Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Product Summary
Hong Kong
Company Profile
Don Construction Products
Don Construction Products (DCP) has accumulated over 80 years of experience in developing,
manufacturing and marketing innovative construction materials. DCP has operations in Europe,
Africa, Middle East and Asia with 14 manufacturing locations and a distribution network to over 25
countries.
DCP Timeline
1927
1928
1986
1997
2000
2005
2010
DCP Commitments
Expertise
DCP provides exceptional level of expertise and support services both at the office and on site.
Quality
All products are produced to comply with the best relevant international standards.
Full Range
DCP offers a comprehensive range of products covering a wide range of civil and aesthetic
requirements of construction projects.
Expertise Provided
Company Profile
Quality Assurance
Fully equipped R&D laboratories covering diverse climatic and application conditions.
Continuous R&D activities ensuring a leading market position and full product range.
Strong commitment to introduction of new innovative products to market.
Tuning of products to suit local environment conditions while maintaining the right
product performance.
Enduring product performance evaluation and benchmarking.
Unending upgrading of products through cost engineering and introducing new raw
materials.
Waterproofing
Adhesives
Concrete Repair
Flooring Systems
Protective Coatings
Structural Strengthening
Table of Contents
Concrete Admixtures 4
Surface Treatments 7
Grouts & Anchors 8
Concrete Repair 10
Flooring Systems 13
Protective Coatings 18
Sealants & Joints 21
Waterproofing 23
Adhesives 26
Tile Adhesive & Grouts 28
Building Finishing Products 30
Structural Strengthening 32
Concrete
Admixtures
Indispensable components to modern
concrete production, for enhancing and
modifying vital concrete and cement
characteristics.
Name
Description
Highlighted Uses
Standards
Recommended
Dosage
Trowelite P
Trowelite WP
Integral liquid
waterproofing
admixture for mortars
BS 4887-1
BS EN 934-3
0.3 - 0.6
litres/100 kg
of cement
1.0 - 1.4
litres/20 litre
of water in the
mix
Flocrete P10
Water reducing
admixture
0.2 - 1.1
litres/100 kg
of cement
0.3 - 0.9
litres/100 kg
of cement
Flocrete RP55
Flocrete RP66
Retarding and water
reducing admixture
Flocrete RP305
0.3 - 0.8
litres/100 kg
of cement
0.3 - 0.7
litres/100 kg
of cement
0.3 - 0.7
litres/100 kg
of cement
Flocrete RP320
1.3 HRWR Plasticisers
Flocrete SP124
High performance
water reducer
admixture for HSC
1.0 - 3.0
litres/100 kg
of cement
Flocrete SP33
High range
water reducing
superplasticiser
admixture
0.8 - 2.8
litres/100 kg
of cement
Concrete
Admixtures
Name
Flocrete SP90S
Description
Highlighted Uses
Standards
Recommended
Dosage
0.8 - 2.1
litres/100 kg
of cement
Flocrete SP100
High performance
water reducing
admixture for HSC
Flocrete SP42
High range
workability retention
concrete admixture
Hyperplast PC711
High performance
concrete
admixture based
on polycarboxylic
polymers for concrete
with low water
cement ratio
0.3 - 1.7
litres/100 kg
of cement
Hyperplast ES901
High performance
early strength
concrete
hyperplasticiser
admixture
0.5 - 3.0
litres/100 kg
of cement
Hyperplast PC600
High performance
polycarboxylic
based concrete
superplasticiser for
durable and high
performance concrete
0.5 - 2.5
litres/100 kg
of cement
Flocrete SP95
Flocrete SP40
0.9 - 3.0
litres/100 kg
of cement
1.0 -2.8
litres/100 kg
of cement
0.8 - 2.0
litres/100 kg
of cement
0.8 - 1.75
litres/100 kg
of cement
For HSC:
1.0 - 2.75
litres/100 kg
of cement
1.4 Hyperplasticisers
0.5 - 2.5
litres/100 kg
of cement
Hyperplast PC200
Hyperplast PC260
Hyperplast PC155
High performance
concrete
superplasticising
admixture
0.5 - 3.0
litres/100 kg
of cement
Concrete
Admixtures
Name
Description
Highlighted Uses
Standards
Recommended
Dosage
Cemairin 260
Air entraining
admixture for
concrete
ASTM C260
BS 5075-2
BS EN 934-2
0.05 - 0.3
litres/100 kg
of cement
Flocrete W50
High performance
permeability and
absorption reducing
admixture
Flocrete W52
Flocrete W66
Integral waterproofing
admixture
2.0 litres/100 kg
of cement
7.5 30
litres/m3
depending on the
chloride exposure
conditions
Typical dosage
is between
1% - 2% of
cement content,
depending on
cement content
and outside
temperature
1.0 - 2.3
litres/100 kg
of cement
1.0 - 2.4
litres/100 kg
of cement
Flocrete CN30
Corrosion inhibiting
admixture for
reinforced concrete
containing a
minimum of 30% of
calcium nitrate
1.8 Antifreeze
Flocrete
Antifreeze Plus
Cold weather
water reducing and
antifreeze concrete
admixture that is
chloride free
Flocrete SP5000J
Surface
Treatments
To improve concrete surfaces, aiding in the
curing of concrete or facilitating its release
from formwork.
Name
Description
Highlighted Uses
Standards
Recommended
Coverage Rate
Setseal 22
Setseal 33
Setseal 44
Setseal A
Multipurpose, solvented
resin based concrete curing
compound and hardener
Setseal AW
Multipurpose, non-solvented
resin based concrete curing
compound and hardener
4 - 6 m/litre
Newly cast concrete in areas such as:
-- Runways and roads
-- Roof decks
-- Retaining walls
-- Irrigation canals
-- Concrete floors
-- Columns and underground foundations
Available as clear or white pigmented liquid
4 - 6 m/litre
3 - 5 m/litre
4 - 5 m/litre
5 m/litre
Formcoat S
Formcoat WB
Formcoat WS100
30 - 70 m/litre
35 - 65 m/litre
30 - 70 m/litre
Grouts &
Anchors
Designed to fill gaps in or between
structural elements in addition to installing
anchors.
Name
Description
Highlighted Uses
Standards
Approximate Yield
Flo-Add 1
Flo-Add C
Flo-Add HF
ASTM C109:
Compressive strength
@ 28 days
> 45 MPa
(without sand)
> 50 MPa
(with sand)
Flo-Add 1
227 g
50 kg
227 g
50 kg
Flo-Add C
Duct grouting
Post tensioned cables
Pre-stressed structural elements
Where an expansive and
flowable grout is required
ASTM C109:
Compressive strength
> 25 MPa @ 1 day
> 50 MPa @ 7 days
> 60 MPa @ 28 days
OPC
Sand
50 kg
Flo-Grout 3
Flo-Grout HF1
Flo-Grout HFR
Machine beds
Bridge bearing pads and plinths
Under machinery base plates,
crane rails, stanchion plates, etc.
Anchoring of tie bars, bolts and
stressing cables
Underpinnings
37 litres
23 2
litres
59 litres
Water
Yield
6 kg
100 kg
35 2
litres
68 litres
Flo-Add HF
OPC
Water
Yield
50 kg
15 2
litres
32 litres
520 g
Yield
OPC
Flo-Grout 2
Water
21 2
litres
Grouts &
Anchors
Name
Description
Highlighted Uses
Standards
Approximate Yield
Flo-Grout BP800
14 15 litres/25 kg bag
Flo-Grout CR
13 14 litres/25 kg bag
ASTM C109:
Compressive strength
22 MPa @ 1 day
34 MPa @ 3 days
38 MPa @ 7 days
45 MPa @ 28 days
Ambient working
temperatures:
5 - 35C
10 litres/20 kg pack
Ambient working
temperatures:
10 - 40C
10 litres/20 kg pack
Ambient working
temperatures:
15 - 55C
Ambient working
temperatures:
15 - 35C
Flo-Grout HT
Flo-Grout UW
Flo-Grout EP270
Flo-Grout EP330
Flo-Grout EPCG
Keyfix AE100
Keyfix E
Keygrout
Where:
Dh is hole diameter in mm
Db is bar diameter in mm
H is hole depth in mm
Concrete
Repair
Manufactured to restore and repair damaged
or substandard concrete by providing
structural and non-structural repairs, in
addition to sealing and bonding cracks
through injection.
Name
Description
Highlighted Uses
Approximate Yield
(Coverage)
Cemfair FD
Cemfair PF
Cemfair PF100
Cemfair 2C
Cempatch LS
Cempatch S
18 litres/25 kg bag
For fairfaced concrete repair
As a thin layer render
As a skim coat for pin holes and minor honeycombed
concrete repair
As a pore sealer and leveling mortar
To produce a uniform surface for subsequent paint finish
0.7 litres/kg
19 litres/25 kg bag
For crack filling
For fairfaced concrete repair
As a thin layer render
As a skim coat for pin holes and minor honeycombed
concrete repair
As a pore sealer and leveling mortar
To produce a uniform surface for subsequent paint finish
12 litres/20 kg pack
16 17 litres/25 kg bag
Repair of all types of structural concrete where high
strength and extremely low shrinkage properties are
required
For the repair of vertical and overhead elements
As a repair mortar for all structural elements in buildings,
water retaining structures, industrial plants, bridges, etc.
13.5 - 14 litres/ 25 kg bag
Concrete
Repair
Name
Cempatch MH
Cempatch SA
Cempatch FL
Cempatch FS
Setplug
Description
Highlighted Uses
Approximate Yield
(Coverage)
FL standard:
12.5 litres/25 kg bag
FL 90:
12 litres/25 kg bag
FL100:
11.5 litres/25 kg bag
Quickmast 341
11
Concrete
Repair
Name
Description
Highlighted Uses
Approximate Yield
(Coverage)
9 litres/10 kg pack
Quickmast 201EJ
10 litres/20 kg pack
Quickmast 350MLS
Quickmast ETS
10 litres/20 kg pack
Quickmast 601HL
Quickmast 105
Quickmast 110
Quickmast 120
Flooring
Systems
To enhance and protect new or existing
concrete floors. Ranges include screeds,
underlayments, coatings and toppings to
provide durability, longevity, performance and
decorative finishing.
Name
Description
Highlighted Uses
Standards
Coverage Rate
or Area Density
Emerishake
Heavy industry
Parking areas
Warehouses
Workshops
Service stations
Aircraft hangars
Loading bays
Monoshake
Parking areas
Warehouses
Workshops
Service stations
Aircraft hangars
Monotop
Monorelease
Parking areas
Driveways
Warehouses
Sidewalks
Walkways
Patios
Garden landscaping
Pool decks
3 - 7 kg/m
Normal or medium
duty floors:
3 - 5 kg/m
Heavy duty floors:
5 - 7 kg/m
3 5 kg/m
depending on colour
Cemflow TS300
Trowel applied
cementitious screed
applied 10-15 mm for use
as a leveling mortar and
medium to heavy duty
base underlayment
Cemflow GPU
2.9 m2/25 kg @
5 mm thickness
13
Flooring
Systems
Name
Description
Highlighted Uses
Cemflow Base S
Cemflow Topping S
Standards
Coverage Rate
or Area Density
1.36 m2/25 kg @
10 mm thickness
2.9 m2/25 kg @
5 mm thickness
Monoseal
Sethard S
Parking areas
Driveways
Garages
Warehouses
Industrial floors
Sidewalks
Walkways
Patios
Garden landscaping
Pool decks
Walls and columns
Curing compound and sealer for freshly placed
concrete
Concrete:
8 -12 m/litre
Stamped Concrete:
6 -10 m/litre
Mixed (diluted)
1 part Sethard S with
3 parts clean water:
10 m/litre/coat for
1 coat application
7.5 m/litre/coat for
2 coat application
5 m/litre/coat for
3 coat application
Strongcoat WD
Strongcoat EC10
30 m/5 kg pack/coat
to achieve
65 - 75 micron dry
film thickness
30 m/5 kg pack/coat
to achieve
70 - 80 micron dry
film thickness
Flooring
Systems
Name
Strongcoat EC50
Strongcoat HB
Description
Highlighted Uses
Standards
Coverage Rate or
Area Density
2.9 m/kg/coat
to achieve
150 micron dry
film thickness
Standard coverage:
Strongcoat Primer S:
5 m/kg
Strongcoat HB
(base coat):
0.30 kg/m
Strongcoat HB
(top coat):
0.30 kg/m
Refer to Technical Data
Sheet for Antislip coverage
details for:
Approximately 2 mm
thickness, medium texture
(Antislip Aggregate #2)
Approximately 1.25 mm
thickness, fine texture
(Antislip Aggregate #3)
Strongcoat SL1
(0.5 - 1.5 mm)
Strongcoat SL2
(1.5 - 3.5 mm)
EN 13813,
Class SR-B1.5-AR0.5-IR2.9
Strongcoat SL4
(4.0 - 6.0 mm)
Strongcoat Topping
(Above 5 mm)
EN 13813,
Class SR-B2.0-AR0.5-IR4.7
EN 13813,
Class SR-B2.0-AR0.5-IR8.3
EN 13813,
Class SR-B2.0-AR0.5-IR10
Strongcoat Primer S:
5 m/kg @
175 micron dry film
thickness
Strongcoat SL1:
10.6 m/kit @
1 mm thickness
Strongcoat Primer S:
5 m/kg @
175 micron dry film
thickness
Strongcoat SL2:
6.25 m/kit @
2 mm thickness
Strongcoat Primer S:
5 m/kg @
175 micron dry film
thickness
Strongcoat SL4:
3.75 m/kit @
4 mm thickness
Strongcoat Primer S:
5 m/kg @
175 micron dry film
thickness
3 m/kit @
5 mm thickness
15
Flooring
Systems
Name
Strongcoat
Conductive
Strongcoat Primer
Strongcoat Primer S
Description
Flow-applied, 2 mm thick,
epoxy resin conductive
floor with resistance
between 5x10 and 1x106
ohms that comprises of a
primer, conductive base
and a top coat
Highlighted Uses
Standards
Surface resistance:
ASTM F150
5 x 104 to 1 x 10 ohms
Bulk resistance:
DIN 51953
5 x 104 to 1 x 10 ohms
US Federal Specifications
101C Method 4046:
Charge decay 5000v to
zero in less than 0.1 sec
Coverage Rate
or Area Density
Strongcoat Primer:
5 m/kg
Strongcoat Conductive Basecoat:
4.5 m/kg @ 2 mm thickness
Strongcoat Conductive Top Coat:
3.2 kg/m
5 m/kg @
200 micron dry
film thickness
Improves the adhesion of subsequent epoxy
layers to walls & floors
5 m/kg @
175 micron dry
film thickness
Gripdeck AJ System
Gripdeck Primecoat E:
0.25 0.30 kg/m/coat
Wearcoat TG: 0.33 kg/m/coat
Wearcoat Plus: 0.28 kg/m/coat
Antislip Aggregates: 2-3 kg/m
Ramps and turning circles:
Approx. 1.4-1.6 mm thickness
Traffic aisles and parking bays:
Approx. 0.9-1.1 mm thickness
Gripdeck EW
System
Gripdeck Flexcoat
complies with ASTM
C957
Gripdeck Primecoat E:
0.25 0.30 kg/m/coat
Gripdeck Primecoat PU:
0.30 0.40 kg/m/coat
Gripdeck Flexcoat:
0.70 1.00 kg/m/coat
Wearcoat TG:
0.33 kg/m/coat
Wearcoat Plus:
0.28 kg/m/coat
Antislip Aggregates:
2-3 kg/m
Ramps and turning circles:
Approximately 2.4 mm thickness
Traffic aisles and parking bays:
Approximately 1.9 mm thickness
Flooring
Systems
Name
Griptop LDS
(1.0 - 3.0 mm)
Description
Highlighted Uses
Standards
EN 13813,
SR-B2.0-AR 0.5-IR10
BS 476-7,
Class 1 Spread of Flame
Concrete surface
preparation acid
etching liquid solution
incorporating corrosion
inhibitors
DCP Solvent
Griptop MDS
(3.0 - 6.0 mm)
Griptop TF
Coverage Rate
or Area Density
10 m/kit @ 1 mm thickness
EN 13813,
SR-B2.0-AR0.5-IR10
Griptop TF:
2.6 m/kit @ 5 mm thickness
Griptop TF Primer:
4.5 m/kg/coat
Griptop TF Seal:
0.2 - 0.25 kg/m/coat
2 - 3 m/litre/coat
17
Protective
Coatings
Formulated to protect structures as the
first line of defence, for various structural
elements and substrates. To give protection
from weathering, chemical and mechanical
attacks and in some cases providing a
decorative finish.
Name
Description
Highlighted Uses
Recommended Coverage
or Spread Rate
Repcoat
Repcoat S
Repcoat FF
Repcoat primer:
0.2 - 0.4 litres/m
Repcoat:
0.5 litres/m/coat to achieve 250 micron
dry film thickness
Repcoat S Primer:
0.2 litres/m/coat
Excellent protective and decorative fairfaced
coating can be used for many applications
including:
-- Retaining walls
-- Bridge abutments
-- External concrete of storage tanks
-- Multistory buildings and villas
-- Pre-cast elements and concrete cladding
-- Commercial and Industrial complexes
Repcoat S:
0.16 litres/m/coat
Repcoat P
Repcoat P (Coloured):
0.11 - 0.18 litres/m/ coat to achieve
50 100 micron dry film thickness
Repcoat P (Clear):
0.06 - 0.13 litres/m/coat to achieve
30 70 micron dry film thickness
Repcoat P Primer:
0.125 - 0.2 litres/m/coat to achieve
70 90 micron dry film thickness
Protective
Coatings
Name
Description
Highlighted Uses
Recommended Coverage
or Spread Rate
Strongcoat 400
Strongcoat
CR402
Strongcoat
HR130
Strongcoat
EN100
Strongcoat PE1
Strongcoat PE4
Strongcoat
PE350
Chemical plants
Sewage treatment plants
Pharmaceutical industry
Petroleum refineries
Storage areas
Loading docks
Food processing areas
19
Protective
Coatings
Name
Strongcoat
EPU100
Strongcoat EPW
Description
Highlighted Uses
Recommended
Coverage Rate
Repelicone W
Repelicone L
Repelicone
LS300
Sealants &
Joints
Designed to allow for movement in joints,
while protecting structures from chemicals
and weathering elements such as water, wind
and sunlight while preserving the overall
aesthetic design.
Name
Description
Highlighted Uses
Standards
Flexseal GA700
Flexseal GA777
Flexseal AS Series
Flexseal NS Series
Flexseal PU425/440
Flexseal PF850
Flexseal PP800/F
Elastomeric, high
performance, cold applied,
fuel resistant pavement joint
sealant
Flexseal PS660
High performance
polysulphide civil sealant
that forms a flexible rubber
seal that bonds to all
common building materials
Gun Grade:
ASTM C920, Type M, Class 25, Use NT, T, I & M
BS 4254, BS 6920, BS EN ISO 11600 F 25 LM
WRAS approved product: Listing number 9609512
Pouring Grade:
BS 5212 Type FB (includes types N & F)
21
Sealants &
Joints
Name
Description
Highlighted Uses
Standards
Flexseal PS900
BS 4254
US Federal Specification TT-S-00227E
Donseal 777
Elastomeric, high
performance, one
component, hot applied, fuel
and oil resistant pavement
joint sealant
Don Hotrod
Cellrod
Fibreboard
Compressible bitumen
impregnated wood fibre
sheets
BS ISO 7214
DTp Specifications for Highway Works, Dec. 1991, Series
1000, Clause 1015 (pavement joints)
Hydroboard
Waterproofing
A very critical part of any construction
project, affecting durability and the protection
of structures from the access of unwanted
water. A wide comprehensive range of
products to cover all the different needs.
Name
Description
Highlighted Uses
Standard
Recommended
Coverage Rate
Bituproof 40S
Bituproof 50R
Bituproof
300F
Bituproof
320
Retaining walls
Shaded or tiled roofs
Underground concrete foundations
Wet floor areas such as bathrooms and kitchens
Where minor live cracks may occur in concrete
substrates, Bituproof 320 will bridge such minor cracks
Basement walls
Concrete slabs
Suitable for use as curing compound for fresh concrete
As protective coating for normal and galvanized steel
plates
Works as a primer for concrete, masonry surfaces,
before applying waterproofing bituminous membranes
As a protective
coating:
3 - 5 m/litre/coat
As a waterproof
coating:
1 - 1.5 m/litre/coat
Setseal C
Setseal 200C
Setseal B
11 m/20 kg @
1 mm thickness
11.3 m/15 kg @
1 mm thickness
12.5 m/23 kg @
1 mm thickness
23
Waterproofing
Name
Setseal FLX
Setseal FLX
Plus
Setseal R
Description
One component
cementitious crystalline
capillary waterproofing
system for concrete
Highlighted Uses
Standard
Recommended
Coverage Rate
BS 6920
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 12 bars
Negative: > 6 bars
9 m/16 kg @
1 mm thickness
8.5 9 m/15 kg @
1 mm thickness
BS 6920
DIN 1048: Resistance to
water pressure @ 2 mm
Positive: > 8 bars
Negative: > 8 bars
After reaching the full activation
period
17-20 m/25 kg @
1 mm thickness
Sealguard
8.4 Waterstops
Hydrostop AB
Hydrostop
AW
Hyperseal DP
Hyperseal
DP-2010H
10 mm thick, self-supporting
PVC waterstops for
permanent protection
against leakage from cast-inplace concrete joints
Highly precise PVC
waterstops for permanent
protection against leakage
from cast-in-place concrete
joints
BS 2571
BS 2782
U.S. Corps of Engineers
CRD-C 572-74
Available in different
sizes
High performance,
bentonite free, hydrophilic
swellable waterstop that
creates a positive seal
against the face of concrete
joints
Available in different
sizes
High performance,
bentonite free, hydrophilic
swellable waterstop for
protection against sea water
KS M 6518
Expansion volume rate GTE 350%
20 mm x 10 mm
Waterproofing
Name
Hyperseal
DPS-200
Standard
Recommended
Coverage Rate
Description
Highlighted Uses
Enhanced polyurethane
liquid membrane for
waterproong and
protection
ASTM C836
ASTM C836
Available in different
sizes
Available in
3, 4 and 5 mm
thicknesses
Sheets sizes:
1 x 2 m (3.2 and
4 mm).
0.90 x 2 m (6 mm)
Aquathane
R200
Aquathane
R100
Hydroseal FS
Plasti-board
Proto-board
Semi-flexible,
polypropylene based
waterproofing protection
board with high puncture
resistance
Multi-layer bitumen
impregnated thermally
bonded protection board
25
Adhesives
Designed for a variety of applications.
Such as bonding agents for new to old
concrete, primer for different applications
including concrete repair and general
purpose adhesives.
Name
Description
Highlighted Uses
Used as a:
-- Primer for porous substrates and paints
-- Sealer coat
-- Dust proofing
-- General bonding agent
-- Cement based admixture
Areas of application are:
-- Concrete, cement based and gypsum
substrates
-- Dry internal applications
Chloride free
Standards
Recommended
Coverage Rate
Keybond 2000
Cempatch SBR100
Cempatch SBR250
Cempatch SBR400
Cempatch AB
Bonding agent:
6 m when diluted 1:1
Sealer coat:
25 m when diluted 1:4
Admixture:
20 - 25 litre/100 kg of
cement depending on
use
Used as a:
-- Primer for porous substrates
-- Sealer coat
-- Dust proofing
-- General bonding agent
-- Waterproofing enhancer
-- Cement based admixture
Areas of application are:
-- Concrete, cement based and gypsum
substrates
-- PVC & rubber substrates
-- Submerged, external and internal
applications
Special advantages include:
-- Water and water vapour resistance
-- Freeze/thaw stable
-- Chloride free
Dosage is dependent on
required usage
ASTM C1042
ASTM C1059, Type I & II
As a primer:
5 8 m/litre
As a curing aid:
4 6 m/litre
Adhesives
Name
Description
Highlighted Uses
Standards
Recommended
Coverage Rate
Quickmast 108
Quickmast SB
AASHTO T237-73,
Type 2, slant shear, bond
strength and gel time
15 30 ml/stud
Quickmast EP100
BS 6319-2
(compressive):
65 MPa
BS 6319-3 (flexural):
15 MPa
BS 6319-7 (tensile):
8 MPa
Cempatch Primer M
Repcoat ZR
BS 6319-3 (flexural):
6 MPa
BS 6319-7 (tensile):
2.5 MPa
6 m/8 kg bag @
1 mm thickness
6 m/litre/coat to
achieve 50 micron dry
film thickness
27
Name
Description
Highlighted Uses
Standards
Cemfix GP
ANSI A118.1
BS EN 12004, C1T
ISO 13007-1, C1T
For permanent fixing of all types of ceramic, porcelain and other non-porous
tiles on submerged condition such as swimming pools, fountains and potable
water tanks
Highly recommended for bathrooms, kitchens and other wet areas
Excellent for exterior applications
Suitable with underfloor heating systems
Suitable for fixing large format tiles
On concrete and cement based mortar, screed and plaster
On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TES1
ISO 13007-1, C2TES1
Laying large format or heavy tiles and natural stone over concrete and cement
base screed, mortar and plaster substrates
Laying all types of ceramic tiles and stone on all common construction
substrates where slightly movements or deflections are likely
Highly recommended with underfloor heating systems
Superb in fixing tiles in external floors and walls exposed to sever
environmental conditions
Recommended for bathrooms, kitchens and other wet areas
Can be used for tile over tile applications
On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TES2
ISO 13007-1, C2TES2
Laying large format tile and natural stone over concrete and cement base
screed, mortar and plaster substrates
For tile over tile applications
For permanent fixing of all types of ceramic, porcelain and other non-pours
tiles on submerged condition such as swimming pools and fountains
Highly recommended for bathrooms, kitchens and other wet areas
Excellent for external application such as terraces and balconies
Excellent for underfloor heating systems
Non-sag, can be used for vertical walls
On drywall such as gypsum boards and plaster boards
ANSI A118.4
BS EN 12004, C2TE
ISO 13007-1, C2TE
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
Cemfix W
Cemfix Flex
Cemfix 2CS
Cemafill GP
Cemafill Stone
Cemafill M
Description
Highlighted Uses
Standards
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
ANSI A118.6
BS EN 13888, CG2AW
ISO 13007-3, CG2AW
Cemafill W
Cemafill 2CS
Quickmast
EP200WD
Quickmast
EP200
Quickmast
EP500
Commercial centres
Recreation centres
Other high traffic areas
Swimming pools
Kitchens
Applied on both concrete & steel substrates
Swimming pools
Laboratories
Kitchens
Dairy industries
Meet poultry and food processing plants
Hospitals
Abattoirs
Pharmaceutical plants
BS EN 12004, R2T
ISO 13007-1, R2T
ANSI A118.3
BS EN 12004, R2T
ISO 13007-1, R2T
29
Building Finishing
Products
Produced to serve the residential and
commercial construction industry, with
easy to apply, cost effective and attractive
products such as putties, plasters, and
decorative coatings to provide protective and
aesthetic finishing.
Name
Description
Highlighted Uses
Recommended
Coverage Rate
Cemfix BB
15 litres/25 kg bag
Cemfix AAC
5 m2/25 kg bag @
3 mm thickness
Proplast RC100
Proplast
Contact Primer
Proplast CM100
40 m2/ton @
15 mm thickness
Proplast GB1100
Undiluted:
3.0 - 3.5 m2/kg
Diluted:
(2 water:3 primer)
3.5 - 4.0 m2/kg
Building Finishing
Products
Name
Description
Highlighted Uses
Coverage
Thermofix GP
Thermofix PRO
Thermofix Flex
6 m/25 kg bag @
3 mm thickness
As an adhesive:
6 m/25 kg bags @
3 mm thickness
As protective layer:
3.75 m/25 kg bag @
5 mm thickness
Probuild JC100
Probuild PB200/
Exterior
Used internally to fill joints between adjacent gypsum and plaster boards in
conjunction with an appropriate mesh
Used for covering corner beads, fasteners, trims and other small openings
Skim coating for the entire gypsum and plaster panel surface
When applied, it results in a smooth surface that can be easily hand sanded
Available in:
-- Interior grade thin coat plastering of concrete ceilings and block surfaces
-- Exterior grade thin coat plastering of concrete and block surfaces
22 m2/25 kg bag @
1 mm thickness
Primer coat to increase the bonding on smooth concrete substrates for DCP full
range of decorative plasters
Used internally, externally and for vertical and overhead applications
Coverage is dependent
on selected texture
and grade
Proplast
Universal Primer
Proplast Acrylic
Proplast Silicate
Proplast Silicone
31
Structural
Strengthening
Very specialised products and systems
for use in the area in civil engineering that
deals with changing structural elements
loading capacities to accommodate changing
requirements or elements deterioration or
insufficient capacities.
Name
Profibre CP
Description
Highlighted Uses
Heavy duty carbon fibre reinforced polymer plate structural strengthening system
Profibre CW
Heavy duty carbon fibre reinforced polymer wrap structural strengthening system
Profibre GFW
www.dcp-int.com
DOHA, QATAR
BAGHDAD, IRAQ
BASRA, IRAQ
ERBIL, IRAQ
SULAIMANIYAH, IRAQ
T: +964 770 154 6704
E: info.iraq@dcp-int.com
AMMAN, JORDAN
RAMALLAH, PALESTINE
T: +970 2 290 4617
F: +970 2 295 0234
M: + 970 59 967 5600
E: cmrc@palnet.com
AYLA LEBANON
BEIRUT, LEBANON
TRIPOLI, LIBYA