0 calificaciones0% encontró este documento útil (0 votos)
183 vistas4 páginas
This document contains log output from the startup of a Linux system on a SQN31X0 board. It details the initialization of hardware components like SPI, serial, and Ethernet interfaces. Kernel drivers are loaded and filesystems like squashfs and JFFS2 are mounted. Networking protocols like IPv4, TCP, and wireless are initialized. The system checks configurations files and mounts additional filesystem partitions.
This document contains log output from the startup of a Linux system on a SQN31X0 board. It details the initialization of hardware components like SPI, serial, and Ethernet interfaces. Kernel drivers are loaded and filesystems like squashfs and JFFS2 are mounted. Networking protocols like IPv4, TCP, and wireless are initialized. The system checks configurations files and mounts additional filesystem partitions.
This document contains log output from the startup of a Linux system on a SQN31X0 board. It details the initialization of hardware components like SPI, serial, and Ethernet interfaces. Kernel drivers are loaded and filesystems like squashfs and JFFS2 are mounted. Networking protocols like IPv4, TCP, and wireless are initialized. The system checks configurations files and mounts additional filesystem partitions.
fe. I considered myself a total messed until I met you, my partner and my katalo :D. Happy birthday to the perfect wife who has made me the perfect husband that I am today.I love you.. At ^ cgsn (imei na ikakabit nio ) You have to send it an AT command string and see what comes back. For example: Name of manufacturer - AT+CGMI Model number - AT+CGMM IMEI number - AT+CGSN Software version - AT+CGMR IMSI number - AT+CIMI
Linux version 3.7.6 ([3.3.2/]:yaminggu@lteserver-PowerEdge-R320) (gcc version 4.6
.4 (OpenWrt/Linaro GCC 4.6-2012.12 r74) ) #55 Wed Apr 15 16:33:17 CST 2015 bootconsole [early0] enabled CPU revision is: 00019385 (MIPS 24Kc) SQN31x0 rev 0, CPU:368.640 MHz, AHB:122.880 MHz Determined physical RAM map: memory: 02a00000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Zone ranges: Normal [mem 0x00000000-0x029fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x029fffff] On node 0 totalpages: 10752 free_area_init_node: node 0, pgdat 80440ec0, node_mem_map 81000000 Normal zone: 84 pages used for memmap Normal zone: 0 pages reserved Normal zone: 10668 pages, LIFO batch:1 Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 10668 Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd sqn31x0_sdio.max_ freq=46000000 debug PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) __ex_table already sorted, skipping sort Writing ErrCtl register=00000009 Readback ErrCtl register=00000009 Memory: 37684k/43008k available (3400k kernel code, 5324k reserved, 666k data, 2 20k init, 0k highmem) SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:142 Calibrating delay loop... 244.53 BogoMIPS (lpj=1222656) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 devtmpfs: initialized NET: Registered protocol family 16 MIPS: machine is Generic SQN31X0 board bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (RTIME) (CMODE_PRIORITY) (c) 2001-200 6 Red Hat, Inc. msgmni has been set to 73 io scheduler noop registered (default) sqn-dma: DMA1 is not available sqn-dma: DMA2 is not available sqn-dma initialized DMA0(BA: 0x02492010) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10008400 (irq = 16) is a 16550 console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled sqn31x0_spi sqn31x0_spi.0: master is unqueued, this is deprecated m25p80 spi0.0: m25p80 (32768 Kbytes) sqn31x0_spi sqn31x0_spi.0: sqn31x0_spi controller libphy: sqn31x0_mii: probed sqn31x0_mii sqn31x0_mii.0: sqn31x0_mii bus libphy: PHY 0:00 not found sqn31x0_eth sqn31x0_eth.0: sqn31x0_eth device sqn31x0_icc sqn31x0_icc.0: sqn31x0_icc device sqn31x0_icc sqn31x0_icc.0: sqn31x0_icc: ICC_REGION = 82540000 (98464 bytes) - ph ysical 02540000 sqn31x0_icc sqn31x0_icc.0: sqn31x0_icc: IRQ = 32 sqn31x0_hcd: driver sqn31x0_hcd sqn_rtc sqn_rtc.0: rtc core: registered rtc_sqn as rtc0 sqn-wdt initialized: timeout=5 sec, nowayout=0 nf_conntrack version 0.5.0 (588 buckets, 2352 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Creating 7 MTD partitions on "spi0.0": 0x000000000000-0x0000000c0000 : "Bootrom" 0x0000000c0000-0x000000100000 : "Usim" 0x000000100000-0x000000140000 : "Kvs" 0x000000140000-0x000000180000 : "Unused" 0x000000180000-0x000000c00000 : "kernel" 0x000000c00000-0x000002000000 : "region_fs" 0x000000c00000-0x000001600000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=1230000, len=3D0000 0x000001230000-0x000001600000 : "rootfs_data" sqn_rtc sqn_rtc.0: setting system clock to 2003-10-07 00:00:00 UTC (1065484800)
VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
Freeing unused kernel memory: 220k freed - preinit - regular preinit jffs2: notice: (317) jffs2_build_xattr_subsystem: complete building xattr subsys tem, 1 of xdatum (1 unchecked, 0 orphan) and 9 of xref (0 dead, 0 orphan) found. switching to jffs2 - init init started: BusyBox v1.19.4 (2015-01-20 13:53:24 CST) Please press Enter to activate this console. sysinit: Write 30 Bytes kthp: init procfs handler kthp: Successfully completed init... kthp: new thp interface detected icc0 kthp: Register new network device name=icc0 index=0 count=0 kthp: SQNS Target Host Protocol for 4G devices, version 2.2.001 PPP generic driver version 2.4.2 PPP MPPE Compression module registered gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver NET: Registered protocol family 24 PPTP driver version 0.8.5 xt_time: kernel timezone is -0000 i2c /dev entries driver kthp: open - device index 0 sysinit: Loading defaults sysinit: Loading synflood protection sysinit: Adding custom chains sysinit: Loading zones sqn31x0: operation in full-duplex mode sqn31x0: operation in 100Mb mode sqn12xx: leaving PHY down libphy: 0:01 - Link is Up - 100/Full sysinit: Loading forwardings sysinit: Loading rules sysinit: Loading redirects sysinit: Loading includes sysinit: Optimizing conntrack sysinit: Loading interfaces sysinit: /etc/rc.common: eval: line 1: can't create /proc/net/nf_conntrack: none xistent directory sysinit: /etc/rc.common: eval: line 1: can't create /proc/net/nf_conntrack: none xistent directory sysinit: Loading zmtel port forwading rules sysinit: iptables: Resource temporarily unavailable.
sysinit: Loading Access Restriction Rules
sysinit: Disable System Firewall /etc/config/cwmp checking... /etc/config/daylight checking... /etc/config/ddns checking... /etc/config/dhcp checking... /etc/config/dropbear checking... /etc/config/firewall checking... /etc/config/ftp_upgrade checking... /etc/config/lte_param checking... /etc/config/lte_stat checking... /etc/config/network checking... /etc/config/ntpclient checking... /etc/config/port-mirroring checking... /etc/config/system checking... /etc/config/upnpd checking... /etc/config/url checking... /etc/config/usage.default checking... /etc/config/vpn checking... /etc/config/web-language checking... /etc/config/web_setting checking... /etc/config/zmfw checking... /etc/config/zmfw0 checking... /etc/config/zmfw1 checking... /etc/config/zmfw2 checking... /etc/trconf/tr.xml checking... /www/auth.txt checking... sfp2_init_fs: data planes : sfp2_init_fs: slot 0 : 00020000 size 5439488 sfp2_init_fs: slot 1 : 00550000 size 5439488 sfp2_decode: superblock found, SFP version 2.0 sfp2_decode: generation : 0 sfp2_decode: sector size : 65536 Creating 1 MTD partitions on "spi0.0": 0x000001600000-0x000002000000 : "rootfs_next" sysinit: ****RESET Ethernet PHY****** libphy: 0:01 - Link is Down sqn31x0: operation in full-duplex mode sqn31x0: operation in 100Mb mode sqn12xx: leaving PHY down libphy: 0:01 - Link is Up - 100/Full