Documentos de Académico
Documentos de Profesional
Documentos de Cultura
2. Print a template of the design to allow you to determine where to place the second
hooping of spots. Two sections of the leopard spots will NOT fit together in the Grand
Hoop – use the standard 225 x 140 hoop to embroidery your entire piece of suede.
3. Hoop a piece of stabilizer and lightly spray with temporary adhesive spray.
1
4. Embroider leopard spots over the entire piece, using the template to determine
placement of the two large sections (you can leave the spots off the narrow strip if
desired).
5. After embroidery is complete, remove from hoop and remove all excess stabilizer.
6. Trim thread ends and fuse the second piece of stabilizer to the back of the suede piece.
7. Use a fabric marker to trace outlines of each pattern piece on fabric, including dots for
matching sections.
8. Use satin stitch #10 and strips of black tear-away stabilizer to satin stitch around the
outer edges of all three pieces.
11. Attach snap to front of bag flap and front of bag at marked points.
2
3
4