Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Problem No.2
Problem No.4
Overshooting
How I can find it :
I will find in the coverage region of a site which should be serve it with good level ,that there are another site server in it
with good level and it may cause interference.
How it can be solved :
down tilt the site which overshoot in that region to avoid interference.
Gaps (2G)
How I can find it :
When I test the coverage on a main road sometimes I find a gap between 2 sites because there are far away from each
other or one of them is down tilt.
How it can be solved :
by up tilting one of them to serve this gap.
Problem No.6
Problem No.8
Problem No.10
Problem No.12
10
11
12
Problem No.18
Co-channel interference
How I can find it :
By looking at [hopping channel] window I can fine the C/I [carrier over interference ratio] is bad . The Co-channel
interference happens when there are two frequencies [the same] interfere with each other.
How it can be solved :
Tell the operator about that frequency and the will solve the problem.
Problem No.19
Adjacent interference
How I can find it :
By looking at [hopping channel] window I can fine the C/I [carrier over interference ratio] is bad . The Adjacent
interference happens when there are two frequencies [closed together] interfere with each other.
How it can be solved :
Tell the operator about that 2 frequencies and the will solve the problem.
13
Problem No.20
14
Problem No.21
15
Problem No.22
16
Problem No.23
17
Problem No.24
18
Problem No.25
19
Problem No.26
Reselection Failed(2G-3G)
How I can find it :
In idle mode, the priority for 3G . if we are on 2G in idle mode and it does not go to 3G so reselection failed.
How it can be solved :
The integration office will solve this problem.
20
Problem No.27
Dropped Calls .
How I can find it :
it happens due to bad level and quality .
How it can be solved :
Report the operator about this problem after analyzing it ,depending on its case.
Problem No.28
Problem No.29
21