Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Preface
It is really our honor to be your supplier. In order to let our customers manage this
system ASAP, we especially compile this operating manual in a all-round and
incisive way. You can get the knowledge of the machine configuration, hardware
connection, equipment structure and the operating instructions etc. We strongly
suggest you to read this manual carefully before you using your printer.
In order to compile the correct and dependable guides, we do our best to avoid the
human error. If you find any error or something not clear enough, please contact us.
In coming future, for enhancing the equipments performance and reliability. The
manual is subject to change without notice.
Any problem or inquiry, please feel free to contact us through the following email
address: support@icontek.com.cn
Thanks a lot for your cooperation!
Introduction
Thank you very much for purchasing the Color Inkjet Printer (simply called the
printer below).
This printer is a color inkjet printer that adopts solvent ink, supports 3.2m media
width, and builts-in USB 2.0 interface.
This manual, the Users Guide, describes the features
of the printer, names of components, information to be known before use, and
basic operations, such as how to turn the power on and off and set media and ink.
The following items should be read before reading Section 1.
-Safety precautions
-Handling precautions
Manual legend (notation rules)
-
Read these items to use the printer safely and properly. Keep this manual in a place
where you can quickly access it at any time.
Safety Precautions
The following symbols are used in this manual to ensure the proper use of the
printer and to prevent the printer from being damaged. Follow the instructions
marked with these symbols.
Failure to follow the guidelines marked with this
symbol could result in serious personal injury or death.
WARNING
Failure to follow the guidelines marked with this symbol could result in minor
personal injury or product and/or peripheral damage.
WARNING
Example of symbols:
symbol denotes items that require special care while executing a certain procedure
or operation.
symbol denotes items that are forbidden.
symbol denotes items you should follow to prevent accidents or injury.
CAUTION
Use the power supply voltage specified on the nameplate. DO NOT plug several
devices into one electrical outlet as this might result in fire or electric shock.
Make sure the printer is well grounded. If not, a short circuit may cause fire or
electrical shock.
DO NOT damage, break, process, or heat the power cable. If it is damaged, replace
it with a new one. Using a damaged power cable may cause fire or electric shock.
NEVER use the printer in a place of extreme humidity or any place where it can
possibly be splashed by any liquids. If any liquids get into the printer, it could lead
to fire, electric shock, or other serious accidents.
DO IN OT remove the covers attached to the printer because they contain highvoltage and extremely hot parts. Careless removal might result in an electric shock
or burn.
DO NOT allow metal or liquids to touch the internal parts of the printer. Doing so
may cause fire, electric shock, or other accidents.
DO NOT disconnect or connect the power cable with wet hands. Doing so may
lead to electric shock. Turn the printer off and unplug the power cable immediately
after it thundered.
T urn the printer off and unplug the power cable immediately
after it thundered
-
CAUTION
Power OFF the printer and unplug the power cable from the power outlet in any of
the following cases:
When putting your hands inside the printer.
Smoke, strange noise or smells generate from the printer.
A piece of metal or any liquid touches the internal parts or slot of the printer.
An error requiring service by a service center occurs.
DO NOT put your hand into the paper delivery slot as it may lead to injury by the
printer.
Only use the power supply according to the label. You may choose either AC 11
OV or 220V for different countries and regions.
Dont use your hand to move print head; otherwise the printer will be damaged.
Always use power switch to turn Onloff the printer. Before shutting down the
Printer, do not pull out Power Supply wire or Data Wire.
Put printer at a horizontal and stable place with enough space; otherwise, the
Printer may not work properly.
The ink used for the device contains organic solvent. Therefore, observe the local
rules strictly related to organic solvent stuff.
The ink used for the device contains organic solvent, Since the ink is flammable,
never use fire when using the device.
Do not swallow ink or avoid its splashes on the eye. If it gets into the eye, wash it
off with a clean running water and consult a doctor as required. If it is swallowed,
do not try to vomit it forcefully, but consult a doctor.
Keep ink s out of reach of children.
I
CAUTION
Handle the paper rolls with care because they are very heavy. If you drop them, it
could lead to personal injury.
Hold the electric cable by the plug when connecting or disconnecting it. Failing to
do so may cause the cable to fray or break which could lead to electric shock
and/or fire.
DO NOT get ink on your skin or clothes. any ink immediately with soapy water.
DO NOT put any paper rolls on an unstable table or a tilted surface as they could
fall leading to an injury.
The heater will be hot. Pay attention not to touch and not to be burned
In order to ensure the safe operation of the printer heed all of the cautions and
warnings contained throughout this manual.
10
Handling Precautions
Power Supply
1. Install the printer near an easily accessible electrical outlet.
2. Do not provide power to the printer through the same power line as for
noise-generating devices, such as a motor.
3. Use the power supply matched with the specification of the printer.
4. Connect the power cable to an electrical outlet. Do not plug several devices
into one electrical outlet.
printer.
1 .Do not place anything on top of the printer. Do not rest your elbows on the
printer.
2. Open and close the top cover gently from the front of the printer
3. Before connecting or disconnecting the interface connector, turn the printer off.
4. Do not clean the surface of the cover with benzene or paint thinner.
11
The coating may come off or deteriorate. Wipe the cover clean with a
soft cloth. If the cover is very dirty, use a cloth moistened with a
neutral detergent.
5. Do not touch the ink-jet head surface.
Normal cleaning should be done each week if the printer is not used for a
long period
12
If left without being cleaned,the ink in the head nozzles with harden and the
head may be damaged
Dont direct the draft from a fan or air conditioner directly onto the machine
A draft may dry the ink in the head nozzles causing clogging that affects ink
jetting and you will not be able to obtanin satisfactory printing results
13
Consumables
1. Always use the recommended consumables (media, ink, etc.). Failure to follow
this instruction may cause poor print quality or a breakdown.
2. Do not use ink past the date of expiration as this may cause a breakdown.
3. Put a used ink into a plastic bag and dispose of it as an industrial waste. Observe
any regulations for disposal of waste ink bottles.
4. Do not get ink on your skin or clothes. Wash off any ink immediately with
soapy water.
14
5. Check waste ink bottle regularly so as not to leak the waste ink.
6. When the waste ink bottle is installed or removed, spread the stain preventing
sheet so as not to stain the floor with spilt ink.
7. Store ink in a dark and cool place. NEVER store ink in a high temperature or
direct sunshining place. Doing so, ink may cause characteristic changes.
Operating Conditions
Installation Space
Environmental Conditions
15
*printer installation
Environmental Conditions
This section describes the operating conditions for the printer.
Installation Space
There must be a sufficient space around the printer for the replacement of frequently used
parts, for the output of drawings, and for ventilation. In addition, the maintenance space,
shown below, is required to repair the printer or replace components. The
installationlmaintenance space is shown in the following figure.
Installation and maintenance space
16
Dont leave Printer at a place where temperature and humidity change severely.
Avoid direct sunlight, strong light or heat.
17
Place printer nearby the wall socket, so that it is easy to connect or disconnect the
power supply
Environmental Conditions
Operating temperature and humidity levels
18
HINT
-
to 25 C.
When the printer is used out of range of the operating temperature and
humidity, the print quality may be degraded.
-
Power Demanding
HINT
-
Printer and computer connect with the ground together avoiding the electric circulating.
-In order to avoid electric network concussion and the voltage frequency wave effect the
computer system working, computer power socket should be setup in front of the printer
19
power socket separately, the distance should be 2 meters. It is better to set up a 220V
1OA noise filter in front of the computer power socket, to remove the power noise.
20
21
Printer installation
Printer is in one unit, easy to installing.
1. Put the printer on supporter with sufficient manpower. Make sure the printer
stable enough.
2. Install auto ink supply system on right side.
Pic 1
Turning on machine
1. In order to clean print head easily, please prepare following items:
Flush solution
22
Non-woven fabric.
2. In order to inspect temperature and humidity of printing
environment, please prepare relative measurers. Requirement for environment:
Temperature: 20C 28C
-
23
V optional)
Feeding power supply: AC 100 / 240V 50/60HZ (AC 100 V
optional)
Cleaning power supply: AC 100 / 240V 50/60HZ (AC 100 V
optional)
Please choose the type of power shown on the printer in case of damage to the printer.
Make sure the printer is well grounded.
It is better to use UPS stable-voltage power.
4. Requirement for computer
In order to avoid problems caused by computer, please choose high quality computer or
brand computer such as DELL or IBM, etc.
Print Interface
Connect the printers USB port with computers USB port directly by data cable.
USB driver procedure finishes automatically when printmon Setup is
installed.
Switch on power
24
1. After all parts are installed, put the printer at the proper place. Removing
carefully all the packaging materials like foam, adhesive
tape.
2. Connect power cables and data cables. Power protective switch can only control
heating power and it is at open status in normal
condition (Its in the open status when far from red point).
3. After everything is ready, switch on power.
4. Load media.
5. Test to check if print head is good to print. If the test result is unsatisfactory, you
should clean print head.
25
26
z:r
27
28
29
30
31
32