Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Sandblast Equipment
Portable or stationary pressure and suction type sandblast machines
ranging from 30 liters to 300 liters in single or double chamber models.
Suitable for all type of abrasive
Range includes Machine spares parts that are interchangeable with most
brand Blast Machines in the market
Special abrasive grit valves for Garnet and Steel grit abrasives.
Bulk Blast Sandblast Units-Stationary or Mobile
Capacity 6-40 tons, 4 6 Nozzles.
Remote control systems for Sandblast Machines
Fully pneumatic and electro-pneumatic (12 /24 V) remote control valve
Deadman handles for fully pneumatic and electro-pneumatic remote
control systems.
Remote control hose and fittings.
Operator Safety Equipment
Blast helmets with inner visor, large viewing area, easily changeable
outer lenses, air pressure control, cape and belt.
Blast suits leather, cotton or leather/cotton
Air Filters for helmet air
Temperature control systems to cool or heat the air
Gloves
Pressure regulators
Inner and outer lens and caps for all major brands of sandblast helmets
Sandblast lights
Sandblast Nozzles
Liners of Tungsten Carbide, Silicon Carbide, Silicon-Nitride, Born-Carbide
or Born-Alloy.
Jackets of Aluminium, rubber or polyurethane
1 or 1 inlet sizes
Long, medium or short venturi length
Length 50mm thread, fine thread or stick-up type
Angle nozzles with 1,2 or 3 outlets
Hypodermic needle gauges for control of the right blasting pressure
Sandblast Hoses, Couplings and Nozzle Holders
All most commonly used sizes of extremely durable sandblast hose
Couplings of Aluminium, cast-iron, brass or nylon
Nozzle holders of Aluminium or light weight nylon with fine or large
thread
Threaded couplings for machine connection
Air Hose
All commonly used sizes and qualities ranging from to 4 ID
Specialized Product
Wet blast injector system The clean blast system to eliminate dust
during blasting.
Abrasive Vacuum systems.
Internal Pipe Blasting Equipment for manual and automatic
Internal Pipe Coating Equipment for manual and automatic
Abrasive Conveyors
Suction Guns
Vacuum blast equipment
Blast Cabinets
Portable blowers for job-site ventilation and dust extraction
Extractor fans
Moisture separators and after-coolers
Blast lights for internal tank operation
High pressure water jetting machines with pressure up to 40,000 PSI
ULTRABLAST
A combination of slurry blast with UHP Boost for high productivity and low
abrasive consumption.
HP & UHP
Tailored supply of electrical or diesel driven systems. Systems also
available in Zone 1 & 2 rating. These systems range from 100 bar up to
3,500 bar with flow rates between 5 lpm to 1,668 lpm. Typical accessories
accompanying these systems are:
Jetting Guns (electronically or mechanically controlled
Rotating nozzles (rotated by air, hydraulics or by HP / UHP water)
Xtreme Mix
1:1 up to 10:1 variable ratio
Hydracat Tailor made to suit paint specification
Reactor 1:1 ratio for Polyurea / Foam /
application
Polyurethane
Accessories
Airless spray guns
Airless pole guns
Gun accessories such as tip guards, inlet filters, swivels, adapters, and
gun extensions.
Reversible tip holders, adjustable paint spray tips, ball tips, cylinder tips
High pressure paint hose, bulk or assembled
Low and medium pressure hose for air and fluid service
Swivel adapters
Hose fittings
Nipples and adapters
Hex reducing nipples
Gauges and air control components
Ball valves
Paint mixers, hand or air operated
TESTING EQUIPMENT
Elcometer range Testing Equipment for blasted and painted surfaces.
BLAST CLEANING ABRASIVES