Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Easy to use
Economical
Efficient
Operation indicators
Input indicators
Output indicators
Easyy to use
Easy
Peripheral USB port
Output terminals
The optimal cost can be achieved efficiently with NEW CP1E CPU Units.
NS1-type CP1E CPU Units Application Models (Built-in 3 ports : RS-232C, RS-485, USB)
Program
capacity
130
8K
79
CP1E-N30S1-
steps
90
90
90
150
79
79
195
CP1E-N40S1-
CP1E-N60S1-
NS-type CP1E CPU Units Application Models (Built-in 2 ports : RS-232C, USB)
130
CP1E-N30S-
90
90
90
79
150
79
79
195
CP1E-N40S-
CP1E-N60S-
2K
90
steps
86
79
86
79
90
90
90
130
79
150
79
CP1E-E14S-
CP1E-E20S-
CP1E-E30S-
CP1E-E40S-
14
20
30
40
The product photographs and figures that are used in this catalog may vary somewhat from the actual products.
90
79
195
CP1E-E60S-
60
Economical
Exceptional Cost
Responding to Global Competition with More Device
Control Possibilities
The CP1E provide high cost performance to further
reduce costs by allowing you to select the optimal CPU Unit from
the ES-type Basic Models or N/S(1)-type Application Models.
Efficient
Exceptional Cost.
Optimal cost with a selection of
two types of CP1E CPU Units.
Option Battery
Economical
Peripheral
USB port
Built-in RS-232C
communications
status indicator
Built-in RS-232C port
Built-in RS-485
communications
status indicator *1
Built-in RS-485 port
Address Incrementing
from the list for easy input even if you do not remember the
entire mnemonic.
Instruction names
are displayed as
guidance.
curser position.
Easy to use
0.00
100.00
0.00
100.00
0.01
0.01
0.05
100.05
0.06
Commercially
available USB cable
Support
Software
125mm
85mm
79mm
20 mm
slimmer
Normal
NS(1)-type
105mm
5
The CP1E NS(1)-type CPU Units are equipped with high-speed counters, pulse outputs, and a built-in serial port.
These features enable controlling a wide range of devices.
Highspeed
Counters
Built-in RS-232C
PT
Built-in USB
Support Software
Built-in RS-485 *
Pulse
Outputs
Modbus-RTU
Easy
Master
* NS1-type only.
Pulse Outputs*
RS-485
PT
Pulse outputs
RS-232C
Servomotor / Driver
* Models with transistor outputs only.
Inverter
High-speed counter
Rotary encoder
* NS1-type only.
General-purpose motor
High-speed Counters
Control multiple axes with one PLC using the two 100kHz and four 10kHz, single-phase high-speed counters.
PT
High-speed counter
Rotary
encoder
RS-232C
Inverter
Polling Unit
Polling Unit
Polling Unit
Temperature
Sensor Units
Temperature
Sensor Units
CompoBus/S
I/O Link Unit
CompoBus/S Slave
CP1W-SRT21
CP1W-TS002
CP1W-TS101
CP1W-TS102
CPU Unit
N
S1-type
S(1)/E
Option Bat
Battery
USB Port
S-type
Built-in RS-232C
Built-in RS-485
Option Board
High-speed counters:
100 kHz2 inputs and
10 kHz4 inputs
Option Battery
Expansion Unit
Clock
USB Port
S-type
USB port
Expansion Units
Option Battery
Bat
USB port
Built-in RS-232C
Built-in RS-485
Option Board
High-speed counters:
100 kHz2 inputs and
10 kHz4 inputs
Option Battery
Expansion Unit
Expansion Units
Clock
USB Port
Built-in RS-232C
Built-in RS-485
Option Board
Pulse outputs
Option Battery
Billt-in analog
Expansion Unit
Clock
S-type
USB Port
Built-in RS-232C
Built-in RS-485
Option Board
Pulse outputs
Option Battery
Billt-in analog
Expansion Unit
Expansion Units
Clock
CX-One
The following tables lists the Support Software that can be installed from CX-One
CX-One Ver.4.
Ver.9.
No
Yes
CX-Drive
Ver.2.
Yes
Yes
CX-Programmer
Ver.9.
Yes
No
CX-Process Tool
Ver.5.
Yes
No
CX-Integrator
Ver.2.
Yes
Yes
Ver.3.
Yes
No
Ver.1.
Yes
Yes
CX-Designer
Ver.3.
Yes
Yes
CX-Protocol
Ver.1.
Yes
No
NV-Designer
Ver.1.
Yes
Yes
CX-Simulator
Ver.1.
Yes
Yes
CX-Thermo
Ver.4.
Yes
Yes
CX-Position
Ver.2.
Yes
No
CX-ConfiguratorFDT
Ver.1.
Yes
Yes
CX-Motion-NCF
Ver.1.
Yes
No
CX-FLnet
Ver.1.
Yes
No
CX-Motion-MCH
Ver.2.
Yes
No
Network Configurator
Ver.3.
Yes
Yes
CX-Motion
Ver.2.
Yes
No
CX-Server
Ver.4.
Yes
Yes
Note: For details, refer to the CX-One Catalog (Cat. No. R134).
CX-One Ver.4.
Ordering information
International Standards
The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus
(Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
Contact your OMRON representative for further details and applicable conditions for these standards.
Renewal type
NS1-type CP1E CPU Units (Application models) : Built-in 3 ports
Product name
NS1-type
with I/O Points 30
NS1-type
with I/O Points 40
NS1-type
with I/O Points 60
Power Supply
100 to 240 VAC
24VDC
Inputs
Outputs
18
12
24
16
36
24
Specifications
Output type
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Program capacity
8K steps
Model
8K words
Standards
CP1E-N30S1DR-A
CP1E-N30S1DT-D
CP1E-N30S1DT1-D
CP1E-N40S1DR-A
CP1E-N40S1DT-D
CP1E-N40S1DT1-D
CP1E-N60S1DR-A
CP1E-N60S1DT-D
CP1E-N60S1DT1-D
CE
Note: There are no accessories included with NS1-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery(CP1W-BAT01) are not included.
Power Supply
100 to 240 VAC
24VDC
Inputs
Outputs
18
12
24
16
36
24
Specifications
Output type
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Program capacity
8K steps
Model
8K words
Standards
CP1E-N30SDR-A
CP1E-N30SDT-D
CP1E-N30SDT1-D
CP1E-N40SDR-A
CP1E-N40SDT-D
CP1E-N40SDT1-D
CP1E-N60SDR-A
CP1E-N60SDT-D
CP1E-N60SDT1-D
CE
Note: There are no accessories included with NS-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery(CP1W-BAT01) are not included.
Power Supply
Inputs
8
12
18
24
36
Specifications
Output type
Relay
Relay
Relay
Relay
Relay
Outputs
6
8
12
16
24
Program capacity
2K steps
Model
2K words
Standards
CP1E-E14SDR-A
CP1E-E20SDR-A
CP1E-E30SDR-A
CP1E-E40SDR-A
CP1E-E60SDR-A
CE
Note: There are no accessories included with ES-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used.
Battery Set
Product name
Battery Set
Specifications
Model
Standards
CP1W-BAT01
Support Software
Product name
Specifications
Model
FA Integrated
Tool Package
CX-One Lite Ver.4.
CX-One Lite is a subset of the complete CX-One package that provides only the
Support Software required for micro PLC applications.
CX-One Lite runs on the following OS.
OS: Windows XP (Service Pack 3 or higher), Vista or 7
Note: Except for Windows XP 64-bit version.
CX-One Lite Ver. 4. includes Micro PLC Edition CXProgrammer Ver.9..
1 license
CD
CXONE-LT01C-V4
FA Integrated
Tool Package
CX-One Ver.4.
1 license*1
DVD*2
CXONE-AL01D-V4
Standards
Note: 1.CP1E-E60SDR-A CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.42 or higher.
The E20/30/40(S), N20/30/40(S) CPU Units are supported by CX-Programmer version 8.2 or higher.
The E10/14(S), N14/60(S), and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher.
When Micro PLC Edition CX-Programmer is used, you need version 9.03 or higher.
2.When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required. N30/40/60, NA20 only.
3. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
*1. Multi licenses are available for the CX-One (3, 10, 30 or 50 licenses).
*2. The CX-One is also available on CD (CXONE-ALC-V4).
CPU Unit
8K
steps
CP1E-N14D-
CP1E-N20D-
CP1E-N30D-
CP1E-N40D-
CP1E-N60D-
CP1E-NA20D-
2K
steps
CP1E-E10D-
CP1E-E14DR-A
10
N -type
CP1E-E20DR-A
14
CP1E-E30DR-A
CP1E-E40DR-A
30
40
20
Option Battery
USB Port
Option Board
Expansion Units
USB Port
Option Board
Expansion Units
USB port
Built-in RS-232C
Built-in RS-485
Option Board
Option Battery
Expansion Unit
Clock
USB port
Built-in RS-232C
Built-in RS-485
Option Board
Option Battery
Expansion Unit
Clock
USB port
Built-in RS-232C
Built-in RS-485
Option Board
Option Battery
Expansion Unit
Clock
USB port
Built-in RS-232C
Built-in RS-485
Option Board
Option Battery
Expansion Unit
Clock
Billt-in analog
Expansion Units
E-type
USB port
Built-in RS-232C
Built-in RS-485
Option Board
Option Battery
Expansion Unit
Clock
E-type
NA-type
Number of
I/O points
N -type
60
Billt-in analog
Ordering information
International Standards
The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus
(Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
Contact your OMRON representative for further details and applicable conditions for these standards.
Normal type
N/NA-type CP1E CPU Units ( Application models)
Product name
N-type
with 14 I/O Points
Power Supply
Inputs
Outputs
12
18
12
24
16
36
24
12
24VDC
N-type
with 20 I/O Points
N-type
with 30 I/O Points
N-type
with 40 I/O Points
N-type
with 60 I/O Points
24VDC
NA-type with 20 I/O Points
(Billt-in analog)
Specifications
Output type
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Program capacity
8K steps
8K words
8K steps
8K words
8K steps
8K words
8K steps
8K words
8K steps
8K words
8K steps
8K words
Model
Standards
CP1E-N14DR-A
CP1E-N14DT-A
CP1E-N14DT1-A
CP1E-N14DR-D
CP1E-N14DT-D
CP1E-N14DT1-D
CP1E-N20DR-A
CP1E-N20DT-A
CP1E-N20DT1-A
CP1E-N20DR-D
CP1E-N20DT-D
CP1E-N20DT1-D
CP1E-N30DR-A
CP1E-N30DT-A
CP1E-N30DT1-A
CP1E-N30DR-D
CP1E-N30DT-D
CP1E-N30DT1-D
CP1E-N40DR-A
CP1E-N40DT-A
CP1E-N40DT1-A
CP1E-N40DR-D
CP1E-N40DT-D
CP1E-N40DT1-D
CP1E-N60DR-A
CP1E-N60DT-A
CP1E-N60DT1-A
CP1E-N60DR-D
CP1E-N60DT-D
CP1E-N60DT1-D
CP1E-NA20DR-A
CP1E-NA20DT-D
CP1E-NA20DT1-D
UC1,
N, L,
CE
Note: There are no accessories included with N/NA-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery (CP1W-BAT01) are not included.
E-type
with 10 I/O Points
Power Supply
Inputs
Outputs
E-type
E-type
E-type
E-type
with
with
with
with
14
20
30
40
I/O
I/O
I/O
I/O
Points
Points
Points
Points
8
12
18
24
6
8
12
16
Specifications
Output type
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Transistor (sinking)
Transistor (sourcing)
Relay
Relay
Relay
Relay
Program capacity
2K steps
2K words
Model
Standards
CP1E-E10DR-A
CP1E-E10DT-A
CP1E-E10DT1-A
CP1E-E10DR-D
CP1E-E10DT-D
CP1E-E10DT1-D
CP1E-E14DR-A
CP1E-E20DR-A
CP1E-E30DR-A
CP1E-E40DR-A
UC1,
N, L,
CE
Note: There are no accessories included with E-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used.
Battery Set
Product name
Specifications
Battery Set
Model
Standards
CP1W-BAT01
The Options cannot be used for CP1E N14/20, N30/40/60S(1), E10/14/20/30/40/60(S) CPU Units.
Specifications
One RS-232C Option Board can be mounted to the Option Board slot.
One RS-232C connector is included.
For CP1E N30/40/60 or NA20 CPU Units only.
Model
Standards
CP1W-CIF01
CP1W-CIF11
One RS-422A/485 Option Board can be mounted to the Option Board slot.
For CP1E N30/40/60 or NA20 CPU Units only.
UC1,
N, L,
CE
CP1W-CIF12
One Ethernet Option Board can be mounted to the Option Board slot.
CP1E CPU Units are supported by CP1W-CIF41 version 2.0 or higher.
When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required.
For CP1E N30/40/60 or NA20 CPU Units only.
CP1W-CIF41
Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-DAM01), or Memory Card (CP1W-ME05M) with a CP1E CPU Unit.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
11
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT,
WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS
UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND
MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of the
product in the customer's application or use of the product.
Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be
used.
Know and observe all prohibitions of use applicable to this product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY
RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your
OMRON representative at any time to confirm actual specifications of purchased product.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a
warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements.
Actual performance is subject to the OMRON Warranty and Limitations of Liability.
OMRON Corporation
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388