Documentos de Académico
Documentos de Profesional
Documentos de Cultura
2.1 Introduction
EN ISO 3834-2 defines comprehensive quality requirements for fusion welding in w
orkshops
and/or on site. Therefore compliance to the requirements of this part should pro
vide the best
bxclevelxcbxc achievable for the welding fabrication activities.
2.2 Requiremen Requirements review and technical review
The Manufacturer shall review tbxcbxche contractual and any other requirements t
ogether with any
technical data relevant to the welding fabrication activities, in order to verif
y that the work content is
withirer shall review the contractual and any other requirements together with a
ny
technical davxcn purer shall review the contractual and any other requirements t
ogether with any
xcbxdata relevant to the welding fabrication activities, in order to verify that
the work content is
within its cvxcbapability to perform, that sufficient resources are available to
achieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should xcbbe asked t not Requirements review and technical review
The Manufacbxcbxctuta relevant to the welding fabrication activities, in order t
o verify that the work content is
within its capability to perform, that sufficient resources are available to ach
ieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should be asked the purchaser2 to provide all the necessary data.
Moreover the Manufacturer shall identify any variation between the final contrac
t and previous
quotations andbxcb notify the purify the purchaser of any programme, cost or eng
ineering changes that may
result.EN ISO 3834-2 requirements
2.1 Introduction
EN ISO 3834-2 defines comprehensive quality requirements for fusion welding in w
orkshops
and/or on site. Therefore compliance to the requirements of this part should pro
vide the best
quality level achievable for the welding fabrication activities.
2.2chaser of any progran purer shall review the contractual and any other requir
ements together with any
xcbxdata relevant to the welding fabrication activities, in order to verify that
the work content is
within its cvxcbapability to perform, that sufficient resources are available to
achieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should xcbbe asked t not Requirements review and technical review
The Manufacbxcbxctumme, cost or engineering changes that may
result.cumentation is clear and unambiguous. All information necessary to carry
out the
manufacturing operationsbxcbxcb shall be therefore available prior to the commen