Documentos de Académico
Documentos de Profesional
Documentos de Cultura
IMPLEMENTING
BIM
TECHNIQUES
FOR
ENERGY
ABSTRACT: This paper presents the strengths and weaknesses found during the execution of
the research project of the Higher School of Agricultural Engineering, using BIM technology to
calculating energy efficiency savings. The integration of energy and environmental issues during the
design, construction and remodeling, in order to get adapt to the energy needs that arise through
new techniques or technologies, requires new methodologies that allow us to manage infrastructure
throughout its lifecycle. In recent years, there has been produced incorporating BIM technology for
the realization of a project thus can be life cycle information of this, improving cooperation between
disciplines and reducing duplication of information.
61
62
Part 1
Environmental Security and Sustainability
Laiserin Jerry is recognized as the responsible person for the popularization of the term BIM
from his article (Comparing Pommes and Naranjas), written in 2002 where he defended his
universal decision to identify the applications destined to create building information models
(PIC, 2011). In 2002, Gehry Technologies, created the software Digital Projects, the form
it works is called Integrated Project Models (Integrated project model). Already in 2002
Autodesk purchased the company Revit Technology Corporation, with the aim of entering
the platforms BIM with the Revit software. Building Information Modeling (The model
of building information) (BIM) is a relatively new term, to describe an innovative approach
to building design and construction.
2. ENERGY EFFICIENCY
Energy Efficiency (eE) can be defined as a set of actions that allow to optimize the relation between the quantity of consumed energy and the final products and services obtained. The high consumption of energy in the building sector implies a higher reduction potential, also in view of the
low optimization of resources employed in the design, construction and management found
usually in Spanish construction with relation to energy.
The buildings suppose a high energetic cost and have a significant percentage of total energy
consumption, resulting at the moment in highly polluting factor. The integration of energy
and environmental aspects during all phases of the building lifecycle necessitates the use of
new methodologies that allow us to manage infrastructure in the most efficient form.
We must take into account that buildings are responsible for 40% of carbon dioxide emissions worldwide, percentage repeated in the European Union. The building sector is, therefore, key to reduce these emissions in global scale.
Directive 2002/91/EC of the European Parliament (2002), promotes the reduction of energy demand through the improvement of the energy efficiency of buildings. This directive
has been recast in a new text Directive 2010/31/EC which are updated and emphasize new
aims that have emerged these years. In Spain, the Technical Building Code (TBC, known
by the Spanish acronym CTE) (Royal Decree 314/2006 of 17 March 2006), Regulation of
Thermal Installations and Buildings (RTIB, known by the Spanish acronym RITE) (Royal
Decree 1027/2007 of ) and the Basic Procedure to certify energy efficiency in new-construction buildings (Royal Decree 47/2007 of 19th January), establish the application of minimal
requirements on energy efficiency, in new buildings, or in the existing ones when they are an
object of major renovations. In 2007 the census recorded in Spain a total of 16.28 million
primary residences. About half of them are 30 years old or older (INE, 2001) and more than
half of the buildings are constructed without proper thermal protection
(WWF, 2010). Different organisms and studies conclude that the economic saving due to the thermal improvement of a building ranges between 30% (IDAE, 2008) and 74% (GARCA NAVARRO,
2009), which shows that the improvement in energy efficiency is not only sustainable, but
63
profitable. The improvements to the properties can be classified into three main groups: Improvement in the building envelope, improvement in the air conditioning, and improvement
in the performance of the lighting.
Currently, the law on certification of existing buildings is in phase of approval, changing the
national scene and giving an important step towards the national and European aims for Energy efficiency (eE). The Public Administrative buildings will be the first ones in adapting to
this legislation. This study tries to be an element of approximation for the future obligatory
nature of the energy label qualification certification. Currently, the University of La Laguna
lacks a management methodology that includes the energy efficiency of their facilities, services and resources.
3. CASE STUDY
The objective of this work is to detect the strengths and weaknesses in the use of BIM
technology in the calculation of energy efficiency. In order to do this, we create a building
information model of the Higher Technical School of Agricultural Engineering to meet the
requirements contemplated in The Basic Document HE Energy Savings 2010 (Documento
Bsico Ahorro de Eenrga BDHE) of the Technical Building Code of Spain (see Figure 2).
64
Part 1
Environmental Security and Sustainability
We use the building of the Higher Technical School of Agricultural Engineering of La Laguna (Tenerife). It has four floors, ninety rooms and a total area of approximately 5300m2,
with a U-shaped geometry. We used commercial software Autodesk Revit and created a
library of constructive systems based on the own database Lider materials.
In this paper we want to emphasize the strengths and weaknesses detected making the model
of the Superior Technical School of Agricultural Engineering with BIM technology. The following table details an analysis summarized of the most important items (see Table 1):
Table 1. BIM Technology: Strengths and Weaknesses
Strengths
Promotes the integration of designs in context / environment.
Allows the analysis of different alternatives of the design.
Rectifies errors in real time.
Faster project definition. Better speed in the analysis of the limitation of energy demand.
Increase in productivity as less time is devoted to the project.
Reuse of the information of the different analyses based on the same model. To analyze the structural behavior in real systems, concentration of gases, analysis of shades.
Ease of generating the graphic documentation of the project.
Virtual Simulation allows project assessment and decision making at earlier stages.
Control of the project lifecycle. The elements can be defined as built, reformed, being built or to
be built, which allows us, besides having more accurate and realistic database (DB), to have control
of a project, whether at design stage, the construction phase, total or partial remodeling, or the
management of the completed infrastructure.
Allows the junction between design control/construction and economic factor. Work planning
analysis. We have instant data of the volume and surface of materials to be used, and at the same
time, we can associate to each element other technical characteristics.
Promotes collaborative and multidisciplinary work. The modifications are realized, coordinated and
are reflected in all relations, highlighting the interferences detected in the designed model.
Weaknesses
Interferences between constructional elements. Solving connections between elements to export
the model to other applications (see Figure 3).
Level of complexity of the information model. For calculation applications (for example: energy
efficiency) the model needed can be simpler, with minor detail.
Data Exchange Standards
The need for a plug-in to export the project and use it with other software, for example Exporter
Revit-LIDER.
Implementation of BIM technology. The percentage of professional architects and engineers using
BIM is still low, but is increasing.
In Spain only a very low percentage of university centers offer training in BIM.
65
66
Part 1
Environmental Security and Sustainability
67