorded in the MAC address table. Assigning a MAC address to the silent devices port
creates a record in the MAC address table and ensures that packets destined for the silent device are
forwarded out that port.
When defining a static MAC address for a particular slot/port and VLAN, consider the following:
The specified slot/port must already belong to the specified VLAN. Use the vlan port
default command to assign a port to a VLAN before you configure the static MAC address.
Only traffic from other ports associated with the same VLAN is directed to the static MAC
address slot/port.
Static MAC addresses are permanent addresses. This means that a static MAC address
remains in use even if the MAC ages out or the switch is rebooted.
There are two types of static MAC address behavior supported: bridging (default) or
filtering. Enter filtering to set up a denial of service to block potential hostile attacks.
Traffic sent to or from a filtered
MAC addr. is dropped. Enter bridging for regular traffic flow to or from the MAC addr.
If a packet received on a port associated with the same VLAN contains a source address
that matches a static MAC address, the packet is discarded. The same source address on
different ports within the same VLAN is not supported.
If a static MAC address is configured on a port link that is down or disabled, an asterisk
appears to the right of the MAC address in the show Mac-address-table command display.
The asterisk indicates that this is an invalid MAC address. When the port link comes up,
however, the MAC address is then considered valid and the asterisk no longer appears next
to the address in the display.
Source learning also tracks MAC address age and removes addresses from the MAC address table that
have aged beyond the aging timer value. When a device stops sending packets, source learning keeps
track of how much time has passed since the last packet was received on the devices switch port.
When this amount of time exceeds the aging time value, the MAC is aged out of the MAC address
table. Source learning always starts tracking MAC address age from the time since the last packet was
received. By default, the aging time is set to 300 seconds (5 min) and is configured on a global basis.
Note. The MAC address table aging time is also used as the timeout value for the Address Resolution
Protocol (ARP) table. This timeout value determines how long the switch retains dynamically learned
ARP table entries.
There are two types of source learning modes currently available: software and hardware. The software
mode performs all source learning using switch software. The hardware mode takes advantage of
hardware resources that are now available to perform source-learning tasks. At the present time, it is
possible to select which mode is active for the chassis and/or a given set of ports.
By default, hardware source learning mode is active for the switch. The exception to this is that
hardware source learning is not supported on mobile or Learned Port Security (LPS) ports. As a result,
only software source learning is performed on these types of ports.
Using static multicast MAC addresses allows you to send traffic intended for a single destination
multicast MAC address to selected switch ports within a given VLAN. To specify which ports will
receive the multicast traffic, a static multicast address is assigned to each selected port for a given
VLAN. The ports associated with the multicast address are then identified as egress ports. When traffic
received on ports within the same VLAN is destined for the multicast address, the traffic is forwarded
only on the egress ports that are associated with the multicast address.
When defining a static multicast MAC address for a particular port and VLAN, consider the following:
A MAC address is considered a multicast MAC address if the least significant bit of the most
significant octet of the address is enabled. For example, MAC addresses with a prefix of 01, 03, 05, 13,
etc., are multicast MAC addresses.
If a multicast prefix value is not present, then the address is treated as a regular MAC address and not
allowed when using the Mac-address-table static-multicast command.
Multicast addresses within the following ranges are not supported:
01:00:5E:00:00:00 to 01:00:5E:7F:FF:FF & 01:80:C2:XX.XX.XX & 33:33:XX:XX:XX:XX
Configuring static multicast addresses is only supported on non-mobile ports.
In addition to configuring the same static multicast address for multiple ports within a given VLAN,
it is also possible to use the same multicast address across multiple VLANs.
The specified port or link aggregate ID must already belong to the specified VLAN. Use the vlan port
default command to assign a port or link aggregate to a VLAN before you configure the static
multicast address.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Software
Third Party Licenses and Notices
The licenses and notices related only to such third party software are set forth below:
Linux
University of California
Carnegie-Mellon University
Random.c
Apptitude, Inc.
Agranat
Operating Systems
Wind Rivers VxWorks multi-tasking O/S version 5.4 with a Kernel version 2.5. Alcatel-Lucent O/S AOS (Alcatel-Lucents Operating Systems).
O/S: AOS (Alcatel-Lucent Operating Systems) based common to OS9000, OS8800, OS7000, OS6800 and OS6400
The AOS is uploaded onto the Flash memory. The advantage of this switch running the AOS is that it is managed using the same interface as with the rest of the
Alcatel-Lucent AOS switching & routing platforms. The AOS on the OS6400 platforms provides support for the majority of the features of the larger modular
platforms including layer-3 unicast routing using RIPv1&v2. Group mobility and authenticated VLANs as well as QoS and ACL functionality are supported
making the OS6400 a highly functional solution for the edge & core (SMB) of the network.
The O/S supports the ability to detect operating system or other software errors, and report them to an EMS, independently of CPU hardware failures.
The operating system is set to detect software exceptions, software trouble reports, and monitor registered software tasks. Depending on the severity of the
problem detected the system may reboot; otherwise it just reports the problem and takes corrective action as necessary. In either case, it does communicate the
problem, to the NMS in the form of an SNMP trap.
Software
Each OmniSwitch 6400 Chassis is shipped with base software.
All advanced features (with the exception of Advanced Routing Software) are also included in the base software.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Value
High Availability
Embedded Security
Distributed Intelligence
Simplified Manageability
Alcatel-Lucents fixed & stackable configuration switches are part of the larger Alcatel-Lucent LAN enterprise switching & routing portfolio.
Together, this portfolio offers a complete core solution with high availability, intelligent performance, and enhanced security in an easy to manage,
flexible and scalable package.
V
V
Vaaallluuueee
Alcatel-Lucents enterprise networking mission is to provide its customers with the industry's best value in highly available, secure and easy-to-manage network
solutions. The industrys best value means having leading features for availability, security and manageability and simultaneously reducing the total cost of
network ownership. In short, the best network at the best total cost.
With up to 384Gbps FD switching capacity, the OS6400 can be a very cost-effective distribution layer, server aggregation, or core switch. The OS6400 value
offers the enterprise the opportunity to invest in the future at prices they can afford today.
Key Customers: specific names of key customers will be provided upon a successful bid and/or NDA.
Alcatel-Lucent provides communications solutions to telecommunication carriers, Internet service providers and enterprises for delivery of voice, data and video
applications to their customers or to their employees. Alcatel-Lucent leverages its leading position in fixed and mobile broadband networks, applications and
services to bring value to its customers in the framework of a broadband world.
As the largest supplier of telecommunications equipment to carriers in the world, Alcatel-Lucent possesses vast experience in providing carrier class Internet
routing and fiber optic solutions, including SONET multiplexing, IP and ATM switching, and wave division multiplexing equipment. For example, our 7750
routing platform is extensively used by carriers and by municipalities as a high-end routing platform with integral MPLS and VPN services. Similarly, we
provide a significant portion of the electronics that ties together both the terrestrial and the undersea fiber optic infrastructure throughout the world. With sales of
EURO 12.5 billion in 2003, Alcatel-Lucent operates in more than 130 countries.
For more information, visit Alcatel-Lucent on the Internet: http://www.Alcatel-Lucent.com
About Alcatel-Lucent Enterprise Networking Solutions
Alcatel-Lucent delivers standards-based IP communications solutions to a global customer base of over 500,000 small, medium and large enterprises,
government agencies, healthcare facilities, and educational institutions. Alcatel-Lucent's award-winning Omni family of IP Communications solutions consists
of an extensive portfolio of network switching infrastructure products and IP telephony products built to provide long-term value.
Key Partners: A longer list of Alcatel-Lucents Partners with specific Marketing relationships will be provided upon a successful bid and/or NDA.
Alcatel-Lucent has created a partnering program that enables it to work with a limited set of vendors in order to provide solutions that fall outside of its core
competencies. Partnerships provide channels and customers a catalog of product solutions that are easy to find, evaluate, buy, install, and operate. Some of the
security partnerships Alcatel-Lucent has established include:
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
IEEE
Ethernet OAM IEEE Standards Supported:
IEEE 802.1ad/D6.0 (VLAN Stacking)
IEEE 802.1ag
IEEE 802.1D-1998
IEEE 802.1D for the GVRP support
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1QinQ
IEEE 802.1s
IEEE 802.1x
Extended 802.1x
IEEE 802.1x MIB Port Access
IEEE 802.1w
IEEE 802.3
IEEE 802.3i
IEEE 802.3ab
IEEE 802.3ac
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3x
IEEE 802.3u
IEEE 802.3z
Alcatel.Lucent-ESD
Calabasas/CA./USA
IETF -- RFCs
RFC 768
RFC 791 / 894 / 1024 /1349
RFC 792
RFC 793 / 1156
RFC 826 / 903
RFC 854 / RFC 855
RFC 855
RFC 894
RFC 896
RFC 903
RFC 919 / 922
RFC 922
RFC 925 / 1027
RFC 950
RFC 951
RFC 959 / 2640
RFC 1027
RFC 1058
RFC 1024
RFC 1112
RFC 1122
RFC 1151
RFC 1155 / 2578-2580
RFC 1156
RFC 1157 / 2271
RFC 1191
RFC 1212 / 2737
RFC 1213 / 2011-2013
RFC 1215
RFC 1256
RFC 1305 / 2030
RFC 1321
RFC 1349
RFC 1493
RFC 1518 / 1519
RFC 1541 / 1542 / 2131 / 3396 / 3442
RFC 1542
RFC 1573 / RFC 2233 / RFC 2863
RFC 1643 / RFC 2665
RFC 1722 / 1723 / 2453 / 1724
RFC 1724 (which obsoletes RFC 1389)
RFC 1757 (formerly 1271) / 2819
UDP
IP & IP / Ethernet
ICMP
TCP / IP & MIB
ARP & Reverse ARP
Telnet & Telnet options
Telnet & Telnet options
IP & IP / Ethernet
Congestion Control
ARP & Reverse ARP
Broadcasting Internet Datagram
Broadcasting Internet Datagram
Multi-LAN ARP / Proxy ARP; Statically configured ARP entries
Subnetting
Bootstrap Protocol (BootP)
FTP
Multi-LAN ARP / Proxy ARP; Statically configured ARP entries
RIPv1
IP & IP / Ethernet
IGMPv1
Internet Hosts
RDP
SMIv1 & SMIv2
TCP / IP & MIB
SNMPv1
Path MTU Discovery
MIB & MIB-II
SNMPv2 MIB
Convention for SNMP Traps
ICMP Router Discovery Messages
NTPv3 & Simple NTP
MD5
IP & IP / Ethernet
Bridge MIB
CIDR
Dynamic Host Configuration Protocol (DHCP)
Clarifications and Extensions for the Bootstrap Protocol
Private Interface MIB
Ethernet MIB
RIPv2 Protocol Applicability Statement & MIB
RIPv2 MIB Extension
RMON & MIB
Alcatel.Lucent-ESD
Calabasas/CA./USA
RFC 2228
RFC 2233
RFC 2236 / 2933
RFC 2271
RFC 2284
RFC 2292 / 2373 / 2374 / 2460 / 2462
RFC 2365
RFC 2452 / RFC 2454
RFC 2453
RFC 2461
RFC 2463 / 2466
RFC 2464 / 2553 / 2893 / 3493 / 3513
RFC 2620
RFC 2640
RFC 2644
RFC 2665
RFC 2667
RFC 2668 / RFC 3636
RFC 2674
Alcatel.Lucent-ESD
Calabasas/CA./USA
RFC 2737
RFC 2784
RFC 2787
RFC 2819
RFC 2863
RFC 2865
RFC 2866
RFC 2867
RFC 2868
RFC 2869/2869bits
RFC 2882
RFC 2893
RFC 2933
RFC 3046
RFC 3056
RFC 3060
RFC 3168
RFC 3176
RFC 3246
RFC 3376 (IGMPv3)
RFC 3396
RFC 3411
RFC 3412
RFC 3413
RFC 3414
RFC 3415
RFC 3416, RFC 3417, and RFC 3418
RFC 3442
RFC 3542 / RFC 3587
RFC 3575
RFC 3635
RFC 3636
Alcatel.Lucent-ESD
Calabasas/CA./USA
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC standards.
Note: EN = European Norm, IEC = International Electro-technical Commission
All hardware-switching platforms comply with Class A standards for digital devices per AS/NZS 3548, CISPR 22, EN55022,
the FCC Part 15, ICES-003, and VCCI standards. Modules with copper connectors meet Class A requirements using
unshielded (UTP) cables, but meet Class B requirements using shielded (STP) cables.
US UL 60950
IEC 60950-1:2001; all national deviations
EN 60950-1: 2001; all deviations
CAN/CSA-C22.2 No. 60950-1-03
NOM-019 SCFI, Mexico
AS/NZ TS-001 and 60950:2000, Australia
UL-AR, Argentina
UL-GS Mark, Germany
EN 60825-1 Laser, EN60825-2 Laser
CDRH Laser
China CCC
EMC Standards
FCC CRF Title 47 Subpart B (Class A limits. Note: Class A with UTP cables)
VCCI (Class A limits. Note: Class A with UTP cables)
AS/NZS 3548 (Class A limits. Note: Class A with UTP cables)
CE marking for European countries (Class A Note: Class A with UTP cables)
EN 55022: 1995 (Emission Standard)
EN 61000-3-3: 1995
EN 61000-3-2: 2000
EN 55024: 1998 (Immunity Standards)
EN 61000-4-2: 1995+A1: 1998
EN 61000-4-3: 1996+A1: 1998
EN 61000-4-4: 1995
EN 61000-4-5: 1995
EN 61000-4-6: 1996
EN 61000-4-8: 1994
EN 61000-4-11: 1994
IEEE802.3: Hi-Pot Test (2250 VDC on all Ethernet ports)
Alcatel.Lucent-ESD
Calabasas/CA./USA
Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to
correct the interference at the owners expense.
The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer could
void the users authority to operate this equipment. It is suggested that the user use only shielded and grounded cables to
ensure compliance with FCC Rules.
If this equipment does cause interference to radio or television reception, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the equipment with respect to the receiver.
Move the equipment away from the receiver.
Plug the equipment into a different outlet so that equipment and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.
Alcatel.Lucent-ESD
Calabasas/CA./USA
JATE
This equipment meets the requirements of the Japan Approvals Institute of Telecommunications Equipment (JATE).
VCCI
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information
Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When
such trouble occurs, the user may be required to take corrective actions.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Installation Warning
Only personnel knowledgeable in basic electrical and mechanical procedures should install or maintain this equipment.
Alcatel.Lucent-ESD
Calabasas/CA./USA
Alcatel.Lucent-ESD
Calabasas/CA./USA
Appendix A: Pin-Outs
10/100Mbps Ethernet Port RJ-45 Pinouts (Non-PoE)
Pin Number
1
2
3
4
5
6
7
8
Description
RX+
RXTX+
Not used
Not used
TXNot used
Not used
Description
BI_DB+
BI_DBBI_DA+
BI_DD+
BI_DDBI_DABI_DC+
BI_DC-
Description
RX+ (-VDC)
RX- (-VDC)
TX+ (+VDC)
N/C
N/C
TX- (+VDC)
N/C
N/C
Alcatel.Lucent-ESD
Calabasas/CA./USA
9600
None
8
1
None
Alcatel.Lucent-ESD
Calabasas/CA./USA