Está en la página 1de 2

Note on disc

Operating Instructions
Instrucciones de funcionamiento

CD Stereo System
Sistema estreo con reproductor de discos compactos

This system can play CD-R/RW with CD-DA


or MP3 format content.
Before playback, finalize the disc on the
device it was recorded on.
Some CD-R/RW cannot be played because
of the condition of the recording.

Note on USB device


This system does not guarantee connection
with all USB devices.
This system supports USB 2.0 full speed.
This system can support USB devices of up
to 32 GB.
Only FAT 12/16/32 file system is supported.

Note on MP3 file

Model No.

SC-AKX200

Files are defined as tracks and folders are


defined as albums.
Tracks must have the extension .mp3 or
.MP3.
Tracks will not necessarily be played in the
order you recorded them.
Some files can fail to work because of the
sector size.
MP3 file on disc
This system can access up to:
255 albums (including root folder)
999 tracks
20 sessions
Disc must conform to ISO9660 level 1 or 2
(except for extended formats).
MP3 file on USB device
This system can access up to:
800 albums (including root folder)
8000 tracks
999 tracks in one album

Thank you for purchasing this product.


For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.

Customer Service Directory

Muchsimas gracias por haber adquirido este aparato.


Para un desempeo y seguridad ptimos, por favor lea estas instrucciones cuidadosamente.
Guarde este manual para su consulta en el futuro.

Panasonic Corporation
Web Site: http://panasonic.net

LX PN PR PS En

Sp

RQT9969-M
L0115LC0

Panasonic Corporation 2015

Overview of controls / Visin general de los controles

Panama

800-PANA (800-7262)

Colombia

01-8000-94PANA
(01-8000-947262)

Ecuador
Costa Rica
Guatemala

1-801-811-PANA
(1-801-811-7262)

Chile

800-390-602
From a cell phone: 797-5000

Venezuela

800-PANA-800
(800-7262-800)

Uruguay

0-800-PANA (0-800-7262)

Peru

0-800-00-PAN (0-800-00726)

Argentina

0800-333-PANA
(0800-333-7262)
0810-321-PANA
(0810-321-7262)

Paraguay

0800-11-PANA
(0800-11-7262)

Dominican
Republic

809-200-8000

System

SC-AKX200

Main unit

SA-AKX200

Speakers

SB-AKX200

Do the procedures with the remote control.


You can also use the buttons on the main
unit if they are the same.

WARNING!
Unit
To reduce the risk of fire, electric shock or
product damage,
Do not expose this unit to rain, moisture,
dripping or splashing.
Do not place objects filled with liquids,
such as vases, on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
Do not let metal objects fall inside this unit.

CAUTION!

For Central America and the Caribbean

Operation is subject to the following two


conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

Licenses
The Bluetooth word mark and logos are
registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Panasonic Corporation is under
license. Other trademarks and trade names
are those of their respective owners.
Google Play and Android are trademarks of
Google Inc.
MPEG Layer-3 audio coding technology
licensed from Fraunhofer IIS and Thomson.

Maintenance
To clean this system, wipe with a soft, dry
cloth.
Never use alcohol, paint thinner or benzine to
clean this system.
Before using chemically treated cloth, read
the instructions that came with the cloth
carefully.

Unit
To reduce the risk of fire, electric shock or
product damage,
Do not install or place this unit in a
bookcase, built-in cabinet or in another
confined space. Ensure this unit is well
ventilated.
Do not obstruct this units ventilation
openings with newspapers, tablecloths,
curtains, and similar items.
Do not place sources of naked flames,
such as lighted candles, on this unit.
This unit is intended for use in moderate
climates.
This unit may receive radio interference
caused by mobile telephones during use. If
such interference occurs, please increase
separation between this unit and the mobile
telephone.
This unit utilizes a laser. Use of controls or
adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure.
Set the unit up on an even surface away from
direct sunlight, high temperatures, high
humidity, and excessive vibration.
AC power supply cord
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Battery
Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
When disposing of the batteries, please
contact your local authorities or dealer and
ask for the correct method of disposal.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time
with doors and windows closed.
Do not break open or short-circuit the
battery.
Do not charge the alkaline or manganese
battery.
Do not use the battery if the cover has
peeled off.
Remove the battery if you do not use the
remote control for a long period of time.
Keep in a cool, dark area.
Recording and playback of content on this or
any other devices may require permission from
the owner of the copyright or other such rights
of that content. Panasonic has no authority to
and does not grant you that permission and
explicitly disclaims any right, ability or intention
to obtain such permission on your behalf. It is
your responsibility to ensure that your use of
this or any other devices complies with
applicable copyright legislation in your country.
Please refer to that legislation for more
information on the relevant laws and regulations
involved or contact the owner of the rights of
the content you wish to record or playback.

B3 4 Portrait.indd 1

Supplied accessories

A Standby/on switch [`], [1]


Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.

Check and identify the supplied accessories.

1 AC power supply cord


1 AM loop antenna
1 FM indoor antenna

B Select the audio source


On the main unit:
To start Bluetooth pairing, press and hold
[ PAIRING].

C Basic playback control

1 Remote control
1 Remote control battery

About Bluetooth

Panasonic bears no responsibility for data


and/or information that can possibly be
compromised during a wireless transmission.
Frequency band
This system uses the 2.4 GHz frequency
band.
Certification
This system conforms to the frequency
restrictions and has received certification
based on frequency laws. Thus, a wireless
permit is not necessary.
The actions below are punishable by law:
Taking apart or modifying the main unit.
Removing specification indications.
Restrictions of use
Wireless transmission and/or usage with all
Bluetooth equipped devices is not
guaranteed.
All devices must conform to standards set by
Bluetooth SIG, Inc.
Depending on the specifications and settings
of a device, it can fail to connect or some
operations can be different.
This system supports Bluetooth security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data
wirelessly to this system with caution.
This system cannot transmit data to a
Bluetooth device.
Range of use
Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
This system may not function properly and
troubles such as noise and sound jumps may
arise due to radio wave interference if this
unit is located too close to other Bluetooth
devices or the devices that use the 2.4 GHz
band.
This system may not function properly if
radio waves from a nearby broadcasting
station, etc. is too strong.

CAUTION!
Use the speakers only with the
recommended system. If not, you can
cause damage to the amplifier and
speakers and can cause a fire. Consult
an approved service personnel if
damage occurs or if there is a sudden
apparent change in performance.
Do the procedures included in these
instructions when you attach the
speakers.

Making the connections


Connect the AC power supply cord only
after all the other connections have been
made.

3
4

2
To household
AC outlet

1
2
3
4

Connect the AM loop antenna.


Stand the antenna up on its base until it
clicks.

Connect the AC power supply cord.


Do not use an AC power supply cord from
other equipment.
Conserving power
The system consumes a small amount of
power even when it is in standby mode.
Disconnect the power supply if you do not
use the system.
Some settings will be lost after you
disconnect the system. You have to set
them again.

Press [CD x] (main unit:


[x OPEN/CLOSE]) to open the disc tray.
Put in a disc with the label facing up.
Press again to close the disc tray.
Press [USB/CD] to select CD.

USB

J Mute the sound

Decrease the volume and connect the


USB device to the USB port.
Hold the main unit when connecting or
disconnecting the USB device.
Press [USB/CD] to select USB A or
USB B.
USB status indicator lights up in red when
selected.

Note:
Do not use a USB extension cable. The system
cannot recognize USB device connected through a
cable.

K View the play menu

Distance: Within approximately 7 m


Angle: Approximately 20 up and down,
30 left and right

N Select MP3 album or track


Press [ALBUM/TRACK] to select album or
track.
Browse tracks or albums
Turn [MULTI CONTROL] to browse.
To start playback from the selection, press
[4/9].

USB A

USB port (
)
USB status indicator
Play MP3 tracks.

USB B

USB port (
)
USB status indicator
Play MP3 tracks.
Record sound or music tracks.

Q Display panel

Bluetooth

T Select DJ jukebox

You can connect and play an audio device


wirelessly through Bluetooth.
Preparation
Switch on the Bluetooth feature of the
device and put the device near the system.
Read the operating instructions of the device
for details.

Pairing a device
Preparation
If this system is connected to a Bluetooth
device, disconnect it (ZDisconnecting a
device).

1
2
3

R Disc tray
S Recording operation control

Preparing the remote control

Press [ ].
If PAIRING is shown, continue with
step 4.

1
2

Use alkaline or manganese battery.


Install the battery so that the poles (+ and )
align with those in the remote control.

Press [PLAY MENU] to select


DISCONNECT?.
Press [R, T] to select OK? YES and
then press [OK].
BLUETOOTH READY is shown.
To cancel, select OK? NO.

Using the main unit

Preparation
Press [RADIO/AUX] to select FM or AM.

The following marks indicate the availability of


the feature.
CD-R/RW in CD-DA format or with
CD :
MP3 files.
USB :
USB device with MP3 files.
BLUETOOTH : Bluetooth device.

Basic playback
CD USB BLUETOOTH

Play

Press [4/9].

Stop

Press [8].

1
2
3

1
2

Skip

Press [2/3] or [5/6] to


skip track.
CD USB

Press [R, T] to skip MP3 album.


Search

Press and hold [2/3] or


[5/6].

Note:
Depending on the Bluetooth device, some
operations may not work.

Note:
Maximum characters that can be shown:
Approximately 32
This system supports ver. 1.0, 1.1 and 2.3 ID3
tags.
Text data that the system does not support can
show differently.

Press [USB REC 7/9] to start recording.


The name of the folder that keeps the
recording is shown.

Press [TUNE MODE] to select MANUAL.

Stop
recording

Press [8]. WRITING is shown.

Press [2/3] or [5/6] to tune in


to the station.

Pause
recording

Press [USB REC 7/9] during


recording.
Press again to continue recording.
Note:
You can pause during recording
from the radio or AUX (except in
SYNCHRO mode). A track mark is
added every time you pause
(ZAdding track marks).

Automatic presetting

1
2

Press [PLAY MENU] to select A.PRESET.


Press [R, T] to select LOWEST or
CURRENT and then press [OK].
LOWEST

Tuning begins from the


lowest frequency.

CURRENT

Tuning begins from the


current frequency.

The tuner presets all the stations it can


receive into the channels in ascending order.
To cancel, press [8].

Manual presetting

1
2
3
4
5

Press [PLAY MENU] to select


TUNE MODE.
Press [R, T] to select MANUAL and
then press [OK].

Note:
Wait for a few seconds for the system to prepare
the USB device before you start recording.
When the next track of the disc is being
recorded, it will be shown on the display.

High-speed recording
CD-DA disc recording speed:
CD, CD-R: Three times (3x) the normal speed.
CD-RW: Two times (2x) the normal speed.

1
2
3
4

1
2
3

Before recording
1 Press [SETUP] to select REC MODE.
Press [R, T] to select the mode and then
press [OK].

MANUAL

SYNCHRO
(For AUX
source)

Press [R, T] to select the setting and


then press [OK].

OFF
PLAYMODE
1-TRACK
1

Cancel the setting.


Play one selected track.
Press [2/3] or [5/6]
to select the track.

Play one selected MP3 album.


Press [R, T] to select the MP3
album.

RANDOM

Play all tracks randomly.

1-ALBUM

RND

1-ALBUM
RANDOM
1

RND

Play all tracks in one selected


MP3 album randomly.
Press [R, T] to select the MP3
album.

1
2

Press [PLAY MENU] to select FM MODE.


Press [R, T] to select MONO and then
press [OK].
To cancel, select STEREO.
MONO is also canceled when you change
the frequency.
To memorize the setting
Continue with step 4 of Manual presetting.

Note:
During recording, if you press [OK] or pause
recording while using TIME MARK mode, the
5-minute counter is reset.
You cannot add track marks manually in
SYNCHRO mode.

Recording MP3 tracks

Press [R, T] to select the setting that


provides the best reception and then
press [OK].

FM

The FM signal is in monaural.


The system is not tuned in to a
station.

FM ST

The FM signal is in stereo.

FM MONO

MONO is selected as the


FM MODE.

AM/FM allocation setting


By main unit only
For South America

This system can also receive AM broadcasts


allocated in 10 kHz steps.
For Central America and the Caribbean

Repeat 1-TRACK.

1
2

RANDOM
REPEAT

Press [R, T] to select OK? YES and


then press [OK].
PAIRING is shown.
To cancel, select OK? NO.

Repeat random playback.

Link mode
BLUETOOTH

Press and hold [ PAIRING] until


PAIRING is shown.

You can change the link mode to suit the


connection type.

Select SC-AKX200 from the Bluetooth


menu of the device.

Preparation
If this system is connected to a Bluetooth
device, disconnect it (ZDisconnecting a
device).

Press and hold [RADIO/AUX].

After a few seconds, the display panel shows the


current minimum radio frequency. Release the
button when the minimum frequency changes.
To go back to the initial setting, do the above
steps again.
Preset frequencies are erased after you
change the setting.

Recording

Note:
During random playback, you cannot skip to
tracks which have been played.
The setting is canceled when you open the disc
tray.

Press [RADIO/AUX] to select FM or AM.

Repeat 1-ALBUM RANDOM.

RND

Press [PLAY MENU] to select


LINK MODE.
Press [R, T] to select the mode and then
press [OK].

MODE 1

Emphasis on connectivity.

MODE 2

Emphasis on sound quality.

Note:
Select MODE 1 if the sound is interrupted.

Press [R, T] to select the setting and


then press [OK].

Rear panel of
this main unit

Using the main unit


Press [DJ JUKEBOX] to select the setting.
OFF CROSSFADE

Cancel cross-fading.

ON CROSSFADE

Add cross-fading.

OFF

Switch off DJ jukebox.

Audio cable
(not supplied)

Press [PLAY MENU] to select


PLAYMODE.

1
2
3

Press [R, T] to select the setting and


then press [OK].

Using the main unit


In the stop mode, turn [MULTI CONTROL] to
select the setting.

Changing the repeat setting

1
2

RANDOM REPEAT

Note:
DJ jukebox is switched off when you switch off the
system, change to another source or during
recording.

Using the Panasonic MAX Juke app


You can download and install the free
Android app Panasonic MAX Juke on
Google Play for additional features, such as
to request song playback from multiple
devices simultaneously.

Clock and timers


Setting the clock

Record all
tracks

This system can record up to 800 folders


(maximum 999 tracks in an album) or a total of
8000 tracks, depending on the available
storage capacity of the USB device in USB B .
To check storage space
In the stop mode, press [DISPLAY].
UPDATE is shown when the system is
reading the device.
NO DEVICE is shown if there is no USB
device connected to USB B .
Note:
All recordings are in .mp3 format.
You cannot do recording when you are using
random playback mode.
DJ jukebox is switched off during recording.
Repeat playback mode is canceled during
recording.
A new album is added each time you do a
recording.
The sequence of album may change after the
recording.
The recordings are kept in a folder named
REC_DATA in the USB device.
USB status indicator blinks in red during
recording.

Select OFF PLAYMODE


(ZPlay menu).

This is a 24-hour clock.


For Central America and the Caribbean

This is a 12-hour clock.

1
2

Press [USB REC 7/9] to start recording.

Stop
recording

Press [8].
Recording stops at the last fully
recorded track in the album. For
example, if you stop recording
during the fourth track, only the
first three tracks are recorded.
NO FILE RECORDED is shown
if no track is recorded.

Note:
Some tracks can use a longer time to record.
Some tracks cannot be recorded because of the
condition of the source.
When recording from an MP3 disc, the recorded
file name is different from the original file.
When recording from USB A , the recorded file
name is the same as the original file (maximum
32 characters).

Deleting the recorded tracks


1
2
3
4
5

Press [USB/CD] to select USB B.


Press [R, T] to select the album.
Press [2/3] or [5/6] to select
the track.
Press [SETUP] to select EDIT MODE.
Press [R, T] to select the mode.
TRK DEL

Delete a single track.

ALB DEL

Delete one album (maximum


999 tracks).

FORMAT

6
7
8

Format the USB device.

Press [R, T] to set the time and then


press [OK].

Note:
Reset the clock regularly to maintain accuracy.

Sleep timer

(Except for Bluetooth and AUX source)

You can set the timer to come on at a certain


time to:
Wake you up (play timer).
Record from the radio (record timer).
Play timer and record timer cannot be used
together.
Preparation
Set the clock.

1
2
3
4
5

1
2
3

Press [SOUND] (main unit: [LATIN EQ]) to


select MANUAL EQ.
Press [R, T] to select the sound effect.
Or turn [MULTI CONTROL] to select the
sound effect.
Press [2/3] or [5/6] to select
the setting and then press [OK].

Press [R, T] to select #PLAY or


#REC and then press [OK].
Press [R, T] to set the start time and
then press [OK].
Do step 3 again to set the end time.
Press [R, T] to select the source you
want to play or record and then press
[OK].

Prepare the source.


Play timer

Record timer

2
3

Press [SOUND] (main unit: [LATIN EQ]) to


select PRESET EQ.

Manual EQ

Press [SETUP] to select TIMER ADJ.

To start the timer

Press [OK].
SURE? NO is shown.

Press [R, T] to select the desired preset


EQ setting and then press [OK].
Or turn [MULTI CONTROL] to select the
desired preset EQ setting.

Press [R, T] to select the setting (in


minutes) and then press [OK].
To cancel, select OFF.

Play timer and record timer

Preset EQ

Press [SETUP] to select SLEEP.

Note:
The remaining time is always shown on the
display. The display changes temporarily when
you perform other operations.
The play timer and sleep timer or the record
timer and sleep timer can be used together.
The sleep timer always comes first. Be sure not
to set an overlap of timers.

Sound effects
1

Press [PLAY MENU] to select


INPUT LEVEL.
Press [R, T] to select NORMAL or
HIGH and then press [OK].

Note:
You cannot adjust the input level during
recording.
Select NORMAL if the sound is distorted
during HIGH input level.
Components and cables are sold separately.
If you want to connect equipment other than
those described, refer to the audio dealer.
Sound distortion can occur when you use an
adapter.

Others

This system automatically switches off when


you do not use it for approximately 20 minutes.

1
2

Press [SETUP] to select AUTO OFF.


Press [R, T] to select ON and then
press [OK].
To cancel, select OFF.

Note:
This function does not work when you are in radio
source or when a Bluetooth device is connected.

Bluetooth standby
This function automatically switches on the
system when you establish a Bluetooth
connection from a paired device.

1
2

Press [SETUP] to select


BLUETOOTH STANDBY.
Press [R, T] to select ON and then
press [OK].
To cancel, select OFF.

Note:
Some devices may take longer to respond. If you
are connected to a Bluetooth device before
switching off the system, wait for a minimum of
5 seconds before connecting to this system from
your Bluetooth device again.

Software version
You can check the software version of the
system.

Press [OK].
The selected item to be deleted is shown.

Press [R, T] to select SURE? YES and


then press [OK].
WRITING is shown.
To cancel, select SURE? NO.

Play the external equipment.

Press [SETUP] to select CLOCK.

To check the time


Press [SETUP] to select CLOCK and then
press [OK].
In standby mode, press [DISPLAY].

Record a
Select 1-ALBUM or
specified album 1-TRACK
or track
(ZPlay menu).

Press [RADIO/AUX] to select AUX.

To adjust the input level

For South America

1
2

Prepare the source you want to record.

Connect the external equipment.

Auto off

When FM is selected
Press [DISPLAY].

1-TRACK
REPEAT

Preparation
Disconnect the AC power supply cord.
Switch off all equipment and read the
appropriate operating instructions.
DVD player (not supplied)

Press [PLAY MENU] to select


JUKEBOX.

The sleep timer switches off the system after


the set time.

Checking the signal status

Repeat all tracks.

Repeat 1-ALBUM.

You can record MP3 tracks from MP3 disc or


USB A to USB B .

Press [PLAY MENU] to select B.PROOF.

ALL REPEAT

1-ALBUM
REPEAT

A track is automatically divided


at 5-minute intervals.

Press [TUNE MODE] to select PRESET.

This system can also receive FM broadcasts


allocated in 0.2 MHz steps.

Recording starts automatically


when the other equipment
starts to play.
Recording pauses when it
detects silence for 3 seconds.

TIME MARK

USB

You can use DJ jukebox to add cross-fading


effect between songs. You can also use
additional features with the Panasonic MAX
Juke app (Zbelow).

When FM is selected

Press [PLAY MENU].


Press [PLAY MENU] to select
PLAYMODE.

Add a track mark manually.


Press [OK] during recording to
add a track mark.

Press [2/3] or [5/6] to select


the preset station.

Improving the sound quality

USB

Press [R, T] to select NORMAL or


HI-SPEED and then press [OK].

When recording from radio or external equipment,


you can divide tracks using various modes.

Press [2/3] or [5/6] to select


the preset station.

You can connect a VCR, DVD player etc. and


listen to the audio through this system.

Repeat all tracks.

Press [R, T] to select a preset number


and then press [OK].
Do steps 3 through 5 again to preset more
stations.
The new station replaces any station that
occupies the same preset number.

Press [R, T] to select PRESET and


then press [OK].

DJ jukebox

ALL TITLE REPEAT

Press [USB REC 7/9] to start recording.

Note:
The play timer starts at a low volume and
increases gradually to the preset level.
The record timer starts 30 seconds before the
set time with the volume muted.
The timer comes on at the set time every day if
the timer is on.
If you switch off the system and then switch on
again while a timer is in operation, the timer will
not stop at the end time.

External equipment

Repeat random
playback.

Adding track marks

Press [PLAY MENU] to select


TUNE MODE.

Press [2/3] or [5/6] to select


the setting and then press [OK].
Or turn [MULTI CONTROL] to select the
setting.

RND

Press [OK].

Press [SOUND] to select D.BASS and


then press [R, T] to select
D.BASS LEVEL or D.BASS BEAT.
Or press [D.BASS] on the main unit to select
D.BASS LEVEL or D.BASS BEAT.
To cancel, select OFF D.BASS.

Press [SETUP] to select REC MODE.

Press [2/3] or [5/6] to tune in


to the station.

Using the main unit

1
2

Put in the disc you want to record.

Note:
If you cannot record at high-speed because of
the condition of the disc, record at normal speed.
The sound is muted during high-speed recording.

Selecting a preset station

CD

1-ALBUM
RANDOM
REPEAT

Note:
You can pair up to 8 devices with this system. If a
9th device is paired, the device that has not been
used for the longest time will be replaced.

You can preset up to 30 FM and 15 AM stations.

1
2

CD USB

RND

Select SC-AKX200 from the Bluetooth


menu of the device.
If prompted for a passkey, input 0000.
The device connects with this system
automatically after pairing is complete.
The name of the connected device is
shown for a few seconds.

Make sure the disc is stopped.


Radio
Tune in to the radio station.
External equipment
Connect and play the equipment
(ZExternal equipment).

When AM is selected

Play menu

Select OFF PLAYMODE


(ZPlay menu).

Record a
Select 1-TRACK
specified track (ZPlay menu).

Press [R, T] to select MANUAL and


then press [OK].

CD USB BLUETOOTH

Press [DISPLAY].

Record all
tracks

Memory presetting

The position is memorized.


RESUME is shown.
Press again to stop fully.
Press [4/9].
Press again to continue playback.

Select the source you want to record.


CD-DA
Prepare the disc playback mode.

Press [PLAY MENU] to select


TUNE MODE.

Press [2/3] or [5/6] to tune in


to the station.
To tune automatically, press and hold the
button until the frequency starts changing
quickly.
STEREO is shown when a stereo
broadcast is being received.

Using the main unit

USB

Pause

Manual tuning

Note:
A device is disconnected when you:
Select a different source.
Move the device out of the maximum range.
Disable the Bluetooth transmission of the device.
Switch off the system or the device.

Press [PLAY MENU] to select PAIRING.

Using the main unit

Intended usage
This system is for normal, general use only.
Do not use this system near an equipment or
in an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc.).

Press [ ].

You can view the available information, such as


MP3 album and track number, on the display
panel.

Disc

I Adjust the volume level

M Remote control sensor

1
2

Viewing available information

Preparing media

H Decrease the brightness of the display

L Select the sound effects

Disconnecting a device

Connect the speakers.

To cancel, press the button again.


MUTE is also canceled when you adjust
the volume or when you switch off the
system.

Start playback on the device.

Note:
A device must be paired to connect.
This system can only connect to one device at a
time.
When BLUETOOTH is selected as the source,
this system will automatically try to connect to
the last connected device.

Connect the FM indoor antenna.


Put the antenna where reception is best.

F Select or confirm the option

panel
To cancel, press the button again.

Select SC-AKX200 from the Bluetooth


menu of the device.
The name of the connected device is
shown for a few seconds.

D.Bass

Basic recording

Radio

Media playback

E View the content information


G Open or close the disc tray

Press [ ].
BLUETOOTH READY is shown.

Press and hold [ PAIRING] until


PAIRING is shown.

Preparation
Before you connect a USB device to the
system, make sure you do a backup of the
data.

D View the setup menu

(N2QAYB001019)

Preparation
If this system is connected to a Bluetooth
device, disconnect it (ZDisconnecting a
device).

Note:
Keep your speakers more than 10 mm from the
main unit for ventilation.
Put the speakers on a flat safe surface.
These speakers do not have magnetic shielding.
Do not put them near TVs, PCs or other
equipment easily influenced by magnetism.
When you play at high levels for a long period, it
can cause damage to the speakers and
decrease the life of the speakers.
Decrease the volume in these conditions to
prevent damage:
When the sound is distorted.
When you adjust the sound quality.

800-PANA737 (800-7262737)

Overview of controls

Safety precautions

Use only the supplied speakers.


You can cause damage to the system and
decrease the sound quality if you use other
speakers.

1800-PANASONIC
(1800-726276)

El Salvador 800-PANA (800-7262)

Your system and the illustrations can look


differently.
These operating instructions are applicable to
the following system.

The left and right speakers are the same.


You cannot remove the net of the speakers.

Obtain product information and operative


assistant; localize the closer distributor or
Service Center; buy spare parts and
accessories by our web site to Latin American:
http://www.lar.panasonic.com
Also you may contact us directly by our
Contact Center:

Connecting a device

Placement of speakers

Prepare the source you


want to listen to (disc, USB
or radio) and set the
volume.
Connect the USB device to
USB B and tune in to the
radio station.

Press [SETUP] to select TIMER SET.


Press [R, T] to select the setting and
then press [OK].
PLAY ON

Start the play timer.

PLAY OFF

Cancel the play timer.

REC ON

Start the record timer.

REC OFF

Cancel the record timer.

# is shown.
The system must be switched off for the
timer to operate.
To check the setting

1
2

Press [SETUP] to select TIMER ADJ.


Press [R, T] to select #PLAY or
#REC and then press [OK].

In standby mode, press [DISPLAY] two times.

1
2

Press [SETUP] to select SW VER. and


then press [OK].
The software version is shown.
Press [OK] again to exit.

Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated do
not solve the problem, consult your dealer for
instructions.

Common problems
The unit does not work.
The safety device has been activated. Do the
following:
1. Press [1] on the main unit to switch the unit
to standby mode. If the unit does not switch
to standby mode,
Press and hold the button for a minimum of
10 seconds. Or,
Disconnect the AC power supply cord and
then connect it again.
2. Press [1] again to switch on the unit. If the
problem persists, consult your dealer.
The display panel lights up and changes
continuously in standby mode.
Press and hold [8] on the main unit to select
DEMO OFF.
No operations can be done with the remote
control.
Examine that the battery is installed correctly.
Sound is distorted or no sound.
Adjust the volume of the system.
Switch off the system, determine and correct the
cause, and then switch on again. It can be
caused by straining of the speakers through
excessive volume or power, and when using the
system in a hot environment.
A humming sound can be heard during playback.
An AC power supply cord or fluorescent light is
near the cables. Keep other appliances and
cords away from the cables of this system.
The sound level reduces.
The protection circuit has been activated due to
the continuous use at high volume output. This
is to protect the system and maintain the sound
quality.

Disc
Display not shown correctly.
Playback does not start.
You have not put in the disc correctly. Put it in
correctly.
Disc is dirty. Clean the disc.
Replace the disc if it is scratched, warped, or
non-standard.
There is condensation. Let the system dry for
1 to 2 hours.
The total number of tracks displayed is incorrect.
The disc cannot be read.
Distorted sound is heard.
You put in a disc that the system cannot play.
Change to a playable disc.
You put in a disc that has not been finalized.

USB
The USB device or the contents in it cannot be
read.
The format of the USB device or the contents in
it are not compatible with the system.
USB devices with storage capacity of more than
32 GB cannot work in some conditions.
Slow operation of the USB device.
Large content size or large memory USB device
takes longer time to read.

Bluetooth
Pairing cannot be done.
Check the Bluetooth device condition.
The device is out of the 10 m communication
range. Move the device nearer to the system.
The device cannot be connected.
The pairing of the device was unsuccessful. Do
pairing again.
The pairing of the device has been replaced. Do
pairing again.
This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The system may have a problem. Switch off the
system and then switch on again.
The device is connected but audio cannot be
heard through the system.
For some built-in Bluetooth devices, you have
to set the audio output to SC-AKX200
manually. Read the operating instructions of the
device for details.
Sound from the device is interrupted.
The device is out of the 10 m communication
range. Move the device nearer to the system.
Remove any obstacle between the system and
the device.
Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Move the device
nearer to the system and distance it from the
other devices.
Select MODE 1 for stable communication.

Radio
Sound is distorted.
Use an optional FM outdoor antenna. The
antenna should be installed by a competent
technician.
A beat sound is heard.
Switch off the TV or move it away from the
system.
Move mobile telephones away from the system
if the interference is apparent.
When in AM tuner mode, select the B.PROOF
setting that provides the best reception.
A low hum is heard during AM broadcasts.
Move the antenna away from other cables and
cords.

Main unit displays


ADJUST CLOCK
The clock is not set. Adjust the clock.
ADJUST TIMER
The play timer and/or record timer is not set.
Adjust the play timer and/or record timer.
ALB FULL
The number of albums has exceeded the
supported limit.
AUTO OFF
The system has not been used for 20 minutes
and will switch off within a minute. To cancel,
press any button.
CANT REC
DEVICE FULL
You cannot do recording because the remaining
recording time of the USB device is less than the
total time of the music source. Change to a USB
device which has enough recording time and do
the recording again.
ERROR
An incorrect operation was done. Read the
instructions and try again.
ERROR (during recording)
You cannot select other playback source
(example: radio, USB etc.) or press [2/3] or
[5/6] during recording. Stop the recording
function.
You cannot open the disc tray when recording
from an AM source.
F61
Examine and correct the speaker cords
connection.
Disconnect the USB device. Switch off the
system and then switch on again.
F70
Examine the Bluetooth connection.
Disconnect the Bluetooth device. Switch off the
system and then switch on again.
F76
There is a problem with the power supply.
Disconnect the AC power supply cord and
consult your dealer.
F77
Disconnect the AC power supply cord and
consult your dealer.
NO DEVICE
The USB device is not connected. Examine the
connection.
You cannot do recording or check available
storage space because there is no USB device
connected to USB B .
NO DISC

You have not put in a disc.


NO PLAY
UNSUPPORT
Examine the content. You can only play
supported format.
The files in the USB device can be corrupted.
Format the USB device and try again.
The system may have a problem. Switch off the
system and then switch on again.

Remote control code


When other Panasonic equipment responds to
the remote control of this system, change the
remote control code for this system.
Preparation
Press [USB/CD] to select CD.

To set the code to REMOTE 2

1
2

Press and hold [USB/CD] on the main


unit and [USB/CD] on the remote control
until REMOTE 2 is shown.
Press and hold [OK] and [USB/CD] on
the remote control for a minimum of
4 seconds.

To set the code to REMOTE 1

1
2

Press and hold [USB/CD] on the main


unit and [ ] on the remote control until
REMOTE 1 is shown.
Press and hold [OK] and [ ] for a
minimum of 4 seconds.

System memory reset


Reset the memory when the following
situations occur:
There is no response when buttons are
pressed.
You want to clear and reset the memory
contents.

1
2

Disconnect the AC power supply cord.


While you press and hold [1] on the
main unit, connect the AC power supply
cord again.
Continue to press and hold the button until
is shown.
Release [1].
All the settings are set back to the factory
preset.
It is necessary to set the memory items
again.

Specifications
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
200 W per channel (4 ), 1 kHz, 30% THD
Total RMS stereo mode power
400 W

Tuner, terminals section


Preset memory
Frequency modulation (FM)
Frequency range
For South America

87.50 MHz to 108.00 MHz (50 kHz step)


For Central America and the Caribbean

87.5 MHz to 108.0 MHz (100 kHz step)


87.9 MHz to 107.9 MHz (200 kHz step)
Antenna terminals
75 (unbalanced)
Amplitude modulation (AM)
Frequency range
For South America

522 kHz to 1629 kHz (9 kHz step)


520 kHz to 1630 kHz (10 kHz step)
For Central America and the Caribbean

520 kHz to 1710 kHz (10 kHz step)


AUX
Audio input

Disc played (8 cm or 12 cm)


CD, CD-R/RW (CD-DA, MP3 )
MPEG-1 Layer 3
Pick up
Wavelength

USB port
USB standard
USB 2.0 full speed
Media file format support
MP3 (*.mp3)
USB device file system
FAT12, FAT16, FAT32
USB recording
Bit rate
USB recording speed
Recording file format

Version

activated, and the system will switch off. Let the


unit cool down before switching it on again.
Check that the ventilation opening of the unit is
not obstructed.
Ensure this unit is well ventilated.
TRK FULL
The number of files has exceeded the supported
limit.
USB OVER CURRENT ERROR
The USB device is using too much power.
Disconnect the USB device, switch off the
system and then switch on again.

Bluetooth Ver. 2.1 + EDR

Class
Supported profiles
Operating frequency
Operation distance

Class 2
A2DP, AVRCP, SPP
2.4 GHz band, FH-SS
10 m line of sight

Speaker section
Speaker unit(s)
Woofer
Tweeter

16 cm cone type
6 cm cone type
4

Impedance

Dimensions (W x H x D)
200 mm x 334 mm x 233 mm
Mass

Power supply

TEMP NG

128 kbps
1x, 3x (CD only)
MP3 (*.mp3)

Bluetooth section

General

The temperature protection circuit has been

790 nm (CD)

USB section

PLAYERROR
An unsupported MP3 file has been played. The
system will skip that track and play the next one.

REMOTE 1
REMOTE 2
The remote control and the main unit are using
different codes. Change the code of the remote
control.
When REMOTE 1 is shown, press and hold
[OK] and [ ] for a minimum of 4 seconds.
When REMOTE 2 is shown, press and hold
[OK] and [USB/CD] for a minimum of
4 seconds.

Pin jack (1 system)

Disc section

NO TRACK
There is no album or track in the USB device.

REC ERROR
You disconnected the USB device during
recording. Connect the USB device and do
recording again.
An error occurred during USB recording.
Disconnect the USB device and then connect it
again.

FM 30 stations
AM 15 stations

3.3 kg

For South America AC 220 V to 240 V, 50/60 Hz


For Central America and the Caribbean

AC 120 V, 60 Hz
Power consumption
For South America
For Central America and the Caribbean

60 W
53 W

Dimensions (W x H x D)
348 mm x 193 mm x 251 mm
Mass

2.5 kg

Operating temperature range

0C to +40C

Operating humidity range


35% to 80% RH (no condensation)
Power consumption in standby mode
(approximate)
For South America
0.5 W
For Central America and the Caribbean
0.3 W
Power consumption in standby mode
(approximate)
(With BLUETOOTH STANDBY set to ON)
For South America
0.6 W
For Central America and the Caribbean
0.4 W
Note:
Specifications are subject to change without
notice.
Mass and dimensions are approximate.
Total harmonic distortion is measured by the
digital spectrum analyzer.

VBR
The system cannot show the remaining play
time for variable bit rate (VBR) tracks.

05/01/2015 5:08:05 PM

Su sistema y las ilustraciones pueden diferir.


Estas instrucciones de funcionamiento son
para el sistema siguiente.
Sistema

SC-AKX200

Unidad principal

SA-AKX200

Bocinas

SB-AKX200

La grabacin y reproduccin de contenido en


este u otros dispositivos puede requerir
permiso del propietario de los derechos de
autor u otros derechos de ese tipo del
contenido. Panasonic no le otorga ese
permiso ni tiene autoridad para hacer y
explcitamente renuncia a cualquier derecho,
habilidad o intencin de obtener ese permiso
en su nombre. Es su responsabilidad
garantizar que el uso de este o cualquier
otros dispositivos cumplan con la legislacin
de derechos de autor aplicable de su pas.
Consulte esa legislacin para obtener ms
informacin sobre las leyes y regulaciones
relevantes involucradas o comunquese con
el propietario de los derechos del contenido
que desea grabar o reproducir.

Accesorios suministrados

Directorio de Atencin al
Cliente
Obtenga informacin de productos y
asistencia operativa; localice el distribuidor o
Centro de Servicio ms cercano; compre
repuestos y accesorios a travs de nuestro
Sitio Web para Amrica Latina:
http://www.lar.panasonic.com
Adems puede contactarnos directamente a
travs de nuestro Contact Center:

PRECAUCIN!
Use las bocinas slo con el sistema
recomendado. De lo contrario, puede
provocar daos al amplificador y las
bocinas y provocar un incendio.
Consulte a un tcnico de servicio
especializado si se ha producido algn
dao o si se ha producido un cambio
repentino en su funcionamiento.
Lleve a cabo los procedimientos
incluidos en estas instrucciones cuando
instale las bocinas.

Panam

800-PANA (800-7262)

Colombia

01-8000-94PANA
(01-8000-947262)

Cmo realizar las conexiones

Ecuador

1800-PANASONIC
(1800-726276)

Costa Rica

800-PANA737 (800-7262737)

Conecte el cable de alimentacin de CA


slo despus de haber hecho todas las
dems conexiones.

Para Centroamrica y el Caribe

La operacin de este equipo est sujeta a las


siguientes dos condiciones: (1) es posible
que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o
dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar
su operacin no deseada.

1 Cable de alimentacin de CA
1 Antena de cuadro de AM
1 Antena interior de FM
1 Control remoto
(N2QAYB001019)

1 Pila del control remoto

Licencias
La marca Bluetooth y sus logos son marcas
registradas propiedad de Bluetooth SIG, Inc.
y cualquier uso de dichas marcas por parte
de Panasonic Corporation se realiza bajo
licencia. Otros nombres de marcas y marcas
comerciales son propiedad de sus
respectivos propietarios.
Google Play y Android son marcas
comerciales de Google Inc.
Tecnologa de codificacin de audio MPEG
de Layer-3 con licencia de Fraunhofer IIS y
Thomson.

Mantenimiento
Utilice un pao suave y seco para limpiar
este sistema.
Nunca utilice alcohol, diluyente de pintura ni
gasolina para limpiar este sistema.
Antes de utilizar un pao impregnado
qumicamente, lea con atencin las
instrucciones suministradas con el mismo.

Medidas de seguridad
ADVERTENCIA!
Unidad
Para reducir el riesgo de incendios,
descargas elctricas o daos en el producto,
No exponga esta unidad a la lluvia,
humedad, goteo o salpicaduras.
No coloque objetos con lquidos, como
por ejemplo floreros, encima de esta
unidad.
Utilice solamente los accesorios
recomendados.
No retire las tapas.
No repare esta unidad usted mismo.
Refiera el servicio a un personal de
servicio cualificado.
No permita que objetos de metal caigan
dentro esta unidad.

PRECAUCIN!
Unidad
Para reducir el riesgo de incendios,
descargas elctricas o daos en el producto,
Para mantener bien ventilada esta unidad,
no la instale ni ponga en un estante de
libros, mueble empotrado u otro espacio
de dimensiones reducidas.
No obstruya las aberturas de ventilacin
de la unidad con peridicos, manteles,
cortinas u objetos similares.
No coloque objetos con llama descubierta,
una vela por ejemplo, encima de esta
unidad.
Esta unidad ha sido diseada para ser
utilizada en climas moderados.
Esta unidad puede tener interferencias
causadas por telfonos mviles durante su
utilizacin. Si ocurren tales interferencias,
aumente la separacin entre esta unidad y el
telfono mvil.
Esta unidad utiliza un lser. El usar los
controles, hacer los ajustes o los pasos
requeridos en forma diversa de la aqu
expuesta puede redundar en exposicin
peligrosa a la radiacin.
Coloque la unidad en una superficie plana
lejos de la luz directa del sol, altas
temperaturas, mucha humedad, y vibracin
excesiva.
Cable de alimentacin de CA
El enchufe del equipo es el acceso principal
a la corriente elctrica o al corte de energa.
Instale esta unidad de manera que el cable
de alimentacin se pueda desenchufar
desde el tomacorriente inmediatamente si
ocurre un problema.
Pila
Hay peligro de explosin si se sustituye
incorrectamente la pila. Slo sustituya con el
tipo recomendado por el fabricante.
Al desechar las pilas, comunquese con sus
autoridades locales o con su distribuidor y
pregunte sobre el mtodo correcto de
eliminacin.
No caliente o exponga a las llamas.
No deje la(s) pila(s) en un automvil expuesto
a luz solar directa durante un largo perodo
de tiempo con las puertas y ventanas
cerradas.
No desarme o provoque un cortocircuito con
la pila.
No intente recargar una pila alcalina o de
manganeso.
No use una pila cuya cubierta haya sido
arrancada.
Saque la pila si no va a usar el control
remoto durante un perodo prolongado.
Gurdelas en un lugar fresco y oscuro.

Acerca de Bluetooth
Panasonic no se responsabiliza por datos y/o
informacin que podran correr algn riesgo
durante la transmisin inalmbrica.
Banda de frecuencia
Este sistema utiliza la banda de frecuencia
de 2.4 GHz.
Certificacin
Este sistema cumple con las restricciones de
frecuencia y tiene una certificacin recibida
basada en las leyes de frecuencia. Por lo
tanto, no se necesita un permiso de
conexin inalmbrica.
Las siguientes acciones son castigadas por
la ley:
Separar o modificar la unidad principal.
Retirar las indicaciones de la
especificacin.
Restricciones de uso
No se garantiza la transmisin inalmbrica o
el uso con todos los dispositivos equipados
con Bluetooth.
Todos los dispositivos deben cumplir con las
normas establecidas por Bluetooth SIG, Inc.
Segn las especificaciones y los ajustes de
un dispositivo, es posible que no se pueda
conectar o algunas operaciones pueden ser
diferentes.
Este sistema admite las funciones de
seguridad de Bluetooth. Segn los ajustes o
el ambiente de operacin, es posible que
esta seguridad no sea suficiente. Transmita,
con cuidado, los datos de forma inalmbrica
a este sistema.
Este sistema no puede transmitir los datos a
un dispositivo Bluetooth.
Rango de uso
Use este dispositivo en un rango mximo de
10 m.
El rango se puede disminuir segn el
ambiente, los obstculos o la interferencia.
Interferencia de otros dispositivos
Este sistema puede no funcionar
correctamente y los problemas como ruido y
saltos de sonido pueden surgir debido a la
interferencia de ondas de radio, si esta
unidad est ubicada demasiado cerca de
otros dispositivos Bluetooth o de
dispositivos que usan la banda 2.4 GHz.
Este sistema puede no funcionar
correctamente si las ondas de radio de una
estacin de emisin cercana, etc. son
demasiado fuertes.
Uso previsto
Este sistema es para el uso general normal
solamente.
No use este sistema cerca de un equipo o en
un ambiente sensible a la interferencia de la
frecuencia de radio (ejemplo: aeropuertos,
hospitales, laboratorios, etc.).

Guatemala
Chile

Venezuela

800-PANA-800
(800-7262-800)

Uruguay

0-800-PANA (0-800-7262)

Per

0-800-00-PAN (0-800-00726)

Argentina

0800-333-PANA
(0800-333-7262)
0810-321-PANA
(0810-321-7262)

Paraguay
Dominican
Republic

0800-11-PANA
(0800-11-7262)

En la unidad principal:
Para iniciar a emparejar el Bluetooth, pulse
y mantega pulsado [ PAIRING].

C Control de reproduccin bsica


D Ver el men de configuracin

1
2
3
4

I Ajusta el nivel de volumen


J Desactivar el sonido
Para cancelar, pulse el botn nuevamente.
MUTE tambin se cancela cuando usted
ajusta el volumen o cuando apaga el
sistema.

K Ver el men de reproduccin

USB A

Puerto USB (
)
Indicador de estado USB
Reproducir pistas MP3.

Nota sobre dispositivo USB

R Bandeja de disco

Este sistema no garantiza la conexin con


todos los dispositivos USB.
Este sistema admite USB 2.0 velocidad total.
Este sistema puede admitir los dispositivos
USB de hasta 32 GB.
Solo se admite el sistema de archivo
FAT 12/16/32.

S Control de operacin de grabacin

USB B

Puerto USB (
)
Indicador de estado USB
Reproducir pistas MP3.
Grabar sonido o pistas musicales.

Q Panel de visualizacin

T Seleccionar DJ jukebox

Cmo preparar el control


remoto

Los archivos se definen como pistas y las


carpetas como lbumes.
Las pistas debe tener la extensin .mp3 o
.MP3.
Las pistas no se reproducirn
necesariamente en el orden de grabacin.
Algunos archivos pueden fallar debido al
tamao del sector.

Conecte las bocinas.


Conecte el cable de alimentacin de CA.
No use un cable de alimentacin de CA de
otro equipo.

Pulse [R, T] para seleccionar


OK? YES y despus pulse [OK].
Se visualiza BLUETOOTH READY.
Para cancelar, seleccione OK? NO.

Reproduccin de medios
Las siguientes marcas indican la disponibilidad
de la funcin.
CD-R/RW en formato CD-DA o con
CD :
archivos MP3.
USB :
Dispositivo USB con archivos MP3.
BLUETOOTH : Dispositivo Bluetooth.

Pulse [PLAY MENU] para seleccionar


TUNE MODE.
Pulse [R, T] para seleccionar
MANUAL y despus pulse [OK].
Pulse [2/3] o [5/6] para
sintonizar la estacin.
Para sintonizar automticamente, pulse y
mantenga pulsado el botn hasta que la
frecuencia comience a cambiar
rpidamente.
Se visualiza STEREO cuando se est
recibiendo una emisora estreo.

Uso de la unidad principal

1
2

Pulse [TUNE MODE] para seleccionar


MANUAL.
Pulse [2/3] o [5/6] para
sintonizar la estacin.

Para revisar el espacio de almacenamiento


Durante el modo detenido, pulse [DISPLAY].
Se visualiza UPDATE cuando el sistema
est leyendo el dispositivo.
Se visualiza NO DEVICE si no hay un
dispositivo USB conectado a USB B .
Nota:
Todas las grabaciones estn en formato .mp3.
No podr grabar cuando est en el modo de
reproduccin aleatoria.
DJ jukebox est desactivada durante la
grabacin.
El modo repetir reproduccin se cancela
durante la grabacin.
Se agrega un nuevo lbum cada vez que usted
realiza una grabacin.
La secuencia del lbum puede cambiar luego de
la grabacin.
Las grabaciones se guardan en una carpeta
denominada REC_DATA en el dispositivo
USB.
Indicador de estado USB parpadear en rojo
durante la grabacin.

Reproducir

Pulse [4/9].

Detener

Pulse [8].

Pausar

Pulse [4/9].
Pulse nuevamente para
reanudar la reproduccin.
Pulse [2/3] o [5/6]
para saltar la pista.
CD USB

Pulse [R, T] para saltar el lbum


MP3.
Buscar

Pulse y mantenga pulsado


[2/3] o [5/6].

Nota:
Caracteres mximos que se pueden mostrar:
Aproximadamente 32
Este sistema es compatible con las etiquetas
ID3 (versin 1.0, 1.1 y 2.3).
La informacin de texto que el sistema no
soporta puede mostrarse de modo distinto.

CD USB

Pulse [R, T] para seleccionar la


configuracin y despus pulse [OK].

Preparacin
Encienda la opcin de Bluetooth en el
dispositivo y ponga el dispositivo cerca del
sistema.
Lea las instrucciones de operacin del
dispositivo para obtener ms detalles.

Pulse [R, T] para seleccionar PRESET


y despus pulse [OK].
Pulse [2/3] o [5/6] para
seleccionar la estacin preconfigurada.

Pulse [TUNE MODE] para seleccionar


PRESET.
Pulse [2/3] o [5/6] para
seleccionar la estacin preconfigurada.

Reproducir un lbum MP3


seleccionado.
Pulse [R, T] para seleccionar
el lbum MP3.

1-ALBUM
1

RANDOM

Reproducir todas las pistas


aleatoriamente.

RND

1-ALBUM
RANDOM
1

Reproducir todas las pistas


de un lbum MP3
seleccionado aleatoriamente.
Pulse [R, T] para seleccionar
el lbum MP3.

RND

Cmo mejorar la calidad del sonido


Cuando se haya seleccionado FM

1
2

Pulse [PLAY MENU] para seleccionar


FM MODE.
Pulse [R, T] para seleccionar MONO y
despus pulse [OK].
Para cancelar, seleccione STEREO.
MONO tambin se cancela cuando
cambia la frecuencia.
Para memorizar la configuracin
Contine con el paso 4 de
Preconfiguracin manual.

Cuando se haya seleccionado AM

1
2

Pulse [PLAY MENU] para seleccionar


B.PROOF.
Pulse [R, T] para seleccionar la
configuracin que proporciona la mejor
recepcin y despus pulse [OK].

Pulse [PLAY MENU] para seleccionar


PAIRING.

1-TRACK
REPEAT

Repetir 1-TRACK.

Cuando se haya seleccionado FM


Pulse [DISPLAY].

Pulse [R, T] para seleccionar


OK? YES y despus pulse [OK].
Se visualiza PAIRING.
Para cancelar, seleccione OK? NO.

Seleccionar SC-AKX200 desde el


men Bluetooth del dispositivo.
Si le pide clave de acceso, ingrese 0000.
El dispositivo se conecta con el sistema
automticamente, despus que se hubiera
completado el emparejamiento.
Se visualiza el nombre del dispositivo
conectado durante unos segundos.

Pulse y mantenga pulsado [ PAIRING]


hasta que se visualice PAIRING.
Seleccionar SC-AKX200 desde el
men Bluetooth del dispositivo.

Preparacin
Si este sistema est conectado a un dispositivo
Bluetooth, desconctelo (ZDesconexin del
dispositivo).

Pulse [OK].

Cmo comprobar el estado de seal

Cmo conectar un dispositivo

Pulse [USB REC 7/9] durante la


grabacin.
Vuelva a pulsar para reanudar la
grabacin.

Repetir todas las pistas.

Nota:
Se pueden emparejar hasta 8 dispositivos con este
sistema. Si se esta emparejando un 9 dispositivo,
se reemplazar el dispositivo que no se us por un
perodo de tiempo ms largo.

Grabacin
con pausa

Pulse [PLAY MENU] para seleccionar


TUNE MODE.

Pulse [ ].
Se visualiza BLUETOOTH READY.
Seleccionar SC-AKX200 desde el
men Bluetooth del dispositivo.
Se visualiza el nombre del dispositivo
conectado durante unos segundos.
Inicie la reproduccin en el dispositivo.

FM

1-ALBUM
REPEAT

Repetir 1-ALBUM.

RANDOM
REPEAT

Repetir la reproduccin
aleatoria.

La seal FM es monoaural.
El sistema no se sintoniza en
una estacin.

FM ST

La seal FM est en estreo.

FM MONO

MONO se selecciona como el


FM MODE.

RND

1-ALBUM
RANDOM
REPEAT
1

Repetir 1-ALBUM RANDOM.

Configuracin de asignacin de
AM/FM

RND

Unidad principal solamente


Nota:
Durante la reproduccin aleatoria, no se puede
saltar a pistas que ya han sido reproducidas.
La configuracin se cancela cuando se abre la
bandeja de disco.

Modo de vnculo

Preparacin
Si este sistema est conectado a un dispositivo
Bluetooth, desconctelo (ZDesconexin del
dispositivo).

1
2

Pulse [PLAY MENU] para seleccionar


LINK MODE.
Pulse [R, T] para seleccionar el modo y
despus pulse [OK].

MODE 1

nfasis en la conectividad.

MODE 2

nfasis en la calidad del sonido.

Nota:
Seleccionar MODE 1 si el sonido se interrumpe.

Nota:
Puede hacer pausa durante la
grabacin desde el radio o AUX
(excepto en modo SYNCHRO). Se
agrega una marca de pista cada vez
que usted hace una pausa
(ZCmo aadir marcas de pista).
Nota:
Espere unos segundos para que el sistema
prepare el dispositivo USB antes de iniciar la
grabacin.
Cuando se grabe la siguiente pista del disco, se
mostrar en la pantalla.

Velocidad de grabacin del disco CD-DA:


CD, CD-R: Tres veces (3x) la velocidad normal.
CD-RW: Dos veces (2x) la velocidad normal.

1
2
3
4

Nota:
Si no puede grabar a alta velocidad debido a la
condicin del disco, grabar a velocidad normal.
El sonido se desactivar durante la grabacin a
alta velocidad.

Cmo aadir marcas de pista


Cuando graba desde una radio o un equipo
externo, puede dividir las pistas utilizando
varios mtodos.
Antes de grabar
1 Pulse [SETUP] para seleccionar
REC MODE.

Pulse [R, T] para seleccionar el modo y


despus pulse [OK].

MANUAL

SYNCHRO
(Para fuente
AUX de
entrada)

TIME MARK

Agregar una marca de pista


manualmente.
Pulse [OK] durante la grabacin
para aadir una marca de pista.
La grabacin iniciar
automticamente cuando otro
equipo inicie la reproduccin.
La grabacin pausa cuando
detecta silencio durante
3 segundos.
La pista se divide
automticamente en intervalos
de 5 minutos.

Nota:
Durante la grabacin, si presiona [OK] o pausa la
grabacin mientras se utiliza el modo
TIME MARK, el contador de 5 minutos de
reiniciar.
No puede agregar marcas de pista
manualmente en el modo SYNCHRO.

Apagado automtico

1
2

Para Centroamrica y el Caribe

Usted puede grabar pistas de MP3 desde


disco de MP3 o USB A a USB B .

Este sistema tambin puede recibir emisiones


de FM asignadas en pasos de 0.2 MHz.

1
2

Pulse [RADIO/AUX] para seleccionar


FM o AM.

Prepare la fuente que desea grabar.


Grabar todas
las pistas

Pulse y mantenga pulsado [RADIO/AUX].

Al cabo de unos cuantos segundos, el panel de


visualizacin mostrar la frecuencia de radio
mnima actual. Suelte el botn cuando la
frecuencia mnima cambie.
Para regresar a la configuracin inicial,
realice los pasos anteriores nuevamente.
Las frecuencias preconfiguradas se borrarn
despus de que cambie la configuracin.

Seleccionar
OFF PLAYMODE
(ZMen de
reproduccin).

Grabar una
Seleccionar 1-ALBUM o
lbum o pista 1-TRACK (ZMen de
especificada reproduccin).

Pulse [USB REC 7/9] para iniciar la


grabacin.

Detener la
grabacin

Pulse [8].
Las grabaciones se detienen en
la ltima pista totalmente
grabada en el lbum. Ejemplo, si
detiene la grabacin durante la
pista cuatro, slo se grabarn las
tres primeras pistas.
Se visualiza
NO FILE RECORDED si no se
graba pista alguna.

Pulse [R, T] para seleccionar la


configuracin (en minutos) y despus
pulse [OK].
Para cancelar, seleccione OFF.

Pulse [USB/CD] para seleccionar


USB B.
Pulse [R, T] para seleccionar el lbum.
Pulse [2/3] o [5/6] para
seleccionar la pista.
Pulse [SETUP] para seleccionar
EDIT MODE.
Pulse [R, T] para seleccionar el modo.
TRK DEL

Borre slo una pista.

ALB DEL

Borrar un lbum (un mximo


de 999 pistas).

FORMAT

Formatee el dispositivo USB.

Pulse [OK].
Se visualiza el tem seleccionado a ser
borrado.
Pulse [OK].
Se visualiza SURE? NO.
Pulse [R, T] para seleccionar
SURE? YES y despus pulse [OK].
Se visualiza WRITING.
Para cancelar, seleccione SURE? NO.

Nota:
El tiempo restante siempre se visualiza en la
pantalla. La pantalla cambia temporalmente
cuando realiza otras operaciones.
El temporizador para reproduccin y de
apagado automtico o el temporizador para
grabacin y de apagado automtico pueden
usarse al mismo tiempo.
El temporizador de apagado automtico
siempre tiene prioridad. Asegrese de no
configurar horas superpuestas.

Temporizador de reproduccin y
grabacin
(Excepto para la fuente de Bluetooth y
AUX)
Puede configurar el temporizador para
activarse a una hora determinada para:
Que lo despierte (temporizador de
reproduccin).
Grabar desde el radio (temporizador de
grabacin).
El temporizador de reproduccin no puede
utilizarse en combinacin con el temporizador
de grabacin.

1
2

Pulse [SOUND] (unidad principal:


[LATIN EQ]) para seleccionar
PRESET EQ.
Pulse [R, T] para seleccionar la
configuracin del ecualizador
preconfigurado deseada y despus
pulse [OK].
O gire [MULTI CONTROL] para seleccionar
la configuracin del ecualizador
preconfigurado.

Pulse [SOUND] (unidad principal:


[LATIN EQ]) para seleccionar
MANUAL EQ.

Para iniciar el temporizador

2
3

Pulse [2/3] o [5/6] para


seleccionar la configuracin y despus
pulse [OK].
O gire [MULTI CONTROL] para seleccionar
la configuracin.

Pulse [SETUP] para seleccionar


TIMER SET.
Pulse [R, T] para seleccionar la
configuracin y despus pulse [OK].
PLAY ON

Iniciar el temporizador de
reproduccin.

PLAY OFF

Cancelar el temporizador
de reproduccin.

REC ON

Iniciar el temporizador de
grabacin.

REC OFF

Cancelar el temporizador
de grabacin.

Para revisar la configuracin

OFF CROSSFADE

Cancela atenuacin
cruzada.

ON CROSSFADE

Agregar atenuacin
cruzada.

OFF

Apague DJ jukebox.

Cmo cambiar la configuracin


repetir

Prepare la fuente.

Se visualiza #.
El sistema debe estar apagado para que el
temporizador funcione.

Uso de la unidad principal


Pulse [DJ JUKEBOX] para seleccionar la
configuracin.

Pulse [R, T] para seleccionar la fuente


que quiera reproducir o grabar y
despus pulse [OK].

Conecte el dispositivo
USB a USB B y sintonice la
estacin de radio.

Pulse [R, T] para seleccionar la


configuracin y despus pulse [OK].

Pulse [PLAY MENU] para seleccionar


PLAYMODE.
Pulse [R, T] para seleccionar la
configuracin y despus pulse [OK].

Uso de la unidad principal


Durante el modo detenido, gire
[MULTI CONTROL] para seleccionar la
configuracin.
RANDOM REPEAT
RND

ALL TITLE REPEAT

Repetir la reproduccin
aleatoria.

1
2

Pulse [SETUP] para seleccionar


TIMER ADJ.
Pulse [R, T] para seleccionar #PLAY
o #REC y despus pulse [OK].

En el modo en espera, pulse [DISPLAY] dos


veces.
Nota:
El temporizador de reproduccin iniciar con un
volumen bajo y aumentar gradualmente hasta
el nivel preconfigurado.
El temporizador de grabacin comenzar
30 segundos antes del tiempo configurado con
el volumen silenciado.
Si el temporizador est activo, se encender
todos los das a la hora configurada.
Si apaga el sistema y despus vuelve a
encender mientras est funcionando el
temporizador, el temporizador no terminar a la
hora final.

Equipo externo
Puede conectar un reproductor de video,
reproductor de DVD, etc. y escuchar el audio a
travs de este sistema.
Preparacin
Desconecte el cable de alimentacin de CA.
Apague todos los equipos y lea las
instrucciones operativas adecuadas.
Reproductor de DVD
(no suministrado)
Panel posterior
de la unidad
principal

Repetir todas las


pistas.

Cable de audio
(no suministrado)

1
2
3

Conecte el equipo externo.


Pulse [RADIO/AUX] para seleccionar
AUX.
Reproduzca desde el equipo externo.

Para ajustar el nivel de entrada

Reloj y temporizadores

Configuracin de la hora

Para Sudamrica

Este es un reloj con un sistema de 24 horas.


Para Centroamrica y el Caribe

Este es un reloj con un sistema de 12 horas.

1
2

Pulse [SETUP] para seleccionar


CLOCK.
Pulse [R, T] para configurar la hora y
despus pulse [OK].

Para revisar la hora


Pulse [SETUP] para seleccionar CLOCK y
despus pulse [OK].
En el modo en espera, pulse [DISPLAY].

1
2

Pulse [SETUP] para seleccionar


BLUETOOTH STANDBY.
Pulse [R, T] para seleccionar ON y
despus pulse [OK].
Para cancelar, seleccione OFF.

Nota:
Algunos dispositivos podran tardar ms tiempo en
responder. Si est conectado a un dispositivo
Bluetooth antes de apagar el sistema, espere un
mnimo de 5 segundos antes de conectar este
sistema de nuevo a su dispositivo Bluetooth.

Versin del software


Puede revisar la versin de software del
sistema.

Pulse [SETUP] para seleccionar


SW VER. y despus pulse [OK].
Se visualiza la versin del software.
Pulse [OK] nuevamente para salir.

Problemas comunes
La unidad no funciona.
La dispositivo de seguridad se ha activado.
Realice lo siguiente:
1. Pulse [1] en la unidad principal para activar
el modo de espera. Si la unidad no entra en el
modo de espera,
Pulse y mantenga pulsado el botn durante
al menos 10 segundos. O,
Desconecte el cable de alimentacin de CA
y luego conctelo nuevamente.
2. Pulse [1] nuevamente para encender la
unidad. Si el problema persiste, consulte a su
distribuidor.
El panel de visualizacin se ilumina y cambia de
manera continua en modo de espera.
Pulse y mantenga pulsado [8] en la unidad
principal para seleccionar DEMO OFF.
No se pueden realizar operaciones con el
control remoto.
Verifique si la pila est instalada correctamente.
El sonido est distorsionado o no hay sonido.
Ajustar el volumen del sistema.
Apague el sistema, determine y corrija la causa,
y a continuacin encienda el sistema
nuevamente. La causa puede ser el esfuerzo de
las bocinas debido a una potencia o a un
volumen excesivo, y la utilizacin del sistema en
un ambiente donde hace calor.
Se oye ruido de zumbido durante la
reproduccin.
Un cable de alimentacin de CA o luz
fluorescente est cerca de los cables. Mantenga
otros aparatos y cables alejados de este
sistema.
El nivel de sonido se reduce.
El circuito de proteccin se ha activado debido
al uso continuo a un volumen alto. Esto sirve
para proteger el sistema y mantener la calidad
del sonido.

Disco
Pantalla no visualizada correctamente.
No se inicia la reproduccin.
No introdujo el disco correctamente.
Introdzcalo correctamente.
El disco est sucio. Limpie el disco.
Reemplace el disco si est rayado, deformado o
no es un disco convencional.
Hay condensacin. Deje que el sistema se
seque durante 1 a 2 horas.
El nmero total de pistas mostrado es
incorrecto.
No se puede leer el disco.
Se oye un sonido distorsionado.
Introdujo un disco que el sistema no puede
reproducir. Cambilo por un disco que s se
pueda reproducir.
Introdujo un disco que no se finaliz.

USB
No es posible leer el dispositivo USB o el
contenido del mismo.
El formato del dispositivo USB o el contenido
del mismo no es compatible con el sistema.
Los dispositivos USB con una capacidad
superior a los 32 GB no funcionarn en algunos
casos.
Funcionamiento lento del dispositivo USB.
El tamao del contenido es muy grande o el
dispositivo USB tarda ms en leer.

Nota:
DJ jukebox se desactiva cuando apaga el sistema,
cambia a otra fuente o durante la graba.

Uso de la aplicacin Panasonic MAX Juke


Puede descargar e instalar la aplicacin
gratuita de Android Panasonic MAX Juke
en Google Play para funciones adicionales,
por ejemplo para solicitar la reproduccin de
la cancin simultneamente desde varios
dispositivos.

Esta funcin enciende automticamente el


sistema cuando establece una conexin
Bluetooth desde un dispositivo emparejado.

Antes de solicitar el servicio de reparaciones


haga las comprobaciones indicadas a
continuacin. Si tiene alguna duda acerca de
algunos de los puntos de comprobacin, o si
los indicados no resuelven el problema,
consulte a su distribuidor para obtener
instrucciones.

Temporizador
de grabacin

Pulse [PLAY MENU] para seleccionar


JUKEBOX.

Modo de espera de Bluetooth

Realice el paso 3 nuevamente para


configurar la hora de finalizacin.

DJ jukebox

Nota:
Esta funcin no funciona cuando se encuentra en
la fuente de radio o cuando est conectado un
dispositivo Bluetooth.

Solucin de problemas

Pulse [2/3] o [5/6] para


seleccionar la configuracin y despus
pulse [OK].

Puede usar DJ jukebox para agregar un efecto


de atenuacin cruzada entre las canciones.
Usted tambin puede usar funciones
adicionales de la aplicacin Panasonic MAX
Juke (Zconsulte abajo).

Pulse [R, T] para seleccionar ON y


despus pulse [OK].
Para cancelar, seleccione OFF.

Pulse [R, T] para configurar la hora de


inicio y despus pulse [OK].

Prepare la fuente que


desea escuchar (disco,
USB o radio) y configure
el volumen.

USB

Pulse [SETUP] para seleccionar


AUTO OFF.

Temporizador
de
reproduccin

Pulse [SOUND] para seleccionar


D.BASS y despus pulse [R, T] para
seleccionar D.BASS LEVEL o
D.BASS BEAT.
O pulse [D.BASS] en la unidad principal
para seleccionar D.BASS LEVEL o
D.BASS BEAT.
Para cancelar, seleccione OFF D.BASS.

Pulse [SETUP] para seleccionar


TIMER ADJ.

Pulse [R, T] para seleccionar el efecto


de sonido.
O gire [MULTI CONTROL] para seleccionar
el efecto de sonido.

D.Bass

Pulse [R, T] para seleccionar #PLAY


o #REC y despus pulse [OK].

Ecualizador manual

Este sistema se apaga automticamente


cuando no lo usa durante aproximadamente
20 minutos.

Para Sudamrica

Grabacin de pistas MP3

Pulse [SETUP] para seleccionar


SLEEP.

Ecualizador preconfigurado

Pulse [SETUP] para seleccionar


REC MODE.

Pulse [USB REC 7/9] para iniciar la


grabacin.

El temporizador de apagado automtico


apagar el sistema despus de la hora
configurada.

Preparacin
Configure el reloj.

Introduzca el disco que desea grabar.

Pulse [R, T] para seleccionar


NORMAL o HI-SPEED y despus
pulse [OK].

Otros

Efectos de sonido

Grabacin a alta velocidad

Este sistema tambin puede recibir emisiones


de AM asignadas en pasos de 10 kHz.

BLUETOOTH

Puede cambiar el modo de vnculo para


adecuarse al tipo de conexin.

Pulse [USB REC 7/9] para iniciar la


grabacin.
Se visualiza el nombre de la carpeta que
contiene la grabacin.

Pulse [2/3] o [5/6] para


sintonizar la estacin.

ALL REPEAT

Uso de la unidad principal

Seleccionar 1-TRACK
(ZMen de
reproduccin).

Pulse [8]. Se visualiza


WRITING.

USB

Pulse [PLAY MENU] para seleccionar


PLAYMODE.

Reproducir una pista


seleccionado.
Pulse [2/3] o [5/6]
para seleccionar la pista.

Seleccionar
OFF PLAYMODE
(ZMen de
reproduccin).

Detener la
grabacin

Pulse [R, T] para seleccionar un nmero


preconfigurado y despus pulse [OK].
Realice los pasos 3 al 5 nuevamente para
preconfigurar ms estaciones.
La estacin ms reciente reemplazar
cualquier estacin que ocupe el mismo
nmero preconfigurado.

Pulse [R, T] para seleccionar


MANUAL y despus pulse [OK].

Seleccin de una emisora


preconfigurada

Pulse [PLAY MENU].

4
5

CD

1-TRACK

Pulse [ ].
Si visualiza PAIRING, contine con el
paso 4.

Pulse [PLAY MENU] para seleccionar


TUNE MODE.

Uso de la unidad principal

Men de reproduccin

Puede conectar y reproducir un dispositivo de


audio de manera inalmbrica a travs de
Bluetooth.

CD USB BLUETOOTH

Cancela la configuracin.

Preparacin
Si este sistema est conectado a un dispositivo
Bluetooth, desconctelo (ZDesconexin del
dispositivo).

2
3

CD-DA
Prepare el modo de reproduccin del
disco.

Asegrese de que el disco se detenga.


Radio
Sintonice la estacin de radio.
Equipo externo
Conecte y reproduzca desde el equipo
(ZEquipo externo).

El sintonizador presintonizar en los


canales, en orden ascendente, todas las
emisoras que pueda recibir.
Para cancelar, pulse [8].

Preconfiguracin manual

Grabar una
pista
especificada

La sintonizacin comienza
desde la frecuencia ms baja.

Temporizador de apagado
automtico

Cmo borrar las pistas grabadas

Seleccione la fuente que desea grabar.

Grabar todas
las pistas

Pulse [R, T] para seleccionar


LOWEST o CURRENT y despus
pulse [OK].

CURRENT La sintonizacin comienza


desde la frecuencia actual.

Ver informacin disponible

Pulse [DISPLAY].

Pulse [PLAY MENU] para seleccionar


A.PRESET.

LOWEST

Se memorizar la posicin.
Se visualiza RESUME.
Pulse nuevamente para detener
totalmente.

OFF
PLAYMODE

Emparejar un dispositivo

USB

Puede ver la informacin disponible, como el


lbum MP3 y el nmero de pista, en el panel de
visualizacin.

Pulse [USB/CD] para seleccionar


USB A o USB B.
Indicador de estado USB se ilumina en rojo
cuando se seleccionado.

Nota:
Algunas pistas pueden requerir mayor tiempo de
grabacin.
Algunas pistas no pueden ser reproducidas
debido a la condicin de la fuente.
Cuando graba desde un disco MP3, el nombre
del archivo grabado es diferente al archivo
original.
Cuando graba desde USB A , el nombre del
archivo grabado es el mismo que el archivo
original (32 caracteres como mximo).

Grabacin bsica

Preconfiguracin automtica

CD USB BLUETOOTH

Pulse [USB/CD] para seleccionar CD.

Reduzca el volumen y conecte el


dispositivo USB al puerto USB.
Sujete la unidad principal al conectar o
desconectar el dispositivo USB.

Puede preconfigurar hasta 30 emisoras de FM


y 15 de AM.

Reproduccin bsica

Bluetooth

Instale la pila de modo que los polos (+ y )


queden alineados con los del control remoto.

Nota:
Mantenga sus bocinas a ms de 10 mm de la
unidad principal para que haya ventilacin.
Coloque las bocinas sobre una superficie plana
segura.
Estas bocinas no disponen de blindaje
magntico. No las ponga cerca de televisores,
computadores personales y otros equipos a los
que afecte fcilmente el magnetismo.
Realizar la reproduccin a altos niveles durante
un perodo prolongado puede provocar daos
en las bocinas y reducir la vida til de ellas.
Baje el volumen en las siguientes condiciones
para evitar daos:
Cuando se distorsiona el sonido.
Cuando ajuste la calidad del sonido.

Pulse [PLAY MENU] para seleccionar


DISCONNECT?.

Nota:
Un dispositivo se desconecta cuando:
Seleccionar una fuente diferente.
Mueve el dispositivo fuera del alcance mximo.
Desactiva la transmisin Bluetooth del
dispositivo.
Apaga el sistema o el dispositivo.

Use una pila alcalina o de manganeso.

Utilice solamente las bocinas


suministradas.
Puede daar el sistema y disminuir la calidad
del sonido si usa otras bocinas.

Nota:
No use un cable de extensin USB. El sistema no
puede reconocer el dispositivo USB conectado a
travs de un cable.

Las bocinas izquierda y derecha son iguales.


No puede quitar la red de las bocinas.

Pulse [ ].

Nota:
Segn el dispositivo Bluetooth, algunas
operaciones pueden no funcionar.

Preparacin
Antes de conectar su dispositivo USB al
sistema, asegrese de realizar una copia de
respaldo de los datos.

Colocacin de las bocinas

1
2

Pulse [CD x] (unidad principal:


[x OPEN/CLOSE]) para abrir la bandeja
del disco.
Coloque un disco con la etiqueta hacia
arriba.
Pulse nuevamente para cerrar la bandeja
del disco.

USB

N Seleccionar lbum MP3 o pista

Conecte la antena interior de FM.


Coloque la antena donde la recepcin sea
la mejor.

Disco

M Sensor del control remoto

Pulse [ALBUM/TRACK] para seleccionar


lbum o pista.
Buscar pistas o lbumes
Gire [MULTI CONTROL] para buscar.
Para iniciar la reproduccin de la seleccin,
pulse [4/9].

Sintonizacin manual
1

Cmo preparar los medios

L Seleccionar los efectos de sonido


Distancia: A aproximadamente 7 m
ngulo: Aproximadamente 20 hacia arriba
y hacia abajo, 30 a la izquierda y
derecha

Este sistema puede reproducir o grabar hasta


800 carpetas (un mximo de 999 pistas en un
lbum) o un total de 8000 pistas, dependiendo
de la capacidad de almacenamiento disponible
del dispositivo USB en USB B .

Desconexin del dispositivo

Saltar

G Abrir o cerrar la bandeja del disco


visualizacin
Para cancelar, pulse el botn nuevamente.

Conecte la antena de cuadro de AM.


Ponga la antena en posicin vertical sobre
su base hasta que haga clic.

Cmo ahorrar energa


El sistema consume una pequea cantidad
de corriente alterna, incluso cuando est en
modo de espera. Desconecte la fuente de
alimentacin cuando no use el sistema.
Se perdern algunas configuraciones
cuando desconecte el sistema. Tendr que
configurarlas nuevamente.

F Seleccionar o confirmar la opcin

Archivo MP3 en el dispositivo USB


Este sistema puede acceder hasta:
800 lbumes (incluye la carpeta raz)
8000 pistas
999 pistas en un lbum

Al enchufe de
conexin a la
red de CA

E Ver la informacin del contenido

H Disminuir el brillo del panel de

Preparacin
Pulse [RADIO/AUX] para seleccionar FM o
AM.

Presintonizacin de la memoria

espera/conectada [`], [1]


Pulse este interruptor para cambiar del
modo de alimentacin conectada al modo
de alimentacin en espera o viceversa. En
el modo de alimentacin en espera, la
unidad consume una pequea cantidad de
corriente.

B Seleccionar la fuente de audio

A Interruptor de alimentacin en

Este sistema puede reproducir CD-R/RW


con contenido formato CD-DA o MP3.
Antes de realizar la reproduccin finalice el
disco en el equipo en el que se grab.
Algunos CD-R/RW no se pueden reproducir
debido a la condicin de la grabacin.

Archivo MP3 en el disco


Este sistema puede acceder hasta:
255 lbumes (incluye la carpeta raz)
999 pistas
20 sesiones
Los discos deben cumplir con la norma
ISO9660 nivel 1 2 (excepto para los
formatos extendidos).

Lleve a cabo los procedimientos con el


control remoto. Usted tambin puede usar
los botones de la unidad principal si son
iguales.

Nota sobre el disco

Nota sobre el archivo MP3

809-200-8000

Visin general de los


controles

Cmo grabar

Pulse y mantenga pulsado [ PAIRING]


hasta que se visualice PAIRING.

1-801-811-PANA
(1-801-811-7262)
800-390-602
Desde telfono celular:
797-5000

Radio

Uso de la unidad principal

El Salvador 800-PANA (800-7262)


Verifique e identifique los accesorios
suministrados.

Nota:
Para conectarse, un dispositivo debe estar
emparejado.
El sistema slo puede conectarse a un
dispositivo a la vez.
Cuando BLUETOOTH es la fuente
seleccionada, este sistema se conectar al
ltimo dispositivo conectado y lo probar
automticamente.

Pulse [PLAY MENU] para seleccionar


INPUT LEVEL.
Pulse [R, T] para seleccionar
NORMAL o HIGH y despus pulse
[OK].

Nota:
No puede ajustar el nivel de entrada durante la
grabacin.
Seleccionar NORMAL (normal) si el sonido
est distorsionado durante un nivel de entrada
HIGH (alto).
Los componentes y los cables se venden por
separado.
Si desea conectar otros equipos que no sean los
mencionados anteriormente, consulte su
distribuidor de equipos de audio.
Puede ocurrir distorsin en el sonido cuando
usa un adaptador.

Bluetooth
No se puede emparejar.
Revise la condicin del dispositivo Bluetooth.
El dispositivo est fuera del rango de
comunicacin de 10 m. Mueva el dispositivo
ms cerca del sistema.
No se puede conectar el dispositivo.
El emparejado del dispositivo no fue exitoso.
Realice el emparejamiento nuevamente.
El emparejamiento del dispositivo a sido
reemplazado. Realice el emparejamiento
nuevamente.
Este sistema puede estar conectado a un
dispositivo diferente. Desconecte el otro
dispositivo e intente volver a emparejar el
dispositivo.
El sistema puede tener un problema. Apague el
sistema y despus vuelva a encenderlo.
El dispositivo est conectado pero audio no se
puede escuchar en el sistema.
Para algunos dispositivos con Bluetooth
incorporado, tiene que fijar manualmente la
salida de audio a SC-AKX200. Lea las
instrucciones de operacin del dispositivo para
obtener ms detalles.

Se interrumpe el sonido del dispositivo.


El dispositivo est fuera del rango de
comunicacin de 10 m. Mueva el dispositivo
ms cerca del sistema.
Retire cualquier obstculo entre el sistema y el
dispositivo.
Otros dispositivos que usan la banda de
frecuencia de 2.4 GHz (router inalmbrico,
microondas, telfonos inalmbricos, etc.) estn
haciendo interferencia. Mueva el dispositivo ms
cerca del sistema y aljelo de otros dispositivos.
Seleccionar MODE 1 para comunicacin
estable.

Radio
El sonido est distorsionado.
Utilice una antena exterior de FM opcional. Esta
antena debe ser instalada por un tcnico
competente.
Se oye un sonido rtmico.
Apague el televisor o seprelo del sistema.
Separe los telfonos mviles del sistema si las
interferencias resultan evidentes.
Cuando el sintonizador est en modo AM,
seleccionar la configuracin B.PROOF que
proporciona la mejor recepcin.

Para configurar el cdigo en


REMOTE 1

ADJUST CLOCK
El reloj no est configurado. Ajuste el reloj.
ADJUST TIMER
El temporizador de reproduccin y/o grabacin
no est configurado. Ajuste usar el temporizador
de reproduccin y/o de grabacin.
ALB FULL
La cantidad de lbumes excedi el lmite
admitido.
AUTO OFF
El sistema no se us durante 20 minutos y se
apagar en un minuto. Para cancelar, pulse
cualquier botn.
CANT REC
DEVICE FULL
Usted no puede grabar debido a que el tiempo
de grabacin restante del dispositivo USB es
menor que el tiempo total de la entrada de
msica. Cmbielo con un dispositivo USB que
tenga tiempo de grabacin suficiente y haga
nuevamente la grabacin.
ERROR
Se realiz una operacin incorrecta. Lea las
instrucciones e intentar nuevamente.
ERROR (durante la grabacin)
No puede seleccionar otra fuente de
reproduccin (ejemplo: radio, USB, etc.) o pulse
[2/3] o [5/6] durante la grabacin.
Detenga la funcin de grabacin.
No podr abrir la bandeja del disco cuando
grabe desde una fuente AM.
F61
Compruebe y corrija la conexin de los cables
de las bocinas.
Desconecte el dispositivo USB. Apague el
sistema y despus vuelva a encenderlo.
F70
Compruebe la conexin Bluetooth.
Desconecte el dispositivo Bluetooth. Apague el
sistema y despus vuelva a encenderlo.
F76

Hay un problema con el suministro de corriente.


Desconecte el cable de alimentacin de CA y
consulte a su distribuidor.
F77
Desconecte el cable de alimentacin de CA y
consulte a su distribuidor.
NO DEVICE
El dispositivo USB no est conectado.
Compruebe la conexin.
No puede grabar ni ver el espacio de
almacenamiento disponible porque no hay un
dispositivo USB conectado a USB B .
NO DISC

No introdujo un disco.
NO PLAY
UNSUPPORT
Compruebe el contenido. Slo puede reproducir
el formato soportado.
Los archivos en el dispositivo USB pueden estar
corruptos. Formatear el dispositivo USB e
intentar nuevamente.
El sistema puede tener un problema. Apague el
sistema y despus vuelva a encenderlo.
NO TRACK
No existe un lbum o pista en el dispositivo
USB.
PLAYERROR
Est reproduciendo un archivo MP3 no
compatible. El sistema saltar esa pista y
reproducir la siguiente.
REC ERROR
Desconect el dispositivo USB durante la
grabacin. Conecte el dispositivo USB y vuelva
a grabar.
Ocurri un error durante la grabacin en el USB.
Desconecte el dispositivo USB y a continuacin
vulvalo a conectar.
REMOTE 1
REMOTE 2
El control remoto y la unidad principal estn
usando diferentes cdigos. Cambie el cdigo en
el control remoto.
Cuando se visualice REMOTE 1, pulse y
mantenga pulsado [OK] y [ ] durante al
menos 4 segundos.
Cuando se visualice REMOTE 2, pulse y
mantenga pulsado [OK] y [USB/CD] durante al
menos 4 segundos.
TEMP NG
El circuito de proteccin de temperatura se ha
activado y el sistema se apagar. Deje que la
unidad se enfre antes de volver a encenderla.
Revise que la abertura de ventilacin de la
unidad no est obstruida.
Asegure que esta unidad est bien ventilada.
TRK FULL
La cantidad de archivos excedi el lmite
admitido.
USB OVER CURRENT ERROR
El dispositivo USB absorbe demasiada
potencia. Desconecte el dispositivo USB,
apague el sistema y despus vuelva a
encenderlo.
VBR
El sistema no puede visualizar el tiempo de
reproduccin restante para las pistas con
velocidad de bits variable (VBR).

Pulse y mantenga pulsado [OK] y [ ]


durante al menos 4 segundos.

Restablecer memoria del sistema


Restablezca la memoria cuando ocurren las
siguientes situaciones:
Los botones no funcionan.
Usted desea borrar y restablecer el
contenido de la memoria.

1
2

Se oye un leve zumbido durante las emisiones


de AM.
Aleje la antena de otros cables y conductores.

Pantalla de la unidad principal

Pulse y mantenga pulsado [USB/CD] en


la unidad principal y [ ] en el control
remoto hasta que se visualice
REMOTE 1.

Desconecte el cable de alimentacin de


CA.
Mientras pulsa y mantiene pulsado [1]
en la unidad principal, conecte el cable
de la fuente de alimentacin
nuevamente.
Contine pulsando y mantenga pulsado el
botn hasta que se visualice
.
Suelte [1].
Todas las configuraciones se reponen a los
valores predeterminados.
Es necesario configurar los elementos de la
memoria nuevamente.

Especificaciones
Seccin del amplificador
Potencia de salida RMS en modo estreo
Canal frontal (ambos canales controlados)
200 W por canal (4 ), 1 kHz, 30% THD
Potencia total del modo estreo RMS
400 W

Seccin del sintonizador, terminales


Memoria preconfigurada 30 emisoras de FM
15 emisoras de AM
Frecuencia modulada (FM)
Gama de frecuencias
Para Sudamrica

87.50 MHz a 108.00 MHz (en pasos de 50 kHz)


Para Centroamrica y el Caribe

87.5 MHz a 108.0 MHz (en pasos de 100 kHz)


87.9 MHz a 107.9 MHz (en pasos de 200 kHz)
Terminales de la antena
75 (desequilibrado)
Amplitud modulada (AM)
Gama de frecuencias
Para Sudamrica

522 kHz a 1629 kHz (en pasos de 9 kHz)


520 kHz a 1630 kHz (en pasos de 10 kHz)
Para Centroamrica y el Caribe

520 kHz a 1710 kHz (en pasos de 10 kHz)


AUX
Entrada de audio

Seccin de discos compactos


Discos reproducidos (8 cm o 12 cm)
CD, CD-R/RW (CD-DA, MP3 )
MPEG-1 Layer 3
Lector
Longitud de onda

Cuando otro equipo Panasonic responda al


control remoto de este sistema, cambie el
cdigo del control remoto de este sistema.
Preparacin
Pulse [USB/CD] para seleccionar CD.

Para configurar el cdigo en


REMOTE 2

Pulse y mantenga pulsado [USB/CD] en


la unidad principal y [USB/CD] en el
control remoto hasta que se visualice
REMOTE 2.

790 nm (CD)

Seccin de USB
Puerto USB
USB estndar
USB 2.0 velocidad total
Compatibilidad con formato de archivos de
medios
MP3 (*.mp3)
Sistema de archivo de dispositivo USB
FAT12, FAT16, FAT32
Grabacin en USB
Velocidad de bits
128 kbps
Velocidad de grabacin USB
1x, 3x (CD solamente)
Formato de archivo de grabacin
MP3 (*.mp3)

Seccin de Bluetooth
Versin

Bluetooth Versin 2.1 + EDR

Clase

Clase 2

Perfiles admitidos

A2DP, AVRCP, SPP

Frecuencia operativa
Banda de 2.4 GHz, FH-SS
Distancia de funcionamiento
10 m de la lnea de visin

Seccin de bocinas
Bocina(s)
Bocina para graves
Bocina para agudos

Tipo cnico de 16 cm
Tipo cnico de 6 cm
4

Impedancia

Dimensiones (An x Al x Prf)


200 mm x 334 mm x 233 mm
Masa

3.3 kg

Generalidades
Fuente de alimentacin
Para Sudamrica
CA 220 V a 240 V, 50/60 Hz
Para Centroamrica y el Caribe
CA 120 V, 60 Hz
Consumo de energa
60 W
53 W

Para Sudamrica
Para Centroamrica y el Caribe

Dimensiones (An x Al x Prf)


348 mm x 193 mm x 251 mm
Masa

2.5 kg

Gama de temperaturas de funcionamiento


0C a +40C
Gama de humedades de funcionamiento
35% a 80% humedad relativa
(sin condensacin)
Consumo en el modo de espera
(aproximado)
Para Sudamrica
Para Centroamrica y el Caribe

Cdigo del control remoto

Clavija jack (1 sistema)

0.5 W
0.3 W

Consumo en el modo de espera


(aproximado)
(Con BLUETOOTH STANDBY configurado
como ON)
Para Sudamrica
0.6 W
Para Centroamrica y el Caribe
0.4 W
Nota:
Las especificaciones estn sujetas a cambios
sin previo aviso.
La masa y las dimensiones son aproximados.
La distorsin armnica total se mide con el
analizador de espectro digital.

Pulse y mantenga pulsado [OK] y


[USB/CD] en el control remoto durante al
menos 4 segundos.

Nota:
Vuelva a poner en hora el reloj frecuentemente
para mantener su exactitud.

B3 4 Portrait.indd 2

05/01/2015 5:08:08 PM

También podría gustarte